REPAIR/MAINT OF CERTAIN TECHNICAL ASSETS AT DINJAN MIL STN UNDER GE DINJAN

Amount

Demolition of brickwork built in cement mortar including taking out roots vegetation if any at any position and removal from site, complete all as directed.

Demolition of cement concrete (un reinforced) in ground floors and paving n. exc. 15 cm thickness (below or above ground level) removing rubbish off the premises etc. complete all as directed

Dismantling timber scantlings 40 sq. cm and over in section, in any position of Un-Framed work, complete all as specified and directed.

Dismantling of timber boarding of any description, fixed in any position with nails complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, in roof covering including ridges and keeping serviceable sheets in safe custody for reuse in the work complete as directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/slabs of any thickness including cover fillets complete all as directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) not exceeding 1.50 Sqm each complete all as directed.

Taking down chowkhats or frame with shutters (without taking off shutters from frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as directed.

Taking down the shutters of any description not exceeding 1.00 Sqm each complete all as specified and as directed

Taking down the shutters of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each complete all as specified and as directed

Demolition of stone slabs and tiles of any description or thickness in floors, aprons, wall etc. complete all as specified and directed

Taking down cement plaster or lime plaster on walls /ceiling of any description from concrete or brick wall etc. including raking out joints, hacking for key, scrubbing down with water and disposing off the retrieved debris as directed including necessary scaffoldings etc. complete all as directed

Hacking out old broken glasses (any thickness/type and in any position) from wooden frames/ metal frames fixed with oil putty or beads etc. and removing from site complete all as directed

Taking up or down 15 mm bore steel water tubing galvanised including connections from trenches/wall/floor/ceiling etc. and keeping serviceable quantity in safe custody for re-use at same site or other site complete all as specified and as directed.

Taking up or down 20 mm bore steel water tubing galvanised including connections from trenches/wall/floor/ceiling etc. and keeping serviceable quantity in safe custody for re-use at same site or other site complete all as specified and as directed.

M&L for plain cement concrete type B1 1:2:4 (using 20mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed inclusive of necessary form work complete all as specified and directed.

M&L for brick work with sub class 'B' burnt clay bricks straight or curved on plan exc 6 meter mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with sub class 'B' burnt clay bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.

Cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concrete water tubing or concrete conduit wiring etc. and making good, cutting not exc 10cm girth complete all as specified and as directed.

M&L for second class hardwood, scantlings, wrought, in timber fixed work complete all as specified and directed.

S&F well seasoned second class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F 30 mm thick, second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc, divided in to squares, with plain, chamfered or rounded, mitered and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc. complete all as specified and as directed in SSR Part- I, Section- 8, clause 8.24 (b).

S&F 35mm thick second class hard wood glazed and skelton shutter, open rebated and prepared to receive glass gauze etc, divided into squares (with sash bar), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass exc., size of members of shutter as specified in SSR part-I, sec 8 clause 8.24(a), supplied and fitted to chowkats, complete all as specified and directed.

S&F factory made 35 mm thick, second class hardwood, plain, framed, paneled shutters (any number of panels), with lock rail and panels of 9mm BWP commercial Ply or 12mm thick veneered particle board medium density, with commercial face veneering on both faces. the size of rail and styles 150 & 100mm, kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing, complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing, complete all as specified and directed.

S&F 100 mm long, Aluminium anodized barrel tower bolts of extruded section, and fixed complete all as specified and directed.

S&F 150 mm long aluminium, anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 100 mm size, butt hinges, heavy weight, cold rolled mild steel complete all as specified and as directed.

S&F extruded aluminium alloy handles, fabricated type, anodized, 100 mm size , complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodized, 150 mm long , complete all as specified and directed.

S&F for 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S&F in repairs Aluminium (Extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

S&F stainless steel wire mesh, 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples including necessary welding work complete all as specified and as directed.

S&F in repair stainless steel wire mesh, 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples including necessary welding work complete all as specified and as directed.

S&F mild steel small articles using flat iron of size 25x3mm thick such as band, strap, hold fast, cleat, support, hook, hinges, base tie for door frame etc and other similar items conforming to Fe-290 (Gde E-165) complete all as specified and as directed.

S&F mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) including drilling holes complete all as specified and as directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F aluminium anodised snap grid frame work of size 600mm x 600mm frame work for ceiling with aluminium tee section of size 23.5mm x 26.4mm x 1.4mm thick and aluminium angle section of size 36.5mm x 25mm x 1.4mm thick, for false ceiling including Hangers 4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long including 4 mm thick non asbestos E-board (plain), HSPC fixed to frame including providing two coats of white wash complete all as specified and as directed. Make of E-Board : Everest / Lafarge / Armstrong/ Visaka Industries Ltd.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of profile as approved, any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges/valley gutter, fixed with self tapping screws complete all as specified and as directed. Note : Colour of ridge shall be same colour as that of sheet used for roof.

M&L for 12 mm thick pre-laminated particle board, interior grade, pre-laminated both side with decorative choice laminated fixed with screws to timber frame work as in cup board shutters, partitions and shelves complete as specified and directed.

M&L for 18/19mm thick particle board, medium density, flat pressed single flat pressed, single layer type or three layer type, BWR grade, fixed with screws timber frame work complete all as specified and directed.

M&L for 100 mm thick plain cement concrete (1:2:4) type B2 (using 40 mm graded stone aggregate) as in sub-base of floors, etc. finished the surface of concrete fair and even, complete all as specified and directed.

M&L for 75 mm thick, plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection / hard standing etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand (1:2) complete all as specified and as directed.

M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as sub base of flooring complete all as specified and directed.

M&L for 40mm thick for cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floor finished even and smooth without using extra cement complete all as specified and as directed.

S&F glass dividing strip 3mm thick & 38mm width complete all as specified and as directed.

M&L for coloured 450x300x7-8 mm thick glazed ceramic tiles on vertical surfaces such as skirting, dado and risers to steps etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 10mm thick backing coat in cement mortar (1:4) , complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles with and including 15mm thick screed bed or bedding layer of cement mortar (1:6) for laying of floor finishes complete all as specified and directed.

M&L for vitrified ceramic tiles light shade, 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over 15 mm thick screed bed or bedding layer of cement mortar in (1:6) for laying floor finishes complete all as specified and as directed.

M&L for vitrified, ceramic, coloured (light shade) tiles 10mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm , as in skirting, dado, etc, including 10 mm thick backing of cement mortar 1:4 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block, design & shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. complete all as specified and as directed.

M&L for chequered cement concrete tiles 30cm x 30 cm size, 25 mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry in floor with grey cement mixed with pigments to match with the colour of tiles, laid over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) and finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:6) on fair faces of brick masonry or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5mm thick in cement mortar (1:3) on ceiling surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for applying three coats of white wash on new wall surface including preparation of surface, complete all as specified and directed.

M&L for applying three coats of white wash on new ceiling surface including preparation of surface, complete all as specified and directed.

M&L for preparation old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scraping down, the surfaces covered by smoke soot, growth of moulds and moss, efflorescent, having oil and greases spots and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of newly plastered surface of walls etc and applying two coats of oil bound distemper over a coat of chalk whiting priming paint over 1.50 mm thick wall care putty complete all as specified and as directed.

M&L for preparing old decorated surfaces of walls by complete removal of existing treatment and applying two coats of oil bound distemper over a coat of chalk whiting priming paint over 1.5 mm thick wall care putty complete all as specified and as directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50sqm in each pane , complete all as specified and directed.

S&F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50sqm in each pane including painting/ oiling to new putty to match with the existing /new surface, complete all as specified and directed.

M&L for preparing of old painted wood and wood based surfaces of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing of old steel & iron surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enameled paint complete all as specified and as directed.

M&L for preparing of new steel surfaces of any description , over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M&L for preparation of old treated steel surfaces of roof of any description over 10 cm girth or width and applying one coats of antisol roof paint upto 20 metre height complete all as specified and as directed.

M&L for preparation of new zinc (or galvanised) surfaces to receive painting, by coating with mordant solution including washing and cleaning and applying two coats of antisol roof paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

S&F 15 mm bore, steel tubes, galvanised, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc complete all as specified and directed.

S&F 20 mm bore, steel tubes, galvanised, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc complete all as specified and directed.

Relaying/refixing only old serviceable galvanised steel tubing 15 mm bore in new or old location using new fitting and fixtures complete trenches/walls/floors complete all as specified.

Relaying/refixing only old serviceable galvanised steel tubing 20 mm bore in new or old location using new fitting and fixtures complete trenches/walls/floors complete all as specified.

S&F 16mm bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and directed.

S&F 20mm bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and directed.

Dismantling water tanks and removing to store of (exceeding 251 liter & not exceeding 500 liter capacity) complete all as specified and as directed.

Dismantling water tanks and removing to store of (exceeding 501 liter & not exceeding 1000 liter capacity) complete all as specified and as directed.

S&F 500 liters capacity rotational moulded polyethylene water storage tanks (cylindrical or vertical with closed top) as per IS 12701:1996, hoisted and fixed in position including provision of 20/15mm bore medium grade pipe for connecting inlet, outlet, overflow and washout pipe including 20 mm bore, ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical or vertical with closed top) as per IS 12701:1996, hoisted and fixed in position including provision of 20/15mm bore medium grade pipe for connecting inlet, outlet, overflow and washout pipe including 20 mm bore, ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S&F in repairs, 15mm Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in repair 15 mm bore, Pillar taps, fancy type, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S&F in repairs 15 mm bore dia cast copper alloy fancy type, chromium plated stop valves, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair 15mm bore, Bib tap standard of PTMT any colour screwed for iron pipe and fixed (Minimum weight 15mm - 90gms complete all as specified and as directed.

S&F in repair 450mm long PVC connections 15mm size with PTMT nuts, complete all as specified and directed.

S&F in repairs PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110mm bore, single socketed in any length with rubber ring joints fixed to walls using MS holder bat, fixed complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints fixed to walls using MS holder bat, fixed complete all as specified and as directed.

S&F 110mm bore PVC (SWR) bends any radius with access door, complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius with access door, complete all as specified and directed.

S&F in repairs vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc. complete including making good to disturbed surfaces of floor using concrete (1:2:4) type B0 and to match with existing specifications complete all as specified and as directed.

S&F Vitreous china wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and flushing pipe, anti syphonic pipe including PVC seat and cover complete but excluding flushing cistern & flush pipe including making good to disturbed surfaces of floor using concrete (1:4:8) type D2 and to match with existing specifications including taking down old unserviceable complete all as specified and as directed.

S&F in repairs vitreous china wash basin, size 550x400mm, white, flat back, including 32mm bore PVC (HDPE) waste pipe 450mm long, 32mm bore CP waste coupling, chain, plug and porcelain stopper & brackets including cutting for and pinning in ends of brackets but excluding tap complete all as specified and as directed.

S&F in repair PVC low level flushing cistern, 10 liter capacity, valveless, symphonic action type with inlet, ball valve, float and handle incl bracket, PVC connection pipe and flush pipe of polyethylene of low or high density complete all as specified and as directed.

S&F in repair vitreous china bowl urinal bowl type, of size 465x355x265mm, white (minimum) with grating and union for discharge pipe (excluding flushing cistern but including flush pipe & waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete mortar complete as specified and as directed.

S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

M&L for painting lines, dashes, arrows, letters, etc. or roads pavements and the like exc 10cm wide with white or golden yellow thermoplastic road/runway marking in all respect with 2.5 mm thick layer of marking and 250 gm/sqm glass beads consumed in per sqm ratio all as specified and directed .

Cutting grass/Mud on dispersal area and runway for receiving painting/marking manual and removing materials obtain from cutting /cleaning both side runway complete all as specified and directed. Note : Contractor will arrange his own 02 No's Mazdoor man from 09.00AM to 05.00PM (Incl lunch break of 0.5 Hours at mid day) every day in week excluding Sunday. (Holiday) however department will have the right to stop the work any time even in working day due to security point of view.

S&F in repairs supper flash strip UV resistant self-adhesive flashing bituminous tape for water proofing bonding, sealing for transparent sheets in hanger roof complete all as specified and as directed.

Cutting grass, small trees, bushes by mechanically operated 50mm to 100mm slasher from 9.00 AM to 05.00 PM (half an hour lunch break at mid day) both sides of concrete pavement edges and removing the same to a distance not exceeding 50m and depositing as directed. Note :- Contractor will have to arrange at his own the mechanical slasher ie one set of tractor and jungle jeep including POL driver. Mechanical slasher shall be deployed every day except Sunday/Holiday. However Department shall have reserved the right to stop the work at any time even in working day due to security reason and no extra claim on this shall be entertained.

M&L for raking of joint/removing old any sealing compound, dirt from expansion joints 25mm wide (+3mm) and 40 mm deep, cleaning the joint sides properly by mechanical means with diamond cutter, filling the joints with closed cell, medium density, cross linked polyethylene foam backup rod of 20mm dia and applying bond breaker tape on top of backup rod for complete width of the joints priming top with specified primer suitable for polysulfide sealing compound and filling polysulfide based sealant, 10mm thick including using masking tape on edges of joints to avoid accidental spillage of sealant on top of surface of pavements complete all as specified and directed.

M&L for raking of joint/removing old any sealing compound, dirt from dummy / construction joints 10mm wide (+3mm) and 30 mm deep, cleaning the joint sides properly by mechanical means with diamond cutter, filling the joints with closed cell, medium density, cross linked polyethylene foam backup rod of 10mm dia and applying bond breaker tape on top of backup rod for complete width of the joints, priming top with specified primer suitable for polysulfide sealing compound and filling polysulfide based sealant, 10mm thick including using masking tape on edges of joints to avoid accidental spillage of sealant on top of surface of pavements complete all as specified and directed.

M&L for raking of joint/removing old any sealing compound, dirt, upto average depth of 30mm from dummy / construction joints of a average width 12mm wide (+3mm) cleaning the joint sides properly by mechanical means with diamond cutter, filling the joints with closed cell, medium density, cross linked polyethylene foam backup rod of 15mm dia and applying bond breaker tape on top of backup rod for complete width of the joints, priming top with specified primer suitable for polysulfide sealing compound and filling polysulfide based sealant, 13mm thick including using masking tape on edges of joints to avoid accidental spillage of sealant on top of surface of pavements complete all as specified and directed.

EM PORTION: Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

Taking down sub main wiring/ service connections of any size with conduit/ casing caping complete including removal from site and making good disturbed surface of walls/floors etc complete all as specified and directed.

M&L for point wiring with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead in and including PVC rigid casing caping (medium grade) with all fittings & accessories including provn of MS sunk terminal box of minimum thickness 1.6 mm fixed flush to wall for mounting switch, socket, fan regulator etc with 3mm thick hylum sheet top cover with screws & cup washers for one light / fan point / complete. NOTE : Cost of making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates.

All as per Item No.108 above but for One 2/3 pin socket outlet 5/6Amps on independent board

All as per Item No.108 above but for One 2/3 pin socket outlet 5/6 Amps on the same board with other switches.

All as per Item No.108 above but for one switch socket combination 15/16 Amps on independent board with cable 2.5 sq mm size and earth wire 2.5 sqmm

M&L for concealed point wiring with two runs of FRLSH PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead, drawing through in and including PVC rigid conduit of size not less than 20mm, with all fittings & accessories including provn of MS sunk terminal box of appropriate size suitable for switch fixed flush to wall for mounting switch, sockets, fan regulators etc with 3mm thick hylum sheet top cover with screws & cup washers for one light / fan point / call bell controlled by one switch one way 5 Amps complete all as specified and directed . NOTE : Cost of cutting, chiseling, and making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates..

All as per Item No.112 above but for One 2/3 pin socket outlet 5/6Amps on independent board

All as per Item No.112 above but for One 2/3 pin socket outlet 5/6 Amps on the same board with other switches.

All as per Item No.112 above but for one switch socket combination 15/16 Amps on independent board with cable 2.5 sq mm size and earth wire 2.5 sqmm

S&F switch piano, flush type single pole, 230 volts, 5 Amp two way bearing ISI marked complete all as specified and as directed.

S&F Socket outlet 5 in 1, 5 Amp flush type universal, 240 volts, complete all as specified all as directed.

S&F Switch socket combination 3/5 pin, 2 in 1, 5 Amps flush type, 240 volts, complete all as specified all as directed. .

S&F Switch socket combination multipurpose 3/5 pin, 15/16 Amps, 5 in 1, flush type, 240 volts, complete all as specified all as directed. .

S&F Bell Push Flush type 5 Amp, 240 volts, complete all as specified all as directed.

S&F Bell Ding-Dong AC 230 V Single Pole complete all as specified and as directed.

S&F ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body bearing ISI marked and including PVC box complete all as specified and as directed.

S&F electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 sweep/1400 mm, 120 Watt complete all as specified and directed.

S&F lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings including fixing for one 9 Watt LED Lamp complete all as specified and as directed.

S&F LED lights fitting 1x 18/20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F in repair PVC rectangular block for mounting, MCB DB's etc. with 3 mm thick plastic laminated sheet cover of size 250 mm x 200 mm and 50 mm deep complete all as specified and as directed

S&F in repair PVC rectangular block for mounting, MCB DB's etc. with 3 mm thick plastic laminated sheet cover of size 175 mm x 100 mm and 50 mm deep complete all as specified and as directed.

S&F in repair PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep, complete all as specified and as directed

M&L for sub main wiring with two run of 6 Sqmm (Nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables (FRLSH), 1100 Volts grade drawn through PVC Conduit of suitable size, fixed on surface of wall/ceiling etc with all necessary fittings and accessories and one run of 6 Sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor (FRLSH) as earth wire and duly connected to common earth point complete all as specified and as directed. Note : (a) PVC Casing-caping/conduit, two run wiring cables and one run of earth wire will be measured as one length (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets.

M&L for sub main wiring with two run of 4 Sqmm (Nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables (FRLSH), 1100 Volts grade drawn through PVC casing-caping of suitable size, fixed to wall/ceiling etc with all necessary fitting and accessories etc including one run of 4 Sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor (FRLSH) as earth wire and duly connected to common earth point complete all as specified and as directed. Note : (a) PVC Casing-caping/conduit, two run wiring cables and one run of earth wire will be measured as one length (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets.

M&L for sub main wiring with two run of 2.5 Sqmm (Nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables (FRLSH), 1100 Volts grade drawn through PVC casing-caping of suitable size, fixed to wall/ceiling etc including one run of 2.5 Sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor (FRLSH) as earth wire and duly connected to common earth point complete all as specified and as directed. Note : (a) PVC Casing-caping/conduit, two run wiring cables and one run of earth wire will be measured as one length (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets.

S&F in repairs switch piano, flush type, 5 Amps, single pole, one way, bearing ISI marked 240 Volts complete all as specified and as directed.

S&F in repair socket outlet, 3/5 pin , 5 Amps, flush type bearing ISI marked complete all as specified and as directed.

S&F in repair switch socket combination 2 in 1, 5 pin, 5 Amps, flush type, bearing ISI marked 240 volts complete all as specified and as directed.

S&F in repair switch socket combination 2 in 1, 6 pin, 6/16 Amps, flush type, bearing ISI marked 240 volts complete all as specified and as directed.

S&F in repairs bell push, flush type, 5 Amps 230 Volts bearing ISI marked complete all as specified and as directed.

S&F in repairs call bell , AC 230 Volts, single pole all as specified and as directed.

S&F in repair ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body bearing ISI marked and including PVC box complete all as specified and as directed.

S&F in repair stepped type (five steps), electronic fan regulator, flush type (socket type) complete all as specified and as directed.

S&F in repairs 10 Watt recess mounted pressure die-cast LED aluminium luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation with separate replaceable electronic driver included cutting/opening of ceiling any type & fixing arrangement for light fitting complete all as specified and as directed.

S&F in repair 18 Watt, surface and wall mounted LED Batten Inverter type with minimum 04 hours backup with polycarbonate housing and integrated complete all as specified and as directed.

S&F in repair 9 Watt, surface and wall mounted LED Batten Inverter type with minimum 04 hours backup with polycarbonate housing and integrated complete all as specified and as directed.

S&F in repairs 35 Watt LED building security light new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having BOTTOM OPENING separate driver compartment with IP65 protection and impact resistance of IK07 complete all as specified and as directed.

S&F in repairs 12 Watt LED surface mounted down light with white powder coated polycarbonate housing and pressure die cast heat sink having high efficiency round including taking down unserviceable light fitting complete all as specified and as directed.

S&F in repair for lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings including fixing for one 9 Watt LED Lamp complete all as specified and as directed.

S&F in repair 3 mm thick, PVC hylem sheet top cover of size 250 mm x 200 mm x 3 mm complete all as specified and as directed.

S&F in repair 3 mm thick, PVC hylem sheet top cover of size 175 x 100 x 3 mm complete all as specified and as directed.

S&F in repair 3 mm thick, PVC hylem sheet top cover of size 100 x 100 x 3 mm complete all as specified and as directed.

S&F in repair MCB distribution board TPN 4 way double door, sheet steel, phosphatised, powder coated with 200 amps bus-bar, neutral link, earth bar and din rail, 415 V, complete all as specified and directed. by Engineer-in-charge.

S&F in repair MCB distribution board SPN 8 way double door, sheet steel, phosphatised, powder coated with 200 amps bus-bar, neutral link, earth bar and din rail 240 V , complete all as specified and directed. by Engineer-in-charge.

S&F in repair MCB distribution board SPN 4 way double door, sheet steel, phosphatised, powder coated with 200 amps bus-bar, neutral link, earth bar and din rail 240 V , complete all as specified and directed. by Engineer-in-charge.

S&F in repair sheet metal enclosure for MCB DB double door single pole & neutral 2 way, 240 V with common bus bar at incoming end complete all as specified and as directed.

S&F in repair MCB, four pole, 415 Volts, 63 Amps, breaking capacity 10 KA complete all as specified and as directed.

S&F in repair MCB Single pole and neutral, 6 to 32 Amps, 240 volts 10 KA rupturing capacity, C series complete all as specified and directed by Engr-in-charge.

S&F in repair MCB Single pole, 240 volts 6 to 32 Amps 10 KA rupturing capacity, C series complete all as specified and directed by Engr-in-charge.

S&F in repair MCB Single pole, 240 volts 40 to 63 Amps 10 KA rupturing capacity, C series complete all as specified and directed by Engr-in-charge.

M&L for earthing complete with GI earth plate electrode 600mm x 600mm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25m below ground level with the top edge of earth plate at depth not less than 1.5m below ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers protected by 15mm bore light grade GI pipe, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C-1, pre-cast RCC 1:2:4 type B-1 cover slab of size 350x350x50mm reinforced with 8mm dia TMT steel bars @ 15cm centre to centre in both direction and 10mm dia MS handle of suitable size, charcoal or coke and salt in alternative layers, necessary earth work in soft/loose soil all as shown in Electrical Plate No 3 of MES Schedule Part I and testing the base in which pit cover rests made up of MS angle iron (Frame) complete as specified and as directed.

S&F in repair LED street light fitting of capacity 120W, aerodynamically designed for all weather conditions with excellent thermal management, made up of pressure die cast housing with toughened glass and high power LED's with secondary optics and IP66 protection. 10 KV SPD included, Efficacy ≥110/120 LPW and three core copper cable of 2.5 Sqmm as required in existing location complete all as specified and as directed.

S&F in repair LED street light fitting of capacity 90W, aerodynamically designed for all weather conditions with excellent thermal management, made up of pressure die cast housing with toughened glass and high power LED's with secondary optics and IP66 protection. 10 KV SPD included, Efficacy ≥110/120 LPW and three core copper cable of 2.5 Sqmm as required in existing location complete all as specified and as directed.

S&F in repair LED street light fitting of capacity 60W, aerodynamically designed for all weather conditions with excellent thermal management, made up of pressure die cast housing with toughened glass and high power LED's with secondary optics and IP66 protection. 10 KV SPD included, Efficacy ≥110/120 LPW and three core copper cable of 2.5 Sqmm as required in existing location complete all as specified and as directed.

S&F in repairs integral compact wide beam high performance 200 W LED flood light luminaire made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP66 protection. System efficacy ≥ 110/120LPW 10KV SPD including connecting up with 2.5 Sqmm multistranded copper conductor cables of suitable length with fixed to pole/wall, etc and testing complete all as specified and as directed.

S&F in repairs integral compact wide beam high performance 100 W LED flood light luminaire made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP66 protection. System efficacy ≥ 110/120LPW 10KV SPD including connecting up with 2.5 Sqmm multistranded copper conductor cables of suitable length with fixed to pole/wall, etc and testing complete all as specified and as directed.

S&F LED luminaire micro motion sensor based 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. complete all as specified and as directed.

S&F LED 60 watt Flameproof Higbay wellglass in die cast Aluminium housing with heat resistant toughened glass including taking down complete all as fixing arrangement complete all as specified and as directed.

Taking down LED taxi/edge way lights carefully from site, shifting to the worksite including removing the burnt out PCB / driver unit completely and replacing / modification with new integrated high quality driver on board (DOB) MCPCB , lumen 300Lm, 3 Watts LED with operating voltage 220- 240 V AC , chipboard of high quality aluminium plate use to heat shrink paste energy efficient (average life 25000 Hrs) complete including testing and commissioning with necessary electrical connection and fixing all as specified and as directed.

S&F in repair 12 Watt aviation obstruction light, yellow painted, die-cast aluminium alloy housing, heat resistant, clear thick glass and accessories with neon lamp including fixing arrangement and connection complete all as specified and as directed.

S&F new LED elevated Taxiway edge lights 12W with inbuilt integrated driver, 220-240VAC, 50-60Hz shall made of aluminium alloy with LED covered with borosilicate glass of yellow in colour duly sealed with silicon rubber with connected base plate for mounting aluminium alloy as per OEM complete embedded on concrete block complete all as specified and as directed. Rates deemed to be incl of concrete block, making good the area etc including taking down complete all as directed by Engr-in-charge.

Supply, jointing and testing XLPE cable straight through joints including jointing materials and accessories complete, heat shrinkable outdoor cable joint kit suitable for XLPE 1100 Volts (Earthed) cable of size 25 Sqmm to 50 Sqmm 3.5 / 4 Core complete all as specified and as directed. Note : Excavation and earth work shall be included in quoted rate.

Taking out unserviceable automatic shutter motor of capacity 2HP Single phage of Hanger, rewinding, replacement of minor items like bearing, capacitor, greasing and fixing its in original position for smooth function of shutter with greasing of shutter channel and gear, complete all as specified and directed.

S&F Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A, 250V, 2P+earth complete all as specified and directed.

Construction House (BID ID -3394986)

AFTAB ENTERPRISES (BID ID -3396540)

M/s GANDHESWAR PHUKAN (BID ID -3398993)

M/S CHANDAN ENTERPRISE (BID ID -3396944)

STANDARD ELECTRIC WINDERS (BID ID -3396994)

FREEZCON (BID ID -3395524)

M/S BISWAJIT SINGH (BID ID -3398359)