Construction of Veterinary Dispensary at Dabhota Tehsil Nalagarh Distric Solan HP Deposit work

Amount

Excavation in foundations, trenches etc. in earth work lift up 1.5 meters stacking the excavated soil not more than 3 meters clear from the edge of excavation and than returning the stacked soil in 15 cms layers, when required into plinths, sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth with in 20 meters. (50% Pick+50% Jumper work). including carriage of material in all leads and lifts.

Providing and laying cement concrete 1:6:12 (1Cement: 6 Sand: 12 graded stone aggregate 40mm nominal size) in Foundation & Plinth including carriage of material in all leads and lifts.

Providing form work with steel plates 3.15mm thick welded with angle iron frames 30x30x5mm so as to give a fair finish including centering, shuttering, strutting and propping, etc. with wooden battens and ballies heights of propping and centering below supporting floor to ceiling in all heights and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of material in all leads and lifts.

Flat surfaces such as soffits of suspended floors, roofs , landings and the like up to 200mm thickness

Beams, cantilevers, girders and lintels.Sides and soffits of beams, beam haunching cantilivers, girders, bressumers and lintels upto any depth/height

Edges of slabs and breaks in floors and walls: Under 20 cm. wide.

Vertical surfaces such as wall (any thickness) partition and the like including attached pilasters, buttresses plinth and string courses

Providing and laying cement concrete 1:1.5:3 (1cement :1.5 sand :3 graded stone aggregate 20mm. nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in including carriage of material in all leads and lifts.

Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor two level.

Providing Tor steel /TMT Steel reinforcement for R.C.C. work including bending, binding and placing in position complete including cost of binding wire upto all heights including carriage of material in all leads and lifts.

Brick work using common burnt clay building bricks in foundation and plinth in :- (IInd Class Bricks). in cement mortar 1:4 (1 cement :4 sand) including carriage of material in all leads and lifts.

Brick work using common burnt clay building bricks in Super-structure above plinth level upto floor two level (Second Class Bricks). in CM 1:4 including carriage of material in all leads and lifts.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete. including carriage of material in all leads and lifts.

Boulder filling dry hand packed tightly as in wire crate apron bund (wire crates to be measured separately) including carriage of material in all leads and lifts.

Providing and laying cement concrete 1:4:8 (1Cement: 4 Sand: 8 graded stone aggregate nominal size) excluding cost of form work in Foundation & Plinth including carriage of material in all leads and lifts.

6mm thick cement plaster to ceiling in cement mortar 1:3 (1 cement :3 sand) all modes of transportation in all leads lifts and all incidental charges.

15 mm cement plaster in single coat on rough side of stone walls for interior plastering upto floor two level including arises, Internal rounded angles,chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:4 ( 1 cement : 4 sand) all modes of transportation in all leads lifts and all incidental charges.

15 mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all heights including arises, Internal rounded angles,chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:4 ( 1 cement : 4 sand) all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete

White glazed tiles 6mm thick in skirting riser of steps and dado laid on a bed of 12mm thick cement mortar 1:3 (1 cement :3 sand finished with pointing in white cement. all modes of transportation in all leads lifts and all incidental charges .

Providing and laying granite stone in flooring 20mm(average)thickness base of cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm.thick all modes of transportation in all leads lifts and all incidental charges .

Painting top of roofs with bitumen of approved Quality at 17 kg for 10 sqm. impregnated with a coat of sand at 0.06cum per 10 sqm. Including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil Complete.

With residual type perroleum bitumen of penetration 80/100

Providing & laying mud phuska under tiles terracing on RCC slab roof over bitumen pinted roof mud plaster 3 average thoickness of rammed earth and another earth and another layer of 1 thick mud plaster laid to slope complete.

Providing and laying brick tiles over mumty roofs grouted with cement mortar 1:3 (1 cement :3 sand) over a 12 mm layer of cement mortar 1:3 (1 cement :3 sand ) and finished neat.

Providing angular fillet 7.5x7.5 cm cement concrete 1:2:4 (1cement :2 sand :4 graded stone aggregate 20 mm nominal size

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. sqm. 19.15 31.80 all modes of transportation in all leads lifts and all incidental charges.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of puttyasrequired for making the surface all modes of transportation in all leads lifts and all incidental charges.

Wall finishing with water proofing exterior grade emulsion of approved brand and manufacture and of required shade on un decorated wall surfaces two coat to give an even shade after thoroughly brushing the surface to remove all dirt and dust and mortar droppings and other foreign matters all modes of transportation in all leads lifts and all incidental charges.

Providing woodwork in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position. (2nd class deodar wood)

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws. 40mm thick (2nd class deodar wood.)

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws.40 mm thick (2nd class deodar wood)

Providing and fixing flush door shutters decorative type core of block board construction with frames of first class hard wood and well matched first class indian teak plyveneering with vertical grains or cross bends and face vencering on both faces of shutter. 40mm thick including black enamelled M.S. butt hinges.

Providing and fixing anodized aluminum sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete as per HP.PWD. Specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges . 300 x 16 mm

Providing and fixing anodized Tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etc. Complete as per HP.PWD. Specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges

Providing and fixing aluminum handles anodized transparent or dyed to require colour and shade with necessary screws complete as per HP.PWD. Specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges .

Providing and fixing 100mm bright ,finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete

Providing and fixing oxidized M.S. single acting spring hinges with necessary screws. 150mm all modes of transportation in all leads lifts and all incidental charges .

Providing and fixing bright finished hard drawn hooks and eyes. 150 mm

Providing and fixing 19mm thick water proof commercial board in shelves / box for cup board with butt joints & fixing with nails & screws etc complete)

P/F 12 mm thick prelaminated board both side bwp phenol bonded exterior/interior grade panalled shutters with frame of first class deodar wood for doors including bright finished/black enamelled iron butt hinges with necessary screws 25 mm thick frame including carriage of material in all leads and lifts.

Providing and fixing 12mm thick and 100 mm wide palmet with 25mm diameter wooden curtain rod and brackets including fixing with 25x3mm M.S. flat 10 cm long and plugs etc. complete. 1 st class deodar wood

Providing and fixing chromium plated brass 50mm cup board or wardrobe knobs with nuts complete all modes of transportation in all leads lifts and all incidental charges .

Providing under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick / stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground. all modes of transportation in all leads lifts and all incidental charges.

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominal size) sq.m 21.65 131.60 all modes of transportation in all leads lifts and all incidental charges.

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm in cement mortar 1:6 (1 Cement : 6 Sand) and inside plastring with cement plaster 1:3 (1 Cement:3 Sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1 Cement : 5 Sand : 10 graded stone aggregate) of 40 mm nominal size) and 7.5 cm cement concrete 1:2:4 (1 Cement : 2 Sand : 4 Graded stone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design.

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete. all modes of transportation in all leads lifts and all incidental charges . 150 mm dia pipe

Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete all modes of transportation in all leads lifts and all incidental charges .

PVC Plain bend 150mm dia

PVC shoe 150 mm dia

Providing and fixng to wall ceiling floor galvanised mild steel tubes (Medium grade), tube fittings and clamps (Medium grade) tube fitting and clamps including making good the wall ceiling and floor:-

15mm nominal bore :-

20 mm nominal bore

Providing and laying in trenches galvanised mild steel tubes (Medium grade), tube fittings (Earth work in trenches to be measured and paid for separately)

25 mm nominal bore :-

Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40mm nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of materials within all leads and lifts

Constructing brick masonry chamber for under ground C.I. inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 ( 1 cement: 5 sand) C.I. cover with frame (light duty) 355 mm x610mm internal dia mansions total weight of cover with frame to be not less than 38 kg ( weight of a cover 23 kg. and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) foundation concrete 1:5:10 (1 cement : 5 sand: 10 graded stone aggregate 40mm nominal size) inside plaster 15mm thick with cement mortar 1:3 ( 1cement: 3 sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete (i) inside dimensions 455mm x 610 mm X 450mm deep single pipe line.

Providing and placing PVC water storage tank make SINTEX triple layers with necessary fittings including overflow pipe and scour pipes etc. and ball valve with cover and locking arrangement including providing pads of required sizes for inlet and outlet etc. all modes of transportation in all leads lifts and all incidental charges. 1000 liters

P/F high pressure PVC spigot and socket waste and vantilation pipes ISI marked including fixing with approved adhesive etc. complete within all leads and lift and other incidentials .

150 mm Dia

110 mm Dia

P/F PVC Plain Bend ISI Marked including fixing with approved adhesive etc. complete within all leads and lift and other incidentials .

150 mm Dia

110 mm Dia

P/F PVC single equal branch with access door ISI marked in rubber washer 3 mm thick bolts and nuts complete including fixing with approval adhesive etc. Complete. within all leads and lift and other incidentials .

150 mm Dia

110 mm Dia

P/F high pressure PVC door bend with oval access door in sertion rubber washer 3 mm thick bolt and nuts ISI marked complete including fixing with approval adhesive etc. Complete within all leads and lift and other incidentials .

150 mm Dia

110 mm Dia

P/F PVC Collars ISI Marked including fixing with approved adhesive etc. complete within all leads and lift and other incidentials .

150 mm Dia

110 mm Dia

P/F PVC cowl all modes of transportation in all leads lifts and all incidental charges :-

100 mm (one hundred millimeter) nominal bore

P/F PVC clamps ISI Marked including fixing with approved adhesive etc. complete within all leads and lift and other incidentials .

150 mm Dia

110 mm Dia

Providing & fixing PVC floor trap of self cleaning design i/c cutting and making good the walls and floors all modes of transportation in all leads lifts and all incidental charges.:-

110 mm X 90 mm

Providing and fixing vitreous china wash down water closet (European type WC pan) with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement : one sand) (seat and cover to be measured and paid for separately) all modes of transportation in all leads lifts and all incidental charges.

Anglo Indian (Universal closet)

Providing & fixing CI inlet connection for flush pipe with WC pan all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing plastic seat (solid/ hollow type) and cover for wash down water closet with CP brass hinges and rubber buffers all modes of transportation in all leads lifts and all incidental charges.:- Solid Type

colour plastic seat & cover

Providing and fixing PTMT Coloured /White high density polyethylene / poly propypene 10 litres capacity ( full flush) european standard control low level flushing cistren with fittings such as lead valve,syphon, 15 mm nominal size PVC Ball valve with polythene float, with push burron , coupling for connections with inlet, outlet and over floe pipe, 40 mm dia C.P. Flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet ( overflow pipe to be measurement and paid for separately )

Providing & fixing vitreous china wash basin (white shade) with single hole for pillars with CI or MS brackets painted white including cutting holes and making good the same but excluding fixings all modes of transportation in all leads lifts and all incidental charges.:- Flat back

Providing and fixing Laboratory Sink with C.I. or M.S. Brackets painted white including cutting holes in wall and making good the same but excluding fittings:- Vitreous China ( 600 mm X 450 mm x 250 mm) within all leads and lifts and other incidentials.

Providing & fixing 32mm (thirty two mm) dia rubber plug for sink or wash basin within all leads and lifts and other incidentials.

Providing & fixing dia MI union for wash basin or sink ( 32mm dia. ) within all leads and lifts and other incidentials.

Providing & fixing 32 mm dia PVC waste Pipe for wash basin of sink within all leads and lifts and other incidentials.

Providing & fixing 100 dia sand cast iron grating for gully floor or Nahni trap all modes of transportation in all leads lifts and all incidental charges.

Providing & fixing 600 x 450mm (six hundred into four hundred fifty mm) beveled edge mirror of superior class mounted on 6mm thick AC sheet of plywood sheet fixed with wooden plugs with CP brass screws and washers complete all modes of transportation in all leads lifts and all incidental charges.

Providing & fixing CP brass towel rail with CP brass (heavy duty ISI marked no 8931 & 8934) brackets fixed wooden with all modes of transportation in all leads lifts and all incidental charges.

CP brass 600 x 20mm

Providing & fixing CP brass toilet paper holders :- C P Brass with all modes of transportation in all leads lifts and all incidental charges.

Providing & fixing chromium plated brass soap dish with CP brass brackets fixed to wooden cleats with CP brass screws all modes of transportation in all leads lifts and all incidental charges.

Providing & fixing CP brass bib tap with capstan head all modes of transportation in all leads lifts and all incidental charges.

15 mm dia

Providing & fixing CP brass pillar tap with capstan head all modes of transportation in all leads lifts and all incidental charges.

15 mm dia

P/F CP brass angle valve15 mm without nut and pipe all modes of transportation in all leads lifts and all incidental charges.

Providing & fixing stop cock all modes of transportation in all leads lifts and all incidental charges.

15 mm dia

P/F PVC connection pipe with brass union 300 / 450 mm long all modes of transportation in all leads lifts and all incidental charges.

15 mm nominal bore

P/F brass fullway valve with wheel all modes of transportation in all leads lifts and all incidental charges:-

15 mm nominal bore

20 mm nominal bore

P/F brass ball valve with (Horizontal plunger Type) all modes of transportation in all leads lifts and all incidental charges.:- High pressure with polythene floats:-

20 mm nominal bore

Providing and laying cement concrete 1:2:4 (1 cement:2 sand :4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of centring and shuttering including carriage of material in all leads and lifts.

In Wall of ( Any thickness but not less 0.10 metre thickness ) including attached pilasters, buttresses plinth and string courses

Suspension floors, roofs, landing and shelves and their supports, balconies, beams, girders, bressumers and cantilever upto all floor level.

Brick work using common burnt clay building bricks in foundation and plinth in :-Cement Mortar 1:6 (1 Cement : 6 Sand) Second Class Bricks

Cement concrete flooring 1:2:4 laid in one year finished with a floating coat o neat cement all modes of transportation in all leads lifts and all incidental charges .

Supplying and stacking crushed stone aggregate of following size including carriage of material in all leads and lifts.

25mm Nominal Size

12mm nominal Size

supply cast iron covers without frame for manhole all modes of transportation in all leads lifts and all incidental charges.

(a) For frame of internal dimension 455 mm X 610 mm rectangular CI cover ( light duty single seal pattern ) the weight of cover to be not less than 23 kg. all modes of transportation in all leads lifts and all incidental charges.

Supplying and fixing C.I. Cover 300 X 300 MM With frame for gully trap ( Standard Pattern) the weight of cover to be not less than 4.53 kg.

Providing and laying cement concrete 1:3:6 (1Cement: 3 Sand: 6 graded stone aggregate 20mm nominal size) in Foundation & Plinth including carriage of material in all leads and lifts.

10 mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all heights including arises, Internal rounded angles,chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:3 ( 1 cement : 3 sand) all modes of transportation in all leads lifts and all incidental charges.

Steel work rivetted in built up sections including cutting,hoisting, fixing,in position and applying a priming coat of red lead paint all modes of transportation in all leads lifts and all incidental charges .

Gratings framed guard bars, Ladders, Railing,Brackets and similar work.

Providing & installing sub - missble pump conforming to ISS: 8034 - 1976 along with a directly coupled submersible types squired cage electric induction mortar suitable for operation on 400- VI- Phase 50 C.P.S.A.C supping water lubricated bearing and provding with piroted segment type thrust bearing to with stand non vertical lead with minimum wear and tear and duly fitted with device to take up the expansion of water with heating of motor complete in all respect all modes of transportation in all leads lifts and all incidental charges.

Providing 200mm wide cast iron rungs with chequered or ribbed non surface including fixing in manhole lith 200mm X 200 mm X 100 mm cement concrete 1:3:6 ( with 20 mm nominal size Aggregate all modes of transportation in all leads lifts and all incidental charges.

Providing and laying cement concrete 1:2:4 (1 cement:2 sand :4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of centring and shuttering in:

Foundation and plinth:

Half brick masonry in common burnt clay building bricks in :- Cement Mortar 1:4 (1 cement:4 sand) Second Class Bricks

extra for super structure upto floor two level :

White washing with lime on undecorated wall surfaces two coats to give an even shade including throughly brooming the surface to remove all dirt dust mortar dirt and other foreign matter.

Supply and fixing galvanized steel bar-bed wire (IS:278-1962 Type-I) weighing 9.38 kg per 100 metres (minimum) straining and fixing to any type of standard rails, straining bolts including securing with and provision of galvanized mild steel wire, staples or Steel pins etc. as directed (posts and struts of wood concrete, steel etc. and straining bolts shall be paid for seperately). 100 Metre

Painting two coats on steel based surfaces with readymixed paint brushing to give an even shade including cleaning of all dirt,dust and other foreign atter sand papering and stopping with ready made paint white or other than white.

Earthwork in excavation for structures as per drawing and technical specification clause 305.1 including setting out, consolidation of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 mtrs., dressing of sides and bottom and backfilling in trenches with excavated suitable material. -upto 3.00 mtrs. depth.

Providing and laying concrete for plain/ reinforced concrete in open foundation complete as per drawing and technical specification clause 802,803,1202,1203. -P.C.C grade 1:6:12

Providing and laying concrete for plain/ reinforced concrete in open foundation complete as per drawing and technical specification clause 802,803,1202,1203. -P.C.C grade 1:4:8

providing weep holes in brick masonry /stone masonry, plain reinforced concrete abutment,wing wall, return wall with 100 mm dia PVC pipe extending through full width of structure with slope of 1(v):20 (H) towards the drawing face complete as per technical specification clauses 614,709,1204.3.7

Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification Clause 1204.3.8

ranjit singh

RAMA THAKUR

Jagtar Singh

Mohan Singh Govt. Contractor

Sunil Sharma Govt. Contractor