Construction of Nursing College at STNM Multispecialty Hospital complex, Sochakgang, Sichey, Gangtok District.

Amount

(A) :- NURSING COLLEGE

Earth in excavation in mixed soil in foundation trenches i/c dressing of sides, disposal of excavated earth upto 30m lead and 1.5m lift all complete.

Providing & Laying in position cement concrete of 1:2:4 mix. (1 cement, 2coarse sand,4 graded stone aggregate of 20mm & down size) including compacting curing etc. all complete.

Filling inside plinth in building works with 23 cm layers, consolidated to 15cm including watering, ramming etc. all complete.

Providing and laying damp-proof course 50mm thick waterproof chemical mixed with cementconcrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from naturalsources : 4 graded stone aggregate 20mm nominal size derived fromnatural sources).

P/L 1:1:2mix reinforced cement concrete ia all R.C.C works i/c curing, compacting etc all complete.

Providing, fixing and removing form work for casting R.C.C items as indicated below: (with locally available)

Columns

Beams

S/B/B in position tor steel and mild steel reinforcements in all R.C.C works i/c cost of binding wires etc all complete.

Providing and Laying Plum concrete in 1:2:4 c.c. (1cement, 2coarse sand, 4clean hard graded stone chips of 20 mm down nominal gauge) with 50% clean hard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction of Engineer in Charge.

Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately)

Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work

Providing and Laying 15 mm thick cement plaster of specified mix of 1:3 in single coat including finishing even and smooth and curing etc all complete.

Providing and Laying white or colored glazed vitrified tiles Pearl (white, marvel Atlanta, jet black etc or equivalent) in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.

Providing and Laying flooring with granite marble stone slabs 20mm thick granite stone slabs flooring of size not less than 1.0 sqm of 20mm thick laid over20mm (average) 1:4cm thick bare laid cement concrete and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete.

Providing and Laying 20mm thick granite stone in Risers of steps, skirting and pads, walls, pillars etc laid on 10mm thick base c.m. 1:3 joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete

Providing and Laying white or colored glazed tiles anti skid ( elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant or equivalent in flooring, treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.

Providing and Laying white or colored or ceramic glazed tiles of size 200mm x 300mm luster printed ( loreno, bronzo, colubia or equivalent) in skirting, risers of steps and Dados on 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry.

Providing & Laying 40 mm thick Red oxide flooring with with Recorn 3S polyester fiber (anti seepage/cracking) under layer 30mm thick c.c. 1:2:4 and top layer of 10mm thick plaster of red oxide and cement mix cement mortar 1:3 finished with a floating coat of neat similar cement red oxide mix including cement slurry, rounding of edges and junctions, strips and curing etc, all etc complete.

Providing/ fitting/ fixing of dressed sal timber in all types of frames complete.

Providing fitting and fixing in position of fully paneled shutters in windows and doors of champ timber or equivalent including steel butt hinges screws 12mm thick panels etc complete.

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)

Providing and fixing M.S grills in timber frames of windows with M.S flats with nuts, bolts, and smooth finishing of welded joints/surface with Grills weighing 8.00Kg/sqm as per the direction of Engineer - in- Charge all complete

Providing and fixing stainless steel ( Grade 304) railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing, polishingand making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge,(for payment purpose only weight of stainless steel members shall beconsidered excluding fixing accessories such as nuts, bolts, fasteners

Providing & fixing brass bright finished butt hinges with necessary screws etc. complete.150mmx31mmx4mm

Providing, fitting & fixing sliding door bolts of size 300mm x 16mm with nuts and screws etc. complete.Brass (Chromium plated)

Providing, fitting & fixing Tower bolts 300mm x 10 mm with necessary screws etc. complete.Brass (copper oxidized)

Providing, fitting & fixing Handles 125 mm size with necessary screws etc. complete.Brass (Bright finish)

Supplying, fabricating, fitting and fixing tubular truss including putty, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc complete in curve shaped Sikkim- style roofing as per the standard specification and design and as per the direction of Engineer - in- Charge all complete. Steel tubular truss for Roof

Providing, fitting, fixing of 24 BWG pre-painted (HULLAS) sheet roofing with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with epoxy in each bolts (8 to 10 gm per bolt) including coat of approved steel primer and two coats of approved paint, on overlapping of sheet excluding carriage complete.

Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Pre-painted HULAS Sheet fixed with G.I, J or L hooks bolts and nuts 8mm dia Limpets, Bitumen washers complete.

Providing fitting and fixing 16mm thick valley of 90cm overall width in plain Pre-painted HULAS sheet class I fixed with GI J or L hooks, bolts and nuts 8mm dia GI limpet and bitumen washers complete.

Providing fitting and fixing 30cm deep 24BWG Pre-painted HULAS sheet eaves board including (50x25mm) dressed sal timber beading and M.S. rod brackets all complete.

Providing & fixing 15cm wide 45cm overall semicircular pre-painted (HULLAS) sheet (Class I) gutter with iron brackets 40x3mm size, bolts filled with epoxy in each bolts, nuts (8 to 10 gm per bolt), washers etc including making, connection with rain water pipes.

Providing / Fitting / Fixing 25mm ceiling in wooden frames panisaz or equivalent including frame work excluding the cost of polishing and priming all complete. With imported timber

Providing, fitting, fixing of 24 BWG GP sheet roofing by making corrugation of 50mmx50mm x50mm on both side with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with white bad including coat of approved steel primer and two coats of approved paint, on overlapping of sheet excluding carriage all complete

Providing and fixing anodized aluminum works for doors, windows, ventilators and partitions with extruded built up standard tubular or other section of approved make confirming IS 733 and IS 1285, fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners i/c necessary filling up the gaps at junctions, at top, bottom and sides with required PVC / neoprene felt, etc. Al. section shall be smooth, rust free, straight, mitered and joined mechanically wherever required i/c cleat angle, Al snap beading for glazing / paneling CP brass / stainless screws, all complete as per design and drawings and the direction of the Engineer - in - Charge.

Providing and fixing pre-laminated sheet three layer medium density (exterior grade) particle board grade - I type - II confirming IS 12823 bonded with phenol formaldehyde synthetic resin of approved brand and manufacture in paneling fixed in Aluminum doors, windows, shutters and partition frames with CP brass / stain less steel screws etc. complete as per architectural drawings and direction of Engineer - in- Charge.

Providing and fixing glazing in Al. doors and windows ventilator shutters and partitions etc. with PVC / neoprene gasket with CP brass / stain less steel screws etc. complete as per architectural drawings and direction of Engineer - in- Charge

Providing and laying plaster of paris putty of 2mm thick over plastered surface to prepare the surface even and smooth all complete( Both in Internal & External surface)

Providing and painting with Plastic Emulsion paints two or more coats on New surface of required shade to give an even shade including brushing the surface clean of all dirt dust and smoothened by sand paper etc complete.

Providing and Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc and sand papering and filling the scratches complete on New surface.

Providing and French spirit polishing two or more coats including cleaning of the surface to make smooth and free from dirt and dust and sand papering etc. on new look complete.

Providing & applying priming coat with ready mixed Red oxide, zinccromate primer on steel/galvanized Iron steel works including preparation of the surface complete.

Providing and painting with ready mixed paint of approved quality & shade with two or more coats to give an even and smooth shade including cleaning the surface complete on new surface.

Provision for providing fitting and fixing of Sikkimese Vernacular style and feature in exposed column in traditional motive and painting all complete as per architectural drawing and engineer in charge

Providing and laying 15mm thick cement plaster of 1:3 mix in single coat for Sikkimies Heritage Design n Exposed external walll surface including carving, painting designing in traditional motive all complete as per Architectural drawing & Engineer in charge

Providing and laying 15mm thick cement plaster of 1:3 mix in single coat for Sikkimies Traditional Design (Dug, Bhumpa, Dhungkar, Gyaltsen, Sernya, Pema, Palbheu and Khorlo) in External Surface of the structure including carving, painting with ready mixed paint of approved quality & shade with two or more coats to give an even and smooth shade including cleaning the surface complete on new surface, excluding the cost of cement, sand, carriage of materials, Scaffolding but including the cost of primer and enamel paint, all complete.

