Construction of new class room at Thiruvithancode Govt. Higher Secondary School premises at Thiruvithancode Town Panchayat MLA Fund Work

Amount

Earth work excavation for foundation in all soils such as red earth ,hard stiff clay soil, stiff black cotton soil, hard redearth, shales, murrams, gravel, hard rock not requiring blasting ete complete.,

Cement concrete 1:4:8 mix using 40 mm HBGS metal inculding cost and coveyance of all materials to site including labour for mixing ,laying,curing etc., complete.

Cement concrete 1:2:4 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for bed blocks for 10 cum

Supplying and erection centering for sides and soffits inculding necessary supports and structing for plain surfaces such as RCC Slab,Lintel,Beam coloum,sunshade etc complete.

Below basement

Above basement

R.C.C 1:11/2:3 using 20mm meta for all RCC works including curing and providing fixtures like fan clamps in the RCC roof wherever necessary and bearing curfaces of walls sides and bottom at slabs etc

Supplying and fabrication,placing in position of mild steel or ribbed Tor steel grills for RCC works including cost of steel and binding wire etc., complete.

Brick work with cement mortar 1:5 mix using country bricks of size 8 3/4"x4 1/4"x2 3/4" for foundation and basement and superstructure including cost and conveyance of all materials curing etc., complete.

Upto Basement

Above Basement

Filling work excavated earth including all labour charges for filling sand including all cost and conveyance of materials to site and all labour charges

Collection and supply of M-Sand and filling in to the basement including cost and conveyance to the siteand all labour charges for filling as per standard speecifications.

Weathering course with broken brick jeely for 20 mm size mixed with pure slacked lime (no sand to be used) in proposation of 32:12.5 cft to proper gradient,well beation with wooden beaters etc

Terrace flooring with one coarse of new machine pressed tiles of size 20x20x2 cm using CM 1:3 1 Cement ,3 M. Sand (conform to Table I IS 2116-1980) with water proofing compound 2% weight of cement used and the joints pointed with same mortar etc.,

Supply and fixing of mild steel doors including all labour charges as per standard specification.

Supply and fixing of mild steel windows including all labour charges as per standard specification.

Supply and fixing of cuddapah slab of approved quality 25mm including all labour chages etc complete

Plastering with cement mortar 1:3, 10mm thick for all exposed surfaces of concrete in all floors including curing etc, complete complying with standard specifaction and as directed.

Plastering with cement mortar 1:5, 12mm thick for all exposed surfaces of concrete in all floors including curing etc, complete complying with standard specifaction and as directed.

Painting two coats with Plastice emulsion in all floors using best quality and approved varity of color brush colour pigments including cost of all materials brushes and scaffolding charges etc, complete complying with standard specification and as directed.

Painting two coats using water proof Oil bound distemper in all the floors, including cost of lime and blue powder, fevical, type gums, brushes, scaffloding charges etc, complete complying with standard specification and as directed.

Black board painting two coats of approved quality including all labour charges etc complete.

Paving the floor with kotta stone of size 610x610x 20mm cm 1:3 20mm thick

Paving the flooring with special type of flooring tiles (Cement based Hydraulically pressed Anti skid tiles (20mm thick) in CM 1:3, 20mm thick

Fixing charges for doors & windows

windows

Painting two coats of synthetic enamel of two coats including all labour charges etc as per standard specification.

Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable colour for PVC concealed light point. (Assume 6 points per coil for the Rooms like Bath, Toilet & Pump room etc.) (SD-26)

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall for making good of the concealed portion with suitable colour for concealed PVC plug point SD 36

Supply and run of 2 of 1.50sqmm (22/0.3) PVc insulated SC unsheathed copper conductor of 1100V grade on 7/20 GI bearer wire for service connection mains SD NO: 64

Supply and fixing of WT bulk head fitting (Philips / Bajaj / K.Lite / Crornpton Greaves) suitable for incandescent lamp with guard and 100 W LED bulb SD 85.

Supply and fixing of 4 feet LED fittings 20W with LED (M-1275)

Supply and fixing of 16Amps DpIC switch of 500V with fuse and neutral on suitable TW box PWD earthign SD 142

Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp SD 110

Supply and fixing of 16 Amps DP switch of 500V with flush and neutral SD no 142

Supply and run of 2 of 4 sqmm (22/0.3) PVc insulated SC unsheathed copper conductor of 1100V grade 25mm dia GI pipe SD NO: 70

Supply and fixing rainwater down fall pipe of 110mm dia with necessary shoes, bends,& clamps etc.,

110mm PVC pipe

Supply and fixing 50mm GI Pipe B class

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete.

R. GEORGE THOMAS (BID ID -1191413)