CERTAIN PETTY REPAIR AND DAY TO DAY MAINT COMPLAINT IN OMQ AREA, REPAIR/MAINT OF ROOF OF VARIOUS TECH ACCNS INCL STORAGE BLDGS IN WSA AREA AND REPAIR/MAINT OF EARTHING OF DBS AT VARIOUS LOCATIONAT AF STN HASIMARA UNDER GE (AF) HASIMARA

Amount

Taking down shutters of any description exc 1 sqm not exc 2 sqm each, complete all as specified and as directed.

Taking down chowkats or frames of any description/material exc 1.50 Sqm but n. exc. 4 Sqm each with shutters without taking off shutters from frame, complete all as specified and as directed.

Taking down chowkats or frames of any description/material not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames), complete all as specified and as directed.

Resecuring or easing & adjusting without taking down of shutter of any description exc 1 & n.exc 2 Sqm, complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided and removing from site, complete all as specified and as directed.

S&F 105X60mm size pressed steel door frames with one or more rebates including necessary fixing lugs, hinges lock strike plate etc, complete all as specified and as directed.

S&F 125X60mm size pressed steel door frames with one or more rebates including necessary fixing lugs, hinges lock strike plate etc, complete all as specified and as directed.

S & F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet, complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet used instead of plain colour PVC sheet. Stile and rails feathered at edges for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of both side Prelam PVC sheet used instead of Plain colour PVC sheet. to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable Prelam PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site, complete all as specified and as directed.

S&F for 150mm long aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and as directed.

S&F for 100mm size aluminium handles, cast type, anodised, complete all as specified and as directed.

S&F for 200mm long aluminum anodized barred tower bolts of extruded section, complete all as specified and as directed.

S&F for aluminium handle 125mm long cast type anodised ('D' shaped), complete all as specified and as directed.

S&F for 75mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin anodised type - C-21, complete all as specified and as directed.

S&F for 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed.

S&F factory made solid wire gauzed i.e. panel will be of wire gauze pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and Single Side Prelam PVC sheet for top rail, lock rail & bottom rail on either side having one side feathered edge and on other side 10mm 900 bent edge & as gap insert for top rail & bottom rail; i.e. panel will be of wire gauze. The wire gauze shall be wrapped on an additional square 8mm M.S. solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly, complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter with wood board core free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC sheet polyurethane painted on the front face & 2mm prelam PVC sheet on back face, supplying & fixing in frame at site, complete all as specified and as directed.

S&F for 30mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed.

S&F in repairs mild steel helical door spring 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and as directed.

S&F in repairs for 75mm size hasp and staple, aluminium anodised safety type with hinge pin including bolt to hinge plate with screw, complete all as specified and as directed.

S & F in repairs floor door stopper 140mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overal length of cover plate, complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing, complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and as directed.

Supply and fix 2nd class hardwood, plain, solid straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

Supply and fix 35mm thick, 2nd class hardwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats, complete all as specified and as directed.

Supply and fix factory made ready to install non-toxic, lead & cadmium free, single extruded, water proof, termite proof, fire retardant, excellent screw holding capacity, solid PVC boards, 18mm thick of white colour as in cupboard shelves fixed to guide rails with stainless steel screws, complete all as specified and as directed.

Supply and fix 100mm size mild steel butt hinges medium weight cold rolled, complete all as specified and as directed.

Preparing of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint (1st grade quality) over one coat of primer, complete all as specified and as directed.

Supply and fix in repair PVC body cainet box mirror of size 350mm x 450mm x 100mm in PTMT alloy of approved design and pattern, complete all as specified and as directed.

S & F in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished, complete all as specified and as directed.

Taking down steel window, cutting u/s projected hinge and fixing/welding the box type hinge, handle, stay and refix in the same opening rates are included for cutting/welding and fixing of box type steel hinge, stay, handle etc. (box type hinge, handle and stay will measured and paid separately), complete all as specified and as directed.

Supply only box type hinge for fixing/welding in steel window, complete all as specified and as directed.

Supply only stay for fixing/welding steel window, complete all as specified and as directed.

Supply only chromium plated steel handle left/right for fixing in steel window, complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins / spring clips and providing new pins/spring clips and removing rubbish off the premises, complete all as specified and as directed.

S&F for 3mm thick plain sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqmm in each panes, complete all as specified and as directed.

S&F for 3mm thick frosted on one side sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each panes, complete all as specified and as directed.

S&F in repair of stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or fixed with tinned tracks incl wooden beads, complete all as specified and as directed.

M&L for flat iron fillets for securing wire mesh etc including necessary driling, bolting or rivetting etc comforming to Fe 290 Gde E-165, complete all as specified and as directed.

M &L for PCC (1:3:6) type C1 (using 20mm graded crushed stone aggregate as in bed plates,filling in MS pressed door frame etc, complete all as specified and as directed.

Taking down aluminium doors/window shutters of any size carrying out minor repairs/adjustment including rubber beading, aluminium beads, cleats of required size and refixing in same position, complete all as specified and as directed.

S&F powder coated anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed.

S&F powder coated anodised aluminium door shutters,aluminium section weighing 0.55kg/m including necessay joining cleats glazing clips,rubber neoprene packing handles 2 Nos in each door, hinges anodised aluminum snap beading screws etc, complete all as specified and as directed.

S & F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box , main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, complete all as specified and as directed.

S & F for 5mm thick ACP sheet in panels of aluminium door exc.0.5 Sqm in each pane with rubber beading, complete all as specified and as directed.

S&F for 75mm size aluminium mortice lock with 4 levers vertical types, complete all as specified and as directed.

S&F sheet glass, ordinary quality, 4.8mm thick in squares n exc 0.5 Sqm each pane with solar control film 25 micron reflective type (gareware sun control or equivalent), complete all as specified and as directed.

S&F door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width of aluminium (die cast) body, complete all as specified and as directed.

S&F for 20mm dia curtain rod mild steel chromium plated decorative type, complete all as specified and as directed.

S&F chromium plated bracket and other accessories for fixing of 20mm dia curtain rod to wall, complete all as specified and as directed.

Taking down 20mm bore steel water tubing and connection from wall/ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and as directed.

Supplying and laying of 20mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, complete all as specified and as directed. (Note :- The rate includes all plain CPVC fittings mean fittings which do not have any metal component (elbow, tee, socket, reducer, bushing, step over bends, end cap, end Plugs etc) and pipe cutting fixing with CPVC solvent cement and testing.(CPVC Brass fittings shall be measured & paid separately)

S&F for CPVC 20mm dia union, complete all as specified and as directed.

S&F for CPVC 20mm dia ball valve, complete all as specified and as directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth of brick wall, complete all as specified and as directed.

S&F in repairs 15mm bore fancy type, chromium plated, stop valves, concealed type, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and as directed.

S&F in repairs for vitreous china WHB white flat black size 580 x 450mm excluding pillar tap, but including 32mm dia waste pipe with CP waste coupling bracket etc, complete all as specified and as directed.

Fixing only in repairs wash basins vitreous china (flat back or angle back type) any size including cutting for and pinning ends of brackets or erecting stand, complete all as specified and as directed.

S&F waste fittings 32mm bore, brass, chromium plated for basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end, complete all as specified and as directed..

S&F PVC connection 15mm size with PTMT nuts of length 600mm, complete all as specified and as directed.

S&F PVC waste pipe for urinal/WHB/sink etc. 32mm bore with one end with socket, complete all as specified and as directed.

S&F in repair CP pillar tap 15mm bore with capstan head, screwed down high pressure with or without lettered “hot’ or “ cold” with long screwed shanks and fly nuts screwed for iron pipe, complete all as specified and as directed.

S&F in repair 10 ltrs capacity low level valve less PVC syphonic action type flushing cistern white with in let ball valve float and handle, complete all as specified and as directed.

Fixing only in repairs high or low level flushing cistern and connections to pipes and fixing of chain and pull or lever if any, complete all as specified and as directed.

S&F in repairs of 15mm bore bib taps, cast copper alloy with chromium plated fancy type, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed.

S&F in repair angular stop cock 15mm bore chromium plated, complete all as specified and as directed.

S&F in repair brass CP tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and as directed.

S&F in repair swivel shower rose of brass chromium plated 125mm size with long head arm for fixing with 15mm pipe, complete all as specified and as directed.

S&F in repair two way angular stop cock 15mm bore chromium plated, complete all as specified and as directed.

S & F in repair soap dish, of stainless steel, fixed to plugs with chromium plated brass screws, complete all as specified and as directed.

S & F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed.

S&F in repairs vitreous china EWC (padestal pattern) white 'P' or 'S' trap and including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc, complete all as specified and as directed.

S&F in repairs health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and as directed.

S&F in repairs plastic water closet seat cover white, closed pattern with flat bottom and cover and mild steel CP hinges for pedestal pan, complete all as specified and as directed.

S&F in repair, CP toilet paper holder, with cover white, box type, white with CP screws, complete all as specified and as directed.

S&F for CP grating 100mm dia with or without waste hole, fixed to floor trap, complete all as specified and as directed.

S&F for rubberised door cill width exc 30mm but n.exc 50mm, complete all as specified and as directed.

S&Fixed in repairs PVC washers for 15mm bib taps/concealed, stop cock, complete all as specified and as directed.

S&Fin repairs spindle for 15mm bib taps/concealed, stop cock, complete all as specified and as directed.

S&F in repairs internal assembly incl valveless syphon for 10 ltrs PVC flushing cistern, complete all as specified and as directed.

S&F for PTMT nipple 20mm suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) , complete all as specified and as directed.

S&F in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass and fixed (weight not less than 210 gm), complete all as specified and as directed.

S&F in repair tank cover suitable for any type of rotational moulded polyethylene water storage tanks, complete all as specified and as directed.

S&F in repair bib tap standard of PTMT any colour 15mm bore high pressure screwed for iron pipe & fixed (minimum weight 15mm-90gms), complete all as specified and as directed.

Supply and fix in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary brackets clamps or laid in trenches, complete all as specified and as directed.

Supply and fix in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary brackets clamps or laid in trenches, complete all as specified and as directed.

Supply and fix 75mm bore PVC (SWR) junction single (Single "T") equal or unequal with access door, complete all as specified and as directed.

Supply and fix in repairs 110mm bore PVC (SWR) junction single (Single "T") equal or unequal with access door, complete all as specified and as directed.

Supply and fix in repairs 75mm bore PVC (SWR) bends of any radius, complete all as specified and as directed.

All as per item No 92 here in above but 110mm bore, complete all as specified and as directed.

S&F PVC (SWR) reducers 110mm bore, complete all as specified and as directed.

M&L for 75mm PVC(SWR) floor trap, plain with grating including jointing with plain cement, complete all as specified and as directed.

Dismantling of floor, hearth or wall tiles including cement mortar bedding (but not backing) and removing rubbish off the premishes, complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM(1:6), complete all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surfaces 350x250x7mm/450x350x7mm thick as in skirting or dado on vertical surfaces of wall set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick cement plaster as in backing of tiles in CM(1:4), complete all as specified and as directed.

Cleaning the surfaces of plaster using wire brush , brooming down and washing down with water to remove dust etc. and brushing with neat cement slurry @0.5 kg/sqm with acrylic based polymer modified cementitous composite (Pidifine 2K) @ 0.50 kg/sqm, complete all as specified and as directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and as directed.

Cleaning of blocked sewage line of 100mm/150mm/200mm dia by rodding from one manhole to next manhole and washing through in fresh water including removing all sludge from the sewage lines and disposed off properly to a distance n.exc 50m, complete all as specified and as directed.

Cleaning of gully trap/nahani trap/water closet including first floor and ground floor by rodding as directed and removing the debris as directed including cutting of small vegetation where ever found at site, complete all as specified and as directed.

Cleaning of manhole of any description & any depth by using pumping/mechinery including lifting up and removing sludge & accumulated solid/semi solid sludge and any other foreign material with proper mechanical equipments & washing down with water for smooth functioning of sewage line all as directed, sludge obtained from cleaning shall be removed to a distance not exceeding 50m, complete all as specified and as directed.

M & L for precast reinforced cement concrete (1:2:4), type B-1 (using 20 mm graded crushed stone aggregate) as in cover slabs (for manholes,drain etc) and similar articles with plain faces and set in cement mortar (1:4) including demolition of reinforced cement concrete of any description and in any position, complete all as specified and as directed.

M & L for mild steel TMT bars 10mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia., or securing with clips, complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, pillars etc., separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100M, complete all as specified and as directed.

M&L for brick work with sub-class `B' old size bricks, straight or curved on plan exceeding 6M mean radius built in cement mortar (1:6), complete all as specified and as directed.

M&L for brick work with sub class 'B' Old size bricks straight or curved on plan to any radius, built in CM (1:4) as in half brick thick wall including provision of 02 Nos 8mm TMT bars at every fourth course, complete all as specified and as directed.

Taking down cement plaster on brick or concrete surfaces incl racking out joints hacking for key scrubbing down with water etc and removing rubbish off the premises, complete all as specified and as directed.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement, complete all as specified and as directed.

M & L for rendering 15mm thick in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces in cement mortar (1:4), mixed with integral water proofing compound with weight of cement in top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement, complete all as specified and as directed. (Note : WPC shall be measured and paid separately against respective item).

Supply only Liquid water proofing compound of approved make, complete all as specified and as directed.

M&L for 5mm thick rendering in cement mortar (1:3) on fair faces of brick work or concrete surfaces as in ceiling finished even and smooth without using extra cement, complete all as specified and as directed.

M & L for preparing newly plastered surfaces of internal walls, etc and applying two coats of distemper oil emulsion over a coat of alkali resistant primer, complete all as specified and as directed.

M&L for 3 coats of white washing on ceiling surfaces including preparation of new surfaces, complete all as specified and as directed.

M&L for 3 coats of white washing on newly plastered surfaces of wall including preparation of surfaces, complete all as specified and as directed.

M&L for applying two coats of cement base paint over a coat of alkali resistant primer to new plastered surfaces of wall including preparation of surface, complete all as specified and as directed.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and as directed.

M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.

M&L for preparing new wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over pink primer, complete all as specified and as directed.

Taking down/dismantling of old unserviceable earthing any type of complete with all connected items, complete all as specified and as directed.

Taking dwon old unserviceable GI earthing wire with all connected material, complete all as specified and as directed.

Taking down old unserviceable GI earthing strip 32 x 6mm, complete all as specified and as directed.

Taking down old unserviceable Copper earthing strip 32 x 6mm, complete all as specified and as directed.

Taking down old unserviceable Copper earthing strip 20 x 3.15mm, complete all as specified and as directed.

M&L for earthing complete with copper earth plate electrode 60cm×60cm× 3.15mm thick , buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.50m below normal ground level, connected to existing earth lead strip by means of bolts, nuts, check nuts and washers of brass or HS steel all as shown in electrical plate No. 5 connected to earthing test point and necessary excavation and earth work, PCC (1:2:4) type B-1 with suitable size of CI cover plate with angle iron frame and opening arrangement ) incl providing charcoal or coke and common salt in alternate layer of 15cm, compacted thickness all around the earth electrode with funnel and 20mm bore galvanized iron watering pipe (light grade) wire mesh, copper lugs, complete in all respect,including Copper earth strip 20 x 3.15 mm , 40mm bore (medium grade) galvanized iron pipe up to earthing test point as directed, incl disposal of soil to a distance not exc 50 mtr and necessary testing on completion, complete all as specified and as directed. Note : Earth result after installation completely shall be less than 5 Ohm.

M&L for machinery/equipment at power house/Sub Stn/ DB complete with steel earth plate electrode 60cm × 60cm × 6mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less'than 1.5m below normal ground level, connected to existing earth lead strip by means of bolts, nuts, check nuts and washers of brass or HS steel all as shown in electrical plate No. 5 connected to earthing test point and necessary excavation and earth work, PCC (1:2:4) type B-1 with suitable size of CI cover plate with angle iron frame and opening arrangement ) incl providing charcoal or coke and common salt in alternate layer of 15cm compacted thickness all around the earth electrode with funnel and 20mm bore galvanized iron watering pipe (light grade) wire mesh, copper lugs, complete in all respect,including galvanised earth lead wire 4.0mm, 20mm bore (light grade) galvanized iron pipe up to earthing test point as directed, incl disposal of spoil to a distance not exc 50m and necessary testing on completion, complete all as specified and as directed. Note : Earth lead strip/wire beyond 7.5m shall be measured under respective items of schedule.

All as per item No. 127 here in above but using galvanised iron strip 32×6mm as earthing lead with light grade GI pipe of 40mm dia, complete all as specified and as directed.

Supply and fix in repair 32x6 mm GI strip in short pieces on surface or in recess for all interconnecting earthing, including taking out worn out and damaged strip, complete all as specified and as directed.

All as per item No. 129 here in above but with copper strip 20 x 3.15mm, complete all as specified and as directed.

All as per item No. 129 here in above but with copper strip 32 x 6mm, complete all as specified and as directed.

All as per item No. 129 here in above but with galvanised wire 4mm dia, complete all as specified and asdirected.

M&L for high density pole-ethylene pipes 40mm bore (HDPE) of pressure rating 6 kgf/cm2 laid in trenches /walls and ceilings fixed with MS iron clamp, nuts, bolts etc, with all fitting and fixed, complete all as specified and as directed. Note : Rates inclusive of earth work, cutting chases to walls/ceiling/floor etc.

All as per item No. 133 here in above but 15mm bore, complete all as specified and as directed.

M&L for earthing pit in PCC (1:2:4) type B-1 pre-cast RCC cover slab of size 300 x 300 x 50mm with one handle made out of 8mm dia round bar, 20mm dia GI pipe of light grade for watering, funnel, wire mesh, three coats of white wash on plastered surfaces (exposed surfaces) including demolition of existing broken earth pit and removing rubbish off the premises, complete all as specified and as directed.

Supply and fixing porcelain vitreous white/brown/green spacers insulator of size 75mmx35mmx40mm height complete with one number galvanized iron stud bolts 6mm dia x 40mm long including nut & washers and two number galvanized iron fixing bolts of size 6mm dia and 50mm long including washers and drilling holes for holding/fixing aluminium strip/roof conductor as required including taking down the broken insulator, complete all as specified and as directed.

M & L for test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos. 8mm dia 25mm long hexagonal head screw, complete all as specified and as directed.

M & L for brazing of copper strip including removing of nuts, bolts, washer, excavation etc and connecting with equipment directly from earthing, complete all as specified and as directed.

M&L for non asbestos, fibre reinforced designer ceiling board, 4mm thick (610mm X 610mm) with hot-dip GI heavy duty suspended ceiling grid system T-2430 with GI frame work for seam less ceiling comprising of GI perimeter channel, unequal flanges and web etc of suitable size suspended from soffit at approx 900mm center with GIO cleat and steel expansion fastrener with and incl ceiling section incl hangers 6mm dia GI fixed to roof by means of ceiling cleats made out of GI flat, all as per manufacture's instructions including dismantling and taking down old ceiling of any description, complete all as specified and as directed.

Dismantling of asbestos cement (corrugated, semi corrugated etc.) of any thickness including ridges, hips, valleys as in roof covering and removing from site, complete all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling brick tiles or terracing tiles single layer on roof including cleaning the roof surface and filling the cracks (if observed) with silicon compound and removing rubbish off the premises, complete all as specified and as directed.

M & L for PCC (1:2:4) type B-0 (using 12.50mm graded crushed stone aggregate) as in padding including water proofing compound as per manufacturer instruction finished even and smooth without using extra, cement, complete all as specified and as directed. (Note : WPC shall be measured and paid separately in respective item).

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for,and removing rubbish off the premises, complete all as specified and as directed

M & L applying evenly a tack coat of industrial bitumen primer 85/25 @ 1.2 kg/sqm including cleaning of surfaces, complete all as specified and as directed.

M & L for APP modified membrane 3mm thick minimum weight not less than 3kg/sqm with 150 gms/Sqm, non woven polister mat as centre core reinforced laid with 75mm side overlap and 100mm end overlap. The memberane has to be laid with LPG torch and over lap shield and finished neat over roof incl two coats of green colour weather coat/acrylic paint over the APP based membrane as per manufacturer instructions, complete all as specified and as directed.

M & L for applying one coat of exterior emulsion paint on old plaster surfaces of Roof over APP membrane etc, complete all as specified and as directed by Engineer-in-charge (Shade - Dark Green/Camoflague) Note: An amount of Rs.63907.00 on account of credit schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S BIJAY KUMAR SHIVA

M/S. JOGINDER KUMAR GOYAL

SHRI PARTHA DUTTA

M/S BISHAL ENTERPRISES

M/S ROY ENTERPRISE

BHARAT ELECTRIC

Hanuman Prasad Agarwal