Construction of G2 (03 storeyed) RCC framed Structure library block at SAM Degree College Budgam.

Amount

Site clearance & leveling of the ground including bush cutting etc (platform cutting including disposal of surplus earth as directed by engineer incharge.

Earthwork in excavation by manual means in trenches for foundation , drains, pipes, cables etxc (not exceeding 1.5 mtr in width)and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan ,depth upto 1.5 mtr including disposal of excavated earth upto 1 mtr for cutting edge, disposed earth to be leveled and neatly dressed in all kind of soil

Providing and laying 150mm thick stone soling under raft and flooring hand.

Providing and laying in position cement concrete of M 7.5 specified grade excluding the cost of centering and shuttering all work upto plinth level in 1:4:8 mix (1 Cement :4 coarse sand :8 graded stone agg.40mm Normal Size) using crushed agg. Including all leads, lists and all carriages. Upto site of work complete

Providing and laying of reinforced cement concrete of M20 specified grade excluding the cost of centering and shuttering all work upto floor V-level in 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone agg.20mm normal size) using crushed agg. Including all carriages upto site of work complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level in 1:3:6 mix (1 Cement :3 coarse sand :6 graded stone agg.20mm Normal Size) using crushed agg. Including all leads, lists and all carriages. Upto site of work complete

Sand filling inside rooms in layers including ramming, compacting, watering and carriage complete job.

Brick work with FPS bricks of class designation 75 in super structure above plinth level upto floor 2 level in cement mortar 1:6 mix (1 cement :6 fine sand) including cost of all carriages mechanically / manually complete job

Reinforced cement concrete of M25 grade (1: 10: 2 5) in beams columns loors, roofs, cum landings chajjas Iintels, staircase, etc

Controlled cement concrete of M30 grade (design Mix) in columns

Centering and shuttering incl. strutting, propping etc. and removal of the same include foundation, footing bases of columns etc for mass concrete.

Suspended floors, roofs, columns and landing floor /floor Beams

Reinforcement for RCC work including straightening cutting bending and placing in position and binding all complete for Slab, columns, floor beams Linter roof beams & stair thermo mechanically treated bars

Providing/ laying of wood work in frames of doors, windows, clerestory windows and chowkats (chowkats 3’ x 5’ size) wrought frames and fixed in position in 2nd class Deodar wood.

Providing and fixing ISI marked flush doors, shutters, decorative type frame of hard wood and well matched teak 3 ply veneering on both faces of shutters 35mm thick including ISI marked anodized aluminum butt hinges with necessary

P/F of 35mm thick wire gauze shutters including butt hinges and screws in first class and cost of all fittings complete job.

Providing and fixing 35mm glazed shutter for window & clearstory windows including ISI marked M.S pressed but hings 3.5 mm glazed panes of Ist class kail wood

Providing and fixing of (24’ x 24’ minimium) thickness 10mm vertified floor tiles of approved quality and shade of Somany/Kajaria laid over 12mm thick cement plaster filling with joists by white cement-based water proofing pigment complete job.

P/F Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in color such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1:4 (! cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete.

P/F 1st quality ceramic glazed wall tiles conforming to IS: 13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all color, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Applying 15mm thick cement plaster on the rough side of brick wall in (1:6) cement sand mix.

Applying 12mm thick cement plaster (1:3) mix to ceiling.

Applying 20mm thick cement plaster finished with a floating coat of neat cement in (1:4) cement sand mix – outside plastering

Painting with oil wood preservative of approved brand and manufacture to give an even shade.

Painting with synthetic enamel paint of approve brand and manufacture to give an even shade two or more coats including with ready mixed of approved brand and including priming coat complete in all respects.

Making plinth protection 50mm thick of cement concrete 1:3:6 over 75mm bed of dry brick ballast 40mm ram. Size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete.

Providing and fixing hand rail complete as per drawing in first class deodar wood hand rail out of 150mm x 75mm section fixed to MS flat 32mm x 6mm with French sprit polish complete. FABRIC SPECIFICATION : 450 GSM VELVET, Shade and fabric approved by Engineer in Charge or enduser Fabric Make : Innovative, Response or Nexgen

Providing and fixing MS Square bars and flat for railing support including the cost of welding making in one piece appearance grouting in cement conc. Steps, landing, slab including a coat of promer and two coats of synthetic enamel paint of approved quality and shade.

Steel work welded in built up sections for roof trusses including cutting, welding, hoisting etc including cost of steel primer.

Providing and fixing of MS Grill of required pattern in frames of windows etc with MS flats (12mm x 4mm) etc complete

Provision for iron hold fast for fixing of doors And window frames including fixing to frames with 10mm dia. Bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement: 3 coarsesands:6 graded stone agg. 20mm nominal size)

Providing and fixing of colour coated track deck fixing with polymer coated J or L hooks bolts overlapping of sheets complete (up to a pitch of 60 degree) excluding the cost of purlins rafters and trusses.

Providing and fixing ridges or hips of width 60cm overall width color coated sheet 0.63mm thick fixed with polymer coated Jor L hooks bolts and nuts complete.

Providing and fixing valleys of 90cm width overall in color coated sheet 0.63mm thick fixed with polymer coated Jor L hooks bolts and nuts complete.

Providing and fixing of 18mm thick soffit boarding/ paneling of well seasoned budloo wood including base work of 3”x 3” size of joists

Providing and fixing of 32 x 250mm eaves boarding of first class kail wood.

Providing and applying of 3mm thick POP punning over plaster surfaces to prepare the surface even and smooth. a) On walls

b) On ceiling

Applying paint over wall surfaces/ ceiling of a approved brand and manfacture

Providing and fixing of glass panes 3.5 mm thickness as per specifications with first class deodar beading up to size 40x00mm in wooden frames and painting as per specifications.

Providing and fixing of powder coated Aluminum doors and windows partition with 12mm thick partial board and 5mm thick glass with all accessories.

Providing and fixing of kail wood paneling on walls of multi purpose hall including cost of supporting base work of 8mm ply wood complete job.

Providing and fixing khatamband ceiling Yamberzal type include 1m x 1m mesh frame work 50mm x 50mm budloo wood pattern including the budloo under layer and fitting the meshed frame to the ceiling properly with sprit polish of ceiling complete job.

WATER SUPPLY

Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 0C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge. Concealed work, including cutting chases and making good the walls etc. a. 1620 (20 mm OD) pipe

b. 2025 (25 mm OD) pipe

Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 0C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge. a. 2025 (25 mm OD) pipe

b. 2532 (32 mm OD) pipe

c. 4050 (50 mm OD) pipe

Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 0C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge. a. 4050 (50 mm OD ) pipe

Providing and Fixing of Thermal Insulation for Hot Water Lines made out of Flexible Elastomeric Foam of Closed Cells Structure Having a Thermal Conductivity of 0.038 W/m.K at 200 Deg C water Vapour Permeability of Cu.m 5000 as Required including accessories i.e Adhesives/Tape on all Joints as per the satisfaction of the Engineers Incharge. a. 1620 (20 mm OD) pipe

b. 2025 (25 mm OD) pipe

c. 2532 (32 mm OD) pipe

d. 4050 (50 mm OD) pipe

Providing and fixing unplasticised PVC connection pipe with brass unions: a. 45 cm length

Cutting holes upto 30x30 cm in walls including making good the same with common burnt clay F.P.S.(non modular) bricks

Constructing masonary chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement: 4 coarse sand) with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cenment:5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design With F.P Bricks.

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m

110 mm dia. PVC SWR socketed pipe with rubber ring joints as per IS:13592 Type-B

Supply, Installation of PVC Gully Trap of Size 110 mm

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. a. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing septic tank, of size 4.2 mx 1.50 mx1.55 m approx. height(Height to be fixed as per site requirement i.e. below invert level of last manhole , in B/W, 350/230 mm thick ( minimum) walls .

Providing & fixing full way lever operated forged brass ball valve of brass body with forged brass hard chrome plated steel ball tested to a pressure not less than 16 Kg / sqcm with threaded / flanged joints complete with nuts, bolts, gaskets, washers etc. a. 50 mm Diameter

b. 32 mm Diameter

c. 25 mm Diameter

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing on wall 35 LTRS Electric Geyser with ABS Body.

M/S MOHAMMAD ASHRAF GILKAR ENGINEERS AND CONTRACTORS

ALI MOHAMMAD BHAT

M/S NASEEB BUILDERS