Proposed Construction of Chhatrapati Shahu Maharaj Research, Training and Human Development Institute (SARTHI) Sub centre, Kolhapur (Material Rate)

Round Center Table 450 millimetre: Providing and fixing CENTER TABLE VENEER having size Top 450 dia millimeter, 600 millimeter height; madeup of 18mm thick COMMERTIOL PLYWOOD (ISI-303) made up of as approved design & drawinng and finish with 4.00 mm thick VENEER (IS-1326) primum quality in approved design and grove, plywood finish with BTC lipping internal french polishing, outter edges melamine polish antitermite treatment and as directed by engineer in charge etc completed.

Round Center Table 900 millimetre: Providing and fixing CENTER TABLE VENEER having size Top 900 dia millimeter, 600 millimeter height; madeup of 18mm thick COMMERTIOL PLYWOOD (ISI-303) made up of as approved design & drawinng and finish with 4.00 mm thick VENEER (IS-1326) primum quality in approved design and grove, plywood finish with BTC lipping internal french polishing, outter edges melamine polish antitermite treatment and as directed by engineer in charge etc completed.

4 SEATER DINING TABLE: Providing & fixing 4 Seater DINING TABLE finished with Laminate having size of 1.40*0.90*0.75 m as per detailed drawing with following specification made up of COMMERTIAL I.S 303 Ply 18mm thick and toplayer finished with 1.00mm thick LAMINATE confirming to (ISI 2046), and beech wood for making legs finished with polishing, outer edges and body melamine polishing, antitermite treatment, and directed by engineer in charge etc. complete.

DINNING CHAIRS (WOODEN): Providing & supplying DINING CHAIR having back of 1.20m (ht)*0.48m (W) and seat of 0.45*0.45*0.45m made up of Beach Wood Premium quality in approved design and grove, with 40mm foam density and resin as per required, wood with smooth finishing, PU teak wood polish, and directed by engineer in charge, etc.complete.

S.S.DINING TABLE : Providing & Supplying 8 Seater Dining Table of required size of 2.5*0.9*0.75m as per drawing with following specification madeup of Stainless Steel. Top: Stainless steel flat sheet 1-2 mm thick of 202 SS Grade with SS Surface finish. Legs: Madeup of high quality304 SS Grade stainless steel with leg size made up of 30*50 mm. and directed by ineineerin charge, etc. Complete.

DINING CHAIR : Providing & Supplying Dining Chair having back of 0.45m (ht)*0.40m(w) and Base of0.45*0.45*0.45m made up of primary material metal of subtype Stainless steel. Back made with steel rod of 15 & 20 mm with powder coating finish. Base made up of 3mm perforated metal round, galvanized steel, G90, 22 Gauge with 23% open area, & directed by engingeer etc. Complete.

Library Workstation: Library Workstation @ 900Lx600Dx750HT Providing & Fixing of FREE STANDING TABLE @900Lx600Dx750HT:-TOP to be made of 18mm thick COMMERTIOL PLYWOOD (ISI-303) made up of as approved design & drawinng and finish with 1.00 mm thick Laminated (IS-1326) primum quality, plywood finish with BTC lipping internal french polishing, outter edges melamine polish antitermite treatment etc. complete. All samples must be approved by the Project Architect and work must be done as directed by Engineer -In-Charge.

Study Chair: Providing and fixing Study Chair with Wooden base finished with Veneer at base and back with SS legs base.TEO VNR ( VENEER ) Overall Dimensions- HEIGHT = 800, WIDTH = 500 & DEPTHS = 525, Seat Dimensions - Height = 450, Width = 446 & Depth = 430 as per the sample approved by Architect, etc complete as directed by Engineer In-Charge.

READING HALL CIRCULAR TABLE: Library 4 Seater Round Study TableProviding and Fixing 4 Seater Round Study Table of Size :1200 dia millimetre and 750 millimetre height. Main table tops to be made up of 4.00 mm thick VENEER (IS-1326) premium quality, positioned at 750 millimetre high from ground level. understructure Legs should be made of CRCA pipe with round shape with Powder coated etc. complete. All samples must be approved by the Project Architect and work must be done as directed by Engineer -In-Charge.

STUDY TABLE : Providing and fixing Students Room Study table in "Rectangular" shape of required size 1000x600 having height of 750 mm as shown in drawing made up of 12mm/ 19mm thick plywood/Prelam boards conforming to ISI-303, study table league (50x50) open leg in 1000x600 with out modesty & electrical ( Prelam)., etc. as shown in the drawing and design supplied by the Architect and antitermite treatment to all plywoods and polishing 2 coat to all surface etc. complete as directed by Engineer -In-Charge.

One Seater Sofa: Providing and fixing Frame in Hardwood fully Cushioned in Seat. Stainless Steel Legs at the base. One Seater Sofa - 750 millimetre W x 750 millimetre D x 750 millimetre H with Curve- Seat 550millimetre, as per the sample approved by Architect, etc complete. All samples must be approved by the Project Architect and work must be done as directed by Engineer -In-Charge.

Two Seater Sofa: Providing and fixing Frame in Hardwood fully Cushioned in Seat. Stainless Steel Legs at the base. One Seater Sofa - 1100 millimetre W x 750 millimetre D x 750 millimetre H with Curve- Seat 550millimetre, as per the sample approved by Architect, etc complete. All samples must be approved by the Project Architect and work must be done as directed by Engineer -In-Charge.

Round Center Table 450 millimetre: Providing and fixing CENTER TABLE VENEER having size Top 450 dia millimeter, 600 millimeter height; madeup of 18mm thick COMMERTIOL PLYWOOD (ISI-303) made up of as approved design & drawinng and finish with 4.00 mm thick VENEER (IS-1326) primum quality in approved design and grove, plywood finish with BTC lipping internal french polishing, outter edges melamine polish antitermite treatment and as directed by engineer in charge etc completed.

Round Center Table 900 millimetre: Providing and fixing CENTER TABLE VENEER having size Top 900 dia millimeter, 600 millimeter height; madeup of 18mm thick COMMERTIOL PLYWOOD (ISI-303) made up of as approved design & drawinng and finish with 4.00 mm thick VENEER (IS-1326) primum quality in approved design and grove, plywood finish with BTC lipping internal french polishing, outter edges melamine polish antitermite treatment and as directed by engineer in charge etc completed.

Book Storage: Providing and Fixing Book Shelf of Size 900 x 300 millimetre and 1800 millimetre height. Main table tops to be made up 18mm thick COMMERTIOL PLYWOOD (ISI-303) made up of as approved design & drawinng and finish with 4.00 mm thick VENEER (IS-1326) primum quality, plywood finish with BTC lipping internal french polishing, outter edges melamine polish antitermite treatment & Shutters made up of Glass etc. complete. All samples must be approved by the Project Architect and work must be done as directed by Engineer -In-Charge.

Newspaper / Magazine Stand: Providing and Fixing Library Magazine Stand Of Size 400 millimetre and 1400 millimetre height Positioned At height of 400 millimetre From Floor Level made up of steel As Shown In Drawing etc complete. All samples must be approved by the Project Architect and work must be done as directed by Engineer -In-Charge.

Doctor Room Bed Size of 2060mm x 960mm Adjustable Backrest : Provides flexibility for patient positioning during examinations and procedures.Durable Frame Construction: Built to last with a strong, sturdy structure.Comfortable Padding: Soft, cushioned surface to ensure patient comfort during use.Mattress Included: Comes with a mattress to enhance patient comfort.

MIRROR : Providing and fixing 2.2m x 0.65m size superior type 6mm mirror with 18mm Back Supported ply.

S.S.DINING TABLE 1500X800X750MM: Supply & placing of Spacewood make ( SOS) SS finish Dining Table having dimension 1500 mm L x 800 mm D x 750 mm HT. Complete table shall be made out of SS 304 Grade, in matt finish & Argon welding. TOP SHALL BE MADE OUT OF S.S. 304 with stiffner for support. Understructure shall be made out of SS 304 grade 40 x 40 Square pipes. Table will have provision of footrest. Legs bottom will have Teflon bush.

CUBE multipurpose chair: Supply & placing of CUBE multipurpose chair Seat & back are crafted from a durable polypropylene shell, with the shell made through precision injection moulding. Engineered for outdoor and semi-outdoor use, the chair is treated with UV stabilization to resist fading, discoloration, and wear – ensuring long-lasting colour and strength even under direct sunlight. Its stackable design offers easy storage, while integrated arms provide added comfort. Available in a vibrant colours of Green, Black, Beige White, yellow, Grey, Orange floor to seat height - 470 mm, Over all height - 750 mm, Arm to arm - 567 mm, depth - 528 mm

S.S.DINING TABLE 900MM: Supply & placing SS finish Dining Table having dimension 900 mm Diameter x 1000 mm HT. Complete table shall be made out of SS 304 Grade, in matt finish & Argon welding.TOP SHALL BE MADE OUT OF S.S. 304 with stiffner for support.Understructure shall be made out of SS 304 grade round pipe. Understructure bottom will have Teflon bush.

ROUND TABLE 600MM: Supply & placing S3 buddy Round Table having dimension 600 mm Dia x 450 mm HT. Top - Is made up of made 25mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Reversed chamfering is done on all sides for the table and chamfered area is sealed by white foil. Top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section Understructure - Leg base is made up of 8mm thick CRCA sheet CRCA sheet confirming to IS 513: 2008 with powder coated finish up to 50 to 60 Micron having a base length of 420 mm. Legs are fitted to the ground with 52.6x19.3mm Nylon bush which is having 0.5R on the corner in standard grey colour (RAL 7042). Vertical member is made up laser cut MS Ø76 X 1.6MM THK MS pipe confirming the IS 4923with powder coated finish up to 50 to 60 Micron having height of 420 mm.

DIVANO UBER CLOVE CHAI: Supply & Placing Divano Uber Clove Chair With L13 Base.Shell - Precision Manufacture Of Complete Inner Metal Frames With High Accuracy & Low Telerance To Provide Strength & Durability. Upholstrey - Easy To Maintain Premium Fabric Upholstrey From Gta Base / Legs - Beech Wooden Base Foam - Injection Moulded Cmrh Foam 50 -55 Density For Dimensional Stability. Heavy Duty Elastic Straps For Webbing Wooden Strips At Bottom For Fabric Stapling To Provide Clean Finish. Can Be Offered In Dual Tone Finish

DINING TABLE 1200MM: Supply & placing SS finish Dining Table having dimension 1200 mm Diameter x 750 mm HT. Complete table shall be made out of SS 304 Grade, in matt finish & Argon welding.TOP SHALL BE MADE OUT OF S.S. 304 with stiffner for support.Understructure shall be made out of SS 304 grade pipes. Understructure bottom will have Teflon bush.

Nosh chair: Supply and placing Nosh chair with MOULDED PLY SHELL: The Nosh shell is made up of moulded ply in Veneer or Laminate finish. Shell size - 420 mm (W) X 410 mm (D) X 440 (H) X Thickness 12 mm. UNDERSTRUCTURE: The Understructure is made up of Diameter 19 x 1.6 mm thk and 2mm MS plate welded with it. Powder Coating done in Texture Metallic Silver Color having DFT – 50 to 80 micron. FOOT PAD: The foot pad is made up of injection moulded in polypropylene

S.S.DINING TABLE 2000X1000X750MM: Supply & placing of Spacewood make ( SOS) SS finish Dining Table having dimension 2000 mm L x 1000 mm D x 750 mm HT. Complete table shall be made out of SS 304 Grade, in matt finish & Argon welding. TOP SHALL BE MADE OUT OF S.S. 304 with stiffner for support. Understructure shall be made out of SS 304 grade 40 x 40 Square pipes. Table will have provision of footrest. Legs bottom will have Teflon bush.

