Loading…
Loading…
Tender Value
₹81.0 Cr
EMD Value
₹1.6 Cr
Closing Date
16 Sept 2026, 11:00 am
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
TENDER
20 conditions · 8 needing a document upload
Financial Eligibility Criteria: The Tenderer shall be eligible only if he fulfils the following Standard Financial Eligibility Criteria FOR WORKS COSTING ABOVE Rs.50.00 LAKHS:The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less as per advance correction slip No.1 to IRSGCC 2022 where, V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. Client certificate from other than Govt Organization should be duly supported by Form16A/26AS generated through TRACES of Income Tax Department of India. No Technical and Financial credentials are required for tenders having value upto Rs. 50 lakhs. For tenders costing more than Rs. 20 crore, eligibility criteria include bidcapacity also as specified in Clause 10.3 of IRSGCC April 2022-PART-I and as per ACS No.1 of IRSGCC 2022."Regulationsfor Tenders and Contracts - For the Guidance of Engineers & Contractors for Works Contracts." The tender/technical bid will be evaluated based on bid capacity formula detailed in Proforma2 of Proforma set.The tenderer will be qualified only if its available bid capacity is equal to or more than the total bid value of the present tender.
In support of Financial Eligibility Criteria: The tenderers shall submit requisite information as per Annexure-VIB, vide para 10.2, Part I of GCC 2022 along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet
FILLING OF RETURNS REGARDING GST : "The tenderers in their bids shall indicate the details of their Jurisdictional Assessing Officers (Desgination, 1.1.1 address & email ID).In case of a contract award, a copy of the LOA / Purchase order shall be immediately forwarded by Purchaser to the Jurisdictional Assessing Officers mentioned in the Tenderer's bid"
A) Technical eligibility criteria for non-composite works costing above Rs.50.00 lakhs Asper clause 10.1(a) of IRGCC-2022 ( part-1) :. (a)The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: 1.Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, Or 2.Two similar works each costing not less than the amount equal to 40% of advertised value of the tender or 3.One similar work each costing not less than the amount equal to 60% of advertised value of the tender B ) Technical eligibility for composite tender: 1.Each component of value more than 2 Crs shall be taken for evaluation of technical eligibility as per 10.1(b) of IRSGCC-2022. 2.In case single completion certificate containing more than one component is submitted by the tenderer, value of each component is to be specified in that completion certificate. Separate completed works of minimum required values for each component shall also be considered for fulfilment of technical eligibility criteria 3. In case tenderer fails to submit completion certificate with component wise value bifurcation of work for evaluation of technical eligibility, the certificate shall be treated Incomplete and invalid and shall not be considered for evaluation of technical eligibility. 4.Technical eligibility shall be fulfilled by tenderer or any member having minimum 26% share in case of JV as per clause 10.1.(b)(i)of IRSGCC- 2022(Part-I)and17.15.1(a)and(b)of IRSGCC-2022( Part-I)&as per ACS No.1 for the component /components of value of more than 50%of tender value or by Sub- contractor as per clause7(a)(ii) of GCC (Part-II) for the other component/ components of value less than 50% of tender value. Each other member of JV shall have technical capacity of minimum 10% of advertised value of any component. 5. If the Tenderer proposes to subcontract any component/ components as per item 4 above , which is less than 50%of tender value, then a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the sub- contractor(s) and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility as per clause 7(a)(ii) of Part II of IRSGCC 2022. 6.For component less than Rs2Cr,technicalEligibilitywill not be considered in tender evaluation and the documents of sub-contractor need not be submitted along with tender.7.The contractor will engage an eligible sub-contractor after award of contract with the approval of Chief Engineer in writing subject to complying clause 7 of Part II of IRSGCC 2022 . Note: Tenderers may see Explanation for Para10 of the Tender Form (Second Sheet) including Para10.1 to 10.5- Eligibility Criteria of IRSGCC-2022.Clauses as per GCC 2022 as amended from time to time is applicable. NOTE:(i)The Experience Certificates are to be Attached to the e-offer as per Proforma- 1 in the proforma set of tender document.
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turn over of Rs. 500crore and above in last 3 financial years excluding the current financial year,listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. The work executed by the tenderer for any Govt. /Govt. bodies/ PSUs and public listed company shall only be considered for fulfilling of Technical Eligibility Criteria. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate
Uploading of Certificate in regard to restrictions on procurement from a bidder of a country which shares a land border with India as per clause 27 of SCC 2025
Uploading of Certificate in regard to restrictions on procurement from a bidder of a country which shares a land border with India and on sub- contracting to contractors from such countries as per clause-27 of SCC 2025
The Tenderer shall be eligible only if he fulfills the following Standard Technical Eligibility Criteria :- The tenderer should furnish with his tender offer the particulars of the Electrical license held by him. The work shall be carried out by a Tenderer/Contractor holding a valid ELECTRICAL SUPER GRADE LICENCE issued by any state Government for carrying out the installation work of the voltage classes involved, under the direct supervision of the persons holding valid certificates of competency for the same voltage classes issued or recognized by the State Government. The successful tenderer shall furnish the names and particulars of certificates of competency of the supervisors and workmen to be engaged for carrying out this work.
SIMILAR NATURE OF WORK : Works of erection of over head line or laying of power cable of 66 KV or above, including charging and commissioning with or without supply of cables / overhead lines.
119 conditions · 4 needing a document upload
Uploading of Scanned copy/copies of proof(s) of Technical Eligibility Criteria as mentioned in Standard Technical Criteria (as per Pro forma - 1).
Uploading of scanned copy of work experience certificate issued by public listed company, copy of work order, bill of quantities, bill wise details of payment received duly certified by charted accountant, TDS certificates for all payments received and copy of final/last bill paid by company etc.as per Note for clause 10.1of IRGCC - April-2022
Uploading of Form 16A/26AS generated through TRACES of Income Tax Department of India, if Client certificate is from other than Govt. Organization
Uploading of Scanned copy/copies of proof(s) of Technical Eligibility Criteria as per clause 7, Part-II of IRSGCC-2022, in case the main tenderer proposes execution of any of components mentioned in tender through subcontractor in a composite work as specified in clause10.1(b)(3) of IRSGCC-April-2022.
Uploading a scanned copy of Standard Format for Certificate as per Annexure V of IRSGCC-April-2022 linked under heading submission of Standard Format for Certificate.
Uploading of Certificate in regard to restrictions on procurement from a bidder of a country which shares a land border with India as per clause 27 of SCC 2025.
Uploading of Certificate in regard to restrictions on procurement from a bidder of a country which shares a land border with India and on sub-contracting to contractors from such countries India.
Uploading a scanned copy of Registration Certificate by Start-up firms issued by appropriate authority and recognized by Department of Industrial Policy and Promotion (DIPP) towards exemption of full Bid security and Registration Certificate with registration number by Labour Co-operative Society issued by appropriate authority or payment of 50% Bid security.
Form-4 (Alternative Proposal of the Tenderer):Have you submitted Form-4
Have you attached the digitally signed copy of tender document
Form 11C: Have you submitted Form11C i.e. Complete technical data and particulars of equipment
Form-12D: Have you submitted Form 12D i.e. Details of existing commitments and balance amount of ongoing works.
Uploading of required documents in case of Individual or propriety firm /concern or partnership firm or company or joint venture firm / HUF / Society /LLP etc., as mentioned in technical compliance (whichever is applicable)
Uploading a scanned copy of the Memorandum of Understanding in the case of a JV firm (as per Form 23 (Proforma 7of Proforma set)).
Uploading of Scanned copy of Bid capacity (as per Annexure II of Part I,Chapter I of Tender document (Proforma - 2 of Proforma set)) and in terms of clause 10.3&10.5 of IRSGCC- April-2022
Uploading of Scanned copy of the declaration regarding employment of Retired Engineer / Retired Railway Officer (as per Pro forma - 6 of Proforma set).
Uploading of Proforma (Proforma-9 of Proforma set) attached with Tender Document for self- Certificate in regard to meeting the Minimum Local Content requirements as per Make in India Policy for Procurement Order Value less than of Rs.10Crores
Uploading of (Proforma-10 of Proforma set) of Certificate on percentage of Local Content as per Make in India Policy for Procurement Order Value more than Rs.10 Crores
Form-24 (Proforma 5 of Proforma set): Have you submitted Form-24 (Proforma 5 of Proforma set)i.e.,Bank details, GST & PAN
Form-1A (Annexure I of Part I, IRSGCC 2022 (Offer Letter)): Have you submitted Offer Letter i.e., Form-1A (Annexure I of Part I, IRSGCC 2022) with details of reporting of employment, mobilization advance and LC arrangements if any.
Uploading of Scanned copy of Statement of payment received in the Last three financial years and the current financial year (as per Pro forma- 2A) along with copies of relevant supporting documents as stipulated.
Uploading of digitally signed copy of the details of construction machinery, Tools and plants, Vehicles etc.in Proforma 3 of proforma set of tender document.
The tenderer whether sole proprietor/Company or a partnership firm/JV venture (JV) / Registered Society / Registered Trust/HUF etc., if they want to act through agent or individual(s), should submit along with tender, a copy of Power of attorney duly stamped and authenticated by a notary public or by magistrate in favour of specific persion whether he/they be partner(s) of the rm or any other person agreement, receive money, co-ordinate measurement through contractors authorized engineer, witnessed measurement, sign measurements books, compromise, settle, relinquish any claim(s) preferred by the firm and sign " No Claim Certicate" and refer all or any disputes to arbitiration the above power of attorney shall be submitted even if such specific person is authorized for above purpose through partnership deed/memorandum of understanding/Article of Association or such other document, failing which, tender is liable to be rejected.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Any other document required for evaluation of his/their bid as deemed fit by the tenderer.
In case of Proprietary Firm / Proprietary Concern, the tenderers shall scan and submit with his offer (i)An undertaking that he is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which he was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (ii) All other documents in terms of explanatory notes in clause 10 of IRSGCC-April-2022-Part-I. (iii) All other documents as per Clause 14 of IRSGCC-April-2022 - Part-1.
In case of Partnership Firm, the tenderer(s) shall scan and submit with their offer, the following documents: (i)A notarized copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar. (ii) A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission ofbids, either in their individual capacity or in any firm/LLP in which they were /are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract. (iv)Other documents as mentioned in terms of explanatory notes in clause 10 of IRSGCC April-2022-Part I. (v) All other documents as per Clause 14 and Clause 18of IRSGCC-April-2022-Part I.Conditions as per IRSGCC April 2022 &ACS.2,as amended from time to time is applicable.
In case, the Tenderer is a Company, the tenderer(s) shall scan and submit with their offer, the following documents:(i)The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms of explanatory notes in clause 10 of IRSGCC April-2022-Part I. (v) All other documents as per Clause 14 of IRSGCC-April-2022-Part 1.
In case, the Tenderer is a JV Firm, the tenderer(s) shall scan and submit with their offer the following documents: (A)In case one or more of the members of the JV is/are Partnership firm(s): (1) A notarized copy of the Partnership Deedor a copy of the Partnership deed registered with the Registrar. (2) A copy of consent of all the partners or individual authorized by partnership firm, to enter into the Joint Venture Agreement on a stamp paper, (3) A notarized or registered copy of Power of Attorney in favour of the individual to sign the MOU/JV Agreement on behalf of the partnership firm and create liability against the firm. (4) An undertaking by all partners of the partnership firm that they are not black listed or debarred by Railways or any other Ministry/ Department of the Govt.of India from participation in tenders/contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were/are partners/members. Any Concealment/wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract. (B)In case one or more members is/are HUF: (1) A copy of notarized affidavit on Stamp Paper declaring that his Concern is a proprietary Concern and he is sole proprietor of the Concern OR he who is signing the affidavit on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (C) In case one or more members of the JV is/are Companies: (1) A copy of resolutions of the Directors of the Company, permitting the company to enter into a JV agreement, (2) A copiesof MOA (Memorandum of Association)/AOA (Articles of Association) of the company (3)A copy of Certificate of Incorporation (4) A copy of Authorization/copy of Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender, sign MOU/JV Agreement on behalf of the company and create liability against the company. (D) In case one or more members of the JV is/are LLP firm/s: (1) A copy of LLP Agreement (2) A copy of Certificate of Incorporation of LLP (3) A copy of resolution passed by partners of LLP firm, permitting the Firm to enter into a JV agreement (4) A copy of Authorization/copy of Power of Attorney issued by the LLP firm (backed by resolution passed by the Partners) in favour of the individual, to sign the tender and/or sign the MOU/ JV agreement on behalf of the LLP and create liability against the LLP. (5) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry/Department of the Govt.of India from participation in tenders/contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were/are partners/members. Any Concealment/wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (E) In case one or more members of the JV is/are Society/s or Trust/s: (1) A copy of Certificate of Registration (2) A copy of Memorandum of Association of Society/Trust Deed (3) A copy of Rules & Regulations of the Society (4) A copy of Power of Attorney, in favour of the individual to sign the tender documents and create liability against the Society/ Trust.
Conditions as per IRSGCC April 2022 & ACS.2,as amended from time to time is applicable as above para.6
In case the Tenderer is HUF, the following documents shall be submitted along with the tender: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) Anundertaking that the HUF is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which HUF was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (iii) All other documents in terms of explanatory notes in clause 10 of IRSGCC-April-2022. (iv) All other documents as perClause14 of IRSGCC-April-2022-Part1.Conditions as per IRSGCC April 2022 & ACS.2,as amended from time to time is applicable.
In case tenderer is a LLP Firm registered under LLP Act-2008, the following documents shall be submitted: (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders /contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment/wrong information in regard to above shall make the contractliable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of explanatory notes in clause 10 of IRSGCC-April-2022-Part-I. (vi) All other documents as per Clause 14 of IRSGCC-April-2022- Part1.Conditions as per IRSGCC April 2022 & ACS.2,as amended from time to time is applicable.
In case the Tenderer is a Registered Society & Registered Trust, the following documents shall be submitted: (i) A copy of the Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents andcreate liability against the Society/Trust. (iv) All other documents in terms of explanatory notes in clause 10 of IRSGCC-April-2022-PartI. (v) All other documents as per Clause14 of IRSGCC-April-2022-PartI.
Uploading of Scanned copy/copies of formal agreement duly executed and notarized by the main tenderer/contractor with the subcontractor for the component(s) of work in a composite work proposed to be executed through subcontractor(s).
The tenderer whether sole proprietor / a company or a partnership firm / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with thetender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s)of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed/ Memorandum of Understanding/ Article of Association/ Board resolution, failing which tender shall be summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner (s) of the firm or any other person , shall be submitted after award of work , specifically authorizing him/ them to deal with all other contractual activities subsequent to signing of agreement , if required. Note: A Power of Attorney executed and issued overseas , the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of attorney is being issued, However , the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Appostille certificate
Scanned copy of Statement of Bank details, PAN & GST (as per Form 24 (Proforma 5 of Proforma set)).
Request for Mobilization Advance if applicable (as per Proforma- 8 of Proforma set).
Proforma-9 of Proforma set for self-Certificate in regard to meeting the Minimum Local Content requirements as per Make in India Policy for Procurement Order Value less than of Rs.10 Crores. (as per clause 23.8 (a) of Special Conditions of Contract).
Proforma-10 (Proforma set) of Certificate on percentage of Local Content as per Make in India Policy for Procurement Order Value more than Rs.10 Crores.(as per clause 23.8 (b) of Special Conditions of Contract)
Modification/Shifting of Existing EHT/HT/LT Power Line Crossings and Shifting of Electrical Utilities in connection with Various Railway Projects under Construction Organization, Bangalore Cantonment.
ECN-03-2026~SWR
ECN-03-2026
Open
Works - General
24 Months
Dharwad, Karnataka
₹0
₹1.6 Cr
25 Aug 2026
25 Aug 2026
2 Sept 2026
313 items across 6 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 37,65,50,991 | ||
| — | 750.00 | — | — | ||
| Design Fabrication, Galavanising and supply of Mild-Steel Transmission Line Towers including extension, Stubs | — | — | — | 11,27,43,000 | |
| — | 750.00 | — | — | ||
| Design Fabrication, Galavanising and supply of High Tensile - Steel Transmission Line Towers including extension, Stubs | — | — | — | 12,06,39,750 | |
| — | 138.00 | — | — | ||
| Supply of Galvanized Bolt & Nuts with washers | — | — | — | 2,18,56,026 | |
| — | 138.00 | — | — | ||
| Phase plates (Set of 6 per Towers) | — | — | — | 88,734 | |
| — | 138.00 | — | — | ||
| Caution/DangerPlates(1 No. per Tower) | — | — | — | 53,406 | |
| — | 138.00 | — | — | ||
| Circuit Plates (Set of 2 per Tower) | — | — | — | 1,06,674 | |
| — | 138.00 | — | — | ||
| Number Plates (1 No. per Tower) | — | — | — | 53,406 | |
| — | 138.00 | — | — | ||
| Grounding of Towers including cost of 40mm dia 2.5mm thick, class 'C' GI Pipe of 3 mtrs length as per KPTCL specfication, with 50x6 mm GI flats 3 mtr long, salt charcoal , including excavation charges | — | — | — | 13,26,180 | |
| — | 138.00 | — | — | ||
| Earth bonds 300mm long | — | — | — | 78,798 | |
| — | 138.00 | — | — | ||
| Earth bonds 450mm long | — | — | — | 90,252 | |
| — | 72000.00 | — | — | ||
| LYNX ACSR Conductor | — | — | — | 1,85,76,000 | |
| — | 58500.00 | — | — | ||
| DRAKE ACSR Conductor | — | — | — | 3,08,88,000 | |
| — | 31500.00 | — | — | ||
| Ground Wire 7/3.15 mm | — | — | — | 33,39,000 | |
| — | 18000.00 | — | — | ||
| AAAC moose conductor | — | — | — | 1,36,08,000 | |
| — | 288.00 | — | — | ||
| Double Tension Clamps with Arcing Horns for LYNX ACSR Conductor | — | — | — | 16,36,128 | |
| — | 576.00 | — | — | ||
| Single Tension Clamps with Arcing Horns for LYNX ACSR Conductor | — | — | — | 11,50,272 | |
| — | 288.00 | — | — | ||
| Double Suspension Clamps with Arcing Horns for LYNX ACSR Conductor | — | — | — | 13,32,000 | |
| — | 576.00 | — | — | ||
| Single Suspension Clamps with Arcing Horns for LYNX ACSR Conductor | — | — | — | 13,96,224 | |
| — | 288.00 | — | — | ||
| 110 kV, 90 KN Tension Type Composite Polymer Long Rod Insulator with sectional length - 1160 mm (String = Set) for LYNX ACSR Conductor | — | — | — | 23,34,240 | |
| — | 576.00 | — | — | ||
| 110 kV, 90KN Suspension Type Composite Polymer Long Rod Insulator with sectional length - 1015 mm (String = Set)for LYNX ACSR Conductor | — | — | — | 34,80,192 | |
| — | 288.00 | — | — | ||
| Double Tension Clamps with Arcing Horns for DRAKE ACSR | — | — | — | 23,44,608 | |
| — | 576.00 | — | — | ||
| Single Tension Clamps with Arcing Horns for DRAKE ACSR Conductor | — | — | — | 26,32,896 | |
| — | 288.00 | — | — | ||
| Double Suspension Clamps with Arcing Horns for DRAKE ACSR | — | — | — | 15,60,672 | |
| — | 576.00 | — | — | ||
| Single Suspension Clamps with Arcing Horns for DRAKE ACSR | — | — | — | 16,44,480 | |
| — | 288.00 | — | — | ||
| 66 kV, 90 KN Tension Type Composite Polymer Long Rod Insulator with sectional length - 725mm (String = Set) | — | — | — | 8,86,176 | |
| — | 576.00 | — | — | ||
| 66kV, 90KN Suspension Type Composite Polymer Long Rod Insulator with sectional length - 580 mm (String = Set) | — | — | — | 17,08,992 | |
| — | 216.00 | — | — | ||
| Double Tension Clamps with Arcing Horns for Coyote ACSR Conductor | — | — | — | 11,39,616 | |
| — | 432.00 | — | — | ||
| Single Tension Clamps with Arcing Horns for Coyote ACSRConductor | — | — | — | 7,88,832 | |
| — | 216.00 | — | — | ||
| Double Suspension Clamps with Arcing Horns forCoyote ACSRConductor | — | — | — | 9,87,336 | |
| — | 432.00 | — | — | ||
| Single Suspension Clamps with Arcing Horns for Coyote ACSR Conductor | — | — | — | 9,68,112 | |
| — | 216.00 | — | — | ||
| 66 kV, 90 KN Tension Type Composite Polymer Long Rod Insulator with sectional length - 725mm (String = Set)for Coyote ACSR Conductor | — | — | — | 6,65,064 | |
| — | 432.00 | — | — | ||
| 66kV, 90KN Suspension Type Composite Polymer Long Rod Insulator with sectional length - 580 mm (String = Set)for Coyote ACSR Conductor | — | — | — | 12,64,464 | |
| — | 72.00 | — | — | ||
| Double Tension Clamps with Arcing Horns for AAAC Moose Conductor | — | — | — | 6,44,832 | |
| — | 144.00 | — | — | ||
| Single Tension Clamps with Arcing Horns for AAAC Moose Conductor | — | — | — | 7,24,032 | |
| — | 72.00 | — | — | ||
| Double Suspension Clamps with Arcing Horns for AAAC Moose Conductor | — | — | — | 4,29,192 | |
| — | 144.00 | — | — | ||
| Single Suspension Clamps with Arcing Horns for AAAC Moose Conductor | — | — | — | 4,52,448 | |
| — | 72.00 | — | — | ||
| 220kV, 120KN Tension Type Composite Polymer Long Rod Insulator with sectional length - 2175mm (String = Set)for AAAC Moose Conductor | — | — | — | 5,39,208 | |
| — | 144.00 | — | — | ||
| 220kV, 90KN Suspension Type Composite Polymer Long Rod Insulator with sectional length - 2030mm (String = Set)for AAAC Moose Conductor | — | — | — | 10,48,320 | |
| — | 96.00 | — | — | ||
| Mid span compression joint FOR Drake ACSR CONDUCTOR | — | — | — | 1,34,304 | |
