Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.7 LAccepted-Finance | L1 | Accepted-Finance L1 | |
| 2 | L2₹2.8 L+₹11,900 (4.42%)Accepted-Finance | L2 | Accepted-Finance L2 | |
| 3 | L3₹2.9 L+₹19,500 (7.24%)Accepted-Finance | L3 | Accepted-Finance L3 | |
| 4 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Others-USED PYT LEVEL CARD AGAINST THE CONDITION OF A/B/C/D |
Tender Value
₹3 L
Closing Date
11 Mar 2022, 4:30 pmClosed
xen rew kathua
xen rew kathua
Construction of community sanitary complex unit near GPS panyalag
2022_RDPR_163150_10
e-NIT No. 342/REW/K of 2021 Dated 05/03/2022
Open Tender
Civil Works
Item Rate
20 days
duggan
sbd
2 documents required · 2 mandatory
₹500
Yes
xen rew kathua
Exempted
14 Mar 2022
5 Mar 2022
12 Mar 2022
6 Mar 2022
11 Mar 2022
6 Mar 2022
Amount
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth for 1 meter from cutting edge and disposal of surplus excavated earth as directed:
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand)
Providing & fixing upto floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases etc. including hoisting and setting in position with cement mortar 1:3 (1 cement:3 coarse cost of required centring, shuttering and curing complete
Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand)
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level , Thermo-Mechanically Treated bars of grade Fe-500D or more.
Centering and shuttering including strutting, propping etc. and removal of form work for:
Suspended floors, roofs, landings, balconies and access platforms.
Edges of slabs and breaks in floors and walls under 20 cm wide
15 mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4fine sand)
12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)
12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 4 ( 1 cement : 4 fine sand)
6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angles 40x40x6mm for diagonal braces
Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade
Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making the walls etc.: Internal work-Exposed on wall
15 mm dia. nominal bore .
20mm dia nominal bore
Providing and fixing G.I union in G.I pipes including cutting and threading the pipes and making long screws etc. complete (new work) 15mm dia nominal bore
Providing and fixing wash basin with C.I /M.S brackets 15mm C.P bras pillar taps , 32mm C.P bras waste of standard pattern , including Painting of fittings and brackets , cutting and making the good walls wherever . white vitrerous China . size wash basin 630x450mm with pair of 15mm c.p brass pillar tap .(make cera/equivalent)
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipe and fitting.(make cera/equivalent)
Providing and fixing PTMT grating of approved grating of approved quality and colour . circular type 125mm nominal dia with 25mm waste hole(make jaquar/cera/equivalent)
Providing and fixing cp bib cock of approved quality 15mm nominal bore complete job (make jaquar/ cera /equivalent) Short nose
Providing and fixing C.P brass angle valve For basin mixer and gyser points of approved make confirming to IS:8931. 15mm nominal bore complete job .(make jaquar/cera/equivalent)
Providing and fixing 110mm dia. PVC waste water / sewerage pipe of 4 kg pressure per sqm of supreme / prince/ finoeix make prakash surya
Providing and fixing unplasticised PVC connection pipe with brass union 30cm length 15mm nominal bore
Providing and fixing of 600x120x5 mm glass shelf with edges round off supported on aluminium angle frame with cp brass brackets and guard rail complete fixed with 40 mm long screws etc make jaquar/cera
Providing and fixing ball valve ( brass) of approved quality complete high or low pressure with plastic floats 15mm dia nominal bore
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Refer CPWD DSR E&M 2018 Item No. 1.10.1). Havells/Anchor/Equivalent make
Group c
Supplying and fixing suitable G.I. box with modular plate and cover in front on surface or in recess , including providing and fixingg 3 Pin 5/6 A modular socket outlet and 5/6A modular switch connection etc as reqd Havells/Anchor/Equivalent make
Suppling and fixing 5A to 32A rating, 240/415 V , 10 kA, "C" Curve , miniture circuit breaker suitable for inductive load of following poles in the existing MCB, DB complete with connection, testing and commissioning etc as reqd Havells/Anchor/Equivalent make
Supply of LED Lamp 9 watt.Havells/Anchor/Equivalent make
Supplying and fixing 16 mm sq 2core aluminium cable as required. Havells/Anchor/Equivalent make
Providing and placing on terrace on all floor levels polythene water storage tank ISI;12701 marked indicating the bis no with cover and suitable locking arrangements and making the necessary holes for inlet, outlet and overflow pipes including fitting and the base port for tanks syntax , electroplast , star , lotus, or equivalent having ISI make .
Providing and fixing Motor pump of ½ HP of sharp ,bajaj,or equivalent make including fittings (complete job)
Providing and fixing soap dish of approved quality
Providing and fixing white vitrous china pedestal type water closet ( European type wc pan) with seat and lid ,10 litre low level pipe with PVC flushing cistern including flush type with manually controlled device conforming to IS:7231 with all fittings and fixures, complete including cutting and making good the walls and floors where ever required.(make cera/equivalent)
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: semi rigid pipe 32 mm dia
Providing and fixing 4" pvc floor trap of app make and manufacturers
Providing and fixing soil, waste and vent pipes :75 mm diameter. 75 mm diameter. 18.35.2.1 Sand cast iron S and S pipe as per IS:1729
Providing and making CIB of approved size by way of making another layer of 12 mm thick plaster with 1:4 cement mortar on front side outer plastered surface, painting and writings as per the direction of engineer in-charge including supply of materials, carriages all complete. L.M.R.
Mr Javeed Ahmed
GLOBAL ENGINEERS
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .