Construction of Family Court in Vacant Space of Existing Litigant Block in Judicial Courts Complex Khamano disttrict Fatehgarh sahib

Supply, Installation, Testing & Commissioning of 1 KVA UPS with Input power factor correction - 0.99, Output power factor - 0.8, OVCD inbuilt , DC V 36v, Efficiency : Above 90% True onliine double conversion internal bypass LCD status display intelligent battery charging, automatic periodic battery self test, sine wave output serial connectivity Generator compatiable with wide input voltage range ,output voltage regulation ,frequency regulation etc with SMF VRLA UPS battery 12 V 26 AH 2 Nos ensures long life suitable for charging 12 volt DC power backup with suitable mettalic battery rack & UL listed battery interlinks including petty material required during installation,including connection & testing charges etc.complete in all respects as approved and desired by the Engineer in-charge at site.

Dismantling of brick work in cement sand mortar / lime mortar including T&P scaffolding wherever necessary, sorting the dismantle material, disposal of unserviceable material. & staking the serviceable material with all lifts & lead of 100 metre (By Mechanical Means)

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth

40 mm thick cement plaster D.P.C. 1:3 with admixture of water proofing compound @ 1 Kg/ Bag of cement.

First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level.

Providing and fixing face Tiles 230 x 38 x18 mm machine made vibro hydraulic compacted Burnt Clay brick Tile silicon coated on one side(Colour Terracotta series) on wall with under layer of 12 mm thick cement plaster 1:3 and jointed with neat cement matched with pigment complete as per drawings, specifications and to the entire satisfaction of engineerin- charge.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

RECESSED TV, TELEPHONE & NETWORKING SOCKETS OUTLET POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): Supply and erection of TV socket, Telephone socket and Networking socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module), covered with Frame Plate and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-Supply and erection of TV socket, Telephone socket and Networking socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module), covered with Frame Plate and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring Telephone socket point RJ11 (one module)

20mm thick cement plaster 1:5 in two coat work

Preparation of plastered surfaces or concrete surface for painting(including sand papering the surface) using Acrylic wall putty by applying two or more coats to get required finish including priming coat to make an even surface before applying Acrylic wall putty on new plastered surface.Complete as per specifications

Distempering with acrylic washable oil bound distemper(of approved manufacture) two coats over one priming coat to give an even shade.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade

Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete Doors and windows frame of size 161mm x 60mm with 40 mm wide double rebate weighing 4.05 kg per meter.

Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. Triple Layer Tanks 3 no x 1000 ltr = 3000 ltr

Deodar wood doors shutter windows shutter including hinges, screw and cords etc. Complete fixed in position. Battened and framed. 50mm thick.

Deodar wood doors shutter windows shutter including hinges, screw and cords etc. Complete fixed in position. Panelled,glazed or glazed and panelled. (30mm thick)

Melamine polish two or more coats to give required finish including one coat of wood filler

Cost of aluminium fittings complete for doors, windows such as tower bolts,handles,stoppers and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm

Cement concrete 1:4:8 with stone ballast 20 mm gauge

Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) size 600 mmx600 mm

Providing and fixing mineral fibre false ceiling tiles at height upto 4 meter of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size 24x 24X 3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. With 16 mm thick beveled tegular mineral fibre Anti-microbial false ceiling tile confirming to ISO 5 (class 100) specifications

Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position

Chil wood wrought planed and fixed in position (3''x3'' supporting members)

Providing and fixing commercial plywood 12mm thick

Providing and fixing commercial plywood 18mm thick

Providing and fixing ply wood, plain lining, butt jointed including PVC Plug placed at 45 cm to 65 cm centers complete with necessary nails (Frame work shall be payable extra)

Providing and fixing teak wood beading to door windows chowkats with iron screws fixed in position complete as per design and shape required 50x12mm

Teak wood wrought planed and fixed in position

Polyurethane Polish(PU) two or more coats to give required finish including two coat of wood sealer including Preparation of surface/base complete as per specification

Spirit polishing two coats including a coat of wood filler on wood work

Dismantling cement conglomerate floors 25mm to 50mm thick without concrete base

Cutting of floor topping of concrete / Kota Stone / any kind of marble/ tile floor depth up to 50mm with the help of mechanical cutter and chisel (with due care so that surrounding floor should not be damage) to lay the tactile flooring 300mm wide including cost of providing and laying 25mm to 28mm thick cement concrete 1:2:4 as per requirement complete as per specification, Harmonised guidelines for PwD and as desired by Engineer-in-charge.

