Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹76.1 LAdmitted-Finance | +25.00% | ₹76.1 L | L1 | Admitted-Finance |
| 2 | L2₹1.1 CrAdmitted-Finance | +85.00% | ₹1.1 Cr | L2 | Admitted-Finance |
| 3 | Rejected-Technical | - | - | - | Rejected-Technical Not meeting NIT PQR |
| 4 | Rejected-Technical | - | - | - | Rejected-Technical Not meeting NIT PQR |
| 5 | Not Admitted-Fee/PreQual/Technical BLDG NO XI 74 NEAR VALLARAM KULLANGARA TEMPLE KUNHIMANGALAM KOVVAPPURAM PO KANNUR DIST KERALA 670309 | KANNUR | KERALA | 670309 | - | - | - | Not Admitted-Fee/PreQual/Technical Others-IP Address of R S Enterprises and R S Skyline are same. Further, it is clearly stated that the Proprietor of M/s. R S Enterprises is also the Director of M/s R S Skyline Pvt Ltd, hence according to the NIT terms Pg.714.b, both bids are not admitted. |
Updated dates
Tender Value
₹60.9 L
Closing Date
2 Apr 2026, 11:00 amClosed
Manager
WCM Department, BHEL BAP Ranipet
Renovation and Maintenance of Roof Sheets and Side cladding with structural painting for Fan Testing System Shop Factory at BHEL BAP Ranipet
2026_BHEL_59483_1
975525025E
Open Tender
Civil Works
150 days
Ranipet
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
Exempted
15 Apr 2026
19 Mar 2026
2 Apr 2026
19 Mar 2026
2 Apr 2026
19 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 10(13.99) Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : (13.99.1) One or more coats on old work. | |||||
| 20(13.50) Applying priming coat : (13.50.3) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works | |||||
| 30(15.28) Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: (15.28.1) G.S. Sheet | |||||
| 40(15.28) Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: (15.28.2) Asbestos cement sheet | |||||
| 50(15.60) Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-incharge, beyond 50 m initial lead, for all leads including all lifts involved. | |||||
| 60(12.50) Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | |||||
| 70(12.51) Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete: (12.51.1) Ridges plain (500 - 600mm) | |||||
| 80(12.51) Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete: (12.51.6) Gutter (600 mm over all girth) | |||||
| 90(12.41) Providing and fixing on wall face unplasticised Rigid PVC rain water pipes confirming to IS 13592 Type A including jointing with seal ring conforming to IS 5382 leaving 10mm gap for thermal expansion, (i)Single socketed pipes. (12.41.2) 110 mm diameter | |||||
| 100(12.42) Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. (12.42.1) Coupler (12.42.1.2) 110mm | |||||
stage.html
html • 0.03 MB
techsummary_64377.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.57 MB
BOQ_64377.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid