Loading…
Loading…
Tender Value
₹1.9 Cr
EMD Value
₹1.9 L
Closing Date
30 Jun 2026, 4:40 pm
Similar tender results from the same govt authority in the past 3 years.
Chief Engineer, HMDA
7th floor, East Wing, Swarnajayanthi Commerical Complex, Ameerpet-500038
Development of Blue Cross Building in an extent of 2.00 acres in Sy No.333/P and 348/P of Qutubullapur (V) and (M), Medchal Malkajgiri District-Construction of Certain Balance Civil Works and Providing Electrification and Plumbing Works for Blue Cross Building
708502
HMDA/DEV/CE/07/07/2026-27, Date: 04.06.2026
OPEN
Civil Works
MEDCHAL-MALKAJGIRI
1 document required · 1 mandatory
₹6,860
₹1.9 L
16 Jun 2026
16 Jun 2026
16 Jun 2026
Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves (SS 901,903 & 904) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Providing Admin lock
Plastering with 12mm thick in single coat in CM (1:4) finished smooth (As per SS 903) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Stilt/Ground Floor. For Providing Admin lock
Plastering with 12mm thick in single coat in CM (1:4) finished smooth (As per SS 903) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For First Floor. For Providing Admin lock
Plastering with 12mm thick in single coat in CM (1:4) finished smooth (As per SS 903) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Second Floor. For Providing Admin lock
Plastering with 12mm thick in single coat in CM (1:4) finished smooth including cutting grooves where ever necessary etc., (As per SS 903) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Head Room. For Providing Admin lock
Supply & application of one coat of based cement primer of exterior grade II and two coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/litre for Painting to new walls of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site as per SS 911 for external walls including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Providing Admin lock
Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials as per SS 911 for Internal walls including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Providing Admin lock
Providing and fixing false ceiling consisting of 600mmX600mm, Solid PVC insulation panels having wall thickness of 1mm thick plain PVC rigid foam sheet and EPS as defined in of desired thickness depending on insulation required shall be insert in a frame work made using anodized aluminium Tee section of sizes 1”X1” (25X25mm, 19 gauge or 1mm thick) in square pattern of grid sizes of 2’X2’ (600X600mm). The aluminium framework is supported from the ceiling with the help of G.I. hook and G.I. wire/6mm.M.S. rods of required sizes to maintain proper level etc. the aluminium framework is supported on side wall with the use of aluminium 1”X1” (25X25mm) angles including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Providing Admin lock
Flooring with 16 to 18mm thick high polished granite stone slabs other than black and regular colors with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over a base coat of cement mortar (1:8), 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey-like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with the pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand, water, granite slabs, etc., to work site and all operational, incidental labor & lift charges, polishing charges. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Providing Admin lock
Flooring with double charged Matt Full Body vitrified tiles of size 600 x 1200 mm and thickness between 8-10 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of Specific colour and finish in all shades and designs , set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc.,including cost and conveyance of all materials like cement, screened sand, water and tiles etc.,including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Providing Admin lock
Flooring with double charged Matt Full Body vitrified tiles of size 600 x 1200 mm and thickness between 8-10 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of Specific colour and finish in all shades and designs , set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Providing Admin lock
Flooring with non-skid full-body ceramic floor tiles of size 600mm x 600mm and thickness between 8-10mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Part 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over a base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey-like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with the pigment of matching shade, including cost and conveyance of all materials like cement, screened sand, water and tiles etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge.For First Floor. For Providing Admin lock
Flooring with non-skid full-body ceramic floor tiles of size 600mm x 600mm and thickness between 8-10mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Part 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over a base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey-like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with the pigment of matching shade, including cost and conveyance of all materials like cement, screened sand, water and tiles etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Second Floor. For Providing Admin lock
Dadooing to walls with glazed red or white full body ceramic wall tiles of 200 x 300 mm / 245 mm x 325 mm size and of 6 to 8 mm thick set over a base coat of CM(1:3) Prop. 12mm thick and neat Gray cement slurry of Honey like consistancy sread at the rate of 3.30 Kg of cement per One Square Meter and jointed wiyh neat White cement paste mixed with pigmant of matching shade including cost and conveyance of all materials like cement, sand, water, flooring Tiles etc. (for toilets) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Providing Admin lock
Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) Fixed Glazing/ Window duly manufactured using UPVC reinforced profiles of 60 mm x 60 mm x 2.60 mm for frames and the mullion sections are of 60 mm x 82 mm x 2.60 mm frames are structurally reinforced with hot dip galvanized up to 50 microns of size 35 mm x 28 mm of thickness 1.5 mm the sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with EPDM weathering seal resistant and glazing bead 34.5 mm x 18 mm including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing including all labour charges, cost and conveyance of all materials to site including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Providing Admin lock
Supplying and fixing of 28/30 mm thick Wood Plastic Composite (WPC) Door shutter, comprising of 70% virgin polymer, 15% wood powder (fibre), and the remaining 15% additives, comprising of virgin PVC polymer of K value 5860 (Suspension grade), Calcium carbonate and natural fibres (wood powder) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum door density of 650 kg/cum, screw withdrawal strength 1800N (Face) & 900N (Edge), Modulus of Elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws all (SS butt hinges and SS screws shall be paid separately)including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Providing Admin lock
Plastering with 12mm thick in single coat in CM (1:4) finished smooth including cutting grooves where ever necessary etc., (As per SS 903) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Stilt/Ground Floor. For Providing Staff quarters
Plastering with 12mm thick in single coat in CM (1:4) finished smooth including cutting grooves where ever necessary etc., (As per SS 903) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For First Floor. For Providing Staff quarters
Supply & application of one coat of based cement primer of exterior grade II and two coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/litre for Painting to new walls of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials as per SS 911 for external walls including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Providing Staff quarters
Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials as per SS 911 for Internal walls including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Providing Staff quarters
Providing and fixing false ceiling consisting of 600mmX600mm, Solid PVC insulation panels having wall thickness of 1mm thick plain PVC rigid foam sheet and EPS as defined in of desired thickness depending on insulation required shall be insert in a frame work made using anodized aluminium Tee section of sizes 1”X1” (25X25mm, 19 gauge or 1mm thick) in square pattern of grid sizes of 2’X2’ (600X600mm). The aluminium framework is supported from the ceiling with the help of G.I. hook and G.I. wire/6mm.M.S. rods of required sizes to maintain proper level etc. the aluminium framework is supported on side wall with the use of aluminium 1”X1” (25X25mm) angles including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Providing Staff quarters
Flooring with 16 to 18mm thick high polished granite stone slabs other than black and regular colors with borders and design as per the pattern approved of length not less than 2.43 mts set over a base coat of cement mortar (1:8), 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey-like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with the pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand, water, granite slabs, etc., to work site and all operational, incidental labor & lift charges, polishing charges cost of base coat including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Providing Staff quarters
Flooring with double charged Matt Full Body vitrified tiles of size 600 x 1200 mm and thickness between 8-10 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of Specific colour and finish in all shades and designs , set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For First Floor. For Providing Staff quarters
Flooring with double charged Matt Full Body vitrified tiles of size 600 x 1200 mm and thickness between 8-10 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of Specific colour and finish in all shades and designs , set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Second Floor. For Providing Staff quarters
Flooring with non-skid full-body ceramic floor tiles of size 600mm x 600mm and thickness between 8-10mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Part 1 to 15) of any colour and finish in all shades and designs, set over a base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey-like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with the pigment of matching shade, including cost and conveyance of all materials like cement, screened sand, water and tiles etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Ground Floor. For Providing Staff quarters
Flooring with non-skid full-body ceramic floor tiles of size 600mm x 600mm and thickness between 8-10mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Part 1 to 15) of any colour and finish in all shades and designs, set over a base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey-like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with the pigment of matching shade, including cost and conveyance of all materials like cement, screened sand, water and tiles etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For First Floor. For Providing Staff quarters
Dadooing to walls with glazed red or white full body ceramic wall tiles of 200 x 300 mm / 245 mm x 325 mm size and of 6 to 8 mm thick set over a base coat of CM(1:3) Prop. 12mm thick and neat Gray cement slurry of Honey like consistancy sread at the rate of 3.30 Kg of cement per One Square Meter and jointed wiyh neat White cement paste mixed with pigmant of matching shade all materials like cement, sand, water, flooring Tiles etc. (for toilets)including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Providing Staff quarters
Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) Fixed Glazing/ Window duly manufactured using UPVC reinforced profiles of 60 mm x 60 mm x 2.60 mm for frames and the mullion sections are of 60 mm x 82 mm x 2.60 mm frames are structurally reinforced with hot dip galvanized up to 50 microns of size 35 mm x 28 mm of thickness 1.5 mm the sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with EPDM weathering seal resistant and glazing bead 34.5 mm x 18 mm including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing for all floors including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Providing Staff quarters
Supplying and fixing of 28/30 mm thick Wood Plastic Composite (WPC) Door shutter, comprising of 70% virgin polymer, 15% wood powder (fibre), and the remaining 15% additives, comprising of virgin PVC polymer of K value 5860 (Suspension grade), Calcium carbonate and natural fibres (wood powder) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum door density of 650 kg/cum, screw withdrawal strength 1800N (Face) & 900N (Edge), Modulus of Elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws all as per direction (SS butt hinges and SS screws shall be paid separately) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Providing Staff quarters
Plastering with 12mm thick in single coat in CM (1:4) finished smooth (As per SS 903) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Providing Surgery Block
Supply & application of one coat of based cement primer of exterior grade II and two coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/litre for Painting to new walls of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, as per SS 911 for external walls including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Providing Surgery Block
Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, as per SS 911 for Internal walls including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Providing Surgery Block
Providing and fixing false ceiling consisting of 600mmX600mm, Solid PVC insulation panels having wall thickness of 1mm thick plain PVC rigid foam sheet and EPS as defined in of desired thickness depending on insulation required shall be insert in a frame work made using anodized aluminium Tee section of sizes 1”X1” (25X25mm, 19 gauge or 1mm thick) in square pattern of grid sizes of 2’X2’ (600X600mm). The aluminium framework is supported from the ceiling with the help of G.I. hook and G.I. wire/6mm.M.S. rods of required sizes to maintain proper level etc. the aluminium framework is supported on side wall with the use of aluminium 1”X1” (25X25mm) angles, including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Providing Surgery Block
Flooring with 16 to 18mm thick high polished granite stone slabs other than black and regular colors with borders and design as per the pattern of length not less than 2.43 mts set over a base coat of cement mortar (1:8), 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey-like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with the pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand, water, granite slabs, etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Providing Surgery Block
Flooring with double charged Matt Full Body vitrified tiles of size 600 x 1200 mm and thickness between 8-10 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of Specific colour and finish in all shades and designs , set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc.,including cost and conveyance of all materials like cement, screened sand, water and tiles etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Providing Surgery Block
Flooring with non-skid full-body ceramic floor tiles of size 600mm x 600mm and thickness between 8-10mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Part 1 to 15) of any colour and finish in all shades and designs, set over a base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey-like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with the pigment of matching shade, including cost and conveyance of all materials like cement, screened sand, water and tiles etc.,including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Providing Surgery Block
Dadooing to walls with glazed red or white full body ceramic wall tiles of 200 x 300 mm / 245 mm x 325 mm size and of 6 to 8 mm thick set over a base coat of CM(1:3) Prop. 12mm thick and neat Gray cement slurry of Honey like consistancy sread at the rate of 3.30 Kg of cement per One Square Meter and jointed wiyh neat White cement paste mixed with pigmant of matching shade including cost and conveyance of all materials like cement, sand, water, flooring Tiles etc. to site, all operational, incidental and labour charges such as mixing of cement mortar, laying, jointing, curing, lift charges etc., (for toilets) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Providing Surgery Block
Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) Fixed Glazing/ Window duly manufactured using UPVC reinforced profiles of 60 mm x 60 mm x 2.60 mm for frames and the mullion sections are of 60 mm x 82 mm x 2.60 mm frames are structurally reinforced with hot dip galvanized up to 50 microns of size 35 mm x 28 mm of thickness 1.5 mm the sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with EPDM weathering seal resistant and glazing bead 34.5 mm x 18 mm including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing for all floors. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Providing Surgery Block
Supplying and fixing of 28/30 mm thick Wood Plastic Composite (WPC) Door shutter, comprising of 70% virgin polymer, 15% wood powder (fibre), and the remaining 15% additives, comprising of virgin PVC polymer of K value 5860 (Suspension grade), Calcium carbonate and natural fibres (wood powder) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum door density of 650 kg/cum, screw withdrawal strength 1800N (Face) & 900N (Edge), Modulus of Elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws all (SS butt hinges and SS screws shall be paid separately), including cost and conveyance of all materials, all operational, incidental and labor charges including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Providing Surgery Block
Supply & application of one coat of based cement primer of exterior grade II and two coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/litre for Painting to new walls of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site as per SS 911 including cost and conveyance of all materials, all operational, incidental and labor charges including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For External walls. For Providing Kennel Blocks
Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. as per SS 911 including cost and conveyance of all materials, all operational, incidental and labor charges including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal walls. For Providing Kennel Blocks
Flooring with non-skid full-body ceramic floor tiles of size 600mm x 600mm and thickness between 8-10mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Part 1 to 15) of any colour and finish in all shades and designs, set over a base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey-like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with the pigment of matching shade, including cost and conveyance of all materials like cement, screened sand, water and tiles etc., including cost and conveyance of all materials, all operational, incidental and labor charges including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Providing Kennel Blocks
Dadooing to walls with glazed red or white full body ceramic wall tiles of 200 x 300 mm / 245 mm x 325 mm size and of 6 to 8 mm thick set over a base coat of CM(1:3) Prop. 12mm thick and neat Gray cement slurry of Honey like consistancy sread at the rate of 3.30 Kg of cement per One Square Meter and jointed wiyh neat White cement paste mixed with pigmant of matching shade including cost and conveyance of all materials like cement, sand, water, flooring Tiles etc. to site, all operational, incidental and labour charges such as mixing of cement mortar, laying, jointing, curing, lift charges etc., including cost and conveyance of all materials, all operational, incidental and labor charges including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. (for toilets) For Providing Kennel Blocks
Plastering with 12mm thick in single coat in CM (1:4) finished smooth including cutting grooves where ever necessary etc., (As per SS 903) including cost and conveyance of all materials, all operational, incidental and labor charges including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Providing Clinic Blocks
Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. as per SS 911 including cost and conveyance of all materials, all operational, incidental and labor charges including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal walls. For Providing Clinic Blocks
Flooring with 16 to 18mm thick high polished granite stone slabs other than black and regular colors with borders and design as per the pattern of length not less than 2.43 mts set over a base coat of cement mortar (1:8), 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey-like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with the pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand, water, granite slabs, etc., to work site and all operational, incidental labor & lift charges, polishing charges and all other taxes except GST on all materials, cost of base coat including cost and conveyance of all materials, all operational, incidental and labor charges including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Providing Clinic Blocks
Supply & application of one coat of based cement primer of exterior grade II and two coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/litre for Painting to new walls of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. as per SS 911 including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For External walls. For Compound Wall
Supply & application of one coat of based cement primer of exterior grade II and two coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/litre for Painting to new walls of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. as per SS 911 including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For External walls. For Construction of all other blocks
Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. as per SS 911 including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal walls. For Construction of all other blocks
Flooring with 16 to 18mm thick high polished granite stone slabs other than black and regular colors with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over a base coat of cement mortar (1:8), 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey-like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with the pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand, water, granite slabs, etc., to work site and all operational, incidental labor & lift charges, polishing charges and all other taxes except GST on all materials, cost of base coat including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Construction of all other blocks
Flooring with non-skid full-body ceramic floor tiles of size 600mm x 600mm and thickness between 8-10mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Part 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over a base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey-like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with the pigment of matching shade, including cost and conveyance of all materials like cement, screened sand, water and tiles etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Construction of all other blocks
Dadooing to walls with glazed red or white full body ceramic wall tiles of 200 x 300 mm / 245 mm x 325 mm size and of 6 to 8 mm thick set over a base coat of CM(1:3) Prop. 12mm thick and neat Gray cement slurry of Honey like consistancy sread at the rate of 3.30 Kg of cement per One Square Meter and jointed wiyh neat White cement paste mixed with pigmant of matching shade including cost and conveyance of all materials like cement, sand, water, flooring Tiles etc. to site, all operational, incidental and labour charges such as mixing of cement mortar, laying, jointing, curing, lift charges etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. (for toilets) For Construction of all other blocks
Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) Fixed Glazing/ Window duly manufactured using UPVC reinforced profiles of 60 mm x 60 mm x 2.60 mm for frames and the mullion sections are of 60 mm x 82 mm x 2.60 mm frames are structurally reinforced with hot dip galvanized up to 50 microns of size 35 mm x 28 mm of thickness 1.5 mm the sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with EPDM weathering seal resistant and glazing bead 34.5 mm x 18 mm including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing for all floors. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Construction of all other blocks
Supplying and fixing of 28/30 mm thick Wood Plastic Composite (WPC) Door shutter, comprising of 70% virgin polymer, 15% wood powder (fibre), and the remaining 15% additives, comprising of virgin PVC polymer of K value 5860 (Suspension grade), Calcium carbonate and natural fibres (wood powder) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum door density of 650 kg/cum, screw withdrawal strength 1800N (Face) & 900N (Edge), Modulus of Elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws all (SS butt hinges and SS screws shall be paid separately), including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Construction of all other blocks
Supply, Installation and commissioning approved make floor mounted Close Coupled wash down EWC conforming to IS:2556 (Part 8)-2004 suit with 'P' ' trap with dual flush porcelain cistern fixed on wash down EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap & 15 mm angle stop cock & 450 mm long PVC inter connection pipe wall flanges all of approved make etc. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge White Colour. For DRAINAGE,WATER SUPPLY AND SANITARY
S&F of Chromium plated finish brass body quarter turn Bibcock cum Health Faucet with 1m long tube and wall hook with 10 years warranty including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For DRAINAGE,WATER SUPPLY AND SANITARY
S&F of 15 mm brass body premium variety Chromium Plated finish bib tap angular shape with wall flange of not less than 500 grams weight with quarter turn spindle with either internal or external threaded connection conforming to IS 8931 and with 10 years warranty including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For DRAINAGE,WATER SUPPLY AND SANITARY
Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 660 x 460 mm - Single C.P. Pillar cock including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For DRAINAGE,WATER SUPPLY AND SANITARY
Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 660 x 460 mm - Single C.P. Pillar cock including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For DRAINAGE,WATER SUPPLY AND SANITARY
Supplying & Fixing 15 mm nominal size PVC connection with brass union nut C.P coated including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For DRAINAGE,WATER SUPPLY AND SANITARY
S&F of 15 mm CP finish brass stop valve of not less than 400 grams weight quarter turn spindle with internal threaded conforming to IS 8931 including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For DRAINAGE,WATER SUPPLY AND SANITARY
S&F CP finish brass body 32 mm dia nominal size waste coupling with half/ full thread & brass body check nut and chain & plug conforming to IS 2963: 1979 including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For DRAINAGE,WATER SUPPLY AND SANITARY
Supply & fixing 30 mm nominal size dia PVC flexible waste pipe of 914.4 mm length of Ist quality including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For DRAINAGE,WATER SUPPLY AND SANITARY
Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader fixed with screws complete Indian make : 410 x 265 x 305 mm including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For DRAINAGE,WATER SUPPLY AND SANITARY
S&F of 15 mm premium variety Chromium plated finish brass body wall mixer with hand shower with a provision for over head shower with 115 mm long bend pipe on upper side, connecting legs & wall flanges conforming to IS 8931 with 10 years warranty including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For DRAINAGE,WATER SUPPLY AND SANITARY
Supplying & fixing SINGLE BOWL stainless steel sink size 24"x18"x8 "(609.6 x 457.2 x 203.2mm) 1 mm thick with accessories including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For DRAINAGE,WATER SUPPLY AND SANITARY
S&F of 15 mm CP finish brass stop valve of not less than 400 grams weight quarter turn spindle with internal threaded conforming to IS 8931 including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For DRAINAGE,WATER SUPPLY AND SANITARY
Supplying and fixing of SWR PVC pipes of 4 Kg/Sq.cm. and fixing all specials such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps with required number of Bombay nails etc with solvent jointing as per standard practice including cost and conveyance of all materials to site, labour charges, at all floor levels . (APSS No. 1302 1319 & 1326) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For 75 mm dia 3 M Double Socket PVC/SWR pipe - 4 Kg/sq.cm. For DRAINAGE,WATER SUPPLY AND SANITARY
Supplying and fixing of SWR PVC pipes of 4 Kg/Sq.cm. and fixing all specials such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps with required number of Bombay nails etc with solvent jointing as per standard practice including cost and conveyance of all materials to site, labour charges, at all floor levels . (APSS No. 1302 1319 & 1326) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For 110 mm dia 3 M Double Socket PVC/SWR pipe - 4 Kg/sq.cm. For DRAINAGE,WATER SUPPLY AND SANITARY
Supplying & fixing of 4" (101.6 mm ) multi floor trap with Jali- UPVC/SWR Pipe fittings including cost and conveyance of all materials to site, labour charges, including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For DRAINAGE,WATER SUPPLY AND SANITARY
Providing & fixing in position under floor against wall in chases Rigid PVC Pipes, specials of make as mentioned below of approved make conforming to IS:4985 using solvent cement as per manufacturer's specification, including cutting the pipes square to the required lengths, necessary excavation, chasing & restoring to the original condition, testing for water tightness etc., (Specials at junctions of lateral pipe & vertical stack must have access doors for inspection). The formation of pipe sockets by heating the pipe shall not be permitted the joints for plain ended pipes shall be made using couplers if necessary etc. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For 40mm dia (4 kg/cm2). For DRAINAGE,WATER SUPPLY AND SANITARY
Supplying and fixing CI Nahani traps 100 mm dia Inlet- 75 mm (3") outlet pipe - 4 Kgs 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practice for all floors including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For DRAINAGE,WATER SUPPLY AND SANITARY
Supplying & fixing CI floor traps 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practice for nominal dia 75 mm (3") and grating size 100 mm dia of weight not less than 5.5 Kgs including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For DRAINAGE,WATER SUPPLY AND SANITARY
Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For S&F premium make CPVC Pipes of 15.90mm OD Pipe - SDR 13.5. For DRAINAGE,WATER SUPPLY AND SANITARY
Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For S&F premium make CPVC Pipes of 22.20mm OD Pipe - SDR 13.5 For DRAINAGE,WATER SUPPLY AND SANITARY
Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For S&F premium make CPVC Pipes of 28.60mm OD Pipe - SDR 13.5. For DRAINAGE,WATER SUPPLY AND SANITARY
Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For S&F premium make CPVC Pipes of 34.90mm OD Pipe - SDR 13.5. For DRAINAGE,WATER SUPPLY AND SANITARY
Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For S&F premium make CPVC Pipes of 41.30mm OD Pipe - SDR 13.5. For DRAINAGE,WATER SUPPLY AND SANITARY
Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For S&F premium make CPVC Pipes of 54mm OD Pipe - SDR 13.5. For DRAINAGE,WATER SUPPLY AND SANITARY
Supplying and fixing PPR ball valve of confirming to DIN standards 8077/8092 , Indian make heavy type including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For 25mm PPR Ball Valve. For DRAINAGE,WATER SUPPLY AND SANITARY
Supplying and fixing PPR ball valve of confirming to DIN standards 8077/8092 , Indian make heavy type including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For 32mm PPR Ball Valve. For DRAINAGE,WATER SUPPLY AND SANITARY
Supplying and fixing PPR ball valve of confirming to DIN standards 8077/8092 , Indian make heavy type including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For 40mm PPR Ball Valve. For DRAINAGE,WATER SUPPLY AND SANITARY
Supplying and fixing PPR ball valve of confirming to DIN standards 8077/8092 , Indian make heavy type including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For 50mm Bronze Ball valve. For DRAINAGE,WATER SUPPLY AND SANITARY
S & F Bronze Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type as approved including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For 25mm Bronze Ball valve. For DRAINAGE,WATER SUPPLY AND SANITARY
S & F Bronze Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type as approved including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For 40mm Bronze Ball valve. For DRAINAGE,WATER SUPPLY AND SANITARY
a) Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For DRAINAGE,WATER SUPPLY AND SANITARY
Supplying & fixing 150 mm x 100 mm SWG gullytrapsconforming to ISI 651 & 4127 with C.I Grating & Cost.Brick masonry in CM 1:6 prop. Intermediate chamber andfitted with304.8 mm x 288.6mm (12"x9") C.I Frame andhinged cover including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For DRAINAGE,WATER SUPPLY AND SANITARY
Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For MANHOLE UP TO .60 MTS. For DRAINAGE,WATER SUPPLY AND SANITARY
Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For MANHOLE UP TO .91 MTS. For DRAINAGE,WATER SUPPLY AND SANITARY
Constructing 457.2mm x 457.2mm (1'-6" x 1'-6") brick in CM (1:6) prop. Masonry inspection chamber upto 914.4mm (3'-0") and fitted with light weight 457.2mm x 457.2mm (1'-6" x 1"-6") frame and cover of 20kg., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For DRAINAGE,WATER SUPPLY AND SANITARY
Constructing water meter chamber of sizes as mentioned over 100mm thick CC 1:4:8 leveling course, 100mm thick CC 1:3:6 for foundation with 150mm offset alround, 230mm thick brick masonry in CM 1:3 using table mould bricks, 12mm thick plaster on outside, inside surfaces in CM 1:3, providing, fixing frame & cover in CC 1:2:4 using 20mm metal, finishing top surface with CM 1:3 plaster and finished smooth. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For DRAINAGE,WATER SUPPLY AND SANITARY
Providing & laying in position RCC hume pipes & collars of NP2 class conforming to IS standards, including all lead & lift, lowering the pipes & collars, making joints with hemp yarn, CM 1:2, curing the joint for 7 days etc complete. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For 300mm diameter. For DRAINAGE,WATER SUPPLY AND SANITARY
S & F NP soap dish heavy type with NP SCREWS including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For DRAINAGE,WATER SUPPLY AND SANITARY
a) S & F 19.04 mm dia& 609.6 mm long aluminium anodized towel rod with brackets and aluminium screws including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For DRAINAGE,WATER SUPPLY AND SANITARY
Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C.Chamber of 400m x 400m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories as per IS specifications 732/1982 (Part II) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For EXTERNAL ELECTRIFICATION
Providing independent earthing for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 40mm dia G.I Pipe of 2.5 mtr length connected with reducer providing G.I funnel with wiremesh as per National Electric Code including C.C.Chamber of size 400m x 400m x 400mm covered with R.C.C. Slab filling with salt and charcoal giving earth connection from electrode with Copper strip of 25mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to Copper strip with all accessories as per IS specification 732/1982 (Part II) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For EXTERNAL ELECTRIFICATION
Supply and Run of 40mm x 6mm copper strip including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For EXTERNAL ELECTRIFICATION
Supply and Run of 25mm x 3mm GI strip including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For EXTERNAL ELECTRIFICATION
Supply and Run of 40mm x 6mm GI strip including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For EXTERNAL ELECTRIFICATION
Supply and Run of 40mm x 6mm GI strip including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. 4 core, 10 Sq.mm gland. For EXTERNAL ELECTRIFICATION
Supply and Run of 40mm x 6mm GI strip including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. 4 core, 16 Sq.mm gland. For EXTERNAL ELECTRIFICATION
Supply and Run of 40mm x 6mm GI strip including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. 3.5 core, 50 Sq.mm gland. For EXTERNAL ELECTRIFICATION
Supply and Run of 40mm x 6mm GI strip including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. 3.5 core, 70 Sq.mm gland. For EXTERNAL ELECTRIFICATION
Supply and Run of 40mm x 6mm GI strip including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. 3.5 core, 150 Sq.mm gland. For EXTERNAL ELECTRIFICATION
Supply, design, testing, Fabrication and erection of 16 SWG CRCA sheet steel enclosure for power control cubicle panel board including cutting, bending drilling, welding and reveting etc, complete with cleaning with 7 tank process and painting with powder coating the pannel board consisting of the following accessories Incoming: 630A 4 pole, ATYS -1no 630A 4 pole MCCB,MP -1no Outgoing: 200A 4 pole MCCBs 1 nos, 160A 4 pole MCCBs 2 nos, 100A 4 pole MCCBs 5 nos, 63A 4 pole MCCBs 7 nos, Indicator lamps set 15 no, CT coils 3 nos, Digital Volt meter 1 no,Digital Ammeter 1 no, Selector switches 2 nos with necessary Lugs 4 pole connectors , 630A Alluminium bus barand 40 x 40 x 6 mm angle iron support and necessary brass Glands(MAIN PANEL) Fabricaction: Jindal / Tata Switch Gear: Legrand / L&T / ABB / Schnider. Meter: L&T / Elmeasure. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For EXTERNAL ELECTRIFICATION
Supply, design, testing, Fabrication and erection of 16 SWG CRCA sheet steel enclosure for power control cubicle panel board including cutting, bending drilling, welding and reveting etc, complete with cleaning with 7 tank process and painting with powder coating the pannel board consisting of the following accessories Incoming: 200A 4 pole MCCBs 1 nos, Outgoing: 63A 4 pole MCCBs + Contactor + 25kvar 440 V Capacitor bank -2 nos, 40A 4 pole MCCBs + Contactor + 15kvar 440 V Capacitor bank -2 nos, 32A 4 pole MCCBs + Contactor + 10kvar 440 V Capacitor bank -1 nos, 32A 4 pole MCCBs + Contactor + 5kvar 440 V Capacitor bank -1 nos, Indicator lamps set 7 no, CT coils 3 nos, Digital Volt meter 1 no,Digital Ammeter 6 no, Selector switches 2 nos with necessary Lugs 4 pole connectors , 200A Alluminium bus barand 40 x 40 x 6 mm angle iron support and necessary brass Glands (APFC PANEL) Fabricaction: Jindal / Tata Switch Gear: Legrand / L&T / ABB / Schnider. Meter: L&T / Elmeasure. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For EXTERNAL ELECTRIFICATION
Supply, design, testing, Fabrication and erection of 16 SWG CRCA sheet steel enclosure for power control cubicle panel board including cutting, bending drilling, welding and reveting etc, complete with cleaning with 7 tank process and painting with powder coating the pannel board consisting of the following accessories Incoming: 160A 4 pole MCCB,MP -1no Outgoing: 100A 4 pole MCCBs-1 no, 63A 4 pole MCBs - 4 nos, 32A 4 pole MCBs - 4 nos, Indicator lamps set 1 no, CT coils 3 nos, Digital Volt meter 1 no,Digital Ammeter 1 no, Selector switches 2 nos with necessary Lugs 4 pole connectors , 160A Alluminium bus barand 40 x 40 x 6 mm angle iron support and necessary brass Glands (COMMON PANEL) Fabricaction: Jindal / Tata Switch Gear: Legrand / L&T / ABB / Schnider. Meter: L&T / Elmeasure. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For EXTERNAL ELECTRIFICATION
Supply and fixing of Co2 type Fire Extinguishers 4.5 Kg capacity confirming to IS 2878 made from ISI marked steam less cylinder confirming to IS :7285 & CE certified and fitted with ISI marked controlled valve confirming to IS:3224, high pressure 1 Mtr discharge hose & horn complete with initial gas charged with carrying handle with wheels and wall mounting bracket. Squeeze lever discharge, used un-used indicator, Aphoxy coated paint (Red) with 93% gloss with 2 years warrantyIncluding transportation, all taxes and all labour charges etc complete. of makes Safex / Kenex / Bharat / Reliance/NewTech including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For EXTERNAL ELECTRIFICATION
Supply and fixing of ABC stored pressure squeeze grip type fire extinguishers, 6 kg capacity, IS:15683 : 2006, filled with ABC Mono Ammonium Phosphate base powder-90 complete with discharge hose and wall mounting bracket, 2mm Mild Steel, EPDM Rubbers, Pressure Guage, which work effectively on all class of fires (A, B, C & Electrical fires) with 5 years warranty Including transportation, all taxes and all labour charges etc complete. of makes Safex / Kenex / Bharat / Reliance/NewTech/Kartar including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For EXTERNAL ELECTRIFICATION
Supply and erecting fan hook of 12/15mm dia M.S. rod / bar grouted in RCC slab with making the slab as original including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Supply and Fixing of 25mm outer dia medium grade (1.8 mm thick) confirms to IS:9537 part 3 FRLS rigid P.V.C. pipe (ISI marked) concealed in wall with all required PVC junction boxes and all accessories including masonary work for light, bell, fan, and separate plug point with hot dip galvanized MS modular metal switch box with earthing terminal including all labour charges etc., complete. Makes : Precision/ Universal & Marudhar/ VIP/ GoldMedal/ Million plast /GM/Sudhakar /Anchor/ Polycab including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Supply and Fixing of 32mm outer dia (2.1 mm thick) as per IS:9537 part 3 FRLS rigid P.V.C. pipe (ISI marked) concealed in wall with all required PVC junction boxes and all accessories including masonary work for light, bell, fan, and separate plug point with hot dip galvanized MS modular metal switch box with earthing terminal including all labour charges etc., complete. Makes: Precision/Universal& Marudhar/VIP/ GoldMedal /Million plast / GM/Sudhakar /Anchor/ Polycab including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Supply and Fixing of 20mm outer dia medium grade (1.55 mm thick) confirms to IS:9537 part 3 FRLS rigid P.V.C. pipe (ISI marked) Surface pvc pipe with all required accessories including all Labour charges etc complete. for run of mains . Makes : Precision/Universal& Marudhar / VIP/GoldMedal/ Million plast / GM / Sudhakar /Anchor/ Polycab including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Wiring with 2 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI marked) and 1 run of 1.5 sqmm earth in existing pipe with 6A Modular switch (ISI marked) with cover plate, Ceiling rose, for fan and exhaust fan points etc., (for Non Residential Building) Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor. Makes of switches:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Wiring with 3 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI marked) in existing pipe with 6A Modular switch (ISI marked) with cover plate, Ceiling rose/BH/ SBH, for 2 way light points etc., (for Non Residential Building) Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/ Goldmedal/ Anchor.Makes of switches:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) Note ; Light point rate x 1.5 time = 1351.8x 1.5 = 2027.7 including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Supply and Fixing of one module PVC blanking plate (safety dummy plate for empty module) for closing the dummy blank modules in the modular switch board for ensuring safety etc., complete. Makes of Switches/Sockets:- Legrand Myrius / Crabtree verona / L&T/ HPL/ Schneider Livia/GM (Zicono/Four Five)/C&S/Goldmedal (Curve)/Million Mway/Logus Platina/ Panasonic Vision/Salzer S90 series/Anchor-Roma. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Supply and Fixing of 6 Amps modular type (ISI marked) switch, and 6 A 3/2 pin Modular type socket with cover plate on a common switch board including giving all connections and all labour charges etc., complete. Makes of Switches/Sockets:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Wiring with 2 of 22/0.3mm ( 1.5 Sq.mm) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI marked) in existing pipe with 6A (ISI marked) modular type switches and 6A, 3/2 pin modular type socket with cover plate fixing on existing, separate modular switch box Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor. Makes of Switches/Sockets:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Supply and fixing of 6-modular metal box with cover frame with 2 nos 6A (ISI marked) modular type switches and 2 nos f 6A, 3/2 pin modular type sockets giving all connections etc., complete for LABs & Computer Use. switches/sockets] Makes of Switches/Sockets:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Supply and Fixing of 3 modular metal box with cover framewith 1 no 16A/20A, 1 in one, modular type power socket outlet with 16A /20A switch (ISI marked) control giving all connections etc., complete with following configurations 1)16A Socket -1 No 2)16A Switch -1 No of makes witches /Sockets:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Supply and run of 3 of 2.5 sq.mm(phase neutral FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing MS conduit pipe for individual ligting circuits as required for switch boards. Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/ Goldmedal/Anchor. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Supply and 3 runs of 4.0 sq mm (phase neutral and earth) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing conduit pipe for run of mains as required including labour charges for 16A sockets.Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Supply & run of 3 of 6.0 Sqmm (84/0.3mm) (phase neutral and earth) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing MS conduit pipe for run of mains for AC points & SDB's etc as required. Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Supply and run of 5 of 6 Sq mm (phases, neutral and earth) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing MS conduit pipe for circuits as required for run of mains from Lighting panel board to TPN DB'S with pin type lugs and connections. [for LDBs] Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/ HPL/GM/ Million/Goldmedal/Anchor. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Supply and fixing of TPN 6 way distribution board with IP-43 protection and as per IS 8623; IS 13032; IEC 61439-3, (8+18 Module) with provision to accommodate the ELCB incomer and suitable for single pole outgoing MCB's in sheet steel enclosure with 40 to 63 A, 10 KA breaking capacity 'c' curve 4 pole MCB as incomer and 18 No of 6 to 32A single pole, 10 KA breaking capacity 'c' curve MCBs as outgoings including making connections etc., complete concealed in wall. (POWER DB). Makes for DBs: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/L&T-Newrange and Makes for MCBs: Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ Crabtree-Xpro/L&T-AU including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Supply and fixing of VTPN DB,6 way vertical type MCCB distribution board with IP-43 protection and as per IS 8623; IS 13032; IEC 61439-3, suitable to accommodate MCCB as incomer and single/three pole MCBs as outgoings with 100A, 4 Pole MCCB adjustable, confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 25 KA with thermal magnetic release as incomer with 6 No of 40/63A, 10 KA TP MCBs 'c' curve as outgoing concealed in wall. Makes for DBs: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/L&T-Newrange and Makes for MCBs: Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ Crabtree-Xpro/L&T-AU including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Supply and fixing of VTPN DB,8 way vertical type MCCB distribution board with IP-43 protection and as per IS 8623; IS 13032; IEC 61439-3, suitable to accommodate MCCB as incomer and single/three pole MCBs as outgoings with 125A, 4 Pole MCCB adjustable, confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 25 KA with thermal magnetic release as incomer with 8 No of 40/63A, 10 KA TP MCBs 'c' curve as outgoing concealed in wall. Makes for DBs: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/L&T-Newrange and Makes for MCBs: Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ Crabtree-Xpro/L&T-AU including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C.Chamber of 400m x 400m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Supply and Run of No. 8 SWG copper wire including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Supply and Run of 25mm x 3mm GI strip including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Supply and fixing of 18-20W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of > 120 lumens/watt , PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty.Makes: a) LUMINAIRE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havellsb) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Supply and fixing of...15 W. heavy duty LED Down lighter, suitable for Recessed mounting made of pressure diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGE-Venture of 150 to 265 Volts AC, P.F > 0.9, SurGE-Venture protection: 2KV, THD<10% with high power LED's having efficacy of > 100 lumins / watt, CCT: 3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Supply and fixing of...9 W. heavy duty LED Down lighter, suitable for Recessed mounting made of pressure diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGE-Venture of 150 to 265 Volts AC, P.F > 0.9, SurGE-Venture protection: 2KV, THD<10% with high power LED's having efficacy of > 100 lumins / watt, CCT: 3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Supply and Fixing of batten holder/angle holder on existing block with 7W LED Lamp with input voltage 90 to 300V, Colour temparature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base and all labour charges etc., complete. In lieu of ceiling rose. Makes: Phillips /Crompton / Bajaj / Havells / GM/HPL/Syska /GoldMedal including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Supply and fixing of Remote bell Makes: GM / Gold Medal / Million / Vimal / Anchor including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Supply and fixing of 10W LED Bulkhead fitting with Pressure die cast aluminum with opal diffuser with IP 65 protection etc., complete. Makes: As per list of recommended brands as category I. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Supply of 48" (1200mm) Sweep 5 star rated BLDC (Brush less Direct Current) Ceiling Fan with double ball bearings, input voltage 230V AC converted to 24 V DC, power input not more than 32W , air delivery 210/220 cubic meter/min with remote and without Regulator Makes : : Atomberg(Gorilla GV2 )/ Halonix(Plasma) /Havells(Efficiencia Neo) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Supply and fixing of Modular type 2- Module, Electronic fan regulator hum free step type socket size in the existing switch board. Make : Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Labour charges for fixing of ceiling fan including transportation and giving connections with 23/0060 size, 3 core round flexible copper wire leads of make Finolex/RR kabel/ Havells/ KEI/Polycab/ Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor etc including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Supply and erecting 19/20mm steel tube down rod of one meter length with bolts & nuts duly painted with matching colour of fan including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Supply and Transportation of 12" (300mm) Light duty exhaust fan with metalic blades and wire guard etc Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air- DB / Orient hill air including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Supply, transportation & installation of following 300mm x 50mm x 1.6mm of Hot Dipped Galvanized Iron perforated cable trays without cover, including horizontal and vertical bends, reducers tees, cross members and other accessories as required and duly suspended from the ceiling/Wall with suspenders etc., complete. Makes: TATA / JSW. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ADMIN BLOCK
Supply and erecting fan hook of 12/15mm dia M.S. rod / bar grouted in RCC slab with making the slab as original. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CLINIC BLOCK
Supply and Fixing of 32mm outer dia (2.1 mm thick) as per IS:9537 part 3 FRLS rigid P.V.C. pipe (ISI marked) concealed in wall with all required PVC junction boxes and all accessories including masonary work for light, bell, fan, and separate plug point with hot dip galvanized MS modular metal switch box with earthing terminal Makes: Precision/Universal& Marudhar/VIP/ GoldMedal /Million plast / GM/Sudhakar /Anchor/ Polycab including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CLINIC BLOCK
Supply and Fixing of 20mm outer dia medium grade (1.55 mm thick) confirms to IS:9537 part 3 FRLS rigid P.V.C. pipe (ISI marked) Surface pvc pipe with all required accessories for run of mains . Makes : Precision/Universal& Marudhar / VIP/GoldMedal/ Million plast / GM / Sudhakar /Anchor/ Polycab including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CLINIC BLOCK
Wiring with 2 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI marked) and 1 run of 1.5 sqmm earth in existing pipe with 6A Modular switch (ISI marked) with cover plate, Ceiling rose, for fan and exhaust fan points etc., complete. (for Non Residential Building) Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor. Makes of switches:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CLINIC BLOCK
Wiring with 3 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI marked) in existing pipe with 6A Modular switch (ISI marked) with cover plate, Ceiling rose/BH/ SBH, for 2 way light points etc., complete. (for Non Residential Building) Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/ Goldmedal/ Anchor.Makes of switches:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) Note ; Light point rate x 1.5 time = 1351.8x 1.5 = 2027.7 including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CLINIC BLOCK
Supply and Fixing of one module PVC blanking plate (safety dummy plate for empty module) for closing the dummy blank modules in the modular switch board for ensuring safety etc., complete. Makes of Switches/Sockets:- Legrand Myrius / Crabtree verona / L&T/ HPL/ Schneider Livia/GM (Zicono/Four Five)/C&S/Goldmedal (Curve)/Million Mway/Logus Platina/ Panasonic Vision/Salzer S90 series/Anchor-Roma. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CLINIC BLOCK
Supply and Fixing of 6 Amps modular type (ISI marked) switch, and 6 A 3/2 pin Modular type socket with cover plate on a common switch board. Makes of Switches/Sockets:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CLINIC BLOCK
Wiring with 2 of 22/0.3mm ( 1.5 Sq.mm) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI marked) in existing pipe with 6A (ISI marked) modular type switches and 6A, 3/2 pin modular type socket with cover plate fixing on existing, separate modular switch box Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor. Makes of Switches/Sockets:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CLINIC BLOCK
Supply and fixing of 6-modular metal box with cover frame with 2 nos 6A (ISI marked) modular type switches and 2 nos f 6A, 3/2 pin modular type sockets complete for LABs & Computer Use. switches/sockets] Makes of Switches/Sockets:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CLINIC BLOCK
Supply and Fixing of 3 modular metal box with cover framewith 1 no 16A/20A, 1 in one, modular type power socket outlet with 16A /20A switch (ISI marked) control with following configurations 1)16A Socket -1 No 2)16A Switch -1 No of makes witches /Sockets:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CLINIC BLOCK
Supply and run of 1 of 22 /0.3mm (1.5 Sq.mm) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing pipe for earth continuity Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CLINIC BLOCK
Supply and run of 3 of 2.5 sq.mm(phase neutral FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing MS conduit pipe for individual ligting circuits as required for switch boards. Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/ Goldmedal/Anchor. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CLINIC BLOCK
Supply and 3 runs of 4.0 sq mm (phase neutral and earth) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing conduit pipe for run of mains as required including labour charges for 16A sockets.Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CLINIC BLOCK
Supply and run of 5 of 6 Sq mm (phases, neutral and earth) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing MS conduit pipe for circuits as required for run of mains from Lighting panel board to TPN DB'S with pin type lugs and connections. [for LDBs] Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/ HPL/GM/ Million/Goldmedal/Anchor. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CLINIC BLOCK
Supply and fixing of TPN 6 way distribution board with IP-43 protection and as per IS 8623; IS 13032; IEC 61439-3, (8+18 Module) with provision to accommodate the ELCB incomer and suitable for single pole outgoing MCB's in sheet steel enclosure with 40 to 63 A, 10 KA breaking capacity 'c' curve 4 pole MCB as incomer and 18 No of 6 to 32A single pole, 10 KA breaking capacity 'c' curve MCBs as outgoings concealed in wall. (POWER DB). Makes for DBs: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/L&T-Newrange and Makes for MCBs: Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ Crabtree-Xpro/L&T-AU including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CLINIC BLOCK
Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C.Chamber of 400m x 400m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories as per IS specifications 732/1982 (Part II) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CLINIC BLOCK
Supply and Run of No. 8 SWG copper wire including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CLINIC BLOCK
Supply and fixing of 18-20W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of > 120 lumens/watt , PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty.Makes: a) LUMINAIRE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havellsb) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CLINIC BLOCK
Supply and fixing of...15 W. heavy duty LED Down lighter, suitable for Recessed mounting made of pressure diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGE-Venture of 150 to 265 Volts AC, P.F > 0.9, SurGE-Venture protection: 2KV, THD<10% with high power LED's having efficacy of > 100 lumins / watt, CCT: 3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CLINIC BLOCK
Supply and fixing of...9 W. heavy duty LED Down lighter, suitable for Recessed mounting made of pressure diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGE-Venture of 150 to 265 Volts AC, P.F > 0.9, SurGE-Venture protection: 2KV, THD<10% with high power LED's having efficacy of > 100 lumins / watt, CCT: 3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CLINIC BLOCK
Supply and Fixing of batten holder/angle holder on existing block with 7W LED Lamp with input voltage 90 to 300V, Colour temparature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base In lieu of ceiling rose. Makes: Phillips /Crompton / Bajaj / Havells / GM/HPL/Syska /GoldMedal including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CLINIC BLOCK
Supply and Fixing of 9W/10W LED Mirror Light fitting with decorative grey end caps, polycarbonate body and opal acrylic diffuser Makes : Philips/Bajaj / Crompton / Havells/ HPL. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CLINIC BLOCK
Supply and fixing of Remote bell Makes: GM / Gold Medal / Million / Vimal / Anchor including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CLINIC BLOCK
Supply and fixing of 10W LED Bulkhead fitting with Pressure die cast aluminum with opal diffuser with IP 65 protection etc., complete. Makes: As per list of recommended brands as category I. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CLINIC BLOCK
Supply of 48" (1200mm) Sweep 5 star rated BLDC (Brush less Direct Current) Ceiling Fan with double ball bearings, input voltage 230V AC converted to 24 V DC, power input not more than 32W , air delivery 210/220 cubic meter/min with remote and without Regulator Makes : : Atomberg(Gorilla GV2 )/ Halonix(Plasma) /Havells(Efficiencia Neo) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CLINIC BLOCK
Supply and fixing of Modular type 2- Module, Electronic fan regulator hum free step type socket size in the existing switch board. Make : Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CLINIC BLOCK
Labour charges for fixing of ceiling fan including transportation and giving connections with 23/0060 size, 3 core round flexible copper wire leads of make Finolex/RR kabel/ Havells/ KEI/Polycab/ Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor etc including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CLINIC BLOCK
Supply and erecting 19/20mm steel tube down rod of one meter length with bolts & nuts duly painted with matching colour of fan complete including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CLINIC BLOCK
Supply and Transportation of 12" (300mm) Light duty exhaust fan with metalic blades and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air- DB / Orient hill air including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CLINIC BLOCK
Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CLINIC BLOCK
Supply, Transportation, Installation, Testing and Comissioning of 2MP Dome camera 1/2.8'' CMOS progressive sensor, 2.7 to 13mm Motorized lens, min. illumination 0.006 Lux F1.6 (color), 0 Lux B/w, 50dB S/N ratio; 1/8 ~1/32000 shutter speed, Max 30 fps, IR distance - 40Mtr or better, 120 dB or better WDR, triple stream, Protocal : IPv4, TLS, DHCP, IPv6, TCP / IP, HTTP, SMTP, UDP, HTTPS, RTSP / RTP / RTCP,DNS,SNMP, IGMP / Multicast, NTP, QoS, 802.1X, ICMP, ARP; Line crossing, Face Detection, Motion Detecton, People counting, Intrusion, Loitering, SMD, Tampering; local storage : up to 256GB; Alarm IN & Outputs, Audio IN & Out; ONVIF-S, G, T, M; Security: HTTPS, Digest authentication, User account and password protection,TLS1.2 only, Stream encryption, AES128 / Telnet closed, IP Filter, PCI-DSS compliance; IP67,IK10, UL,CE,FCC, NDAA Compliant including 5 yrs warranty to be obtained from the OEM. MAKES: Bosch / Honeywell / Axis / Mobotix. or equivalent as approved by Department including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CLINIC BLOCK
Supply and erecting fan hook of 12/15mm dia M.S. rod / bar grouted in RCC slab with making the slab as original. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work SURGERY BLOCK
Supply and Fixing of 32mm outer dia (2.1 mm thick) as per IS:9537 part 3 FRLS rigid P.V.C. pipe (ISI marked) concealed in wall with all required PVC junction boxes and all accessories including masonary work for light, bell, fan, and separate plug point with hot dip galvanized MS modular metal switch box with earthing terminal including all labour charges etc., complete. Makes: Precision/Universal& Marudhar/VIP/ GoldMedal /Million plast / GM/Sudhakar /Anchor/ Polycab including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work SURGERY BLOCK
Supply and Fixing of 20mm outer dia medium grade (1.55 mm thick) confirms to IS:9537 part 3 FRLS rigid P.V.C. pipe (ISI marked) Surface pvc pipe with all required accessories including all Labour charges etc complete. for run of mains . Makes : Precision/Universal& Marudhar / VIP/GoldMedal/ Million plast / GM / Sudhakar /Anchor/ Polycab including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work SURGERY BLOCK
Wiring with 2 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI marked) and 1 run of 1.5 sqmm earth in existing pipe with 6A Modular switch (ISI marked) with cover plate, Ceiling rose, for fan and exhaust fan points etc., complete. (for Non Residential Building) Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor. Makes of switches:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work SURGERY BLOCK
Wiring with 3 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI marked) in existing pipe with 6A Modular switch (ISI marked) with cover plate, Ceiling rose/BH/ SBH, for 2 way light points etc., complete. (for Non Residential Building) Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/ Goldmedal/ Anchor.Makes of switches:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) Note ; Light point rate x 1.5 time = 1351.8x 1.5 = 2027.7 including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work SURGERY BLOCK
Supply and Fixing of one module PVC blanking plate (safety dummy plate for empty module) for closing the dummy blank modules in the modular switch board for ensuring safety etc., complete. Makes of Switches/Sockets:- Legrand Myrius / Crabtree verona / L&T/ HPL/ Schneider Livia/GM (Zicono/Four Five)/C&S/Goldmedal (Curve)/Million Mway/Logus Platina/ Panasonic Vision/Salzer S90 series/Anchor-Roma. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work SURGERY BLOCK
Supply and Fixing of 6 Amps modular type (ISI marked) switch, and 6 A 3/2 pin Modular type socket with cover plate on a common switch board Makes of Switches/Sockets:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work SURGERY BLOCK
Wiring with 2 of 22/0.3mm ( 1.5 Sq.mm) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI marked) in existing pipe with 6A (ISI marked) modular type switches and 6A, 3/2 pin modular type socket with cover plate fixing on existing, separate modular switch box Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor. Makes of Switches/Sockets:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work SURGERY BLOCK
Supply and fixing of 6-modular metal box with cover frame with 2 nos 6A (ISI marked) modular type switches and 2 nos f 6A, 3/2 pin modular type sockets for LABs & Computer Use. switches/sockets] Makes of Switches/Sockets:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work SURGERY BLOCK
Supply and Fixing of 3 modular metal box with cover framewith 1 no 16A/20A, 1 in one, modular type power socket outlet with 16A /20A switch (ISI marked) control with following configurations 1)16A Socket -1 No 2)16A Switch -1 No of makes witches /Sockets:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work SURGERY BLOCK
Supply and run of 3 of 2.5 sq.mm(phase neutral FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing MS conduit pipe for individual ligting circuits as required for switch boards. Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/ Goldmedal/Anchor. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work SURGERY BLOCK
Supply and 3 runs of 4.0 sq mm (phase neutral and earth) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing conduit pipe for run of mains as required including labour charges for 16A sockets.Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work SURGERY BLOCK
Supply and run of 5 of 6 Sq mm (phases, neutral and earth) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing MS conduit pipe for circuits as required for run of mains from Lighting panel board to TPN DB'S with pin type lugs and connections. [for LDBs] Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/ HPL/GM/ Million/Goldmedal/Anchor. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work SURGERY BLOCK
Supply and fixing of TPN 6 way distribution board with IP-43 protection and as per IS 8623; IS 13032; IEC 61439-3, (8+18 Module) with provision to accommodate the ELCB incomer and suitable for single pole outgoing MCB's in sheet steel enclosure with 40 to 63 A, 10 KA breaking capacity 'c' curve 4 pole MCB as incomer and 18 No of 6 to 32A single pole, 10 KA breaking capacity 'c' curve MCBs as outgoings including making connections etc., complete concealed in wall. (POWER DB). Makes for DBs: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/L&T-Newrange and Makes for MCBs: Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ Crabtree-Xpro/L&T-AU including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work SURGERY BLOCK
Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C.Chamber of 400m x 400m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length as per IS specifications 732/1982 (Part II) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work SURGERY BLOCK
Supply and Run of No. 8 SWG copper wire including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work SURGERY BLOCK
Supply and fixing of 18-20W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of > 120 lumens/watt , PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty.Makes: a) LUMINAIRE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havellsb) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work SURGERY BLOCK
Supply and fixing of...15 W. heavy duty LED Down lighter, suitable for Recessed mounting made of pressure diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGE-Venture of 150 to 265 Volts AC, P.F > 0.9, SurGE-Venture protection: 2KV, THD<10% with high power LED's having efficacy of > 100 lumins / watt, CCT: 3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work SURGERY BLOCK
Supply and fixing of...9 W. heavy duty LED Down lighter, suitable for Recessed mounting made of pressure diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGE-Venture of 150 to 265 Volts AC, P.F > 0.9, SurGE-Venture protection: 2KV, THD<10% with high power LED's having efficacy of > 100 lumins / watt, CCT: 3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work SURGERY BLOCK
Supply and Fixing of batten holder/angle holder on existing block with 7W LED Lamp with input voltage 90 to 300V, Colour temparature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base aIn lieu of ceiling rose. Makes: Phillips /Crompton / Bajaj / Havells / GM/HPL/Syska /GoldMedal including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work SURGERY BLOCK
Supply and Fixing of 9W/10W LED Mirror Light fitting with decorative grey end caps, polycarbonate body and opal acrylic diffuser Makes : Philips/Bajaj / Crompton / Havells/ HPL. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work SURGERY BLOCK
Supply and fixing of Remote bell Makes: GM / Gold Medal / Million / Vimal / Anchor including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work SURGERY BLOCK
Supply and fixing of 10W LED Bulkhead fitting with Pressure die cast aluminum with opal diffuser with IP 65 protection etc., complete. Makes: As per list of recommended brands as category I. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work SURGERY BLOCK
Supply of 48" (1200mm) Sweep 5 star rated BLDC (Brush less Direct Current) Ceiling Fan with double ball bearings, input voltage 230V AC converted to 24 V DC, power input not more than 32W , air delivery 210/220 cubic meter/min with remote and without Regulator Makes : : Atomberg(Gorilla GV2 )/ Halonix(Plasma) /Havells(Efficiencia Neo) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work SURGERY BLOCK
Supply and fixing of Modular type 2- Module, Electronic fan regulator hum free step type socket size in the existing switch board. Make : Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work SURGERY BLOCK
Labour charges for fixing of ceiling fan including transportation and giving connections with 23/0060 size, 3 core round flexible copper wire leads of make Finolex/RR kabel/ Havells/ KEI/Polycab/ Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor etc complete including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work SURGERY BLOCK
Supply and erecting 19/20mm steel tube down rod of one meter length with bolts & nuts duly painted with matching colour of fan complete including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work SURGERY BLOCK
Supply and Transportation of 12" (300mm) Light duty exhaust fan with metalic blades and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air- DB / Orient hill air including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work SURGERY BLOCK
Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work SURGERY BLOCK
Supply, transportation & installation of following 300mm x 50mm x 1.6mm of Hot Dipped Galvanized Iron perforated cable trays without cover, including horizontal and vertical bends, reducers tees, cross members and other accessories as required and duly suspended from the ceiling/Wall with suspenders etc., complete. Makes: TATA / JSW. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work SURGERY BLOCK
Supply and erecting fan hook of 12/15mm dia M.S. rod / bar grouted in RCC slab with making the slab as original. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work STAFF QUARTERS
Supply and Fixing of 32mm outer dia (2.1 mm thick) as per IS:9537 part 3 FRLS rigid P.V.C. pipe (ISI marked) concealed in wall with all required PVC junction boxes and all accessories including masonary work for light, bell, fan, and separate plug point with hot dip galvanized MS modular metal switch box with earthing terminal Makes: Precision/Universal& Marudhar/VIP/ GoldMedal /Million plast / GM/Sudhakar /Anchor/ Polycab including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work STAFF QUARTERS
Supply and Fixing of 20mm outer dia medium grade (1.55 mm thick) confirms to IS:9537 part 3 FRLS rigid P.V.C. pipe (ISI marked) Surface pvc pipe with all required accessoriesfor run of mains . Makes : Precision/Universal& Marudhar / VIP/GoldMedal/ Million plast / GM / Sudhakar /Anchor/ Polycab including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work STAFF QUARTERS
Wiring with 2 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI marked) and 1 run of 1.5 sqmm earth in existing pipe with 6A Modular switch (ISI marked) with cover plate, Ceiling rose, for fan and exhaust fan points etc., complete. (for Non Residential Building) Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor. Makes of switches:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work STAFF QUARTERS
Wiring with 3 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI marked) in existing pipe with 6A Modular switch (ISI marked) with cover plate, Ceiling rose/BH/ SBH,complete for 2 way light points etc., complete. (for Non Residential Building) Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/ Goldmedal/ Anchor.Makes of switches:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) Note ; Light point rate x 1.5 time = 1351.8x 1.5 = 2027.7 including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work STAFF QUARTERS
Supply and Fixing of one module PVC blanking plate (safety dummy plate for empty module) for closing the dummy blank modules in the modular switch board for ensuring safety etc., complete. Makes of Switches/Sockets:- Legrand Myrius / Crabtree verona / L&T/ HPL/ Schneider Livia/GM (Zicono/Four Five)/C&S/Goldmedal (Curve)/Million Mway/Logus Platina/ Panasonic Vision/Salzer S90 series/Anchor-Roma. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work STAFF QUARTERS
Supply and Fixing of 6 Amps modular type (ISI marked) switch, and 6 A 3/2 pin Modular type socket with cover plate on a common switch board Makes of Switches/Sockets:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work STAFF QUARTERS
Wiring with 2 of 22/0.3mm ( 1.5 Sq.mm) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI marked) in existing pipe with 6A (ISI marked) modular type switches and 6A, 3/2 pin modular type socket with cover plate fixing on existing, separate modular switch box Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor. Makes of Switches/Sockets:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work STAFF QUARTERS
Supply and fixing of 6-modular metal box with cover frame with 2 nos 6A (ISI marked) modular type switches and 2 nos f 6A, 3/2 pin modular type sockets for LABs & Computer Use. switches/sockets] Makes of Switches/Sockets:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work STAFF QUARTERS
Supply and Fixing of 3 modular metal box with cover framewith 1 no 16A/20A, 1 in one, modular type power socket outlet with 16A /20A switch (ISI marked) control with following configurations 1)16A Socket -1 No 2)16A Switch -1 No of makes witches /Sockets:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work STAFF QUARTERS
Supply and run of 3 of 2.5 sq.mm(phase neutral FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing MS conduit pipe for individual ligting circuits as required for switch boards. Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/ Goldmedal/Anchor. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work STAFF QUARTERS
Supply and 3 runs of 4.0 sq mm (phase neutral and earth) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing conduit pipe for run of mains including labour charges etc., complete as required including labour charges for 16A sockets.Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work STAFF QUARTERS
Supply and run of 5 of 6 Sq mm (phases, neutral and earth) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing MS conduit pipe for circuits as required for run of mains from Lighting panel board to TPN DB'S with pin type lugs and connections. [for LDBs] Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/ HPL/GM/ Million/Goldmedal/Anchor. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work STAFF QUARTERS
Supply and fixing of TPN 6 way distribution board with IP-43 protection and as per IS 8623; IS 13032; IEC 61439-3, (8+18 Module) with provision to accommodate the ELCB incomer and suitable for single pole outgoing MCB's in sheet steel enclosure with 40 to 63 A, 10 KA breaking capacity 'c' curve 4 pole MCB as incomer and 18 No of 6 to 32A single pole, 10 KA breaking capacity 'c' curve MCBs as outgoings including making connections etc., complete concealed in wall. (POWER DB). Makes for DBs: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/L&T-Newrange and Makes for MCBs: Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ Crabtree-Xpro/L&T-AU including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work STAFF QUARTERS
Supply and fixing of VTPN DB,6 way vertical type MCCB distribution board with IP-43 protection and as per IS 8623; IS 13032; IEC 61439-3, suitable to accommodate MCCB as incomer and single/three pole MCBs as outgoings with 100A, 4 Pole MCCB adjustable, confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 25 KA with thermal magnetic release as incomer with 6 No of 40/63A, 10 KA TP MCBs 'c' curve as outgoing concealed in wall. Makes for DBs: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/L&T-Newrange and Makes for MCBs: Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ Crabtree-Xpro/L&T-AU including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work STAFF QUARTERS
Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C.Chamber of 400m x 400m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length as per IS specifications 732/1982 (Part II) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work STAFF QUARTERS
Supply and Run of No. 8 SWG copper wireincluding contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work STAFF QUARTERS
Supply and Run of 25mm x 3mm GI strip including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work STAFF QUARTERS
Supply and fixing of 18-20W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of > 120 lumens/watt , PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty.Makes: a) LUMINAIRE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havellsb) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work STAFF QUARTERS
Supply and fixing of...15 W. heavy duty LED Down lighter, suitable for Recessed mounting made of pressure diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGE-Venture of 150 to 265 Volts AC, P.F > 0.9, SurGE-Venture protection: 2KV, THD<10% with high power LED's having efficacy of > 100 lumins / watt, CCT: 3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work STAFF QUARTERS
Supply and fixing of...9 W. heavy duty LED Down lighter, suitable for Recessed mounting made of pressure diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGE-Venture of 150 to 265 Volts AC, P.F > 0.9, SurGE-Venture protection: 2KV, THD<10% with high power LED's having efficacy of > 100 lumins / watt, CCT: 3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work STAFF QUARTERS
Supply and Fixing of batten holder/angle holder on existing block with 7W LED Lamp with input voltage 90 to 300V, Colour temparature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base In lieu of ceiling rose. Makes: Phillips /Crompton / Bajaj / Havells / GM/HPL/Syska /GoldMedal including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work STAFF QUARTERS
Supply and Fixing of 9W/10W LED Mirror Light fitting with decorative grey end caps, polycarbonate body and opal acrylic diffuser Makes : Philips/Bajaj / Crompton / Havells/ HPL. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work STAFF QUARTERS
Supply and fixing of Remote bell including giving connections Makes: GM / Gold Medal / Million / Vimal / Anchor including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work STAFF QUARTERS
Supply and fixing of 10W LED Bulkhead fitting with Pressure die cast aluminum with opal diffuser with IP 65 protection etc., complete. Makes: As per list of recommended brands as category I. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work STAFF QUARTERS
Supply of 48" (1200mm) Sweep 5 star rated BLDC (Brush less Direct Current) Ceiling Fan with double ball bearings, input voltage 230V AC converted to 24 V DC, power input not more than 32W , air delivery 210/220 cubic meter/min with remote and without Regulator Makes : : Atomberg(Gorilla GV2 )/ Halonix(Plasma) /Havells(Efficiencia Neo) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work STAFF QUARTERS
Supply and fixing of Modular type 2- Module, Electronic fan regulator hum free step type socket size in the existing switch board. Make : Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work STAFF QUARTERS
Labour charges for fixing of ceiling fan including transportation and giving connections with 23/0060 size, 3 core round flexible copper wire leads of make Finolex/RR kabel/ Havells/ KEI/Polycab/ Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor etc complete including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work STAFF QUARTERS
Supply and erecting 19/20mm steel tube down rod of one meter length with bolts & nuts duly painted with matching colour of fan complete including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work STAFF QUARTERS
Supply and Transportation of 12" (300mm) Light duty exhaust fan with metalic blades and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air- DB / Orient hill air including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work STAFF QUARTERS
Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work STAFF QUARTERS
Supply, transportation & installation of following 300mm x 50mm x 1.6mm of Hot Dipped Galvanized Iron perforated cable trays without cover, including horizontal and vertical bends, reducers tees, cross members and other accessories as required and duly suspended from the ceiling/Wall with suspenders etc., complete. Makes: TATA / JSW. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work STAFF QUARTERS
Supply and fixing of 12V 26 AH SMF battery with 3 years warranty, including wire leads, connections etc complete. Makes: Exide / AMARON / Luminous including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work STAFF QUARTERS
Supply and erecting fan hook of 12/15mm dia M.S. rod / bar grouted in RCC slab with making the slab as original including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work QUARENTIES
Supply and Fixing of 32mm outer dia (2.1 mm thick) as per IS:9537 part 3 FRLS rigid P.V.C. pipe (ISI marked) concealed in wall with all required PVC junction boxes and all accessories including masonary work for light, bell, fan, and separate plug point with hot dip galvanized MS modular metal switch box with earthing terminal including all labour charges etc., complete. Makes: Precision/Universal& Marudhar/VIP/ GoldMedal /Million plast / GM/Sudhakar /Anchor/ Polycab including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work QUARENTIES
Supply and Fixing of 20mm outer dia medium grade (1.55 mm thick) confirms to IS:9537 part 3 FRLS rigid P.V.C. pipe (ISI marked) Surface pvc pipe with all required accessories for run of mains . Makes : Precision/Universal& Marudhar / VIP/GoldMedal/ Million plast / GM / Sudhakar /Anchor/ Polycab including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work QUARENTIES
Wiring with 2 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI marked) and 1 run of 1.5 sqmm earth in existing pipe with 6A Modular switch (ISI marked) with cover plate, Ceiling rose, for fan and exhaust fan points etc., complete. (for Non Residential Building) Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor. Makes of switches:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work QUARENTIES
Supply and Fixing of one module PVC blanking plate (safety dummy plate for empty module) for closing the dummy blank modules in the modular switch board for ensuring safety etc., complete. Makes of Switches/Sockets:- Legrand Myrius / Crabtree verona / L&T/ HPL/ Schneider Livia/GM (Zicono/Four Five)/C&S/Goldmedal (Curve)/Million Mway/Logus Platina/ Panasonic Vision/Salzer S90 series/Anchor-Roma. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work QUARENTIES
Supply and Fixing of 6 Amps modular type (ISI marked) switch, and 6 A 3/2 pin Modular type socket with cover plate on a common switch board Makes of Switches/Sockets:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work QUARENTIES
Wiring with 2 of 22/0.3mm ( 1.5 Sq.mm) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI marked) in existing pipe with 6A (ISI marked) modular type switches and 6A, 3/2 pin modular type socket with cover plate fixing on existing, separate modular switch box Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor. Makes of Switches/Sockets:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work QUARENTIES
Supply and fixing of 6-modular metal box with cover frame with 2 nos 6A (ISI marked) modular type switches and 2 nos f 6A, 3/2 pin modular type sockets complete for LABs & Computer Use. switches/sockets] Makes of Switches/Sockets:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work QUARENTIES
Supply and Fixing of 3 modular metal box with cover framewith 1 no 16A/20A, 1 in one, modular type power socket outlet with 16A /20A switch (ISI marked) control with following configurations 1)16A Socket -1 No 2)16A Switch -1 No of makes witches /Sockets:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work QUARENTIES
Supply and run of 3 of 2.5 sq.mm(phase neutral FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing MS conduit pipe for individual ligting circuits as required for switch boards. Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/ Goldmedal/Anchor. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work QUARENTIES
Supply and 3 runs of 4.0 sq mm (phase neutral and earth) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing conduit pipe for run of mains as required for 16A sockets.Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work QUARENTIES
Supply and fixing of TPN 6 way distribution board with IP-43 protection and as per IS 8623; IS 13032; IEC 61439-3, (8+18 Module) with provision to accommodate the ELCB incomer and suitable for single pole outgoing MCB's in sheet steel enclosure with 40 to 63 A, 10 KA breaking capacity 'c' curve 4 pole MCB as incomer and 18 No of 6 to 32A single pole, 10 KA breaking capacity 'c' curve MCBs as outgoings including making connections etc., complete concealed in wall. (POWER DB). Makes for DBs: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/L&T-Newrange and Makes for MCBs: Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ Crabtree-Xpro/L&T-AU including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work QUARENTIES
Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C.Chamber of 400m x 400m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length as per IS specifications 732/1982 (Part II) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work QUARENTIES
Supply and Run of No. 8 SWG copper wire including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work QUARENTIES
Supply and fixing of 18-20W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of > 120 lumens/watt , PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty.Makes: a) LUMINAIRE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havellsb) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work QUARENTIES
Supply and fixing of...15 W. heavy duty LED Down lighter, suitable for Recessed mounting made of pressure diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGE-Venture of 150 to 265 Volts AC, P.F > 0.9, SurGE-Venture protection: 2KV, THD<10% with high power LED's having efficacy of > 100 lumins / watt, CCT: 3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work QUARENTIES
Supply and fixing of...9 W. heavy duty LED Down lighter, suitable for Recessed mounting made of pressure diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGE-Venture of 150 to 265 Volts AC, P.F > 0.9, SurGE-Venture protection: 2KV, THD<10% with high power LED's having efficacy of > 100 lumins / watt, CCT: 3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work QUARENTIES
Supply and Fixing of batten holder/angle holder on existing block with 7W LED Lamp with input voltage 90 to 300V, Colour temparature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base In lieu of ceiling rose. Makes: Phillips /Crompton / Bajaj / Havells / GM/HPL/Syska /GoldMedal including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work QUARENTIES
Supply and Fixing of 9W/10W LED Mirror Light fitting with decorative grey end caps, polycarbonate body and opal acrylic diffuser Makes : Philips/Bajaj / Crompton / Havells/ HPL. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work QUARENTIES
Supply and fixing of Remote bell Makes: GM / Gold Medal / Million / Vimal / Anchor including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work QUARENTIES
Supply and fixing of 10W LED Bulkhead fitting with Pressure die cast aluminum with opal diffuser with IP 65 protection etc., complete. Makes: As per list of recommended brands as category I. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work QUARENTIES
Supply of 48" (1200mm) Sweep 5 star rated BLDC (Brush less Direct Current) Ceiling Fan with double ball bearings, input voltage 230V AC converted to 24 V DC, power input not more than 32W , air delivery 210/220 cubic meter/min with remote and without Regulator Makes : : Atomberg(Gorilla GV2 )/ Halonix(Plasma) /Havells(Efficiencia Neo) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work QUARENTIES
Supply and fixing of Modular type 2- Module, Electronic fan regulator hum free step type socket size in the existing switch board. Make : Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work QUARENTIES
Labour charges for fixing of ceiling fan including transportation and giving connections with 23/0060 size, 3 core round flexible copper wire leads of make Finolex/RR kabel/ Havells/ KEI/Polycab/ Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor etc complete including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work QUARENTIES
Supply and erecting 19/20mm steel tube down rod of one meter length with bolts & nuts duly painted with matching colour of fan complete including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work QUARENTIES
Supply and erecting fan hook of 12/15mm dia M.S. rod / bar grouted in RCC slab with making the slab as original. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CREMATORIUM
Supply and Fixing of 32mm outer dia (2.1 mm thick) as per IS:9537 part 3 FRLS rigid P.V.C. pipe (ISI marked) concealed in wall with all required PVC junction boxes and all accessories including masonary work for light, bell, fan, and separate plug point with hot dip galvanized MS modular metal switch box with earthing terminal including all labour charges etc., complete. Makes: Precision/Universal& Marudhar/VIP/ GoldMedal /Million plast / GM/Sudhakar /Anchor/ Polycab including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CREMATORIUM
Supply and Fixing of 20mm outer dia medium grade (1.55 mm thick) confirms to IS:9537 part 3 FRLS rigid P.V.C. pipe (ISI marked) Surface pvc pipe with all required accessories for run of mains . Makes : Precision/Universal& Marudhar / VIP/GoldMedal/ Million plast / GM / Sudhakar /Anchor/ Polycab including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CREMATORIUM
Wiring with 2 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI marked) and 1 run of 1.5 sqmm earth in existing pipe with 6A Modular switch (ISI marked) with cover plate, Ceiling rose, for fan and exhaust fan points etc., complete. (for Non Residential Building) Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor. Makes of switches:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CREMATORIUM
Supply and Fixing of one module PVC blanking plate (safety dummy plate for empty module) for closing the dummy blank modules in the modular switch board for ensuring safety etc., complete. Makes of Switches/Sockets:- Legrand Myrius / Crabtree verona / L&T/ HPL/ Schneider Livia/GM (Zicono/Four Five)/C&S/Goldmedal (Curve)/Million Mway/Logus Platina/ Panasonic Vision/Salzer S90 series/Anchor-Roma. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CREMATORIUM
Supply and Fixing of 6 Amps modular type (ISI marked) switch, and 6 A 3/2 pin Modular type socket with cover plate on a common switch board Makes of Switches/Sockets:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CREMATORIUM
Wiring with 2 of 22/0.3mm ( 1.5 Sq.mm) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI marked) in existing pipe with 6A (ISI marked) modular type switches and 6A, 3/2 pin modular type socket with cover plate fixing on existing, separate modular switch box Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor. Makes of Switches/Sockets:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CREMATORIUM
Supply and fixing of 6-modular metal box with cover frame with 2 nos 6A (ISI marked) modular type switches and 2 nos f 6A, 3/2 pin modular type sockets for LABs & Computer Use. switches/sockets] Makes of Switches/Sockets:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CREMATORIUM
Supply and Fixing of 3 modular metal box with cover framewith 1 no 16A/20A, 1 in one, modular type power socket outlet with 16A /20A switch (ISI marked) control with following configurations 1)16A Socket -1 No 2)16A Switch -1 No of makes witches /Sockets:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CREMATORIUM
Supply and run of 3 of 2.5 sq.mm(phase neutral FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing MS conduit pipe for individual ligting circuits as required for switch boards. Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/ Goldmedal/Anchor. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CREMATORIUM
Supply and 3 runs of 4.0 sq mm (phase neutral and earth) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing conduit pipe for run of mains as required including labour charges for 16A sockets.Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CREMATORIUM
Supply and fixing of TPN 6 way distribution board with IP-43 protection and as per IS 8623; IS 13032; IEC 61439-3, (8+18 Module) with provision to accommodate the ELCB incomer and suitable for single pole outgoing MCB's in sheet steel enclosure with 40 to 63 A, 10 KA breaking capacity 'c' curve 4 pole MCB as incomer and 18 No of 6 to 32A single pole, 10 KA breaking capacity 'c' curve MCBs as outgoings including making connections etc., complete concealed in wall. (POWER DB). Makes for DBs: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/L&T-Newrange and Makes for MCBs: Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ Crabtree-Xpro/L&T-AU including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CREMATORIUM
Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C.Chamber of 400m x 400m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length as per IS specifications 732/1982 (Part II) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CREMATORIUM
Supply and Run of No. 8 SWG copper wire including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CREMATORIUM
Supply and fixing of 18-20W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of > 120 lumens/watt , PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty.Makes: a) LUMINAIRE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havellsb) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CREMATORIUM
Supply and fixing of...15 W. heavy duty LED Down lighter, suitable for Recessed mounting made of pressure diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGE-Venture of 150 to 265 Volts AC, P.F > 0.9, SurGE-Venture protection: 2KV, THD<10% with high power LED's having efficacy of > 100 lumins / watt, CCT: 3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CREMATORIUM
Supply and fixing of...9 W. heavy duty LED Down lighter, suitable for Recessed mounting made of pressure diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGE-Venture of 150 to 265 Volts AC, P.F > 0.9, SurGE-Venture protection: 2KV, THD<10% with high power LED's having efficacy of > 100 lumins / watt, CCT: 3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CREMATORIUM
Supply and Fixing of batten holder/angle holder on existing block with 7W LED Lamp with input voltage 90 to 300V, Colour temparature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base In lieu of ceiling rose. Makes: Phillips /Crompton / Bajaj / Havells / GM/HPL/Syska /GoldMedal including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CREMATORIUM
Supply and fixing of Remote bell Makes: GM / Gold Medal / Million / Vimal / Anchor including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CREMATORIUM
Supply and fixing of 10W LED Bulkhead fitting with Pressure die cast aluminum with opal diffuser with IP 65 protection etc., complete. Makes: As per list of recommended brands as category I. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CREMATORIUM
Supply of 48" (1200mm) Sweep 5 star rated BLDC (Brush less Direct Current) Ceiling Fan with double ball bearings, input voltage 230V AC converted to 24 V DC, power input not more than 32W , air delivery 210/220 cubic meter/min with remote and without Regulator Makes : : Atomberg(Gorilla GV2 )/ Halonix(Plasma) /Havells(Efficiencia Neo) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CREMATORIUM
Supply and fixing of Modular type 2- Module, Electronic fan regulator hum free step type socket size in the existing switch board. Make : Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CREMATORIUM
Labour charges for fixing of ceiling fan including transportation and giving connections with 23/0060 size, 3 core round flexible copper wire leads of make Finolex/RR kabel/ Havells/ KEI/Polycab/ Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor etc complete including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CREMATORIUM
Supply and erecting 19/20mm steel tube down rod of one meter length with bolts & nuts duly painted with matching colour of fan complete including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CREMATORIUM
Supply and erecting fan hook of 12/15mm dia M.S. rod / bar grouted in RCC slab with making the slab as original. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ABC KENNELS LARGE/SMALL
Supply and Fixing of 32mm outer dia (2.1 mm thick) as per IS:9537 part 3 FRLS rigid P.V.C. pipe (ISI marked) concealed in wall with all required PVC junction boxes and all accessories including masonary work for light, bell, fan, and separate plug point with hot dip galvanized MS modular metal switch box with earthing terminal including all labour charges etc., complete. Makes: Precision/Universal& Marudhar/VIP/ GoldMedal /Million plast / GM/Sudhakar /Anchor/ Polycab including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ABC KENNELS LARGE/SMALL
Supply and Fixing of 20mm outer dia medium grade (1.55 mm thick) confirms to IS:9537 part 3 FRLS rigid P.V.C. pipe (ISI marked) Surface pvc pipe with all required accessoriesfor run of mains . Makes : Precision/Universal& Marudhar / VIP/GoldMedal/ Million plast / GM / Sudhakar /Anchor/ Polycab including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ABC KENNELS LARGE/SMALL
Wiring with 2 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI marked) and 1 run of 1.5 sqmm earth in existing pipe with 6A Modular switch (ISI marked) with cover plate, Ceiling rose, for fan and exhaust fan points etc., complete. (for Non Residential Building) Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor. Makes of switches:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ABC KENNELS LARGE/SMALL
Supply and Fixing of one module PVC blanking plate (safety dummy plate for empty module) for closing the dummy blank modules in the modular switch board for ensuring safety etc., complete. Makes of Switches/Sockets:- Legrand Myrius / Crabtree verona / L&T/ HPL/ Schneider Livia/GM (Zicono/Four Five)/C&S/Goldmedal (Curve)/Million Mway/Logus Platina/ Panasonic Vision/Salzer S90 series/Anchor-Roma. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ABC KENNELS LARGE/SMALL
Supply and Fixing of 6 Amps modular type (ISI marked) switch, and 6 A 3/2 pin Modular type socket with cover plate on a common switch board Makes of Switches/Sockets:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ABC KENNELS LARGE/SMALL
Wiring with 2 of 22/0.3mm ( 1.5 Sq.mm) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI marked) in existing pipe with 6A (ISI marked) modular type switches and 6A, 3/2 pin modular type socket with cover plate fixing on existing, separate modular switch box Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor. Makes of Switches/Sockets:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ABC KENNELS LARGE/SMALL
Supply and Fixing of 3 modular metal box with cover framewith 1 no 16A/20A, 1 in one, modular type power socket outlet with 16A /20A switch (ISI marked) control with following configurations 1)16A Socket -1 No 2)16A Switch -1 No of makes witches /Sockets:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ABC KENNELS LARGE/SMALL
Supply and run of 3 of 2.5 sq.mm(phase neutral FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing MS conduit pipe for individual ligting circuits as required for switch boards. Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/ Goldmedal/Anchor. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ABC KENNELS LARGE/SMALL
Supply and 3 runs of 4.0 sq mm (phase neutral and earth) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing conduit pipe for run of mains as required including labour charges for 16A sockets.Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ABC KENNELS LARGE/SMALL
Supply and fixing of 8 way SPN distribution board with IP-43 protection and as per IS 8623; IS 13032; IEC 61439-3, suitable for 1 no 40 A 2 pole MCB and 6 nos 6-32A SP MCBS as outgoingsconcealed in wall. . Makes for DBs: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/L&T-Newrange and Makes for MCBs: Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ Crabtree-Xpro/L&T-AU including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ABC KENNELS LARGE/SMALL
Supply and fixing of VTPN DB,6 way vertical type MCCB distribution board with IP-43 protection and as per IS 8623; IS 13032; IEC 61439-3, suitable to accommodate MCCB as incomer and single/three pole MCBs as outgoings with 100A, 4 Pole MCCB adjustable, confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 25 KA with thermal magnetic release as incomer with 6 No of 40/63A, 10 KA TP MCBs 'c' curve as outgoing including making connections and labour charges etc., complete concealed in wall. Makes for DBs: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/L&T-Newrange and Makes for MCBs: Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ Crabtree-Xpro/L&T-AU including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ABC KENNELS LARGE/SMALL
Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C.Chamber of 400m x 400m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length as per IS specifications 732/1982 (Part II) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ABC KENNELS LARGE/SMALL
Supply and Run of No. 8 SWG copper wire including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ABC KENNELS LARGE/SMALL
Supply and fixing of 18-20W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of > 120 lumens/watt , PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty.Makes: a) LUMINAIRE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havellsb) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ABC KENNELS LARGE/SMALL
Supply and fixing of...15 W. heavy duty LED Down lighter, suitable for Recessed mounting made of pressure diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGE-Venture of 150 to 265 Volts AC, P.F > 0.9, SurGE-Venture protection: 2KV, THD<10% with high power LED's having efficacy of > 100 lumins / watt, CCT: 3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ABC KENNELS LARGE/SMALL
Supply and Fixing of batten holder/angle holder on existing block with 7W LED Lamp with input voltage 90 to 300V, Colour temparature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base a In lieu of ceiling rose. Makes: Phillips /Crompton / Bajaj / Havells / GM/HPL/Syska /GoldMedal including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ABC KENNELS LARGE/SMALL
Supply of 48" (1200mm) Sweep 5 star rated BLDC (Brush less Direct Current) Ceiling Fan with double ball bearings, input voltage 230V AC converted to 24 V DC, power input not more than 32W , air delivery 210/220 cubic meter/min with remote and without Regulator Makes : : Atomberg(Gorilla GV2 )/ Halonix(Plasma) /Havells(Efficiencia Neo) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ABC KENNELS LARGE/SMALL
Supply and fixing of Modular type 2- Module, Electronic fan regulator hum free step type socket size in the existing switch board. Make : Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ABC KENNELS LARGE/SMALL
Labour charges for fixing of ceiling fan including transportation and giving connections with 23/0060 size, 3 core round flexible copper wire leads of make Finolex/RR kabel/ Havells/ KEI/Polycab/ Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor etc complete including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ABC KENNELS LARGE/SMALL
Supply and erecting 19/20mm steel tube down rod of one meter length with bolts & nuts duly painted with matching colour of fan complete including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work ABC KENNELS LARGE/SMALL
Supply and erecting fan hook of 12/15mm dia M.S. rod / bar grouted in RCC slab with making the slab as original. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CENTRAL KITCHEN
Supply and Fixing of 20mm outer dia medium grade (1.55 mm thick) confirms to IS:9537 part 3 FRLS rigid P.V.C. pipe (ISI marked) Surface pvc pipe with all required accessories for run of mains . Makes : Precision/Universal& Marudhar / VIP/GoldMedal/ Million plast / GM / Sudhakar /Anchor/ Polycab including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CENTRAL KITCHEN
Wiring with 2 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI marked) and 1 run of 1.5 sqmm earth in existing pipe with 6A Modular switch (ISI marked) with cover plate, Ceiling rose, including all labour charges etc., complete for fan and exhaust fan points etc., complete. (for Non Residential Building) Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor. Makes of switches:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CENTRAL KITCHEN
Supply and Fixing of one module PVC blanking plate (safety dummy plate for empty module) for closing the dummy blank modules in the modular switch board for ensuring safety etc., complete. Makes of Switches/Sockets:- Legrand Myrius / Crabtree verona / L&T/ HPL/ Schneider Livia/GM (Zicono/Four Five)/C&S/Goldmedal (Curve)/Million Mway/Logus Platina/ Panasonic Vision/Salzer S90 series/Anchor-Roma. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CENTRAL KITCHEN
Supply and Fixing of 6 Amps modular type (ISI marked) switch, and 6 A 3/2 pin Modular type socket with cover plate on a common switch board Makes of Switches/Sockets:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CENTRAL KITCHEN
Wiring with 2 of 22/0.3mm ( 1.5 Sq.mm) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI marked) in existing pipe with 6A (ISI marked) modular type switches and 6A, 3/2 pin modular type socket with cover plate fixing on existing, separate modular switch box Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor. Makes of Switches/Sockets:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CENTRAL KITCHEN
Supply and fixing of 6-modular metal box with cover frame with 2 nos 6A (ISI marked) modular type switches and 2 nos f 6A, 3/2 pin modular type sockets for LABs & Computer Use. switches/sockets] Makes of Switches/Sockets:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CENTRAL KITCHEN
Supply and Fixing of 3 modular metal box with cover framewith 1 no 16A/20A, 1 in one, modular type power socket outlet with 16A /20A switch (ISI marked) control with following configurations 1)16A Socket -1 No 2)16A Switch -1 No of makes witches /Sockets:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CENTRAL KITCHEN
Supply and run of 3 of 2.5 sq.mm(phase neutral FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing MS conduit pipe for individual ligting circuits as required for switch boards. Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/ Goldmedal/Anchor. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CENTRAL KITCHEN
Supply and 3 runs of 4.0 sq mm (phase neutral and earth) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing conduit pipe for run of mains for 16A sockets.Makes of wires:- Finolex/RR kabel/ Havells/ KEI/Polycab/Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CENTRAL KITCHEN
Supply and fixing of TPN 6 way distribution board with IP-43 protection and as per IS 8623; IS 13032; IEC 61439-3, (8+18 Module) with provision to accommodate the ELCB incomer and suitable for single pole outgoing MCB's in sheet steel enclosure with 40 to 63 A, 10 KA breaking capacity 'c' curve 4 pole MCB as incomer and 18 No of 6 to 32A single pole, 10 KA breaking capacity 'c' curve MCBs as outgoings including making connections etc., complete concealed in wall. (POWER DB). Makes for DBs: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/L&T-Newrange and Makes for MCBs: Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ Crabtree-Xpro/L&T-AU including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CENTRAL KITCHEN
Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C.Chamber of 400m x 400m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length as per IS specifications 732/1982 (Part II) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CENTRAL KITCHEN
Supply and Run of No. 8 SWG copper wire including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CENTRAL KITCHEN
Supply and fixing of 18-20W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of > 120 lumens/watt , PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty.Makes: a) LUMINAIRE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havellsb) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CENTRAL KITCHEN
Supply and fixing of...15 W. heavy duty LED Down lighter, suitable for Recessed mounting made of pressure diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGE-Venture of 150 to 265 Volts AC, P.F > 0.9, SurGE-Venture protection: 2KV, THD<10% with high power LED's having efficacy of > 100 lumins / watt, CCT: 3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CENTRAL KITCHEN
Supply and Fixing of batten holder/angle holder on existing block with 7W LED Lamp with input voltage 90 to 300V, Colour temparature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base In lieu of ceiling rose. Makes: Phillips /Crompton / Bajaj / Havells / GM/HPL/Syska /GoldMedal including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CENTRAL KITCHEN
Supply of 48" (1200mm) Sweep 5 star rated BLDC (Brush less Direct Current) Ceiling Fan with double ball bearings, input voltage 230V AC converted to 24 V DC, power input not more than 32W , air delivery 210/220 cubic meter/min with remote and without Regulator Makes : : Atomberg(Gorilla GV2 )/ Halonix(Plasma) /Havells(Efficiencia Neo) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CENTRAL KITCHEN
Supply and fixing of Modular type 2- Module, Electronic fan regulator hum free step type socket size in the existing switch board. Make : Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T englaze/GM-Zenova/ Goldmedal (GIFA) including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CENTRAL KITCHEN
Labour charges for fixing of ceiling fan including transportation and giving connections with 23/0060 size, 3 core round flexible copper wire leads of make Finolex/RR kabel/ Havells/ KEI/Polycab/ Gloster/V-Guard/HPL/GM/ Million/Goldmedal/Anchor etc complete including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CENTRAL KITCHEN
Supply and erecting 19/20mm steel tube down rod of one meter length with bolts & nuts duly painted with matching colour of fan complete including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CENTRAL KITCHEN
Supply and Transportation of 12" (300mm) Light duty exhaust fan with metalic blades and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air- DB / Orient hill air including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CENTRAL KITCHEN
Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CENTRAL KITCHEN
Supply, transportation & installation of following 300mm x 50mm x 1.6mm of Hot Dipped Galvanized Iron perforated cable trays without cover, including horizontal and vertical bends, reducers tees, cross members and other accessories as required and duly suspended from the ceiling/Wall with suspenders etc., complete. Makes: TATA / JSW. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CENTRAL KITCHEN
Supply installation Testing and commissioning of 2KVA on line UPS system as per IEC 62040-I (Safety), IEC 62040-3 (Performance) for critical IT solutions, fully digital IGBT Converter and Inverter, SCR rectifier with Internal /External isolation transformer from DC to AC, PWM, pure sine wave output, double conversion, output pf 0.8, with paralleling facility, standard communication features/options auto and manual static by pass switch three phase input / Three phase output. acoustic level shall be less than 58dB at 1 mtr distance. Makes: As per list of recommended brands. Makes: Schneider-APC / Zebronics / Numaric . including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CENTRAL KITCHEN
Supply and providing of battery rack for up to 4 batteries (42 AH), Makes: TATA / JSW. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CENTRAL KITCHEN
Supply and fixing of 12V 26 AH SMF battery with 3 years warranty, including wire leads, connections etc complete. Makes: Exide / AMARON / Luminous including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CENTRAL KITCHEN
Supply and laying of Cat 6 UTP cable including all taxes etc complete.Makes: D Link / AMP / Molex / Legrand / Krone. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CENTRAL KITCHEN
3 ffe patch card including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CENTRAL KITCHEN
Supply, Transportation, Installation, Testing and Comissioning of 2MP Dome camera 1/2.8'' CMOS progressive sensor, 2.7 to 13mm Motorized lens, min. illumination 0.006 Lux F1.6 (color), 0 Lux B/w, 50dB S/N ratio; 1/8 ~1/32000 shutter speed, Max 30 fps, IR distance - 40Mtr or better, 120 dB or better WDR, triple stream, Protocal : IPv4, TLS, DHCP, IPv6, TCP / IP, HTTP, SMTP, UDP, HTTPS, RTSP / RTP / RTCP,DNS,SNMP, IGMP / Multicast, NTP, QoS, 802.1X, ICMP, ARP; Line crossing, Face Detection, Motion Detecton, People counting, Intrusion, Loitering, SMD, Tampering; local storage : up to 256GB; Alarm IN & Outputs, Audio IN & Out; ONVIF-S, G, T, M; Security: HTTPS, Digest authentication, User account and password protection,TLS1.2 only, Stream encryption, AES128 / Telnet closed, IP Filter, PCI-DSS compliance; IP67,IK10, UL,CE,FCC, NDAA Compliant including 5 yrs warranty to be obtained from the OEM. MAKES: Bosch / Honeywell / Axis / Mobotix. or equivalent as approved by Department including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CENTRAL KITCHEN
Supply, Installation, Testing and Commissioning of 16 Port, 2GIGA fibreslots (SFP), power budget 250W 10/100/1000 Gigabyte PoE switch with GIGA fibre slots (SFP)ports with uplink ports Make : TP Link / D-Link or equivalent as approved by Department including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work as directed by the Engineer-in-Charge. For Internal Work CENTRAL KITCHEN
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
BOQ for upload Blue Cross balance work.xlsx
TENDER_DOCUMENT • 0.07 MB
Tender document Blue Cross.docx
TENDER_DOCUMENT • 0.18 MB
Download all tender documents and submit your bid