| — | 96.00 | — | — | ||
| Repair sleeves FOR Drake ACSR CONDUCTOR | — | — | — | 1,03,296 | |
| — | 576.00 | — | — | ||
| Vibration Damper for Drake ACSR CONDUCTOR | — | — | — | 10,80,576 | |
| — | 480.00 | — | — | ||
| Pre-formed Armor Rods FOR Drake ACSR CONDUCTOR | — | — | — | 19,52,160 | |
| — | 576.00 | — | — | ||
| PG Clamps FOR Drake ACSR CONDUCTOR | — | — | — | 5,66,208 | |
| — | 96.00 | — | — | ||
| Mid span compression joint FOR LYNX ACSR CONDUCTOR | — | — | — | 77,856 | |
| — | 96.00 | — | — | ||
| Repair sleeves FOR LYNX ACSR CONDUCTOR | — | — | — | 69,216 | |
| — | 576.00 | — | — | ||
| Vibration Damper for Lynx ACSR CONDUCTOR | — | — | — | 6,41,664 | |
| — | 480.00 | — | — | ||
| Pre-formed Armor Rods FOR LYNX ACSR CONDUCTOR | — | — | — | 6,32,160 | |
| — | 576.00 | — | — | ||
| PG Clamps FOR LYNX ACSR CONDUCTOR | — | — | — | 5,43,744 | |
| — | 60.00 | — | — | ||
| Mid span compression joint FOR COYOTE ACSR CONDUCTOR | — | — | — | 48,660 | |
| — | 60.00 | — | — | ||
| Repair sleeves FOR COYOTE ACSR CONDUCTOR | — | — | — | 43,260 | |
| — | 180.00 | — | — | ||
| Vibration Damper COYOTE ACSR CONDUCTOR | — | — | — | 2,21,940 | |
| — | 150.00 | — | — | ||
| Pre-formed Armor Rods FOR COYOTE ACSR CONDUCTOR | — | — | — | 2,30,250 | |
| — | 180.00 | — | — | ||
| PG Clamps Coyote ACSR FOR COYOTE ACSR CONDUCTOR | — | — | — | 1,69,920 | |
| — | 24.00 | — | — | ||
| Mid span compression joint FOR AAAC MOOSE CONDUCTOR | — | — | — | 36,864 | |
| — | 24.00 | — | — | ||
| Repair sleeves FOR AAAC MOOSE CONDUCTOR | — | — | — | 28,368 | |
| — | 144.00 | — | — | ||
| Vibration Damper for AAAC MOOSE CONDUCTOR | — | — | — | 2,96,784 | |
| — | 120.00 | — | — | ||
| Pre-formed Armor Rods FOR AAAC MOOSE CONDUCTOR | — | — | — | 5,36,760 | |
| — | 144.00 | — | — | ||
| PG Clamps Coyote ACSR FOR AAAC MOOSE CONDUCTOR | — | — | — | 2,48,976 | |
| — | 252.00 | — | — | ||
| Single Tension Clamp with arcing horns For Ground Wire | — | — | — | 3,78,252 | |
| — | 252.00 | — | — | ||
| Single Suspension Clamp with arcing horns For Ground Wire | — | — | — | 3,98,664 | |
| — | 252.00 | — | — | ||
| Mid span compression joint For Ground Wire | — | — | — | 1,39,860 | |
| — | 252.00 | — | — | ||
| Repair sleeves For Ground Wire | — | — | — | 94,500 | |
| — | 252.00 | — | — | ||
| PG Clamps For Ground Wire | — | — | — | 1,23,732 | |
| — | 12.00 | — | — | ||
| — | — | — | 30,912 | ||
| — | 12.00 | — | — | ||
| Dead End for 48F OPGW CABLE | — | — | — | 34,224 | |
| — | 12.00 | — | — | ||
| Double Tension Pass through / Passing Tension for 48F OPGW CABLE | — | — | — | 63,036 | |
| — | 24.00 | — | — | ||
| — | 24.00 | — | — | ||
| — | — | — | 1,65,696 | ||
| — | 24.00 | — | — | ||
| Vibration Damper for 48F OPGW CABLE | — | — | — | 14,304 | |
| — | 12.00 | — | — | ||
| Down Lead Clamp Assembly for 48F OPGW CABLE | — | — | — | 3,276 | |
| — | 12.00 | — | — | ||
| Joint Box for 48F OPGW CABLE | — | — | — | 1,15,632 | |
| — | 3.00 | — | — | ||
| FODP 48F : Indoor type consisting of 2 no. of rack mounted LIU (to be housed in FODP) with 24 ports each with FCPC coupling & pigtails ( for 48F OPGW CABLE) | — | — | — | 2,41,479 | |
| — | 3000.00 | — | — | ||
| FIBRE OPTIC ARMOURED APPROACH CABLE 8 Fibre (DWSM) including Installation Hardware set for 48 Approach Cable ( for 48F OPGW CABLE) | — | — | — | 7,44,000 | |
| — | 58500.00 | — | — | ||
| COYOTE ACSR Conductor | — | — | — | 1,09,98,000 | |
| — | — | — | 4,34,87,592 | ||
| — | 34.50 | — | — | ||
| Check Survey and Tower spotting etc using own equipment for 220KV/110KV/66KV Plain terrain | — | — | — | 1,40,415 | |
| — | 34.50 | — | — | ||
| Detailed Survey and Tower spotting etc using own equipment for 220KV/110KV/66KV Plain terrain | — | — | — | 7,83,219 | |
| — | 54.00 | — | — | ||
| Erection of Towers including tightening of bolts and nuts Setting up of 220kV stub template, aligning,dismantling and transportation of stub template from one location to another location | — | — | — | 3,77,946 | |
| — | 100.00 | — | — | ||
| Sorting of Tower Parts made of fabricated angle iron | — | — | — | 69,100 | |
| — | 1638.00 | — | — | ||
| Assembling and Erection of towers including tightening of bolts and nuts including loading, unloading at store and site | — | — | — | 2,04,78,276 | |
| — | 500.00 | — | — | ||
| Dismantling of existing Towers | — | — | — | 62,51,000 | |
| — | 5000.00 | — | — | ||
| Rivetting of Bolts & Nuts | — | — | — | 1,40,000 | |
| — | 5000.00 | — | — | ||
| Welding of Bolts & Nuts | — | — | — | 1,40,000 | |
| — | 1000.00 | — | — | ||
| Transportation of dismantled structures from site to KPTCL/EB store up& down journey as per ELectrical incharge instruction | — | — | — | 47,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
1-IRSGCCApril2022.pdf
ATTACHMENT
IRS GCC Correction Slip
ATTACHMENT
ACS 1
ATTACHMENT
2-IRSGCCCorrectionSlipNo-10Dated24-06-2025.pdf
ATTACHMENT
3-ACS-1GCC-2022Policy14-07-2022.pdf
ATTACHMENT
4-ACS-2GCC-2022Policy13-12-2022.pdf
ATTACHMENT
5-ACS-3GCC-2022Policy26-04-2023.pdf
ATTACHMENT
6-ACS-4GCC-2022Policy07-08-2023.pdf
ATTACHMENT
7-ACS-5GCC-2022Policy20-10-2023.pdf
ATTACHMENT
8-ACS-6GCC-2022Policy21-12-2023.pdf
ATTACHMENT
9-ACS-7GCC-2022Policy25-09-2024.pdf
ATTACHMENT
10-ACS-8GCC-2022Policy20-12-2024.pdf
ATTACHMENT
11-ACS-9GCC-2022Policy09-01-2025.pdf
ATTACHMENT
12-ACS-10GCC-2022Policy04-03-2025.pdf
ATTACHMENT
13-ACS-11GCC-2022Policy13-03-2026.pdf
ATTACHMENT
14-ACS12GCCforWorks.pdf
ATTACHMENT
15-JPOEARTHWORK.pdf
ATTACHMENT
16-ProformasetEGS.pdf
ATTACHMENT
17-SCC-11-2025.pdf
ATTACHMENT
18-EHTTechnicalSpec.pdf
ATTACHMENT
19-EHTSCCUtilityShiftingTender.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].