Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.7 Cr
EMD Value
₹2.6 L
Closing Date
19 Mar 2024, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
pADMASHREE K T
Construction of 66 KV LILO line on DC towers from existing 66 KV Honnali-Malebennur D/C Line to existing 66/11 KV Malebennur Sub-Station in the existing corridor for a distance of 0.382 Km in Honnali Taluk, Davangere District and Establishing 66 KV One number of terminal bay at existing 66/11Kv S/S Malebennur in Harihar Taluk & Davanagere District on Total Turnkey Basis including Supply of all matching Materials / Equipments and Erection (Including Civil Works) of all Materials / Equipments, Testing and Commissioning.
KPTCL/2023-24/EL/WORK_INDENT706/CALL-2
KPTCL/2023-24/EL/WORK_INDENT706/CALL-2
Open
Electrical
Two Tender Document System(Two Cover)
KPTCL SEE Transmission Works Circle Davanagere
18 documents required · 18 mandatory
experience certificates refer NIT
profit and loss statement
Minimum Average Annual Turnover (MAAT) of the bidder for best three years out of last preceding five financial years ending on March or December as the case may be, shall not be less than Rs258.50 Lakhs with UDIN number. In case bidder is a holding company, MAAT shall be that of holding company only
The tenderer shall possess a valid Super Grade Electrical Contractor License issued by Govt. of Karnataka
Form C
consortium agreement with 200rs bond paper
Power of Attorney (If applicable)
risk and cast declaration
necessary men with tools & tackles.
No deviation certificate
Super Grade Electrical Contractor License
Bidder to source the supply of equipment/material from KPTCL approved Vendors only as per the QR for Vendor registration, available in the KPTCL website i.e., www.kptcl.com, Link Tendering & Procurement - application for Vendor registration.
relevant document
Litigation:The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years with KPTCL. A history of awards involving litigations against the bidder or any party or JV may result in rejection of bid.
Techno-Commercial Bid (To fill & Upload)
EPF and ESI Registration Certificate
GSTRegistration Certificate
Letter Of Under Taking in 100rs stamp paper duly signed by contractors
non performance certificates
Self Declaration for Black list / litigation
₹4,310
₹2.6 L
22 Feb 2024
22 Feb 2024
21 Mar 2024
29 Feb 2024
29 Feb 2024
line Supply Portion
Supply of Tower parts
Fabrication and Supply of galvanised 66 KV DC Towers (Kalpataru Design)
Note: Erection under LC condition.
Tower type 66kV DC-B with stubs
a) DB+3 Mtrs Extension (2.029 MT Per ...
Supply of Galvanised Bolts & Nuts
Tower accessories :
Phase plate (Set of 3No.)
Earth bond 450 mm long
Conductor & Ground wire :
Coyote ACSR: Plain Terrian under SHUT DOWN condition. (Route length of 0.382Kms)
Coyote ACSR: Plain Terrian under SHUT DOWN condition. (Route length of 0.391 Kms)
(Stringing from DD+0 (LILO tower) to Loc No.65 proposed DB+3 & DD+0 (LILO tower) to Loc No.66 proposed DB+6 in the ex...
7/3.15mm Ground Wire: Plain Terrian under SHUT DOWN condition. (Route length of 0.382Kms)
7/3.15mm Ground Wire: Plain Terrian under SHUT DOWN condition.
(Route length of 0.391 Kms)
(Stringing from DD+0 (LILO tower) to Loc No.65 proposed DB+3 & DD+0 (LILO tower) to Loc No.66 proposed DB+6 ...
Single tension strings with Silicon Rubber composite Insulator 90KN (5 Nos of Disc for Coyote Conductor) with hard wares for coyote ACSR and arcing horn Complete.
Single Suspension strings with Silicon Rubber composite Insulator 90KN (4 Nos of Disc for Coyote Conductor) with hard wares for coyote ACSR and arcing horn Complete.
Accessories for Conductor :
M.S.C joints for Coyote
Repairs sleeves for coyote
Vibration dampers for Coyote
P.G. Clamps for Coyote for jumps
Hardware and Accessories for Ground Wire :
MSC joints for Ground Wire
Repairs sleeves for Ground Wire
Tension clamp for Ground wire
P.G. Clamps for Ground Wire for jumps
line Errection Portion
Check survey using ther own equipment for 66 kV Plain terrain
Supply of Tower parts
Fabrication and Supply of galvanised 66 KV DC Towers (Kalpataru Design)
Note: Erection under LC condition.
Tower type 66kV DC-B with stubs
a) DB+3 Mtrs Extension (2.029 MT Per ...
Setting of stub templates and aligning dismantling and transportaion of templates from one location to another location for 66 kV
Supply of Galvanised Bolts & Nuts
Tower accessories :
Supplying and fixing GI angle 450 x 450 mm 1Mtr length with cleats, bolts nuts as per specification and fixing above 0.5 mts length each at inner and outer surface of tower to fa...
Supplying and fixing Barbed wire
Phase plate (Set of 3No.)
Grounding of tower with GI Pipe including the cost of 40mm dia 2.5 mm thick, class C GI pipe of 3 Mtrs length as per specifications, with 50x6 mm GI Flats 3 Mtr long, salt charcoal, including excavati...
Conductor & Ground wire :
Coyote ACSR: Plain Terrian under SHUT DOWN condition. (Route length of 0.382Kms)
Coyote ACSR: Plain Terrian under SHUT DOWN condition. (Route length of 0.391 Kms)
(Stringing from DD+0 (LILO tower) to Loc No.65 proposed DB+3 & DD+0 (LILO tower) to Loc No.66 proposed DB+6 in the ex...
7/3.15mm Ground Wire: Plain Terrian under SHUT DOWN condition. (Route length of 0.382Kms)
7/3.15mm Ground Wire: Plain Terrian under SHUT DOWN condition. (Route length of 0.391 Kms)
(Stringing from DD+0 (LILO tower) to Loc No.65 proposed DB+3 & DD+0 (LILO tower) to Loc No.66 proposed DB+6 i...
Tack welding for tower Bolts and Nuts (No. of tower X250)
Releasing and re-stringing of Coyote conductor & ground wire in the existing lines:
Releasing and re-stringing of the COYOTE ACSR Conductor in the existing 66kV Honnali-Malebennur Line from 62 DB+0 to...
Releasing and re-stringing of the GROUND Conductor in the existing 66kV Honnali-Malebennur Line from 62 DB+0 to 65 proposed DB+3 in place of DA+3 and from 66 proposed DB+6 in place of DA+0 to 78 DB+0 ...
Clearing of Bushes, tree branches etc., upto 3 Mtr width for detailed survey 66kV Plain terrain(KPWD CSR Volume 1/ VI.21/P.No 126)
line civil portion
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacen...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm
in depth, consolidating each deposited layer by ...
LINE Dismantling PORTION
Dismantling of existing Towers
Removing dismantled towers stubs upto a depth of 1 mtr by excavation and breaking the stub concrete & backfilling with the available soil complete;
Releasing of Existing Coyote conductor along with Hardware (UNDER SHUT DOWN CONDITION)
Releasing of Existing Ground wire along with Hardware (UNDER SHUT DOWN CONDITION)
Dismantling of existing 03 No. Isolator (under Shut down condition)
Dismantling of existing 03 No. Lightning Arrestor (under Shut down condition)
Dismantling of existing 03 No. Isolator support Structure (under Shut down condition)
Dismantling of existing 03 No. Lightning arrestor support Structure (under Shut down condition) = 85% * 0.072 * 3 Nos = 0.14MT
Dismantling of existing 06 No. CT support Structure (under Shut down condition)= 85% * 0.142 * 6 Nos = 0.72MT
CIRCUIT BREAKER : SF-6 circuit breakers with semi pneumatic / pneumatic operated / Spring type operating mechanism, including mounting structure with rigid, bi-metallic terminal connector suitable for...
ISOLATORS : Isolators including marshalling box, terminal connectors suitable for Drake ACSR and solid core cylindrical post insulators.
66 kV, 1250 A, 31.5 KA class double break manually operated iso...
ISOLATORS : Isolators including marshalling box, terminal connectors suitable for Drake ACSR and solid core cylindrical post insulators.
66 kV, 1250 A, 31.5 KA class double break manually operated iso...
CURRENT TRANSFORMER : Current transformer Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR.
(UNDER SUTDOWN CONDITION)
66 kV class, 31.5 KA, CT o...
SURGE ARRESTOR : (Procelain housing) metal oxide, Gapless type with rigid bimetallic connectors suitable for Drake ACSR.
60 kV, 10 KA, class - II, Normal duty Metal oxide type
Control and Relay Panel- Simplex type 110 DC compatible to SCADA complete.: 66KV Transmission line panel Simplex type
Equipments required for Integration of New Bay to Existing SCADA Panel as per KPTCL specification.
Multi Functional Transducers (MFT) 0.2 S including labour (market rate)
Opto Coupler (220V or 110V) with labour (market rate)
Currente cable - Copper core with c/s 7C X 4.0 Sqmm multistrand.
Voltage cable - Copper core with c/s 4C X 2.5 Sqmm multistrand.
Signal Cable - Armoured Copper core with c/s 10C X 0.5 Sqmm multistrand.
Supply of Control cables copper core 10C X 1.5 Sq mm Multistrand, conforming to KPTCL specifications.
RJ 45 cable for Energy meter integration to DCU (Market rate )
STATION STRUCTURES :
66KV side: station structure out of fabricated iron galvanized ( Appr. Unit wt. in MT add 5% for B&N) (UNDER SUTDOWN CONDITION)
Station Towers - ISMB 300x140 structure 12 meter l...
Station beams - ISMB 250x125 structure 7.9 meter long for Beam including angle iron cleats etc.,(0.2607 MT)
Station towers (Verticals 6T1) (0.956 MT)
Station beams (6B1) (0.504 MT)
MOUNTING STRUCTURES :
(Unit wt. in MT add 5 % for B&N)
(UNDER SUTDOWN CONDITION)
66 kV Isolator Live point height 4600 mm.
(0.76 MT per Structure)
66 kV Current transformer
(0.149 MT per Structure)
66 kV Lightening Arrestors.
(0.072 MT per Structure)
11kV Cable Terminating Structure of LV side of 66/11 KV transformer.
(0.072 MT per Structure)
BUS BAR FORMATION :Drake ACSR
Earth Wire 7/3.15mmsteel with clamp/lugs
Post insulator: Solid core polymer Rod Insulator 66 kV class.
Disc Insulators and Hardwares
Single tension string using 6 units of each 11kV, 90KN Disc insulator along with Bolted type tension clamp and hardware suitable for Drake ACSR (66kV side)
Single Suspension string using 6 units of each 11kV, 90KN Disc insulator along with Suspension clamp and hardware suitable for Drake ACSR (66kV side)
T-clamp suitable for Drake-Drake-Fire wedge connector type
T-clamp suitable for Coyote-Drake-Fire wedge connector type
Post insulator clamp suitable for Single Drake ACSR and polymer rod insulator
AC Distribution Box (Outdoor):
AC Distribution box single front type, 6 terminals, 750x1350x300 mm, 1I/C of 100A, MCCB 20kA+6 O/G MCB 16A+ 1 O/G of 100A, HRC fuse.
11kV UG Cable with required terminations Item No 49 & 50.1
11kV Class, 1X1000 Sq., XLPE, UG Cable
11kV Class, heat Shrinkable type cable termination kit suitable for 1X1000 Sq.mm XLPE UG Cable (Outdoor)
PVC insulated Copper Control Cable with Lugs / Ferrules. : 19 Core 2.5 Sq.mm. Copper Control Cables
PVC insulated Copper Control Cable with Lugs / Ferrules. : 4 Core 6.0 Sq.mm. Copper Control Cables for PTs
PVC insulated Copper Control Cable with Lugs / Ferrules. : 4 Core 2.5 Sq.mm. Copper Control Cables
PVC insulated Copper Control Cable with Lugs / Ferrules. : 2 Core 6.0 Sq.mm Copper Control Cables
PVC insulated Copper Control Cable with Lugs / Ferrules. : 2 Core 2.5 Sq.mm. Copper Control Cables
Miscellaneous Items :
Rubber mat of size 1000mm x 2000mm x 12mm size suitable for 1.1kV Class
Equipment & Earthing name Plate
CIRCUIT BREAKER : SF-6 circuit breakers with semi pneumatic / pneumatic operated / Spring type operating mechanism, including mounting structure with rigid, bi-metallic terminal connector suitable for...
ISOLATORS : Isolators including marshalling box, terminal connectors suitable for Drake ACSR and solid core cylindrical post insulators.
66 kV, 1250 A, 31.5 KA class double break manually operated iso...
ISOLATORS : Isolators including marshalling box, terminal connectors suitable for Drake ACSR and solid core cylindrical post insulators.
66 kV, 1250 A, 31.5 KA class double break manually operated iso...
CURRENT TRANSFORMER : Current transformer Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR.
(UNDER SUTDOWN CONDITION)
66 kV class, 31.5 KA, CT o...
SURGE ARRESTOR : (Procelain housing) metal oxide, Gapless type with rigid bimetallic connectors suitable for Drake ACSR.
60 kV, 10 KA, class - II, Normal duty Metal oxide type
Control and Relay Panel- Simplex type 110 DC compatible to SCADA complete.: 66KV Transmission line panel Simplex type
Equipments required for Integration of New Bay to Existing SCADA Panel as per KPTCL specification.
Currente cable - Copper core with c/s 7C X 4.0 Sqmm multistrand.
Voltage cable - Copper core with c/s 4C X 2.5 Sqmm multistrand.
Signal Cable - Armoured Copper core with c/s 10C X 0.5 Sqmm multistrand.
Supply of Control cables copper core 10C X 1.5 Sq mm Multistrand, conforming to KPTCL specifications.
RJ 45 cable for Energy meter integration to DCU (Market rate )
STATION STRUCTURES :
66KV side: station structure out of fabricated iron galvanized ( Appr. Unit wt. in MT add 5% for B&N) (UNDER SUTDOWN CONDITION)
Station Towers - ISMB 300x140 structure 12 meter l...
Station beams - ISMB 250x125 structure 7.9 meter long for Beam including angle iron cleats etc.,(0.2607 MT)
Station towers (Verticals 6T1) (0.956 MT)
Station beams (6B1) (0.504 MT)
MOUNTING STRUCTURES :
(Unit wt. in MT add 5 % for B&N)
(UNDER SUTDOWN CONDITION)
66 kV Isolator Live point height 4600 mm.
(0.76 MT per Structure)
66 kV Current transformer
(0.149 MT per Structure)
66 kV Lightening Arrestors.
(0.072 MT per Structure)
11kV Cable Terminating Structure of LV side of 66/11 KV transformer.
(0.072 MT per Structure)
Formation of Main/Cross bus with Single Drake for 66kV Side: (UNDER SUTDOWN CONDITION)
(Main Bus all the three phases in segments of using Drake conductor with fixing of insulators, levelling of strin...
Post insulator: Solid core polymer Rod Insulator 66 kV class.
AC Distribution Box (Outdoor):
AC Distribution box single front type, 6 terminals, 750x1350x300 mm, 1I/C of 100A, MCCB 20kA+6 O/G MCB 16A+ 1 O/G of 100A, HRC fuse.
11kV UG Cable with required terminations Item No 49 & 50.1
11kV Class, 1X1000 Sq., XLPE, UG Cable
11kV Class, heat Shrinkable type cable termination kit suitable for 1X1000 Sq.mm XLPE UG Cable (Outdoor)
PVC insulated Copper Control Cable with Lugs / Ferrules. : 19 Core 2.5 Sq.mm. Copper Control Cables
PVC insulated Copper Control Cable with Lugs / Ferrules. : 4 Core 6.0 Sq.mm. Copper Control Cables for PTs
PVC insulated Copper Control Cable with Lugs / Ferrules. : 4 Core 2.5 Sq.mm. Copper Control Cables
PVC insulated Copper Control Cable with Lugs / Ferrules. : 2 Core 6.0 Sq.mm Copper Control Cables
PVC insulated Copper Control Cable with Lugs / Ferrules. : 2 Core 2.5 Sq.mm. Copper Control Cables
Earth Mat formation :
Grounding of equipments with 50 x 6 mm GI flats and connecting equipments to earth mat or ground pit each point of earthing with all formation of works like bending, twisting, d...
Grounding of Equipments by providing CI pipe of 100 mm ID, 13mm thickness, 2.75 mtrs long with 2 part clamps out of GI flat 50 x 6 mm continously welded all around the pipe using Cast iron welding ele...
Supplying and providing 450mm dia and 450mm height 1.5to 2 " thickness RCC Hume pipe collar (non pressure type) for earth pits including Transportion, all lead and lifts, etc.
Release & Re-erection (UNDER SHUTDOWN CONDITION)
Release & Re-erection of existing 66kV Current Transformers
Release & Re-erection of existing 66kV Circuit Breaker
Release & Re-erection of existing 66kV Lighting arrestor
Release & Re-erection of existing 66/11kV Power Transformers (Moving of Transformer =37 MT*30 Mtr =1110 MT /m)
Release & Re-erection of 11kV Capacitor Bank
Earth work excavation by manual means for drains,canals, waste weir,draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and tec...
Earth work excavation by manual means for drains,canals, waste weir,draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and tec...
Providing and laying in position M7.5 plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per releva...
Providing and laying in position M20 Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine ...
Providing and laying in position M20 Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine ...
Providing and laying in position M20 Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine ...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work
Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site i...
Providing and installing at site of work P.V.C. pipes of 10 Kg/m2: 160mm including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linki...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Removing and Re spreading of Existing jelly
Jelly Spreading : Providing and spreading of 20/25mm jelly of thickness 100mm
M-Sand for filling over ug Cable
Bricks for filling over ug Cable
Cable tray of 300 mm width
(suitable for cable duct of D type)
CIRCUIT BREAKER : SF-6 circuit breakers with semi pneumatic / pneumatic operated / Spring type operating mechanism, including mounting structure with rigid, bi-metallic terminal connector suitable for...
ISOLATORS : Isolators including marshalling box, terminal connectors suitable for Drake ACSR and solid core cylindrical post insulators.
66 kV, 1250 A, 31.5 KA class double break manually operated iso...
ISOLATORS : Isolators including marshalling box, terminal connectors suitable for Drake ACSR and solid core cylindrical post insulators.
66 kV, 1250 A, 31.5 KA class double break manually operated iso...
CURRENT TRANSFORMER : Current transformer Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR.
(UNDER SUTDOWN CONDITION)
66 kV class, 31.5 KA, CT o...
Control and Relay Panel- Simplex type 110 DC compatible to SCADA complete.: 66KV Transmission line panel Simplex type
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Volume IIA 2 of 1 Honnali MAlebennur DC line.doc
Tender Submission Guidelines • 1.73 MB
Annexure Honnali Malebennur DC line.doc
Instructions to Tenderers • 0.16 MB
ECC Honnali Malebennur DC line.doc
Instructions to Tenderers • 0.10 MB
GCC Honnali Malebennur DC line.doc
Instructions to Tenderers • 0.16 MB
Tec Com Honnali MAlebennur DC line.xls
Techno-Commercial Worksheet • 0.77 MB
IFB Honnali Malebennur DC line.doc
Tender Submission Guidelines • 0.15 MB
ITB Honnali Malebennur DC line.doc
Instructions to Tenderers • 0.14 MB
SCC Honnali Malebennur DC line.doc
Instructions to Tenderers • 0.15 MB
Vol IIB -Honnali MAlebennur DC line.doc
Tender Submission Guidelines • 1.23 MB
Volume IIA 2 of 2 Honnali MAlebennur DC line.doc
Tender Submission Guidelines • 4.02 MB
NIT 66kV Malebennur Line-TLTB.doc
Tender Submission Guidelines • 0.13 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .