REPAIR/MAINTENANCE/ REPLACEMENT OF INTERNAL WIRING/ MCBS/ DBS/ FITTING AND FIXTURES AT DOMESTIC AREA AT 505 SU, AF STN MAMAURA

Amount

Material and labour for point wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, ISI marked, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, ISI marked, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick with 3 mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light / fan point controlled by one, one way switch 06 Amp including taking down carefully existing copper/aluminium point wiring such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc.

All as per item No 1 above but on the same board.

All as per item No 1 above but 5 Amp socket outlet on independent board .

All as per item No 1 above but for one bell/Buzzer point controlled by one bell push button on the same board with other switches or independent with 1.50 sqmm size cable all as specified.

All as per item No 1 above but for one light point controlled by two, 2 way switches all as specified.

All as per item No 1 above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 2.5 sq mm connected to common earth dolly all as specified.

Material and labour for point wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, ISI marked, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, ISI marked, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick for modular switches & socket of size as per site requirement including suitable modular plates and cover and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light / fan point controlled by one, one way switch 06 Amp including taking down carefully existing copper/aluminium point wiring such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc.

All as per item No 7 above but on the same board.

All as per item No 7 above but 5 Amp socket outlet on independent board .

All as per item No 7 above but for one bell/Buzzer point controlled by one bell push button on the same board with other switches or independent with 1.50 sqmm size cable all as specified.

All as per item No 7 above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 2.5 sq mm connected to common earth dolly all as specified.

S&F switch modular type 5/6 Amps, 230 V AC, single pole, one way complete all as specified and directed. Make - Anchor / Cona /Indo Asian.

S&Fin-replacement switch modular type 5/6 Amps, 230 V AC, single pole, one way complete all as specified and directed. Make - Anchor / Cona /Indo Asian.

S&F switch modular type 16/20 Amps, 230 V AC, single pole, one way complete all as specified and directed. Make - Anchor / Cona /Indo Asian.

S&F in replacement switch modular type 16/20 Amps, 230 V AC, single pole, one way complete all as specified and directed. Make - Anchor / Cona /Indo Asian.

S&F socket out let multipurpose modular for 2 pin and 3 pin, 5 Amp flush type with shutter complete all as specified and directed. Make - Anchor / Cona /Indo Asian.

S&F in replacement socket out let multipurpose modular for 2 pin and 3 pin, 5 Amp flush type with shutter complete all as specified and directed. Make - Anchor / Cona /Indo Asian.

S&F Modular bell push type 5/6 Amps, 230 V AC, single pole, one way complete all as specified & directed. Make - Anchor / Cona /Indo Asian.

S&F in-replacement Modular bell push type 5/6 Amps, 230 V AC, single pole, one way complete all as specified & directed. Make - Anchor / Cona /Indo Asian.

S&F socket outlet, multipurpose, modular 6 pin, 6 /15Amp with shutter complete all as specified and directed. Make - Anchor / Cona /Indo Asian.

S&F in replacement socket outlet, multipurpose, modular 6 pin, 6 /15Amp with shutter complete all as specified and directed. Make - Anchor / Cona /Indo Asian.

Supplying and fixing in replacement modular Fan step regulator, 120W - 2 module. Make - Anchor / Cona / Havells / SSK.

Supplying and fixing switch piano, flush button single pole, one way 6 amp. Make - Anchor / Cona / Havells / SSK.

Supplying and fixing in replacement switch piano, flush button single pole, one way 6 amp. Make - Anchor / Cona / Havells / SSK.

Supplying and fixing switch piano flush button single pole one way 16 amp complete. Make - Anchor / Cona / Havells / SSK.

Supplying and fixing in replacement switch piano flush button single pole one way 16 amp complete. Make - Anchor / Cona / Havells / SSK.

Supplying and fixing socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete. Make - Anchor/ Cona / Havells /SSK.

Supplying and fixing in replacement socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete. Make - Anchor/ Cona / Havells /SSK.

Supplying and fixing bell push, flush type, 6 amp 240 volts complete. Make - Anchor / Cona / Havells / SSK.

Supplying and fixing in replacement bell push, flush type, 6 amp 240 volts complete. Make - Anchor / Cona / Havells / SSK.

Supplying and fixing switch flush type, 6 amp, single pole, two way complete. Make - Anchor / Cona / Havells / SSK.

Supplying and fixing in replacement switch flush type, 6 amp, single pole, two way complete. Make - Anchor / Cona / Havells / SSK.

Supplying and fixing socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete. Make - Anchor/Cona Havells /SSK.

Supplying and fixing in replacement socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete. Make - Anchor/Cona Havells /SSK.

Supplying and fixing ceiling rose 63 x 25 mm three terminals complete. Make - Anchor / Cona / Havells / SSK.

Supplying and fixing in replacement ceiling rose 63 x 25 mm three terminals complete. Make - Anchor / Cona / Havells / SSK.

Supplying and fixing in replacement door bell, ding dong/ multi music, AC, 240 volts, single pole complete. Make - Anchor / Cona / Havells / SSK.

S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting including 09 Watt LED lamp B22 CDL complete all as specified & directed.

Supply and fix in replacement electronic ceiling fan regulator having 5 rotary step, two module, humfree, AC, 240 volt, 100 Watt and duly ISI marked complete all as specified & directed. Make: Havells/Bajaj/Anchor

Material and labour for sub main wiring with 4 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, ISI marked, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 4 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm or more dia, medium grade, ISI marked complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

Supply and fix in replacement of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 04 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.Make :- Legrand/Hager/Schneider.

All as Item No 41 above but 8 way

Supplying and fixing in replacement tripple pole and neutral, powder coated, CRCA steel sheet, Vertical type MCB distribution board manufactured as per IS 8623 suitable for MCCB incomer upto 125 amp, 4 way, 415 volts, degree of protection IP 43 - IK- 09 with metal door, recess mounted, having 200 amp insulated tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces etc as required. Make : Legrand/L&T/Hager/HPL/ Havells.

All as Item No 43 above but 08 way.

Supplying and fixing in replacemrnt 20 amp, single pole and neutral, industrial type socket outlet, with 2 pole and earth, metal enclosed plug top in powder coated CRCA steel sheet enclosure recess mounted with chained metal cover for the socket outlet with and including one number single pole 'C' series MCB 20/32 amp as required. Make : Legrand/L&T/ Hager/ HPL/ Havells.

Supplying and fixing as per load requirement MCBs of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

Single pole 6 to 32 amp, "C" curve. Make : Legrand/L&T/ Hager/ HPL/Havells

SPN 05 to 32 amp. "C" curve. Make : Legrand/L&T/ Hager/ HPL/Havells.

SPN 40 to 63 amp. "C" curve. Make : Legrand/L&T/ Hager/ HPL/Havells.

Triple pole, 25 to 63 amp. Make : Legrand/L&T/ Hager/ HPL/Havells.

TPN 40 to 100 amp. Make : Legrand/L&T/ Hager/ HPL/Havells.

Note for MCBs & MCB DBs:- MCBs & MCB DBs shall be of the same make. MCB DBs shall be fixed on wall in flush pattern by cutting the wall and making good disturbed surfaces.

Supplying and fixing MCCB four pole, 125 amps, 16 KA thermally adjustable between 70 to 100% including 4 spreader link set of same make as that of MCCB for connection, required lugs etc complete. Make : Legrand/L&T/ Hager/ HPL/Havells.

Supply only KWH meter, Single Phase, Electronic energy meter of rating 5-30 Amp, class-1.0, 240V, 50 Hz, counter type display with Transparent Hinge Type Box as per sample all as specified and directed by Engr-in-Charge. Make: Philips/Havells/Crompton/ Vipro.

Supply and fix in replacement of surface mounted LED tube light fitting four feet long, 18-22 Watt, 2000 lumen, Polycarbonate diffuser having 3000K/6500 as required with IP 20 protection comprises of aluminium extruded channel, frosted diffuser, integrated electronic driver, etc and all accessories pre-wired including connecting up complete all as directed. Make: Philips/Havells/Crompton/ Vipro.

Supply and fix in replacement of LED mirror light fitting, 10 Watt, 2 feet long with IP 20 protection comprises of aluminium extruded channel, frosted diffuser, integrated electronic driver, etc and all accessories pre-wired including connecting up complete all as directed. Make: Philips/Havells/Crompton/ Vipro.

Supply and fix in replacement of recesses mounted 2'x2' LED ceiling light fitting 35/36 Watt, 3650 lumen, 6500K, with IP 20 protection comprises of CRCA housing, high efficiency diffuser cover, electronic driver, etc and all accessories pre-wired including connecting up complete ass as directed. Make: Philips/Havells/Crompton/ Vipro.

Material and labour for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed.

Supply and lay, jointing & testing of cable XLPE armoured LT 1100 volt grade heavy duty with Stranded aluminium conductor passing through ducts/pipes and run on poles/walls including fixing with proper size of alluminium lugs/saddles and including taking down old cable of the following sizes.

6 Sq mm 2 Core.

10 Sq mm 2 Core.

M & L for taking down the ceiling fan /Exhaust fan /cabin / wall fan/ table fan / pedestal fan of any size from various building/ locations and opening the same for servicing by cleaning each part with air blower/vacuum cleaner and cloths, filling the cavities with filler, painting with synthetic enamel paint by spraying including replacement of worn out nuts, bolts, screws, washers, split pin rubber pad, oiling greasing, writing SM / MES No. of fan and refixing testing complete all as specified and as directed by Engr-in-charge.

Rewinding of Ceiling/ Exhaust/ Cabin fans and pedestal fans comprising of followings:

Rewinding of stator with supper enameled copper wire (gauge of wire shall be same as provided by the manufacturer) including varnishing the new winding wire with quick dry varnish properly.

Replacement of defective worn out bush where required, (ball bearing, capacitor will be measured and paid separately).

Oiling/greasing and reassembling the fans with new split pin, check nut, locking bolt, washer, holder clip and connector including providing new ISI mark three core flexible copper wire of size 1.5sqmm of 1 Mtr length.

Testing of repaired fan shall be carried out in the E/M yard to the entire satisfaction of the Engr-in-Charge.

ceiling fan of 1200 mm Sweep

ceiling fan of 1400 mm Sweep

exhaust fan 300 mm (12") Sweep

exhaust fan 450 mm (18") Sweep

cabin/wall fan 450 mm Sweep

table/pedastal fan from 450mm upto 600mm Sweep

table/pedastal fan upto 400mm Sweep

M & L for replacement of the following items in repairs :

Gun metal bush for ceiling fan of any make & sweep.

Ball bearing for ceiling/wall/pedestal/cabin /table Exahust fan of any make and sweep. Make : NBC/SKF/TATA.

Rotar shaft for fan.

Rubber seal for fan.

Condenser 2.5 MFD for fan as required

Condenser 4.0 MFD for fans as required

Condenser 6.0 MFD for fans as required

Canopy for ceiling fan of any make and sweep

Flexible wire 23/0.0076 twin core copper conductor

-do- but of size 40/0.0076 three core

MS bolt with nut 10mm dia 75mm long

MS clamps for down rod complete with nut, bolt and rubber pad, split pin and washer for ceiling fan of any size & make.

Down rod for ceiling fan made of GI pipe med gde 15mm dia of length upto 1.0M as requred including threading, cutting, drilling, nuts bolts, clamps and washers, rubber pads, cotter pin etc.

Supply and fixing blade set (set of three) for any type/make of ceiling fan 1200 mm Sweep all as Specified and directed. (OEM spares only)

Disconnecting and taking down carefully unserviceable voltage stabilizer upto 5 KVA capacity and replacement of the defective/unserviceable relay and testing and refixing on site after repair complete all as specified and directed.

Disconnecting and taking down carefully unserviceable voltage stabilizer upto 5 KVA capacity and replacement of the defective/unserviceable transformer and testing and refixing on site after repair complete all as specified and directed.

Supply only KWH meter, three Phase, 4 wire, 415 Volt Electronic energy meter of rating 5-30/10-60 Amp, class-1.0, 50 Hz, counter type display as per sample all as specified and directed by Engr-in-Charge.

Supply and fixing voltage stabilizer of 5 KVA capacity, 230 V complete all as specified and directed.

Taking down Ceiling fan/Exhaust fan any size any make, sealing cable ends, dismantling blades in case of ceiling fan and removing fan and blades to E/M store and refixing after necessary repairs and connecting up all as directed.

Repair and overhauling of Ceiling fan/ Exhaust fan/ Cabin fan/ Wall mounting fan/ Table fan/ Pedastal fan of any size by oiling/ greasing and reassembling the fan with new split pin, check nut, locking nut, washer, holder clip & connector. Testing and refixing of same fan shall be made to the entire satisfaction of Engineer-in-charge.

Note: Repair work will be carried out at MES workshop/at site/ Users Residence as directed. Material required (Ball bearing and Condenser) for replacement of items will be measured and paid separately.

Taking down the Geyser of any make and size horizontal or vertical from Site for repairs/overhauling/replacement of unserviceable parts (Repairs/replacement of parts Shall be measured and paid separately)including replacement of old nuts and bolts with washers heavy duty including disconnection of electric supply, water supply lines and refixing the the Geyser in the serviceable condition after assembling, testing and reconnecting the electric/ water supply line all as specified and directed by Engr-In-Charge.Note:- Replacement of unserviceable parts of old Geyser shall be measured and paid separately under respective item here in after except bolt, nuts and washers.

S & Fixing in replacement of heating element of Geyser (ISI marked) of capacity 2.0 KW for any make and type all as specified and directed by Engr-In-Charge. (OEM spares only)

S&F in replacement Thermostat (ISI Marked) suitable for any type, make and capacity of geyser complete all as specified and directed by Engr-in-charge.(OEM spares only)

S & F in replacement of unserviceable indicating lamps red and green colour for Geysers any make complete all as specified and directed by Engineer in charge (OEM spares only).

Supply and replacement of unserviceable door assembly ISI marked comprising of inlet and outlet thermostate, housing with gasket complete with bolts, nuts, washers, screws of packing suitable for any type and make of geyser complete all as specified and directed by Engineer in Charge.

M & L for repairng of leakage of inner copper/steel tank of any type /capacity and make of Geyser by brazing complete including necessary denting, machinery charges etc all as specified and directed by Engineer in charge

S&F metallic top suitable for 20 Amp capacity plug & socket complete all as specified.

S & F in repair Stainless steel inner tank 25 Ltrs capacity, ISI mark of as per existing gauge for Geysers of any make as approved and directed.

S&F in replacement of brass Safety Valve heavy duty ISI marked for any type and make of Geyser suitable for 15 mm bore of pipe complete all as specified and directed.

S & F PVC pipe connection hot series with both side nut with rubber washer suitable for any capacity Geyser of make Jaguar/Havells for following :

Supply and fixing in repair LED PL- L 18W 4 Pin 5000-6500K color teperature complete all as specified and directed. Make: Philips/Havells/Crompton/ Vipro

Supply and fix in replacement of integrated LED bulk head fitting 9/10 Watt LED lamp, 60 lumen, 6500K with IP 66 and IK 09 impact resistance protection comprises of high pressure die cast aluminium housing, polycarbonate cover etc complete all as directed. Make: Philips/Havells/Crompton/ Vipro

Supply and fix in replacement of LED panel square/round shape light as required of 12 Watt LED, Slim, compact, auminum die cast edge lit panel, recess mounted square fixture with opal diffuser and separate electronic driver, 6500K complete all as directed. Make: Philips/Havells/Crompton Vipro

Supply and fixing in replacement round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. Make: Philips/Havells/Crompton /Vipro

All as per item no 112 above but of 12 watt capacity.

Supply only 10 SQMM 2 Core Aluminium unarmoured, flame resistant PVC flat cable all as specified and directed.

Material and labour for sub main wiring with 10 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, ISI marked, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 10 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade, ISI marked complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

All as Item NO 115 above with 06 Sqmm nominal cross section area

Supply and fix in replacement of MCCB, 63 Amp, 04 Pole, AC, 415 volt of 16 ka breaking capacity and making connections by using suitable copper lugs complete all as specified & directed. Make :- Legrand/Hager/Schneider.

Supply and fix in replacement of decorative wall mounting type LED light fitting, 1 x 9 Watt, 230 Volt made up of Polycarbonate including shade, lamp holder, 9 Watts LED lamp B22 CDL etc and all accessories pre-wired including connecting up complete all as specified and directed. Make Havells/Philips/Bajaj.

Supply and fix in replacement of Decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base, 230 Volt including 09 Watts LED lamp warm day light etc and all accessories pre-wired including connecting up complete all as specified and directed. Make Havells/Philips/CG.

M&L in repair of Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthling etc. as required 4mm dia galvanised iron or steel wire complete all as specified and directed.

S&F Terminal junction box with including nut bolts with iron clamp out door dust and vermin proof fabricate with 1.6 mm thick MS sheet encloser 200X 250X150 mm including neutral link and 4 nos 230 volts 63 amps bus bar for house connection with 2X10 SQ mm copper conductor multi standard and connecting insulator including two coats of synthetic enamel paint over a coat of metal primer complete all as spcified.

Supply and fixing decorative LED lighting fixture with extruded aluminium, heat sink, environmental friendly, energy efficient ready to use suitable for 4' LED tube complete all as specified and directed. Make Havells/Philips/Bajaj.

Supply and fix in replacement of single side connection LED T8 tube rod 20 Watt with PC body and diffuser, >2000 lumen, 6500K of four feet long into existing T8 conventional fluorescent tube light fitting after changing the necessary electric connections as required at site complete all as directed.Make Havells/Philips/Bajaj.

Supply and fix in replacement of Blade Set with frame & four legs of fan with coupling for 300 mm (12") sweep exhaust fan all as Specified and directed.(OEM spares only)

Supply and fix in replacement of Blade Set with frame & four legs of fan with coupling for 450 mm (18") sweep exhaust fan all as Specified and directed.(OEM spares only)

Supply and fix in replacement of louvers for 300 mm sweep exhaust fan all as specified and directed.

Supply and fix in replacement of louvers for 450 mm sweep exhaust fan all as specified and directed.

Supply and fix in replacement of three core ISI mark copper lead wire of size 1.5 sqmm as directed.

Supply and fix in replacement ofhook for hanging ceiling fans and similar small articles confirming to Fe-290 Gde-E-165 complete all as specifed and directed.

Supply and fix in replacement of GI Tubing 40 mm bore , Light grade with all fittings fixed to wall, floor, ceiling or laid in floors as directed. Make: Jindal/Prakash Surya.

Supply and fixing anchor fasteners having 12mm dia hook bolt for hanging ceiling fans or similar items complete all as specifed and directed.

Supply and fix in replacement of fasteners having 10mm dia bolt for fixing exhaust fans or similar items complete all as specifed and directed.

Providing services by deploying suitable manpower for attending day to day complaint for petty repair of E/M nature equipments/items and reporting on daily basis to concerned JE for submission of completion of work all as specified and directed . (Note: Store for relevent items will be provided by deptt)

VEE KAY ENTERPRISES

NAVSURAJ CONSTRUCTION AND INFRADEVELOPERS