Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.5 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹29.1 L+₹62,262.80 (2.19%)Rejected-Finance DHALIWAL | L2 | Rejected-Finance Second lowest bidder | |
| 3 | L3₹29.5 L+₹1.0 L (3.65%)Rejected-Finance | L3 | Rejected-Finance Third lowest bidder | |
| 4 | L4₹32.9 L+₹4.4 L (15.6%)Rejected-Finance DHALIWAL | FIROZEPUR | PUNJAB | 142044 | L4 | Rejected-Finance Forth lowest bidder |
Tender Value
₹29.4 L
EMD Value
₹58,800
Closing Date
16 Jun 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
HPSIDC Shimla
C/o 1No. RCC over Head Centre at Storage tank 1.00 lac liter. Capacity with 18.00 mtrs. Staging height).
2023_SIDC_74327_1
Job No.4
Open Tender
Civil Works
Item Rate
90 days
Basal (Una)
Please refer Tender documents.
9 documents required · 9 mandatory
₹3,400
₹58,800
8 Apr 2024
3 Jun 2023
17 Jun 2023
3 Jun 2023
16 Jun 2023
3 Jun 2023
Amount
Excavation in foundation trenches etc.in all classification of soil in dry or saturated condition upto any depth and lift including pumping and bailing out water where required i/c stacking the seviceable material and un- servicealbe material separate as directed and then returning the stacked soil in 15 cm layers when required into plinth and sides of foundation etc. consolidating each deposited layer by ramming,watering and then disposing of all surplus excavated earth as directed by Engineer in chanrge including carriage of material in all leads and lifts disposed material to be neatly dressed leveled including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.
Providing and laying cement concrete 1:3:6(1cement: 3sand: 6 graded crushed stone aggregate 20mm nominal size) and curing complete including the cost of form work in walls and all work up to plinth level including carriage of material within all leads and lifts.including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.
Providing form work with steel plates 3.15mm thick welded with angles iron in frame 30x30x5mm so as to give a fair finish including centring,shuttering strutting and propping etc. wooden batten and ballies for all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu reinforced and plain concrete in:- (a)Foundation, footings basis of columns etc. and mass concrete including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.
(b) Columns, pillars, post and struts square or circular or curved in plan all heights.
© Beams,cantilever, girders and lintels sides and soffits of beams, beam haunchings, cantilever,girders, bressumers and lintels not exceeding 1mtr. In depth.upto all heights.
(d) Flat surfaces such as soffits or suspended floors, roofs,landings and the like floor etc.upto 200mm in thickness up to all heights.
(e) Arches ,Dome ,Vaults etc. up to all heights.
(f) Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like. Circular in plan up to all heights
(g) Stair cases with sloping or stepped soffits excluding landings up to all heights.
Providing and laying cement concrete work 1:1.5:3 (1 Cement :1.5 Sand :3 graded stone aggregate 20mm nominal size) including mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of material within all leads and lifts in:- (a) Foundation footings,bases of columns etc.and mass concrete . including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.
Reinforced cement concrete work in arches, archribs, domes, vaults, shells, folded plate and roofs having slope more than 15° up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.
Providing tor steel reinforcement (Fe 415/ Fe-500 D as per design) for RCC work including bending, binding and placing in postion complete upto all floor levels. including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.
Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces(two coats)to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials. New work (two or more coats applied @3.84 kg/10 sqm) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.
Steel work welded in built up sections,trusses and framed work including cutting,hoisting,fixing in position and applying a priming coat of read lead paint in:- In gratings, frames, guard bar, ladder, railings, brackets, knopy and similar work including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.
Providing painting steel work with Delux multi surface paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer appled @ 0.80 ltr/10 sqm of approved brand and manufacture including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.
Providing and Fixing GMS tube (medium grade) fitting (earth work to be measured and paid for separetely)including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.. (a) 80 mm nominal dia.
Providing and fixing gun metal gate valve with CI wheel of approved quality (screwed end) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.(a) 80 mm nominal dia.
Providing and fixing M.S. flanges using table 21 including required nuts, bolts, and rubber geskets washer complete including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. (a) 80 mm nominal dia.
Providing and fixing M.S. gauge for tank complete including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.
Providing and fixing aluminium strips for lightening conductor top to bottom of tank complete in all respect including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.
M/s Kamla Contruction
Nishant Puri Govt Contractor
Om Parkash Govt Contrator
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .