Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.9 LAccepted-AOC PO HATIALI SIDING CHABUA DIST DIBRUGARH ASSAM 786184 | CHABUA | DIBRUGARH | ASSAM | 786184 | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹36.4 L+₹45,863.50 (1.28%)Rejected-Finance | L2 | Rejected-Finance Rejected being L2 | |
| 3 | L3₹36.5 L+₹52,442.50 (1.46%)Rejected-Finance AT ROAD HATIALI PO CHABUA DIST DIBRUGARH ASSAM 786184 | CHABUA | DIBRUGARH | ASSAM | 786184 | L3 | Rejected-Finance Rejected being L3 | |
| 4 | L4₹37.0 L+₹1.1 L (3.05%)Rejected-Finance AT ROAD MES TINALI PO CHABUA DISTT DIBRUGARH ASSAM 84 | CHABUA | DIBRUGARH | ASSAM | 786102 | L4 | Rejected-Finance Rejected being L4 | |
| 5 | L5₹37.2 L+₹1.3 L (3.51%)Rejected-Finance MES TINALI PO CHABUA DISTT DIBRUGARH ASSAM 84 | CHABUA | DIBRUGARH | ASSAM | L5 | Rejected-Finance Rejected being L5 |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
27 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Chabua
GE (AF) CHABUA, POST-CHABUA AIR FIELD, DIST-DIBRUGARH, ASSAM-786102
REPAIR/ REPLACEMENT/ CLEANING OF SEWAGE LINE, SEPTIC TANKS, MANHOLES, WASTE PIPE, GULLY TRAPS AND CLEANING OF SERVICE TANKS AT AF STATION UNDER GE(AF) CHABUA
2023_MES_593666_1
461/E8
Open Tender
Civil Works
Item Rate
270 days
GE (AF) Chabua
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE (AF) CHABUA
₹70,000
Yes
24 Jun 2023
6 May 2023
3 Jun 2023
6 May 2023
27 May 2023
20 May 2023
6 May 2023 - 13 May 2023
Amount
Cleaning of old septic tank including internal pipe connections etc by removing accumulated sludge, silt and brick bats and waste materials including sludge water and removing to a distance n.exc 50 mtr deposited the same in excavated pit, of appropriate size and covering the pit with excavated earth including disinfecting the covered pit by sprinkling bleaching powder @ 250 gm (approx) in each pit including excavation of earth pit complete all as specified and as directed. Note:- Excavation and covering the pit with earth and spreading of bleaching powder shall deem to be included in the unit rate.
Taking out sludge from bottom level of sump either by manually or mechanically cleaning the entire depth and washing down with clean water and removing to a distance exe 50m and n exe 100m and buried under earth pits duly covering and taking all precaution so that there is no health hazard occurs and all as directed. Note:- Excavation of pit and covering the pit with earth shall deem to be included in the unit rate.
Cleaning of sewage line including manhole with bamboo splits or any other suitable device by taking out blocked accumulated sludge and all foreign material complete from man holes and removing the same to a distance not exc 50 m depositing sludge in excavated pits covering the pit with excavated earth and disinfection the covered pit by sprinkling bleaching powder @ 250 gm (approx) in each pit and excavation of pit complete as required including testing for easy flow of effluent by passing water for 100 mm bore SWG drain pipe, complete all as specified and as directed. Note:- Excavation and covering the pit with earth and spreading of bleaching powder shall deem to be included in the unit rate.
All as per item No 3 here-in-before but for 150 mm SGSW drain pipe complete all specified and as directed.
All as per item No 3 here-in-before but for 200 mm SGSW drain pipe complete all as specified and as directed.
All as per item No 3 here-in-before but for 300 mm SGSW drain pipe complete all as specified and as directed.
Cleaning of blocked WC, floor trap, Nahani trap, gully trap etc. by means of hand pump, removing all sludge, brick bats, foreign particles etc. and finally cleaned the WC, floor trap, Nahani trap, gully trap with cleaned water complete all as specified and as directed.
M&L for dewatering of septic tank/soak well by using dewatering pumps sets of 7.5 HP capacity having dia of suction & delivery pipe as 4" & 5" respectively complete all as directed.
