Landscaping Development Works at the Existing Road Area Between Stores Buildings and Hangar 1 at LCA Tejas Plant I HAL BC.

Earth work in excavation in all kinds of soilby mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge

Supplying, mixing and placing plain cement concrete (1:4:8) of required thickness using 40 mm and down graded hard stone/granite aggregate in accordance with IS 456 in foundations, mass concrete, sub bases, floors, pavings and other similar works including necessary formwork, mechanicalmixing, transporting, vibrating, consolidation, levelling,curing, dewatering if any, all materials, labour, lead & lift, tools,plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions etc., all complete as directed by the Engineer-in-Charge.

Formwork for foundations including rafts, footings, foundation beams, plinth beams, pedestals etc. by providing timber, wooden planks, runners / M.S. sheets with all supports, struts, braces, wedges, scaffolds, bracings, ladders, gangways, dressing with oil including M.S. bolts nuts and washers, temporary openings, filleting for a stop, chamfered edges, internal / external splayed, rounded angles or grooves for forming throating including providing necessary sleeves for openings if any, removing the same from the site after completion of work etc., all complete as directed by the Engineer-in-Charge for the sub-items mentioned below.Note: Formwork material is contractor's own property and shall be removed after completion of work.

Supplying, straightening, fabricating and fixing steel reinforcement of HYSD TMT bars of not less than Fe 500 conforming to IS 1786 for all concrete reinforcment members / works including cutting to length, bending to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with mild steel wire (Annealed) not less than 0.9 mm dia or securing with clips, including fixing and bracing, wastage, welding, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it etc., complete all as per specifications, drawings and as directed by the Engineer-in-Charge. Note : Only authorized laps, chairs etc. shall be considered for measurement.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. Concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived form natural sources : 4 graded stone aggregate 20 mm nominal size derived form natural sources)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) as directed by Engineer-in-Charge.

Providing, applying and laying cement mortar (1:4) plastering 15 mm thick on brick/concrete surfaces, finished even and smooth with trowel for internal walls etc., with necessary materials, labour, scaffolding, curing, tools and tackles etc., at all heights, all complete as directed by the Engineer-in-Charge.

Supplying and Painting with synthetic enamel paint of approved brand and manufacture of required colour on old wooden surfaces to give an even shade including preperation of surfaces and filling the crevises, etc., all complete as directed by the Engineer-in-Charge.

Supplying and Stacking at Site (Good Earth)including spreading of good earth in planter boxes all complete as directed by the Engineer-in-Charge. [Earth measured in stacks will be reduced by 20% for voids for payment]

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, 20 mm nominal outer dia Pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 20 mm nominal bore

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Supplying,stacking and spredaing of red earth of average thickness 100mm suitable for horticulture works,free from clots or lumps,morrum,shinglr,rocks,stones,brick bats,building rubbish and any other foreign matter as locally prevalent,etc., all complete as directyed by Engineer-in-charge.[Earth measured in stacks will be reduced by 20% for voids for payment]

Supplying,stacking and spredaing of well composed cow dung manure,free from husk,earth,stones,brick bats and other extraneous stuff,etc.,all complete as Directed by Engineer In charge .[Manure measured in stacks will be reduced by 8% for voids for payment]

Suppling and Planting of Eugenia plants(Dwarf) in plastic covers or pots in well grown condition,minimum of 1' height above plastic covers or pots,as approved by HAL,Drying and dying plants will be rejected,including Earthwork excavation in post holes or similar holes and sapling of plants. mixing the avilable red earth and manure in required proportion and quantity and putting in the pit for plants,etc.,all complete as directed by Engineer-in-charge .

Suppling and planting of Golden Cypress plants in plastic covers or pots in well grown condition,minimum of 1' height above plastic covers or pots,as approved by HAL,Drying and dying plants will be rejected,including Earthwork excavation in post holes or similar holes and sapling of plants. mixing the avilable red earth and manure in required proportion and quantity and putting in the pit for plants,etc.,all complete as directed by Engineer-in-charge.