Parking Suspended Sign IDDS 50 mm: Providing a signs made as using Cosign India make Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa made from virgin homogeneous aluminium billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions.Sign is double sided 50 mm depth profile with media accomodation depth of 6 mm media of ACP acrylic upto 5 mm thickness can be pasted directly on frames or attched on frame with help of dual lock tape.Sign can be edge lite with help of edge lite led modules ,led of LUCOLED make EL31 , fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Department Nameplate Sign MPI Wall mounted (Door/Wall): Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa made from virgin homogeneous aluminium billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions.Sign is single sided with 1 aluminium profile click fitted on 2 plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Room name Sign MPI Wall mounted (Door/Wall): Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa made from virgin homogeneous aluminium billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions.Sign is single sided with 1 aluminium profile click fitted on 2 plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Passage suspended Sign MPI suspended (Ceiling): Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa made from virgin homogeneous aluminium billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 Years warranty under normal working conditions.Sign is double sided with 2 aluminium profiles connected with each other with 2 plastic moulded endcaps.Galvanised iron multistrand twisted 2 mm diameter wire (upto1.5 meter in length) with Stainless steel eco-suspension clips screw fitted directly in ceiling (rigid base) engaged with wire stainless steel eco suspension clips with wire adjustment mechanism.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Small Suspended Sign MPI suspended Ceiling: Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa made from virgin homogeneous aluminium billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 Years warranty under normal working conditions.Sign is double sided with 2 aluminium profiles connected with each other with 2 plastic moulded endcaps.Galvanised iron multistrand twisted 2 mm diameter wire (upto1.5 meter in length) with Stainless steel eco-suspension clips screw fitted directly in ceiling (rigid base) engaged with wire stainless steel eco suspension clips with wire adjustment mechanism.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Building Directory Sign MPI Directory (Wall): Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa made from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions.Sign is single sided with aluminium side tracks and common click clips for panel fitting. a.Sign is including all plastic injection moulded clips black in shade which are slided in side tracks ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Closet Door Sign MPI Wall mounted (Door/Wall): Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa made from virgin homogeneous aluminium billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions.Sign is single sided with 1 aluminium profile click fitted on 2 plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Changeable Snapframe Optiframe A3 (Wall): Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions. Sign flip profiles with 32 mm visible border.Sign has high quality plastic moulded base with slightly flexible in nature, with wall mountiing screw position hidden beneath the flip profiles. and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Staircase ID sign MPI Wall mounted (Door/Wall): Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa made from virgin homogeneous aluminium billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions.Sign is single sided with 1 aluminium profile click fitted on 2 plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Drinking Water Sign MPI Wall mounted (Door/Wall): Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa made from virgin homogeneous aluminium billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions.Sign is single sided with 1 aluminium profile click fitted on 2 plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Toilet Door Sign: Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa made from virgin homogeneous aluminium billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions.Sign is single sided with 1 aluminium profile click fitted on 2 plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Lift Number sign MPI Wall mounted (Door/Wall): Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa made from virgin homogeneous aluminium billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions.Sign is single sided with 1 aluminium profile click fitted on 2 plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Lift In case of fire use stairs I SIGN FIX 10mm (Wall): Providing sign of Cosign make Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa Made from virgin homogeneous aluminium billet) with premium grade anodizing (Thickness 15-20 microns) as peinternational standards, with 10 years warranty under normal working conditions. Profile to form frame with overall depth of 10 mm with media of thickness upto 3mm. 2 mm thick acrylic/ACP . I-sign Fix profile of Cosign make with M.S zinc coated corners with grub screws. Installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Emergency Exit sign ES01 (Ceiling): Providing ready sign & fixing at location a Cosign make emergency exit sign- illuminated, surface mount (wall or ceiling) Dual sided made up of plastic material , battery backup of 3 hours (180 mins) .Battery life of 300 cycles of charge & discharge Li- ion battery 3.7 Volt, 100 mA, Charge time of 24 hours. Input voltage 220-240 Volt A.C, 50/60 Hz. Viewing distance 30 meter, degree of protection IP20 (rating for protection against solid object upto 12 mm) white light colour full back (white colour) LED illumination with green white coloured graphic inserted on both sides on 0.4 mm PC (sizes, texts, symbols or graphics as per standard safety norms & regulations) graphic options of -left ,right, up staircase down staircase. Test facilty button self test plus auto self test, opreration in maintained and non maintained mode (power saver mode).Sign with 12 months warranty for electric circuit & 6 months warranty for battery. Sign provided with dual mounting arrangement of mounting on wall & celing both ( with flat rigid support/base).Sign is including all connection wires (upto 1 mtr) & high tensile strength zinc coated self tapering screws (4 nos with screw wall plastic packing), installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Sarthi Upkendra Kolhapur with logo (Size of Letters - 100 inch x 109 inch)(Size of Logo - 100 inch x 110 inch): Providing and fixing MS (Mild Steel) backlit LED letters, fabricated from high-grade MS sheets with a powder-coated finish for durability and corrosion resistance. Each letter shall be internally illuminated with high-brightness waterproof LED modules, ensuring uniform halo backlighting and long service life. The signage shall include a concealed wiring system with all necessary power supplies, drivers, and mounting supports. The entire assembly shall be fixed on a robust MS frame structure, properly aligned and secured to the surface as per site conditions. The finished signage shall exhibit a clean, premium appearance with excellent night visibility and long-term performance suitable for outdoor installation.