Cleaning and removing all side and scales and dirt, etc from PVC tanks having capacity 500 ltrs at different locations and heights and wash down internal surface thoroughly with bleaching powder and fresh water including removal of tank cover, float valve carefully and refixing the same in position complete all as specified and as directed.
Cleaning and removing all side and scales and dirt, etc from PVC tanks having capacity 1000 ltrs at different locations and heights and wash down internal surface thoroughly with bleaching powder and fresh water including removal of tank cover, float valve carefully and refixing the same in position complete all as specified and as directed.
Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth and getting out in soft/loose soil as in foundation of manholes and SGWG pipe line all as required and directed.
Excavation in trenches not exc 1.5 m wide but depth exc 1.5 m and not exc 3.00m and getting out in soft/loose soil complete all as specified and as directed.
M&L for PCC (1:4:8) type D2, using 40 mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and directed.
Returning filling in including spreading, levelling, watering and well ramming in layer not exc 25 cm in soft/loose soil complete all as specified and as directed.
Removing excavated materials to a distance not exceeding 50 m and depositing at a level not exceeding 1.5 m from starting point.
M&L for salt glazed stone ware drain pipes grade 'A; 100 mm bore laid in trenches and jointed in CM (1:1) including demolition and breaking up old drain pipes complete all as specified and directed.
M&L for salt glazed stone ware drain pipes grade 'A; 150 mm bore laid in trenches and jointed in CM (1:1) including demolition and breaking up old drain pipes complete all as specified and directed.
M&L for salt glazed stone ware drain pipes grade 'A; 200 mm bore laid in trenches and jointed in CM (1:1) including demolition and breaking up old drain pipes complete all as specified and directed.
M&L for RCC pipes 300 mm bore, class NP-2, laid and jointed with collars in CM (1:1) including demolition and breaking up old drain pipes complete all as specified and directed.
M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in concrete bed to SGSW drain pipes 100 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested along with demolition of existing concrete bed complete all as specified and directed.
M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in concrete bed to SGSW drain pipes 150 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested along with demolition of existing concrete bed complete all as specified and directed.
M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in concrete bed to SGSW drain pipes 200 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested along with demolition of existing concrete bed complete all as specified and directed.
M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in concrete bed to RCC drain pipes 300 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested along with demolition of existing concrete bed complete all as specified and directed.
Cutting into existing manholes for connecting new drain, making good to pipe 100 mm bore and rendering cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) smooth finished, and reforming benching as required all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position no otherwise specifically provided for as in cover slabs (for man holes, septic tank, soak well etc) complete all specified and as directed.
Separating, scraping and cleaning of reinforcement (Demolition of concrete measured separately) complete all as specified and as directed.
M&L for precast RCC (1:2:4) nominal mix, type B1, using 20 mm graded stone aggregate as in landing, cover slabs (for man holes, septic tank, soak well etc) chullah hoods, chajjas water troughs, manholes, shelves and similar article set in CM (1:4), complete all as specified and as directed. Note:- Reinforcement shall be measured and paid separately.
S&F for Mild steel TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed) not less than 0.9mm dia complete all as specified and as directed.
Taking down cement plaster on brick walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc to receive new plaster complete all as specified and as directed.
Demolition brick work built in cement mortar of any description complete all as specified and as directed.
M&L for brick work with sub-class 'B' bricks straight or curved on plan 6 mtr mean radius built in cement mortar (1:6) complete all as specified and as directed.
M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius in half brick thick wall built in CM 1:4 complete all as specified and as directed.
M&L for rendering 15 mm thick in cement mortar (1:4) in brick walls finished even and fair complete all as specified and as directed.
M&L for cement concrete (1:2:4 ) type B-1 using 20 mm graded crushed stone aggregate as in coping/benching complete all as specified and directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for cement concrete, complete all as specified and as directed.
M&L for rendering 15mm thick in CM (1:4) on fair faces of brick or concrete surfaces (in sunken portion) mixing WPC @ 3% by weight of cement and finished even & smooth without using extra cement complete all as specified and as directed. Note:- WPC shall be measured and paid separately.
M&L for applying evenly a tack coat of blown bitumen 85/25 @ 1.20 Kg/Sqm including cleaning of surfaces, complete all as specified and as directed.
S&F polythene film, black 50 micron laid in floors and sides of walls, complete all as specified and as directed.
M&L for PCC (1:5:10) type E2 (using 40mm graded aggregate) as in filling and mass concrete in sunken portion, complete all as specified and as directed.
Fixing only Wash down water closet (Pedestal Pattern) complete all as specified and as directed. Note:- Water closet will be issued under schedule 'B' as free for fixing.
Fixing only Water closet (Squatt pattern) complete all as specified and as directed. Note:- Water closet will be issued under schedule 'B' as free for fixing.
S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white (including two Nos fixing bolts including PVC seat cover but excluding flushing cistern and flush pipe) complete including making good to floor with and including fixing of P or S trap, complete all as specified and as directed.
S&F in repairs water closet (Squatt Pattern) white complete including provision of cement concrete bedding Orissa pattern size 580 x 440mm with integral foot rests (excluding flush pipe and flushing cisterns) including connection to trap and flushing pipe anti syphonage pipe etc complete and making good to floor complete all as specified and directed.
S&F in repairs PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
S&F in repairs PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, fixed to walls with pipe clips spacing at 1.50 metre c/c including taking down old PVC pipes complete all as specified and directed.
S&F in repairs PVC (SWR) bend any radius, 110 mm dia with access door with solvent cement joint complete all as specified and as directed.
S&F in repairs PVC (SWR) junction single "T" equal with access door 110 mm dia with solvent cement joint complete all as specified and directed.
S&F in repairs PVC (SWR) branch piece, single (single Y) equal or unequal 110 mm dia with solvent cement joint complete all as specified and directed.
S&F in repairs for PVC (SWR) pipe 75 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with solvent cement joint fixed to walls with pipe clips spacing at 1.50 metre c/c including taking down old PVC pipes complete all as specified and directed.
S&F in repairs PVC (SWR) bend any radius, 75 mm dia with solvent cement joint complete all as specified and as directed.
S&F in repairs PVC (SWR) junction single "T" equal with access door 75 mm dia with solvent cement joint complete all as specified and directed.
S&F in repairs PVC (SWR) multi floor trap 75 mm bore outlet with grating and jointing with solvent cement including demolition of concrete if required and making good to surface using PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) or CM (1:4) and tiling as required complete all as specified and as directed.
S&F in repairs PVC (SWR) vent cowl of 110 mm dia complete all as specified and as directed.
S&F in repairs low density polyethylene (LDPE) pipe of pressure rating 6 Kg/Sqcm, 50mm bore including bend and tee, complete all as specified and as directed.
Demolition of cement concrete in ground floors and pavings n. exc. 15 cm thick (below or above ground level) complete all as specified and as directed.
M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection /path/hard standing complete all as specified and directed.
M&L for PCC (1:2:4) type B1 using 20 mm graded crushed stone aggregate as in surface channel and drains complete all as specified and as directed.
M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitered/stopped ends etc complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as directed.
M&L for 40 mm thick PCC (1:2:4) type B1 using 12.50 mm graded aggregate as in sub base of floor to receive floor finishes complete all as specified and as directed.
M&L for non skid ceramic coloured tiles (400 x 400)mm and 8mm thick (square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm in floor etc and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tile including screed bed of mortar 15 mm thick in CM (1:6) complete all as specified and directed.
M&L for glazed ceramic coloured tiles (any shade) of size 350x250x7mm/450 x 300 x 7mm thick for work on vertical surface such as skirting, dado, set & jointed neat in cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM (1:4) as backing coat cement mortar bedding complete all as specified and as directed.
Supply and fixing in repair 10 litre capacity PVC low level valve less syphonic action type flushing cistern, white, with inlet, ball valve, float and handle including brackets, complete all as specified and as directed.
Supply and fixing in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed.
S&F in repairs OHT cover black colour and binding with using GI wire 2 to 3 mm thick properly with Tank complete all as specified and as directed.
S&F in repairs 15 mm PVC float valve high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe, complete all as specified and as directed.
S&F in repair 20 mm PVC float valve high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe, complete all as specified and as directed.
Schedule of Credit
M/s Parma Construction
D.D Construction
M/S R G Construction
M/S DURGA CONSTRUCTION & CO
M/S D P BERLIA
M/s United Builders
M/S MAHATO ENTERPRISE
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .