REPAIR TO CHAJJA, FACIA, PLASTER JOINERY, CUPBOARDS, WALL PANELLING, FLOOR TILING AND OTHER ALLIED WORK OF OTM AND MD ACCN IN ZONE VI AREA UNDER AGE B/R-IV OF GE (SOUTH) MEERUT CANTT

Amount

Taking down chowkats or frames with shutters (without taking of shutters from the frames) exceeding 1.50 Sqm and not exc 4.00 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed

Material and labour for factory made pressed steel frames of size 125 x 60 mm for doors with one or more rebates made out of 1.25mm thick MS sheet including necessary fixing lugs, hinges, lock strick plate etc complete all as specified and directed.

Material and labour for factory made pressed steel frames of section 105 x 60 mm for doors with one or more rebates made out of 1.25mm thick MS sheet including necessary fixing lugs, hinges, lock strick plate etc complete all as specified.

Supply & fixing 30mm thick flush shutter solid core construction with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fix mild steel work as in door chowkats or frames of angle or other section etc complete conforming to Fe-410-0 or 310-0 complete all as specified and directed.

Material and labour for gauzed shutter made of angle iron 35x35x5mm, 25x25x5mm and 1.5 mm thick as shown on drawing, the frame for shutter shall be of pressed steel and 10 mm square bars grill complete with fly proof wire mesh having 0.63mm nominal dia wire and 1.4 mm average width of aperture including two coats of synthetic enamel paint over a coat of red oxide and including taking down old doors with any type with iron items complete all as specified and directed.

Supply and fix Aluminium, anodized barrel tower bolts of extruded section and fixed, 200 mm long, dia of bolt not less than 12mm, ISI marked, complete all as specified.

Supply and fix aluminium anodized handle of size 200mm, ISI marked, complete all as specified and directed.

Supply and fix 250 mm long aluminium anodised, sliding door bolts, with haps staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts, complete all as specified and directed.

Material and labour preparation of new or previously untreated steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed.

Material and labour for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed.

Supply and fix for anodised aluminium doors shutters without sash bars, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, aluminum snap beading screws suitable anodised fittings such as, hinges, handles, including anodised aluminum frame with one or more rebates including supply and fix 5 mm thick black glass and aluminium grill fixed to frame in half portion complete all as specified and directed.

Supply and fix for anodised aluminium window side hunge type with sash bars, aluminium section weighing not less than 0.55Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws suitable anodised fittings such as, hinges, handles including anodised aluminium frame with one or more retabes including supply and fix 5 mm thick black glass and complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair cast iron body door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

Material and labour for double action floor spring hydraulically regulated made up of minimum 1.25mm aluminium sheet foundation box main body with stainless steel cove governing pivot made or brass, other part made of mild steel heavy duty fixed in repair complete all as specified and directed.

Supply and fix Steel window box type using 'P' section comprising double frame for gauged and glazed skeleton shutter jointly with flat iron 40x3mm all around complete including hinges, handle tower bolts stops, lugs etc. Note (i) For the purpose of measurement and payment double shutter with frame shall be considered as one unit (ii) Unit rate quoted against this item shall also include the iron mangries shown on drgs (iii) guard bars, glazing and wire mesh shall be measured and paid for separately.

Supply and fix for factory made steel ventilators fixed type with glazing bars complete all as specified and directed

Material and labour for solid PVC door frame of size 50mmx47mm made out of 5mm PVC plain coloured sheet reinforced with MS square tube suitable for solid PVC door suppling & fixing in opening, complete all as specified and directed.

Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for to rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed to getter with solvent cement, in the frame at site as per specification and drawing complete all as specified and directed.

Supply and fix stainless steel butt hinges 100mm in size complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or discription) from metal/wooden frames fixed with pin, beading or oil putty complete all as specified and directed.

Supply and fix 3mm thick sheet glass ordinary quality any size and in any type in any of fram and glazing with oil putty (or beading) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

Supply and fix sheet 3mm thick, pin headed type and glazing with oil putty in squares not exceeding 0.5 sq.m in each pane, complete all as specified and directed.

Material and labour for repair to anodised aluminium door shutters and make it serviceable condition including necessary joining cleats, glazing clips, ruber neoprene packing, snap beading, screws, complete all as specified and directed.

Supply and fix insulated PVC wall lining consisting of PVC insulated panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing, thickness of insulated PVC wall lining 12mm including dismantling of boarding of any thickness or description all as specified and directed by Engr-in-Charge.

Material and labour for non skid joint less ceramic floor tiles (premium quality) of size 600X600X8 - 10 mm thick as in floors, etc set and jointed in neat cement slurry and pointed in white/colour cement to match including 15mm thick screed bed in cement mortar (1:6), including dismantling of old tiles complete all as specified and directed.

Material and labour for non skid glazed ceramic coloured tiles (premium quality) of size 400X400X7-8mm thick as in floors, etc set and jointed in neat cement slurry and pointed in white/colour cement to match including 15mm thick screed bed in cement mortar (1:6), including dismantling of old tiles complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles (premium quality) of size 450X300X7-8mm thick as in vertical surfaces, set and jointed in neat cement slurry and pointed in white/ coloured cement to match, laid over and including 10 mm thick backing plaster in cement mortar 1:4 including removing of old tiles complete all as specified and directed.

Demolition of stone slab and tiles of any description or thickness in floor, etc complete all as specified and directed.

Material and labour for 14 to 16mm thick Udaipur Green Stone, polished (table rubbed and polished) as in jambs, window cills, cooking platforms and the like, bedded over and including 10 mm thick screed in in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of stone, including rounding of edges and drilling hole for gas pipe complete all as specified and directed.

Material and labour for machine cut kota stone slab flooring 15-18mm thick laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granite finish complete over and including 15mm thick cement screed bed in CM 1:4 complete all as specified and directed.

Demolition of plain cement concrete in ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified and directed.

Material and labour for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade wih grey cement & pigment laid over and including 25mm thick sand cushioning bed complete all as specified and directed

Material and labour for PCC 1:4:8 type D2, 75mm thick (using 40mm graded stone aggregate) as in as in sub base of flooring complete all as specified and directed.

Material and labour for PCC 1:3:6 type C-1, 75mm thick (using 20mm graded stone aggregate) as in plinth protection including finished sufraces even and smooth without using extra cement complete all as specified and directed.

Material and labour for chequered cement concrete tiles 20cmx20cmx18-20 mm thick set and jointed in cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15 mm thick scred bed in cement mortar 1:6 complete all as specified and directed

Material and labour for applying one coat of synthetic enamel paint over old painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth incl preparatioin of old painted surfaces complete all as specified and directed.

Material and labour for applying one coat of synthetic enamel paint over old painted steel & iron surfaces surfaces of any description not otherwise described over 10 cm width or girth incl preparatioin of old painted surfaces complete all as specified and directed.

Demotion of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed.

Material and labour for brick work with fly ash bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and directed.

Taking down cement plaster of any description from brick wall or concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

Material and labour for 15mm thick rendering in cement mortar 1:4 on fair faces of brick or concrete surfaces finished even and smooth complete all as specified and directed.

Material and labour 10mm thick rendering in CM 1:3 in patches on concrete surfaces as in ceiling finished even and smooth complete all as specified and directed.

Material and Labour for mild steel framed work as in frame for sun shade at any height up to double storey incl all necessary scaffolding and cement work required for fixing of frame to wall complete all as specified and directed.

Material and labour for 2mm thick fiber glass reinforced transulant plain sheet fixed in repair, fixed with coach screw and washer and nut bolts as in sun shade chajjas roof, wall etc complete all as specified and directed.

Material and labour for three coats of white wash on newly plastered or unplastered surfaces of ceiling/chajja including preparation of surface complete all as specified and directed.

Supply and fix floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, with overall length of cover plate as 150mm long including rubber shoes fixed to wooden and aluminium frame (door/shutter) complete all as specified and directed.

Supply and fix in repair 25mm dia mild steel curtain rod Vista pattern fancy type, as approved by GE, including brackets and fancy type end knobs, rings etc complete all as specified and directed.

Material and labour for 18/19 mm thick particle board, grade 2 quality interior grade, commercial type fixed with nails to timber frame work as in cupboard, shelves kitchen cuboard etc including taking down existing material complete all as specified and directed.

Material and labour for preparation of old white wash surface and applying one coat of white wash on ceiling surfaces complete all as specified and directed.

Material and Labour for preparation of old painted surfaces and applying two coat of cement base paint on wall of any colour complete all as specified and directed.

Material and labour for preparation of existing wall surface and finishing the surfaces of wall applying two coat of oil bound distemper, any colour , complete all as specified and directed.

Material and labour for preparation of old distemper oil emulsion surfaces and applying one coat of oil bound distemper on wall surfaces complete all as specified and directed.

Supply and fixing mild steel framed work such as grills, grating etc with end of bars shouldered or riveted forged into spikes, framed guard bars, railings and similar work complete conforming to Fe-410 Gde E-310 complete all as specified and directed.

Supply and fix galvanised mild steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.14mm and including fixed with tinned tacks, wooden beading, metal frame for securing wire gauge with wire staples complete all as specified and directed.

Supply and fix as in repair galvanised mild steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.14mm and including fixed with tinned tacks, wooden beading, metal frame for securing wire gauge with wire staples complete all as specified and directed.

Material and labour preparation of new wall plastered surfaces and applying two coats of cement base paint, over a coat of cement primer complete all as specified and directed

Material and labour for reparing of old wooden doors by repairing projecting/friction, type hinges, handle, bolts etc as required and providing nrew as required complete all as specaified and directed

Supply & fix in repair glass corner shelf assembly fancy type made of 6 to 7 mm thick sheet glass of size 250x 250mm fixed with CP brackets complete all as specified and directed.

Material and labour for 40mm thick PCC(1:2:4) Type B-1(using 20mm graded crushed stone aggregate) as in flooring finishing cement cocnrete surfaces even & smooth on without using extra cement all as specified and directed.

Supply and fix in repair brass mortice lock including necessary arrangements for removal and fixng complete all as specified and directed.

Material and labour for PCC 1:3:6 type C-0 (using 12.5mm graded agg) for hold fast pressedsteel frame etc complete all as specified and directed.

Supply and fix butt hinges medium weight, cold rolled mild steel & fixed with screws or with welding to existing MS frame 100mm size ISI Marked complete all as specified and directed.

B.K.construction

SHAKTI CONSTRUCTION CO

M/S AGARWAL CONSTRUCTION CO.

m/s gupta construction