SPECIAL REPAIRS TO BUILDING NO P-136 P-137 AND P-9 AT 9 BRD UNDER GE AF LOHEGAON AT AIR FORCE STATION PUNE

Amount

Dismantling plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling and wood poles/ struts, any size complete all as specified and directed.

M&L Cement concrete in foundations, filling and mass concrete 1:3:6 type C2 using 40 mm graded aggregate complete all as specified and directed.

S&F Rolled sections as in coloums, vertical posts etc. fixed with angle cleats or other connecting plates Fe 290 (Gde E-165) complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc (Gde E-250) Quliaty A complete all as specified and directed.

S&F framed work such as Grills, gratings, etc with ends of bars shouldered and or riveted, or forged into spikes, framed gaurd bars, barred iron and simmilar work con forming to FE.290. Gde-E-165 complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of ancolour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

M&L two coats of synthetic enamel painting on new steel surfaces incl a coat of redoxide primer complete all as specified and directed.

M&L two coat of synthetic enamel painting on new surface of steel of any description n exc 10 cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed.

Preparing old surfaces plastered or unplastered surfaces of walls,complete removal of existing treatment, with two coats of oil emulsion distemper over a coat of primer including 3mm thick wall care putty on wall complete all as specified and directed.

Preparing old surfaces plastered or unplastered surfaces of walls,complete removal of existing treatment, with two coats of cement paint over a coat of primer complete all as specified and directed.

Preparing old surfaces plastered or unplastered surfaces of ceiling, with two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.

preparing old steel surfaces of any description, over 10cm in width or girth,not otherwise described with two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and directed.

preparing old wooden surfaces of any description, over 10cm in width or girth,not otherwise described with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L 100 MM thick PCC 1:4:8 (using 40mm graded stone aggregate) as sub base complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, laid dry but built in cement mortar for ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:6 complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm of type C1 1:3:6 using 20mm graded aggregate in width and setting in mortar 1:6 , complete all as specified and directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth (without using extra cement) complete all as specified and directed by Engr in Charge. .Note : Supply only water proofing compound shall be measured and paid separately under relevant item).

Supply only Liquid water proofing compound all as specified and directed by Engr in Charge.

Taking down cement plaster on brick or stone wall including racking out joints hacking for key scrubbing down with the water etc, complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:6 on fair faces of block masonry or concrete surfaces finished even and smooth using extra cement, including 3mm thick wall care putty complete all as specified and directed.

M&L for rendering 5mm thick in CM 1:3 on ceiling fair faces of block masonry or concrete surfaces complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall and applying two coats of oil bond distemper over a coat of chalk whiting, on plastered surfaces, preparatory to distempering complete all as specified and directed.

All as per item 26.00 above but on ceiling complete all as specified and directed.

M & L for preparation of new decorated surfaces of walls including washing, rubbing down, stopping of painted surfaces and applying two coat of cement based paint over one coat of alkali resistant priming paint on walls all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for including old tar felt etc and removing debris outside MOD land complete all as specified and directed.

M & L for in repairs APP based polymeric membrane minimum weighing 3 kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150gms/Sqm) laid on primed surface by torch application complete all as specified and directed.

M&L preparing surfaces of roof new or previously untreated surface applying two coats of bituminous base aluminium paint over a coat of priming paints plastered coat complete all as specified and as directed.

M&L PCC 1:3:6 type C1 (20mm graded aggregate) in roof padding complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:3 mixed with WPC top of PCC padding when the surface is green finished even and smooth without using extra cement complete all as specified and as directed. Note :- Supply only WPC shall be measured and paid separately.

Taking down chowkhats with shutters (without taking off shutters from the frame) area not exceeding 1.5 Sqm each, and removing from site complete all as specified and directed.

All as per item No.22 above but area exceeding 1.5 Sqm but not exceeding 4 Sqm each and removing from site complete all as specified and directed.

Taking down shutters n.exc 1.00 Sqm each complete all as specified and as directed.

All as per item above but n.exc 2.00 Sqm in each and removing from site complete all as specified and directed.

S&F pressed steel door frame of size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc with PCC filling 1:3:6 type B-2 using 20mm grageded agg in chowkats complete all as specified and directed.

S&F 2nd class Hard wood plain solid straight chowkhats, framed rebated on the solid rounded or chamfered , put to gether with glue, pinned at joints complete all as directed

S&F for 40mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as directed.

M&L for cutting holes in to brick wall built in cement mortar for inserting hold fast exc hlaf brick and n.exc one brick and making good to dismantled portion with PCC 1:2:4 type B1 or CM 1:3 complete as specified and as directed

M&L for treating small articles such as stops, covers, gully gratings, holdfasts, ends of post, back of chowkhats etc with tar, coal tar black paint area exc 0.1 Sqm and n.exc 0.5 Sqm each complete all as directed

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, complete all as specified and directed.

S&F solid PVC door frame of size 50 mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, in opening as per specification & drawing and removing from site complete all as specified and directed.

S & F Sheet Glass, Ordinary quality 5.5 mm Thick including necessary rubber beading and removing from site complete all as specified and directed.

S&F Powder Coated Anodised aluminium frame for partitions, doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.including sealing of window/door frames with sillicon gel to avoid rain water entry etc complete all as specified

S&F powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S&F powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F Curtain rod wih brackets of fancy type 20mm dia anodised aluminum alloy conduit pipe complete all as specified and directed.

S & F galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width or aperture 1.40mm and fixed with tinned tackles or galvanished wire and removing from site complete all as specified and directed.

S&F MS Butt hinges 100 mm size as in door chowkhats and removing from site complete all as specified and directed.

S&F mild steel 300mm sliding door bolts plate type stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, complete all as specified and directed.

S&F 150mm Aluminum handle cast type anodized complete and removing from site complete all as specified and directed.

S&F aluminium anodized barrel tower bolts of extruded section of length 150mm and fixed with cadymium plated wood series, complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares area not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

All as per item No 56 above but of frosted glass and complete all as specified and directed.

Hacking out old broken glass of any thickness and size from the matel frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones and removing from site complete all as specified and directed.

M&L for preparing new surfaces of wood or wood based materials of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer and complete all as specified and directed..

M&L for 12mm thick pre-laminated particle board prelaminated both side with decorative choice lamination fixed with secrews to timber frame as in cupboard shelves and complete all as specified and directed.

Taking up or down 15 mm bore GI tubing and connection including cleaning for refixing or removal complete all as specified and as directed

Taking up or down 20 mm bore GI tubing and connection including cleaning for refixing or removal complete all as specified and as directed

Refixing old steel tubing and connection 15 mm bore in new or old position in wall, ceiling and floor etc and removing from site complete all as specified and directed.

S&F 15mm medium grade GI steel tubing including all fittings and fixed complete to wall ,ceiling and laid in floor etc and complete all as specified and directed.

Refixing old steel tubing and connection 20 mm bore in new or old position in wall, ceiling and floor etc and complete all as specified and directed.

S&F 20mm medium grade GI steel tubing including all fittings and fixed complete to wall ,ceiling and laid in floor etc and complete all as specified and directed.

S&F in repairs 15 mm dia angle cock of cast copper alloy but fancy type chromium plated screwed down high presser with crutch or butter fly handle on both ends for iron pipe or for union fixed and complete all as specified and directed.Cat No.7210 of Prayag or eqivalent Jaquar/ Hindware.

S&F in repair CP swivel shower rose for fixed with 15mm bore GI pipe & 195mm long with bend of 45degree with flange of CP .(Minimum weight 40gms and complete all as specified and directed.Cat No.6802 of Prayag or eqivalent Jaquar/ Hindware.

S&F in repairs Bib taps, fancy type CP cast copper alloy with crutch or butter fly handle , screwed down, or secrewed for iron pipe or for brass ferrule and complete all as specified and directed.Cat No.P6808 of Prayag or eqivalent Jaquar/ Hindware.

S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed Cat No.6802 of Prayag or eqivalent Jaquar/ Hindware.

S&F in repairs Waste coupling of PTMT 32 or 40mm and min wt 45 or 60gms complete all as specified complete all as specified and directed.

S&F in repairs 10 ltr capacity PVC valve less symphonic action type flushing cistern, white ,with inlet ball valve, float and handle including bracket and 32 mm dia HDPE flush pipe and connected to squat pattern /pedestal pattern water closet (Flush shall be fixed at suitable height for smooth functioning ) complete all specified and directed.

S&F PVC connection 15mm bore with PTMT nuts and 750mm long and complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white flat back size 550x400mm complete including necessary cutting for and pinning in ends of brackets ) including brackets and 750mm long PVC waste pipe 32mm bore & waste coupling 32mm dia of PTMT (half or full threaded) complete all as specified and directed.

S&F in repair vitreous china squatting pan `Orissa’ pattern, size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with ‘P’ or ‘S’ trap including provision of lime concrete bedding complete all specified and directed.

S&F 20 mm dia stop cock of copper alloy screwed down high presser with crutch or butter fly handle on both ends for iron pipe or for union fixed in repair and complete all as specified and directed.

S&F 110mm bore PVC bends of any radius complete all as specified directed.

S&F 75mm bore PVC SWR bends of any radius and complete all as specified and directed.

S&F 75mm bore PVC (SWR) vent cowl, and complete all as specified and directed.

S&F 110mm bore PVC (SWR) vent cowl,and complete all as specified and directed.

M&Lfor 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed

S&F 75mm PVC SWR pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F 110mm PVC SWR pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F cast iron nahani trap 75mm dia with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and directed.

Dismantling water tank of exc. 500ltr but n.exc 1000ltr capacity and removing from site complete all as specified and directed.

All as per Item No 85.00 above but exc 250 and n.exc 500ltr capacity complete all as specified and directed.

S&F rotational moulded polyethylene cylindrical vertical with closed top water storage tank double layered 500 Ltr capacity, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection complete all as specified and directed.

All as per item No 87.00 above but exc.500 and n.exc 1000ltr capacity complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (padestal pattern) white excluding flushing cistern, fixing bolt and flush pipe and including seat cover complete all as specified and as diected

S&F in repair Glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with chromium plated brackets guard and railing 60cm long complete all as specified and directed.

S&F in repair toilet paper holdervitreous China,box type complete all as specified and directed.

S&F in repair Vitreous China half stall urinals bowel type (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 secuing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement, fixing automatic flushing cistern with brackets flush pipe grating and union fo dischage pipe (excluding of fixing supply pipe to flushing cistern, trap) including waste pipe complete all as specified and directed.

S&F Tubular towel rail 20mm dia 600mm long CP including brackets complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exceeding 15cm thick (below or above ground level), complete all as specified and directed.

Dismantling floor hearth and wall tiles including cement mortar bedding (but not backing) and removing from site complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match all as specified including M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and directed.

M&L for nonskid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sq m but not exceeding 0.11 sqm in floors , set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.

M&L for nonskid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sq m but not exceeding 0.11 sqm in skirting , set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over andincluding 10 mm thick cement mortar rendering in CM 1:4complete all as specified and directed.

M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.

S&F 450x300x7mm thick glazed ceramic concept tile coloured on vertical surfaces such as skirting, dados, risers to steps etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 10 mm thick cement mortar rendering in CM 1:4 complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm gradded stone aggreggate as in levelling course of flooring complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 20mm thick and over and incl 15mm thick screed bed in CM (1:6) cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding and mirror polishing 7 cut as per local trade practice and cut to shape of required size complete all as specified and directed.

M&L kota stone slab 20mm thick in riser of steps skirting, dado and pillar laid over cement screed and jointed including 10mm thick rendering in CM (1:4) complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

M&L 12mm Perforated particle board/ tiles for insulation and accoustic purposes, 60x60 cm in size suspended false ceiling incl GI powder coated grid work using 2.5mmx 23.5mmx1.5mm main tee, 25mmx23.5mmx1.28mm crossed Tee & 25mmx23.5mmx1.2mm angle fixed to wall for false ceiling incl necessary supporting hanger with 6mm dia GI wire & wire J bolts washer nuts for securing frame work to ceiling, suspended @ 125 cm C/C bothways, size of grid shall be 605x605mm complete all as manufacture instruction & specified & directed by Engr- in-charge.

Taking down the existing surface batten type point wiring of aluminium for Light, fan, Sockets, power sockets, stair case light point complete with switch socket regulator , bracket fitting etc and making good disturbed surfaces for wall, floors etc complete all as specified and directed.

Taking down the sub main wiring of any dia / sq mm on teak wood batten / PVC conduit GI earth wire complete all as specified and directed.

Taking down of old US LT UG cable any size complete all as specified and directed.

Taking down cearfully by unscrewing the unserviceable DB Boxes, MC distribution boards SP & TPN with porcelain cutouts etc complete all as specified and directed.

Taking down existing tube light fittings and disconnecting connection cable ends complete all as specified and directed.

Material and labour for providing point wiring with two runs of 1.5 Sqmm multi stranded copper conductor FRLS PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core multi stranded copper conductor FRLS PVC insulated 1100 Volts grade wire for continuous earthing complete in and including PVC casing and caping/ conduit fixed in surface of wall/ceiling etc. with all accessories and open recessed type Plastic Enclosure( Plastic Switch Board ) ISI Marked (IS:14772) for housing switches / sockets complete all as specified and directed.

(a )One light point controlled by one switch.

(b) One Exhaust/Wall mounted /Ceiling point controlled by one regulator/switch

(c) One 3 pin socket 5 A on independent board.

(d) One 3 pin socket 5 A onsame board.

Material and labour for providing point wiring with two runs of 2.5 Sqmm multi stranded copper conductor FRLS PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core copper stranded FRLS PVC insulated 1100 volts grade wire for continuous earthing complete in and including PVC casing and caping/ conduit 25mm size conduit fixed in surface of wall/ceiling etc. with all accessories fixed wall and open recessed type Plastic switch board) made of robust Synthetic material Fire Proof, Anti corrosive & shock proof ISI Marked complet for housing one 15 A Switch / sockets complete all as specified and directed.

S&F Vertical double door Distribution board TPN 4 way 200 A rated busbar consisting of MCCB. 63A 18KA - 1 No complete all as specified and directed.

Supply and fix sheet metal enclosure MCB DB double door SPN 12 way 230 V with neutral link and with 200 A bus bar including suitable size wooden board mounted on wall for mounting the DB complete all as specified and directed.

Supply and fix sheet metal enclosure MCB DB double door SPN 8 way 230 V with neutral link and with 200 A bus bar including suitable size wooden board mounted on wall for mounting the DB complete all as specified and directed.

Supply and fix sheet metal enclosure MCB DB double door SPN 4 way 230 V with neutral link and with 200 A bus bar including suitable size wooden board mounted on wall for mounting the DB complete all as specified and directed.

Supply and fix sheet metal enclosure MCB DB double door SPN 16 way 230 V with neutral link and with 200 A bus bar including suitable size wooden board mounted on wall for mounting the DB complete all as specified and directed.

Supply and fix MCB SPN 40 Amp, 230 volt 'C' series complete all as specified and directed.

S&F MCB SP 240 volt 6 to 32 A 'C' series complete all as specified and directed.

Supply and fix switch piano flush type 5 A one way complete all as specified and directed.

Supply and fix socket 2in one 5 Pin 5 Amps complete all as specified and directed.

Supply and fix switch P/T 15 Amps complete all as specified and directed.

Supply and fix socket multipurpose 3 pin 6/16 Amps complete all as specified and directed.

Supply and fix ceiling rose surface type bakelite/PVC three terminal 65x50mm complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix high quality indoor Surface and wall mounted LED batten 20 Watt, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with industrial grade heavy duty driver having THD<10%. complete with all accessories internally pre-wired and including connecting up with three core 0.5 Sqmm flexible copper conductor cable ceiling rose to fitting terminal complete all as specified and directed.

Supply and fix Energy efficient recess mounted LED panel fitting 36 Watt suitable for 2x2 grid in white colour with high quality diffuser for uniform light & high Efficiency. Made from CRCA sheet, Pre-coated white color. Separate replaceable electronic driver, lumen constant of 5700/6500K colour temperature with current electronic connections complete all as specified and directed.

M & L for extention of DG set silencer pipe by providing MS pipe of dia not less than 100mm including removing and cutting of existing silencer and welding MS pipe with flange and providing proper supply support to silencer by providing MS flat from roof of the DG set complete all as specified and directed.

Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.

Supply and fix Single pole and neutral enclosure with a two pin and earth plastic plug and socket complete with one single pole MCB 32 Amp complete all as specified and directed.

Supply, laying, jointing, testing and commissioning of LT under ground cable 25 Sq mm 4 core, 1100 volts grade XLPE (cross linked polythene ) armoured with galvanised steel strip , electric power cable heavy duty, with multi stranded aluminium conductor, laid in trenches, ducts fix on walls/poles/and steel structure etc as required on site with proper size saddles and clamp laid under roads/path/ drain /colverts or enclosed in GI pipe/ fix complete all as specified and directed.

Supply and fix GI Pipe Light grade with all connected accessories of sizes 40 mm complete all as specified and directed.

M & L for sub main wiring with two runs of single core 2.5 Sq mm FRLS PVC insulated unsheathed multi stranded copper conductor 650 / 1100 V grade with colour code and one run of 2.5 Sq mm single core FRLS PVC insulated unsheathed multi stranded copper conductor green colour cable as earth continuity conductor including PVC conduit /cassing & caping complete all as specified and directed. ( Note :Three runs of 2.5 Sqmm copper cable and PVC conduit/casing caping of suitable size shall be measured & paid as one length.)

S & F Sheet metal enclosure suitable for fixing MCCB 4 pole up to 200 Amps with MCCB 160 Amps 160 Amps 4 pole 25 ka complete all as specified and directed.

S & F Sub Main Wiring with FRLS PVC Insulated multistranded copper conductor wires of size 5x25.0 sq. mm with suitable size PVC conduit fixed on surface of wall complete all as specified and directed.

S & F Sub Main Wiring with FRLS PVC Insulated multistranded copper conductor wires of size 3x4.0 sq. mm with suitable size PVC casing/caping fixed on surface of wall with all accessories complete all as specified and directed.

S & F Sub Main Wiring with FRLS PVC Insulated multistranded copper conductor wires of size 3x6.0 sq. mm with suitable size PVC casing/caping fixed on surface of wall with all accessories complete all as specified and directed.

Supply, laying, jointing, testing and commissioning of LT under ground cable 95 Sq mm 3.5 core, 1100 volts grade XLPE (cross linked polythene ) armoured with galvanised steel strip , electric power cable heavy duty, with multi stranded aluminium conductor, laid in trenches, ducts fix on walls/poles/and steel structure etc as required on site complete all as specified and directed.

Supply, Install, Test and Commissioning of LT panel indoor type powder coating with seven tank process mounted on M.S angle Iron frame of size 50x50x6mm, duly grouted with PCC foundation reqd with the following:- (a) copper bus bar 400 Amp (R Y B & N) with coloured heat shrinkable insulated sleeve 415 Volts as per IS of suitable size mounted with (a) MCCB 160 Amps 4 pole 25 KA-01 Nos (b) MCCB 125 Amps 4 pole 25 KA -02 Nos, (c) MCCB 63Amps 4 Poles 18 KA-04 Nos (d) MCCB 40 Amps 4 Poles 18 KA -01 NOs (e) MCB TPN 63 Amps 10KA- 04 Nos incl taking out old U/S LT panel complete all as specified and directed. NOTE : (i) The panel shall be got fabricated from CPRI approved manufacturer (ii) The layout drawing of the panel shall be submitted by the contractor and got approved from GE before fabrication.

Supply, Install, Test and Commissioning of LT panel indoor type powder coating with seven tank process mounted on M.S angle Iron frame of size 50x50x6mm, duly grouted with PCC foundation reqd complete all as specified and directed with the following:- (a) copper bus bar 400 Amp (R Y B & N) with coloured heat shrinkable insulated sleeve 415 Volts as per IS of suitable size mounted with (a) MCCB 160 Amps 4 pole 25 KA-01 Nos (b) MCCB 100 Amps 4 pole 18 KA -01 Nos, (c) MCCB 63Amps 4 Poles 18 KA-05 Nos (d) MCCB 40 Amps 4 Poles 18 KA -01 NOs (e) MCB TPN 63 Amps 10KA- 04 Nos incl taking out old U/S LT panel complete . NOTE : (i) The panel shall be got fabricated from CPRI approved manufacturer (ii) The layout drawing of the panel shall be submitted by the contractor and got approved from GE before fabrication.

S&F Hot Dip galvanised solid perforated cable tray and cover of width 450 mm, depth 100 mm and thickness (12 SWG) fabricated from GI sheet GI coupler plate and hardware and all nacessary Vertical or horizontal fixing arrangements as required on site complete all as specified and directed.

S&F Hot Dip galvanised perforated cable tray and cover of width 100 mm, depth 25 mm and thickness (16 SWG) fabricated from GI sheet GI coupler plate and hardware and all nacessary Vertical or horizontal fixing arrangements as required on site complete all as specified and directed.

S&F GI earth strips 32 mm x 6 mm fixed on procelane insulator fixed on wall using cadmium plateed screw or laid in tranches complete all as specified and directed.

Supply and errect vertically GI steel tubing 40 mm bore medium grade complete with fittings for raising height of existing air termination rods to site present requirements complete all as specified and directed.

M&L for providing earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6mm as earthing lead buried directly in ground vertically to a depth not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to and including galvanised iron strip 32x6 mm as earthing lead by means of bolts, nuts, check nuts & washers etc made of GI and connected to earthing test point, providing charcoal and common salt all as shown in electrical plate No. 5 of SSR Part I of 2009 & as specified or indicated and testing on completion including exaction/earth work in any type of strata PCC (1:3:6) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete (1:2:4) type B1 (reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg/sqm), funnel with wire mesh, watering pipe of 20 mm bore medium grade and lugs, including galvanised iron strip 32x6 mm with GI protection pipe of 40 mm medium grade 7.5 meter long, etc complete all as specified. Note:- (i) Venders are bound to get earthing result upto 5 Ohm for single earthings and 3 Ohm with the grid of two earthing.Any additional work and material required to achive the required result is included in the cost quoted by the tenderer.(ii) Excavated material to be removed from the site and deposit at the distance not exceeding 50m distance and levelled. (iii) Refill the pit with M&L for black cotton soil 1 cum. Note - On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost

Ditto -all as per item ser No 149.00 above but GI Wire 4 mm as earthing lead

S & F Rigid non-metallic PVC conduit 25 mm exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed.

S & F Surface mounted PVC box with cove plate suitable for mounting of RJ 11 socket 1/2 gang or Data socket RJ 45 with cat 1/2 module complete all as directed.

Ditto all as per item Ser No 152 above but 3 Module complete all as specified and directed.

S & F RJ 45 Data outlet cat 6 complete all as specified and directed

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth and getting it out for laying of cable / pole etc.complete all as specified and directed.

Soft/loose soil

Hard/dense soil

Soft/disintegrated rock

Returning/ Refilling of excavated soil including spreading levelling and well ramming in layers for any type of soil.

Removing the surplus spoil to a distance not exceeding 50 mtrs from the starting point and depositing at a height not exceeding 1.5 m above ground level.

Material and labour for stone dust sand cushioning to under ground cable, provided with a layer 8 cm before and 15 cm after laying and stretching jointing and testing the cable all as specified and directed. [Note : Measuremenet will be done after punning]

M&L for brick protection covers laid over cables of sub class'B' bricks old size (230X115X75) mm all as specified and directed.

Supply and fix GI Pipe Light grade with all connected accessories of sizes 100 mm completed as directed

Smruti Construction

shree ram enterprises

S.R.M.K Enterprises