Balance Part of Block D,E,F,J,K,3B and 4B for 2 BHK type flats at Additional Transit Accommodation at Vessu, Qazigund, Kulgam

Providing and laying of hand packed stone soling (size 150mm-230mm) before laying of nmud mat compacted consolidated rammed filling thevoids compacting all complete carriage upto site of work all head loads complete job

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work upto plinth level:1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size).

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size).

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works (1:1.5:3) in foundation upto floor level.

Supplying, filling with river sand /nallah muck in 20 cm layers including watering compacting and dressing under flooring in ground floor

Centring and shuttering including strutting, proping etc. And removal of formwork Suspended Floor, roofs, landings, balconies and access platform ( slabs)

Reinforcement for RCC works including straightening, cutting, bending, binding & placing in position all complete. TMT steel bars

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation/ plinth and Superstructure in cement mortar 1:6 ( 1 cement : 6 coarse sand )

Cement concrete flooring 1:2:4 (1 cement, 2 coarse sand, 4 graded stone aggregate) finished by a floationg coat of neat cement including cement slurry but excluding the cost of nosing of steps etc complete. 50mm thick with 20 mm nominal size stone aggregate, crushed stone.

P/L 40mm thick levelling course under flooring to cover the concrete (1:2:4) mix crushed aggregate.

Providing and fixing glass strips in joints of cement concrete floor 40mm wide and 4mm thick.

Providing and laying Vitrified floor tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:4 (1cement: 4 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. (600x600mm) (kajaria/somany)

Providing and laying of kota stone flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shape of the slab including rubbing and polishing complete with base of cement mortar 1:4 , 18mm thick.

Providing and fixing of Black Granite 18mm gang saw cut polished above kitchen top, floor or vertical surfaces as per requirement with moulding & granite polish including supply of all materials & labour etc, as per approved by Engineer. ( area of slab over 5 sqm)

Providing and fixing of Kota stone slab flooring over 18-20mm thick in skirting/dado ( sample to be approved by the Eic) laid over 12mm thick base of cement mortar 1:3 ratio (1 cemet :3 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing, moulding complete job.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with waterproofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

15mm thick cement plaster in 1:6 cement mortar in walls using coarse sand.

6mm thick cement Plaster on ceilings and soffits of stairs upto any level in cement mortar in 1:3 (1 Cement: 3 coarse sand). (Ceiling) including all carriages.

Providing and applying P.O.P Putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

P.O.P Cornice in ceilings 75mm wide with required thickness in specified areas as per specified pattern.

Internal wall painting with emulsion paint of approved brand and manufacture to give even shade. Two or more coats on new work

Finishing external walls with Wall putty of Standard Brand in two coats to make surfaces even including a coat of cement water primer including apex spectrum or equivalent finish including scaffolding costs and removal of same after the completion of job.

Finishing of external facade with specified pattern of dajjidewari of deodar wooden planks 12mm thick 100 mm wide fixed with wall by way of drilling of screws / nails and finishing of the wooden planks by way of sand papering machine grinding, priming with two or more coats including a coat of fevicol and wood filler where necessary including painting two or more coats of wood paint of approved shade and a coat of black japan on the inner side , complete job.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Two or more coats on new work including priming coat of approved brand.

Providing and fixing 1st class Ceramic glazed Wall tiles conforming to IS 13753 of minimum thickness of 5mm of approved make like KAJARIA, SOMANY/RAKS or equivalent make in colour shades except begundy bottleneck green , black of any size as approved by Engineer In-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1 : 3 (1 cement : 3 coarse sand sand) and jointing with grey cement slurry @ 3.3 Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete including all carriages

Providing and fixing ceramic Glazed Floor tiles (300x300mm thickness to be specified by manufacturers) of ist quality conforming to IS: 13755 of approved make like KAJARIA, SOMANY or equivalent make in colour shades such as white, ivory, grey, fume red, brown over 20 mm thick bed of cement mortar 1 : 4 (1 cement : 4 coarse sand sand) and jointing with grey cement slurry @ 3.3 Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete including all carriages

P/F of 40 mm thick 300 mm wide eaves boarding of best quality kailwood, with moulded edge as per specifications.

Providing and fixing of 19mm thick T & G ceiling soffits including cost of wooden framework

Providing and Fixing of Colour normal coated corrugated CGI galvanised sheets CGS 0.60 mm thick class-3 sheets fixed to the supporting structure with 8mm dia GI J/L hooks or screws properly drilled, GI limpet and bituminous felt washers, including plain ridges, valleys etc, all included, but excluding cost of supporting structure.

Supply and fixing of 38 mm thick frame of 1st class Silver/K.D/Mirinda wood (Seasoned) panelled shutter with panelling of teak wood 18mm. thick termite proof phenol bonded board with decorative teak veneering on both faces of suitable pattern including beadings clippings etc fixing of wooden cleats, door stoppers and adjustment of anodized aluminium hinges, bolts, locks, handle, springs, etc. complete with all the fittings as per drawing and specifications. (Rates to include cost of cleats, stoppers, hinges, lockable handle sets of Godrej make, springs as per requirement but including cost towards aluminium sliding / tower bolts and aluminium handle as per drawings specified

Providing and fixing of 38mm thick frame of first class Silver/Marinda wood (seasoned) with wire gauge standard gauze hard drawn steel wire fabric of wire dia 0.63 aperture size 1.4mm as mosquito proof for doors including beadings including beadings clippings etc fixing of wooden cleats, door stoppers and adjustment of anodized aluminium hinges, bolts, locks, handle, springs, etc. complete with all the fittings as per drawing and specifications. (Rates to include cost of cleats, stoppers, hinges, lockable handle sets, springs as per requirement but including cost towards aluminium sliding / tower bolts and aluminium handle as per drawings specified

Providing and fixing wardrobe shutters including all shelves of laminated 19mm thick board and all hardware's like channels etc as per drawing and specification. (Face Area)

Providing and fixing modular kitchen cabinets 19 mm thick water proof plybwood thick board , above and below counter along with all hardware's like channels ,knobs etc as per drawing and specification incld. Laminated as per directions of Engineer -in-charge. (Face Area)

P/F of 5mm sheet glass of saint gobain or equivalent including cost of kail wood beading & nails etc. Complete job.

Providing and fixing of 35mm thick glazed shutter for windows of first class Silver/Saal/Marinda wood (seasoned) including cost of hinges hardware fittings tower bolts handles staysglazing for the same all complete job as specified in the drawings..

Providing and fixing of 35mm thick wire guaze shutters for windows of first class Silver/Saal/Marinda wood (seasoned) including cost of hinges hardware fittings tower bolts handles staysglazing for the same all complete job as specified in the drawings.

P/F of MS grill of of required pattern & design vertical and horizontal as per design excluding cost of rail pipe fixture fittings. Priming coat and two or more coats of painting including the cost of screws / bolts complete job fixed to opening by welding/Window frames.

P/F of M.S. Pipe rail with all screws fittings painting polishing all complete job

P/F of MS grill of of required pattern & design vertical and horizontal as per design excluding cost of rail pipe fixture fittings. Priming coat and two or more coats of painting including the cost of screws / bolts complete job fixed to opening by welding

Providing Plinth protection 50mm thick of M-10 nominal mix (max agg. size 20mm) concrete including smooth finishing the top surface. Providing under layer for plinth protection including preparation of ground 75mm thick (un-compacted) layer of dry stones aggregates (40mm nominal size) well rammed and grouted with sand.

Providing & fixing water closet squatting pan (Indian Type W.C pan) with 100 mm P or S trap, 10 litre low level P.V.C flushing cistern including flush pipe ( hindware) manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: Orissa pattern white vitreous china W.C. Pan of size 580 X 440 mm with integral type foot rests.

Providing & fixing Ivory White Vitreous China pedestal type water closet (European type W.C. Pan) with seat and lid, 10 litre low level white P.V.C flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever required. W.C. Pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I/M.S brackets, 15mm C.P. Brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: Ivory White Vitreous China Wash Basin (hindware) size 630x450

Providing fixing of Vitreous china Pedestal (Hindware) of standard pattern for wash basins completely recessed at the back for the reception of pipes and fittings

Providing & fixing Salem Stainless Steel A ISI 304(18/8) Kitchen Sink as per IS:13983 with C.I. Brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: 610 X 510 mm bowl depth 200 mm

Providing & fixing PVC Flexible waste Pipe, of 40mm dia. for sink or wash basin coupling etc. complete.

Providing & fixing Stainless Steel Jali (Grating) with or without hole for waste pipe for N. Trap. Weight not less than 70 gms.

Providing & fixing Mirror of size 600 mm x 400 mm of superior size with bevelled edge with 6mm thick hard board back fixed to wall with wooden cleats and C.P. brass screws & washers complete.

Providing and fixing 600 X 120 X 5 mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. Brass fittings guard rail complete fixed with 40 mm long screw, rawl plug, etc. Complete.

Providing & fixing C.P. brass Toilet paper holder of complete.

Providing & fixing C.P. Brass Towel rail with C.P. Brass brackets fixed to wooden cleats with C.P. brass screws.

Providing & fixing PVC Water or Vent pipe 110 mm internal diameter with cowl. And necessary bends, junctions, inclusive of rubber washers, adhesives, complete job.

Providing & fixing of health faucet lever type to control the discharge Including all fixtures complete job.

Providing & fixing of gysers of standard 50 ltrs make like Havells or Racold including all fixtures and fittings.

Providing & fixing of gysers of standard 25lts make like Havells or Racold including all fixtures and fittings.

Providing & fixing of C.P ellipsoidal towel holder including the cost of screws complete job

Providing and fixing soap cases of C.P. Brass of standard quality

Providing and fixing G.I. Pipes complete with G.I fittings and clamps, including cutting and making good the walls etc. 15 mm dia. Nominal bore (Medium)

Providing and fixing G.I. Pipes complete with G.I fittings and clamps, including cutting and making good the walls etc. 25 mm dia. Nominal bore (Medium)

Providing and fixing G.I. Pipes complete with G.I fittings and clamps, including cutting and making good the walls etc. 32 mm dia. Nominal bore (Medium)

Providing and fixing gun metal Gate Valve with C.I. wheel of approved quality (screwed end): 32mm nominal bore

Providing and fixing ball valve (brass of approved quality complete: 20mm nominal bore

Providing and fixing15mm dia. Nominal bore Plasticized P.V.C. connection pipe with brass union 45 cms Length.

Providing and fixing C.P. Brass Shower Rose with 15 or 20 mm inlet. 150mm diameter

Providing and fixing brass bib cock 15mm nominal bore

Providing and fixing brass Stop cock 15 mm nominal bore

Providing and fixing 15mm dia. Nominal bore C.P. Brass Angle Valve

Providing and fixing 15mm dia. Nominal bore C.P. Brass close whole Basin Mixer

Providing and fixing 15mm dia. Nominal bore C.P. Brass Wall Mixer of approved quality weighing not less than 197 gms. Confirming to IS: 8931

Providing and fixing of 15mm nominal C.P. Mixer for kitchen sink with swinging spout complete job

Providing and placing on terrace 1000ltrs. Capacity high density polyethylene water storage tank of approved brand and manufacturer with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes and the base support for tanks and including heavy duty float ball valve of standard quality.

Supply and fixing 150x100mm size square mouth S.W. Gully Trap P type, with C.I. grating, brick masonry chamber and water tight C.I. cover frame 300x300mm size inside The wt. of cover & frame to be not less than 7.2 kg.

Painting of exposed pipes with two or more coats of synthetic enamel paint of approved quality over a coat of red oxide zinc chromate primer including painting of legends in English with direction arrows

Providing and fixing thermal insulation tubing (for hot water pipes chases/buried locations), elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of nominal bores and thickness including all required accessories complete as per specification. 15/32 mm dia

Supply and errecting welded steel built up or rolled sections in trusses/trussed purlins/beams/rafters upto desired span and height conforming to specified code incld. Cost of Priming coats

Septic tank: Earthwork in excavation in foundation trenches,including dewatering of trenches excavation of work.

Providing and laying of hand packed stone soling (size 150mm-230mm) before laying of mud mat compacted consolidated rammed filling the voids compacting all complete carriage upto site of work all head loads complete job.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work upto plinth level: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Brick Work with common burnt clay F.P.S. (non-modular) bricks of class designation 75 in foundation / Plinth and superstructure in Cement Mortar 1: 6.

Providing and laying of 50mm thick cement concrete flooring in rooms in M15 (1:2:4) finished with neat floating cement coat.

Centring and shuttering including strutting, propping etc. And removal of form work

P/L Reinforced cement concrete of nominal mix 1:1.5:3 mix in foundation upto plinth level.

Reinforcement for RCC works including straightening, cutting, bending, binding & placing in position all complete. TMT steel bars

12 mm thick cement plaster in 1:6 cement mortar in walls using coarse sand. .

Providing & fixing PVC pipe heavy duty, Water or Vent pipe 110 mm internal diameter with cowl. And necessary bends, junctions, inclusive of rubber washers, adhesives, complete job.

Construction brick masonry manhole in cement mortar 1:4 1 cement 4 coarse sand with RCC slab top with 1:1.5:3 mix, foundation concrete 1:4:8 mix inside plastering 12 mm thick with cement mortar 1:3 and cement florring 1:2:4 with neat cement coat complete as per design. with common burnt clay FPS non modular bricks of class designation 7.5.

Soakage pits:Earth work excavation in foundation trenches ,incl. dewatering of foundation trenches excavation of work

Providing and Laying of Random rubble stone masonary using nallah stones with bond stones in foundation & plinth dry.

Proving centering shuttering propping and removal of formwork.

Reinforcement for RCC works including straightening, cutting, bending, binding & placing in position all complete. TMT steel bar

P/L Reinforced cement concrete of nominal mix 1:1.5:3 mix in foundation upto plinth level.