8361 REPAIRS TO ROOF, PLUMBING, JOINERY, FLOORING, PATH AND CONNECTED ITEMS TO CERTAIN BLDG AND INTERNAL ELECTRIFICATION AT MINTSD MD AND OTM ACCN UNDER AGE BR II SOUTH PUNE

Amount

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated / plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling of AC sheet (corrugated or semi corrugated)/PVC Sheet in roofing including ridges etc complete all asspecified & directed.

M&L 6mm thick AC corrugated or semi corrugated sheet in roofs walls etc fixed with 'L' or 'J' type hook bolt including dismantling of AC sheet (corrugated or semi corrugated)/PVC Sheet in roofing including ridges etc complete all as specified & directed.

Taking down and refixing 6mm thick AC corrugated or semi corrugated sheet in roofs walls etc fixed with 'L' or 'J' type hook bolt except sheet material complete all as specified & directed.

M&L AC two piece adjustable serrated ridge corrugated or semi corrugated sheets fixed with ‘J’ hooks & bolts complete all as specified & directed.

Taking down chowkats or frames wooden/steel with shutter (w/o taking off shutters from frames) exc 1.5 Sqm and n exc 4 Sqm each

Taking down chowkats or frames wooden/steel with shutter (w/o taking off shutters from frames) n exc 1.5 Sqm.

Taking down shutters exc 1.00 sqm and n exc 2 Sqm each complete all as specified and as directed.

S & F pressed steel frames for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 105 x 60mm filled with PCC 1:3:6 type C-0 all as specified.

S & F pressed steel frames for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 125 x 60mm filled with PCC 1:3:6 type C-0 all as specified.

S&F IInd class hard wood 35mm thick factory made, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneer particle board with commercial veneering on both faces. The size of the rail as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F IInd class hard wood 35mm thick factory made, glazed and skeleton shutter open rebated and prepared to receive glass gauge etc edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. The size of the rail and stile as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F Solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS tube, suppling and fixing in opening complete all as per specification and as directed by Engr-in-Charge

S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame all as specified and directed by Engr-in-charge.

S&F Butt hinges 100mm medium weight cold rolled, mild steel complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section 200 mm long complete all as specified and as directed

S&F in repairs aluminium anodised barrel tower bolts of extruded section 200 mm long complete all as specified and as directed

S&F aluminium anodised handle cast type, extruded section, of size 150mm complete all as specified and as directed.

S&F in repair Aluminium anodised handle cast type, extruded section of size 150mm complete all as specified and as directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

M&L for prepration of new or previously untreated wooden surface and apply two coats synthetic enamel paint over one coat of pink primer of any descriptiion, not otherwise described over 10cm width or girth complete all as specified and as directed.

M&L for prepration of new or prreviously untreated steel surface and apply two coats synthetic enamelled paint over one coat of red oxide primer of any descriptiion, not otherwise described over 10cm width or girth

M & L Water proofing treatment to sunken slab, walls, etc, shall be carried out as specified below and as directed by Engineer-in-Charge. (a) Clean the sunken portion of toilet/ Baths/ WCs/ Kitchen thoroughly remove laitance, dirt, dust etc. (b) Form angle fillet of size 40 mm x 40 mm along the junction of wall and floor using polymer modified mortar (“ Dr fixit” Pidicrete URP” or eqvt). (c) Sanitary pipes entering through walls and floor shall be sealed with “Dr Fixit Bathseal Tape” and the gaps to be grouted with non-shrink cementitous grout “Dr Fixit Bathseal Grout” or eqvt. Nahani traps etc to be fitted securely and the gaps around it to be grounted in the same manner. (d) Apply one coat of a Bitumen-modified polymer coating “Dr Fixit Bathseal Plus” or eqvt on all angle fillets by brush and cover it with 100mm open woven mesh when it is still wet. Apply second coat of the same coating on the angle fillets and allow it to dry completely. (e) In the remaining area, in dry substrate condition brush apply first coat of the same coating and further apply second coat when first is dry. Extend the coating upto 150mm

Item No. 23.00 above Contd... above the FFI. Above FFI, another cementitious waterproofing waterproof coating “Dr Fixit Pidifin 2 K” or eqvt can be further applied right upto 2.1 m to waterproof the shower area also, if it is a bathroom or bath cubicles of a sanitary annex and pply second coat after 6-8 hours and allow to dry completely. (f) After 2 to 3 days, sunken portion must be overlaid with a 50 mm thick concrete screed M 15 type B0 mixed with integral WPC (Liquid) laid to stope 1:60 towards outer face of wall. Provide 40 mm OD UPVC pipe at the lowest point with 300 mm projection beyond the outer face of the wall. Then fill up the sunken portion with lean concrete 1:5:10 type E2. (g) After completing plumbing work in the toilet/WC/Bath/Kitchen floor, tiling work (floor and dado) can be carried out using suitable Tile Adhesives and ready to make tile grouts of appd makes such as Dr Fixit, FOSROC SIKA, MC BUCHEMIE, ROFF, etc. (Note : Prices of all items discussed in the description are deemed to be included in the items except PCC 1:5:10 filling in sunken portion and PCC 1:2:4 in angle filleting.)

M&L for PCC 1:5:10 type E2 (using 40 mm graded brick aggregate) lean concrete for filling sunken floor incl demolition of cement concrete of any type etc. complete all as specified and as directed.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded brick aggregate) as in coving rounded, chamfered etc on sunken floor complete all as specified and as directed.

M & L for non skid joint free ceramic coloured (dark shade) tiles or size 300mm x 300mm x 7 to 8mm thick in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:6) including demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar etc complete all as specified and directed by Engineer-in-Charge.

M&L for Vitrified Ceramic tiles 10 mm thick Colour (square/rectangular) polished, area of each tiles exc 0.18 sqm but not exceeding 0.36 sqm, in floors etc. of light shade, set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in CM (1:6) including demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar etc complete all as specified and as directed.

M & L for glazed colour ceramic tiles of size 300mm x 600mm x 7 to 8mm thick in wall laid over and including 10 mm thick CM (1:4) backing coat , set and jointed in neat cement slurry and pointed in coloured cement to match with colour tiles including demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar etc complete all as specified and directed by Engineer-in-Charge.

M&L for 25 mm thick PCC type B0 1:2:4 (using 12.50 mm graded agg) as in floor leveling course etc. including demolition of cement concrete floor complete all as specified and as directed.

M & L for granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, Door cills ,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of old stone slabs and tiles of any description or thickness complete all as specified and as directed.

Labour only for Rounding to edges of stone slab one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.

S & F Machine cut cuddappa stone 20 to 22 mm thick both side polished bedded & jointed in CM (1 : 3) including dismantling of old stone slabs and tiles of any description or thickness

M&L for chequerred cement concrete tiles with glossy finish of size 40cm x 40cm x 20mm thick set jointed and pointed in neat cement slurry in floor with grey cement and pigment over and incl 20mm thick screed bed in CM (1:4) including dismantling of old stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar. complete all as specified and as directed.

M&L for coloured precast cement concrete interlocking paver block of glossy finish any shape and size confirming to IS-15658-2006, 60mm thick, M-35 grade with grey cement and no pigment laid over & including 30mm thick stone dust/grit including dismantling of old stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar.

M & L for machine cut kota stone slab flooring 18-20mm thick, over and including 20 mm thick cement screed base in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shed of slab including rubbing and polishing complete including dismantling of old stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar complete all as specified and as directed.

All as per Ser item No 35.00 above but in riser of steps, skirting, dado and pillars etc. complete all as specified and as directed.

M&L for cement concrete type B1-1:2:4 (20 mm graded aggregate) in coping, coving, edging etc including necessary form work complete all as specified and as directed.

Demolition of cement concrete in any position /any depth all specified and as directed.

M&L for rendering 10mm thick with ready mix cement mortar (1:6) on fair faces of brick / concrete surfaces finished even & smoth without using extra cement including taking down cement plaster complete all as specified and as directed.

M&L for rendering 15 mm thick with ready mix cement mortar (1:4) on fair faces of brick/ concrete surfaces finished even & smoth without using extra cement including taking down cement plaster all as specified and as directed.

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete incl demolition of Brick work, solid block or stone masonry built in cement mortar or cement lime mortar complete all as specified & directed.

M&L for rendering 10mm thick with ready mix cement mortar (1:6) on faire faces of brick / concrete surfaces finished even & smooth without using extra cement all as specified and as directed.

M&L for rendering 15 mm thick with ready mix cement mortar (1:4) on faire faces of brick / concrete surfaces finished even & smooth without using extra cement all as specified and as directed.

Prepration of newly plastered sureface and applying two coat cement base paint complete all as specified and as directed.

Prepration of newly plastered sureface and applying two coat oil bound distemper complete all as specified and as directed.

M & L for 15 mm bore GI tubing medium grade with all fitting and fixed complete on walls and ceilings or laid in floors etc including taking up or down steel tubing and connections, complete all as specified and directed by Engineer-In-Charge.

M & L for 20 mm bore GI tubing medium grade with all fitting and fixed complete on walls and ceilings or laid in floors etc including taking up or down steel tubing and connections, complete all as specified and directed by Engineer-In-Charge.

M & L for 25 mm bore GI tubing medium grade with all fitting and fixed complete on walls and ceilings or laid in floors etc including taking up or down steel tubing and connections, complete all as specified and directed by Engineer-In-Charge.

Taking up or down carefully steel tubing and connections including cleaning and refixing of sizes 15mm bore complete all as specified and as directed.

Taking up or down carefully steel tubing and connections including cleaning and refixing of sizes 20mm bore complete all as specified and as directed.

Taking up or down carefully steel tubing and connections including cleaning and refixing of sizes 25mm bore complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank 500 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position with 20 mm ball valve high pressure PTMT with rod & high density plastic ball including dismantling water tanks and removing to store complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank 1000 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position with 20 mm ball valve high pressure PTMT with rod & high density plastic ball including dismantling water tanks and removing to store complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting & fixing in position of capacity not exc 1000 ltrs complete all as specified and as directed.

M & L for water proofing treatment to roof slab, wall, chajjas etc; shall be carried out as specified below including removing of old water proofing treatment incl screed bed and cleaning the surface of slab with wire brushes removing dust foregin material incl flushing at junction of walll and removing the rubbish off the premises to a distance exc 500 m all as directed by Engr-in-Charge :- (a) M & L for 10mm thick plaster screed bed layer in CM 1:3 on concrete surfaces. (b) Preparing plastered surfaces of roof slab, walls, chajjas etc; by proofing with broom sweeping free from dust etc; evently applying a coat of approved bitumenous primer @ 0.20 Kg/Sqm of area complete all as specified.

ITEM No. 55.00 Contd.... (c) Laying APP polymer modified approved membrane, non woven, polyster, weighing not less than 3.50 Kg/Sqm with laps & overlaps as specified & joints sealed and applied complete by torch appplication method all as speciifed & directed by Engr-in-Charge. Carrying out test by flooding water for 24 hrs for leakage & seepage and rectifying the same to the entire statisfactory of GE. (d) Finally applying a coat of solar reflective bitumenous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as speicifed & as directed by Engr-in-Charge.

M & L for IInd class hard wood plain fillets, square, rectangular in section wrought screwed with nails area exceeding 13sqcm but not exceeding 25 sqcm complete all as specified and as directed.

M & L for 18/19 mm thick perlaminated particle board, interior grade, prelaminated one side with decorative choice laminated and other side balancing white lamination fixed with screws to timber frame work as in Shutter of Cupboards / Kitchen cupboard / Pelmets with teak beading of all sides fixed in repair complete all as specified and directed.

S & F Continuous (piano) hinges 30 mm width of flap,mild steel, bright finish or electrogalvanised complete all as specified and as directed.

S & F for 100 mm long Hasp and staple, aluminium anodised including bolt to hinge plate and fixed with screw complete all as specified and as directed.

S & F 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished complete all as specified and as directed.

S & F Magnetic door catches for cupboard / cabinet etc complete all as specified and as directed.

S& F in repair PVC cabinet with looking mirror, single shutter of size 600X450X150mm as per sample complete all as specified and directed

S&F in repair CP Brass long body bib cock MQT 512 15mm of make Jaguar or equivalent complete all as specified and directed

S&F in repair health faucet with 8mm dia, 1.2mtr flexible tube complete all as specified and directed.

S&F 15 mm bore two way bib tap chromium plated cast copper alloy long body with wall flange complete all as specified and directed

S&F in repairs 2-Way Bib cock with Wall Flange complete all as specified & directed. Make : Jaquar Product code FLR-CHR-5041N or equivalent model in Kohler as approved by GE.

Supply and fix in repairs, stainless steel plate rack of size 36inch x 31inch x 10inch, made out of 0.63mm thick stainless steel sheet (Grade AISI 304 18/8), S S screws and round pipe, fixed to wall with screws complete all as specified and as directed. (Make – Blue Star Silver Shine Cat No.KPR-315 or equivalent from Nirali/ Jain Brothers Sanitation Pvt Ltd (Jayna) or as approved by GE)

S&F in repair 10mm thick corner glass with D bracket complete all as specified and as directed.

S&F Single lever Basin Mixer without popup waste with 450mm long Braided Hoses complete all as specified and directed. (Make : Jaquar Product code ARI-CHR-39001B or equivalent model in Kohler as approved by GE)

S&F Single piece-WC with PP Seat cover, hinges, Fixing Accessories, Accessories set and cistern fittings complete all as specified and as directed. (Make : Jaquar of cat no SLS-WHT-6851S110PP or equivalent model in Kohler as approved by GE)

S&F in repairs Hand Shower (Health faucet) with 8mm dia, 1.2mtr flexible tube and wall hook with N.R.V. (back flow prevented) complete all as specified & directed. (Make :- Jaquar Product code ALD-CHR-577or equivalent model in Kohler as approved by GE)

S&F in repairs CP toilet paper holder confirming to CAT No ACN-WHM-1153S of "Jaquar" or Equivalent make as approved by GE.

S&F in repairs Soap dish holder confirming to CAT No ACN-WHM-1131N of "Jaquar" or Equivalent make as approved by GE.

S&F in repairs Wall mixer with provision for Overhead Shower with 115mm long Bend pipe on Upperside,Connecting Legs & Wall Flange complete all as specified & directed. (Make : Jaquar Product code FLR-CHR-5273UPR or equivalent model in Kohler or as approved by GE)

S&F in repairs Overhead Shower 200x200mm Square Shape Single Flow (ABS Body Chrome plated with Gray face plate) with rubit cleaning system complete all as specified & directed. (Make : Jaquar Product code OHS-CHR-35497 or equivalent model in Kohler or as approved by GE)

S&F in repairs Counter top basin of Size 610x415x160mm complete all as specified & directed. (Make : Jaquar Product code DRS-WHT-37601 or equivalent model in Kohler or as approved by GE)

S&F Bottle trap (with internal Partition) 32mm size with 250mm & 190mm Long wall connection pipes and wall flange complete all as specified & directed. (Make : Jaquar Product code ALM-WHM-769L250x190 or equivalent model in Kohler as approved by GE)

S&F high density 40mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm2 fixed complete to wall or in floors with necessary socket, elbow & bend etc complete fixed to wall or in floors etc all as complete and directed. (Note : pipe will be laid under floor)

S&F in repair plastic water closet(EWC) seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified.

S&F in repairs PVC syphon with rod for low level flushing cistern incl PVC handle with adjustable lever (flushing cistern kit) complete all as specified and as directed.

S&F in repairs flush handle PVC with adjustable Lever and hook for low level flushing cistern complete all as specified and as directed.

S&F in repairs waste fitting (coupling) brass chromium plated 32mm dia for WHB complete all as specified and as directed.

S&F in repairs waste fitting (coupling) brass chromium plated 38/40 mm dia for sink complete all as specified and as directed.

S&F in repairs 10 Itrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle. aluminium brackets for bottom support fixing with gutties embeded in wall with drilling machine etc complete all as specified.

S&F in repairs 1.25mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull but gear operated type with bevel gear box and crank handle complete all as specified and as directed.

S&F in repairs Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed

S&F in repairs Ball bearing for rolling shutters complete all as specified and as directed.

S&F aluminium powder coated fancy type curtain rod 25 mm bore all as specified & as directed.

S&F aluminium powder coated fancy type decorative brackets suitable for 25 mm dia curtain rod (minimum projection from wall 75 mm ) fixed to wall including drilling, rawl plug, screws etc complete all as specified and as directed.

S&F in repairs door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed (Al die cast body) complete all as specified and as directed.

S&F in repair brass CP wall mixer Non-telephonic shower arrangement screwed down for iron pipe of bore 15mm of make 'METRO' or of equivalent specified here-in-after.

S&F in repair 15mm bore CP bib taps, brass chromium plated, cast copper alloy fancy type handle, screwed down, screwed for iron pipes complete all as specified and as directed.

S&F in repair brass CP toilet paper holder complete all as specified and as directed.

S&F in repair brass CP towel ring complete all as specified and as directed.

S&F in repairs 20mm bore ‘D’ type brass CP tubular towel rail 60 cm long between flanges complete all as specified and as directed.

S&F in repair CP pressure adjustable shower with revolving joint complete all as specified and as directed.

S&F Stop valve brass chromium plated, fancy type with long shank and cup (concealed type) fixed to pipe of 15mm bore complete all as specified and as directed.

S&F Soap dish, brass chromium plated complete all as specified and as directed.

S&F health faucet CAT No. ALD-573 of make Jaquar or of equivalent make specified here-in-after

S&F stop valve brass chromium plated, fancy type, fixed to pipe of 15mm bore complete all as specified and as directed.

S&F stainless steel grating 75 to 100 mm dia suitable for nahani trap complete all as specified and as directed.

S&F PVC (SWR) 110mm bore pipes, single socketed in any length with rubber ring joints laid in trenches or fixed to wall including demolition & breaking up drain pipes PVC or AC set in CM or solvent 75/100/110 mm dia complete all as specified and as directed.

S&F PVC (SWR) 75mm bore pipes, single socketed in any length with rubber ring joints laid in trenches or fixed to wall including demolition & breaking up drain pipes PVC or AC set in CM or solvent 75/100/110 mm dia complete all as specified and as directed.

S&F in repair PVC (SWR) bends any radius 110 mm bore complete all as specified and as directed.

S&F in repair PVC (SWR) bends any radius 75 mm bore complete all as specified and as directed.

S&F in repair PVC (SWR) bends any radius 110 mm bore provided with access door complete all as specified and as directed.

S&F in repair PVC (SWR) bends any radius 75 mm bore provided with access door complete all as specified and as directed.

S&F PVC (SWR) junction, (Single Tee) equal or unequal 110mm bore complete all as specified and as directed.

S&F PVC (SWR) junction, (Single Tee) equal or unequal 75mm bore complete all as specified and as directed.

S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and as directed.

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and as directed.

S&F PVC (SWR) floor trap, dia of outlet 75mm, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F rolled mild steel in such as Tubes, angles etc fixed independently without connecting plates as in purlins etc complete including Dismantling wrought iron or mild steel iron of any description complete all as specified & directed.

M & L for IInd class hard wood clean sawn batten at 30 cm center to center sectional area exc 5 and n.exc 15 Sqcm etc incl Dismantling of old battens for tiles shingles etc of any size including tiling fillets exc 15 cm spacing etc. complete all as specified and as directed.

M&L for roof tiles mangalore pattern inter locking at side joints laid dry etc incl dismantling of old single layer Mangalore pattern tiles or similar tiles in roofing etc complete all as specified and as directed.

M & L for ridge tile or hip tiles to suit Mangalore pattern of roofing tiles bedded and jointed in CM (1:6) etc complete all as specified and as directed.

M&L for second class hard wood clean sawn timber fixed as in scantling including dismantling complete all as specified and as directed.

Taking down & refixing second class hard wood clean swan timber as in scantling complete all as specified and as directed.

S & F three track sliding window with two or more shutter with 4mm thick tinted glass, one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing, handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge:- Three track bottom – 20957, Three track top/vertical – 20958, Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

S&F aluminium powder coated two track sliding window with two shutters of 4mm thick tinted glass of modigaurd including good quality of bearing handle, locks, PVC rubber lining etc using following aluminium sections conforming to Cat part No. 'JINDAL' or of equivalent make complete all as specified. :- Three track bottom – 20957, Three track top/vertical – 20958, Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

S&F aluminium powder coated ventilator with moveable louvers including 100mm wide pinheaded glass strip using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, as approved all as directed by Engineer-in-Charge (a) Frame - 20048 (b) Glazing clip - 19352

M&L for aluminium powder coated louvered ventilator with provision of exhaust fan including 100mm wide pinheaded glass strip using following sections of 'Jindal' or equivalent complete all as specified and directed by Engineer-in-Charge. Frame - 20048 Glazing Clip - 19352

S&F for aluminium powder coated grill as approved by GE all as specified and as directed by Engr-in-Charge.

S&F sheet glass ordinary quality, 3mm thick and glazing with oil putty in square n.exc. 0.50 sqm in each pane including hacking out old broken glass (any thickness, size , quality or description) from metal frames , glazed with putty of fixed with beads as specified and directed by Engineer- in-charge.

S & F figured glass pin head type, 3mm thick and glazing with oil putty in square n.exc. 0.50 Sqcm in each pane including hacking out old broken glass (any thickness, size , quality or description) from metal frames , glazed with putty of fixed with beads as specified and directed by Engineer- in-charge.

S & F Aluminium anodised Powder coated section ivory/brown colour as in frame / shutters for windows/doors/ Ventilator with one or more rebates including joining cleat, glazing clips, anodised aluminium snap beading for fixing, screws, fittings such as peg stays, handle etc complete all as specified and directed.

S&F Aluminium powder coated single leaf door fixed on pivots alongwith hydraulic door closer door lock , handle,5mm th plane glass fixed with rubber beading in top panel and glazing clips MS clamps and 12mm th laminated particle board in bottom pannel both side laminated) using following sections as given in 'JINDAL' catlogue complete all as specified and as directed. (a) Rectangular tube - 14005 (b) Vertical rail - 19501 (c) Top rail -19503 (d) Middle rail -20060 (e) Bottom rail- 19511

S&F Double action Floor Spring Hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other part made of mild steel heavy duty and fixed complete all as specified and as directed.

S&F Pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair vitreous china wash hand basin, white, 550x 400mm flat back including providing CI brackets, PVC waste pipe 32mm dia, waste coupling 32mm bore of CP incl 15mm bore pillar tap etc all as specified and directed.

S&F in repairs vitreous china, squatting pan, 'Orissa' pattern, size 580 x 440mm white, with integral foot rest, including concrete bedding and PVC flushing cistern 10 Ltr capacity including all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan, 'Pedestal' coloured, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinges devices including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

S&F in repairs stainless steel sink 1.00 thick for kitchen or laboratory with plug, waste pipe, washers including cantilivers cast iron brackets, connecting union etc over all size 495mmx420mm with bowl size 410mmx330mmx160mm complete all as specified and as directed.

S&F in repairs stainless steel, sink with drainboard 1 mm thick for kitchen, with plug, waste pipe, washers incl cantilever CI Brackets, connecting union etc & connecting to inlet/outlet, size of sink 915 x 460 mm overall and bowl size 410mmx355mmx165mm complete all as specified and as directed.

S & F vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe complete all as specified and as directed.

S&F in repairs salt grazed stone ware gully traps, square 150x150 size complete all as specified and as directed.

M&L for Gypsum ceiling board for ceiling prepainted, perforated finish, 600 x 600 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light etc, incl taking down boarding/ceiling of any description, fixed in any position etc with nails, as specified and directed.

S&F for 7 feet pully operated cloths drying system consisting of aluminium pipe of outer dia 22mm, Inner dia 19.80mm, pulleys made up of delrin with rope guide mounted on channel pair of length 24 feet (distance between two pipes is adjustable). Locking system to hide rope knot, channel to be mounted or fixed with self tapping screws provided in kit. Rope will be HDPE double core of 4mm dia fixing to ceiling as specified and directed by Engr-in-Charge and minimum weight of one pipe shall not be less than 0.20 kg/m, minimum weight of rope shall not be less than 7700 Gms/unit (for 04 pipes) Make : Easy dry or equivalent

S&F 'L' angle made of 20mm suqare MS Pipe, powder coated 31 feet with provision for fixing 4 pipes of pull-it system with 4 holes for mounting provided with monting nails all as complete.

Taking down aluminium / copper point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants holder, regulators sockets, light fitting etc removing materials from site and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

Taking down MCB DB / Main switch, old unserviceable / worn out aluminium sub main of any type and size complete all as specified and as directed.

M&L for point wiring using approved colour coding as per IS,with stranded copper conductor 1.5 Sq.mm (Nominal area), single core,PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694, marked in and including heavy duty, PVC casing caping with all accessories etc., heavy duty ISI marked,mild steel concealed sunken boxes, 1.6 mm thick and 60 mm depth with earth dolly duly painted with two coat of black bituminous paint over a coat of red oxide primer with laminated bakelite sheet of min. thickness of 3mm suitable for switches / sockets, etc including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) single core green PVC insulated FRLS cable as earth wire and connecting to earth dolly complete and including cutting and chases in the wall for box and making good of disturbed surfaces incl. colour washing with existing paint complete all as specified for the following:-

One light/fan/ point controlled by one switch.

One 5 Amps Socket outlet point controlled by one switch on independent board.

One 5 amps socket outlet point on same board with other switches

One bell/buzer point controlled by one bell push

M&L for point wiring using approved colour coding as per IS,with stranded copper conductor 2.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked in and including heavy duty, PVC casing caping with all accessories etc., heavy duty ISI marked,with mild steel concealed sunken boxes 1.6 mm thick & 60 mm depth with earth dolly duly painted with two coats of anti corrosive paint over of red oxide primer, internally, covered with laminated bakelite sheet of min. thickness of 3mm sheet suitable for switches, including PVC insulated stranded copper conductor 2.5 Sq.mm (nominal area) single core green PVC insulated cable as earth wire and connecting to earth dolly complete and including cutting and chases in the wall for boxand making good of disturbed surfaces incl. colour washing with existing paint for 15 amps socket outlet point on independent board complete all as specified and as directed.

M&L for point wiring of any length using approved colour coding as per IS,with stranded copper conductor 1.5 Sq.mm(Nominal area),single core,PVC insulated and unsheathed stranded FRLS cable 1100 volts grade,ISI - 694 marked in the existing conduit ,with mild steel concealed sunken boxes with earth dolly with laminated bakelite sheet of min. thickness of 3mm sheet suitable for switches,sockets,etc including PVC insulated stranded copper conductor 1.5 Sq.mm (nominal area) single core green PVC insulated FRLS cable as earth and connecting to earth dolly complete and including cutting and chases in the wall for box and all as specified for the following:- Note:- Making good of disturbed surfaces will be done by contractor without any claims.

One light/fan point controlled by one switch.

One 5 Amps Socket outlet point controlled by one switch on independent board.

One 5 amps socket outlet point on same board with other switches

One bell/buzer point controlled by one bell push.

M&L for point wiring using approved colour coding as per IS,with stranded copper conductor 2.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked drawn through the existing conduit, with mild steel concealed sunken boxes 1.6 mm thick & 60 mm depth with earth dolly duly painted with two coat of black bituminious paint over a coat red oxid primer with laminated bakelite sheet of min. thickness of 3mm sheet suitable for switches,including PVC insulated stranded copper conductor 2.5 Sq.mm (nominal area) single core green PVC insulated FRLS cable as earth and connecting to earth dolly complete and including cutting and chases in the wall for box and making good of disturbed surfaces incl. colour washing with existing paint for 15 Amps socket outlet on independent board complete all as specified and as directed.

M & L for submain wiring complete with two single core 4 Sqmm PVC insulated, unsheathed multi stranded copper conductor FRLS cable, 1100 volts, FR grade in existing conduit, including continuous PVC insulated copper earth wire 4 Sqmm and making good of disturbed surfaces incl. colour washing with existing paint complete all as directed. (Note :- 3 runs of 4 Sqmm conductor and earth wire shall be measured as one unit length.)

M & L for submain wiring complete with two single core 6 Sqmm PVC insulated, unsheathed multi stranded copper conductor FRLS cable, 1100 volts, FR grade in existing conduit, including continuous PVC insulated copper earth wire 6 Sqmm and making good of disturbed surfaces incl. colour washing with existing paint complete all as directed. (Note :- 3 runs of 6 Sqmm conductor and earth wire shall be measured as one unit length.)

M & L for submain wiring complete with two single core 10 Sqmm PVC insulated, unsheathed multi stranded copper conductor FRLS cable, 1100 volts, FR grade in existing conduit, including continuous PVC insulated copper earth wire 10 Sqmm and making good of disturbed surfaces incl. colour washing with existing paint complete all as directed. (Note :- 3 runs of 10 Sqmm conductor and earth wire shall be measured as one unit length.)

M&L for point wiring with 1.5 sqmm PVC insulated copper conductor FRLS cable 1100 Volts grade complete with & including PVC casing and caping and accessories with PVC ISI marked switch board, mounted on surface of walls including continuous PVC insulated copper earth wire 1.5 Sqmm connected to common earth dolly, for the following :-

One light/fan/ point controlled by one switch.

One 5 Amps Socket outlet point controlled by one switch on independent board.

One 5 amps socket outlet point on same board with other switches

One bell/buzer point controlled by one bell push

M & L for point wiring with 2.5 Sqmm copper conductor FRLS cable for 15 amps socket outlet point on independent board and continuous PVC insulated copper earth wire 1.5 Sqmm in PVC casing and capping and including PVC mounted switch board complete all as specified and as directed.

M&L for point wiring using approved colour coding as per IS,with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked, drawn in and including heavy duty, PVC rigid conduits 20 mm or higher dia as reqd at site, totally concealed in walls/floors/ceiling including all conduit accessories/fittings/junction boxes / inspection covers etc; ISI marked and sunk terminal boxes of factory made pressed steel housing, totally concealed in walls suitable for modular switch socket accessories with earth dolly with suitable modular plate etc,including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) single core cable as earth wire and connecting to earth dolly complete and including cutting and chases in the wall for box and making good of disturbed surfaces incl. colour washing with existing paint all as specified for the following :-

One light/fan/ point controlled by one switch.

One 5 Amps Socket outlet point controlled by one switch on independent board.

One 5 amps socket outlet point on same board with other switches

M&L for point wiring using approved colour coding as per IS,with stranded copper conductor 2.5 Sq.mm (Nominal area), single core,PVC insulated and unsheathed stranded FRLS cable 1100 volts grade,ISI - 694 marked drawn through and including heavy duty, PVC rigid conduits 20 mm or higher dia as reqd at site, totally concealed in walls / floors / ceiling including all conduit accessories / fittings / junction boxes / inspection covers etc; ISI marked and sunk terminal boxes of factory made pressed steel housing, totally concealed in walls suitable for modular switch socket accessories with earth dolly with suitable modular plate etc, painted with two coats of anti corrosive paint over of red oxide primer, internally, covered PVC insulated stranded copper conductor 2.5 Sq.mm (nominal area) single core cable as earth and connecting to earth dolly complete and including cutting and chases in the wall for box and all as specified for 15 amps socket outlet point on independent board complete all as specified and as directed.

S&F modular type switch 6A single pole,one way,240 volts, conforming to Cat.No 6730 00 Make-Legrand "Myrius series" or of equivalent specified here-in-after

S&F multipurpose socket outlet 16A -2/3 pin,2 module for 230 volts flush type conforming to cat.No 6730 42 Make-Legrand "Myrius series" or of equivalent specified here-in-after

S&F modular type switch 16A single pole,one way,1 module,240 volts, conforming to Cat.No 6730 00 Make-Legrand "Myrius series" or of equivalent specified here-in-after

S&F modular universal socket 2 module outlet 6 amps 5 pin 230 volts flush type conforming to Legrand :Myrius series" or of equivalent specified here-in-after

S&F in replacement of modular ceiling fan step regulator 100W,2module, electronic step type, suitable for fan 48"/56" sweep complete all as directed (Make-Legrand,"Myrius series" or of equivalent specified here-in-after)

S & F 240 V, 20 amp Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB complete all as specified and as directed.

S&F piano type switch 5 amps single pole,240 volts complete all as specified and as directed.

S&F bell push, flush type,5 amp,240 volts complete all as specified and as directed.

S&F bell electrical ding dong including hard\wood board bell push,flush type,5 amp,240 volts complete all as specified and as directed.

S&F ceiling rose surface type three terminals, 240 volts complete all as specified and as directed.

S&F socket outlet 5 amps 5 pin 230 volts flush type on same board complete all as specified and as directed.

S&F socket outlet multipurpose 2 in 1, 5/15 amps, 230 volts flush type complete all as specified and as directed.

S&F piano type switch 15 amps single pole,240 volts complete all as specified and as directed.

S&F lamp holder (Angle/bracket) insulated body, with back plate for batten fittings with 5 watt LED bulb complete etc. complete all as specified and as directed.

S&F in replacement of ceiling fan regulator two module, electronic step type, delux, suitable for fan 48"/56" sweep complete all as directed

S&F bell push, flush type, 5 amp, 240 volts, ISI marked, Modular type complete all as specified and as directed.

M & L for Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 4 sqmm drawn through and including PVC casing caping and making good of disturbed surfaces incl. colour washing with existing paint complete all as directed by Engineer-in-Charge (Note :- One run of PVC casing caping and 3 runs of 4 Sqmm conductor incl earth wire shall be measured as one unit length.)

M & L for Sub main wiring complete with two single core 6 sqmm, 1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 6 sqmm drawn through and including PVC casing caping and making good of disturbed surfaces incl. colour washing with existing paint complete all as directed by Engineer-in-Charge (Note :- One run of PVC casing caping and 3 runs of 6 Sqmm conductor incl earth wire shall be measured as one unit length.)

M & L for Sub main wiring complete with four single core 6 sqmm ,1100volts grade, PVC insulated, stranded copper conductor FRLS cable with two continuous copper earth conductor of 6 sqmm drawn through and including PVC casing caping and making good of disturbed surfaces incl. colour washing with existing paint complete all as directed by Engineer-in-Charge (Note :- One run of PVC casing caping and 6 runs of 6 Sqmm conductor and earth wire shall be measured as one unit length.)

M & L for Sub main wiring complete with two single core 6 sqmm, 1100volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 6 sqmm in and including PVC conduit for consealed and making good of disturbed surfaces incl. colour washing with existing paint complete all as directed by Engineer-in-Charge. (Note :- One run of PVC conduit and 3 runs of 6 Sqmm conductor and earth wire shall be measured as one unit length.)

M & L for Sub main wiring complete with four single core 6 sqmm and two core of 6.0 sq.mm earth wire, 1100volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor in and including PVC conduit for concealed and making good of disturbed surfaces incl. colour washing with existing paint complete all as specified and as directed. (Note :- One run of PVC conduit and 6 runs of 6 Sqmm conductor incl earth wire shall be measured as one unit length.)

M&L for cutting chases, pinning in making good to facing where required and poinitng in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc.. and making good of disturbed surfaces incl. colour washing with existing paint, cutting not exc 10 cm girth all as specified and directed by engineer in charge.

S&F MCB DB TPN 4 way double door with 200 amps rated busbar 415 V, recess mounted/wall mounted complete all as specified and as directed.

S&F MCB DB SPN 8 way ,double door, with 200 amp rated busbar 240 V,recess mounted complete all as specified and directed.

S&F vertical 4 way TPN double door,recess mounted/wall mounted DB incl one number,MCCB as incomer 3 pole and neutral of 100A rated capacity & 16KA breaking capacity,pre-fitted at factory complete all as specified and directed.

S&F MCB DB SPN 4 way double door with 200 amp rated busbar, 240V recess mounted with common earth dolly all as directed and specified.

S&F MCB SP 6-32amps,10KA,'C' series complete all as specified and as directed.

S&F MCB SPN 10-40 amps,10KA, 240V,'C' series complete all as specified and as directed.

S&F MCB TPN 63 amps ,10KA,415 V,'C' series complete all as specified and as directed.

M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to a depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete (NOTE:-GI earth wire and protection pipe beyond 7.5m will be measured and paid separately)

M & L for fixing earth continuity conductor or main earth lead fixed to wall or buried in ground or drawn in GI pipe with 4 sqmm GI Wire complete all as specified and as directed.

Supplying and fixing LED tube light fitting complete with all fitting and fixing accessories, 1X20 Watt pre-wired with high efficiency electronic driver, glare free, smooth light distribution complete all as specified and as directed.

Supply and fixing Integral LED Security Light Luminaire 30 W comprising of epoxy powder coated aluminium housing, enclosed with glass cover in frame suitable for 50/40 mm GI Pipe (including GI pipe) complete with accessories conforming to Cat Part No : HPLLEDSL3060S of HPL or of equivalent in Wipro / Philips / Havells / Fortune Art all as specified here-in-after including taking down old fitting.

S&F in repairs cable PVC insulated 3 core 4.0 Sqmm with stranded copper conductor 1100V grade complete all as specified and as directed.

S&F in replacement of sleek LED mirror light fitting complete in all respect having high output diffuser of 2 feet length,10 W LED complete all as specified and as directed.

M&L for PVC rectangular block for mounting, switches, sockets, fan regulator etc with cover laminated sheet cover of size 100mmx100mm and 50mm deep including making good of disturbed surfaces incl. colour washing with existing paint complete all as specified and as directed.

All as per Ser. Item No. 190.00 above but 175x100x50 mm deep complete all as specified and as directed.

All as per Ser. Item No. 190.00 above but 200x150x50 mm deep complete all as specified and as directed.

All as per Ser. Item No. 190.00 above but 250x200x50 mm deep complete all as specified and as directed.

All as per Ser. Item No. 190.00 above but 350x300x50 mm deep complete all as specified and as directed.

S&F in repairs bell electrical ding dong 5 amp, ISI Marked 240 volts complete all as specified and as directed.

S&F in repairs ceiling rose surface bakelite, 2 to 3 terminals with base plate complete all as specified and as directed.

S&F in repairs socket outlet 5 amps 5 pin 230 volts flush type on same board complete all as specified and as directed.

S&F in repairs socket outlet multipurpose 2 in 1, 5/15 amps, 230 volts flush type complete all as specified and as directed.

S&F in repairs piano type switch 15 amps single pole, 240 volts complete all as specified and as directed.

S&F in repairs lamp holder (Angle/bracket) insulated body, with back plate for batten fittings with 5 watt LED bulb complete etc.

S&F in repairs of ceiling fan regulator, electronic step type, delux, suitable for fan 48"/56" sweep complete all as directed

S&F in repairs MCB DB TPN 4 way double door with 200 amps rated busbar 415 V, recess mounted/wall mounted all as directed and specified by Engineer in charge.

S&F in repairs MCB DB SPN 8 way ,double door, with 200 amp rated busbar 240 V, recess mounted all as specified and directed by engineer in charge.

M & L for LED pannel Recess mounted -2'x2' - 36 watts light fitting with heat exchanger unit complete including cutting hole of required size in POP/false ceiling making good disturbed including taking dow any type ceiling fitting complete all as specified and as directed. (Make- WIPRO (CRCO10R038HP57GL1) or equivalent of HPL/ /Havells/PHILIPS)

Supply & fix Led tube 5 Watts complete all as specified and directed including taking down existing holder complete all as specified and as directed.

Supply and replace suitable driver for LED down light fitting 18 /20 Watts of the existing make good in a suitable way disturbed area as existed all as specified and directed

M&L for replacement of burnt winding of fans, rewinding complete with super enamelled copper wire of same guage and weight, replacement of insulation paper, varnishing, heating up and testing complete including taking down and refixing the fan at positions to the satisfaction of Engr-in-charge

Ceiling fan 1200/1400mm sweep working on 230 volts AC supply

Exhaust fan upto 300/450 mm sweep working on 230 volts AC supply

Wall mounting fan of any 400/450 mm size,working on 230 volts AC supply

TULSAYA CONSTRUCTION

SARATH ENTERPRISES

M/S VR KRNCH