Providing and Laying Tactile Flooring full body vitrified , low water absorption below 5%, having excellent slip resistance , very dense, durable and abrasion resistant, solid through colour, fade proof, highly chemical and stain resistance unglazed finish porcelain tile of size 300mm x 300mm x 10mm + 5mm thick, approved profile design, Tec-button/Tec-liner laid in ordinary grey cement and on 20mm thick bed of cement mortar 1:3 filling neat cement slurry between joints with White Cement containing pigment to match the shade complete in all respect. (Tile design and pattern will be as per guidelines issued for persons with disability)

Providing and Installation of Safety signage as per guideline for person with disability made of retro reflective sheeting as per colour specified and writing matter will be of same material in white fixed / pasted over 4mm thick aluminum composite sheet, including cost of writing matter with braille also firmly fixed on wall with nylon fastener, brass screw and washer complete as per specification and as desired by engineer in charge.

Supply, Installation, Testing and Commissioning of Wall Mounted rack network rack 12U 500d, with heavy duty exturded aluminium frame for rigidity, fan 90CFM 230V AC, cable manager 1U MS with loops shelf, PDU 6 sockets 5amp with MCB mounting hardware (packet of 20) complete in all respects as approved and desired by the Engineer in-charge at site.

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-inCharge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beadingh Ampere Meter, Yolt Meter & 3 core wire of 1 1/2 meter length complete in all respect.

Exaust fan

M.S. Holder bats clamps for 75mm i/d H.C.I. pipes

Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.

Air conditioners Providing & installing 5 star Inverter split type Air Conditioners make Hitachi/ Carrier/Daikin/Mitsubishi or any other equivalent make remote control fitted with rotary compressor operating on latest eco-friendly refrigrant suitable wall mounting as per site requirement and approval of Engineer-in-charge including stand of compressor unit, including Labour/ Installation Charges complete in all respect. 1.00 Ton capacity

1.50 Ton capacity

2.00 Ton capacity

AUTOMATIC VOLTAGE STABLIZER: Supply and erection of Single phase copper wound Automatic voltage stablizer of suitable capacity electronically controlled circuit with input voltage 140-260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having main silicon core copper wound step up transformer with suitable nos. of turnson primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable size. There should be power control relay and single pole MCB (C-curve, 10kA) of suitable capacity complete with internal copper wiring along with amp. meter and volt meter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided:-

Automatic Voltage Stablizer 4 KVA

Automatic Voltage Stablizer 5 KVA

Providing and fixing refrigerant copper pipe with insulation and vinyl tape of suitable size as per tonnage complete in all respects.

Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 2.5sq.mm (50/0.25mm), 3Core

Providing and fixing Drain Pipe of required at site as per site condition

Cutting chase in brick walls in cement or in floor for embeddding G.I. or C.I pipes line and making good the same to its original conditions size 150 mm x 150 mm

Water Cooler (Ground Floor & First Floor) Providing & fixing in position Water Cooler without Stablizer of approved make (to the approval of Engineer-in-charge ) including carriage complete in all respect.Water Cooler Full Steel Body 150/150 ltr without Stablizer

AUTOMATIC VOLTAGE STABLIZER: Supply and erection of Single phase copper wound Automatic voltage stablizer of suitable capacity electronically controlled circuit with input voltage 140-260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having main silicon core copper wound step up transformer with suitable nos. of turnson primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable size. There should be power control relay and single pole MCB (C-curve, 10kA) of suitable capacity complete with internal copper wiring along with amp. meter and volt meter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided:-Automatic Voltage Stablizer 4 KVA

Providing and placing plastic pedestal for the water cooler complete as per satisfaction of the EIC

Providing & fixing in position Commercial RO without reservoir with four no cartridge/ membrane having flow rate 50 ltr/hr with 6 stage purification process of approved make (to the approval of Engineer-in-charge ) including carriage and fixing in position complete in all respect.

Providing & fixing in position UV filter having flow rate 200 ltr/hr with 3 stage purification process having 16 watt UV lamp and 35 Watt power rating of approved make (to the approval of Engineer-in-charge ) including carriage and fixing in position complete in all respect.

