RUNWAY, TAXI TRACK PAINTING AT AF STN BKT

M&L for cultivating/ploughing on an average 30cm depth of shoulders pavement of airfield with mechanicalls or manuameans and levelling the surface as per required gradient after removing/cleaning vegetation, grass with roots, brick bats, stone aggregate and other foreign materials etc.The useless material removing and deposited in low laying area out side of the defence land at any lead complete all as specfied and directed.

M&L for cultivating ploughing on an average 30cm depth of other than shoulders pavement of airfield with mechanically or manualmeans and levelling the suface as per required gradient after removing/cleaning vegetation, grass with roots, brick bats, stone aggregate and other foreign materials etc.The useless material removing and deposited in low laying area out side of the defence land at any lead complete all as specfied and directed.

Rolling and consolidating the formation surfaces by using pneumatic roller or static/power roller of capacity 8 to 12 tonne complete all as specfied and directed.

M&L for complete removal of existing thermoplastic / water base paint layer (any number of layers) over concrete, black bituminous pavements surfaces by mechanial means including removal & cleaning etc complete all as specified and directed.

M&L for scraping & preparation of new/old treated horizontal concrete or bituminous roads, pavements surfaces exceeding 10 cm width or girth with wire brushes etc and painting lines, dashes, strips, circles and other markings with two coat of water thinable/matt finished road marking retro reflective paint over and including a coat of primer white/orange/yellow/black or any other colour as approved by GE using mechanical pavement marking machine (Air/Airless spray applications as per IS 164) complete all as specified and directed. Make: Apcotrack manufactured by Asian paints/ Berger/Nerolac (1st quality). Note:- Thickness of paint shall be minimum 40 micron (Dry film thickness) for each coat after application. Specification of the machine is as under:- Graco line lazer 5900/7900 with 2 guns and the maximum GPM(LPM) : 1.60 (6.0), PSI (Bar) : 3300 (227), Engine cc (HP) : 160 (5.5) and maximum tip size : 0.043 or Graco line lazer 200 HS with 2 guns and the maximum GPM(LPM) : 2.15 (8.14), PSI (Bar) : 3300 (227), Engine CC (HP) : 200 (6.5) and maximum tip size : 0.047.

M&L for scraping & preparation of new/old treated horizontal concrete or bituminous roads, pavements surfaces exceeding 10 cm width or girth with wire brushes etc and painting lines, dashes, strips, circles and other markings with one coat of water thinable/matt finished road marking retro reflective paint white/orange/yellow/black or any other colour as approved by GE using mechanical pavement marking machine (Air/Airless spray applications as per IS 164) complete all as specified and as directed. Make: Apcotrack manufactured by Asian paints/ Berger/Nerolac (1st quality). Note:- Thickness of paint shall be minimum 40 micron (Dry film thickness) for each coat after application. Specification of the machine is as under:- Graco line lazer 5900 /7900 with 2 guns and the maximum GPM(LPM) : 1.60 (6.0), PSI (Bar) : 3300 (227), Engine cc (HP) : 160 (5.5) and maximum tip size : 0.043 or Graco line lazer 200 HS with 2 guns and the maximum GPM(LPM) : 2.15 (8.14), PSI (Bar) : 3300 (227), Engine CC (HP) : 200 (6.5) and maximum tip size : 0.047.

M&L for scraping & preparation of new/old treated horizontal concrete or bituminous roads, pavements surfaces not exceeding 10 cm width or girth with wire brushes etc and painting lines, dashes, strips, circles and other markings with one coat of water thinable/matt finished road marking retro reflective paint white/orange/yellow/black or any other colour as approved by GE using mechanical pavement marking machine (Air/Airless spray applications as per IS 164) complete all as specified and as directed. Make: Apcotrack manufactured by Asian paints/ Berger/Nerolac (1st quality) or equivalent make as specified as approved by GE. Note:- Thickness of paint shall be minimum 40 micron (Dry film thickness) for each coat after application. Specification of the machine is as under:- Graco line lazer 5900/7900 with 2 guns and the maximum GPM(LPM) : 1.60 (6.0), PSI (Bar) : 3300 (227), Engine cc (HP) : 160 (5.5) and maximum tip size : 0.043 or Graco line lazer 200 HS with 2 guns and the maximum GPM(LPM) : 2.15 (8.14), PSI (Bar) : 3300 (227), Engine CC (HP) : 200 (6.5) and maximum tip size : 0.047.

Desilting of storm water drain by surface excavation in soft/loose soil settled deposited soil /earth/silt/mud etc not exc 15cm deep from bed of drain, dressing in 'V' shape to drain including cleaning of shrubs, vegitation and grass etc whatsoever with therein, bed of drain including getting out and removing excavated material and deposited the same to a distance not. exc 50 m complete all as specified and directed.

M & L for preparation of old concrete/plastered/kerb stone surfaces of any description not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint including necessary rubbing with sand paper or grinded by hand grinder to achieve smooth and even surface complete all as specified and directed.

M & L for preparation of old concrete/plastered/kerb stone surfaces of any description not otherwise described and not exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint including necessary rubbing with sand paper or grinded by hand grinder to achieve smooth and even surface complete all as specified and directed.