Day to Day repair and maintenance work of Sanitary and Plumbing works for different buildings within the main campus of Burdwan Hospital, in the district of Purba Bardhaman.

Cleaning silt of inspection pit.

Labour for dismantling G.I. pipe with fittings. A (i) 15 mm

B (ii) 20 mm

C (iii) 25 mm

D (iv) 40 mm

Refixing G.I. pipe with fittings after cleaning where necessary. A (i) 15 mm

B (ii) 20 mm

C (iii) 25 mm

D (iv) 40 mm

Removing chokage in G.I. pipe including cleaning pipe. A (i) 15 mm

B (ii) 20 mm

C (ii) 20 mm

D (iv) 40 mm

Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.(a) With 'P' trap

Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing). i) 580X440mm

Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete.(ii) Plastic (hallow type) White EWC

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.

Supplying, fitting and fixing low-down cistern parts. Internal fittings for cistern complete of approved make.

Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete.Polythene Flush Pipe

Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets.550 mm X 400 mm size

Supplying, fitting and fixingstainless steelsink completewith wastefittings and two coats of painting of C.I. brackets. (a) Sink only i) 530 mm X 430 mm x 180 mm

Supplying, fitting and fixing Waste fittings complete.C.P. over brass, 32 mm

Supplying, fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.(ii) 450 mm long

Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.900 mm long

Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges.(i) 450 mm X 300 mm

Supplying, fitting and fixing shower of approved brand and make (f) Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar)

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials (a) For Exposed Work (ii) CPVC Pipes Class-2,SDR-13.5 A 15 mm

Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. A UPVC Pipes: (ii) 110 mm. Dia.

B UPVC Pipes: (i) 75 mm. Dia.

C UPVC Fittings: c) Bend 87.5 degree (ii) 110 mm. Dia.

D UPVC Fittings: c) Bend 87.5 degree (iii) 75 mm. Dia.

E UPVC Fittings: a) Plain Tee (ii) 110 mm. Dia.

F UPVC Fittings: a) Plain Tee (iii) 160 mm. Dia.

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (i) Single Socketed 3 Maeter Length (b) 110 mm

(B) Fittings (iii) Door Tee (b) 110 mm

v) Plain Y (b) 110 mm

x) Bend 87.5º (b) 110 mm

xi) Door Bend (T.S.) (b) 110 mm

xvi) Pipe Clip (b) 110 mm

Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer- in-charge. (Payment will be made on centre line measurement of the total pipeline including specials (A) Above ground (ii) 110 mm

(iii) 160 mm

Making one set of scaffolding only for replacing glass panels, painting, uprooting plant and another repairing works of building and S&P works for external works only with 10 cm. dia bamboo as main posts at the rate of 1 metre centre to centre and 7.5 cm. dia bamboo ties @ 0.75 metre apart fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-in-charge. A 7.50 metre height

B Shift

C 11.10 metre height

D Shift

E 14.7 metre height

F Shift

Supplying, fitting and fixing bib cock or stop cock. A (g) (i) Supplying, fitting and fixing alloy iron with brass spindle bib cock/ stop cock of approved brand and make, spray painted and tested to 21 kg per sq. cm. 15 mm

B (b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar

C (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand).

d (e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm

Supplying, fitting and fixing pillar cock of approved make. b) PTMT Pillar Cock - 15 mm. (Prayag or equivalent).

f) (i) CP Pillar Cock with 200 mm extended Lever Handle (Equivalent to Code No. 5031 & Model - FLORENTINE of JAQUAR or similar brand).

a) (i) CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model - Tropical / Sumthing Special of ESSCO or similar brand)

Please Enable Macros to View BoQ information