Fire Fighting MS PIPE Providing, laying, fixing, testing and commissioning of 'C' Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall / ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete in all respects.100mm

Hydrant landing Valve S/I/T/C of GM single headed hydrant valve with instantaneous Gun metal peet coupling of 63mm dia with cast iron wheel ISI marked conforming to IS 5290 with blank gunmetal cap and chain including orifice olate made of 6mm stainless steel to keep the pressure not more than 3.5 per sqcm at any point complete in all respects.

Branch Pipe S/I/T/C 63mm dia gun-metal branch pipe ISI marked with 20mm size gun metal nozzle confirming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required.

Fire Brigade Inlet Fire Brigade Inlet Providing and fixing fire brigade inlet connection of cast iron body with gun metal 63mm dia instantaneous type male coupling with built in check valves and 150 mm dia flanged outlet complete with bolts, nuts and rubber insertions as per IS:904. Two way inlet connection

RRL Hose Pipe S/I/T/C of RRL fire hose type A IS:636, 63mm diax15m long with gunmetal male and female couplings bound and riveted to hose pipes with copper rivets and copper wire as required.

First-Aid Hose ReelS/I/T/C of First-Aid Hose Reel with MS construction spray painted in Post office Red, conforming to IS 884 with upto date amendments, complete with rubber hose pipe (IS:444/1987) 20mm dia 30 mtr long type with main pipe complete in all respect.

Pressure Switch Providing fixing testing & Pressure Switch in the M.S. Pipe Line including connection etc. as required.

Providing & fixing in position UV filter having flow rate 200 ltr/hr with 3 stage purification process having 16 watt UV lamp and 35 Watt power rating of approved make (to the approval of Engineer-in-charge ) including carriage and fixing in position complete in all respect.

Pressure Guage providing and fixing of Pressure Guage in M.S Pipe Line (pressure range 0-10 Kg/cm2) suitable. Dia diameter 150mm calibration 0-16kg.

Butterfly Valve Supply, laying, Testing and Commissioning of ISI marked Butter Fly Valve tested for minimum Pressure of 16 kg/cm complete with rubber insertion, nuts bolts and washers, matching Flanges of required Thickness etc. complete as per specification 100mm

Non-Return Valve NON RETURN VALVE-providing & fixing dual plate check valve flanged end class PN-1.6 as per IS with nitrile seat SS shaft & springs in pipe lines including jointing & cost of Nut bolt, rubber insertion etc. complete. 100mm

Cable Supply, laying and erection of aluminium conuctor XLPE insulated PVC sheakthed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid 1 mtr below ground level including excavation, sand cushioning, covering with sand and first class bricks and back filling the trench etc., of the required size as per PWD General specifications; 16sq.mm (4core) armoured

MS Box S/I/T/C of weather proof cabinet for hose box fabricated out of 1.6mm thickness M.S sheet with front glass door having ocking arrangement, suitable to accommodate all the necessary pipes, accessories, fittings etc including painting the metal portion with one coat of ready mixed primer paint and two coats of synthetic enamel paint of approved shade and quality, sign writing etc. 600mm wide x 600mm high x 300mm deep size (inner)

Terrace Pump Providing and fixing of Kirloskar make pump in back pull out design having 50 mm suction, 32 mm delivery, CI casing, bronze impeller and CS shaft with gland packing arrangement on common baseplate to Kirloskar or equivalent make, 2900 RPM TEFC sq. cage induction motor suitable for 3phase, 415V, 50 Hz AC supply confirming to through suitable flexible coupling. The pump set is suitable for following duties: 450LPM at 40 mtr head. (including foundation)

Hydrant Panel Providing and fixing of Electrical Control Panel of cubical Type floor Mounted having MCB 50A 3P 10KA, Contractors MNX 32a, Relay 14-23-A, Add on block 2No+2NC, SP MCB 6, SPPR Relay 415V AC Digital Meter Set, Hardware, Aluminium Bus Bar Set, Wire and Thimble, Complete in all respect.

GM Ball Valve Providing, fixing and joining Brass Ball valves screwed with SS/BRASS ball and spindle and Teflon seats, on G.I. Pipe lines including all carriages complete. 25mm

Fire Extinguisher ABC 4 Kg providing and fixing of fire extinguisher ABC type of 4kg capacity

Fire Extinguisher CO24.5 kg providing and fixing of fire extinguisher Co2 type of 4.5kg capacity

Water Tank providing and fixing in positionon terrace HDPE water storage tanks of apporoved make with cover with suitable locking arranment and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank

Foundation work for PVC Tank Capacity 5000 Ltr. On Tarrace Level.

