CBF

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS-20 B (APSS 308) including cost and conveyance of all material and labour charges, etc., complete, for Ordinary Soil-Manual Means-Upto 3 m depth.

Plain Cement Concrete (1:5:10) prop nominal mix (cement: fine aggregate (50% Natural sand + 50% Rock sand): coarse aggregate) using 40mm size HBG (SSS) metal from approved quarry (obtained by blasting) including Cost and Conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402)

Painitng walls with Snowcem or other equal and approved water proof cement paint over priming coat, 2 coats (all colours) including cost and conveyance of all materials and labour charges etc,. Complte as per finished item of work

Supplying and Fixing Precasted RCC Rings Including fixing etc,Complete for Finished item of work

Supplying and Fixing Precasted RCC Cover Including fixing etc,Complete for Finished item of work

Supplying and fixing of 28/30 mm thick Wood Plastic Composite (WPC) Door shutter, comprising of 70% virgin polymer, 15% wood powder (fiber), and the remaining 15% additives, comprising of virgin PVC polymer of Kvalue 58-60 (Suspension grade), Calcium carbonate and natural fibers (wood powder) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum door density of 650 kg/cum, screw withdrawalstrength 1800N (Face) & 900N (Edge), Modulus of Elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixedin position with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws all as per direction of Engineer-in-Charge (SS butt hinges and SS screws shall be paid separately)

WATER SUPPLY AND SANITARY ARRANGEMENTS

Supplying & Fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 450 x 300 mm - Single C.P. Pillar cock including cost of all material and labour charges but excluding VAT.

Supplying and fixing approved make wash down European Water Closet of 1st quality conforming to IS:2556-Part-2- 2004 of white glazed with 'P' trap including cost & conveyance of all material to work site, all labour charges for all operations for fixing etc.. complete for finished item of work.

Supplying & Fixing of CP Long body bib cock fancy type deluxe heavy duty 12.7 mm dia Indian make Seiko/ Senior/ Nice or equivalent including cost and conveyance of all materials to site, all labour charges complete for finished item of work for All Floors but excluding VAT.

Constructing 904.0 mm (3′0′′) dia brick masonry inspection chamber as per IS- 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 230 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; 1⁄2" thick both inside and outside fitted with 20" dia RCC manhole covers and frames

Supply and Fixing of CPVC Pipes (28.60 mm OD Pipe - SDR 13.5 )and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) of Ashirvad / Ajay Flowguard.

Supply and Fixing of CPVC Pipes (22.20mm OD Pipe - SDR 13.5 Jand Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) of Ashirvad / Ajay Flowguard.

Providing & fixing UPVC SWR pipes TYPE-B (Single socket 4 Kg/sq.cm Prince/Sudhakar or any ISI Brand) conforming to IS 13592:1992 including necessary specials, jointing with adhesives fixing vertical pipes over wooden battens including cost and conveyance of all materials at site, all taxes etc., complete 110mm (75mm dia)

Providing & fixing UPVC SWR pipes TYPE-B (Single socket 4 Kg/sq.cm Prince/Sudhakar or any ISI Brand) conforming to IS 13592:1992 including necessary specials, jointing with adhesives fixing vertical pipes over wooden battens including cost and conveyance of all materials at site, all taxes etc., complete 110mm (110mm dia)