Chatrapati Sambhaji Maharaj Vidhyarthi Vastigruha (Size of Letters - 207 inch x 16 inch) : Providing and fixing MS (Mild Steel) backlit LED letters, fabricated from high-grade MS sheets with a powder-coated finish for durability and corrosion resistance. Each letter shall be internally illuminated with high-brightness waterproof LED modules, ensuring uniform halo backlighting and long service life. The signage shall include a concealed wiring system with all necessary power supplies, drivers, and mounting supports. The entire assembly shall be fixed on a robust MS frame structure, properly aligned and secured to the surface as per site conditions. The finished signage shall exhibit a clean, premium appearance with excellent night visibility and long-term performance suitable for outdoor installation.

Chatrapati Shahu Maharaj Sangrahalay Vachnalay Abhyasika (Size of Letters - 123 inch x 62 inch): Providing and fixing MS (Mild Steel) backlit LED letters, fabricated from high-grade MS sheets with a powder-coated finish for durability and corrosion resistance. Each letter shall be internally illuminated with high-brightness waterproof LED modules, ensuring uniform halo backlighting and long service life. The signage shall include a concealed wiring system with all necessary power supplies, drivers, and mounting supports. The entire assembly shall be fixed on a robust MS frame structure, properly aligned and secured to the surface as per site conditions. The finished signage shall exhibit a clean, premium appearance with excellent night visibility and long-term performance suitable for outdoor installation

Chatrapati Shahu Maharaj Shanshodhan Prashikshan va Vikas Sanstha (Sarthi), Kolhapur with Logo (Size of Letters - 503 inch x 20 inch): Providing and fixing MS (Mild Steel) backlit LED letters, fabricated from high-grade MS sheets with a powder-coated finish for durability and corrosion resistance. Each letter shall be internally illuminated with high-brightness waterproof LED modules, ensuring uniform halo backlighting and long service life. The signage shall include a concealed wiring system with all necessary power supplies, drivers, and mounting supports. The entire assembly shall be fixed on a robust MS frame structure, properly aligned and secured to the surface as per site conditions. The finished signage shall exhibit a clean, premium appearance with excellent night visibility and long-term performance suitable for outdoor installation

Maharani TaraRani Vidhyarthini Vastigruha (Size of Letters - 187 inch x 16 inch): Providing and fixing MS (Mild Steel) backlit LED letters, fabricated from high-grade MS sheets with a powder-coated finish for durability and corrosion resistance. Each letter shall be internally illuminated with high-brightness waterproof LED modules, ensuring uniform halo backlighting and long service life. The signage shall include a concealed wiring system with all necessary power supplies, drivers, and mounting supports. The entire assembly shall be fixed on a robust MS frame structure, properly aligned and secured to the surface as per site conditions. The finished signage shall exhibit a clean, premium appearance with excellent night visibility and long-term performance suitable for outdoor installation

Rajmata Jijau Sabhagruha (Size of Letters - 149 inch x 19 inch): Providing and fixing MS (Mild Steel) backlit LED letters, fabricated from high-grade MS sheets with a powder-coated finish for durability and corrosion resistance. Each letter shall be internally illuminated with high-brightness waterproof LED modules, ensuring uniform halo backlighting and long service life. The signage shall include a concealed wiring system with all necessary power supplies, drivers, and mounting supports. The entire assembly shall be fixed on a robust MS frame structure, properly aligned and secured to the surface as per site conditions. The finished signage shall exhibit a clean, premium appearance with excellent night visibility and long-term performance suitable for outdoor installation.

Please Enable Macros to View BoQ information