18/EUDC-Maha/LESA T.G./2024-25

Amount

Safe carriage of following material from ESC Daliganj/Chinahut to JE Dump store including loading unloading after proper stacking of material

Line material

ST pole 11/9 Mtr

PCC Pole 8.5 Mtr

11/0.4 25/63/100 KV T/F KVA

11/0.4KV 250/400KVA T/F

11 KV XLPE Cable

33 KV XLPE Cable

LT Cable 1x630/400/240/3.5x240/400mmsq

ACSR Rabbit/dog/Racoon/Weasel conductor

ABC Cable 3x120/95/50/25sqmm

11KV Pilfer resistance metering cubical

11KV Pole mounted CT/PT

33 KV Pole mounted CT/PT

MS Earthing Rod

33 KV Pin Insulator composite.

Safe carriage of following material from JE Dump store to site including loading unloading

11/9/ ST /8.5 Mtr Long PCC Pole

11/0.4 25/63/100 KV T/F KVA

11/0.4KV 250/400KVA T/F

11KV XLPE Cable

33 KV XLPE Cable

LT Cable 1x630/400/240/3.5x240/400mmsq

ACSR Rabbit/dog/Racoon/Weasel conductor

ABC Cable 3x120/95/50/25sqmm

11KV Pilfer resistance metering cubical

11 KV Pole mounted CT/PT

33 KV Pole mounted CT/PT

Fabrication errection of sub station type double pole on ST pole along with fixing of necessary clamp ,accessories required including supply and fixing of MS channel on top dropper with arrangement of fixing of 3 Nos pin insulator as per respo specification

Fabrication errection of 33 KV sub station double pole on ST pole along with fixing of necessary clamp, accessories required including supply and fixing of MS channel on top dropper base angle/channel four mounting of CT/PT as per RESPO Spection.

Errection and grouting of 9/11 mtr long St pole with fixing of necessary items,Such as V-type X-arm,F-bracket,11KV Pin/Dic insulator ,guarding angle with nut and bolt its ramming as per Respo

Prepare proper space for contruction of Plinth

Construction of T/F plinth of size 2x2x1.2 Mtr with first class bricks and massonary work in the ratio 1:4cement and course sand with RCC Top 1:2:2 cement sand and course sand stone gritt with MS bar and MS chaanel for resting of T/F

Fabrication and fixing of wiremesh fenci-ng of 11/0.4KV S/S made as per require-ment 3mtr height 45x45x5 mm angle frame and 1 No horizontal runner by 40x5 mm MS flat then welding of wiremesh on it 50x25mm made of 12 SWG ,diagonal bracing of all the frame panel welded with MS flat 25x3mm support,groutin properly by cement concrete and course sand

Painting of wiremesh Fencing with 2 coat of red oxide and 2 coat of enamel Paint

Fabrication and fixing of DP box stand made of MS Angle ,grouting and plinthing of the same all material provided by contractor

Fabrication and fixing of Metalic Distribution Pillar box on stand with Nut bolt made of 20 SWG BP Sheet with door 18 SWG BP Sheet ,with fixing of 2 Nos MS Angle for mounting of Fuse unit

Fabrication and fixing of Henlay type Tailless Fuse Unit 500 Amp 650 Volts

Fabrication and Fixing of Electrolytic copper Bus bar of Size 50x6x750mm

Fabrication and Fixing of Almunium Bus bar of Size 50x10x750mm

Chemical type earthing by digging of pit fixing of electrod earthing rod filling of Bentonite powder around the rod and water ,connect the GI Strip 32x5 mm with wiremesh fencing and DP Box

Digging of pit errection of 8.5 Mtr Long PCC pole with fixing of neccessory items, such as v-type x –arm,F-bracket, 11KV Pin/Dic insulator guard angle as per Respo, refilling of earth and proper ramming of earth

Providing and fixing of 11KV DO Fuse set alont with clamp and nut bolt

Laying of 11 KV cable3x3570/120/185 sqmm in pukka road by drilling method

Laying of 11 KV cable3 x/3570/120/185 sqmm in pukka road/kucchRoad by digging of trench upto 1 Mtr Deep 0.6 Mtr width laying of cable boxing with bricks and sand ,refilling of earth and proper ramming

Laying of 33 KV cable 3 x/300 sqmm in pukka road/kucchRoad by digging of trench upto 1 Mtr Deep 0.6 Mtr width laying of cable boxing with bricks and sand, refilling of earth and proper ramming

Hoisting of 11KV cable will be passed through GI pipe required size duly clamped with pole at the bottom ,middle and top of the pole all material provided by contractor

Hoisting of 33 KV cable will be passed through GI pipe required size duly clamped with pole at the bottom, middle and top of the pole all material provided by contractor

High pressure testing of 11KV Cable by high pressure equipment

Proper Jumpering of 11KV Cable on tapping point

Laying of LT Cable.

Hoisting of LTcable will be passed through GI pipe required size duly clamped with pole at the bottom ,middle and top of the pole only cable supplied by department

Proper Jumpering with existing LT Line with PVC Cable and Al Lugs

Errection and commissioning of AB Conductor of size 3x120/95/50/25sqmm

Laying stringing and sagging of 3Phase 3 wire 11KV line on ACSR Weasel/Rabbit /Racoon /Dog conductor as per Respo

Ordinary Earthing by MS Earth rod2500 mm long all material provided by department

Grouting binding nozzelling of stay set complete including fixing of necessary clamps accessories stay set and stay wire provided by department

Installation of 11KV CT/PT on double pole connected with metering unit along with providing and fixing of all accessories such as S/S base ,MS Flat ,clamps,nut and bolts,

Proper jumpering of 11KV Incoming and outgoing Cable with Pole Mounted unit

Installation of 33 KV CT/PT on double pole connected with metering unit along with providing and fixing of all accessories clamps,nut and bolts.

Proper jumpering of 33 KV Incoming and outgoing cable with pole mounted unit.

Dragging of pilfer metering cubical inside the metering room its installation and commissioning

Earthing of Pipe type with 60 feet deep boring and providing jindal make pipe "B" class 1" dia and GI strip 25x5 6mtr long attached with clamps and GI pipe .

Safe installation of 11/0.4 25/63/100KV T/F on double pole by providing and fixing of all accessories

Installation and commissioning of 250/400KVA T/F on plinth including its connection in between 11 KV and LT line mounting of copper L-piece 300x65x6mm, providing Alu. Lugs of suitable size (Only T/F provided by deparment).

Fabrication of LT Bus bar and fixing on consumer premises

Fabrication and fixing of 11KV TPMO Set

Fabrication and fixing of HT Cable stand with the help of 65x65x6mm MS angle 3.5 mtr high above ground level and grouting properly

Dismantling of 11KV/LT line from existing pole and disconnect all the cables

Dismantling of of all the fitting from Four Pole

Dismantling of of all the fitting from Double Pole

Dismantling of of all the fitting from Pole

Dismantling of ST/PCC/Rail pole and its carriage back to JE Dump store

Grouting of pole by cement course sand and stone gritt

Painting of ST pole by Al paint and post office red paint

Plinthing of ST Pole by cement stone gritt and course sand

Supply and fixing of 2.5mm Multistrand PVC Copper wire

Cutting of tree Branches for clearance of line

Supply and fixing of 150mm GI pipe.

Supply and fixing of danger board with clamp.

DEEPAK ENGINEERING

A. A. ENGINEERING CO.

Bidder Name

A. A. ENGINEERING CO.

DEEPAK ENGINEERING

M/S SHAIL ELECTRICALS