Providing and laying of Stone cladding with cement mortar of :1:3 mix and giving the good finish all completed as per the direction of engineer in charge

Providing, fitting and fixing in position collapsible steel shutter with vertical channel (20x10x2)mm and braced with flat iron diagonals (20 x 5)mm size with top and bottom rail of T-iron (40x40x6)mm with 40mm dia steel pulley complete with bolts, nuts, locking arrangements, stoppers and handles including applying of priming coat of approved steel primer as per the direction of Engineer - in- Charge all complete:

Haulage for stock material via Surfaced Road for the distance of 10 km excluding loading and unloading all complete.

Loading and Unloading of Cement or Steel

Haulage for Fine Aggregate via surfaced road for the distance of 50km excluding loading and unloading all complete.

Haulage for Coarse aggregate, via Surfaced Road for the distance of 50km excluding loading and unloading all complete.

Haulage for throwing away of excavated earth via Surfaced Road for the distance of 10 km excluding loading and unloading all complete.

Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/ Kanker/ Moorum/ excavated earth.

(B) :- SITE LEVELLING AND PROTECTIVE WORKS

Excavation in soil in hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead up to 1000 meters

Excavation in soil in hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 50 meters.

Providing & Laying in position cement concrete of 1:2:4 mix. (1 cement, 2coarse sand, 4 graded stone aggregate of 20mm & down size) including compacting curing etc. all complete.

Providing & laying Plum concrete in 1 : 2 :4c.c. (1 cement, 2 clean coarse sand, 4 clean hard graded stone chips of 40 mm down nominal gauge) with 50% clean hard stone of sizes not execeeding 15 cm including shuttering, compacting and curing complete.

Providing and Laying of 60 mm Paver Block flooring with cement mortar of 1:4 base laid over and jointed with black cement slurry mixed with pigment to match the shade of the slab including preparation of sub surface with sand i/c stabilization of earth , providing lean concrete all complete

Filling with available excavated earth in trenches, plinth and side of foundation in building works with layers not exceeding 20cm in depth including consolidation of each layer by ramming, watering etc, all complete.

Providing and fixing MS Steel railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing, polishingand making curvature (wherever required) and fitting the same with necessal nuts and bolts complete, i/c fixing the railing with necessary accessories including applying priming coat and painting all complete

Providing box drain of 30 cm (ht) x 45 cm (width) internal dimension with 1:2:4 Plum concrete (20mm & down) in side walls thickness of 23 cm (hill side) and 30 cm (road side) and 1:3:6 (20 mm & down) base concrete of thickness of 15 cm with standard specification over 15 cm stone soling including providing & laying guard stones complete, as per the direction of the Engineer in Charge.

Providing Fitting and Fixing of Angle iron Grating of 50 mmx 50mm x 6 mm including welding fixing with nut and bolt and applying red oxide primer and painting all complete as per the direction of Engineer in charge

Haulage for stock material via Surfaced Road

Loading and Unloading of Cement or Steel

Haulage for Fine Aggregate via surfaced road

Haulage for Coarse aggregate, via Surfaced Road

Haulage for throwing away of excavated earth via Surfaced Road for the distance of 20 km excluding loading and unloading all complete.

Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/ Kanker/ Moorum/ excavated earth.

Misc works (Throwing of spoils)

(C ) :- WATER SUPPLY AND SANITATION

Providing, Fitting and fixing GI pipe of medium class, (excluding trenching, refilling, compacting and the cost of fittings) all complete

Providing, Fitting and fixing PVC 32mm dia pipe complete with GI fittings and clamps including cuttings and making good the walls etc. on wall for wash basin connector to main line

Providing, Fitting and fixing brass fittings of approved quality and size complete

Bib Cock 15 mm dia

Stop Cock 15 mm dia

Gateway valve 20 mm dia

Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (Esco/Equivalent)

Connecting Pipe

Basin Mixer

Providing and placing on terrace high density polyethylene water storage tank with man hole lid and suitable locking arrangement including making holes for inlet, out let and ball cock including testing etc. all complete: (Sinter or equivalent

2000 litre capacity

Providing, Fitting and fixing ball valve ( Brass) of approved quality complete with high or low pressure with plastic floats:

SANITARY FITTINGS

Providing, fitting and fixing white vitreous china pedestal (European type) water closet (W.C) pan with seat and lid, with C.P. brass hinges, 10ltr low level cistern with fittings and brackets 40mm flush bend, 20mm overflow pipe with specials, including Providing and painting and making good the wall and floors as required all complete: W.C. pan European One pice (Starwhite) CAT NO 92008

Providing, fitting and fixing white vitreous china flat back or wall corner type lipped front urinal basin of size 440x315x325 mm with 5 ltr automatic flushing cistern with C.I. brackets, GI flush pipe and spreaders with brass unions and G.I. clamps including cutting and making good the walls and floors as required all complete

Range of 1 Urinal basin

P/F stain less steel kitchen sink with CI brackets, CP brass chain with rubber plug 40mm CP brass waste, CP brass tap etc complete i/c the fittings, cuttings and making good the wall wherever required.

Providing and Fitting Pedestal white colour for of Hind Vitreous wash basin complete.

BATHROOM FITTINGS

Providing and fitting chromium plated toilet paper holder including the making holes and fixed to timber cleats with CP screws washer etc. all complete:.

Providing, fitting and fixing Beveled gauge mirror of superior glass with 6mm A.C. sheets ground and fixed to timber cleats with CP screws, washer etc complete.

Providing, fitting and fixing. of chromium plated soap dish with necessary screw etc all complete.

Providing, fitting and fixing towel rail of chromium plated brass complete with brackets fixed to the timber cleats, CP brass screws complete.

SOIL WASTE / VENT PIPE FITTINGS (ISI) Providing, fitting and fixing soil waste and vent pipes including testing etc complete.

100 mm dia. PRINCE / SUPREME

Providing, fitting and fixing bends of various types plain or a band with access door, insertion rubber washer 3mm thick bolts and nuts complete SCI or centrifugally cost spun sands pipes

100 mm dia. Supreme / Prince

Providing, fitting and fixing double equal junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.

100 x 100 x 100 x 100 mm Supreme / Prince

SEPTIC TANK, SOAK PIT

Excavation in soil in hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 50 meters.

Providing & Laying in position cement concrete of 1:3:6 mix. (1 cement, 3 coarse sand,6 graded stone aggregate of 20mm & down size) including compacting curing etc. all complete.

Providing & Laying in position 1:1.5:3 mix (1cement, 2 coarse sand 4 graded stone aggregate 20mm and down nominal gauge) reinforced cement concrete of nominal mix excluding the cost of form work, finishing & reinforcements of cement) as per the direction of Engineer in Charge.

Providing, fixing and removing form work for casting R.C.C items as indicated below: (with locally available)

Floor slab, roof slab, landing, balcony & access platform.

Supplying, bending and placing in position of Tor steel reinforcement in all R.C.C works i/c cost of binding wires all complete.

Haulage for stock material via Surfaced Road

Loading and Unloading of Cement or Steel

Haulage for Fine Aggregate via surfaced road

Haulage for Coarse aggregate, via Surfaced Road

Haulage for throwing away of excavated earth via Surfaced Road for the distance of 10 km excluding loading and unloading all complete.

Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/ Kanker/ Moorum/ excavated earth.

SECTION 'A' :- ELECTRICAL INTERNAL WIRING.

Wiring for light/Fan/Call bell & 6 A plug point with 1.5 sqmm HR FRLS (Havells/Polycab/RR Cable) PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1.5 sqmm HR FRLS PVC insulated copper conductor single core cable as required.

Wiring for sub-main for light/fan/call bell & 6 amps plug points with 2.5 sqmm HR FRLS (Havells/Polycab/RR Cable) PVC insulated copper conductor single core cable in Existing recessed alkathine pipe and earthing the point with 2.5 sqmm HR FRLS PVC insulated copper conductor single core cable etc.as required.

Wiring for 16 A plug point with 2.5 sqmm HR FRLS (Havells) PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 2.5 sqmm HR FRLS PVC insulated copper conductor single core cable as required.

Wiring for sub-main for 16 amps plug points with 4.0 sqmm HR FRLS (Havells) PVC insulated copper conductor single core cable in PVC casing caping system and earthing the point with 4.0 sqmm HR FRLS PVC insulated copper conductor single core cable as required.

Wiring for sub-main with 6.0 sqmm HR FRLS (Havells/Polycab/RR Cable) PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 6.0 sqmm HR FRLS PVC insulated copper conductor single core cable as required.

Supplying & fixingConduit inspection bend 1/2",3/4" 1"

Supplying & fixingConduit inspection Tee 1/2",3/4" & 1"

Supplying & fixingConduit inspection round 1/2",3/4" & 1"

Supplying & fixing of MS Box as Junction purpose 100mx 150 mm

Supplying & fixing of MS Box as Junction purpose 200mx 150 mm

Supplying & fixing Bakelite Sheet 125 mm x 175 mm

Supplying & fixing Bakelite Sheet 225 mm x 175 mm

SECTION :- `B' SWITCH , SOCKET & ACCESSORIES Supplying & fixing 06 amps 1 way FT switch on white moduler plate and metal flux box (Mosaic) including connection etc. as required.

1 no. 06 amps FT switch with 1 no white 1 moduler plate and 1 moduler metal flux box.

2 no. 06 amps FT switch with 1 no white 2 moduler plate and 2 moduler metal flux box.

3 no. 06 amps FT switch with 1 no white 3 moduler plate and 3 moduler metal flux box.

4 no. 06 amps FT switch with 1 no white 4 moduler plate and 4 moduler metal flux box.

6 no. 06 amps FT switch with 1 no white 6 moduler plate and 6 moduler metal flux box.

8 no. 06 amps FT switch with 1 no white 6 moduler plate and 6/8 moduler metal flux box.

Supplying & fixing 1 no. Legrand(Mosaic) 16 amps socket, & 16 amps switch,white plate (6/8 module) & Metal flux box (6/8 module) including connection etc. as required.

Supplying & fixing 1 no. 06 amps socket with 1no. 06 amps switch, 1 no. 3 module white plate & 1 no. 3 module metal flux box (Legrand) including connection etc. as required.

1 no. 06 amps Bell Push with 1 no white 1 moduler plate and 1 moduler metal flux box.

Supplying & fixing 1 no. 2 way switch with 1 no 1module white plate & 1 no 1 module metal flux box (Legrand) including connection etc. as required.

SECTION 'C' :- LIGHT FITTINGS AND ACCESSORIES

nstallation,testing&commissioning of Flourescent lightfitting,decorative electronics triplite for wall/ceiling mounting Philipsorequivalent with 1 x TL'D 36w/40w

Supplying & fixing LED tube light fitting 22 watts 4 ft including connection etc. as required..

Supplying & fixing recessed mounted LED panel light fitting 2ft x 2ft 36 watts including connection etc. as required.

Supplying & fixing recessed LED fitting 10 watts including connection etc. as required

Supplying & fixing Calling bell (Ding-Dong) Anchor with 100mm x 150mm PVC box including connection etc. as required.

Exhaust Fan (Anchor/Bajaj/Khetan or equivalent make) 12"heavy duty with complete accessories as required.

LTDB 800 A

1 No. 32A TP MCCB breaking capacity 35 KA with built in Thermo Magnetic Release having Relay setting 16-25A

Supplying & installing MCB isolator (Havells/Legrand make) Double pole 40 Amps

Supplying & installation MCB distribution board Double Door/Single door (Havells /Legrand make).

16 ways SPN(Double door)

Supplying & Installation of Miniature circuit breaker (Havells)

Single pole 6 Amps

Single pole 16 Amps

Supplying & installing (Havells/Legrand) Changeover Switch

Four pole 100 amps / 415 V

Providing & earthing 2 mtr long ASHLOK make encapsulated pipe system (Pipe in pipe technology) maintenance free safe earthing electrode Model T 19 ,outer dia of pipe 50mm & inner pipe dia 25 mm and 1 bag back fill chemical compound.

Providing & installing Copper tube type 1m long lightning arrestor having prongs at the top of the arrestor and base plate with nuts & bolts.

Providing & laying 25mm x 5mm copper strip for looping earth from lighting arrestor to earthing point.

Providiong & laying 6/8 SWG cu wire from main dist. Pannel to distribution system of the building.

Excavation of 0.45 x 0.90 x 1.00 m cable trench in mix soil & re-filling with available excavated earth and providing Bitumen on the top of the trench.

Rigid U PVC pipe as per IS 4985-2000 working pressure 6 kgf/cm2 (FinOlex) 50mm Dia.

Providing & laying 1.1 KV grade PVC insulated aluminium armoured conductor cable on surface of the wall of building with required size of aluminium shadle and screw etc. as required.

2 core 10 sqmm

3.5 core 35 sqmm

SECTION ( E ) STREET LIGHT

8.5 Mtrs. Long 410-SP-21 swaged type steel tubular pole with CI base plate & cap, double part ( Nuts & bolts type) working load 185 Kgs

Red oxide metal primer (NEROLAC OR equivalent) 2.5 lts/ structure.

Aluminium paint (NEROLAC OR equivalent)

Supplying and fixing MS junction box including PVC single core 2.5 sqmm Aluminium wire(Havells make or equivalent)

HID Lamp, HPSV 250 W roadway lighting luminaire Integral, Cast aluminium with side reflactors complete set Bajaj make or equivlent

Providing and earthing 2 mtr.Long ASHLOK make encapsulating pipe system (Pipe in pipe technology) maintanence free safe earthing electrode Model T 19, outer dia of pipe 50mm & inner pipe dia 25mm and 1 bag back fill chemical compound.

Concerting of 8.5 Mtrs. Lattice structure/swaged steel tubular pole in 1:4:8 cc in 0.9x0.9x1.50 mtrs pit, construction of parapet 0.35x0.475x0.153 mtrs in 1:3:6 cc i/e 12mm cement plaster of parapet in 1:4 mix

1.1 KV, 2 Core x 16 Sqmm, PVC/XLPE InsulatedHeavy Duty Power Cables for working voltage upto & including 660/1100 Volts CONF. To IS: 7098 (Part-1) with latest amendment Aluminium Conductor.

SECTION ( F) DG GENERATOR SET, LED SCREEN , PROJECTOR & AUDIO VISUAL SYSTEM

Providing and Fitting of DG Generator Set of 30 KVA including Making the Connection with main line of building all complete ( Power Back up )

Providing and Installation of LED SCREEN including fitting and making connection all complete as per the direction

Providing and Installation of Projector including fitting and making connection all complete as per the direction

Provision for Installation of PA system in Conference Hall all complete as per the direction of engineer incharge

Provision for Installation of Audio Visual System all complete as per the direction of engineer incharge

Erection Charge

Transportation Charge

ESTIMATE FOR SUPPLY,INSTALLATION,TESTING AND COMMISSIONING OF FIRE ALARM AND DETECTION SYSTEM OF NURSING COLLEGE AT STNM COMPLEX,GANGTOK

Micro Controller Based 16 Zone Fire Alarm Panel. Compact design good looking Panel.Fully Confirm IS 2189. a. Zone Wise Fire Fault LED Indication. b. Zone Isolation Facility. c. Mains on, System On, Charger on, visual indications. d. Auto dialler attachable facility e. External s/w for reset, Silence, Lamp test. f. External s/w to test each zone fire, open, short status manually. g. Inbuilt Buzzer. h. 16x2 Line LCD Display. i. Inbuilt Battery Charger & Battery Space.

Conventional Photo electric Smoke Detector

Conventional Heat Detector

Hooter/Sounder

Manual Call Point

Detector Base

2x1.5sq.mm armored FRLS cable

12V/14AH Battery for Fire Alarm Panel back-up.

wire clip for armored cable

FIRE PUMPS, PUMP ROOM Electrical Fire Pumps Providing and fixing horizontal split casing single/multi stage, single/multi outlet pumping set with bronze impeller with C.I. body and connected by a flexible coupling to a totally enclosed fan cooled induction motor mounted on a common structural base plates with all pump accessories complete as per specifications including pressure gauges with gunmetal isolation valves and anti vibration pads, motor to be suitable for 415 volts, 3 phase, 50 cycles A.C. supply (Specifications as per fire fighting requirements and on the pattern of TAC or local authority approval) as per instruction and following specifications:

Main fire Pump Ø Capacity:- 2640 LPM @36Mtrs Ø Input Power:- 22Kw(30HP) Ø Packaging:- gland packed Ø AVM Pads,Base Frame,Coupling,Foundation Nuts and bolts

Fire Jockey Pump Ø Capacity:- 147 LPM @ 36Mtrs Ø Input Power:- 3.7Kw(5HP) Ø Packaging:- gland packed Ø AVM Pads,Base Frame,Coupling,Foundation Nuts and bolts

Supply, Installation, Testing and Commissioning of Pressure Switches for Main Pump, Jockey pump including necessary wiring upto control panel and Ball valve.

Supply, Installation, Testing and Commissioning of 100mm dia bourden type, Stainless steel dial type Pressure Guage (0 - 16 Kg ) range, 3 / 8 " BSP bottom entry on Pump Delivery Line complete with Ball valve

Panel- for Fire Pumps Providing and Fixing in position, testing and commissioning of the following front operated cubicle type, front access 2mm thick steel enclosed free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hz system and suitable for a fault level of 25 MVA symmetrical at 415 volts with a suitable power capacitor to improve power factor.

All switchboards shall have provision for entry of cables from the top or bottom as required.

All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The busbars insulation shall be with heat shrinkable sleeves. SMC/DMC shrouds and busbar supports shall be used. Padlocking facility shall be provided on all outgoing feeders doors and switch handles shall be locakble in OFF position. The motor control panel shall be prewired with colour coded wires with identification labels complete in all respects as required. (Make- Approved make only ) Providing and fixing heavy duty copper armored cables 1.1 KVA grade including necessary support clamps at ceiling level and connection legs complete in all respects.

Power cable 3 core 16 Sq.mm ( Jockey Pump)

Power cable 3 core 50 Sq.mm ( Main Pump )

Supply, Installation, Testing and Commissioning of 'C' class Medium duty MS pipe conforming to IS 3589 / 1239 for hydrant and sprinkler applications including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall/ceiling with suitable clamps and including painting of two coats of Red Oxide , painting with two or more coats of synthetic enamel paint of Post office red shade complete as required. The installation includes all civil openings ,breakages and making good the same.

25mm dia(1")

32mm dia(1.25")

40mm Dia(1 1/2")

50mm dia(2")

65mm dia(2/1/2")

80 mm dia(3")

100 mm dia(4")

125mm dia(5")

150 mm dia(6")

Supply, Installation, Testing and Commissioning Flanged End Double Rubber Seat as per 15 : 4038 Cast Iron Body Swing Type Foot Valve.

a. 150mm dia

Supply, Installation, Testing and Commissioning of sluice gate valve

b. 125mm dia

Providing and fixing C.I double flanged horizontal/vertical type non-return valve including nuts, bolts, 3mm thick rubber insertions complete to I.S:5312, Part-I, swing type, class PN 1.6.

a. 125mm dia

b. 100mm dia

Supply, Installation, Testing and Commissioning of Strainer confirming IS:5312 150mm dia

a. 125mm dia

b. 100mm dia

Supply, Installation, Testing and Commissioning of Rubber expansion bellows 150mm

a. 150mm dia

b. 100mm dia

Providing and fixing butterfly valves, wafer end type class PN 1.6 as per I.S:13095 - 1991 or BS:5155, including lever, key and necessary nuts, bolts, gaskets etc. complete

a.100mm dia

b. 80mm dia

c.65mm dia

Supply, Installation, Testing and Commissioning of metal ball valve 25mm dia

Supply, Installation, Testing and Commissioning of MS Heavy 1inch(25mm) Socket threaded

Supply, Installation, Testing and Commissioning of Hanging Clamp for sprinkler

Supply, Installation, Testing and Commissioning of Pendent type sprinkler(UL listed)

Supply, Installation, Testing and Commissioning of Air Release Valve

Supply, Installation, Testing and Commissioning of Pressure Relief Valve

Supply, Installation, Testing and Commissioning of SS single headed Internal / external hydrant valve/landing valve , with 1 No. 63 mm dia instantaneous Gun metal coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A).

Supply, Installation, Testing and Commissioning of Fire hydrant double door box

Supply, Installation, Testing and Commissioning SS 63mm dia short size branch pipe with 20mm dia nozzle confirming to IS:903

Supply, Installation, Testing and Commissioning RRL Hose type A confirming to IS-636 63mm dia 1x15mtrs long complete with male and female couplings(IS:903) bound and revited to hose pipe.

Supply, Installation, Testing and Commissioning of Swinging type First Aid Hose reel drum with 30 mtr length and 20 mm nominal dia rubber water hose confirming to IS8090-1976 complete.

Supply, Installation, Testing and Commissioning Fire Brigade inlet Connection 2 Way 100mm

Supplying of fitting and other necessary accessories for erection of Main line Riser,(MS Socket/Hose clamp/Welding rode/ washer/Reducer/MS -T/MS Elbow/MS Flange/ MS Cutter wheel blade 4"/6" & other necessary fittings Nut Bolt, Anchor Fastner etc.

Supply and Installation of 50x50x2mm MS Angle- ISI standared

Loading,unloading,transportation charge

4KG ABC(POWDER) FIRE EXTINGUISHER

2KG ABC(POWDER) FIRE EXTINGUISHER

Hanging clamp for extinguishers

FIRE WATER TANK

Excavation in soil in hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 50 meters.

Providing & Laying in position cement concrete of 1:3:6 mix. (1 cement, 3 coarse sand,6 graded stone aggregate of 20mm & down size) including compacting curing etc. all complete.

Providing & Laying in position 1:1.5:3 mix (1cement, 2 coarse sand 4 graded stone aggregate 20mm and down nominal gauge) reinforced cement concrete of nominal mix excluding the cost of form work, finishing & reinforcements of cement) as per the direction of Engineer in Charge.

Providing, fixing and removing form work for casting R.C.C items as indicated below: (with locally available)

Supplying, bending and placing in position of Tor steel reinforcement in all R.C.C works i/c cost of binding wires all complete.

Providing & laying Plum concrete in 1 : 2 :4 c.c. (1 cement, 4 clean coarse sand, 8 clean hard graded stone chips of 40 mm down nominal gauge) with 50% clean hard stone of sizes not execeeding 15 cm including shuttering, compacting and curing complete.

Providing and Laying 40 mm thick with Recorn 3S polyester fiber of specified length (anti seepage / cracking) in 1:2:4 c.c. (1cement, 2 coarse sand, 4 stone aggregate of size 12.5mm and down )flooring with floating coat of neat cement to give a smooth surface in not exceeding 02 sqm. including cost of glass strips and curing etc with complete in all building floors wherever specified.

Providing and Laying 20mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing etc all complete.

Haulage for stock material via Surfaced Road

Loading and Unloading of Cement or Steel

Haulage for Fine Aggregate via surfaced road

Haulage for Coarse aggregate, via Surfaced Road

Haulage for throwing away of excavated earth via Surfaced Road for the distance of 10 km excluding loading and unloading all complete.

Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/ Kanker/ Moorum/ excavated earth.

Provision for furniture ,fixture & laboratory equipment .

Estimate for shifting & re-erection of existing structure and electrical equipment I/c distribution of existing transformer & other allied works.

Provision for Installation of passenger lift.

ANKIT AGARWAL (BID ID -2997)

NLM Infra Projects (BID ID -2996)