Extension of Room with Ramp at Nagar lalbazar Primary Helth center109339670 at Lalbazar GP office premises , under lalbazar G.P 2025-26 head of A/C 15fc untied

Earth work in excavation of foundation trenches drains in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing spreading ----etc.-----etc.—as required complete. A)Depth of foundation not exceeding 1.50 m.

Earth work in filling in foundation trenchesor plinth with good earth in layers not exceeding 150mm including watering and ramming etc. layer by layer omplete.

Filling in foundation or plinth by fine sand in layers not exceeding 150 mm including watering and ramming etc. layer by layer complete.

Single layer brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand

Cement concrete with 30mm down graded stone shingle excluding shuttering in ground floor. (i) 6:3:1 Proportion

Ordinary Cement concrete (1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes:

125 mm thick brick work with 1st class bricks in cement mortar (4:1) in

Ordinary cement conc.(mix 1:1.5:3) with garded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any. River bazree

Reinforcement for reinforced concrete work in all sorts of structure including distribution bars, stirrups, binders etc. including supply of rods etc.----------etc. complete as per drawing and direction.

Hire and labour charges for shuttering with centering and necessary staging up to 4 m. using approved stout prop and thick hard wood planks of approved thickness with Up to P.L.Column

Hire and labour charges for shuttering with centering and necessary staging up to 4 m. using approved stout prop and thick hard wood planks of approved thickness with above P.L.Column

Plaster(wall, floor, ceiling etc) with sand and cement mortar including rounding off or chamfering corners as dir-ected and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary. With 4:1 cement morter 10 mm

20 mm plaster (1:6)

Neat cement punning about 1.5 mm th. In wall, dado, windowsill, floor drainetc.Cement0.152cu.m.per 100sq.m.

M.S. & W.I. Ornamental grill of approved design with MS flats or bars with joints continuously welded for windows railing etc. fitted and fixed in position with lugs and screwsand lugs in G.F. i) Grill weighting above 10 Kg /m2 and upto 16Kg./m2.

Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid T 2430/1510 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c ) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be laced perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I. wire from purlins / soffit. 4 mm thick High Pressure Steam Cured Non Asbestos pearl designer Fibre Cement Standard Ceiling Board (Density > 1500 Kg/m3) of size 595 mm X 595 mm, conforming IS 14862 & Type A Category IV of ISO 8336, tested as per AS-1530 part 3 & BS-476 Part 4,5,6,7 & 8, should be placed in the Grid module to form a False Ceiling. All complete as per the drawing & directions of Engineer-in-charge. In ground floor.

(A) Painting with best quality synthetic enamel paint of aproved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary.Wooden surface

(A) Painting with best quality synthetic enamel paint of aproved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary.Steel surface

Supplying & fitting Fixing 1st quality Ceramic tile in Wall & floor to match with the existing work & 4 nos key stone(a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative

Colour wash two coat with a coat of white wash …………..new surface tw coat other than yellow and pink

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification.

Supplying, fitting and fixing Shallow water closet Orissa pattern (I.P.W.C.) of approved make in white vitreous chinaware in position (excluding cost of concrete for fixing). (i) 580 mm long

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.

Supplying, fitting and fixing bib cock or stop cock.

Flat back urinal ( half stall urinal ) in white vitreous chinaware of approved make supplied, fitted and fixed complete in poition with brass screws on 75 mm x 75 mm x 75 mm wooden blocks complete.( i ) 465 mm X 355 mm X 265 mm

Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame ofany colour, frame size 550 mm X 400 mm

Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.450x300

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes 15 mm

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes 20 mm

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes 25 mm

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes 40 mm

Construction of septic tank capacity as per approved drawing & design ………of all cost of materials and labour. 30 user N.B. varity

Construction of circular sock well2.50m deep

M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing &direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete .The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete.

Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work) 0.45 MM

ADD GST 18%

ADD LWC 1%