Tender ID

Karnataka

Retender

Works

Buildings

CONSTRUCTION OF LADIES REST ROOM AT MAVINAKURVE HARBOUR IN BHATKAL TALUK OF U.K.DISTRICT

Infrastructure Development Ports And Inland Water Transport Department

Executive engineer Karwar | Karnataka

Amount: Refer DocsCloses: 21 Jun 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published12 Jun 2024
Closed21 Jun 2024
Retendered12 Jun 2024

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 12 Jun 2024

Tender Value

Refer Docs

EMD Value

₹1.2 L

Closing Date

21 Jun 2024, 10:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Infrastructure Development Ports And Inland Water Transport Department

Contact Person

Thippeswamy M R

Office Number

Mobile Number

Work Description

PROVIDES REST ROOM FOR FISHER WOMEN AT MAVINAKURVE FISHERY HARBOUR IN BHATKAL TALUK OF UTTARA KANNADA DISTRICT

Tender Information

Tender ID

IDD/2023-24/BD/WORK_INDENT51/CALL-2

Reference Number

IDD/2023-24/BD/WORK_INDENT51/CALL-2

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

Executive engineer Karwar

Source Website

Subscribe to view

Documents Required

8 documents required · 8 mandatory

Technical Bid

RequiredAnnual Turnover Certificate

RequiredCompany Registration Certificate

RequiredWork Done Certificate Certificate issued by the Competent Authority not below the rank of Executive Engineer

RequiredWorks on hand which are to be completed in the next 12 months

RequiredLOC/Banker Certificate as per uploaded format

Requireditemwise workdone certificate qty required as per mentioned in the bid document

RequiredGST REGISTRATION CERTIFICATE

RequiredONGOING WORK LIST

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of kppp portal on or before the last date and time of bid submission

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of kppp portal due to internet connectivity issues and technical glitches at bidders end

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Registration with Employees Provident Fund Organisation under EPF and Miscellaneous Provision Act 1952 (Should attach latest copy)

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

Conditional tenders are not accepted.

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs. The Cost of the tender form shall not be refundable.

The employer reserves the rights to reject one or all tenders without assigning any reason.

The employer is not responsible for any delay in accessing KPPP portal.

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders.

To qualify for award of this contract, each tenderer should give all details and documents as per bid attached to this tender

Materials like bitumen, steel, cement etc., required for the work shall be procured by the tenderer themselves and should get tested by the quality control authority before used on the work

As per Karnataka state Government order LD/300/LET/2006 Blore dated 01.01.07 and Government letter no PW/134/BMS/2007 dated 27.07.07, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise it will be rejected

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval

Original documents/ Certificates enclosed must be produced in the office of Executive Engineer at the time of opening of bid.

All the items in the tender are inclusive of cost of all materials, all leads lifts, loading, unloading, transportation, labour, hire chares of machinery , curing for concrete works

Contractors should follow strictly prevailing rules of labour act

In case if the death of a contractor, after executing the agreement / commencement of the work, his legal heir, is an eligible registered contractor and is willing, can execute and complete the work, at the accepted tender rates, irrespective of the cost of the work

Department will not supply any materials

The tenderer should submit proposed methodology and programme of construction backed with equipment and material planning, & deployment duly supported with broad calculation and quality management , plan, proposed to be adopted justifying their capability of execution and completion of the work as per technical specifications and within the stipulated period of completion

The contractor should maintain the work for the period of 2 years (Two years) after the completion of the work at his own cost

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Bid document KW 3

GST paid separately as per Government order No FWD/65/RDF/2017 Dated:11-10-2018

Period of contract for which the contractor alone is responsible for delay as determined by the Authority while granting the Extension of Time.

Within 20 days of receipt of the letter of acceptance the successful tenderer shall deliver to the Employer a Additional Security Deposit for unbalance tenders accordance with clause 24.3 of ITT of the Conditions of Contract.

The successful Tenderer shall deliver to the Employer a Security deposit in any of the forms given below for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders in accordance with the Conditions of Contract.

Bidder should quote their rate exclusive of GST

DEFECT LIABILITY PERIOD IS 735 DAYS

Technical Criteria

General

Banker Details for reference

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

b) Satisfactorily completed (at least 90percent of the Contract Value), as prime contractor, at least One similar work such as Similar nature of work of value not less than Rs.29.34 Lakhs (Usually not less than 50percent of estimated value of contract)

Work Done Certificate

c) Executed in any one year the following minimum quantities of work 1. pcc/rcc-140.00 Cum 2 Steel reinforcement-12.60Tonne 3 laterite Size stone masonry-65.00 Cum 4 Cement mortar plastering-815.00 Sqm 5.vitrified/ceramic glazed floor tiles flooring-148.00 Sqm

Work Done Certificate

Capabilities of Vendor

Qualification of the Tenderer: 3.1 To qualify for award of this contract, each tenderer in its name should have in the last five years i.e 2019-20 to 2023-24 (a) achieved in at least two financial years an average annual financial turnover (in all classes of civil engineering construction works only) of Rs. 58.68 Lakhs.

Audited CA Certificate of Annual Turnover

3.4.Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity - (AxNx2.5 - B) Where Maximum value of civil engineering works executed in any one year during the last five years (updated to 2024-25 price level) taking into account the completed as well as works in progress N-Number of years prescribed for completion of the works for which Tenders are invited. 08 MonthS. B- Value, at 2024-25 price level, of existing commitments and on-going works to be completed during the next month 08 months (period of completion of the works for which Tenders are invited)

Others -- Workdone & Ongoing works Statement as format given in Bid document

Machineries 1. Concrete Mixer-01 no (01 own) 2. Plate vibrator-01 no (01 own) 3. Needle vibrator-02 no (01 own & 01 Leased/hired)

Others -- Purchase invoice and latest insurance copies

All the necessary certificate should be submitted in the prescribed Format as given in Bid Document. Any certificates suporting to the requirements of the qualifications other than prescribed format in Bid document will not be considered and there Tender will be rejected.

Others -- Certificates to be furnished in prescribed format

List of existing commitments and ongoing works

Others -- Work in hand certificate

List of works for which tenders already submitted

Others -- On going work list

Financial Status

liquid assets and /or availability of credit facilities of not less than Rs.17.60 Lakhs (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc

Line of Credit

Annual Turnover

ITR Filed Copy (Mentioning PAN)

Others

Contractors Registration

PWD Registration Certificate (Class I/II/III/IV)

Fee & Financial Details

Tender Fee Amount

₹1,470

EMD Fee Amount

₹1.2 L

Important Dates

Last Activity

12 Jun 2024

Published

12 Jun 2024

Bid Opening

22 Jun 2024

Download Ends

19 Jun 2024

BOQ Preview

•

CONSTRUCTION OF LADIES REST ROOM AT MAVINAKURVE IN BHATKAL TALUK OF U.K.DISTRICT

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

•

Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super...

•

Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacen...

•

Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than ...

•

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...

•

Providing 15 mm cement plaster on rough side of single or half brickwall finished with a floating coat of neat cement of mix: 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

•

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

•

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...

•

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, lai...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming toIS : 15622, of approved make, in all colours, shades, ex...

•

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

•

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 Itr/10 m2 over and including priming coat of exterior primer applied @ 2.20 kg/10 m2) with paint...

•

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...

•

Providing Mathi or Nandi wood frames of Doors,windows,clerestory windows,ventilators and other frames,wrought,framed of assembled including making plaster of grooves (excluding cost of cement concrete...

•

Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per d...

•

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

•

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

•

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

•

Providing and fixing M.S. grills of required pattern in frames of win- dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to ope...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

•

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

•

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

•

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wa...

•

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

•

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with ...

•

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (PWD SR 2023-24 Vol 2, Page ...

•

Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete (PWD SR 2023-24 Vol 2, Page No 105 Sl. No 12.62)

•

Providing and fixing aluminium tower bolts, ISI marked, anodised (an odic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc....

•

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 32 mm nominal bore (PWD SR 2023-24 Vol 2, Page No 117 Sl No 13.4.2)

•

Providing and fixing brass bib cock of approved quality: 20 mm nominal bore (PWD SR 2023-24 Vol 2, Page No 117 Sl. No 13.2.2)

•

Providing and fixing brass stop cock of approved quality: 20 mm nominal bore (PWD SR 2023-24 Vol 2, Page No 117 Sl. No 13.3.2)

•

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

•

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

•

Providing, fixing, applying of contraction joint with suitable type PVC water stopper,PVC pipe - OD 50mm and 6 Kg/sqcm(PWD SR 2023-24 Vol.5 page no. A44 Sl no-655)

•

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

•

Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incha...

•

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments.(PWD SR ...

•

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

•

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clam...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVCplain & brass threaded fittings This includes jointing of pipes ...

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

government notification BC LOC letter to be issued by the Bank.pdf

Others - LOC Format • 1.73 MB

Indent 51 KW-3 RS 82 LAKHS.doc

Tender Document • 2.19 MB

GST declaration Form.pdf

Others - GST declaration form • 0.37 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Retender

Works

Buildings

CONSTRUCTION OF LADIES REST ROOM AT MAVINAKURVE HARBOUR IN BHATKAL TALUK OF U.K.DISTRICT

Infrastructure Development Ports And Inland Water Transport Department

Executive engineer Karwar | Karnataka

Amount: Refer DocsCloses: 21 Jun 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published12 Jun 2024
Closed21 Jun 2024
Retendered12 Jun 2024