8819/2021-22/E8

Amount

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in hard / soft soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils.

Removing Excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point.

M/L Plain Cement Concrete Type D-2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete as specified & directed

M&L For Broken brick bat hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface.as specified & directed

M&L 100 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded granite stone aggregate) in sub base of flooring/ hard standing as specified & directed

M&L 75 mm thick Cement concrete type C1, 1:3:6 (using 20 mm graded granite stone aggregate) in Plinth protection .

M&L Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 as specified & directed

M&L Reinforced cement concretetc M-25 using 20mm graded stone aggregate as in plinth beams, lintel beams as specified & directed

M&L Reinforced cement concretetc M-25 using 20mm graded stone aggregate as in foundation, including rafts, footings, foundation beams etc as specified & directed

M&L Reinforced cement concretetc M-25 using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts as specified & directed

Use and waste of formwork for foundation beams floor beam roof beam etc as in lintel over 1.5m clear span. for rough finished surfaces as specified & directed

Use and waste of formwork to sides of pillars, columns,posts for fair finished surfaces as specified & directed

M&L Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, beams,hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips as specified & directed

M&L Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups,spacers and binders as specified & directed

M&L for non skid cereamic coloured tiles 7 to 8mm thick (square/ rectangle) area of each tiles exceeding 0.11 sqm but n. exc.0.18 sqm, in floor etc set and joined in neat cement slurry and pointed in white or .coloured cement to match and laying over 15 mm thick in cement mortar 1:6 screed bed or bedding layer of mortar for laying floor finishes as directed as specified & directed

M&L glazed, ceramic, coloured tiles of size450x350x7mm thick, on vertical surfaces such as skirting, dados etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles as specified and directed and 10 mm thick in cement mortar (1:3) as in bedding layer for laying of tiles in vertical surfaces complete all as specified & direct as specified & directed

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 without using extra cement complete all as specified.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished fair and even without using extra cement as specified & directed

M&L Preparing new plastered surfaces of wall and applying two coats of cement based paint all as specified .

M&L Preparing newly plastered surfaces of walls and applying three coats of white wash as specified & directed

S&F solid PVC door frames of sizes 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section as specified & directed

S&F 100 mm long medium weight, cold rolled mild steel Butt hinges as specified & directed

S&F aluminium handle 125 mm long anodised, cast type fixed complete as specified & directed

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sq.m. each pane .and extra over sheet glass'ordianry quality if sheet glass is ground orobscured or frosted.on one side as specified & directed

S&F Steel window or ventilators with top hung shutter including hinges,steel pegstay complete all as specifid and directed

S&F in vitreous china squatting pan "orissa pattern, size 580x440mm white , with integral foot rests(excluding flushing cistern and flush pipe) including provison of lean concrete bedding connection to drain out pipe, to flush pipe and antisyphonage pipe etc, complete all as specified.(Make: Jaguar, Parry ware or somani) as specified & directed

S & F vitreous china urinal, half stall type white with grating and union for discharge pipe down take pipe etc as specified & directed

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes, single socketed in any length with rubber ring joints laid in floors or trenches, etc including necessary excavation & earth work whenever required complete as specified.

S & F 75 mm bore PVC (SWR) bends any radius as specified & directed

S & F 15 mm bore galvanized steel tubes, medium grade with all fittings complete fixed to walls and ceilings or laid in floors as specified.

S & F 15 mm bore Bip taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule as specified & directed

S & F stop valve/ angle valve 15mm bore cast copper alloy chromonium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions as specified & directed

S& F in PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve float and handle including brackets (10 ltr) including mild steel tube 32mm dia flush pipe as specified & directed

S&F in vitreous china wash basin flat back, size 600x480 mm white, excluding taps,including waste pipe, chain and plug and porcelain stopper but including brackets all as specified and as directed .

S & F in 15 mm bore pillar taps fancy type cast copper alloy chrominium plated fancy typewith capstan heads, chromium plated, screwed down high pressure with or without lettered "Hot or Cold" with long screwed shanks and fly nuts screwed for iron pipe as specified & directed

S & F PVC connection pipe 15mm size with PTMT nuts of 450 length including fixed in repairs as specified & directed

S&F PVC (SWR) 100mm dia floor trap, plain with grating including jointing with solvent cement as specified & directed

S&F MS steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing ( Beam, tee, angle, channel or flat sections) including distance pieses, cleat etc as specified & directed

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M & L, preparation of new or previously untreated steel surfaces with one coat of Red oxide and two coats of synthetic enamel of ordinary tint on surfaces of any description over 10 cm in width or grith, not otherwise described as specified & directed

S&F 20 mm dia Ball valve PTMT valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule as specified & directed

Dismantling floor, hearth or wall tiling , kota stone, granite including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises as directed

M&L Cement concrete type B-1, 1:2:4 (20mm graded aggregate) of 40mm thick as specified & directed

M&L Vitrified Ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match of light shade laying for 15 mm thick in cement mortar 1:6 screed bed or bedding layer of mortar for laying floor finishes as directed as specified & directed

M&L glazed, coloured, ceramic, tiles of size (300mm x 200 mm) x 6 to 7 mm thick, on vertical surfaces, such as dadoes, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles all as specified and directed 10 mm thick in cement mortar (1:3) as in backing layer for laying of tiles in vertical surfaces complete all as specified & directed.

S&F anodised aluminium snap grid of size 605X 605mm frame work for false ceiling all as specified, Hangers 6mm dia G.I (upto 1200mm length) adjusting level fixed to roofslabs by means of ceiling cleats made out of G.I flat 40 X 3 mm size 60mm long and expansion hold fasterners 12.5mm dia 40mm long complete all as specified

M&L providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufactures instruction as specified & directed

Taking down cement plaster of any description on brick walls/ ceiling etc including racking out joints, hacking for key, scrubbing down with water complete as specified & directed

M&L rendering 10 mm thick on internal surfaces of wall in cement mortar 1:6 finished even & smooth without using extra cement as specified and directed.

M&L preparing new plastered surfaces of internal walls and applying two coats of distemper oil emulsion over a coat of primer as specified & directed

Dismantling water tank and removing to stores exc250ltr n.exc 500ltr all as specified & directed.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part I

Dismantling timber scantlings 40sq.cm and over in section, in any position as specified & directed

M&L second class hard wood clean sawn in scantling as specified & directed

S & F 110mm bore PVC (SWR) Soil, waste and vent pipes, single socketed in any length with rubber ring joints laid in floors or trenches, etc including necessary excavation & earth work whenever required complete as specified.

S & F 110 mm bore PVC (SWR) bends any radius.

M&L providng aluminium equal angle size of 40X 40X 5 mm complete all as specified and directed.

S&F wire netting of stainless steel wire 1.4mm dia fixed with tinned tacks of stainless steel wire staples,size of mesh 12mm.,opening of size 1.00 X 2.00 m by using cleat,clipsetc.

Excavating In post holes (or similar holes) each n.exc 0.5 cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not excedding 25cm.

M&L Type B1 1:2:4 (20 mm graded aggregate) Reinforced Cement concrete ( nominal mix) in Post, columns

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required for 110 mm bore pipe as directed.

M&L Cement concrete 1:4:8 type D-2 concrete bed to drain pipes including packing under and haunching against the sides of pipes.

Supply and laying in trench/fixed on wall/floors galvanized steel water tubing medium grade ISI marked size of 20mm bore of the size incl all fittings such as bends elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and pigs, unions etc. complete all as directed . Make Jindal/Tata/Prakash Surya/Zenith. Note :- Necessary excavation and earth work shall be measured and paid separately

M&L for Cutting the existing GI pipe 25/40 mm bore or screwing existing CI/GI pipe for addn or altn inc providing 25/20mm dia ferrule scrwewed both ends complete all as directed. Note: Necessary earth work shall be measured and paid separately.

M & L for point wiring in replacement with copper conductor cable multistrand, PVC sheathed 1.5 Sqmm size FRLS for one light point / fan point or bell point controlled by one switch including one run of 1.5 Sqmm multistrand FRLS PVC sheathed copper conductor cable for earth continuity in and including PVC casing and capping of approved size,make and quality ISI marked, including providing suitable size of copper lugs and all other required accessories as specified in Preamble 1(a) to (q) of section 19 of SSR Part-II under heading 'Point wiring' fixed on walls/ceiling including sunk cast iron boxes concealing on wall for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover all as specified and directed. Make of wire :- Havells / Polycab/ finolex / Plaza/Grandlay

Supply & Fixing in replacement Switch piano, flush button, single pole one way 5 amps. Make :-Anchor/Cona/Plaza/SSK

Supply and fix in replacement ceiling rose 65X50 mm three terminals with back plate complete all as specified. Make :- Anchor / Cona / Plaza / SSK

Supply and fixing in replacement lamp holder PVC/Polycarbonate type with back plate for batten/angle fitting. Make :- Anchor / Cona / Plaza / SSK

Supply and fixing wall mounted LED integrated batten fitting 10 Watt LED, 2 Feet , PVC extruded and all accessories complete all as specified.

Supply and fixing in replacement LED street light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and fixing 1100 volts grade heavy duty cable PVC insulated, aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, suspended by insulating hangers not more than 1 metre apart, including 4mm dia, GI, suspension wire, one twin core cable flat or circular, stranded conductor 10 Sqmm complete all as specified and as directed by the Engineer-in-Charge.

Supply , insatallation, testing of DP Enclosure 2 way, double door, IP 43 , as per IS 8623 insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles, complete, all as specified and directed by Engr-in-charge.

Supply and fixing inreplacement MCB single pole and neutral 6 to 32 Amps, 240 volts complete all as specified and directed.

M/s. Rishav Sood