REPAIR TO ROAD FURNITURE AND ROAD UNDER AGE BR I AT AMRITSAR CANTT

Scarifying or picking gravelled macadam or bituminous macadam surfaces in area exc 400 Sqm and depth exc 50mm deep but not exc 100mm deep complete, all as specified and directed.

Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags/air compressor to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer @ 5 kg per 10 Sqm and laying bituminous premix Semi dense asphaltic concrete 30 mm thick (minimum consolidated thickness) with 5.5% binder content by weight of total mix, rolled and compacted with 8 to 10 Tonne power road roller to required gradient and camber complete, all as specified and directed. Note :- (a) Material for SDAC shall be mixed in hot mixing plant. (b) Mix design of bituminous SDAC will be got done from approved lab. (c) The premix carpet shall be laid with mechanical mixer as specified in clause 20A 27 of MES SSR Part-I and the spreading of premix carpet shall be done by machanical sensor paver.

Material and labour for premix bituminous macadam laid, rolled with 8 to 10 tonne power road roller and compacted to required gradient and camber, (consolidated thickness upto 75mm or less) using paving bitumen any penetration @ 4% of weight of road metal, grading-2 (63mm to 40mm) in existing sunken portion of the road surface including sweeping from dust or mud or water, scoring sunken surfaces in road etc cutting edges complete, all as specified and directed.

Material and Labour for repair to pot holes not exceeding 1 sqm each including sweeping free from dust or mud or water scoring sunken surfaces in road, path etc cutting around edges to at least 25 mm in depth and making good the surfaces by applying a priming/tack coat with bituminous primer @ 5 Kg per ten square metres and putting in premixed carpet 2 cm thick well rammed and sealed with premixed sand seal coat (6.8 kg of binder with 0.06 cum of sand) again well rammed to match/join the existing road surface,depth of patholes not exceeding 30 mm complete, all as specified and directed.

Material and Labour for marking lines dashes, arrows, letters etc on road, pavement and the like of any width using thermoplastic compound white / yellow paint, conforming to BIS 3262, and according to the specification laid down in IRC & MORTH (5th revision), 2.5 mm thick, hot applied with thermoplastic road marking machine including material and spreading glass beads through spreader attached with the machine complete, all as specified and directed.

Material and Labour for preparation of old decorated brick/concrete plastered/ unplastered surfaces incuding scrapping of treatment of walls/pillars, cornices/ stone curbs etc.and applying one coat of Synthetic enamel paint over a coat of primer of any description over 10 cm girth or width, not otherwise described complete, all as specified and directed.

.Material and Labour for preparation of new decorated brick/concrete plastered/ unplastered surfaces incuding scrapping of new treatment of walls/pillars, cornices/ stone curbs etc.and applying two coats of Synthetic enamel paint over a coat of primer of any description over 10 cm girth or width, not otherwise described complete, all as specified and directed.

Supply and fixing in repair solar stud size 125 x 125 x25 mm made from alunimium ally and PC construction solar powered by mono crystal solar panel. Type of battery one high capacity No cd rechargable battery view distance approximate 1000 mtr LEDs 10 mm, 3 pieces each side and piece are used for high brightness of red colours back up 12 hours of continuous lighting at night mounted on concrete or muddy ground water proof and harness tested Model DA 110 of DARK EYE or equivalent of make as specified in Appx complete, all as specified and directed.

Demolition of cement contcrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Material and labour 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor etc.complete all as specified and directed.

Material and labour 25mm thick cement contrete type BO, 1:2:4 (12.5mm graded stone aggregate) as in floor etc.complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement contcrete in position to the required line, level and curvature, joined with cement mortor 1:3 (1 cement : coarse sand), including making joints with or without grooves (thickness of joints excepts at shape curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and directed.

Dismantling interlocking paver block tiles and refixing the same over and including 50mm thick compacted bed of fine sand, complete, all as specified and directed.

Supply and fixing of delineator DA 952 with plate size of plate is 200x80mm on two sides with reflective signs fixed on MS pipe of 50mm duly powder coated, anty-rust & anty theft steel net Size-700x80x200mm complet all as specfied and directed.

Material and labour for providing and fixing stainless steel (Garde 304) railing/frame work made of hollow tubes, channels, plates etc., including welding, grindiong, buffing polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, It is installed with PCC 1:2:4 of 400mmx400mm x 600mm including excavation with suitable arrangement complete all as specfied and directed.

Supply and fixing printed green/blue retro reflective sheet 0.7mm thick back to back over 3mm ACP sheet (Aluminium composite panel) designed to reflect light back towards it source, fixed on existing/new SS sign board with required SS nut bolt/rivets complete all as specified and directed.

Supply and fixing of yellow colour 110x120x24mm ABS plastic dynamically design having high impact strength, high density and fixed with nails and adhesive of size (model No A 972 of Dark eye) complete all as specified and directed.

Supply and fixing of road stud DA 798 (P) (100x19mm) body of stud made of ABS material two reflectors are fitted in the body. The road stud is dynamically designed load up to 25 tons and its impact strength is about 253 KN. Weight of stud is 130 gms. colour : Red/white/yellow with swareflex beads complete all as specified and directed.

Supply and fixing of speed breaker DA 1001 of size 425x75x500mm. The body of the speed breaker is made of ABS material. Two highly reflective relectors moulded in PMMA material are welded with ABS plate through ultrasonic welding process and then fixed on two speed breaker with reflector on both sides including black and yellow colour with all arrangement of fixing complete all as specfied and directed.

Providing and laying 60mm thick factory made chamfered adge cement concrete paver block of M-35 grade with approved colour, design & pattren as in foothpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Material and labour chequered cement concrete tiles 30cm x 30cm x 25mm thick, set jointed and pointed in neat cemnt slurry in floor with pigment over 20mm thick sceed in CM 1:6 complete all as specified and directed.

Supply and fixing in repair PVC (SWR) pipes single 110mm socketed, in any length with rubber ring joints, laid in trenches or in floors/wall complete all specified and directed.

Dismantling wrougth iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Supply and fixing of rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St-240 complete all as specified and directed.

Supply and fixing of dframed work such as grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to FE-290. Gde-E-165 complete all as specified and directed.

Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 MPA as in roof covering, fixed with self tapping screws including dismantling of asbestos(corrugated/smicorrugated etc.) cement sheets in roof coverings etccomplet all as specified and directed.