Irrigation project STP Devigarh

DEPARTMENT OF SOIL AND WATER CONSERVATION, PUNJAB

Tender No.: DSWC/PAT/2026-27/04

Name of the Firm/ Bidder

Address of Firm/ Bidder

Mobile No of Firm/ Bidder Email ID of Firm/ Bidder

Name of work: PROVIDING AND LAYING OF HIGH-DENSITY POLYETHYLENE (HDPE) PIPELINE (DIAMETER 180 MM, 400 MM, PE-80, 4 Kg/cm2 WORKING PRESSURE AS PER 4984-1995 STANDARDS); INCLUDING ALL ALLIED WORKS WITH MATERIAL AS PER DNIT FROM SEWERAGE TREATMENT PLANT (2.5 MLD), DEVIGARH, DISTRICT PATIALA FOR SUPPLY OF TREATED WATER FOR IRRIGATION

Total Estimated Amount of Works Rs.

Quoted by Contractor {- or + to estimated amount, in figure upto 2 dcimal point only} Quote (-/+) 0

Note: Please quote only figure (upto 2 decimal points) in above blue colour box in minus or plus. Do not put %age sign after this figure. Please check Quoted Rate in Next cell.

Note: Please refer to DNIT (attached sheets) for item wise rate and details.

Name of Work :- PROVIDING AND LAYING OF HIGH-DENSITY POLYETHYLENE (HDPE) PIPELINE (DIAMETER 180 MM and 400 MM, PE-80, 4 Kg/cm2 WORKING PRESSURE AS PER 4984-1995 STANDARDS); INCLUDING ALL ALLIED WORKS WITH MATERIAL AS PER DNIT FROM SEWERAGE TREATMENT PLANT (2.5 MLD), DEVIGARH, DISTRICT PATIALA FOR SUPPLY OF TREATED WATER FOR IRRIGATION

Item of Work Total Amount (INR)

in Words in Figure

Providing, Laying, Jointing of HDPE 180 mm, and 400 mm dia, PE-80, 4 Kg/cm2 and Excavation of Trenches with back filling of Pipeline system etc. complete in all respects Fifty One Lakh Thirty Six Thousand seven hundred eight rupees only Eight Million Two Hundred Seven Thousand Eight Hundred Six Rupees Only

Civil Work of Pump Room (6mx4m) Five lakh Sixty five thousand nine hundred thirty eight only. One Million Eight Hundred Ninety Seven Thousand Six Hundred Four Rupees Only

Civil Works for Sump Well for Irrigation with treated water Nine Lakh Fifty Seven Thousand Nine Hundred Eighty two rupees only One Million Eight Hundred Ninety Seven Thousand Six Hundred Four Rupees Only

Providing and fixing of Pumping System complete Thirteen Lakh, Ninty three thousand six hundred sixty three only One Million Three Hundred Eighty Five Thousand Two Hundred Fifty Rupees Only

Electric Fittings for pump house and pumps Three lakh fourty nine thousand two hundred, five rupees only. Four Hundred Thirty Four Thousand Three Hundred Fifty Six Rupees Only

Electric power load increading, HT and LT line extension with required accessories etc. for irrigation system motor pump set operation complete. Two lakh fifty thousand only 250000

Digital Electromagnetic Water Flow Meter Sixty thousand only 60000

Autocut of System Lumpsum fifteen thousand only 15000

Sign Board Five thousand only 5000

Figure in words: Eighty Seven lakh thirty three thousand four hundred ninty six rupees only.

Only one of the options is to be filled. More than one option shall be rejected.

Rate filled in any form shall be considered only in %age

Rate shall be filled both in figures and in words, otherwise tender shall be rejected

Rate filled at any other place in the document shall not be considered.

No condition shall be accepted.

DEPARTMENT OF SOIL AND WATER CONSERVATION, PUNJAB

Project : UNDERGROUND PIPELINE PROJECT FOR UTILIZATION OF TREATED WATER FOR IRRIGATION AT S.T.P. (2.5 MLD), DEVIGARH, DISTT. PATIALA

ABSTRACT SHEET OF MATERIAL FOR PIPELINE SYSTEM

S.No. Description of items Unit Qty Rate Amount (INR)

1 Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation, watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.

a Earth work upto 1.5 m. Depth for All classes of soil except rocky Cum 3095.51 93.78

2 Providing, Laying, fixing & jointing of ISI Marked H.D.P.E. Pipes as per ISI - 4984- 1995 casting along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (Including riser pipe)

a H.D.P.E 180 mm o/d pipe of 4 kg./cm2 PE-80 Mtr 4266.5 936.05

0.0 Providing, Laying, fixing & jointing of ISI Marked H.D.P.E. Pipes as per ISI - 4984- 1995 casting along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.

a H.D.P.E 400 mm o/d pipe of 4 kg./cm2 PE-80 Mtr 100 4464.5

3 Supplying, fixing and jointing H.D.P.E pipe's specials complete as desired by Engineer-in- Charge.

a For pipe lines laid outside habitation & in the open area/ field 2% Extra will be taken for the respective i/d of pipe.) 2% of 28.15( F )(c) Mtr 4214 18.72

4 Supply & Installation of Alfa-Alfa valve (HDPE)

a For 180 mm. Dia. (Rate approved by DSWC) Each 35 1562

Cement Concrete 1:2:4( with stone ballast or shingle and mixing by manual means and Anti theft system cum 3.15 4801.84

5 Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing , cost of nut bolts & rubber insertion all carriages complete.

a C.I Single air valve (Size 50mm)(For 200 mm HDPE PIPE) Each 25 2515.51

6 Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B Class, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete.

a Supply & Jointing of 50 mm. Dia. G.I. Pipe(3mts for each ARV ) Mtr 75 721.9

7 Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge). Class PN-1 as per ISI

a 200mm i/d Sluice Valves flanged Each 7 15241.75

9 Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete. Note: If Non-return valves class PN-1.6 is used instead of class PN- 1.0 , than 5% will be paid extra.

Class PN-1.0 as per ISI with gun metal flap

a 200mm i/d Non-return valve Each 2 16950.12

DEPARTMENT OF SOIL AND WATER CONSERVATION, PUNJAB

Project : UNDERGROUND PIPELINE PROJECT FOR UTILIZATION OF TREATED WATER FOR IRRIGATION AT S.T.P. (2.5 MLD), DEVIGARH, DISTT. PATIALA

Abstract Sheet of Pump Room (6mx4m)

S.No. Description of items Unit Qty Rate (INR) Amount (INR)

1 Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. Cum 30.32 191.74

2 Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type Cum 4.53 3812.61

3 Earth filling under floors with surplus soil containing more than 40% taking outside the premises in 15 cm layers including ramming watering and consolidated lead upto 1000 m Cum 3.92 344.49

4 Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth. Cum 8.67 5697.32

5 Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. Cum 9.93 6487.45

0.9 Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded Sqm 3.46 348.71

6 Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete Qtl 19.58 7919.61

7 Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering). Sqm 34.43 221.24

8 Centering and shuttering for columns (Square or rectangular or poly gonal in plain) Sqm 43.51 502.52

9 Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels. Sqm 4.76 400.33

10 Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. Sqm 33.81 560.46

11 First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level. Cum 10.76 5426.57

12 Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing Sqm 33.81 743.77

13 12.5 mm thick cement plaster 1:5 Sqm 127.8 190.68

14 12.5 mm thick cement plaster 1:4 Sqm 33.81 199.11

15 Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish Sqm 161.61 84.28

16 Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface Sqm 161.61 22.12

17 Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm Sqm 161.61 126.42

18 Conglomerate floor 50mm thick cement concrete rete 1:2:4 on 100mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge and 100mm fine sand filling using mechanical mixer for mixing of material Sqm 19.61 789.07

19 Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge and 100mm sand filling using mechanical mixer for mixing of material Sqm 9.81 424.56

20 Floating coat of 1:5mm thick neat cement laid in one operation to the topping Sqm 19.61 30.55

21 Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge Mtr 7.6 244.41

22 Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge 0 0

a UPVC 110 mm bend Nos 4 142.22

23 Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16 Each 2 100.08

24 Khurra on roof as per item No. 13.43 with C.I. Spouts 100 mm dia fixed in position. Each 2 133.79

25 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge IS code : 15658(2006) Sqm 9.81 679.51

26 Providing and fixing M.S. angle iron 40x40x6mm chowkhat including iron hold fasts butt hinges fixed in position, finished with red lead non setting primer complete in all respect. (a)For single rebate. Kg 26.25 93.76

27 Providing and fixing 14 gauge MS sheet garage doors with 40mmx40mmx6mm angle iron frame with dia Sqm 2.52 4108.65

28 Providing & fixing of Box type steel windows, made of various ERW section outer 60mm x 25mm, central mullion 60mm x 25mm, for shutter 50mm x 20mm having thickness of 1.25mm (18 gauge), shash bar MS Tee 25mm x 3mm where required joints mitered and electrically flashwelded, with iron fittings including necessary iron handles, hinged cleat, tower bolts, iron hold fast and pintle hinges complete (excluding glazing and wire gauge) and finished with ready mixed paint red lead non setting primer complete as per specification, Drawings and to the entire satisfaction of engineer-in-charge. (Note:- Glazing, wire gauge and grill will be paid as per respective items) Kg 140 134.85

29 Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. (b) Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area Sqm 8.82 629.99

30 Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machine screws, complete in all respects. Sqm 1.6 954.47

31 Applying priming coat with metal primer on new steel or iron work including preparation of surface. Sqm 2.52 25.28

32 Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade Sqm 2.52 69.53

DEPARTMENT OF SOIL AND WATER CONSERVATION, PUNJAB

Project : UNDERGROUND PIPELINE PROJECT FOR UTILIZATION OF TREATED WATER FOR IRRIGATION AT S.T.P. (2.5 MLD), DEVIGARH, DISTT. PATIALA

Abstract Sheet of Sump Well (1.15 lac litre)

S.No. Description of items Unit Qty Rate (INR) Amount (INR)

1 Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m. Cum 291.94 35.82

0.0 Stone (building or pitching) Sand, Earth, Fly Ash, Bajri, Shingle, Spalls, Brick bats, Brick ballast and Stone metal. Cum 118.72 20.52

0.9 Extra for filling earth in 15 cm layers and compaction Cum 118.72 54.78

2 Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type Cum 9.54 4483.6

3 Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth. Cum 23.77 6600.17

4 Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. Cum 35.14 7391.35

5 Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete Qtl 34.6 7919.61

6 Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering). Sqm 10.93 221.24

7 Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering) including attached pilasters, buttresses etc when Sqm 200.79 468.81

8 Waterproofing of wet areas ( Concrete/ Masonary Surface ) and any water retaining structures such as swimming pools, water tanks, Bathrooms, toilets, balconies, planters etc with high performance polymer modified cementitionous coating ( DR. FIXIT FASTFLEX / Equivalent ) to provide tough film build-up and highly elastic film formation, which accommodates thermal movements so as to provide seamless coating without any joints to prevents water leakage. The scope of work also includes surface prepration and cleaning, washing and removing dust,dirt and loose particles from concrete / masonary surface complete in all respects. Sqm 134.08 531.5

9 Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, Qtl 3.3 10847.83

10 Applying priming coat with metal primer on new steel or iron work including preparation of surface. Sqm 16.49 25.28

11 Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade Sqm 16.49 69.53

DEPARTMENT OF SOIL AND WATER CONSERVATION, PUNJAB

Project : UNDERGROUND PIPELINE PROJECT FOR UTILIZATION OF TREATED WATER FOR IRRIGATION AT S.T.P. (2.5 MLD), DEVIGARH, DISTT. PATIALA

ABSTRACT SHEET FOR COST OF PUMPING SYSTEM INSTALLATION

S.No. Description of items Unit Qty Rate (INR) Amount (INR)

1 Providing, fitting & commesioning of ISI Mark Monoblock Non-clog pumpset with Panel Board, Fuse Box, Cable for connection from Pump to Panel within the pump Room for 3.33MLD discharge and 24.30 Meter Head and power of 20 HP(as calculated in head loss sheet) (Non- Schduled Item, cost considered as per market rate) (excluding the cost of Panel Board, Fuse Box, Cable )self propeller motor Set 2 373948

2 Control panel with MS steel sheet fabricated, dust & vermin proof wall mounted, rubber cord lining to prevent dust & moisture, dully painted with required holes for cables in coming and out going of suitable capacity with starter, Amp. meter, volt. meter for running of Motor pumpset Set 2 212400

1 P/F of 4 inch MS Blend Plain end mtr 10 1650

2 MS Flanges 100 mm. mtr 15 600

3 Supply of suction pipe 4" pipe MS B Class 12 1470

4 Making Cable Connection for KIT KAT Panel and Panel to motor including cost at cable, labour and thimbles. kg 2 4200

5 Supply of Nut Bolt kg 40 132

6 Installatition of Horizontal Pump Set kg 2 9600

7 Fixing of delivery and suction complete welding at site etc. kg 2 7200

8 Providing and fixing of Hand Hole. kg 2 3600

9 MS Platform with woodentop 20' long 2-1/2 wide with railing on one side 1 45600

10 Delivery pipe 4" C Class ISI Each 20 1650

11 KIT KAT Set 200 amp. With board. 1 3840

12 Fabrication and fixing Gantry Each 1 7200

Note Above rates are according to market rate, actual rate may vary.

DEPARTMENT OF SOIL AND WATER CONSERVATION, PUNJAB

Project : UNDERGROUND PIPELINE PROJECT FOR UTILIZATION OF TREATED WATER FOR IRRIGATION AT S.T.P. (2.5 MLD), DEVIGARH, DISTT. PATIALA

ABSTRACT SHEET FOR COST OF ELECTRICAL SYSTEM OF PUMP ROOM

S. No Description of Item Unit QTY. RATE (INR) Amount (INR)

1 RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-

Wiring fan point (Without fan box) Each 2 1091.69

Wiring fan point (With fan box) Each 2 1210.2

Wiring light point Each 6 762.47

Wiring 6Amp. wall socket point Each 2 618.93

Wiring 16/20Amp. power plug control poin Each 1 478.02

2 PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-

Overall size 2.5sq.mm (Un-sheathed) Meter 100 36.98

Overall size 4sq.mm (Un-sheathed) Meter 100 53.91

3 PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring urposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-

Heavy Gauge PVC Conduit Pipe 25mm dia.(Flushed) Meter 50 70.8

4 G.I. EARTHING: Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. to make a mesh around the GI Pipe) with G.I. reducing socket including erection of the same, 4.50 metre (14.76 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 8 metre in length (including boring & refilling).

Earthing with 8 S.W.G. (4mm dia.) G.I. wire in 15mm dia G.I. pipe with G.I. reducing socket 50mm x 15mm (upto 8Metre in length) Each 10 3315.89

5 XLPE INSULATED ARMOURED CABLES (LOOSE):-Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-

Overall size 95sq.mm (4Core) Armoured (Loose) Meter 200 538.6

Overall size 16sq.mm (4Core) Armoured (Loose) Meter 10 161.97

6 MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-

MCB Single Pole 6-32amp. (10kA, Curve-C) Each 6 190.57

MCB Single Pole 40amp. (10kA, Curve-C) Each 1 395.37

7 RCCB's:Supply and erection of RCCB (Residual Current Circuit Breaker) for Earth leakage protection suitable for 240/415 volts 50 cycles AC supply with breaking capacity of 10kA as per IEC 61008-1 in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs

RCCB Double Pole 16/25amp., Sensitivity 30mA Each 1 1948.13

8 SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's:

Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439- 1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-

SP&N Double Door Distribution Board 8 way each Each 1 1416.27

9 CABLE TRAY: Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:-

Cable Tray Size 150mm x 50mm x 50mm (2mm thick) Meter 10 1066.35

10 Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1/2mtr. below ground level including excavation placing the pipe in position and back filling ith excavated soil etc. of the required size:- Double Walled Corrugated HDPE Pipe 120/103.5mm (Outer/ Inner dia.) Meter 200 290.77

Design, supply, erection& commissioning of following distribution panels made of 2 mm thick CRCA steel sheets, Floor mounted, fully enclosed, compartmentalized, dust & vermin proof with hinged & lockable doors, & complete with earthing, painting as required and mounted with the following : ( for detail specs refer technical specifications).

SECTION -1 INCOMER

mccb FOUR POLE 100 AMP, 415 volts ≥ 15kA Fixed Magnetic and adjustable Thermal Setting

METTERING AND CONTROLS

ON/OFF Phase indicating lamps with control fuses

Ammeeter complete with CT and selector switches as required

Voltmeter complete with selector switches as required

SECTION -1 INCOMER

mccb FOUR POLE 100 AMP, 415 volts 15kA Fixed Magnetic and adjustable Thermal Setting Each 1 100000

METERING AND CONTROLS

ON/OFF phase indicating lamps with control fuses.

Ammeeter complete with CT and selector switches as required

Voltmeter complete with selector switches as required

SECTION -2 BUSBARS

100 TPN, AI Bus Bars with hear shrinkable PVC Sleeves-1 Set.

Neutral Faillure

Surge Protection

High Voltage Protection

SECTION -3 OUTGOINGS

16/25 A, four pole RCCB 30 ma Sentivity 4 N.e+2SPARE

32A, DP, 25 Ka MCB-2 NO. + 2 SPARE

12 Supply and installation of Hevay Duty Exhaust fan 450 mm with 1400 rpm. Approved MakeCrompton, Havells, Bajaj or equivalent. Each 3 2436

13 Supply and installation of Led Tube light 20-22 watt with make of Phillips, Bajaj and Wipro. Item to include all amterial and lobour complete as per Specification and entire satisfaction of Engineer In Charge. Each 5 431

Department of Soil and Water Conservation, Punjab

Project : UNDERGROUND PIPELINE PROJECT FOR UTILIZATION OF TREATED WATER FOR IRRIGATION AT S.T.P. (2.5 MLD), DEVIGARH, DISTT. PATIALA

Digital water flow meter

Sr. No. Description Unit Qty Rate (INR) Amount (INR)

1 Digital Electromagnetic Water Flow Meter Lumpsump 1 60000