PROVN OF SHED (FSP) AT BRAVO DISPESAL AT AF STN SURATGARH

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering making good surface complete all as specified.

M&L for PCC(1:2:4) type B2 (40mm graded stone aggregate) filling in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) and other similar work complete all as specified.

S&F mild steel for framed structure like trussed, purlins, crane gantries, post rails and fastenings and heavy bracket framming (Beam, Tee, Angle, Channels, Tube, flate sections) including distance pieces, cleats etc conforming to Fe410-W (Gde-E-250) quality-A all as specified and directed by Engr-in- charge.

S&F mild steel screwas bolt (Machine made) with hexagonal or square heads one end screwed, each screwed end have two washer and one nut, dia of shank 11mm-15mm and length of bolt exc 5 cm and n exc 10 cm. all as specified and directed by Engr-in-charge.

S&F for mild steel as in Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed. drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth not otherwise described by applying two coats synthetic enamel paint over a coat or red oxide zinc chrome primer complete all as specified and directed

M & L for preparation of new steel surfaces of any description n.exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr. in-charge.

Removing excavated material n exc 50mtr and depositing where directed at a level not exc 1.5 mtr above the starting point in soils.

Point wiring with 2.5 Sqmm (Nominal area) in stove enamelled steel conduit insulated unsheathed multistranded copper copper conductor cable in and including stove enamelled steel conduit 20 mm dia medium grade ISI marked including fittings and accessories with continous stove enamelled steel conduit insulated copper cable with copper conductor of same size as in phase/neutral/earth cable connecting to common earth dolly including (enamelled steel conduit box of suitable size with laminated sheet cover of 3 mm thick for mounting switches, socket, regulator) complete.

One light point controlled by one switch 16A

Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V

Supply and fixing LED light fitting 2x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.

Supply and fix FLP/WP switch/Isolator 16 Amp double Pole ON/OFF

Supply and fix FLP/WP switch/Isolator 10 Amp single pole ON/OFF

S&F Flame proof Whether proof MCB DB SPN 4 way double door, IP 42, CRCA sheet powder coated factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables & blaking plate as required .

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 2 core

Excavation in trenches not exc 1.5 m wide and not exceeding 1.5 m depth for foundation laying of cables etc and getting out in soft loose soil all as specified and directed.

Returning filling including spreading leveling watering and well ramming in layers n.exc 25 cm in soil completed all as specified and directed

Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 mtr above the starting point as in soil complete all as specified and directed

M&L Fazilka sand as in sand cushioning to under ground cable including punning down all as directed

M&L for brick protection cover of UG cable by old size bricks common burnt clay building bricks sub class `B’ laid dry and flat abutting each other with width equal to length of brick and gap between adjacent brick not exceeding 10mm complete all as specified and directed

Supply and fix GI tubing 40 mm bore light grade galavanised with all fitting complete for cable protection under road crossing/on pole/wall or similar position all as specified and directed by Engr-in-charge

Make bore to road width for providing GI pipe medium grade both end socketed for passing armoured cable complete all as specified.

Air termination, single pointed, copper rod 12mm dia and 300mm long

Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw

Supply and fixing Earth continuity conductor aluminium strip of size 25 x3 mm or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed Test Terminal or any other indicated situation for loop earthing etc.complete all as specified.

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron strip 32×6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion

M/s Tiwari & Sons

M/S VISHNU ENTERPRISES

AK CONSTRUCTION

m/s krishna builders