Lifting of Water Tank At tarrace Level

Core Cutting from 100mm dia to 150mm dia

Electrical Work

Supply, Installation and Comissioning of CAT 6 24 port punchdown panelshall be terminate 4 pair , 22/26 AWG,100ohm unshielded twisted pair cable. complete in all respect as per satisfaction of the Engineer in charge of the work.

RECESSED AIR CONDITIONER SUPPLY TERMINAL POINT (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): Wiring air conditioner supply terminal point recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2Module), covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (wi

th finishing the surface):- Wiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height.

RECESSED COMPUTER SUPPLY TERMINAL POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): Wiring Computer supply terminal points recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10/16/20Amp. Switches and blanking plate etc., and covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-Wiring Computer terminal point having 3 Nos. 6Amp. 2/3 universal socket (shuttered), 1No. 16 Amp. switch with indicator and 1No. blanking plate (Modular accessories).

Wiring Networking socket point RJ45 (one module)

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-Wiring fan point (Without fan box)

Wiring light point

Wiring call-bell point

Wiring 6Amp. wall socket point

Wiring 6Amp. Plug control comprising wall socket point

Wiring 16/20Amp. power plug control point

PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 1.5sq.mm (Un-sheathed)

Overall size 2.5sq.mm (Un-sheathed)

Overall size 4sq.mm (Un-sheathed)

Copper Conductor Cables for Special Repair Electrical Services: Supply and erection of CAT 6 with 23AWG solid bare copper conductor,special grade PE insulation with star separator,4 Pair unshielded Twisted pair(UTP) industrial cable, FR PVC sheathed, Class-E,250 Mhz of Bandwidth, supporting data transfer speeds of upto 10Gbps(10GBASE-T) for distances upto approximately 180 feet, cables are manufactured and tested to meet the ANSI/TIA 568-C 2 And ISO/IEC 11801 class E standards left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge CAT 6 LAN cable

Supply and erection of telephone cable with solid bare copper conductor, special grade PE insulation, paired,polyster taped, nylon cord, FR pVC sheathed, conforming to TEC specification no. G/WIR-06/03 left bare in pipe or casing of suitable size complete in all respect as desired by Engineer-in-charge Telephone Cable 0.5 Sq mm, 2 Pair

XLPE INSULATED UN-ARMOURED CABLES (LOOSE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- Overall size 35sq.mm (3½ Core) Un- armoured (Loose)

PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- Heavy Gauge PVC Conduit Pipe 25mm dia. (On Surface)

Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)

Supply and erection of PVC flexible pipe complete without compression glands, locking arrangement, check-nuts as required:- PVC Flexible Pipe 20mm dia.

COPPER EARTHING: 8 SWG COPPER EARTHING : Earthing with 8 SWG (4mm dia.) electrolytic copper wire thimbled (1No. copper thimble with suitable size steel bolt, washers & double nut) with 30cm x 60cm x 2mm thick copper plate (made cylindrical) burried below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) recessed in wall and in floor etc., up to suitable Length in metre (including bore Length). G.I. pipe 20mm dia. (A-class) of suitable Length should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:- Earthing with 8 SWG (4mm dia.) copper wire thimbled with 30cm x 60cm x 2mm thick copper plate burried 10.50 metre (34.44 feet) below ground level (up to 14metre in Length) with G.I. pipe 20mm dia. (A-class), 9metre long

BONDING TO EARTH WITH COPPER WIRE: Bonding to existing earth with copper wire in heavy gauge (1.6mm thick) welded conduit pipe with bends, junction boxes, steel hooks and MS saddle clamps including painting etc.:- Bonding with copper wire 8S.W.G. (4mm dia) in HGW conduit pipe 20mm dia. (on surface)

UPPLY AND ERECTION OF WIRING ACCESSORIES: Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.,:- Call Bell 220/230 volts AC Ding Dong

MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- MCB Single Pole 6-32amp. (10kA, Curve-C)

MCB Four Pole 50, 63amp. (10kA, Curve-C)

SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's: Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color- coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- TP&N Horizontal Double Door Distribution Board 4 way each

TP&N Horizontal Double Door Distribution Board 6 way each

MCCB's (FOR PANELS & SHEET ENCLOSU

RE): Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader terminal links, Extended rotary handle and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:- MCCB Four Pole 160amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting

MCCB's (MOULDED CASE CIRCUIT BREAKER): Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader links and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:- MCCB Four Pole 63/80/100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting

MS SHEET ENCLOSURE FOR MCCB's: Supply & Erection of indoor type MCCB enclosure of suitable size having provision for MCCB with extended rotary handle. The Enclosure shall be made from 14/16 SWG CRCA sheet, confirming to IS 8623/1977-82. The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The Enclosure door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. The Enclosure will be wall mounting type having provision for cable entry from bottom/top with cable glands etc. The sheet metal is sprayed with corrosion resistant etch primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work:- MS Sheet Enclosure having provision for MCCB 40-160Amp.with extended rotary handle (Approx. Size 500mm x 300mm x 200mm)

Supply and erection of Recessed Mounted 36 Watt LED 2x2 panel (including constant LED driver) with CRCA sheet having efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD <10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including there drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited labortary.

Supply and erection of LED batten 20 Watt LED (including constant LED driver) with High quality extruded aluminium with efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD <10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including there drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No: AT/2021/GL/1410-1422, Dated: 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory.

Supply and erection of 3-Star rating AC Ceiling Fan 1200mm (48") suitable for 230 V single phase with double ball bearing, copper wound, full aluminium body, 3Nos. of blades, white in colour. The mounting type is down rod mount. The product should possess a minimum air deleivery of 218 CMM. The rated speed of the the product must be minimum of 350 revolutions per minute and 5Nos. of speeds. The approximate weight of the product should be 4Kg and 180gms.(without packing) or higher. The product should have a manufcaturer's guarantee /warranty of minimum 2 years. The product should be complete in all aspects with fan motor, bladeset, down rod, conopy set, shackle kit, twisted wire etc., including erection & testing of ceiling fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75 sq. mm complete in all respects as per satisfcation of the Engineer in-charge at site.

Supply and erection of Plastic Body 250MM, 10" Ventilation Fan including flexible wire & petty material etc. forconnections and testing complete in all respect as approved and desired by the Engineer in-charges at site.

Providing PA System along with allied accessories: Single zone desktop paging microphone with a sturdy , aluminium die- cast top and special high reiability switches with intergarded LED indicators . Fitted with a flexible 300mm (12") gooseneck and a high quality unidirectional dynamic cartidge .supplied with 6mtrs. twin core sheilded low noise cable with 6.3mm (1/4") phon plug . frequency response 50-10000hz sensitivity 2.0mv /pa imepdence 600 ohms complete in al resects as approved and desired by the engineer in charges at site

supply , installation, testing & commissioning of 60 watt pa mixer amplifier , 4x mic & 1 aux inputs , pre amplifier output for connecting to a booster amplifier and for recording the programme,instand transfer to dc power if ac power fails, cut typr bass and treble controls , 90watt mx , 65 watt rms at 10% thd , 60watt at 5% thd , < 2db , no load to full load at 1khz , 4x mic 0.65mv/4.7kohms , 1x aux 100mv /470ohms , 50-15000hz-/+3db, signal to noise ratio 60db, bass :-10db at 100hz , treble :-10 at 10khz,preamp 200mv/600ohms ,4,8,16ohms and 100v , ac 220-24050/60hz , dc 12v car battery , ac : 160va dc 3a, dimensions:- W 350xH120xD265mm, weight : 7.00kg

Supply , insttallation, testing & commissioning of Slim, compact , aesthetically designed column speakers. Off-white colour to integrated with most interiors. Aluminium extruded cabinet with moulded plastic c

Supply, Installation, Testing and Comissioning of Wall Mount 9U x 600 W x 600 D , Front Glass Door (tinted, Toughened) with Lock & Key, 2 pairs of 19" Mounting Rails with U-Marking , Welded Side Walls, Min Accessories : 1U Cable Manager (1), Hardware Packet (1 Pkt), 6 Socket 5 Amp. Power Distribution Unit (1 No), Roof Mounted Fan Unit / 90 CFM /230V AC. as per DIN 41494 Standards.

Providing EPABX System: Supply Installation Testing Commissioning of Analog phone with caller id and hand free facility

Providing Networking System along with allied accessories: Supply, Installation and Comissioning of 24 port POE 1 GbE L2+switch with 4X1GbE SFP (upgradeable to 10 GbE) uplink ports complete in all respects to the entire satisfication of the Engineer Incharge