Suppling and planting of Raphis palm plants(Dwarf) in plastic covers or pots in well grown condition,minimum of 1' height above plastic covers or pots,as approved by HAL,Drying and dying plants will be rejected,including Earthwork excavation in post holes or similar holes and sapling of plants. mixing the avilable red earth and manure in required proportion and quantity and putting in the pit for plants,etc.,all complete as directed by Engineer-in-charge .

Suppling and planting of Areca palm plants in plastic covers or pots in well grown condition,minimum of 1' height above plastic covers or pots,of different colours like pink,red,white,yellow,etc.as approved by HAL,Drying and dying plants will be rejected,including Earthwork excavation in post holes or similar holes and sapling of plants. mixing the avilable red earth and manure in required proportion and quantity and putting in the pit for plants,etc.,all complete as directed by Engineer-in-charge.

Suppling and planting of Murraya exotica plants (Dwarf)in plastic covers or pots in well grown condition,minimum of 1' height above plastic covers or pots,as approved by HAL,Drying and dying plants will be rejected,including Earthwork excavation in post holes or similar holes and sapling of plants. mixing the avilable red earth and manure in required proportion and quantity and putting in the pit for plants,etc.,all complete as directed by Engineer-in-charge.

Suppling and planting of Eranthimum plants in plastic covers or pots in well grown condition,minimum of 1' height above plastic covers or pots,of different colours like pink,red,white,yellow,etc.as approved by HAL,Drying and dying plants will be rejected,including Earthwork excavation in post holes or similar holes and sapling of plants mixing the avilable red earth and manure in required proportion and quantity and putting in the pit for plants,etc.,all complete as directed by Engineer-in-charge.

Suppling and planting of Petra croton plants in plastic covers or pots in well grown condition,minimum of 1' height above plastic covers or pots,as approved by HAL,Drying and dying plants will be rejected,including Earthwork excavation in post holes or similar holes and sapling of plants. mixing the avilable red earth and manure in required proportion and quantity and putting in the pit for plants,etc.,all complete as directed by Engineer-in-charge.

Suppling and planting of Bougain villea plants (Dwarf) in plastic covers or pots in well grown condition,minimum of 1' height above plastic covers or pots,of different colours like pink,red,white,yellow,etc.as approved by HAL,Drying and dying plants will be rejected,including Earthwork excavation in post holes or similar holes and sapling of plants.mixing the avilable red earth and manure in required proportion and quantity and putting in the pit for plants,etc.,all complete as directed by Engineer-in-charge.

Suppling and planting of Cuphea plants in plastic covers or pots in well grown condition,minimum of 1' height above plastic covers or pots,of different colours like pink,blue,white,etc.as approved by HAL,Drying and dying plants will be rejected,including Earthwork excavation in post holes or similar holes and sapling of plants. mixing the avilable red earth and manure in required proportion and quantity and putting in the pit for plants,etc.,all complete as directed by Engineer-in-charge.

Suppling and planting of Ixora plants(Dwarf) in plastic covers or pots in well grown condition,minimum of 1' height above plastic covers or pots,of different colours like pink,red,yellow,etc.as approved by HAL,Drying and dying plants will be rejected,including Earthwork excavation in post holes or similar holes and sapling of plants. mixing the avilable red earth and manure in required proportion and quantity and putting in the pit for plants,etc.,all complete as directed by Engineer-in-charge.

Suppling and planting of Aclypha plants in plastic covers or pots in well grown condition,minimum of 1' height above plastic covers or pots,of different colours like pink,red,white,yellow,etc.as approved by HAL,Drying and dying plants will be rejected,including Earthwork excavation in post holes or similar holes and sapling of plants. mixing the avilable red earth and manure in required proportion and quantity and putting in the pit for plants,etc.,all complete as directed by Engineer-in-charge.

Suppling and planting of Poinisettiya plants in plastic covers or pots in well grown condition,minimum of 1' height above plastic covers or pots,of different colours like pink,red,white,etc.as approved by HAL,Drying and dying plants will be rejected,including Earthwork excavation in post holes or similar holes and sapling of plants. mixing the avilable red earth and manure in required proportion and quantity and putting in the pit for plants,etc.,all complete as directed by Engineer-in-charge .

Maintaining the area of lawn and tree saplings as well as surrounding area developed as per above items of this contract by grass cutting,removing all wastes ,watering periodically,handing over to civil maintenance Department in well developed condition at the end of the maintenence period etc., all comple as directed by the engineer incharge .[Minimum one labours,8hours/day with uniform and shoes and shall be positioned for the work and the labour shall be paid minimum wages along with ESI,PF,EDLI,Service charge,etc. Absent mandays is subjected to deduction per day basis]

Total (Exclusive of GST)

GST @ 18% for total value on Sl.No. 28

Total amount (Inclusive of GST) Sl.No. 28 + Sl.No. 29

Preamble: 1. The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The Tenderer shall abide by prevailing GST act. 2. L1 (lowest quote) will be determined based on the total quoted amount including GST. 3. This BOQ specification has to be read in conjunction with detailed technical specification and tender drawings if any. 4. Please refer Tender document carefully and understand full scope of work, Terms and conditons, if required visit the site and then submit your quote as no clarification will be entertained later on account of ignorance of the work/site.

Pre-Qualification Profile (To be Uploaded along with Part - A)

Contract Number:

Name of the individual/ Firm/ Company:

Estimation Amount In Rs:

Tender Notice Date:

GST ID No. For HAL

Name of the individual/ Firm/ Company: *Mandatory

Type of ownership

If Other, please specify

Details of Constitution or Legal Status such as certificate of Incorporation, shops and establishments, Contractor registration

Address for Correspondence

Contact Details

Contact Person Name

Designation

Mobile no

Ph. No with STD Code

FAX. No with STD Code

Email Id

Registered Contractor

If Registered Contractor with HAL YES/NO

Registration No

Category

PEMD amount (if paid)

I.T Returns for past 03 Years (Assessment Years)

Average Annual Financial Turnover during the last 3 years, ending 31st March 2023 of the previous financial year[should not be less than 30% of Amount put to tender]

ESI & PF Nos. with proof

ESI Registration No. with proof [Mandatory]

PF Registration No. with proof [Mandatory]

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Bank Account No.

Name of the Bank

Type of Account

Branch, Place

Bank Code No.

MICR No.

ECS No.

IFS Code No.

Latest Bankers Solvency certificate from any Nationalized /Scheduled Bank issued NOT before 12 months from the last date of Tender submission .

Name of the Bank & Branch

Date of issue

Value in Rs.

Solvency Value is as per NIT

Experience of having successfully completed similar works during last 7 years ending last day of previous month [ Latest work experience certificate may be uploaded] (i) Three similar completed works each costing not less than an amount equal to 40% of estimated cost. (ii) Two similar completed works each costing not less than an amount equal to 50% estimated cost. (iii) One similar completed work costing not less than an amount equal to 80% estimated cost.

Completed similar works during last 7 years

Work No I

Brief Description of Work

Completed value of Work in Rs.

Date of Commencement of Work:

Date of Actual Completion of work:

Work No II

Brief Description of Work:

Completed value of Work in Rs.

Date of Commencement of Work:

Date of Actual Completion of Work:

Work No III

Brief Description of Work:

Completed value of work in Rs.

Date of Commencement of Work:

Date of Actual Completion of Work:

Details of person holding the Power of Attorney ( if different from the contact person)

Designation

Mobile no

Ph. No with STD Code

FAX. No with STD Code

Email Id

Documents Need to Uploaded

IT Return, Profit & loss and Balance Statement for the Financial Year duly mentioned above certified by the Chartered Accountant.

DECLARATION I

The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions Including price bid do here by accept all the terms and conditions laid doen In the said Tender document and will abide by the same on acceptance and ward of work.

DECLARATION II

I/We declare and confirm that - 1. All Information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false Information provided herein will result In the rejection of my offer. 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I/We aware that document sought only be uploaded for evaluation of offer.