Loading…
Loading…
Tender Value
₹55.6 L
EMD Value
₹1.1 L
Closing Date
30 Jun 2026, 2:30 pm
Electrical work connection to 1.Provision of Interlocking LC gates irrespective of TVU on account of Restricted visibility in BSB Division with RTU & Power Supply arrangement (Total 08 No. LC).2.Provision of Interlocking of LC gates having more than 20000 TVU under jurisdiction of SrDSTE I BSB with RTU & Power Supply arrangement (BNRS-HDT-7C, GYN-BYH-42A B2, GYN-BYH-46A B2 & BYH-HDK-49B B3) (Total 04 No. LC).3.Provision of Interlocking of LC gates having more than 20000 TVU in BSB Division with RTU & Power Supply arrangement. (DDA-MHC-4C & MAU-SHG-31C) (Total 02 No LC).4.Provision of Interlocking of LC gates having more than 50000 TVU in BSB Division with RTU & Power Supply arrangement (SQW-RTU-35 Spl & POU-KKT-64 Spl) (Total 02 No. LC)
E-Tender-L-18-26-27
E-Tender-L-18-26-27
Open
4 Months
Mau, Uttar Pradesh
₹0
₹1.1 L
8 Jun 2026
8 Jun 2026
16 Jun 2026
IS:9537/Part III/ 1983 (Latest Version) with accessories, junction box etc. including clamping etc. as per site requirement.
Description:- Supply, recessing and fixing of PVC conduit pipe 25 mm (Medium) dia conforming to
making chase, plastering/ clamping etc. and making the wall good in and original condition with white washing/ colouring etc. as per site requirement.
Description:- Supply and wiring of 2.5 sq.mm PVC insulated multi stranded copper conductor
(recessed/surface) PVC conduit pipe for wiring of point wiring/circuit wiring/ sub main/ main as required including connection, testing and commissioning as required.
Description:- Supply and wiring of 4.0 sq.mm PVC insulated multi stranded copper conductor
(recessed/surface) PVC conduit pipe for wiring of point wiring/circuit wiring/ sub main/ main as required including connection, testing and commissioning as required.
VARANASI DIVISION-ELECTRICAL/NORTH EASTERN RLY
single core FR cable conforming to IS:694/1990 (Latest version) and drawing in laid (recessed/surface) PVC conduit pipe for wiring of point wiring/circuit wiring/ sub main/ main as required including connection, testing and commissioning as required.
Description:- Supply of PVC insulated multi stranded copper conductor single core HRFR cable 1.5
pipe for Earth Wire as required as per technical specification including connections, testing and commissioning.
including connections, Testing and commissioning as per Tech. Specification.
Description:- Supplying and fixing surface/ recess mounted, vertical type, duly powder coated
MCB- 1 No, 32 A SP, MCB- 2Nos, 16 A SP, MCB- 1 No 10 A SP, MCB- 1 No, inclusive of 100A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB as required.
Description:- Supply, Installation, Testing and Commissioning of SPN MCB Distribution Board 8 Way
No. MCB 02 Pole 40 Amp 10 KA 230V as incoming and 06 Nos. MCB of 6-20 Amp single pole 10 KA
Description:- Supply, Installation, Testing and Commissioning of Cable Junction Box of size 200 mm
Degree of Protection IP65/IP 66 with metric knockouts for cable entry with 5 Nos. terminal block set for cable of size 16/25 Sq.mm, bracket and cable glands complete in all respect.
Description:- Supply of LED Tube light with fitting power rating (in watt): 24, Lamp Efficacy (Lumen/watt) minimum :100 Colour Temperature (in K): 6500, Ingress protection in IP: IP 20,
100-300, Power factor: >/= 0.9, Warranty for free replacement (Years): 1 year, installation, connection with twin core PVC insulated flexible copper conductor cable of size 14/0.193 mm. including testing and commissioning.
Description:- Supply, installation, testing and commissioning of Ceiling fan 1200 mm sweep, Motor: Brushless DC, power consumption (W): 25-30, Winding: Copper, Speed control: 5 step with Remote,
340, Service Value >/= 7.5, conforming to IS:374/1979 and IS:374/2019 or latest, Conformity to Safety Standard IS: 302/1979 connection with twin core PVC insulated flexible copper conductor cable of size 14/0.193 mm including earthing.
Description:- Supply, installation, testing, commissioning of ISI Marked Exhaust fan, sweep
conforming to Indian Standard: IS 2312 (latest), suitable for single phase, 50Hz, AC, connection with 2.5 sq.mm copper conductor and fixing/grouting the nut and bolts of suitable size & including making the hole on wall in original condition i.e. colouring etc. as per site requirement.
hardware material for fixing.
50x6 mm, bolts, nuts and washers etc. (M.S. clamp as per site requirement)
cover plate 6 module white and flush metal box size 8"x 3", 6 module.
cover plate 8 module white and flush metal box size 9"x 3", 8 module.
cover plate 12 module white and flush metal box size 8"x 6", 12 module.
19 VARANASI DIVISION-ELECTRICAL/NORTH EASTERN RLY 19 Description:- Supply, Erection, Testing and Commissioning of following Modular Type switch 6/10A (1-way) complete in all respect.
outlet 2/3 Pin 6/10A complete in all respect.
Electronic Fan Regulator complete in all respect.
Version) including connections, Testing & commissioning as per site requirement.
Description:- Supply, fixing, testing & commissioning of hot dip galvanized octagonal pole 5 mtr.
foundation (1:2:4) etc. the pole shall be complete with holes, anchor bolts, bottom plate etc. As per Tech spec/site requirement IS/IE rules of following type. Weight of the pole should not be less than
Description:- Supply, fixing, testing & commissioning of hot dip galvanized octagonal pole 5 mtr.
foundation (1:2:4) etc. the pole shall be complete with holes, anchor bolts, bottom plate etc. As per Tech spec/site requirement IS/IE rules of following type. Weight of the pole should not be less than
bracket complete with two nos. clamp nuts, bolts etc. suitable for mounting of LED street light fitting on tubular poles including bending the pipe to the required shape.
Description:- Supply, replacement, fixing, testing, connecting and commissioning of 72 Watt or above LED street lights fittings as per IS:10322. LED Luminaries:-(1) A complete LED lighting unit consisting of a light source and potted driver together with parts of distribute lights, to position and protect the light source, and to connect the light source to a branch circuit. The light source itself may be an LED array and LED module, or an LED lamp. (2): -Supplied LED luminaries shall confirm to IS:16101 (2012) IS :16106(2012). Light Source (LED) in the Luminaries should be of make: - (1): - NICHIA/ CREE/OSRAM/ SEOUL/ PHILIPS/LUMILEDS /LEDNIUM. (2): -LEDs to IS:16105(2012). IS:16108(2012), IEC:62471. Type LED: - High power LED, SMD (Surface Mounting device)/COB (Clip on board). 1.Input operating voltage: -105-295 V AC.2: - Normal Voltage-220V AC, 3. Driver type: constant current driver with short circuit protection. 4.LED life: - >50000 burning hours. 5. Depreciation: - 30% max. after 50000 burning hours. 6.Control of distribution:-Full cut off. 7.Surge
10.Beam angle:>=140 degree along with road and >=80 degree across the road. 11.Colour temperature:5000-6500K. 12. Colour rendering index (CRI):>=75. 13.Ingress protection: IP-66.14. Lumen output: >120 lumens/watt.15.Power factor:->0.95. 16.Total harmonics distortion (THD):- <15%.17. Lamp cover: Toughened glass or UV stabilized poly carbonate. 18.Finishing: Power coated/Anodized. 19.Secondry optics: poly carbonate reflector/ poly carbonates lens. 20.Construction of housing: extruded aluminum/ CRCA/Pressure die cast aluminum. 21.Mounting: Suitable for existing pole/ Truss/ Lantern mounted. 22.Certificate: Firm to submit LM 80(In respect of LED used) & LM79 (In respect of luminaire used) test certificate from National/ International accredited Laboratory and OEM certificate for compliance of BIS/IEC. 23.Warranty: Firm to submit warranty certificate for five year along with the supply. All fittings shall be fitted with new suitable bend/elbow with clamp and proper nut and bolt and connection with twisted twin flexible cord of minimum size 16/1 mm copper conductor as per relevant technical specification. Material parameters must remain unchanged during entire warranty period.
complete with all accessories. (LED luminaires should conform to min IP:66) including erection, testing, fixing & commissioning of LED street light fitting on pole/wall/structure.
with erected pole or wall as per technical specification for passing cable of different size.
with erected pole or wall as per technical specification for passing cable of different size.
VARANASI DIVISION-ELECTRICAL/NORTH EASTERN RLY
and 40 mm dia with masonry enclosure on the top with RCC Cover including earth connection to equipment with 4 mm dia G.I. wire in 15 mm dia G.I. pipe and using salt and charcoal for pipe earth electrode as per drawing L/16/STD/86 as enclosed as per IS 3043/1987 (latest Version).
connection for earthing as required.
TI/SPC/PSI/CLS/0020(12/02) with A &C slip no-1 to 4 or latest.
Description:- Supply, testing of connection box made of high quality thermoplastic polycarbonate enclosure, weatherproof, corrosion proof, dust proof, jet water proof, fire retardant and self- extinguishing, halogen and silica free, non-toxic material with internally embedded gasket made of
63/200 Amp fuse( as advised by Railway site incharge) and suitable terminal for incoming one no. and outgoing one no. of 2 core 70/150 sq mm Aluminum Armored cable for pole mounting , top and bottom cable entry. Overall approx. Dimension 360mmx500mmx180mmcomplete in all respect with 63/160A DP MCCB as incoming. (as advised by Railway site incharge)
Description:- Erection, Installation, and commissioning of connection box made of high quality
fire retardant and self-extinguishing, halogen and silica free, non-toxic material with internally embedded gasket made of polyurethane with degree of protection IP 65 in accordance with all necessary accessories to complete the work in all respect.
Description:- Supply , testing and commissioning of sheet steel clad dust and vermin proof floor mounted type Junction box of dimension at least (Length-0.75Mtr, Height-0.60 Mtr, Width-0.50 Mtr) with 14 SWG CR sheet for main supporting frame and 16 SWG CR sheet for doors & covers including
and other hardware with RYB Led indicator, Danger board, end termination of existing cables in junction box with lugs, glands and hardware., Cleaning and painting of synthetic enamel spray paint (Double coating) including Making Plinth (Brick work) of size 0.8x0.6x0.6 Mtr for Junction box as per direction of Engineer In-charge at site
Description:- Supply, Fabrication and erection of fabricated structure of angle iron 35x35x5 mm /
arrangement of different equipment complete with clamp, nut bolt etc. complete in all respect as per site requirement.
Description:- All work pertaining to Horizontal Directional Drilling (HDD)/Boring and trench less cabling. It includes supply, transportation and insertion of self-lubricated HDPE pipe and laying of
cables will be crossed. The depth of horizontal boring should be 3 mtrs from rail flange/road level. This item will be used for track crossing of running lines.) By using self-lubricated HDPE pipe of 103.50 mm inner dia and 120 mm outer dia (PN-6) as per IS:4984 or latest in the bore and the laying of cables in the track/road. (HDPE Pipe shall be supplied by Contractor.
arrangement. Cable laying work shall be governed by IS :1255/1983. (cable supplied by Railway)
Description:- Laying & fixing of one number PVC / XLPE Insulated & PVC sheathed power cable of
conductor cable direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as req. Cable laying work shall be governed by IS :1255/1983. (cable supplied by Railway).
Description:- Laying & fixing of one number additional PVC / XLPE Insulated & PVC sheathed
exceeding to 400 sq mm in ground in same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc. as req. Cable laying work shall be governed by IS :1255/1983.(cable supplied by Railway).
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderDocument.pdf
ATTACHMENT
Explanatorynote.pdf
ATTACHMENT
Advancecorrectionslipno.11.pdf Advance correction slip no11
ATTACHMENT
Advancecorrectionslipno.11.pdf
ATTACHMENT
Download all tender documents and submit your bid