RE-WIRING AT CERTAIN BUILDINGS IN TECHNICAL AREA AT AFS JAISALMER

Amount

Taking down carefully aluminium point wiring on wooden battens/through conduit (light fan, socket or power) complete with fittings such as switches, wooden batten, ceiling roses, pendants, regulators, box type tube light fittings, removing the materials from site except fittings etc which shall be reused in the work and making good the disturbed surfaces of walls/ceiling/ floors etc complete all as specified and as directed by Engineer-in-Charge

M&L for concealed point wiring for controlled by one switch with PVC insulated but unsheathed single core FRLSH multistranded copper conductor cable IS-694 marked of size 1.5 Sqmm (nominal area) in and including non metallic rigid PVC conduit 20 mm dia by cutting chases in walls by cutter and making good the surface in CM 1:3 and to the original specification and PVC conduit on ceiling for steel structure/surface conduit with clamps, gutties etc for RCC ceiling with including one run of PVC insulated FRLSH copper conductor cable of 1.5 Sqmm with green insulation as earth wire and connected to earth dolly complete all as specified and directed. One light point controlled by one, one way switch

-Ditto- all item as per Ser No 2.00 above but One fan/exhaust fan point controlled by one, one way switch

-Ditto- all item as per Ser No 2.00 above but One socket outlet 3 Pin, 6 Amp on independent board

-Ditto- all item as per Ser No 2.00 above but One socket outlet 3 Pin, 6 Amp on same board.

-Ditto- all item as per Ser No 2.00 above but One bell point controlled by one bell push

-Ditto- all item as per Ser No 2.00 above but One light point controlled by one 2-way switch

M&L for point wiring for controlled by one switch with PVC unsheathed single core multistranded copper conductor cable of size 4 Sqmm (nominal area) in and including PVC conduit 20 mm dia by cutting chases in walls by cutter and making good the surface in CM 1:3 and to the original specification and PVC conduit on ceiling for steel structure/surface conduit with clamps, gutties etc for RCC ceiling including one run of PVC insulated FRLSH copper conductor cable of 4 Sqmm with green insulation as earth dolly for 6 pin, 16 Amp socket outlet on Independent board.

S&F switch piano flush type single pole one way 5 Amp (ISI Marked)

S&F switch piano flush type single pole one way 15 Amp (ISI Marked)

Supply & fix in repair single pole and neutral enclosure 2 module in sheet steel with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 10 KA complete all as specified and directed.

S&F Bell push flush type single pole one way 5 Amp (ISI Marked)

S&F socket out let 2 in 1, 3 pin 5 Amp flush type (ISI Marked)

S&F socket out let 2 in 1, 3 pin 15 Amp flush type (ISI Marked )

S&F switch piano flush type single pole two way 5 Amp.

M&L for bell multi music type, AC 230 Volts, single pole (ISI Marked)

Supply and fix Electronic fan regulator 230 volts, step type,socket type ,hum free 120 watt ISI Marked,including taking down unserviceable.

M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body (ISI Marked)

Taking down of old existing unserviceable submain wiring of any rating.

M&L for submain wiring with 2 single core PVC insulated unsheathed multi stranded copper conductor FRLSH wire 4.00 Sq mm 1100 volts grade including one 4 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC casing caping / conduit incl cutting, chases in stone wall and match with the existing surface complete all as specified and directed. Note : Two run of 4.00 Sqmm cable and one run of 4 Sqmm cable as earth continuity conductor and 25 mm PVC conduit shall be measured & paid as one unit.

M&L for submain wiring with 2 single core PVC insulated unsheathed multi stranded copper conductor FRLSH wire 6.00 Sq mm 1100 volts grade including and 06.00 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC conduit incl cutting, chases in stone wall and match with the existing surface complete all as specified and directed. Note : Two run of 06.0 Sqmm cable and one run of 6.0 Sqmm cable as earth continuity conductor shall be measured & paid as one unit.

M&L for submain wiring with 2 single core PVC insulated unsheathed multi stranded copper conductor FRLSH wire 10.00Sq mm 1100 volts grade including one 10.00Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC casing incl cutting, chases in stone wall and match with the existing surface complete all as specified and directed. Note : Two run of 10.00 Sqmm cable and one run of 10.00 Sqmm cable as earth continuity conductor and 25 mm PVC conduit shall be measured & paid as one unit.

M&L for submain wiring with 4 single core PVC insulated unsheathed multi stranded copper conductor FRLSH wire 6.00 Sq mm 1100 volts grade including and 06.00 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC conduit incl cutting, chases in stone wall and match with the existing surface complete all as specified and directed. Note : Four run of 06.0 Sqmm cable and one run of 6.0 Sqmm cable as earth continuity conductor shall be measured & paid as one unit.

Supply and fixing Surface and wall mounted LED tube light fittings of cap 10W , Two feet Basic all purpose surface and wall mounted LED batten with polycarbonate housing including taking down with all as specified and directed.

Supply and fixing Surface and wall mounted LED tube light fittings of cap 20W , four feet Basic all purpose surface and wall mounted LED batten with polycarbonate housing including taking down with all as specified and directed.

Removing of surface and wall mounted LED tube light fittings of cap up to 20W , and refixing the same from ceiling rose all as specified and directed.

Taking down old unserviceable fitting and Supply and fixing LED Panel 36 watt with 2ft x 2 ft slim panel 595X595mm with super bright surface mounting LED Slim ceiling light with white powder coated extruded aluminium housing and highly efficient light smoothing optics to deliver superior illumination including LED driver and fixing in recess ceiling suitable size of aluminium strip size as required for fixing of LED fitting complete with all accessories prewired fixed on ceiling and connecting up complete with 3 core flexible cable of size 23/0.0076 including taking down old unserviceable fittings complete all as specified and directed.

Taking down old unserviceable fitting and Supply and fixing Recess mounting LED 40 watt 2' x 2' LED Slim Panel - 595x595 mm white powder coated aluminium extruded housing with LEDs including LED driver and fixing in recess ceiling suitable size of aluminium strip size as required for fixing of LED fitting complete with all accessories prewired fixed on ceiling and connecting up complete with 3 core flexible cable of size 23 / 0.0076 complete all as specified and directed.

Supply & fix Prewired Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 amp rated copper bus bar 240 Volts 4 way single pole and neutral complete all as directed by Engineer-in-Charge.

Supply & fix Prewired Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amp rated bus bar 240 Volts 8 way (2 + 6 way) single pole and neutral including taking down complete all as directed by Engineer-in-Charge.

Supply & fix Prewired Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amp rated copper bus bar 240 Volts 12 way (2 + 10 way) single pole and neutral complete all as directed by Engineer-in-Charge.

Supply & fix Prewired Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 amp rated copper bus bar 240 Volts 4 way Triple pole and neutral complete all as directed by Engineer-in-Charge.

Supply & fix sheet metal enclosure for VTPN DBs, 4 Ways, Double door (IP-43), built in busbars complete suitable for 415 volts, AC 50 Hz supply, suitable for incoming MCCB and outgoing MCBs and fixed in recess in brick masonary wall complete all as specified and directed by the Engr in charge.

S&F inlcuding taking down unserviceable MCB’s of any type. S & F MCB, 6 to 32 Amp, SP, 240 Volt. complete all as specified and directed.

-Ditto- all item as per Ser No 29.00 above but S&F MCB, 32 Amp, SPN, 240 Volt complete all as specified and directed.

-Ditto- all item as per Ser No 29.00 above but S&F MCB 63 Amp, TPN 240 volts 10 KA, 'C' curve complete all as specified and directed.

-Ditto- all item as per Ser No 29.00 above but S&F MCB 100 Amp, TPN 240 volts 10 KA, 'C' curve complete all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed. (i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I. (ii) Item includes the cost of 7.50m GI pipe for protection of earth wire/strip Any variation in length shall be adjusted through deviation order. (iii) Item includes cost of 7.50m earth lead wire/strip. Any variation in length shall be adjusted through deviation order. (iv) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 Sqmm, 3.5 Core .

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core

Supply and fixing LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.

Supply and fixing of flame proof exhaust fan of size 230mm sweep with louvers and making suitable size hole and making the surface to match with the existing including electrical connections complete all as specified and directed.

Supply and fixing of Flame proof DB SPN 4 way, double door, 240V with MCB SPN 32 Amp -01 No and MCB SP 6-32 Amp - 02 Nos complete all as specified and directed.

Supply and fixing LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.

S&F in MCCBs thermal magnetic including necessery fixing of arrangement complete all as specified and directed, of capacity 100 Amps, 4 Pole, breaking capacity 25KA .

All as per item No 22 above but 160 Amps, 4 Pole, breaking capacity 36 KA .

Taking down carefully ceiling fan 230 volts single phase 50 Hz from the position after dismantling fan blades of any sweeps and carrying out complete servicing with and including cleaning, greasing, replacing flexible 3 core cable of size 1.5 Sqmm with copper conductor from ceiling rose to fan, replacing rubber reel, split pins, check nuts, PVC connector complete with and including painting with 2 coats of synthetic enamelled paint over a coat of red oxide anticorrosive primer after rubbing entire fan body and blades and fixing back the fan in position complete all as specified and directed.

Supply and fixing of ceiling fan rod upto 2.5 feet length all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm sweep complete all as specified and directed.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for foundation etc or for laying of cables, pipes, erection of poles, structs/stays etc not exceeding 10 sqm and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in soft/loose soil complete all as specified.

Removal of excavated soil/ material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.50 metre above the starting point complete all as specified.

Supply and Laying of HDPE DWC pipe dia 40/32mm (outter/inner) with including fitting like couplers, bends, and end caps and etc consists of two layer, The outer layer smooth to facilitate easy cable pulling, Primarily used for underground cable ducting for electrical networks to provide mechanical protection with standards IS:16205 (Part-24) 2017 all as specified and directed by Engr-in-charge.

Supply and laying of HDPE DWC pipe dia 50/38mm (outter/inner) with including fitting like couplers, bends, and end caps and etc consists of two layer, The outer layer smooth to facilitate easy cable pulling, Primarily used for underground cable ducting for electrical networks to provide mechanical protection with standards IS:16205 (Part-24) 2017 all as specified and directed by Engr-in-charge.

JAI ENTERPRISES (BID ID -3507384)

HIMANSHI ENTERPRISES (BID ID -3507542)

M/s Ramesh & Company (BID ID -3507725)