NEW TUBEWELL AT DEGREE COLLEGE AJNALA BLOCK AJNALA DISTT AMRITSAR. UNDER HE-24 IMPROVEMENT IN INFRASTRUCTURE 4202-01-203-26-53-99

Amount

Boring with casing pipe for tubewell in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the tube well is lowered & tested, equipment as requried such as hand boring machine and its accessory, transportation to site and vice versa etc. complete in all respect. Boring with 250mm id Housing Pipe Upto 130 m depth BGL.

Supplying, lowering of MS Pipe as per IS: 4270-2001 including MS sockets having dimensions as per IS code duly welded with MS electrode to have extra strength to lower the pipe into tubewell bore. (c)200mm nominal diameter (weight33.6 kg per meter) 6.40mm thickness

Supplying, fixing & lowering of Stainless Steel Cage type wire wound screen as per IS: 8110-2000 or latest ISI Marked, Duly welded with suitable grade S.S welding electrode to lower the strainer into tube well bore. 200mm Steel Strainer (slot size 0.15 mm) 6.30 mm thickness

Supplying, fixing and lowering of stainless steel socket as per IS 8110-2000 or latest, ISI Marked duly welded with suitable grade SS Welding electrode to lower the strainer into tubewell bore complete in all respect. (b) 200mm internal diameter

Supplying, Lowering & fixing of M.S. special socket to connect S.S. Strainer to M.S. Pipe duly welded with suitable grade welding electrode complete in all respect. (c) 200 mm internal diameter

Supplying & fixing of M.S Clamp of size 150mm X 12mm made out of MS Flat 1.52m long, suitable to fit Housing pipe including the cost Nut & Bolts of Suitable size complete in all respect.

Supplying at site Wooden Box of suitable size with Lid & locking arrangment for preserving strata sample collected from the bore.

Supplying & Fixing of bail plug of MS Pipe complete with inverted U-hook attached to the bottom plug complete in all respect 200mm internal diameter (weight 33.6kg per metre) 6.4 mm thickness

Supplying & Fixing of well cap having thread to fix on housing pipe complete in all respect. 200mm internal diameter

Development and Stabilizing of the tubewell with air compressor of required capacity as directed by the engineer-in- charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge. Capacity of Air compressor 300 cfm at 250 PSI

Development and Stabilizing of the tubewell with submersible pump of required capacity as directed by the engineer-in- charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge.

Collection of water sample from different strata and testing of sample from approved laboratory (Phisical & chemical Analysis)

Testing of water sample for Heavy metal from approved laboratory (Toxic material such as Arsenic, lead, mercury, pesticide etc.)

Provision for Sanitary Clay Seal (as per BIS Code IS 2800: 2019) including Sterlization of Tubewell

Providing & Installing Testing & Commissioning of One No. Electrically driven Submersible Pumping set of reputed Make capable of delivering 350LPM (10.00 BHP ) against a head of 59 mtr along with electric panel board consisting of electric appliances such as automatic Star Delta Push Button or oil immersed Starter, Main Switch, VM, Ampere Meter, ELCB, Shunt Capacitor, Single Phase preventer, Indicating Lamps, Kit-Kat etc. including G.I. Column Pipe of suitable size 65 mm =33.5 mtr (in 3 mtr lengths each with flanges , screwed and welded on both sides) rubber gaskets, nuts and bolts submersible cable (reputed make) complete in all respects as per standard Specifications.

Providing & Installing (10.00 BHP ) Motor with Pump

Providing & Fixing Panel Board

Provision for Submersible Cable 4mm2 thick from existing pump chamber to proposed New Tubewell.(including)

Providing & Fixing MDPE pipe for Submersible Cable 4.00mm2 thick from pump chamber to delivery Main complete in all respects.

Providing & Fixing Column Pipe (G.I) Pipe 65mm i/d

Providing & Installing Testing & Commissioning of One No. Electrically driven diaphragm opreated metering system chemical dosing chlorinator suitable for for delivering 0.5 to 6 liters of Bleaching Powder solution/ Sodium Hypo solution per hour under maximum delivery pressure upto 7 Kg/cm2 and suction left not less than 1.5 mtr., as per DWSS standard specifations.

Providing & Fixing MDPE pipe for chlorinator from pump chamber to delivery Main complete in all respects.

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in – charge) b) 100mm i/d

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department 1 Nos. With each of Size 0.90m x 0.90m Complete in all respects

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (Manually) (10 kgf/cm2) (excavation & including specials) PVC pipe 110 mm o/d

Carriage of Bajri (Course Agrregate)

Extra Carriage of Sand (Fine Aggregate)

Credit for old Machinery only (-)

CONDITIONS :-

Item for which no rate or price has been entered in will not be paid for the Employer when execut6ed and shall be deemed covered by the other rates and prices in the Bill of Quantities.

Unit rates and prices shall be quated by the bidder in indian ruppees.

Where there is a discrepancy between the rate in figures and words, the rates in words will govern.

Where there is a discrepancy between the rate and the line total resulting from muluplying the unit rate by quantity the unit rate quoted shall govern.

Any item of work not included in the above contract schedule of rates and got done at the site of work; the same will be paid according to CSR-2010 subject to the premium or discount tendered by the contractor. In the case of non-schedule items, the decision of the Engineer-in-charge will be final and binding upon the contractor. In case any item which is a part of lump-sum rate is be deducted @CSR rates + Ceiling premium prevailing on the date of tender

The work will be carried out in accordance with PWD Book of specifications - 1963 edition with upto date amendments.

Approximate quantities are given in the contract schedule of rates and these can vary at the time of execution of the work. The payment will be made according to the actual work done by the contractor.

All amendments issued on the common schedule of rates 2010. up to the date of opening of tenders will be applicable on the contract schedule of rates.

Contractor should clearly quote his rates in figures & words. Conditional tender will be rejected.

All items and rates provided in the DNIT are subject to the footnotes give in CSR-2010

The Engineer-in-charge will have full powers to change the layout of the work covered in this contract if considered necessary.

No claim will be entertained form the contractor in case, any mistake in description rates or unit occurs in any item taken in this schedule while preparing this DNIT or on account of typing or comparison or over writing. The same will be rectified at any time as per common schedule of rates 2010 along with upto date amendments.

The arrangements of bricks at site of work would be done by the contractor at his own level from his own source.

For any other non-schedule items, the contractor will submit through Engineer-in-charge, the analysis of rates in triplicate based on purchased vouchers. A margin of 10% shall be allowed for material components and 21.5% on labour components and contractor shall produce photo stat copies of the purchase vouchers in support of his claim. The decision of the Engineer-in-charge/Competent authority in the matter shall be final and binding on the contractor.

All the extra items will be got approved from the competent authority and no premium will be allowed on non schedule item

Pavement for the carriage of material shall be paid as per the rates quoted by the tenderer.

Time period allowed for completion of work in 2 months.

If contractor allowed for completion of work within 7 days from the date of allotment, DWSS reserve the right to impose penalty or withdraw the work and propose action for debarring in future tendering or both; decision of Chief Engineer (North) shall be binding.