REPAIRS TO FLOORING, CUPBOARD IN VERANDHA AND CLASS ROOM AT KV SCHOOL, FENCING, SECURITY WALL INCLUDING JOINERY, FLOOR, ROOF AND CERTAIN WORKS IN E/M INSTALLATIONS AT SUNJUWAN UNDER GE JAMMU

Amount

Re-securing or easying and adjusting without taking down and tightening hinges in position including adjustment of existing iron mongery for shutter exceeding 1.0 Sqm but not exceeding 2.0 Sqm each (iron mongery) if used shall be paid under relevant items) and refixing in the same opening complete all as specified and as directed.

Taking down chowkats or frames (without taking off shutters from the frame) exceeding 1.50 Sqm but not exceeding 4.0 Sqm each and removing from site complete all as specified and directed.

Description same as per ser item No 2.00 here-in-before but not exceeding 1.5 Sqm each complete all as specified and directed.

Taking down shutters from the frame of any description exceeding 1.0 sqm but not exceeding 2.0 sqm each leaf and removing from site complete all as specified and as directed.

S&F pressed steel frames of size 105 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate and one shop coat of primer etc complete and fixed all as specified and as directed.

Description same as per Ser item No 6.00 here-in-before but of size 125 x 60 mm complete all as specified and as directed.

M&L cement concrete (1:3:6) type C-0 (using 12.5 mm graded crushed stone aggregate) filling in pressed steel chowkhats, bed block for holdfast and the like complete all as specified and directed.

S&F 35mm thick 2nd class hard wood panelled shutter plain, framed with panels of timber flat on both sides supplied and fitted to chowkats complete all as specified and directed.

S&F 35 mm thick IInd class hard wood glazed and skelton shutters sizes of members as specified in SSR(Part-I) clause 8.20(a), open rebated and prepared to receive glass or gauge (without sash bars ) edges of framing plain, chamfered or rounded, fitted with cut and miterd beads for securing glass or gauge etc complete all as specified and directed.

S&F 30 mm thick PVC wood grain printed factory made panelled door shutter (style) consisting of frame made out of MS tubes for top and bottom rail, MS frame shall be covered with heat moulded wood grain printed PVC channel and 5 mm thick X 15 mm wide PVC Sheet beading used inside style and rails and decorative PVC beading of 10 x 10 mm used instead of exposed portion of PVC sheeet beading as in toilet / kitchen cabinet shutters complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube, in opening as per specification and drawing complete all as specified and as directed.

S&F box type steel windows / Ventilator (factory made) outer frame made out of ERW tube 'P' section 65 X 45 X 25 mm and shutter of ERW tube 'P' section 50mm X 35mm X 20mm openable (double shutter) with glazed shutter on external side and gauzed shutter on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 no's on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes suitable for fixing cooler / AC window complete all as specified and directed as shown in drgs No CEPZTD-324/07 Sh 1/3 to 3/3. Note: - The quoted rates shall also include: - (i) One shop coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks / concrete surface. (ii) 4 no's of MS steel lugs made of 20 X 5 mm iron flat 200 mm long. (iii)10 mm Sq Bar grill / guard bar design as per drawing. (iv) PCC block for embedding lugs.

S & F Galvanized mild steel wire clothes power woven 0.46mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

Hacking out old broken glass panes (any thickness, size, quality or description) from wooden / steel frames, glazed with putty or fixed with beads complete all as specified and as directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty / beads in squares not exceeding 0.50 Sqm each pane complete all as specified and as directed.

Description same as per Ser item No 15.00 here-in-before but figured glass, pin head type complete all as specified and as directed.

S&F 300 mm long aluminium anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding door bolt of extruded section ISI marked complete all as specified and directed.

S&F aluminium anodised barrel tower bolts 150 mm size and fixed ISI marked complete all as specified and directed.

S&F 150 mm aluminium handle cast type ISI marked complete all as specified and directed.

S&F in repairs, mild steel enamelled helical door spring 200 / 150 mm (ISI Marked) size including roller and roller plate, fixed to wooden / steel frames by any means as required and directed by Engr-in-Charge. Make: - Everest, Godrej, Universal.

S&F in repair floor door stopper of aluminium alloy body and tongue 140 mm anodised with hard drawn steel spring fixed in floor complete all as specified and as directed.

S&F 100mm butt hinges medium weight cold rolled and fixed mild steel hinges complete all as specified and as directed.

M&L for preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

M&L for preparing pre-primed steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

S&F Mild steel framed works such as grills, framed guard bars and cooler stand similar work confirming to Fe 410-0 or Fe 310-0 including taking down scrap complete all as specified and as directed.

S & F Pre-painted galvalume aluminium zinc coated GI based corrugated steel sheeting 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering fixed with self tapping screws including ridges including taking down complete all as specified and directed.

Dismantling wall and ceiling boards (fibre pulp / insulation) any thickness including cover fillets including taking down all electric fittings fixed with ceiling and refixing the same in position after replacing the ceiling complete all as specified and as directed.

Providing & Fixing in position suspended false celling system using 'E' Grid suspended celling Grid system. The size of Grid shall be 600 X 600mm with GI frame work, main runner 39 X 24mm, cross tee 29 X 24mm and wall angle 22.2 X 22.2mm using 4mm thick High Pressure Stream cured non primered classic/designer variant E-Board ISI Marked IS No 14862-2000. Fibre cement 'E' Board to be placed in the grid of 'E' Grid suspended ceiling grid system duly suspended by 4mm dia GI bar hangers from the pulins of the roof with butter fly clips complete all as specified and as directed.

Taking down cement plaster of any thickness including surface finishes like tile etc racking out joints, hacking for key scrubbing down with water in cludding removal of rubbish of the premises of any height up to 12 Mtr and removing unserviceable material outside cantt area complete all as specified and as directed. Note: - Any damage to electric wiring/fittings should be make good with out any cost to govt.

M&L for rendering 15 mm thick on fair faces mixing with water proofing compound as per manufacturer's instruction of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement of any height up to 12 Mtr complete all as specified and as directed. Note: - Water proofing compound shall be measured and paid separately.

Supply only integral water proofing compound complete all as specified and as directed.

M & L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and as directed including taking down old plaster.

Preparation of newly plastered surface of any description and applying two coats of cement based paint over a coat of primer complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

Preparing new plastered surfaces and applying two coat of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L for rendering 5 mm thick on ceiling surfaces in CM 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

Preparation of new surfaces of ceiling and applying three coats of white washing to ceiling complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

M&L for any coloured (Except white / cream) non skid jointless ceramic tiles 6 to7 mm thick, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement over and pattern, laying etc of tiles and shade, colour shall be decided by GE complete all as specified and as directed.

Description same as per Ser item No 40.00 here-in-before but in vertical surfaces with 10 mm thick rendering in CM 1:4 complete all as specified and as directed.

M&L for non skid coloured tiles (Except white / cream) exceeding 0.06 Sqm and not exceeding 0.11 Sqm, 6-7mm thick of any colour pattern and 1st quality as approved by GE in floor set and jointed in grey cement slurry and pointed in white cement to match the colour of tile complete all as specified and as directed.

M&L Glazed ceramic coloured designer seamless tiles 300x450x7 to 8 mm thick on vertical surface as in skirting, dado set and jointed with neat cement slurry and pointed in coloured cement to match with the surface over and including 10mm thick rendering in CM 1:4 complete all as specifed and directed .

M&L for 75mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in floor / plinth protection laid in suitable panels finished even and fair all as specified. 6mm joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 gde and three part of sand (all by weight) complete all as specified and as directed.

Taking up or down GI tubing 15mm bore including cleaning complete all as specified and as directed.

Description same as per Ser item No 45.00 here-in-before but 20mm bore complete all as specified and as directed.

S&F 15 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm² fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and as directed. Make: - Finolex, Jain Irrigation System, Reliance.

S&F 20 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm² fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and as directed. Make: - Finolex, Jain Irrigation System, Reliance.

S&F in repair 15mm bore bib tap long body cast copper alloy CP fancy type with capstan head handle, screwed down, screwed for brass ferrule and fixed complete all as specified and as directed. Make: - Jaquar, Parko, Marc, GEM.

S&F in repairs 15mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed. Make: - Prayag, Shakti, Supreme.

S&F in repairs 15mm bore angle cock, cast copper alloy CP, fancy type high pressure with capstan head handle, screwed both ends for iron pipe or for unions all as specified and as directed. Make: - Jaquar, Parko, Marc, GEM.

Supply and fixing in repairs 15mm bore Pillar tap fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long shanks and fly-nuts, screwed for iron pipe, complete all as specified and as directed. Make: - Jaquar, Parko, Marc, GEM.

Dismantling water tanks of any capacity complete all as specified and as directed.

S&F 500 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position complete all as specified and as directed by Engineer-in-Charge.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe fixed in repairs complete all as specified and as directed. Make : Jaquar, Cera, Parryware.

Supply and fixing in repairs vitreous chinaware water closet (Squat pattern) long pan of size 580mm x 440mm Orissa pattern with integral white with ‘P’ or ‘S’ trap front or back inlet and a pair of foot rest complete including provision of cement concrete bedding complete fixed in repair and complete all specified and directed by Engineer-in-Charge. Make : Jaquar, Cera, Parryware.

Supply and fixing in repairs PVC valve less syphon action type low level flushing cistern 8 to 10 litres capacity with inlet, ball valve, float valve, push button type handle including telescopic flush pipe 32mm dia of stainless steel with long bend of 32mm dia complete all as specified and as directed.

Supply and fixing in repairs 15mm dia PVC connection with brass check nut of length 450mm complete all as specified and as directed.

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including spreader complete all as specified and as directed. Make: - Jaquar, Cera, Parryware.

Supply and fixing in repair Vitreous chinaware wash hand basin white, flat back of size 550x400 mm excluding tap but including brackets fixing to wall and two No's 10mm dia 100mm long nut and bolt over brackets and CP waste coupling complete all as specified and as directed. Make: - Jaquar, Cera, Parryware and hindware.

S&F in repair 100 mm dia stainless steel grating with waste hole complete all as specified and as directed.

S&F in repair 100 mm dia stainless steel grating complete all as specified and as directed.

Dismantling of steel work of any type complete all as specified and as directed.

S&F Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins,post, struts, gate and staples in fencing including cutting top to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary bolting or riveting, welding etc and similar work etc confirming to Fe 410W- Gde E - 250 quality 'A' or confirming to Fe 290 Gde E - 165 complete all as specified and as directed.

M&L for cleaning of water storage tank of capacity 500 litre completely by removing all scale dirt / dust of any description with chlorine complete all as specified and as directed at site including taking down and refixing of tank at the same place any damage will be rectified by the contractor at his own risk and cost.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, bends, Tees complete fixed to walls at any height complete all as specified and as directed. Make: - Supreme, Ashirwad, Finolex.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, bends, Tees complete fixed to walls at any height complete all as specified and as directed. Make: - Supreme, Ashirwad, Finolex.

Removing old tar felt, all loose dirt, cleaning the concrete / tiled surface with wire brush and applying neat cement slurry @ 1.5Kg/Sqm complete all as specified and directed by Engineer-in-Charge.

M & L 20mm thick cement plaster in CM 1:4 over concrete surface finished even and smooth without using extra cement mixed with water proofing compound pidi proof LW @ 200ml per 50Kg cement as per manufacturer's instructions complete all as specified and as directed by Engineer-in-Charge.

S & F Water proofing treatment provided with polymeric water proofing membrane 90 micron weighing not less than 3 Kg/Sqm on prepared surfaces vertical / horizontal laid over a coat of bitumen 85/25 @ 1.20Kg/Sqm, over a coat of bitumen primer 0.50Kg/Sqm one coat of bitumen 85/25 @ 1.20Kg/Sqm shall be provided over water proofing membrane as per manufacturer's instructions complete all as specified and directed by Engineer-in-Charge.

M&L applying two coats of aluminium paints on roof treatment complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as roof kerbs rounded or chamfered on edges complete all as specified and as directed.

M&L for preparation of old surfaces and applying one coat of white wash on walls complete all as specified and as directed.

M& L for preparation of old surfaces and applying two coat of cement base paint complete all as specified and directed. Make : Duracem(Berger paints), Gattucem( Asian paints), Snowcem plus

M&L for preparation of old surfaces and applying two coats of white wash on ceiling complete all as specified and as directed.

M&L for preparation of old surfaces and applying one coat of synthetic enamel paint over wood surface of any description over 10 cm width or girth complete all as specified and as directed. Make: Asian paints (apcolite),Berger (Luxol high gloss), Shalimar (Superlac).

M&L for preparation of old surfaces and applying one coat of synthetic enamel paint over steel surface over 10cm width or girth not otherwise described over complete all as specified and as directed. Make: Asian paints (apcolite),Berger (Luxol high gloss), Shalimar (Superlac).

M&L for complete removing of existing treatment on old surfaces of wall incl cornices (plastered or unplastered) complete all as specified and directed.

M&L for applying wall putty of standard make : Like Birla White or JK White as per manufacturs instructions to give smooth flawless surfaces complete all as specified incl filling crack and holes complete all as specified and directed. Make : JK white,Birla, Berger paints

M& L for applying two coats of Oil Bound distemper any color on over wall putty / prepared surface of item No 7 of walls over one coat of primer complete all as specified and directed. Make: - Asian paints, Shalimar paints, Berger

M&L Machine cut kota stone slab flooring 20-25mm thick (size of stone not less than 55cm x 55cm ) with 100 mm wide white marble border alround over & including 15mm thick screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing , grinding and polishing to yield mirror finish with machine complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc. 15cm thickness (below or above ground level) and removing from site complete all as specified and directed.

M & L Chequered cement concrete tiles 20cm x 20cmx25mm thick,set jointed and pointed in neat cement slurry in floors using white cement and pigments over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M & L for 75 mm thick plain cement concrete type D-2 1:4:8 , (using 40mm graded stone aggregate) as in sub base of path complete all as specified and directed.

S & F Precast kerb stones(factory made) in PCC 1:2:4 type B-1 using 20mm crushed stone aggregates incl chamfers, weatherings,throatings etc in smooth finish & set in cement mortar 1:4 on sides of roads including necessary excavation embedding blocks in the ground to depth complete all as specified and directed.

M&L machine pressed precast cement concrete interlocking paver block any shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 Grade with grey cement and no pigment laid over and including 25 mm thick sand cushion complete all as specified and directed.

M & L for walling of random rubble masonary uncoursed, well bonded, bedded and solidely hearted built in cement mortar 1:4 in wall complete all as specified and directed by Engineer in Charge.

Description all as per serial item No 88 here in before but except stone complete all as specified and directed.

M & L for Flush pointing to random rubble masonry uncoursed or brought upto coursed in CM 1:4 complete all as specified and directed

Dismantling RCC posts or struts of any description and section embedded in natural ground including taking out embedded portion and making good the disturbed ground surfaces complete all as specified and as directed by Engineer-in-Charge.

Excavation in post holes (or similar holes) each n.exc 0.50 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed

S&F in repair barbed wire, galvanized steel, 2 strand 2.24 mm dia with 2mm dia barbs at 75mm spacing straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc complete all as specified and directed(each line wire to be measure) .

Description all as per serial item No 93.00 here-in-before but fixing only complete all as specified and directed

Taking down steel gates of any description n.exc 3.5m length and 3mtr in height and in any position complete all as specified and directed

Demolition Brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed

M&L Brickwork with sub class "B" bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed

Description all as per serial item No 97.00 above but except bricks complete all as specified and directed.

M & L 15 mm thick rendering in two coats on brick work or concrete surface in cement mortar 1:4, surface finished even and fair without using extra cement complete all as specified and directed.

S & F precast cement concrete louvres and jallies, 40mm thick (measured solid), including all moulding and set in 1:4 cement mortar complete all as specified and directed.

Supply only MS chain link fencing 3 to 4 mm dia of size 75 x 75 mm complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size anf type to any type of standards, rail, straining bolts etc including provision of binding wire complete all as specified and directed.

Roughening Surfaces of old concrete floor by picking , sweeping, clean and washing down with water to remove dust etc complete all as specified and directed.

Description all as per serial item No 82.00 above but as in skirting or vertical surfaces including 10mm thick rendering in CM 1:3 complete all as specified and directed.

M&L for vitrified ceramics tiles 10mm thick polished, area of each tiles n.exc 0.36 sqm in floor and skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and directed.

Taking down door shutters exc 1.00 Sqm but not exc 2.00 Sqm and refixing in the same opening after easing adjusting complete all as specified and directed.

Taking down chowkats or frames with shutters (w/o taking off shutters from the frames ) not exc 4 sqm each, including cutting holes for taking out holdfasts or dismantling brick work(holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish(without any extra cost to Govt), & removing from site complete all as specified and directed by Engr-in-charge

S & F Pressed steel cup board frame (factory made) of MS sheet 1.25mm thick size of frame 60 x 40 mm with rebate of 20 mm wide and 12 mm deep including lugs, ms hinges 75mm, hold fast etc and one shop coat of red oxide primer with & including PCC 1:3:6 type C-0 as in back fill to chowkats, complete all as specified and directed .

S&F in repairs 18/19 mm thick Prelaminated Particle board,interior grade,prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws/nails to timber/steel frame work as in shelves,cup board shutters, book case, writing table stand, shelves etc including fixing of plain fillets square or rectangular of 2nd class hard wood not exc 3 sq.cm in leaping to shutters/shelves complete all as specified and directed .

Description all as per serial item no 109 above but for 18-20mm PVC/WPC color as per approved by Eng- in- Charge/ GE .

S&F Hasp & staple size 150mm aluminium anodised , safety type ,brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed .

Complete removal of existing treatment of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying two coats of oil bound distemper on walls after applying a layer of wall putty to make surface even and smooth complete all as specified and directed.

Taking down aluminum door/windows shutters and carrying out minor repairs/adjacent including , aluminum beads ,cleats of required size and refixing in same position complete all as specified and as directed .

S&F in repairs door closer hydraulically regulated designation No 3 universal type suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kg etc all as specified and directed at site

Hacking out old broken glass pane of any size quality or description from aluminium frame of window or door and providing 5.5mm thick tinted sheet glass and glazing with new aluminium beading rubber gasket as required at site complete all as specified and directed

S&F repair double action floor spring hydraulically regulated made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed, including taking down and refixing door in same opening all as specified and directed by Engr-in-charge..

GENESIS INDIA

M/S Sukhmani Construction Co.

ASHFAQ AHMED MANHAS

M/S Shesh Paul Gupta

M/S BALWAN SINGH

M/S ARUN ANAND

N S MANHAS

M/S TRIKUTA BUILDERS

Bidder Name

M/S Shesh Paul Gupta

M/S TRIKUTA BUILDERS

M/S ARUN ANAND

N S MANHAS

M/S Sukhmani Construction Co.

ASHFAQ AHMED MANHAS

M/S PRITHIVI RAJ AND SONS

GENESIS INDIA

M/S BALWAN SINGH