REPAIRS TO CERTAIN ROADS, PATH, CULVERT AND KERB STONES AT VARIOUS UNITS OF ZONE-1 IN MIL STN JAISALMER UNDER GE (ARMY) JAISALMER

Amount

M&L for bitumenous premixed asphaltic semi-dense concrete 30mm thick (consolidated thickness) with 5.5% binder (Paving bitumenous VG-30 Grade) content by weight of total mix including prepration of existing black top/ unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning and cleaning surface with gunny bags to remove all loose dirt etc and applying evenly a priming tack coat of bitumen VG-10 grade @5Kg/10 Sqm by mechanical sprayer rolled with 8 to 10 tonne power roller and compacted to required camber and gradient complete all as specified and directed by Engr-in-charge (Note: Repair of road to be carried out in patches )

Repair to Pot holes of any depth not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings).

M & L for marking 2.00mm thick center in stop line, dashes, arrows, brackets and similar work on road surfaces as per IRC pattern with thermo plastic paint of approved make and mix with 8% mica sign applicator machine, complete and traffic diversion arrangement. (Make-CMS Bombay/Shivalik/Prime-Chandigarh/Ritacto-Meerut/SN Industries-Delhi).

S & F in repair dealineator at the top portion high performance 100mm dia reflector and regular reflection of 70mmx23mm are fixed on both side of guide post. The body of guide post is moulded in ABS plastic and it is fixed on power coated steel pipe is moulded in ABS plastic and it is fid on power coated steel pipe of 1.00m height, embedded in ground with PCC 1:3:6 type C-2 of size 300x300x300mm including necessary excavation and earth work, complete all as specified and directed.

Demolition of stone masonery/stone cubs built in cement motor

M &L Squared rubble walling Jodhpur type,brought up to coursed, well bonded, bedded and solidly hearted, built in CM 1:6

Extra over for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling, Jodhpur type, brought upto courses

M & L for praparation new plastered or un plastered surfaces and applying two coats of cement base paint on surfaces of walls.

M & L Sand Stone kerb of roughly squared stones of size 20cm x 30cm, dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar 1:6 and struck flush, as specified and directed.

S&F 50 mm thick sand stone slabs Jaisalmer pattern/colour in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc not exceeding 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar (1:4) complete all as specified & directed by Engineer-in-charge.

M&L for prepration of new plastered surface of wall and applying two coat of cement base paint with a coat of Priming plastered and other surfaces with alkali resistant priming paint, complete all as specified and directed.

M&L for prepration of old plastered surface of wall and applying two coat of cement base paint , complete all as specified and directed.

Demolitoin of Concrete (reinforced) in ground floors and pavings n. exc 15 cm thickness above ground level)

M&L Providing precast cement concrete type B1 1:2:4 (20mm graded stone agg) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:6 complete.

S & F Mild steel TMT bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending and binding with & including MS wire (annealed) not less than 0.9mm dia or securing with clips.

Demolitoin of Concrete in ground floors and pavings exc 15 cm thickness above ground level)

M & L Reinforced concrete pipes, class NP2 of dia 1200mm, laid and jointed complete with collars

M & L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in, all as specified and directed.

M & L PCC type D2 (1:4:8) using 40mm graded aggregate as in foundations, filling and mass concrete

M & L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, broken stone or boulders, watered and rammed to a true surface

M & L for 100mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as in path and finished even and smooth without using extra cement

GEMRARAMCONTRACTOR

M/s. Bhati Constructions, Jaisalmer

Bhawani Construction Company

Satya Construction