Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.0 LAccepted-AOC | L1 | Accepted-AOC Lowest rate quoted | |
| 2 | L2₹29.9 L+₹82,005.03 (2.82%)Rejected-Finance OPPOSITE J K BANK BAROO NH1 HAIDERY COMPLEX BAROO KARGIL BAROO KARGIL LADAKH 194103 | KARGIL | LADAKH | 194103 | L2 | Rejected-Finance Higher rate qouted | |
| 3 | L3₹44.5 L+₹15.4 L (52.9%)Rejected-Finance | L3 | Rejected-Finance Higher rate qouted | |
| 4 | L4₹44.7 L+₹15.6 L (53.8%)Rejected-Finance | L4 | Rejected-Finance Higher rate qouted | |
| 5 | L5₹53.0 L+₹23.9 L (82.2%)Rejected-Finance | L5 | Rejected-Finance Higher rate qouted |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
20 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2022_MES_529463_1
8400-805/E8
Open Tender
Electrical and Maintenance Works
Works
330 days
PANAGARH
Class D, Cat b (i)
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹98,000
Yes
23 Sept 2022
8 Jun 2022
21 Jul 2022
8 Jun 2022
20 Jul 2022
28 Jun 2022
60 days
Amount
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable/erection of pole and getting out in hard/dense complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc. 25cm in hard/dense soil complete all as specified and directed.
Removal of excavated soil to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed
M&L for plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) for coping around poles , including necessary form work finishing even and smooth without using extra cement complete all as specified and directed.
Supply & laying sand coarse dry as in cushioning of underground electric cable in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable ) and gently punned down to 18cm thickness complete all as specified and directed. (Note :- Only punned down sand shall be measured).
M&L for fly ash bricks locally available of size 23 x 11 x 7 cm laid dry width wise across the line of cable in trenches for protection of UG cable complete all as specified and directed.
Dismantling/taking out carefully of old LT cable of any size type or core and kept aside for reuse / rerouting / jointing / replacement etc complete all as specified and directed
Dismantling/taking out carefully of old bricks any size type kept aside for reuse / rerouting / jointing / replacement etc complete all as specified and directed
Laying only serviceable bricks for protection of cable obtained during excavation from item No 8.00 mentioned here-in-before complete all as specified and directed.
Laying only of LT cable of size 10 Sqmm 2 core to 25 Sqmm 4core in trenches complete obtained from dismantling of cable and testing and make it usable at site for reuse. (Note: Jointing kit used for cable jointing to be paid separately)
M&L for laying or passing through pipe LT UG XLPE insulated, armoured heavy duty 1100 volts grade with aluminium stranded conductor of cross sectional area 25 sq mm 4 core complete all as directed.
All as per Item No 11.00 mentioned here-in-above but 16 sqmm 4 core complete all as specified and directed.
All as per Item No 11.00 mentioned here-in-above but 10 sqmm 4 core complete all as specified and directed
All as per Item No 11.00 mentioned here-in-above but 10 sqmm 2 core complete all as specified and directed
Supply and fix in repair 40mm bore, steel tubings, galvanised, light grade with all fitting laid across road , in trenches or across PCC drain or along electric pole or floor/wall etc for protection of cable complete all as specified and directed.
M&L for heat shrink type straight through jointing kit for 1.1 KV XLPE/PVC cables of size 6 to 16 Sqmm 4 core including testing after jointing complete all as specified and directed
S&F in repair GI Bracket of dia 40 mm light grade with 1.2 mtr length including fixing the fitting removed for changing the bracket and connection with existing wire etc complete all as specified and directed
S&F in repair GI Bracket of dia 25 mm light grade with 1.2 mtr length including fixing the fitting removed for changing the bracket and connection with existing wire etc complete all as specified and directed
M&L for wiring in repair for circuit / submain wiring alongwith earth wire in PVC conduit with FR PVC insulated copper conductor , 2 x 1.5 Sqmm + 1 x 1.5 Sqmm single core (or Three core 1.5 Sqmm copper conductor) in surface complete including necessary MS clamps after taking down old unserviceable wiring of any condition complete all as specified and directed. (Note: Wire and conduit will be measured as single unit).
S&F junction box (minimum size 200mm x 160mm x 98mm) in repair made of polycarbonate with IP 65 degree of protection, dust proof, water tight, light weight, acid resistant, corrosion proof insulated & shock proof, fire retardant, self extinguishing, halogen & silica free non-toxic material, UV resistant, with internally embedded gasket fitted with required connector/terminals for up to size 25 sqmm 4 core cable and hinged from Top and openable from down side and cable entry from sides or down including Glands and 10A SP MCB mounted on DIN rail for Street light connection complete all as specified and directed.
Taking down and dismantling of street light fittings of any type size and model (FTL, HPSV,MVL,MH, floodlight , LED Fittings etc), and depositing the same to MES store yard for repair/replacement if any required or as directed by Engr in Charge complete all as specified and directed.
Taking down and dismantling of garden light, Gate light fittings of any type size and model , and depositing the same to MES store yard for repair/replacement if any required or as directed by Engr in Charge complete all as specified and directed.
Fixing only of street lights/flood light taken down against the item here and above but after repair and replacement of unserviceable spares / accessories for the same including refixing of street light fittings of any size , type and model to existing pole, including necessary electric connection to fittings incl testing complete all as specified and directed. Note : Spare parts shall be measured nad paid under appropriate item as supply only.
Supply only driver for LED luminary suitable for single phase 25 watts complete incl taking out of fitting from pole and refixing after repair complete all as per existing specification. (Note: Make as per fitting fixed at site).
Supply only driver for LED luminary suitable for single phase 45 watts(120 lumen/Watt) complete incl taking out of fitting from pole and refixing after repair complete all as per existing specification. (Note: Make as per fitting fixed at site).
Supply only driver for LED luminary suitable for single phase 60 watts(120 lumen/Watt) complete incl taking out of fitting from pole and refixing after repair complete all as per existing specification. (Note: Make as per fitting fixed at site).
Supply only driver for LED luminary suitable for single phase 80 watts complete incl taking out of fitting from pole and refixing after repair complete all as per existing specification. (Note: Make as per fitting fixed at site).
S&F Post Top lantern LED type 20 watt 230 volts AC outdoor type including LED with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant with driver and lamp complete all as specified and directed.
S&F Garden light fitting with 9 W LED bulb inside the fitting, with toughened glass complete with all accessories complete all as specified and directed. (Make: Magik Cat No OGFB00001042 or equivalent in Havells/Crompton)
S&F LED street light fitting 45 Watt 230 V AC outdoor type with Efficacy > 100 LPW , 10 KV SPD, high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete suitable for GI bracket of dia 40 mm complete all as specified and directed by Engr-in-Charge
S&F LED street light fitting 60 Watt 230 V AC outdoor type with Efficacy > 100 LPW , 10 KV SPD, high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete suitable for GI bracket of dia 40 mm complete all as specified and directed by Engr-in-Charge
S&F LED street light fitting 70 Watt 230 V AC outdoor type with Efficacy > 100 LPW , 10 KV SPD, high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete suitable for GI bracket of dia 40 mm complete all as specified and directed by Engr-in-Charge
S&F LED flood light 100 watt 230 V AC outdoor type with Efficacy > 100 LPW , 10 KV SPD with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.
S&F LED flood light 120 watt 230 V AC outdoor type with Efficacy > 100 LPW , 10 KV SPD with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.
S&F LED flood light 150 watt 230 V AC outdoor type with Efficacy > 100 LPW , 10 KV SPD with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.
S&F in repair of street light timer panel made of polycarbonate body including Digital Timer Switch, 40/63A 3 phase Contactor, MCB and wiring if any required with min 1 Sqmm copper conductor cable and instrument wiring with 1.5 Sqmm fine, terminal blocks etc incl taking out old unserviceable one complete all as specified and directed .
S&F in repair of power contactor three pole 40/63 Amp 415 Volts din rail mounted type on existing panel complete all as specified and directed.
S&F in repair of Digital Timer Switch (Crono time switch) 110-240V AC 1 C/O - 2 Module on existing panel complete all as specified and directed.
M&L for repair of existing solar street light at site after taking down existing fittings such as solar panel , battery , luminairs etc , repair the same , re-assembling , re-fixing & testing complete all as specified and directed. (Note: 1.The cost of wiring if any required with suitable size copper conductor cable, terminal blocks of Battery, Charging of Battery etc deemed to be included in the item rate. 2. The cost of DC lamp , converter etc , auto switch, battery will be paid under appropriate item.)
Supply only Solar battery 12 volts 75 AH tubular complete all as specified and directed. (Note: Cost of Bty Terminal , DC cable , repairing of Bty Box etc deemed to be included in the item rate.) (Make : Exide/Amaron)
Supply only Charge controller SHLS including removal of old unserviceable one complete all as specified and directed. (Make : Bajaj / Solartech)
Supply only Solar Power Module 75 W 12 V including removal of old unserviceable from existing place in repair complete all as specified and directed. (Make : Exide/Amaron/Tata Green/Solartech)
Supply only solid state luminaire system LED 9 watt in repair complete all as specified and directed. (Make : Havells / Bajaj / Solartech).
Supply only solid state luminaire system LED 12 watt in repair complete all as specified and directed. (Make : Havells / Bajaj / Solartech).
Supply and fix LED driver for garden lights of any make as per the existing sample ranging from 7W to 15W capacity all as specified and directed
M&L for drilling hole horizontally under road ( min 1 mtr) pavement hardstanding by trenchless technology using ultra sound technique and necessary machine suitable and including 150 mm dia HDPE pipe complete all as specified and directed .
M&L for PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in foundation for stay set /Pole/ FPB etc including fair finish even and fair to exposed surfaces without using extra cement complete all as specified and directed.
M&L for PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as coping of pole/panel including necessary form work as required complete all as specified and directed
Dismantling existing steel poles/ struts, any size carefully for reuse including necessary excavation demolition of concrete transportation cost etc. and removing the old unserviceable street light fittings, rubbish etc complete all as specified and directed
All as per item No 49.00 mentioned here-in-above but PCC poles complete all as specified and directed
M&L for steel tubular swaged poles complete with cast iron/MS base plate , finial taper plug , bolts , nuts & screws as specified type 410 SP-31 , 9 meter long complete including PCC (1:3:6) type C1 (using 40 mm stone graded stone aggregate in foundation and copying with PCC (1:3:6) type C2 (using 20mm graded stone aggregate) complete including painting as existing all as specified and directed.
Supply only driver for LED flood light of 30W as per the existing complete all as specified and directed
Supply only driver for LED flood light of 80W as per the existing complete all as specified and directed.
Suppluy only driver for LED flood light of 100W as per the existing complete all as specified and directed.
Supply only driver for LED flood light of 120W as per the existing complete all as specified and directed.
Supply only driver for LED flood light of 150W as per the existing complete all as specified and directed.
M&L for MCCB 63 Amps 4 pole,415 volts 16 KA complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating)
M&L for MCCB 100 Amps 4 pole,415 volts 16 KA complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating)
M&L for earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick buried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized iron wire of 4 sqmm earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanized iron pipe 15 mm bore (light grade) including concrete pit in PCC (1:3:6) type CI, Chequered plate cover plate of size 30x30x10 cm with one handle for lifting made out of 8 mm dia MS bar, funnel wire mesh 20 mm bore galvanized iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SRR part 1 including testing on completion all as specified and directed. incl demolition to existing one complete all as specified and directed. (Note :- (i) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. (ii) Testing to be carried out by the contractor in presence of Engr- in- Charge , entered in the earth testing register, prepared and to be maintained by the contractor & submitted to Concerned JE E/M. (iii) T&P and testing instrument(Meger) to be provided by the contractor at own cost).
S&F in repair Glow sign Board in Blue base with White letters including frame work with 0.7 mm thick GI plain sheet including errection at site at any position & testing complete all as specified and directed. (Note: Necessary nut, bolt, washers, fastener , welding etc & internal lighting and electrical wiring etc required deemed to be included into the item rate.)
M&L for two coat of Aluminium paint after preparation of old surface of Steel/Iron electric poles of height 9 mtrs including pole fittings with two coat of Aluminium paint such as cross arms of any description anti climbing devices nut bolts etc and cement based paint of PCC coping and painting 03 Nos of strips of each 30cm height of Yellow & Black synthetic enamel paint alternatively above coping including numbering of poles complete all as specified and directed.
M&L synthetic enamel paint(white) on PCC pole coping and one coat of white primer up to 1.5 meter height above coping after preparation of old surface (Full height of pole to be cleaned with wire brush etc) and two coats of Aluminium paint on fittings such as cross arms of any description anti climbing devices nut bolts etc and painting 05 Nos of strips of each 30cm height of Yellow & Black synthetic enamel paint alternatively above coping including numbering of poles complete all as specified and directed.
Taking down lumanaries of High Mast and servicing/repairing/replacement of the motor, gear, chain etc complete, opening and repairing the LED flood lights by replacing the u/s parts with serviceable parts and restoring the lumanaries to top of the mast of pole, including charges for machinery/hydra required for fixing at top position complete all as specified and directed.
M&L for high mast lighting cable 4 core 10 sqmm,1100 volts,heavy duty sheath, annealed tinned copper flexible conductors, insulation having heat resisting elastomer compound complete all as specified and directed. (Note: The rate includes for dismantling of old u/s cable)
M&L for high mast lighting pole steel wire rope(as per Existing size),including taking down the u/s wire rope complete all as specified and directed . (Note: The rate includes for dismantling of old u/s steel rope)
Checking Inspection, maintanance and servicing complete Engine for routine check up for smooth functioning complete all as manufacturers instructions and all as directed by Engr - In - Charge. (Notes: 1 (a) Checking of lubricating oil condition. 1 (b) Checking engine for oil, disel, water leakage and correcting the same. 1 (c) Checking of all the nut bolts of engine. 1 (d) Checking of all belts and adjust the tenson properly. 1 (e) Cleaning of air filters. 1 (f) Checking and readjusting the valve clearance. 1 (g) Change of Oil/Fuel filters. 1 (h) Checking of startor motor battery and charger. 1 (i) Checking of cooling system and fuel system. 1 (j) To check all electric connection. 1 (k) To check indicator and head lights. 1 (l) Checking of flexible coupling of engine. 1 (m) Cleaning of crank case ventilation pipe. 1 (n) Checking of injectors and fuel pump. 1 (o) Checking of alternator and carbon brushes. 1 (o) checking of lock sensor unit of vehicles TATA 207 including replacement of unserviceable spres parts). 2. Recommended spares will be measured and paid separetely).
All as per item No 66.00 mentioned here-in-above but for Eicher 10.75 complete all as specified and directed.
All as per item No 66.00 mentioned here-in-above but Swift Dezire(LDI) complete all as specified and directed
All as per item No 66.00 mentioned here-in-above but Hero Splendor Motor cycle complete all as specified and directed
Dismantling of self-starter assembly complete from engine of Tata 207, opening of starter motor repair/replacement of worn out parts armatrure, carbon brush and re fixing the same position
Supply and replace tyre (tube less) suitable for TATA DI as per existing model No complete all as specified and directed.
Opening of suspension system complete and replacement of worn out parts of Tata 207 complete all as specified and directed
Opening of wheels and hub greasing of wheel bearing re fixing of the wheels with replacement of unserviceable parts of Tata 207 complete all as specified and directed
Dismantling of chain cover & rear/front wheel with replacement of unserviceable items complete of Hero splender complete all as specified and directed
Denting work of TATA DI/Desizer veh complete and painting of the complete veh with sutable colour complete by using spray machine complete all as specified and directed
Wheel alignment/balacing and tyre rotation of Dizer/Gypsy/maruti Omni including submission of computerised alignment report complete all as specified and directed.
All as per item No 76.00 above but Maruti Gypsy complete all as specified and directed
All as per item No 76.00 above but Maruti Omni complete all as specified and directed
Wheel alignment/balacing and tyre rotation of Eicher including submission of computerised alignment report complete all as specified and directed
Supply and fix in repairs head light assembly for TATA Xenon/ DI 207 as per manufacturer recommended make complete all as specified and directed.
Supply and fix in repairs wiper motor complete set for Tata 207, Eicher as per manufacturer recommended make complete all as specified and directed.
Replacement of engine oil grade SAE 10W30 SJ Grade (JASO MA) or any other oil recommended by the manufacturer of the vehicle complete all as specified and directed. (Make: Tide Water Oil Co. (India) Ltd/ Savita Oil Technologies Limited/. Bharat Petroleum Corporation Limited or equivalent)
Dismantling of tyre of any type of two wheeler and transport to workshop for repairing puncher and returned back and refixing tyre to the vehicle complete all as specified and directed
Dismantling of tubeless tyre of TATA mobile and transport to workshop for repairing puncher and returned back and refixing tyre to the vehicle complete all as specified and directed
Dismantling of tyre of Eicher and transport to workshop for repairing puncher and returned back and refixing tyre to the vehicle complete all as specified and directed
Taking out old unserviceable foam with cover of complete seat set and M&L new high density cushion, 100 mm thick of suitable size, 32 density and covered with new tepastry cloth(approved colour), complete all as directed, for Tata DI complete all as specified and directed.
Taking out old unserviceable foam with cover of complete seat set and M&L new high density cushion, 100 mm thick of suitable size, 32 density and covered with new tepastry cloth (approved colour) for Eicher complete all as specified and directed.
Supply and replacement head lamp assembly for Eicher as per manufacturer recommended make complete all as specified and directed.
S&F in repairs maintenance free lead acid battery 12 Volts 2.5 Ah for motorcycle including connection with manufacturers warramty not less than 36 months complete all as specified and directed. (Make : Exide/Amaron/Luminous (To be replaced only after expiry of warranty period of existing unit)
Supply and replace clutch plate and pressure plate suitable for TATA DI asper existing model no complete all as specified and directed
Supply and replace clutch plate and pressure plate suitable for Eicher asper existing model No complete all as specified and directed
Supply and replace carburator set suitable for Maruti Omni van complete all as specified and directed
Supply and replace Trail crown suitable for Maruti Omni van complete all as specified and directed
Supply and replace counter shaft pinion suitable for Maruti Gypsy complete all as specified and directed
Supply and replace master cylinder suitable for Tata DI complete all as specified and directed
Supply and replace brake pad suitable for Tata DI complete all as specified and directed
Supply and replace main shaft suitable for Tata DI complete all as specified and directed
Supply and replace synchoroniser Hub suitable for Eicher complete all as specified and directed
Supply and replace and repair of pump suitable for Tata DI complete all as specified and directed
Supply and replace and repair of radiator tank suitable for Tata DI complete all as specified and directed
Supply and replace and repair of radiator tank suitable for Eicher complete all as specified and directed
Supply and replace and repair of ECU suitable for Gypsy/Dizer complete all as specified and directed
Supply and replace and repair of wind shild suitable for Eicher complete all as specified and directed
Supply and replace and repair of wind shild suitable for Tata DI complete all as specified and directed
Supply and replace and repair of hydra boom suitable for Eicher complete all as specified and directed
Supply and replace hydrolic oil suitable for MT vehicale complete all as specified and directed
The prime cost is to be used as directed by the Accepting Officer vide condition 1 (v) and 5 of IAFW-2249 of General Condition of Contract forming part of the tender documents complete all as specified and directed. (Note: (a) Provide a prime cost of Rs 125000.00 supply spare parts of various items of vehicales like TATA 207, swift Dizre, Eicher, Hero Honda MC etc after dismantling and ordered convening BOO by the Accepting Officer. (b) Contractor quoted rate shall be included for overhead and profit and all taxes and insert amount to cover all. However, quoted amount shall not exceed 15% (Fifteen Percentage) of estimated amount. In case, the contractor quoted amount is in excess of 15% of the estimated amount, the same shall be restricted to 15% and the amounted quoted shall be corrected accordingly to work out the contract sum).
M/S Ali Trading Co
PUJA ELECTRICALS
ANSH CONSTRUCTION
R. D. Industrial
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .