Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.9 LAccepted-AOC | L1 | Accepted-AOC Awarded | |
| 2 | L2₹33.8 L+₹7,709.70 (0.23%)Rejected-Finance | L2 | Rejected-Finance Not Being L1 | |
| 3 | L3₹36.3 L+₹2.5 L (7.39%)Rejected-Finance | L3 | Rejected-Finance Not Being L1 | |
| 4 | L4₹36.5 L+₹2.7 L (8.10%)Rejected-Finance | L4 | Rejected-Finance Not Being L1 | |
| 5 | L5₹38.0 L+₹4.2 L (12.4%)Rejected-Finance | L5 | Rejected-Finance Not Being L1 |
Tender Value
₹37 L
EMD Value
₹74,000
Closing Date
18 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer North Ahmednagar
Military Engineer Services Garrison Engineers (North) Nagar Pathardi Road Ahmednagar Fort Ahmednagar 414 002
SMART COMPREHENSIVE DAY TO DAY MAINT INCLUDING B/R, E/M and BS IN OFFRS MD ACCN AT MOTIBAGH ENCLAVE PENTON RD, ROBERT ROAD, HUNTER ROAD, POTTINGER ROAD, NAGARWALA RD, PEARSON RD, CESSEL RD, KITCHNER RD ELEPHANTA RD UNDER GE(N) AHMEDNAGAR.
2023_MES_623710_2
8802 / E8
Open Tender
Miscellaneous Works
Item Rate
270 days
Garrison Engineer North Ahmednagar
Class D Cat a(i)
8 documents required · 8 mandatory
₹500
Garrison Engineer(North) Ahmednagar
₹74,000
Yes
7 Feb 2024
25 Nov 2023
20 Dec 2023
25 Nov 2023
18 Dec 2023
4 Dec 2023
Amount
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
Demolition of plain cement concrete (unreinforced) in ground floor not exceeding 15 cm thick all as directed.
Material and labour for 75 mm thick plain cement concrete 1:4:8 type D2, using 40 mm graded stone aggregate as in sub base all as directed.
Renewing glazed tiles in patches, area n exc 5 sq. m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete
Material and labour for joint free / rectified non skid ceramic coloured tiles non skid of somany or equivalent makes as specified in PS, 8-10 mm thick as approved by GE (square / rectangular) size of ezch tile 400x400mm, as in floor etc laid over and including screed bed 15 mm thick in cement mortar 1:6 set and jointed with white or coloured cement to match complete all as specified and as directed. .
Material and labour for coloured glazed ceramic tiles digitally printed premium series of size 300x450 mm , 8-10 mm thick as approved by GE as in dado/skirting or on vertical surfaces, over and including 10 mm thick backing coat in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.
Material and labour for Vitrified ceramic tiles,10 mm thick (square / rectangular) of size 600 x 600 mm of any shade as approved by GE in floor etc laid over and including screed bed 15 mm thick in cement mortar 1:6 set and pointed in white or coloured cement to match complete all as specified.
All as per item No 08 above but on skirting and backing coat of 10 mm thick in CM 1:4
M & L for Chequred cement concrete tiles with pigment 25 cm x 25 cm x 25 mm thick, set, jointed and pointed in neat cement slurry as in floors over and including screed bed of 15 mm thickness in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge
M & L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed by Engineer-in-Charge
Material and labour 20mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills, jambs, lintel etc or on vertical surfaces including vertical projection, full round moulding the edge laid over screed bed 15mm thick in CM 1:4 jointing , pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite and rubbing polish to achieve mirror finish complete all as specified and directed.
Material and labour machine cut cudappah stone slab 20-25 mm thick over cement screed base, laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing all as directed.
Demolition of plain cement concrete solid block masonary built in cement mortar all as directed.
M&L forBrickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge
Taking down cement plaster on brick / stone walls including raking out joints, hacking for key, scrubbing down with water all as directed
Material and labour for rendering, 15 mm thick on stone/brick / concrete surfaces in cement mortar 1:6 surfaces finished even and smooth with sagol finish all as specified and directed.
Material and labour for rendering, 15 mm thick on stone concrete surfaces in cement mortar 1:4 surfaces finished even and smooth without using extra cement all as specified and directed.
Dismantling of single layer manglore pattern in roofing all as directed.
All as item no 18 above but bedded in cement morter
Dismantling boarding, any description fixed in any position with screws
Dismantling battens for tiles, shingles etc of any size including tilting fillets spacing exc 15 cm
M&L for roofing tile, manglore pattern interlocking at sides joints laid dry
All as item no 22 but except manlore pattern tiles
M&L Ridge or hip tiles to suit mangalore pattern of roofing tiles, bedded and jointed in cement morter 1:6
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including ridge all as directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall,fixed with self tapping screwsaas specified etc all as directed.
Supply and fix 0.50 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 all as directed.
Supply and fixing in repairs vitreous china wash down water closet (Pedestal pattern) white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges device complete connecting to 'P' or 'S' trap all as directed.
Supply and fix in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistren complete all as specified and directed.
Supply and fix in repairs wash hand basin vitreous China, flat back of size 550 X 400 mm including a pair of brackets, PTMT waste coupling, 32 mm dia PVC flexible waste pipe and connecting to stop valve and nahani trap all as directed.
Preparing new unplastered or plastered surfaces and applying two coats of oil bound distemper including chalk whitening on wall including smooth roller finish complete all as directed.
Preparing old unplastered or plastered surfaces and applying one coats of oil bound distempering on walls all as directed.
Preparing old painted surfaces of wall and applying two coats of cement based paint all as directed.
Preparing old painted surfaces of wall and applying one coats of cement based paint all as directed.
Taking down chowkats or frames exc 1.5 Sq m but nexc 4.00 sqm with shutters (without taking off shutters from the frames) all as directed.
Taking down chowkats or frames n exc 1.5 Sq m with shutters (without taking off shutters from the frames) all as directed.
Taking down shutters of any description exc 1 sqm and n exc 2 sqm each
Supply and fixing 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides
Supply and fix 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) all as directed.
Supply and fix solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, all as directed.
Supply and fixing Factory Made Solid PVC Moulded Door Shutter, with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face
Supply and fix galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples all as directed.
Supply and fix mild steel butt hinges medium weight cold rolled of size 100mm
Supply and fix aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy and fixed 300mm long.
Supply and fix aluminium anodised barrel tower bolt of extruded section 200mm long.
Supply and fix aluminium anodised handles of extruded section 150mm long.
Material and labour for two coats of synthetic enamel paint over a coat of pink primer for new wooden surfaces of any description exc 10 cm width or girth including preparation of surfaces and smooth finish with roller all as directed.
Material and labour for two coats of synthetic enamel paint over a coat of red oxide primer for new steel surfaces of any description exc 10 cm width or girth including preparation of surfaces all as directed.
Supply and fix mild Steel 20 mm dia decorative powder coated curtain rods with fixing brackets fixed in repairs
Supply and fixed in repairs 32 mm dia PVC waste pipe(outlet pipe) plain fixed to waste coupling of WHB or Sink etc all as directed.
Supply and fixe in repairs stainless steel kitchen sink matt finish with draining over all size 950 X 510 mm and bowl size 410 X 410 X 230 mm, made out of 1.00 mm thick SS sheet of high quality including a pait of brackets, waste coupling, plug and chain, 32 mm dia PVC flexible waste pipe and nahani trap complete all as specified and directed.
S&F stainless steel kitchen plate rack made out of 0.63 mm thick stainless steel sheet of size 36''x 36''x 10'' with complete accessories including screws etc complete all as specified and directed by Engineer-in-Charge .
S&F in repair wall mixture, with provn for overhead shower all as directed
Material and labour for special treatment to sunken slab floor incl WC trap etc including cleaning and preparing the surface area for carrying out membrane water proofing treatment, then injection grouting the weak areas on the concrete surface with cementitious grout and applying 10mm thick cement plaster in CM 1:4. Then providing and laying Mineral Top APP (Atactic Polypropylene Polymer) modified prefabricated 5 layer 4mm thick water proofing membrane, black finished rainforce with non woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 Litre per Sqm by the same membrane manufacturer of density at 25ºC, 0.87-0.89 Kg per litre and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torach and sealing all joints etc and preparing the surface complete. and providing PCC 1:5:10 type E2 using 40mm graded mechanically crushed stone aggregates in sunken slab and 75mm thick PCC 1:4:8 type D2 using 40mm graded mechanically crushed stone aggregates as base, 40mm bore GI pipe, light grade of length not less that 50 cm as spout, complete all as specified and as directed Make : Super Thermolay MT of STP / TEXSA / FosRoc Note : Work has to be carried out strictly by the authonticated applicator of the manufacturer and as per manufacturers specification as approved by GE.
M&L in repairs for false ceiling with vinyle faced Arn-GYP-FB, celing 600 x 600 x 9mm thick with washable metallized polyster foil backing with vinyle covered edges supporting sections shall be of sutable size from same makes embossed on section and level adjuster duly suspended by 2mm dia GI wire fixed to roof at 600mm center to center as per manufacturere,s instruction and all as directed Make : Armstrong or equivalent in Saint Gobin/Lafarge
Supply and fix in repair health faucet (hand shower) with 8 mm dia 1 m long flexible tube wall mounted / hooked all as per
Supply and fix in repair bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule all as directed.
Supply and fixing in repairs stop valve cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore
Supply and fix in repair 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe all as directed.
Supply and fix in repairs, shower rose with shower arm
Hacking out old broken glass (any thickness size,quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads n'exc 1.5 Sqm.
Material and labour for glazing with 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane all as directed.
Supply and fix in repair galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples all as directed.
Supply and fix in repairs rotational moulded polyethylene water storage tanks Tripal layer (cylindrical vertical with closed top) of 500 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to irin pipr and connecting complete all as specified and directed.
All as per item No 64 above but 1000 ltrs etc.
S&F in repairs PVC connections 15 mm size with Stainless steel Nuts of length 600mm
S&F for stainless steel grating without waste holes 100 mm dia
S&F for stainless steel grating with waste holes 100 mm dia
S&F for PVC (SWR) floor trap, plain with grating including jointing with solevent cement 75 mm bore
S&F for low density polyethelene pipes 32 mm bore (LDPE) of pressure rating 6 Kg/cm² laid in trenches/fixed to wall
Supply and fix repairs PVC valveless, syphonic action type, flushing cistern,low level, all accesories all as directed. Make :- Sleek essence series Of Hindware or Cat part No E8303 Of Parryware .
Taking up or down steel tubing and connections,15 mm bore
All as per item No 72 but 20mm bore
S&L of CPVC pipes SDR 11 including fittings in trenches, 16mm outer dia fixed to walls /ceiling or laid in trenches incl all necessary fittings.
All as per item No 74 but 20mm outer dia etc
Cutting chases, pinning in makding good to facing where required and pointing in cment morter 1:3 for consealed water tubing cutting not exc 10 cm girth
Supply and fix coloured anodised aluminium three track window made out of Jindal aluminium sections Nos 20671,20672,20690 & 20668 including 5 mm thick plaint sheet glass and stainless steel wire guaze as per PS, locking arrangement all as directed.
S&F coloured anodised aluminium ventilator as per PS and make approved by GE including all fittings locking arragement, glazing, guazing and fixed with suitable size of screws all as directed
M&L for framed work such as guard bars/ grill /gratings etc with ends of bars shouldered and/or riveted or gorged into spikes confroming to FE-290, Gde -E- 165
Fixing only for framed work such as guard bars/ grill /gratings etc with ends of bars shouldered and/or riveted or gorged into spikes confroming to FE-290, Gde -E- 165
Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and refixing in the same opening including easing and adjusting and also refixing builders hardware as required including renewal of unservieable screws etc
S&F for 19/20mm PVC shutter Colour PVC prelaminated board fixed to timber frame worka as in cup boards shutters/shelves/pelmets box and similar items etc complte all as specified and directed by Engineer-in-Charge
S&F for in repaire Auto closing hinges 35mm of o crank (KH-001) ir 8 crank (KH=002) openable at 110 degree for kitchen cabinet shutters fixed complete as specified and directed
Supply and fix tubular towel rail, brass chromium plated 20 mm dia `D' type, 60 cm long between flanges including a pair of brackets etc complete all as specified and directed by Engineer-in-Charge
Supply and fix repairs PVC (SWR) floor trap, 75 mm dia with grating including jointing with slovent cement etc all as directed.
Day to day complaints for the following works :- (a) Complaint related to carpenter works like door easing, door repair, kitchen cup board repair, window/door wire mesh/glass pane repair, refixing of building hardware etc by deploying carpentor and mazdoor.
(b) Complaint related to plumbing works like repair/refixing of Bib tap, Stop cock, Angle cock Connection pipes, waste pipes, Flush tank, Flush pipe,Shower, Pvc tank, ball valves, towel rail ,WHB,EWC, waste coupling, Grating,Pillar tap etc.by deploying plumber and mazdoor.
(c) Complaint related to cement works like repair to floors/ wall plaster in patches/ filling of holes, tiles repairs etc. by deploying mason and mazdoor.
(d) Removing blockage from water closet, floor or gully or Nahani trap and bends by rodding thoroughly and pouring water under pressure and cleaning, clearing the drainage to efficient and smooth flow of sludge/ waste water all as specified and dircted by Engineer in charge.
1. Contractor will establish a well furnished complaint cell to receive the complaints (Petty repair) in the area allocated by Enginner-in-Charge/GE. 2. Contractor will use the software/ App for receiving the complaints and after the complaint resolved, same will be reflected in Software/ App. Note: a. Cost of purchase of App/ software borne by the contractor only. b. For the security purpose, the access given to use the App/ software will be only from JE/Engineer-in-Charge. c. Photographs and description of the complaint will be filled into App from user side. d. After resolving the complaint, Photograph of the same will be filled by contractor side. 3. Contractor will deploy a Data Entry operator staff to receive the complaints made by users in complaint cell from time 9:00 AM to 17:00 PM on all working day. 4. Contractor will deploy sufficient plumber/ Carpainter /Mason/safaiwala/electrician to attend the daily complaints (petty repair) on daily basis. Attendance report of the deployed skilled staff alongwith their helper will be submitted to JE/Engineer-in-Charge on daily basis
5. Contractor's supervisor will report on all working days alongwith their skilled staff and printed contractor's firm name complaint slip book at 8:30 hrs at JE/Engineer-in-Charge received complaints from users and to submit completion report/constraints, if any on the same day by 1700 hrs. 6. Printed complaint slip book as per format approved by Engineer-in-charge shall be provided and maintained by the contractor. 7. If there is any major complaints of tilling/Plumbing/Joinery/ electrician/BS for which additional times/manpower or T&P as required the same shall be provided by the contractor without any extra cost to Govt. The same will be reported to JE/Engineer-in-Charge for taking consent. 8. If the complaints will not be attended a recovery @ Rs. 1000 per day shall be recovered from the amount due to the contractor. 9. Complaint slip and complaint register etc. shall be provided by the contractor without any extra cost to the department and cost there of shall be deemed to be included in quoted rates by the contractor against respective items.
Taking down carefully copper/aluminum point wiring (light/fan/bell/socket, power point etc) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfases of walls, floors etc complete all as specified and directed Engineer-in-Charge
M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sq mm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable drawn in and incl PVC Casing and capping ISI Marked with its accessories PVC boxes (upto 18 module suitble for Mylinc series of Legrand including white plates with frame upto 18 module of make suitable for Mylinc Series ) for fixing switches/socket/regulators etc incl 1.5 sq mm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable as earth continuity conductor to common earth & connecting to earth dolly for the following, all as specified and directed. Note : 1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2.Wiring shall be done as per complaints recd from user only on required basis it is not necessary to do whole wiring of any whole bldg 3. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, ceiling lights, bulkhead lights, bldg security light etc
One light point controlled by switch 5 Amp single pole one way
One fan point controlled by switch 5 Amp single pole one way
One bell point controlled by one switch 5 Amp single pole, one way on independent board
One 3 pin 5 Amp socket outlet on same board controlled by one, one way 5 Amp switch
One socket outlet 5/3 pin 5 Amp controlled by one switch on independent board
One light point controlled by switch 5 Amp single pole two way
All as per Item No 94 (here-in-before) but with 2.5 Sqmm Copper conductor cable for Phase , Neutral and Earth for one 3 pin, 15 Amp socket outlet on independent board
S&F Modular Switch, 6 Amp, one way, one Module as per existing. etc complete all as specified and directed by Engineer-in-Charge
S&F Modular Switch, 6 Amp, two way, one Module. etc complete all as specified and directed by Engineer-in-Charge
S&F Modular Switch, 16 Amp, onw way, one Module as per existing. etc complete all as specified and directed by Engineer-in-Charge
S&F Modular Socket Outlet 6 Amp, 2/3 pin, combined two module etc as per existing complete all as specified and directed by Engineer-in-Charge.
S&F Modular Socket Outlet 6 Amp / 16 Amp - 2/3 pin combined two module as per existing etc complete all as specified and directed by Engineer-in-Charge
S&F Modular Bell push, 6 Amp, one module etc complete all as specified and directed by Engineer-in-Charge
S&F Modular Fan Regulator Fan step regulator, 120 Watt - two module etc complete all as specified and directed by Engineer-in-Charge
Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting etc complete all as specified and directed by Engineer-in-Charge
M&L ceiling rose 3 terminal / PVC / polycarbonate, isolated body etc complete all as specified and directed by Engineer-in-Charge
S & F in replacement double door Sheet metal enclosures factory made DBs 4 way TPN, 415 volts ,protection class IP-42, suitable for fixing of MCBs, etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand ,or equivalent in Simens/ L&T
S & F in replacement double door Sheet metal enclosures factory made DBs SPN, 8 way ,240 volts ,protection class IP-42,Concealed in wall suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand / Simens/ L&T
S & F in replacement double door Sheet metal enclosures factory made DBs 4 way SPN, 240 volts ,Concealed in wall protection class IP-42, suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand / Simens/ L&T
Supply & fixing MCB , SP, AC, 240 Volts of 06 to 40 Amp capacity 16KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge Make: Legrand / Simens/ L&T
Supply & fixing MCBs, TPN, AC, 415 volts of 63 Amps capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge Make: Legrand / Simens/ L&T
Supply & fixing MCBs, SPN, AC, 240 volts of 40 Amps capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge Make: Legrand / Simens/ L&T
Supply and fix ultra slim square profile LED lighting fixture, environmental friendly, energy efficient ready to use pack LED Tube light fitiing 20 Watt with LED light source 6500 K with uniform light output, Lumen output>110 with all accessories including its connection with and including 2 core sheathed copper conductor cable of size 0.5 Sqmm with complete with all accessories etc complete all as specified and directed by Engineer-in-Charge
Supply & fix 10 Watt Linear LED batten Made from polymer extruded channel,with Square profile for glare free light complete all as specified and directed by Engineer-in-Charge
Supply & fix in replacement energy saving and environmental friendly long life LED street light 25 Watt (Bldg security light) made up of pressure die cast aluminium housing with mild power LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP65 protection and impact resistance of IK07 fixed on wall with GI pipe of suitable dia and all fixing accessories including connecting up with & including twin core twisted flexible copper conductor cable of suitable size of 230V , 50 HZ etc complete all as specified and directed by Engineer-in-Charge Make -Bajaj/Crompton/Phillips
Supply & fix replacemnt industrial type switch socket for Geysers with 20 Amp MCB etc complete all as specified and directed by Engineer-in-Charge
S&F sub main wiring with two single core PVC insulated,unsheathed, FRLSH stranded copper conductor cable 4 Sqmm with 4 Sqmm PVC insulated, unsheathed, FRLSH stranded copper conductor cable as earth wire drawn through and including PVC Casing and capping ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directed by Engineer-in-Charge Note : 1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. Two run of 4 Sqmm cable i.e for one run for phase, one run for neutral with one run of 4 Sqmm cable for earth and one run of PVC Casing & caping shall be measured as one unit.
Day to day complaints for the following works :- (a) Complaint related to E/M works like repair/refixing of Switches,Switches and socket ceiling light,DBs MCBs Ceiling fan,Exhaust fan etc.by deploying Electrician and helper.
Notes for Ser item Nos 93 to 122 :-The quoted rate of Contractor shall comprise the following :- Contractor shall provide sufficient skilled and unskilled manpower on requirnment basis as directed by engineer incharge for attending and completing the complaints as per the users satisfaction. However, the number of skilled and unskilled manpower shall be increased as directed by Engr in charge depending upon the requirement / number of complaints registered at the complaint center. In case of failure on providing suffiiciet manpower by the contractor, a penalty at the rate of Rs 1000 per skilled person per day and Rs 600 per unskilled person per day shall be levied on the contractor and recovery for the same shall be affected from contractor's dues not withstanding the fact if number of complaints of any nature is less or more. Attendance register shall be maintained by the JE for recording the absentee details and the same register will be signed by the contractor/ Supervisor daily, the AGE weekly and the GE on month end. A separate register based on atttendance register for recording recovery of contractor shall be maintained by the JE and the recovery if any will be forwarded to GE every month for necessary action at his end. Any descripancy or contest on the entries in the attendance register shall be written to GE within 48 hours of the entry in the attendance register, if not than the entries done will be binding and uncontested for. The department is not liable for the contractor signature in the register and it is the contractors prerogative to get it signed either himself or his supervisor.
(a) For each complaint, a separate complaint slip shall be prepared by JE/ his representative and handed over to related tradesman, etc. for attending the complaint and after satisfactorily completion of complaint, compaint slip shall be submitted to concerned executive on the date as per Para above, which shall be got signed from the occupant and shall be produced at the time of payment to be made to the contractor. Complaints pertaining to same location and same nature consisting of replacement of maximum two fixtures in one quarter/ office/ building etc.involving movement of particular tradesman shall be measured and paid as one complaint. Replacement of more than two fixtures but multiple of three fixtures or part thereof in one quarter/ office/ building, etc. shall be measured as additional complaint. (b) Complaint slip and complaint register etc. shall be provided by the contractor without any extra cost to the department and cost there of shall be deemed to be included in quoted rates by the contractor against respective items. (c) Necessary transportations, tools, plants, ladders, including Screw,nut washers, Insulation tape ,other similar minor accessories required to complete the jobs/complaints shall be provided by the contractor without any extra cost to the department and cost there of shall deemed to be included in quoted rates by the contractor against respective item of schedule 'A'.(Item no 36 to 48 supply only measured and paid seperately)
Supply only switch piano flush type single pole, one way 5/6 Amp etc complete all as specified and directed by Engineer-in-Charge
Supply only Switch socket combination two in one, 5 Amp flush type 230V AC etc complete all as specified and directed by Engineer-in-Charge
Supply only Switch socket combination 5 Amp / 16Amp, five in one, 5 / 15 Amp 230V AC etc complete all as specified and directed by Engineer-in-Charge
Supply only bell push piano flush, single pole, one way 5/6 Amp etc complete all as specified and directed by Engineer-in-Charge
Supply only bell ding dong elelctric 230V AC single pole etc complete all as specified and directed by Engineer-in-Charge
Supply only stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required etc complete all as specified and directed by Engineer-in-Charge.
Supply only electronic dimmers,as per existing wattage, 250V flush type on the exiting phenolic laminated sheet etc. as required etc complete all as specified and directed by Engineer-in-Charge
Supply only MCB , SP, AC, 240 volts of 06 to 40 Amps, 10 KA Capacity, 'C' series and making connections with suitable size of copper lugs complete all as specified & directed.
Supply only fan Condensor Complete all as specified and directed by Engineer in Charge.
Supply only lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting etc complete all as specified and directed by Engineer-in-Charge
Supply only ceiling rose 3 terminal / PVC / polycarbonate, isolated body etc complete all as specified and directed by Engineer-in-Charge
Supply only in replacement GI Pipe 25 mm dia B Class bend 0.5 mtr length as suitable for fixing security light on wall with nut ,bolt and clamp etc complete all as specified and directed by Engineer-in-Charge.
Supply and fix 200 mm PVC Exhaust fan with complete accessories nut,bolt ,clamp including alternation in existing window making good including deposit old fan to E/M Store yard all as specified by Engineer-in-Charge
Taking out old PVC/Wooden/metal switch board ,wire connection from the wall and fix new PVC Board including Cutting to suitable for fixing switch/Socket/fan regulater of following sizes .(Note.Damaged Switch/Socket/regulator will be measured and paid Sepereately) (a) 4x4 inches
(b) 4x6 inches
(c) 6x8 inches
(d) 8x10 inches
(e)10x12 inches
Preparing the old painted surfaces of following steel furniture by removing old paint & touching up with Red oxide primer where necessary & denting where necessary & preparing the surfaces & spray / mannualy painting with two coat of synthetic enamel paint as per existing colour of articles all as specified & directed. NOTE : Spray painting shall be carried out mechanically. 1. Almirah med steel W/S
2. Almirah large steel W/S
3. Book Case steel (Glass door)
4. Chair steel W/O arms
5. Chair CB Steel W/Arm
6. Teapoy varandah
7. Charpoy IP Steel Hardtop
8.Table 900 x 600 W/O drawer
9.Table 900 x 600 with drawer
10. Chair Varandah
11. Shoe Rack Steel
12. Bed Hard Steel
M&L One coat of french polish on wooden surface of any width or girth incl scrapping and cleaning all as per drg and as directed by Engineer-in-charge. Polishing to following wooden furniture items shall be carried out in occupied quarters. 1. Almirah large with shelves
2. Almirah medium 1/2H 1/2SH
3. Almirah medium with shelves
4. Bed with plywood top
5. Book shelf open large
6. Book case small
7. Book case various type
8. Chair Easy
9. Chair Dinning cushioned
10. Chair writing
11. Chair Dinning
12. Hat stand W/M
13. Peg Table
14. Table bed side w/o drawer
15. Teble centre (FD)
16.Table Dinning 6 persons
17. Table dressing ladies W/M
18. Table dressing gents W/M
19. Teapoy FD
20. Table writing
21. Chair tipup wooden
22. Table 3' x 2' W/O drawer
23. Table 3' x 2' with drawer
24. Table Dining 04 Person
25. Table Dining 08 Person
26. Sofa Set 05 Seater
27. Sofa Set 04 Seater
MATOSHREE CONSTRUCTION
Ms. M.D. Auty
M/s. Chhtrapati Construction(Propa. Lokesh Anant Salunke)
M/s AG PATHAN
M/s. Shahabad Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .