Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.5 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹21.3 L+₹3.6 L (20.3%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹22.9 L+₹5.2 L (29.3%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹24.4 L+₹6.7 L (37.8%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
5 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BHOPAL
GE BHOPAL BAIRAGARH BHOPAL
REPAIR TO SEWAGE LINE SEPTIC TANKS AND SOAKAGE PITS AT SI LINES AREA UNDER GE BHOPAL
2023_MES_594023_1
8984/E8
Open Tender
Civil Works
Item Rate
334 days
BHOPAL
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE BHOPAL
₹60,000
Yes
3 Aug 2023
9 May 2023
7 Jun 2023
9 May 2023
5 Jun 2023
23 May 2023
Amount
Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline
Excavation in trenches not exceeding 1.5m wide and 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc and not exceeding 10 sqm on plan and 1.5m depth in soft/loose soil etc complete all as specified and directed.
Excavation in trenches not exceeding 1.5m wide and 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and 1.5m depth in hard rock etc complete all as specified and directed.
Returning, filing in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm etc complete all as specified and directed.
Removal of excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting points etc complete all as specified and directed.
Removal of excavated rock not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting points etc complete all as specified and directed.
Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 150 mm internal dia of pipe complete all as specified and directed.
Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 200 mm internal dia of pipe complete all as specified and directed.
Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 300 mm internal dia of pipe complete all as specified and directed.
M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.
M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.
M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 200 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.
M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 300 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.
Taking down of rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.
M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 110 mm bore of pipe etc complete all as specified and directed.
M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 75 mm bore of pipe etc complete all as specified and directed.
S&F PVC (SWR) bends ISI marked any radius of 110 mm bore complete all as specified and directed.
S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.
S&F PVC (SWR) bends ISI marked any radius of 75 mm bore complete all as specified and directed.
S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed.
S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed.
S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed.
S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe with access door complete all as specified and directed.
S&F PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe complete all as specified and directed.
S&F PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe with access door complete all as specified and directed.
S&F PVC (SWR) branch piece 110mm bore, single (single Y) equal or unequal complete all as specified and directed.
M&L for SGSW drain pipes laid in trenches of 150 mm internal diameter of pipe and jointed complete all as specified and directed.
M&L for SGSW drain pipes laid in trenches of 200 mm internal diameter of pipe and jointed complete all as specified and directed.
M&L for SGSW drain pipes laid in trenches of 300 mm internal diameter of pipe and jointed complete all as specified and directed.
M&L for reinforced concrete pipes, class NP-3, laid and jointed with collars of 150 mm bore of pipe complete all as specified and directed.
M&L for reinforced concrete pipes, class NP-3, laid and jointed with collars of 200 mm bore of pipe complete all as specified and directed.
M&L for reinforced concrete pipes, class NP-3, laid and jointed with collars of 300 mm bore of pipe complete all as specified and directed.
M&L for laying DWCP 150mm dia pipes in trenches class SN-8 conforming to IS 16098 (Part-2) in 6 mtr length with coupler complete all as specified and directed.
M&L for laying DWCP 200mm dia pipes in trenches class SN-8 conforming to IS 16098 (Part-2) in 6 mtr length with coupler complete all as specified and directed.
M&L for laying DWCP 300mm dia pipes in trenches class SN-8 conforming to IS 16098 (Part-2) in 6 mtr length with coupler complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 using 40 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.
Demolition of cement concrete reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
M&L for brick work with Fly ash bricks in cm 1:6 using modular bricks straight or curved on plan to any radius complete all as specified and directed.
M&L for brick work with Fly ash bricks in cm 1:6 using modular bricks straight or curved on plan to any radius, but except brick complete all as specified and directed.
M&L for broken bricks of gauge not exceeding 63 mm for loose filling in sokage pit, sokage wells complete all as specified and directed.
Supply only integral water proofing compound complete all as specified and directed.
Taking down cement plaster any description on brick or stone walls and including wall tiles etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:4 and to be finished even and smooth without using extra cement complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in coping, benching, bed block, lintel band, plinth courses etc and similar work including necessary form work complete all as specified and directed.
M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.
M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required for 150 mm internal dia of pipe complete all as specified and directed.
M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required for 200 mm internal dia of pipe complete all as specified and directed.
M&L for precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:4 complete all as specified and directed.
S&F of mild steel TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for RCC 1:1.5:3 type B-1 using 20 mm graded stone aggregate as in slab supported on wall, beam and column in floors, roofs, landings, balconies, canopies and in shelves and similar work complete all as specified and directed.
Use & waste for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (horizontal or sloping) for rough finished flat surface of concrete complete all as specified and directed.
Use & waste for form work to edges of concrete flats, treads breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roof and sides of bands in walls, horizontal or sloping and similar work for rough finished concrete surface exc 10 cm but not exc 20 cm wide complete all as specified and directed.
Removal of sludge by mechanical mean through suction from 10 to 25 users septic tanks / manholes and burying the sludge in pits with suitable depth & filled by earth out side the MOD land perimeter including earth work and removal of surplus soil including dewatering of water complete all as specified and directed. Note - Cleaning should be done same day by hiring machine by contractor.
Removal of sludge by mechanical mean through suction from 25 to 50 users septic tanks/ manholes and burying the sludge in pits with suitable depth & filled by earth out side the MOD land perimeter including earth work and removal of surplus soil including dewatering of water complete all as specified and directed. Note - Cleaning should be done same day by hiring machine by contractor.
Removal of sludge by mechanical mean through suction from 50 and above users septic tanks / manholes and burying the sludge in pits with suitable depth & filled by earth out side the MOD land perimeter including earth work and removal of surplus soil including dewatering of water complete all as specified and directed. Note - Cleaning should be done same day by hiring machine by contractor.
Clearing & removal of blockage of any type in WC, bathroom, kitchen including floor/nahani traps, soil waste/vent pipes gully trap upto 1st manhole, in any situation by way of cleaning / desludging and removing foreign materials to a distance up to 50 metres to the entire satisfaction, complete all as specified and directed. Note:- (a) Contractor shall detail his supervisor to office of AGE B/R I SI Lines daily by 9.00 AM who will report to concerned JE B/R /Engineer-in-Charge to receive all complaints of entire area divided in two parts i.e. Md accn & OTM accn under this contract. (b) Contractor shall provide service providers (sweepers) separately for both the areas as per the complaints list given alongwith all requisite tools, equipments, including safety measures for attending complaint and ensure completion report by 5.00 PM same day. (c) Complaint/blockage cleared in one building in a day may be for WC, bath, kitchen, floor/nahani traps etc shall be treated as one complaint. (d) Please note that all the complaints relating to internal sewage (WC/bath/kitchen etc) shall be attended within same day (within 12 hour). (e) In case any complaint pertaining to inside the building (WC/bath/kitchen) is not attended by 12.00 hours. A penalty @ Rs. 100 per complaint shall affected from contractor payments.
Clearing & removal of all blockage in sewage line of any dia of sewer lines, manholes of any section and any depth, in any situation by way of cleaning / desludging foreign materials as well as blockage of sewage line in between successive manholes manunally / mechanically including desludging of manhole /sewage line where required and odered by Engineer-in-charge and keeping sewer line functional, upto final drop/outlet into septic tank /central sewage system terminating in other joining zone/ area or into sewage wells complete all as specified and directed. Note:- (a) Contractor shall detail his supervisor to office of AGE B/R I SI Lines daily by 9.00 AM who will report to concerned JE B/R /Engineer-in-Charge to receive all complaints of entire area under this contract. (b) Contractor shall provide service providers (sweepers) as per the complaints list given alongwith all requisite tools, equipments, including safely measures for attending complaint and ensure completion report by 5.00 PM same day. (c) Please note that all the complaints relating to sewage line shall be attended within same day (within 12 hour). In case of blockage in sewage line could not be detacted/completed same day and concerned JE / Engineer-in-Charge is satisfied to the efforts applied but the same shall be attended and all blockage must be cleared by 24 hours (next day by 5.00 PM) without fails. (d) In case any complaint pertaining to clearing of blockage in sewage line is not removed /cleared within 24 hours (next day 5.00 PM). A penalty @ Rs. 100/- per complaint shall affected from contractor payments. (e) Blockage cleared between two man holes irrespective of length in between shall be treated as one complaint.
M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.
Mechanically pumping out sewage liquid from septic tanks/manholes of any size and depth and removal the same to distance n.exc 50m out side of the building perimeter including any type of T&P required etc. dewatering of water complete all as specified and directed.
Demolition of flag stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and directed.
M&L for 25mm thick cement concrete type B-1 1:2:4 (20 mm graded stone aggregated) complete all as specified and directed.
M&L for screed bed or beding layer of mortar 15mm thick for laying floor finish in CM 1:6 complete all as specified and directed.
M&L for coloured joint free non skid ceramic tiles light shade 7 to 8mm thick (square/rectangular) are of each tile exc 0.11 Sqm but n.exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.
M&L for kota stone slab flooring 20-25mm thick over cement screed base laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & mirror polishing complete all as specified and directed.
M&L for glazed ceramic coloured tiles in vertical surfaces 350x250x7mm /450x350x7mm thick set and jointed in cement slurry with joint free and pointed in white or coloured cement to match the tiles & including rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:4 complete all as specified and directed.
M&L for endura joint free colour tiles 8 to 10 mm thick (square/rectangular) area of each tiles exc 0.18 sqm but not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles. Make Johnson endura or equivalent as approved by GE.
M&L for endura joint free colour tiles 8 to 10 mm thick (square/rectangular) area of each tiles not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles complete all as specified and directed. Make Johnson endura or equivalent as approved by GE.
S&F in repairs vitreous china squatting pan of orissa pattern 580x440 mm white with integral foot rests, excluding flushing cistern and flush pipe complete all as specified and directed.
S&F in repairs vitreous china wash down water closet pan (padestal pattern), white (excluding flushing costern and flush pipe) complete all as specified and directed.
S&F in repairs PVC low level flushing cistern of 10 Litres with all internal fittings incl flush pipe and fixing to supply pipe complete all as specified and directed.
S&F in repairs vitreous china wash hand basin white flat back of size 550 x 400mm excluding tap but including brackets and CP brass 32mm waste coupling complete all as specified and directed.
S&F in repairs angle valve stopcock cast copper alloy, screwed down high pressure chromium plated screwed both ends for iron pipe or for unions of 15 mm bore and fixed complete all as specified and directed.
S&F in repairs bib taps cast copper alloy, screwed down high pressure chromium plated screwed for iron pipe of 15 mm bore and fixed complete all as specified and directed.
S&F in repairs wash basin mixutre, single lever extended basin mixer (height 95mm ) with popup base system with 450mm long braided hoses, chromium plated, screwed down high pressure, screwed for iron pipe of 15 mm bore etc and fixed complete all as specfied and directed.
S&F in repairs CP health faucet suitable of 15mm bore with connecting pieces including all necessary fittings and accessories complete all as specified and directed.
S&F in repairs Plastic water closet seat cover, white, closed pattern with flat bottom, and mild steel chromium plated for aluminised hinging device complete.
S&F in repairs vitreous china bowl urinal flat back, size of 465x355x265mm white (minimum), with grating and union for discharge pipe including waste pipe complete all as specified and directed.
S&F in repairs bib cock two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe of 15 mm bore and fixed complete all as specified and directed.
S&F wash down water closet with seat cover, waste pipe, cistern with lid & fittings (complete set) and fixing complete all as per manufacturer instructions complete all as specified and directed. Cat No: 92045. Make Hindware or equivalent as approved by GE.
S&F in repairs Vitreous China bowl urinal flat back, size of 465x355x265mm white (minimum) with grating and union for discharge pipe including waste pipe complete all as specified and directed.
S&F in repairs urinal sensor operated star white including fixing to walls and installation complete all as specified and directed. (Make-Jaguar Cat No. 60021 or equivalent as approved by GE)
S&F in repairs Vitreous China Urinal Half Stall type, white with union for discharge pipe including waste pipe and urinal spreader fixing with 15mm dia pipe complete all as specified and directed.
M&L for mild steel rolled/tubular sections as in manhole cover and frame as per specified jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410-W (Gde E-250) quality B complete all as specified and directed.
S&F 1.6 mm thick mild steel, plain black sheet in hearths; covering to manholes, water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. complete all as specified and directed.
M&L for preparation of old surfaces of wall including brooming, scraping down and applying two coat of white wash on walls complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of steel & iron work & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block (Reflective type) in any shape and size comfirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement & pigment complete all as specified and directed.
M&L for taking out old existing interlocking paver blocks any thickness, size & type from the existing location including sand dust, stacking properly the serviceable tiles for reuse; removal of the unserviceable materials & disposal to low lying areas at a distance not exceeding 250m and relaying the paver blocks by providing 50 mm thick stone dust cushion and joints filled with sand complete all as specified and directed. Note: The quoted rate is deemed to include for coarse sand & dust as required at site.
M&L for machine pressed precast concrete interlocking paver block (Reflective type) in any shape and size comfirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement with pigment complete all as specified and directed.
M&L for sand filling under paver blocks including spreading levelled watering and well ramming in layer not exc 25 cm complete all as specified and directed.
M&L for rendering 15 mm thick cement mortar on brick/stone surfaces or surfaces other than fair faces of brick work in cement mortar 1:6, even and smooth finish without using extra cement complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall and applying two coat of white wash on walls complete all as specified and directed.
Demolition of concrete in ground floors and pavings (unreinforced) nexc 15 cm thickness below or above ground level complete all as specified and directed.
M&L for 50 mm sand stone slabs in foothpath, sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:3 or cement mortar 1:4, complete all as specified and directed.
Deduct Schedule of credit (calculation will be done off line) Rs. 24850.00
ROYAL CONSTRUCTION
SHIV SHANKAR MISHRA
M/s H V Infra Projects
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .