Shifting work of poles and lines from Km. 215 to 285 of NH-76 under Deposit Scheme in EUDD, Banda/EDD, Atarra

The work of dismentling/repairing & re-construction of 11 KV HT/LT Lines & Sub-Stations of various places on 8.5/11 Mtr. long PCC/ST Poles with ACSR Weasel/Dog/ABC Conductor for shifting of lines/poles from midle of road to road side due to widthening & saturation of National Highway-76 Marg from 215 Km. to 285 Km. under Full Deposit Scheme Year 2022-23 at EDSD, Chilla Road/Atarra under EUDD, Banda/EDD, Atarra, including carriage of all required material/poles from E.S.C., BANDA to work site, alongwith its loading, unloading & dragging at the respective ends and also carriage of old/damaged scraped material from site to site/store centre, if any. During the erection/shifting of poles/lines has to be done including cartage. Various type some works, which are not mentioned in scope of work, but actual required has to be arranged/completed by contractor at his own cost. No extra payment will be made to such petty requirement. details of the work as given below ;-

Cartage of 11 Mtr. long ST poles

Cartage of 8.5 Mtr. long PCC poles

Cartage of line material

Erection of single support structure on 11 Mtr. long ST Poles, including complete HT/LT fittings as per direction of Engineer incharge/RESSPO manual.

Erection of single support structure on 8.5 Mtr. long PCC Poles, including complete HT/LT fittings as per direction of Engineer incharge/RESSPO manual.

Erection of double pole structure on 8.5/11 Mtr. long PCC/ST poles, including the work of complete HT/LT fittings as per direction of Engineer incharge/RESSPO manual.

Erection and grouting of stay set including the work of nozelling etc. as per RESSPO manual and also including the cost of all grouting material.

Fixing of earthing rod as per RESSPO manual.

Fixing of T-Off Channel with fitting of all accessories as per RESSPO manual.

Laying, sagging, stringing, binding and jumpering etc. of ACSR Dog Conductor with fitting of all accessories on the erected pole as per direction of supervising engineer/RESSPO manual.

Laying, stringing, binding and termination etc. of ABC Conductor (3x120+1x95+1x16 Sq.mm.) with fitting of all accessories on the erected pole as per direction of supervising engineer/RESSPO manual.

Laying, sagging, stringing, binding and jumpering etc. of ACSR Weasel Conductor with fitting of all accessories on the erected pole as per direction of supervising engineer/RESSPO manual.

Dismentling & removal of existing/erected old/existing Rail/ST Poles with its accessories from various area alongwith cartage of the same from work site to store as per direction of supervising engineer.

Dismentling & removal of existing old ACSR Weasel/Dog/ABC Conductor of 11 KV/LT Lines from various area and shifting/re-erection from middle of road to road side as per direction of supervising engineer, including the work of its proper stacking & cartage.

Replacement of damaged 11 KV Disc Insulator with fitting.

Replacement of damaged 11 KV Pin Insulator with Pin

Replacement of damaged 11 KV "V" Type Steel Cross Arm

Replacement of jumpers of 11 KV Lines at various places as per direction of supervising engineer.

Replacement of jumpers of LT Lines at various places as per direction of supervising engineer.

Safely shifting of medium power as 100/250/400/630 KVA transformers from the old ereted/existing single/double pole/plinth to new work/road side in proper alignment complete work, including the work of its cartage, loading & unloading at the respective ends due to widthening & saturation of National Highway-76 Marg.

Construction of new 11/0.4 kV, 100/250/400/630 KVA Transformer plinth of size 4x4x5 ft. above ground level and one ft. below the ground level of 9”. After excavation of 4” earth, brick ballast shall be provided and rammering will be done properly. After that a retaining wall of 9” width by first class brick in ratio 1:5 of cement and sand shall be made. The earth shall be filled up to one ft. below the top of the plinth. After this brick ballast shall be provided up to 6” from the earth level and proper rammering shall be done. One No. Jail of 12 mm MS tore shall be fixed in the hollow of plinth and one ft. thick RCC in ratio of cement, sand and stone ballast shall be laid on the top of the plinth. The 12 mm thick plastering shall be done all around the plinth in 1:4 ratio of cement and sand. The contractor shall be responsible to complete the work as per direction of Supervising Engineer.

Concreting/Grouting of newly erected single/double pole structure on 11 Mtr. long ST poles as per direction of supervising engineer/RESSPO manual. The support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 (0.285 Cu. Mtr. each), including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement.

Fixing of Distribution Box on 11 KV single/double pole structure.

Dismentling of T/F Fencing from old site of work & re-use/installation in newly erected transformer plinth as per direction of supervising engineer.

MAA ELECTRICAL ENERGY