Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹51.8 LAccepted-AOC NO 23 MAIN ROAD BALAJI NAGAR PUDUCHERRY 605 013 | PUDUCHERRY | PUDUCHERRY | PUDUCHERRY | 605013 | L1 | Accepted-AOC lowest tenderer |
Tender Value
₹49.5 L
EMD Value
₹98,997
Closing Date
5 Mar 2024, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Executive Engineer, ID., PWD., Puducherry.
The Executive Engineer, Irrigation Division, PWD., No.3, Eveche Street, Puducherry.
Improvements to Vazhudavur surplus course regulator shutter of Suthukeny Channel in Mannadipet Commune, Puducherry-(II Call).
2024_PWDC2_15466_1
TN.10/PW/IRRN/2023-2024-II Call
Open Tender
Civil Works
Item Rate
90 days
Puducherry
Please Refer Tender Documents
3 documents required · 3 mandatory
₹525
₹98,997
6 Dec 2024
23 Feb 2024
6 Mar 2024
23 Feb 2024
5 Mar 2024
23 Feb 2024
Amount
Earth work in excavation by mechanical means (Hydraulic excavation) / manual means over areas ( exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including pumping out any type of water or liquid mud due to stagnation /flowing/seepage and also working in unhygienic and in or under foul/slush condition, in or under water and/or liquid mud including getting out and disposal of excavated earth, slush/mud all leads upto 50m and lifts upto 1.5m depth below or above ground level / Bed level etc, complete all as directed by the Engineer-in-charge. - All kinds of soil.
Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead - in cement mortar
Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead - in cement mortar
Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in - channels,angles,tees and flats
Supplying and filling with quary dust in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth consolidating each deposited layers by ramming and watering etc. complete. The rate includes all lead and lift head load, pumping out any type of water or liquired mud due to stagnation /flowing / seepage and also working in or under foul/Slush condition in or under water and / or liquid mud etc., completed all as directed by the Engineer-in-charge
Extra for providing and mixing ordinary Portland cement 43 grade of approved brand and manufacture in quary rubbish / stone dust at the rate of 3 bags of cement per cum of quary rubbish / stone dust mixing in a mechanical mixer. The rate is inclusive of all lead and lift etc., completed all as directed by the Engineer-in-charge.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)
Centring and shuttering including strutting , propping etc. and removal of form work for - foundations, footings, bases for columns etc., The rate includes all lead, pumping out any type of water or liquid mud due to stagnation /flowing / seepage and also working in or under foul/slush condition in or under water and / or liquid mud etc., completed all as directed by the Engineer-in-charge.- Using steel sheets with MS frames.
Centering and shuttering including strutting , propping etc and removal of form for - Walls (any thickness ) including attached pilasters , butteresses , plinth and string courses etc.
Centering and shuttering including strutting , propping etc and removal of form for - Suspended floors , roofs , landings , balconies and access platform
Providing and laying in position specified grade of reinforced cement concrete , excluding the cost of centering , shuttering , finsishing and reinforcement - All work upto plinth level 1:1.5:3 (1cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in walls (any thickness) , including attached pilasters, buttresses , plinth and sting courses , fillets , columns , pillars , piers , abutments , posts and struts etc. upto floor five level excluding cost of centering , shuttering , finishing and reinforcement - 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)
Reinforced cement concrete work in beams, suspended floors , roofs having slope up to 15degree landings , balconies , shelves , chajjas , lintels , bands , plain window sills , staircases and spiral stair cases upto floor five level excluing the cost of centering ,shuttering, finishing and reinforcement , with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)
Centring and shuttering including strutting , propping etc. and removal of form work for - retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns,piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping,bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc. upto floor five level, excluding the cost of centering ,shuttering and finishing - 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)
Providing and fixing upto floor five level precast cement concrete 1:1.5:3 (1 cement : 1.5 coarse M. sand : 3 graded stone aggregate 20mm nominal size) in slabs, bands, steps solid blocks etc., of various sizes and shapes, pitching the side slopes top of banks, steps, ramps and other similar works including pointing with cement mortar 1:3 (one cement : 3 coarse M. sand) for revetment works, casting in the casting yard hoisting to the laying site with required special tools if any required, cost of required moulding shuttering with M.S sheet of 1.6 mm thick alround L angle of 25X25X5mm etc., complete. The rate including transportation, loading unloading, all head loads, pumping out any type of water or liquid mud due to stagnation /flowing / seepage and also working under foul condition in or under water and / or liquid mud, cost of cement, coarse aggregates, fine aggregates, moulding arrangements for casting the concrete, (Casting shall be done on uniform levelled bed with cement concrete flooring) hire charges for machineries required for mixing the concrete, laying, vibrating to the required strength with vibrator, tractor, tipper, lorry concrete mixer and other tools and plants etc. The rate shall also include hire charges for casting yard, making of casting bed, transportation charges from casting yard to working site, loading and unloading, laying and fixing in position of pre cast slabs pointing to the full depth etc., complete all as directed by the Engineer-in-charge.
Extra providing and laying Ready mix concrete - in all grade of concrete in PCC works / RCC works
Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in position and binding all complete upto plinth level - Thermo -Mechanically treated bars (ISI BRAND OF APPROVED MAKE) Fe - 415 or more
12mm cement plaster of mix -1:4 ( 1 cement : 4 fine sand)
Making of bund wall with HDPE cement bags filled with stone dust/quary rubbish for discharge regulation, breach closing/diversion arrangement. The rate includes head load the cost of empty HDPE bags, cost of stone dust, labour charges for filling the bags and placing in position of its purpose working in or under foul/slush condition, in or under water and / or liquid mud, including pumping out water as required all as directed by the Engineer-in-charge.
Providing and fixing 110 mm dia PVC pipes (4kg / cm2) in weep holes including cement concrete 1:5:10 (one cement : 5 sand : 10 graded stone aggregate ) and filling of pebbles etc.,
Steel work welded in built up sections / framed work , including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder, railings, brackets,gates and similar works
Conveyance of excavated earth with in a lead of 5km radius beyond the initial lead of 50m and filling up in embankments for roads , flood banks , marginal banks etc. in all kinds of soils. The quantity of conveyed earth shall be calculated based on level and the total quantity shall be reduced by 20% for the purpose of payment
Fabrication, supplying and erection of screw Gearing steel shutters size above 2.00m and up to 3.00m width consist of skin plate made out of 10mm thick Mild steel plate and horizontally stiffened with 150 x 75mm ISMB 150 at an interval not more than 0.50m and vertical stiffeners made out of 100 X 50mm mild steel channel (ISMC) at an interval not more than 0.60m and provided with 10mm thick mild steel gusset plate of required size on both sides fastend with rust free bolts and nuts etc., Conveying the fabricated shutter by using lorries including loading, in loading and leading the shutter to the vent. Dismantling the eroded shutter and shuttering arrangements by using necessary gas cutting equipments. Erecting the new shutter and the shuttering arrangements in the vent in proper position by using necessary hoisting equipments. The shutter shall be painted with two coat of anticorrosive black paint over one coat of red oxide primer. The rate including cost of materials, consumables, labours, power charges. Conveyance charges, charges for all equipments required conveying the dismantled materials to the section stores, cost of petty civil works trail operations of shutter and warranty for 5 years etc., complete all as directed by the Engineer-in-charge.
Fabricating supplying and fixing of shutter groove Angle made up of 65x65x6mm mild steel angle for required height including welding hold fast of size 25x25x6mm mild steel angle 2 Nos on both sides and conveying and leading the groove angle to the vents. Fixing the angle to the grooves in proper alignment. Including dismantling the existing damaged groove Angles, conveying and stacking at section store. The groove angle should be painted with two coats of anti corrosive black paint over one coat of red oxide primer. The rate including cost of materials consumables labours charges for all fabricating and hoisting equipments, conveyance petty civil works and warranty for 5 years etc. Complete. all as directed by the Engineer-in-charge.
Over hauling and servicing charges – on steel work for screw rod (100mm dia) Head set assembly including removing and repairing the existing gear box type head set assembly including finishing with epoxy paint (two or more coats) including preparation of surface with appropriate priming coat. The rate includes the cost of labour for over hauling and servicing charges, attending repairs including welding works if required, applying grease / oil for easy operations, cleaning the screw rod completely and re-fix the head set and screw rod in its original position in the gear box stand, with necessary bolt & nuts, conveyance / transportation charges etc., complete all as directed by the Engineer-in-charge.
Fabricating, supplying and fixing of Top Beam made up of 150x75mm (ISMB 150) duly drilled to suit the Head set Assembly with required bed bolt made out of 25mm mild steel round rod duly threaded with suitable anchorage arrangements to a height of 0.60m with necessary fish plate made out of 12mm mild steel plate of size 0.30x0.15m 2 Nos with required holes. Conveying and leading the top beam arrangements to the work site fixing the top beam arrangements and the top of the vent in correct position including dismantling the existing eroded top beam. Conveying and stacking at the section store. The top beam should be painted with two coats of anti corrosive black paint over one coat of red oxide primer. The rate including cost of materials labours, charges for all fabricating and hoisting equipments, cost of petty civil works, conveyance charges for labour and materials and warrenty for 5 years etc. Complete all as directed by the Engineer - in - charges.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .