PROVISION OF GUARD ROOM, SENTRY POST, CEILING FANS, WALL MOUNTED FANS, EXHAUST FANS, GEYSERS and SPECIAL REPAIRS TO BLDG NO T-26 AT AURANGABAD UNDER GE (SOUTH) AHMEDNAGAR

Amount

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for pipe line or for manholes not exc 10 Sqm on plan and not exc 1.5m in depth in hard/dense soil and getting out all as specified.

Plain cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in foundations filling and mass concrete complete all as specified.

Reinforced cement concrete M-25 (design mix) using 20 mm graded crushed stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases of columns etc. complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work vertical or to batter complete all as specified.

Reinforced cement concrete M-25 (design mix) using 20mm graded crushed stone aggregate as in Columns, pillars, piers, posts and struts etc. complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns etc. complete all as specified and directed by Engineer-in-Charge.

Reinforced cement concrete M-25 (design mix) using 20mm graded crushed stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5 m span etc. complete all as specified and directed.

Formwork to sides and soffits of floor or roof beam, beam hauchings, girders, bressum-mers, lintels cantilevers, shelves including supports complete all as specified.

Reinforced cement concrete M-25 (design mix) using 20 mm graded crushed stone aggregate as in Chajjas etc. complete all as specified and directed.

Formwork to chullah hoods, chajjas, troughs and similar items including edges including supports complete all as specified and directed.

Reinforced cement concrete M-25 (design mix) using 20 mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping) complete all as specified and directed.

Form work to sides of slab exc 10 cm but not exc 20 cm wide for rough finished surfaces of concrete complete all as specified and directed.

TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia complete all as specified and directed.

TMT bars 5 mm dia and over upto and including 10mm dia in stirrups, spacers and binders and binding with and including mild steel wire(annealed) not less than 0.90mm dia as in stirrups, complete all as specified and directed.

Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius half brick walls built in cement mortar 1:4 complete all as specified and directed.

M & L for Rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and fair complete all as specified and as directed.

M & L for Rendering 10 mm thick in CM 1:6 on other than fair face of brick work surfaces of walls or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 5 mm thick in CM 1:3 on fair faces of soffits of slabs etc and finished even & smooth complete all as specified and as directed.

2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

Mild steel flat iron as in hold fasts and similar small articles fixed to chowkats, conforming Fe-290 Gde E-165, complete all as specified and directed.

35 mm thick 2nd class hard wood (kail) plain, framed, panelled door shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and as directed.

30 mm thick second class hard wood (Kail) Glazed and Skelton shutters, open rebated and prepared to receive glass, gauge etc ( with out sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (b) supplied and fitted to chowkats complete all as specified and directed and as directed.

3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane etc. complete all as specified and as directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C channel having a PVC sheet strip of 20mm width shirk inside with solvent cement for stiles and plan colour PVC sheets for top rail, lock rai & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

Mild steel barrel tower bolt, stove enamelled black, with bright bolt of 150 mm long complete all as specified and directed.

Mild steel barrel tower bolt stove enamelled black, with bright bolt of 100mm long complete all as specified and directed.

Mild steel sliding door bolts, stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolts plate and two on staple plate, 250mm long, all as specified and directed.

Butt hinges, medium weight, cold rolled mild steel, 100mm long and fixed complete all as specified and as directed.

Butt hinges, medium weight, cold rolled mild steel, 75 mm long and fixed complete all as specified and as directed.

Mild steel pressed handles, oval type, stove enamelled black, 150mm size, complete all as specified and directed.

Mild steel pressed handles, oval type, stove enamelled black, 100mm size, complete all as specified and directed.

Returning, filling in (soil) including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in any type of soil all as specified and directed.

Removal of excavated material (soil) to a distance not exceeding 50 metre and dispositing where directed at a level not exceeding 1.5m above the starting point all complete as specified and directed.

Moorum / red bajri filling in floors or Pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete as specified and directed.

Hard core of broken stone/boulders of gauge n exc 63 mm deposited spreed and leveled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

100 mm thick PCC 1:3:6, type C-2 (by using 40mm graded aggregate) as in base/sub base of flooring etc complete all as specified and as directed.

75 mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection surfaces finished even and fair complete all as specified and as directed.

Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and as directed.

Preparation of newly plastered ceiling surfaces and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and as directed.

Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.

Preparation of new wood or wood based surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Steel ventilators, fixed type, with glazing bars etc complete all as specified and as directed.

Preparation of new steel surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

15 mm bore medium grade galvanised steel water tubing with all fittings and fixed complete to wall and ceiling or laid in floors etc. complete all as specified and as directed.

20 mm bore medium grade galvanised steel water tubing with all fittings and fixed complete to wall and ceiling or laid in floors etc. complete all as specified and as directed.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 ltr capacity hoisted and fixed in position all as described in SSR Part I and complete all as specified and as directed.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 ltr capacity hoisted and fixed in position all as described in SSR Part I and complete all as specified and as directed by Engr-in-charge

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 300 ltr capacity hoisted and fixed in position all as described in SSR Part I and complete all as specified and as directed.

15 mm bore bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed etc. complete all as specified and as directed by Engr-in-charge

Pillar taps 15 mm bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without letted 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc. complete all as specified and as directed.

Stop valve 15 mm bore cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed etc. complete all as specified and as directed.

15 mm bore gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, fixed complete all as specified and directed.

20 mm bore globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

PVC connection 15 mm bore, 450 mm long including brass check nuts at both ends screwed for iron pipe complete all as specified and as directed.

75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in floors complete all as specified and as directed.

110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in floors complete all as specified and as directed.

110 mm bore PVC (SWR) bends, any radius, fixed and jointed complete all as specified and as directed by Engr-in-charge

Slotted vent cowl 100 mm bore, fixed in position complete all as specified and as directed.

75 mm dia outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement and fixed in position including PCC 1:2:4, type B1, complete all as specified and as directed.

PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement and PCC 1:2:4, type B1, complete all as specified and as directed.

Soap dish fixed in position with chromium plated brass screws complete all as specified and as directed.

Aluminium anodised Tubular towel rail, 20 mm dia, D type, 60 cm long between flanges fixed with screws and gutties complete all as specified and as directed.

PVC waste pipe 32 mm bore PVC flexible with plastic check nut for WHB and sink complete all as specified and as directed.

Wash basins, Vitreous China (flat back or angle back type) of size 550 mm x 400 mm, including cutting for and pinning in ends of brackets or erecting stand including waste coupling CP and waste / vent pipe and brackets but excluding taps, complete all as specified & directed.

Water Closet vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as directed.

Vitreous China Urinal, Half stall type, (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; including provoding and fixing 5 ltr capacity automatic PVC flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and as directed.

PVC valveless, syphonic action type, flushing cistern 10 litres capacity low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

20 mm bore aluminium powder coated curtain rods for pelmets etc, fixed in position complete all as specified and as directed.

Vitrified Ceramic tiles (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick cement screed bedding in CM 1:4 complete all as specified and as directed.

Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15 mm thick cement screed bedding in CM 1:4 complete all as specified and as directed.

Glazed Ceramic coloured tiles in vertical surface (skirting/dado), size of tiles 450 mm x 350 mm x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick cement plaster backing in CM 1:4 complete all as specified and as directed.

20-25mm thick Machine cut kota stone slab flooring laid over and including 15 mm thick cement screed bedding in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified and as directed.

20-25 mm thick Machine cut kota stone on vertical surface such as skirting/ dado laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 10 mm thick cement screed backing in CM 1:4 complete all as specified and as directed.

Septic tank including inlet & outlet chambers for 25 users, brick construction (with top of slab at ground level) including necessary excavation and earth work in any type of soil and disposal of surplus soil to a distance not exc 50 m, bricks work in sub class 'B' bricks built in CM (1:4), RCC as in slab including RCC manhole covers factory made ISI marked conforming to IS 12592 with angle iron frame 100 mm bore cast iron sand cast vent pipes with cast iron cowls complete all as specified and shown in drawing No. CEPZ/88/TD/17M dated 01 Oct 88, sheet 1/4 to 4/4.

Soakage well 1.20 m dia and 3.00 m deep below inlet pipe level (depth from inlet pipe to ground level 45 cm) including excavation and earth work in any type of soil filled with brick bats, RCC slab with RCC manhole cover factory made ISI marked conforming to IS 12592 fixed in angle iron frame, SWG single junction inlet filling around slab in slopes and disposal of surplus soils to a distance exceeding 50 m but not exceeding 100m complete all as specified and shown in drawing no.CEPZ/2004/TD/8 Sheet No. 1/1, dated 30 Jun 2004

150 mm internal dia reinforced cement concrete pipes of approved make , class NP2, laid and jointed in cement mortar with collars (PCC shall be measured and paid for seperately under respective item) complete all as specified & directed.

PCC 1:4:8 type D-2, using 40 mm graded stone aggregate as in concrete bed to drain pipes, any type, of 150 mm internal dia including packing under and hunching against the sides of the pipes after they are laid & tested complete all as specified and directed.

Chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 20 mm thick screed bed or beding in CM 1:6 etc. complete all as specified and as directed.

APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid on primed surfaces by torch application complete all as specified and diercted.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and diercted.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strenght of 550 Mpa as in roof covfering/cladding to wall, fixed with self tapping screws etc completed all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc completed all as specified and directed.

Dismantling cast iron/wrought iron or mild steel work of any description not otherwise provided for etc completed all as specified and directed.

Roof truss (Framed) trussed purlines,plates, crane gantries, rails and fastenings and heavy bracket framing (Beam,Tee, Angle, channel or flat sections) including distance pieces cleats etc. (Fe 410-W (Gde-E- 250) quality complete all as specified and directed.

Re-fixing of Roof truss (Framed) trussed, Purlines,plates, crane gantries, rails and fastenings and heavy bracket framing (Beam,Tea, Angle, channel or flat sections) including distance pieces cleats etc. (Fe 410-W (Gde-E- 250) qualited etc complete all as specified and directed.

Preparation of old painted steel surfaces of any description exc. 10 cm width or girth and applying a coat of synthetic enamel paint completed all as specified and directed.

Demolition of brick/block work or stone boulder masonry built in cement mortar etc completed all as specified and directed.

Taking down cement or cement lime plaster on brick/stone walls etc. including racking out joints hacking for key scrubbing down with water etc etc completed all as specified and directed.

Supply only water proofing compound complete all as specified and directed.

Preparation old plastered/decorated surfaces of walls and applying one coat of cement base paint completed all as specified and directed.

Complete removal of existing treatment from old decorated plastered or unplastered wall surfaces and applying two coats of distemper oil emulsion over a coat of chalk whiting including preparation of surfaces etc completed all as specified and directed.

Demolition of unreinforced cement Concrete of any description and any position not otherwise specifically provided for etc completed all as specified and directed.

75 mm thick PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in base/sub base of flooring etc complete all as specified and as directed.

PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) as in coping, lintels and bed blocks including form work etc completed all as specified and directed.

Dismantling snap grid ceiling including wall and ceiling board (fiber, pulp, insulation etc) or insulation board any thickness and any type including cover fillets etc and keeping safe for refixing complete all as specified and directed.

Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flangesof 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 600 mm centre to centre.incl necessary fixing/ repair /replacement of existing electrical fittings at site complete all as specified and directed.

Hangers made out of 6 mm dia GI wire (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI flat 40 x 3 mm size 60 mm long and expension hold fasteners 12.5 mm dia. 40 mm long complete all as specified and directed.

Gypsum board 12 mm thick for insulation and accoustic purposes, 60 cm x 60 cm in size, fixed with clips / screws frame work or with staples on snap grid complete all as specified and directed.

Taking down chowkats with shutters (with out taking off shutters from the frame) nexc 1.5 sqm etc completed all as specified and directed.

Steel window with side hung shutters glazed or gauzed incl projecting type hinges, 10mm round guard bars, steel handles & peg stay & hold fast etc complete with glazing bars dovetailed or welded etc completed all as specified and directed.

Excavation over areas, n exc 1.5 m deep and getting out in soft/loose soil complete all as specified and directed.

100 mm thick PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in sub base of flooring complete all as specified and directed.

Precast cement concrete interlocking tiles (glossy finish/ rubber mat finish) of 60 mm thick ,hydraulically pressed cemented tiles of grey colour with pigments,(glossy finish/ rubber mat finish) factory made, M-35 grade conforming to IS-15658-2006, as in floor laid over & including 25 mm thick sand cusion and including filling of interstices with fine sand complete all as specified and as directed by Engineer-in-charge. Note Size, shape & pattern of tiles shall be as decided.

Precast cement concrete solid block masonary using solid block of grade C-5 (1:5:8) exc 10 cm in width, built in CM 1:6 complete all as specified and direted.

50 mm thick PCC 1:2:4, type B2 (using 40 mm graded aggregate) as in flooring finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying three coat of white wash complete all as specified and directed.

Excavation in post holes or similar holes, each not exveeding 0.5 Cu.M, getting out in Soft/Loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exceeding 50 M and making good surface complete all as specified and directed.

Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FR type drawn through and including PVC casing and caping (ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, coloumns/ beams alongwith 1.5 Sqmm (nominal area) copper conductor cable (multistranded) PVC insulated and unsheathed as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC folding boards or wooden boards with sunmica top for mounting switches, sockets, fan regulators, accessories etc for one light/fan point controlled by one, one way switch complete all as specified and directed.

All as per serial item no.1 here-in-before but for One 5 Amp 5 pin socket outlet point on independent including earth wire complete all as specified and directed.

All as per ser item No. 1 here-in-before but point wiring with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 4 Sqmm FRLS type copper stranded conductor as earth wire & connected to commen earth & earth terminals including PVC/wooden folding boards for mounting purposes complete all as specified and directed.

Switch piano flush button single pole one way 5 amps,230 volts, fixed complete all as specified and directed.

Switch piano flush button single pole one way 15 amps, 230 volts fixed, complete all as specified and directed.

Socket outlet 3 pin, 5 Amp multipurpose flush type, fixed complete all as specified and directed.

Socket outlet 2 in 1, 3 pin, 5 & 15 Amp flush type, fixed complete all as specified and directed.

Ceiling rose surface bakelite 65 x 50 mm, 2 to 3 terminals, polycarbonate / PVC / isolated body, fixed complete all as specified and directed.

LED ultra slim edelit downlighter 18W, 220 V AC white powder coated Aluminium housing recess mounting of Make Surya Cat Part No G-Panel (Rd)12W or equivalent complete all as specified and directed.

MCB SPN 32 Amps, 10 KA single pole AC 230 volts complete all as specified and directed.

Sheet metal enclosures, factory made, SPN 8 way double door 240 v with 200 Amps rated bus bar for DB,s suitable for having MCB / Isolator flush with wall complete all as specified and directed..

MCB SP, 6 to 32 Amps 10 KA single pole AC 230 volts, fixed in repairs complete all as specified and directed.

Earthing complete with galvanized steel earth plate electrode 600 X 600 X 6 mm thick, buried directly in ground earth pit not less than 2.25 meter in depth with top edge of the plate not less than 1.5 meter below normal ground level, connected to galvanized iron wire 4 mm dia earthing lead by means of bolts, nuts, check nuts and washers of galvanized iron as required, including watering arrangement with 20 mm bore medium grade GI tubing, funnel and wire mesh, PCC chamber with CI frame and cover , necessary excavation, returning filling and removal of surplus soil, filling of charcoal and salt in alternate layer complete all as shown in plate No 5 of MES Schedule Part I including testing complete all as specified and directed.

Fan regulator rotary stepped type electronic flush type, AC 240 V, fixed complete all as specified and directed.

Submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade cables 2.5 Sqmm drawn through in and including rigid PVC heavy duty surface conduits including 2.5 Sqmm 1100 Volts grade PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified & directed.

Submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade cables 4 Sqmm drawn through in and including rigid PVC heavy duty surface conduits including 4 Sqmm 1100 Volts grade PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified & directed.

Exhaust fans AC single phase 230/ 240 V of size 300 mm sweep metallic body copper wound with self opening and closing louvers for protection from birds and rain water , fixing by means of rugged bolts, nuts and washers etc. and foundation brackets, making connection from ceiling rose to fan with and including 1.5 sqmm conductor cable including making hole in existing stone masonary/ brick wall complete and testing at site complete all as specified and directed.

LT XLPE insulated, PVC sheathed,galvanized steel strip or wire armoured, heavy duty, electric cable with aluminium conductor of size 10 sqmm 2 core,1100 volts grade conforming to relevant IS, ISI marked, laid in trenches / wall / floor/ poles etc ,complete including making connection using suitable size aluminium lugs including testing and commissioning complete all as specified and directed by Engineer-in-charge. (Excavation/earth work, sand cushioning and cable covers shall be measured and paid for separately under respective item).

Sand cushioning to under ground cable with a layer of fine river sand 8 cms thick before laying of cables and 15 cms thick after laying of cable in trenches complete all as specified and directed.(For payment prooned down thickness of 18 cm shall be considered)

Unreinforced factory made precast concrete cable protection covers class LV type-2, flat, of size 250 mm x 150 mm x 40mm, ISI marked, laid complete all as specified and directed.

High power LED bldg street light fittings 35/36W including service bracket and clamps and necessary items including making connection with suitable size copper conductor cable complete all as specified and directed.

Ceiling fan with all accessories 230 V,1200 mm sweep, BEE 5 star rated including making connection from ceiling rose to fan with and including 1.5 sqmm copper conductor cable complete all as specified and directed.

Heavy duty metalic body wall mounted air circulating fan 300 mm sweep with regulating switch complete all as specified and directed.

Sheet metal enclosures with plug socket single pole and neutral with two pin and earth plug and with one MCB of 20 Amps (SP), fixed in replacement complete all as specified and directed.

Water heater storage type (geyser), electric 25 Ltrs capacity BEE 5 star rating complete including fixing arrangement with achoring bolts, GI pipe of suilable length, PVC pipe and other accessories as per site requirement complete complete all as specified and directed. Make : Havells/Bajaj /Crompton

20 mm bore bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed etc. complete all as specified and as directed.

Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed of size 15 mm bore complete all as specified and directed.

25 mm bore medium grade galvanised steel water tubing with all fittings and fixed complete to wall and ceiling or laid in floors etc. complete all as specified and as directed.

50 mm bore medium grade galvanised steel water tubing with all fittings and fixed complete to wall and ceiling or laid in floors etc. complete all as specified and as directed.

25 mm bore globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

50 mm bore globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Cutting existing water main 100 mm bore and tapping with provision of specials such as reducers, joints including excavation & earth work complete all as specified and as directed.

Construction of valve chamber of size 900 mm x 900 mm x1000 mm including MS cover complete without distrubing the existing pipe lines valves and constructing new valve chamber including necessary earth work in any type of soil ,PCC 1:3:6 in base concrete 100 mm thick ,brick work in CM (1:6) with 10 mm thick plaster internally and 15 mm thick externally in CM (1:4) ,6 mm thick MS sheet cover with hinges and locking arrangements fixed to angle iron frame made out of 50 mm x 50 mm x 6 mm MS angle complete with two coats of synthetic enamelled paint over a coat of red oxide on all steel work and three coats of white washing on plastered surface of valve chamber complete all as specified and directed.

Reverse Osmosis+Ultra Violet purifying system including complete accessories such as pre filter, carbon filter, membrance, UV, dozing sys and pressure system of capacity 25 LPH, Duty Cycle 6 Hours (max) for mounted on steel frame/wall complete including fixing, testing and commissioning complete all as specified and directed Make :- Aquguards/Kent/Renuka/Declibac

Voltage stablizer for automatic operation,copper wound, single phase, naturally air cooled, indoor type and designed for input variation between 170V to 230V with output voltage stablized at 230V with accuracy of +- 2.5% and of capacity 1 KVA all as specified and directed.

Steel staging made out of 65 mm x 65 mm x 6 mm thick angle iron complete including necessary cutting, welding, grinding, earth work and grounting with PCC 1:3:6 in a four legs of staging of size 450x450x600mm thick for mounting of 500 Ltrs tank and complete installation with necessary inlet and outlet connection carefully at site including testing complete all as specified and directed.

DP 32 amps, 240 V, fixed complete all as specified and directed.

Sheet metal enclosures, factory made, SPN 4 way double door 240 Volt with 200 Amps rated bus bar for DB,s suitable for having MCB / Isolator flush with wall complete all as specified and directed.

Rolled Mild steel Plates (plain or Chequred) channels, square cut or notched, forming holes, with riveted, bolted or welded attachment confirming to Fe 410 - O or Fe 310 - O complete all as specified and directed.

M/s S.R lahoti

M/s JAYPEE ENTERPRISES

G.M. Construction

M/s.M G Kulkarni