Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.2 LAccepted-AOC 487 A 1 GOPAL MISHRA ROAD BEHALA KOLKATA 700034 | KOLKATA | WEST BENGAL | 700034 | ₹2.2 L | L1 | Accepted-AOC L1 |
| 2 | L2₹2.2 L+₹5,082 (2.35%)Rejected-Finance 1 1E KHODAGONGE ROAD KOLKATA 700 010 | KOLKATA | KOLKATA | WEST BENGAL | 700010 | ₹2.2 L+₹5,082 (2.35%) | L2 | Rejected-Finance L2 |
| 3 | L3₹2.3 L+₹9,438 (4.37%)Rejected-Finance 112 21 A 2 K N MUKHERJEE ROAD P O TALPUKUR BARRACKPORE 24 PGS N | 24 PARAGANAS NORTH | WEST BENGAL | 700028 | ₹2.3 L+₹9,438 (4.37%) | L3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | MIK ENTERPRISES L3 | STAR ENTERPRISE L1 | COSMOS CONSTRUCTION L2 |
|---|---|---|---|---|---|---|
| 1.00 | Cost of removing & refitting of motor of V.T. pump as per manufacturers manual & refitting it on pump with alignment with all tools, tackles & sundry material as per direction.
Up to 250 kw motor | 1 | No | 5,622 ₹5,622 | 5,387 ₹5,387 Lowest | 5,514 ₹5,514 |
| 2.00 | Preliminary checking of the whole motor (LT sq. cage IM) and testing of I.R. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of D.E. & NDE shield bearing housing etc. before work to detect fault. | 1 | No | 5,112 ₹5,112 | 4,898 ₹4,898 Lowest | 5,014 ₹5,014 |
| 3.00 | Complete rewinding of 415 volts grade ,3 ph,50 Hz, induction motor for VNC pump set with copper winding wires of suitable size(KSB make) and strips including varnish treat and cure winding and testing ,trial run,installation and commissioning as per direction of EIC. The motor rating 37 KW(50 HP) ,synchronous speed -1000 RPM | 1 | Item | 1,73,505 ₹1,73,505 | 1,66,256 ₹1,66,256 Lowest | 1,70,180 ₹1,70,180 |
| 4.00 | Refitting the pump motor (LT sq. cage IM) set with all its necessary coupling and accessories to its original position including fitting fixing with bearing housing non-reversable rachet unit and pump shaft with proper tolerance and clearance and reconnection of terminal points the overhauling work i.e. cleaning of contracts sliping etc. (all connection strips, cable end are to be refitted in proper way including good damages of strip terminals) and satisfactory 2 hours trial run of the pump as per direction of E.I.C. for all pumping stations. | 1 | No | 2,836 ₹2,836 | 2,717 ₹2,717 Lowest | 2,781 ₹2,781 |
| 5.00 | Positioning the motor from vertical to horizontal state by OH crane and manual labourer. Dismantling the motor by opening DE NDE shield covers, coil guard and taking out rotor from stator. Properly cleaning of the rotor including withdrawals of deposited sulpher sludge moistures from all the end ring bar joints neatly. Brazing of the double cage rotor bars with end rings by high skilled mechanics with silver brazing artical using silver brazing flux. Neatly surfacing of the newly brazed laminated rotor surface and installing the bar joints with Dr. Beak’s graded insulations.
Upto 75KW LT sq. cage IM | 1 | No | 8,072 ₹8,072 | 7,735 ₹7,735 Lowest | 7,917 ₹7,917 |
| 6.00 | Properly checking of the motor, testing of developed IR value, load current factor, terminal lead joints, terminal bar etc. necessary repairing works | 1 | No | 5,460 ₹5,460 | 5,232 ₹5,232 Lowest | 5,355 ₹5,355 |
| 7.00 | Supplying of following XLPE insulated Aluminium conductor armoured cables of 1.1 KV grade as per IS 7098.
3 core x 50 Sq mm | 30 | Mtr | 647 ₹19,410 | 620 ₹18,600 Lowest | 634 ₹19,020 |
| 8.00 | Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting | 30 | R.M | 85 ₹2,550 | 81 ₹2,430 Lowest | 83 ₹2,490 |
| 9.00 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below:
3.5 core x 50 Sq mm | 6 | Each | 223 ₹1,338 | 213 ₹1,278 Lowest | 218 ₹1,308 |
| 10.00 | Finishing the end of following XLPE/PVCa rmoured cables by crimping method incd. supplying and fixing soiderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :
3.5 core x 50 Sq mm | 6 | Each | 254 ₹1,524 | 243 ₹1,458 Lowest | 249 ₹1,494 |
Tender Value
Refer Docs
EMD Value
₹4,400
Closing Date
3 Jul 2026, 1:00 pmClosed
Executive Engineer, GAP-I, EM, KMDA
Office of the Executive Engineer, GAP-I, EM, KMDA, 83 1A Vivekananda Road, 3rd floor, Kolkata-700006
Repairing, rewinding and overhauling of 50 HP motor set no-2 along-with allied works at Serampore MPS under Serampore Municipality.
2026_KMDA_1028488_1
02/EE(E/M)/GAP-I/ EM/KMDA /T-02(E)/2026-27 Dt. 12/06/2026
Open Tender
Electrical Work/ Equipment
Item Rate
10 days
Serampore
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹4,400
Office of the Executive Engineer, GAP-I, EM, KMDA
24 Aug 2026
25 Jun 2026
6 Jul 2026
25 Jun 2026
3 Jul 2026
25 Jun 2026
29 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Cost of removing & refitting of motor of V.T. pump as per manufacturers manual & refitting it on pump with alignment with all tools, tackles & sundry material as per direction.
Up to 250 kw motor | - | No | - | - |
| 2 | Preliminary checking of the whole motor (LT sq. cage IM) and testing of I.R. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of D.E. & NDE shield bearing housing etc. before work to detect fault. | - | No | - | - |
| 3 | Complete rewinding of 415 volts grade ,3 ph,50 Hz, induction motor for VNC pump set with copper winding wires of suitable size(KSB make) and strips including varnish treat and cure winding and testing ,trial run,installation and commissioning as per direction of EIC. The motor rating 37 KW(50 HP) ,synchronous speed -1000 RPM | - | Item | - | - |
| 4 | Refitting the pump motor (LT sq. cage IM) set with all its necessary coupling and accessories to its original position including fitting fixing with bearing housing non-reversable rachet unit and pump shaft with proper tolerance and clearance and reconnection of terminal points the overhauling work i.e. cleaning of contracts sliping etc. (all connection strips, cable end are to be refitted in proper way including good damages of strip terminals) and satisfactory 2 hours trial run of the pump as per direction of E.I.C. for all pumping stations. | - | No | - | - |
| 5 | Positioning the motor from vertical to horizontal state by OH crane and manual labourer. Dismantling the motor by opening DE NDE shield covers, coil guard and taking out rotor from stator. Properly cleaning of the rotor including withdrawals of deposited sulpher sludge moistures from all the end ring bar joints neatly. Brazing of the double cage rotor bars with end rings by high skilled mechanics with silver brazing artical using silver brazing flux. Neatly surfacing of the newly brazed laminated rotor surface and installing the bar joints with Dr. Beak’s graded insulations.
Upto 75KW LT sq. cage IM | - | No | - | - |
| 6 | Properly checking of the motor, testing of developed IR value, load current factor, terminal lead joints, terminal bar etc. necessary repairing works | - | No | - | - |
| 7 | Supplying of following XLPE insulated Aluminium conductor armoured cables of 1.1 KV grade as per IS 7098.
3 core x 50 Sq mm | - | Mtr | - | - |
| 8 | Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting | - | R.M | - | - |
| 9 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below:
3.5 core x 50 Sq mm | - | Each | - | - |
| 10 | Finishing the end of following XLPE/PVCa rmoured cables by crimping method incd. supplying and fixing soiderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :
3.5 core x 50 Sq mm | - | Each | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.28 MB
BOQ_2526177.xls
BOQ • 0.33 MB
Form.pdf
Tender Documents • 0.66 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .