Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹43.5 L
EMD Value
₹87,000
Closing Date
15 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE GOLCONDA
GE GOLCONDA LANGER HOUSE OPP MILITARY HOSPITAL HYDERABAD TELANGANA-500 008
PROVN OF SIMULATORS BUILDING UNDER AGE B/R-I OF GE GOLCONDA
2023_MES_588744_1
8667/E8
Open Tender
Civil Works
Item Rate
180 days
HYDERABAD
As Per Tender
9 documents required · 9 mandatory
₹500
GE GOLCONDA
₹87,000
Yes
18 May 2023
10 Apr 2023
17 May 2023
10 Apr 2023
15 May 2023
24 Apr 2023
Amount
Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil compete all as specified and directed.
Earthwork in excavation by mechanical means ( Hydraulically excavator)/in foundation trenches or drains ( not exceeding 1.5m in width or 10 Sqm on plan ), including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out in all kind of soil and disposal of surplus excavated soil within a lead of 50m as directed,
Earth work in excavation by mechanical means (Hydraulic excavator) means over area (exceeding 30 cm in depth, 1.5m width as well as 10 sqm on plan ) including getting out in all kind of soil and disposal of excavated earth lead upto 50m and lift upto 1.5m as directed.
Earth work in excavation of by mechanical means (Hydraulic excavator) means over area (exceeding 30 cm in depth, 1.5m width as well as 10 sqm on plan ) including getting out in ordinary rock and disposal of excavated materials lead upto 50m and lift upto 1.5m as directed.
M&L for PCC type D2 1:4:8 (using 40mm graded stone Aggr) in foundations, filling and mass concrete compete all as specified and directed.
Spreading & Levelling and well ramming including watering as required in layers n.exc 25 cm thick complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point in soils complete all as specified and directed.
Removing excavated material exc. 250m but not exc 500m and depositing where directed at a level n exc. 1.5m above the starting point in soils complete all as specified and directed.
M & L Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed.
M & L Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.
M & L Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.
M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.
M&L for Hard core of guage n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.
M & L for 75mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base of floor complete all as specified and as directed.
M& L Virified Ceramic tiles Dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.0 Sqm, in floors etc. set and jointed inneat cement slurry and pointed in white or coloured cement to match over and including 15mm screed bed in CM 1:4 complete all as specified and as directed.
M & L glazed ceramic tiles in vertical surface of size 450x350x7mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match complete over and including 10mm thick plaster/ backing coat in CM 1:3 complete all as specified and as directed.
M & L for 75 mm thick Cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate ) as in plinth protection finished even aned smooth without usisng extra cement complete all as specified and directed.
M&L for use & waste of rough finished flat Form work to sides of concrete foundations rafts, footing, base of columns, raft and raft beams, sides & soffits of foundation (if any) of foundation and plinth beams and similar work complete all as specified and directed.
M & L for reinforced Cement Concrete Type M-25 (DESIGN MIX) using 20 mm graded granite stone aggregate) in foundations including rafts, footings, raft beam, plinth beams and mass concrete complete all as specified and directed.
M&L for use and waste of form work to sides and soffits of floor or roof beams, lintles, cantlevers, shelves incl supports etc for rough finished surface of concrete complete all as specified and directed.
M & L for reinforced Cement Concrete Type M-25 (DESIGN MIX) (using 20 mm graded granite stone aggregate) in Beams, cantilevers, roof beams, lintels over 1.5 M span complete all as specified and directed.
Use & waste of rough finished Square, rectangular or polygonal Form work to sides of pillars, posts, struts, columns and stanchions complete all as specified and directed.
M & L for reinforced Cement Concrete Type M-25 (DESIGN MIX) (using 20 mm graded granite stone aggregate) in Columns, piers, posts and struts complete all as specified and directed.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished surface complete all as specified and directed.
M&L for formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide rough finished surfaces complete all as specified and directed.
M & L for reinforced Cement Concrete Type M-25 (DESIGN MIX) (using 20 mm graded granite stone aggregate) in slabs supported on walls beams and columns in floors roofs, landings, balconies cannapies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for formwork to chullah hoods chajja troughs and similar items including edges complete all as specified and directed.
M & L for reinforced Cement Concrete Type M-25 (DESIGN MIX) (using 20 mm graded granite stone aggregate) in Chajjas complete all as specified and directed.
M&L TMT bars, 10mm dia & over, cut ot length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with wire complete all as specified and directed.
M&L TMT bars, 6 to 8 mm dia cut ot length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with wire complete all as specified and directed.
M&L MS TMT bars 5mm dia and over upto and incl 10 mm dia, cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia) or securing with clips as in spacers, stirrups and binders compete all as specified and directed.
M & L Pre-cast cement concrete solid block masonry, 1:2:4 Type B1 ( 20mm graded stone aggrigate) exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.
Damp rooof cousrse to horizontal or vertical surfaces including necessary formwork in 40mm thik cement concrete 1:2:4 type B-0 and allying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05cum per sqm complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:4 mixe with WPC on fair faces of brick work or on concrete surfaces finished even and smooth (without using extra cement) (IWPC measured and paid separately) complete all as specified and directed.
Supply only integral water proofing compound
M&L for 10mm thick in CM 1:6 rendering on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 5 mm thick on fair faces of concrete surfaces of ceilings in cement mortar 1:3 and finished even and smooth without using extra cement including three coats of white wash on newly plastered surfaces of ceilling including preparation of surface complete all as specified and directed.
S&F steel rolling shutter 1.25mm thick lath without ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat ofprimer erected in position as indicated complete gear operated type with chain wheel and hand chain complete all as specified and directed
S&F steel windows or ventilators with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed
S&F 3 mm thick sheet glass ordinary quality and glazing with oil puty in square n.exc 0.5 sqm in each pane complete all as specified and directed
M&L 2nd class hard wood plain straight solid chowkats and frames wrought, framed, rounded, chamfered put together with glue pinned joints complete all as specified and directed
S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts of size25x3MM MS flat; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 290-0 complete all as specified and directed
M&L for cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in bed black for hold fasts and coping incl necessary form work weathering slightly rounded or chamfered angles and treating and making good the disturbed portion complete all as specified and directed
M&L 2nd class hard wood plain framed factory made panel shutter 35 mm thick (two or three panels) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces, the size of rail & style as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated complete all as specified and directed
S&F 35 mm thick IInd class hard wood glazed and skelton shutters sizes of members as specified in SSR(Part-I) clause 8.24(a), open rebated and prepared to receive glass or gauge (without sash bars ) edges of framing plain, chamfered or rounded, fitted with cut and miterd beads for securing glass or gauge etc. complete all as specified and directed .
S&F MS Butt hinges medium weight cold rolled of size 100mm complete all as specified and directed
S&F MS barrel tower bolts of 200mm long stove enameled black with bright bolt complete all as specified and directed
S&F MS pressed bow handle, oval type stove enameled black of size 150mm long complete all as specified and directed
S&F mild steel sliding door bolts 300mm long plate stove enameled black with bright bolt not less than 12mm dia with and incl a minimum of 6 bolt and nut four on bolt plates and two on staple plate complete all as specified and directed
S & F 300mm, ordinary Mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed
S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apreture 1.0 mm & fixed with stainless steel wire staples fixed complete all as specified and directed
M&L preparation of new surfaces of wood or wood based material description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed.
M & L for Two coats of synthetic enamel paint to new steel surfaces over 10cm width or girth including preparation of new surfaces and one coat of red oxide primer complete all as specified and directed
M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 " 2004 Alkali & fungal resistance dirt resistance exterior paint of required shade ( Company Depot Tinted ) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over new surfaces complete all as specified and directed
M& L for applying two coats of OBD on walls over a coat of chalk whitening on plastered surfaces preparatory to destempering including preparing new surfaces plastered or unplasted of walls complete all as specified and directed.
M&L 10mm thick plastering in CM 1:4 with using WPC @ 3% by weight of cement, on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (NOTE : - WPC will be measured and paid separately)
M&L for APP based polymeric membrane minimum weighing 3Kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm laid over primed surface including bituminious primer conforming to IS -3384 applied @ 0.3 ltrs/sqm by forced application over finished with one coat of aluminium paint @ 100 ml/Sqm, 10 cm overlap fused uniformly by LPG torch flame,with using WPC @ 3% by weight of cement complete incl taking down existing froof treatment and cement plaster of any description, roughing, preparing the surface by cleaning the surface with wire brushing scrubbinbg down with water to receive new treatment complete all as specified and directed
Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade fixed with grey cement and colouring pigments including 50mm thick sand cushioning complete all as specified and as directed.
M & L for Providing, cement concrete type B0 1:2:4 (using 12.5mm graded grinite stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, coping etc complete all as specified and as directed.
M&L Point wiring for one light point/fan point/bell point controlled by one switch with 1.5 sqmm multistrand copper conductor cable PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 1.50 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable ( green colour) as earth lead in and including PVC rigid conduit with all fittings for concealed type on stone / brick, masonary walls, roof etc including new CI/MS sunken box of required size and including 3 mm thick plastic laminated sheet for housing switches sockets, regulators etc. including cutting/running chases, pinning in and making good the disturbed surfaces to match with the existing specification complete all as specified and directed.
All as per ser item No.61 here in before but for one 5 pin 5/6 Amp Switch socket outlet on independent board.
All as per ser item No.61 here in before but for one 5 pin 5/6 Amps Switch socket outlet on same board.
All as per item No. 61 but for One 5 pin 15/16 Amps switch socket outlet point on independent board with 2.5 sqmm PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 2.5 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable (green colour) as earth lead complete all as specified and directed.
Supply and fix switch piano flush type single pole one way 5 Amps complete all as specified and directed at site.
Supply and fix Ceiling rose surface bakelite three 65x50 mm, terminals 240 volts complete all as specified and directed.
S&F Wall mounted indoor decorative 20W LED 6000K (4 ft.), extruded aluminium batten in anodised finish with opal diffuser, IP20 heat sink provided for efficient heat dissipation and integrated electronic driver, lamp color white complete set including necessary connection with twin twisted unsheathed PVC copper cable of suitable size complete all as specified and directed.
Supply and fixing LED street light fitting 35/36 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
S&F Ceiling fans complete with blades, down rods, electronic regulator and accessories, 230Volts, 120mm sweep, Minimum Air delivery 230 CFM with service value 6.00 BEE, Five Star rated with brushless direct current motor BLDC Complete all as specified and as directed.
S&F Sheet metal enclosure MCB distribution board including 200 Amps bus-bar single pole and neutral (SPN) 240V, 8 Ways, double door complete all as specified and directed.
S&F Sheet metal enclosure MCB distribution board including 200 Amps bus-bar Triple pole and neutral (TPN) 415V, 4 Ways, double door complete all as specified and directed.
S&F Sheet metal enclosure Vertical distribution board for incmoing MCCB bus bar suitable for 125Amp incommer MCCB TPN 415V 6 Ways, double door complete all as specified and directed.
Supply and fixing for 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of SP and current carrying capacity 6-32 AMP, in the MCB DB including connection, testing and commissioning complete all as specified and directed.
Supply and fixing for 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 32 AMP, in the MCB DB including connection, testing and commissioning complete all as specified and directed.
Supply and fixing for 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of FP/TPN and current carrying capacity 40 -100 AMP, in the MCB DB including connection, testing and commissioning complete all as specified and directed.
Supply and fixing for MCCB 415V, 16 KA Fixed type, TP and current carrying capacity 25-00 AMP including connection, testing and commissioning complete all as specified and directed.
Supply, Laying, testing & commissioning XLPE insulated, PVC sheathed heavy duty LT 1100 Volts grade armoured UG cable 3.5 Core 95 Sqmm with stranded aluminium conductor in trenches/ fixed to walls/ poles etc complete all as specified and directed.
Supply, Laying, testing & commissioning XLPE insulated, PVC sheathed heavy duty LT 1100 Volts grade armoured UG cable 3.5 Core 50 Sqmm with stranded aluminium conductor in trenches/ fixed to walls/ poles etc complete all as specified and directed.
Supply, Laying, testing & commissioning XLPE insulated, PVC sheathed heavy duty LT 1100 Volts grade armoured UG cable 4 Core 16 Sqmm with stranded aluminium conductor in trenches/ fixed to walls/ poles etc complete all as specified and directed.
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep for foundation, laying of poles, cables in trenches and getting out in hard/dense soil complete all as directed and specified.
Supply and spread approved dry river sand for cushioning of cable including watering and consolidation, laid in trenches complete all as specified and directed. Note:- Punned thickness shall be measured for payment purpose
M&L brick protection with common burnt bricks sub class ‘B’ of size 230 x 113 x 75mm for cable protection complete all as specified and directed.
Supply & Laying 80 mm bore GI tubing, light grade, with all fittings of following sizes for cable protection at road crossing / on poles and tubing sealed at both ends after laying the cables complete all as specified and directed.
Supply & Laying 50 mm bore GI tubing, light grade, with all fittings of following sizes for cable protection at road crossing / on poles and tubing sealed at both ends after laying the cables complete all as specified and directed.
M&L for Earthing complete with galvanized steel with plate electrode 60 cm x 60 cm x 6.3mm thick buried directly in ground (earth kit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized steel strip 25x4mm by means of bolts, nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of SSR part-I connected to earth test point including necessary earth work and excavation, PCC 1:3:6 type C1 using 20mm graded stone aggregate for earth chamber with RCC cover 50mm thick 1:2:4 mix type B1, using 8mm dia TMT bars reinforcement @140mm c/c both ways, watering funnel with GI pipe 15mm dia medium grade and protection pipe GI 40 mm dia light grade all as specified and directed.
M & L for cutting of road, hard standing made of concrete or premix carpet, WBM, soiling and morrum filling including excavation for laying of cable/pipe all as directed and making good the road/hard standing by using all old/new materials and with PCC (1:2:4) etc, required to match with the existing surface complete all as specified and directed.
Earthing complete with galvanized mild steel earth plate electrode size 600x600x6mm thick buried directly in ground earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 1.5 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 part-I, connected to test point including removing existing earthing complete all as specified and testing on completion.
Amutha Constructions
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .