Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equip

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

TECHNO - COMMERCIAL SHEETS

NOTE* For detailed scope of the work please refer Bid Documents.

BIDDERS TO READ CAREFULLY

THE FOLLOWING DOCUMENTS [DULY SIGNED BY AUTHORISED PERSON, WHEREVER NECESSARY] ARE TO BE UPLOADED AND BANK GUARANTEE/INSURANCE SURETY BOND TOWARDS EMD OVER AND ABOVE RS.1.00LAKH AS PER ANNEXURE-II OF THE BID DOCUMENT SHALL BE SENT IN ORIGINAL TO CHIEF ENGINEER ELECTY., (T&P), KPTCL, BENGALURU SO AS TO REACH THIS OFFICE AFTER THE LAST DATE OF SUBMISSION OF BID AND ON OR BEFORE THE DATE & TIME NOTIFIED FOR OPENING OF TECHNO COMMERCIAL BIDS, FAILING WHICH THE BID WILL NOT BE OPENED. 1) NO DEVIATION CERTIFICATE (SCHEDULE-16). 2) EMD/BID SECURITY AS DETAILED IN CLAUSE NO. 13 of ITT. 3) BANK GUARANTEE issued either by a Nationalized/Scheduled Bank OR INSURANCE SURETY BOND issued by Insurance Company authorized by Insurance Regulatory and Development Authority of India (IRDA) TOWARDS BALANCE EMD/BID SECURITY. (For the balance EMD above Rs. 1.00Lakh) (SCHEDULE-17) - as detailed in Clause No. 13 of ITT-The Bidder shall scan the Bank Guarantee/INSURANCE SURETY BOND towards EMD and upload the same in the prescribed format in the slot specified for “EMD and Tender Fee Payments” in the e-procurement portal to enable the owner for verification of EMD BG/ISB at the time of opening of Techno Commercial Bid, failing which the offer will be rejected. 4) LETTER OF UNDERTAKING (SCHEDULE-18). 5) CONSORTIUM AGREEMENT (IF APPLICABLE-SCHEDULE-19) 6) POWER OF ATTORNEY (SCHEDULE- 20). 7) ANY OTHER AGREEMENTS /UNDERTAKINGS/SELF DECLARATIONS SPECIFIED IN THE TENDER.

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

BID PROPOSAL SHEET

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

Bidder's Name & Address alongwith GSTIN no. :

Bid Proposal Reference :

Person to be contacted :

E-Mail Address:

The Chief Engineer, Electricity,

Tendering & Procurement, KPTCL,

9th Floor, Indhana Bhavana, A.R Circle, Bangalore - 560 009.

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

a) * We have submitted bid as individual Bidder. (Indicate Name of the Individual Bidder)

b) * We have submitted bid in Consortium with the following Bidders. (Key in Consortium) VOID

Name of the Consortium Partner Scope / Participation of each Consortium Partner

(* Fill-up whichever is applicable)

1 We, the undersigned Bidder, having read and examined in detail the specifications and all the Bidding documents of the said work and hereby propose to design, manufacture/fabricate, shop test, supply on FOR site basis, and carry out the erection, testing and commissioning including civil, structural and architectural works for

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

2 PRICES AND VALIDITY :

2.1 We declare that the Prices stated in our Proposal are in accordance with subject Bid Documents (including Clause No.40 of "Conditions of Contract (CC)" & Clause No.12 of Instruction to Tenderers (ITT) of Bid Documents. We further declare that all Ex-works price/CIF components of Spares, Maintenance and Testing Equipments and other charges viz., Freight and Insurance, Type Test charges and other charges stated in our proposal shall be as per the Tender conditions. All the Price and other terms and conditions of this Proposal are valid during the Performance of the Contract.

2.2 All Duties, such as Custom Duties on imports, Levies, Surcharge/Cess etc., if any applicable on the transaction excluding GST are included in the Bid Price and shall be to Our account and the Owner is not having any liability whatsoever on this account, whatever may be the contrary elsewhere in the Bid documents. However the component of Duties included in the Bid Price are separately indicated in Schedule - 2 for TDS purpose. We further confirm that our Bid Prices as quoted in Schedule-I, include all import Duties and levies including Licence fees lawfully payable by us on imported items and all other Duties and Levies applicable on Bought-out Components, Materials, Equipment and other items and confirm that any such Duties and Levies additionally payable shall be to our account. We further confirm that, no Sales Tax in any form shall be payable by Owner either for Bought-out items which are despatched by our Sub-Suppliers directly to the Project Site or for items Supplied directly by us. We confirm that, the Prices quoted by us are excluding GST.

2.3 We declare that we have noted and considered Clause No.39 of Conditions of Contract (CC ), Clause No. 11.11 of Instruction to Tenderers(ITT) of Bid Documents regarding Taxes and Duties and quoted our Prices accordingly. We further agree for TDS as per Statutory stipulations.

2.4 The Bid Prices, the Price components of the various items in our Scope of Supply, Erection including Testing & Commisisoning, Civil and Mandatory spares is quoted in Itemwise Financial Bid (on Percentage Rate Basis) in KPP Portal for this proposal..

3 CONSTRUCTION OF THE CONTRACT : We, declare that we are making the Offer on the basis of Single Contract for the entire Scope of the Package in accordance with Clause No.26.2 of Instruction to Tenderers (ITT) of Bid Document.

4 We having studied Clause No.39 of Conditions of Contract (CC ), Clause No. 11.11 of Instruction to Tenderers(ITT) of Bid Documents , relating to Tax and we hereby, declare that if any income-tax, surcharge on income tax or any other corporate tax is attracted under the law, we agree to pay the same.

5 Bid Security/ EMD : We have enclosed a Bid Security through e-Payment mode for a sum of Rs.1.00Lakh and remaining amount of Rs..........Lakhs ( above Rs.1.00 Lakh) in the form of Insurance Surety Bond (ISB) issued by Insurance Company authorized by Insurance Regulatory and Development Authority of India (IRDAI) OR in the form of Bank Guarantee in original valid for a period of 225 days from last date of bid submission and liable to be forfeited in accordance with Bid Documents. (Mode of Payment towards EMD is as detailed in CLAUSE NO. 13 of ITT & Clause No. 5 of NIT)

We have also ensured that the above Bid Guarantee furnished by us is in line with the Bid Documents and complete in respect of following :

1. Value of Non judicial Stamp Paper purchased in the name of executing Bank is as per Stamp Act.

2. Power of Attorney Number and Date as well as Signature and Full Name and Designation of Executant along with Bank's Stamp are there.

3. Signature, Full Name, Designation and address of Witness are there.

4. Completed Mailing address of the Head Office of the Bank is indicated.

6.1 We declare that the Works shall be performed strictly in accordance with the Specifications and Documents except for the variations and Deviations, all of which have been detailed out exhaustively in the following Schedules, irrespective of whatever has been stated to the contrary anywhere else in our Proposal.

a Commercial Deviations Schedule Schedule - 5

b Technical Deviations Schedule Schedule - 6

6.2 We further confirm that Specified Stipulation of following Clauses are acceptable to us and No Deviation / Exceptions are taken on any account whatsoever in the following Clauses.

a. Terms of payment Clause No. 37 of Section-5,Conditions of Contract (CC) and Clause No.8 of Special Conditions of Contrac (SCC)

b. EMD/Bid Security Clause No. 6, Section :1, Invitation for Tenders (IFT) and Clause No. 13, Section :2, Instruction to Tenderer (ITT)

c. Contract Performance Guarantee Clause No. 29 of Section:2, Instruction to Tenderers (ITT).

d. Penalty for delay Clause No. 41 of Section-5 : Conditions of Contract (CC).

e. Price Basis/ Price adjustment Clause No. 40 of Section-5 :Conditions of Contract (CC).

f. Defects Liability Period/Guarantee Clause No. 10 of Section-5 Special Conditions of Contract (SCC)

g. Work Schedule Clause No.17 of Section:5 Conditions of Contract (CC)

h. Taxes and Duties Clause No. 11.11 of Section-2: Instruction to Tenderers (ITT).

Further, we agree that additional conditions, if any, found in the Proposal Documents other than those stated in Deviation Schedules, save that pertaining to any rebates offered, shall not be given effect to.

7 PERFORMANCE GUARANTEE ; We declare that the ratings and performance figures of the equipment to be supplied and erected by us are guaranteed. The Guaranteed particulas of different equiment in our Scope are enclosed in Data Requirement Sheets.

8 BID PRICING : We further, declare that the Prices stated in our Proposal are in accordance with your ITT & SCC & all other relevant clauses of Bid Documents.

9 PRICE ADJUSTMENT : We declare that the Prices quoted by us are in accordance Clause No. 40 of Section-5 :Conditions of Contract (CC)

10 SPECIAL TOOLS AND TACKLES : We have given a list of Special Tools and Tackles in Schedule - 7 and Prices thereof are included in our lumpsum Bid Price. We further agree that any items of Special Tools and Tackles, though not included in the aforesaid list, but required for effective Erection, Testing, Commissioning & Operation of the Equipments of Substations & Transmission lines shall also be furnished by us, at no extra cost to you.

11 ADDITIONAL INFORMATION : In addition to the information called for in these Proposal Sheets, we have included with this Proposal, additional information as listed in Schedule - 8. We further confirm that such additional information does not imply any additional deviation beyond those covered in Schedule - 5 & 6 and in case of any contraction between these additional information and other provisions of Bid, the later will prevail.

12 QUALIFICATION DATA : We confirm having submitted the Qualification Data, as required by you in your Bid Documents in e-Procurement Portal along with this Proposal. Further we have filled in the information for Qualification Requirements in Schedule 9. In case you require any further information in this regard, We agree to furnish the same in time.

13 WORK SCHEDULE : If this Proposal is accepted by you, we agree to submit Engineering Data, Provide Services and complete the entire Work from time to time, in accordance with Schedules indicated in the Proposal. We fully understand that the Time Schedule stipulated in this Proposal is the essence of the Contract, if awarded. The completion schedule of the various Major Key Phases of the Work is indicated in Schedule - 11.

14 CONTRACT PERFORMANCE GUARANTEE ; We further agree that if our Proposal is accepted, we shall provide an irrecoverable Contract Performance Guarantee, of value equivalent to Five percent (5%) of the Amount Put to Tender (Excluding GST) plus additional security for unbalanced tenders in accordance with Clause 29 of Instructions To Tenderers (ITT) of the tender valid up to the end of ninety (90) days after the end of the Contract Guarantee Period mandatorily in the form of Insurance Surety Bonds (ISBs) issued by Insurance Company authorized by Insurance Regulatory and Development Authority of India (IRDAI) (OR) in the form of electronic Bank Guarantee (e-BG) from the Banks which are integrated with NeSL in the form attached as Annexure-III (Section 4: Formats of Annexures) in your favour in accordance with Clause 25.5 of ITT and Clause 43 of the CC (Conditions of Contract), as per the format given in Section 4 and enter into a formal agreement with you within Twenty (20) days from the date of issue of Letter of Intent to Award the Contract.

15 We, the partners of the Consortium whose Signatures are appended below, shall be liable jointly and severally for the execution of the Contract(s), in the event of Award, in accordance with the terms of Contract(s). The Lead Partner for this Bid - M/s .................................................................................... on behalf of the Consortium, is submitting the Bid. The Power of Attorney in favour of M/s .......................................................................................is enclosed.

16 BID PRICE : We declare that our lumpsum Price for the entire scope of work specified in the specifications and documents, shall be as indicated in Schedule - 1.

17 CHECK LIST : We have included a Checklist duly filled in Schedule 22

18 We, hereby, declare that only the Persons or Firms interested in this Proposal are named herein as Principals and that no other Persons are interested in the Proposal or in the Contract to be entered into, if we are awarded the Contract, and that this proposal is made without any connection with any other Person, Firm or Party likewise submitting a Proposal and that this Proposal is in all respect for and in good faith, without collusion or fraud.

19 We declare, in case our bid is accepted, that until a formal Contract is prepared & executed, this bid together with your written letter of acceptance thereof and your notification of award /Letter of Intent to Award the Contract shall constitute a binding contract between us. We further understand that you are not bound to accept the lowest or any bid you may receive.

Thanking you, we remain,

Yours faithfully,

Place Printed Name

Business Address Country of Incorporation (State or Province to be indicated)

Name and Address Principal Officer

Karnataka Power Transmission Corporation Limited

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

FILL ONLY IN LIGHT BLUE COLOURED CELLS.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer, Electy., Tendering & Procurement, KPTCL, 9th Floor, Indhana Bhavana, A.R Circle, Bangalore - 560009

We declare that in terms of Clause No. 11 of ITT, Bid documents, the following are our lumpsum price in Rupees for the entire scope of work as specified in the Specifications and Documents.( Inclusive of all Taxes (Excluding GST) & Duties).

Total Lumpsum Price : ( In Figures)

Total Lumpsum Price : ( In words)

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 2 (1 of 2)-SUMMARY OF PRICE COMPONENTS

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

FILL ONLY IN LIGHT BLUE COLOURED CELLS.

Summary of Price Components

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer, Electy., Tendering & Procurement, KPTCL, 9th Floor, Indhana Bhavana, A.R Circle, Bangalore - 560009.

Summary price components for identified in accompanying specifications

( Name of the Work) as per the scope identified in accompanying specifications.

Sl no Description Amount in Rs. (Fill as "YES" against the above Price columns in case Prices are indicated in the Price templates)

Construction of Terminal Bays Construction of Transmission Line

A Material / Equipment Price (including Packing & Forwarding charges) in the Scope of the Contractor

Ex-works including all taxes & duties [As per schedules - 3A(i) for TBs & 3B(i) for Line]

ii) Freight and Insurance Charges (Not Applicable) [As per schedules - 3A(i) for Station & 3B(i) for Line]

iii) Total FOR site price (i+ii)

B Mandatory spares price (including packing & forwarding charges)

Ex-works including all taxes & duties(As per schedule - 4)

ii) Freight and Insurance Charges(Not Applicable) (As per schedule -4)

iii)Total FOR site price (i + ii)

C Supply portion total FORD price [A+B]

D Erection portion:

i) Total charges for Erection, Testing & Commissioning of all Supply items [as per schedules-3A(ii) for TBs , 3B(ii) for Line]

ii) Total charges for entire civil works [ as per Schedules-3C(i) for TBs and 3C(ii) for Line]

iii) Total civil works, erection, Testing and commisioning charges (i)+(ii)

E Total Bid Price = C+D(iii) In figures : Rs.

Total Bid Price in Figures : Rs.

Total Bid Price in words : Rupees

Note: The erection charges shall include the charges for taking delivery at Owner's store, unloading, handling, storage, erection, testing and commissioning of all equipments and applicable GST.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 2 ( 2 of 2 ) - TAXES (Excluding GST), DUTIES & OTHER LEVIES

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Fill IN LIGHT BLUE COLOURED CELLS.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer, Electy., Tendering & Procurement, KPTCL 9th Floor, Indhana Bhavana, A.R Circle, Bangalore- 560009.

Estimates of Indian Taxes (Excluding GST), Duties and Levies included in the Total Bid Price are as follows:

SL. No. Description of Applicable Tax (Excluding GST) / Duty / Levy Construction of Terminal Bays Construction of Transmission Line

Rate of Tax (Excluding GST)/ Duty / Levy Amount of Taxes (Excluding GST) / Duties in Rupees Rate of Tax (Excluding GST) / Duty / Levy Amount of Taxes (Excluding GST)/ Duties in Rupees

1 Applicable taxes (Excluding GST), duties & levies prevailing as on the last date of bid submission shall be quoted

i. Supply Portion

ii. Erection Portion

iii. Civil Portion

i. Supply Portion

ii. Erection Portion

iii. Civil Portion

i. Supply Portion

ii. Erection Portion

iii. Civil Portion

6 Building and other construction workers welfare Cess for Supply, Erection and Civil Portion works

8 a. Applicable Customs Duty (*) (Bidders shall also clearly indicate the breakup of Customs duty such as BCD, Cess,etc.,)

b. If there is any existing Treaty between India and the country from where the goods required for this project are proposed to be imported, then copy of the treaty shall be uploaded.

9 Other Taxes & duties if any (Specify) **

10 Other Taxes & duties if any (Specify) **

11 Total (Sum of 1 to 10)

(*) In case of CIF portion of Supply.

** Please Specify the nature of the other Taxes (Excluding GST) along with the details in the "Rate" Column.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 2A : SCHEDULE OF DISCOUNT

SHEET FOR TECHNOCOMMERCIAL OPENING (UN - PRICED)

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

FILL ONLY IN LIGHT BLUE COLOURED CELLS.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer, Electricity, Tendering & procurement, KPTCL, 9th Floor, Indhana Bhavana, A.R Circle, Bangalore - 560009.

We hereby offer an unconditional discount on our quoted price in Schedule 2 (1 of2) as under. Any discounts offered anywere else in Bid shall not be considered.

Sl.No Nature of Discount Construction of Terminal Bays and construction of associated Transmission Lines

Percentage of discount Amount (in Rs.) Remarks

I Supply Schedules

b) Freight & Insurance (Not Applicable)

II Erection Schedules

III Civil Works Schedules

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE- 2 B - STATEMENT OF COMMERCIAL TERMS AND CONDITIONS

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

Details of payments made in the form of Credit card/Debit card/NEFT/RTGS/OTC (over the counter) as per the tender conditions should be keyed in against column no.3 (a) . BG Amount, BG No. and date, Name and address of the bank issuing the BG, validity of the BG should be keyed in against column no. 3 (b) .

FILL ONLY IN LIGHT BLUE COLOURED CELLS.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer, Electy., Tendering & Procurement, KPTCL, 9th Floor, Indhana Bhavana, A.R Circle, Bangalore - 560009.

STATEMENT OF COMMERCIAL TERMS AND CONDITIONS

Sl. No. Particulars Details

1 Bid proposal form Uploaded.

2 No deviation certificate Uploaded.

3. a). EMD / Bid Security Bids shall be accompanied by bid security (EMD); 1) Up to Rs.1.00Lakh The following modes of payment will be provided as a part of e-Payment services. • Credit Card/Debit Card • Net Banking • NEFT/RTGS • Over-the-Counter (OTC) • IMPS For further detail regarding mode of e-payment of EMD in e-procurement platform, contact e-procurement cell, Government of Karnataka.

b). EMD amount above Rs.1.00Lakh by Bank Guarantee/Insurance Surety Bond (ISB)

4 Validity of the Bid.

5 Qualifying Requirements.

6 Financial capability

8 Taxes & Duties.

9 Completion Schedule

10 Defects Liability Period/Guarantee

11 Payment Terms

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 3A(i) - Price Breakup for - Station Supply portion

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

Bidder's Name & Address alongwith GSTIN no. :

The Chief Engineer, Electricity, Tendering & Procurement, KPTCL,9th Floor, Indhavana Bhavana, A.R Circle, Bangalore-560009.

BIDDERS SHALL FILL ONLY IN THE LIGHT BLUE COLOURED CELLS.

Station Supply portion :

Sl No Name of the Equipment/Materials Unit For construction of 66kV TB at existing 66/11kV Haradahalli S/s in Nagamangala Taluk, Mandya District For construction of 66kV TB at existing 66/11kV Vaderahalli S/s in Nagamangala Taluk, Mandya District Total Quantity to be Supplied Indicate whether "Own manufactured Item" or "Bought Out Item"

SS1 CIRCUIT BREAKER : SF-6 Circuit Breaker with spring/semi-pneumatic/ pneumatic type operating mechanism including mounting structure arrangements with rigid bi-metallic terminal connector complete suitable for Drake ACSR conductor / 63mm Al. tube and Mounting Structureas per technical specification 72.5 kV, 2500 A, 40 KA Class SF6 CB i)For 66kV Line Nos 1 1 2

SS2 ISOLATORS : 66 kV, 1250 A, 40 kA double break manually operated isolators with solid core Cylindrical post insulator, terminal connector suitable for Drake ACSR conductor/ 63mm Al. tube, marshalling box etc., complete as per technical specification i)Upright mounting type with Earth switch LPH 4600mm Set 1 1 2

SS3 ii)Upright mounting type without Earth switch LPH 4600mm. Set 1 1 2

SS4 CURRENT TRANSFORMER : Oil filled Current Transformer 0.2s class with rigid bimetalic terminal connector suitable for Drake ACSR conductor/ 63mm Al. tube with marshalling box etc., complete as per technical specification. i)66 kV class, 40 KA, CT of ratio 600-400 / 1-1-1A for Transmission Lines. For metering : Accuracy 0.2s, Burden 10 VA For backup protetion : Accuracy 5P20. Burden 30 VA For differential /Distance protection PS class,Vk-1100V at 600/1A, Rct 5ohm at 600/1A Nos 3 3 6

SS5 Lightning Arrestors SURGE ARRESTOR (Porcelain Housing) metal oxide, Gapless type, as per Technical Specification: i)60 kV, 10KA Metal Oxide with surge counter Arrestor class : Discharge Class 3 (Station Medium Duty (SM)- for overhead lines Nos 3 3 6

SS6 Control and Relay Panel: Simplex 110 V DC compatible to SCADA complete as per technical specification Note: 1. All the C&R Panels and associated panels shall be of one and the same make for uniformity and interchangeability of Components. 2. Accuracy class of metering core of CTs and also trivector meter of control & relay panels shall be 0.2s class and VTs shall be 0.2 Class instead of that specified elsewhere in the respective clauses of Technical Specification of bidding documents 3. The electronic Tri-vector meter of 0.2s accuracy class with ABT & TOD features, DLMS compliant has to be provided both on HV and LV side of C&R Panel. 4.All numerical relays shall conform to IEC Protocol as per technical specification. i)For 66 kV Transmission Line Nos 1 1 2

Station Structure A) 66 kV Station Structure fabricated out of galvanised mild steel excluding Bolt & nuts. i)Station Beams type 6B1 (with 7.6m bay Width) (0.42655 t per structure) No/t 1 / 0.42655 1 / 0.42655

B)MOUNTING STRUCTURES :(Lattice type) excluding Bolt & nuts. i)Isolators Live point height 4600mm With / Without Earth Switch (0.726 t per Structure) No/t 2 / 1.452 2 / 1.452

ii)Current transformers (0.146 t per Structure) No/t 3 / 0.438 3 / 0.438

iii)Lightening arrestors (0.105 t MT per structure) No/t 3 / 0.315 3 / 0.315

vii) Pedestal insulators (for bus) (0.127 t per structure) No/t 3 / 0.381 3 / 0.381

SS7 Fabrication, galvanising and supply of Mild Steel of Station structures and Mounting Structures (excluding Bolts & nuts)-Total Weight Note:(i) Rate to be quoted on per t Basis. t 3.0126 3.0126 6.0251

Supply of Bolts & nuts for Station structures and Mounting Structures A)66kV Station Structure i)Station Beams type 1B1 with 8.2m bay Width (0.032 t per structure) No/t 1 / 0.02245 1 / 0.02245

B)MOUNTING STRUCTURES i)Isolators Live point height 4600mm With/Without Earth Switch (0.026 t per Structure) No/t 2 / 0.052 2 / 0.052

ii)Current transformers 66 kV (0.012 t per Structure) No/t 3 / 0.036 3 / 0.036

iii)Lightening arrestors (0.011 t per structure) No/t 3 / 0.033 3 / 0.033

iv) Pedestal insulators (for bus) (0.013 t per structure) No/t 3 / 0.039 3 / 0.039

SS8 Supply of galvanised Bolts & Nuts for Station structures and Mounting Structures -Total Weight Note:(i) Rate to be quoted on per t Basis. t 0.18245 0.18245 0.36490

SS9 BUS BAR FORMATION : Drake ACSR Km 0.05 0.05 0.10

SS10 INSULATORS: i) Post insulators- Cylindrical solid core as per technical Specification Solid Core Bus Post Insulator 66 kV class, 1Unit/stack. Nos 3 3 6

SS11 HARDWARES : 1.C Type wedge connector suitable for Drake-Drake Nos 3 3 6

SS12 2.C Type wedge connector suitable for Drake-Panther Nos 6 6 12

SS13 Copper control cables: 1.1kV class PVC insulated Copper Control Cable with Lugs / Ferrules, Glands as per technical specificaions i) 19 Core x 2.5 Sq.mm. Mtr 260 250 510

SS14 ii) 4 Core x 6.0 Sq.mm. Mtr 750 750 1500

SS15 iii) 4 Core x 2.5 Sq.mm. Mtr 750 750 1500

SS16 iv) 2 Core x 2.5 Sq.mm. Mtr 250 250 500

SS17 v) 2 Core x 6 Sq.mm. Mtr 100 100 200

SS18 Equipments required for establing SCADA Communication as per KPTCL Specification Note:1. Satellite communication required will be arranged by SLDC SCADA Cables: i)Current Cables - copper core with c/s 4.0sqmm multistrand 4 core Mtr 40 40 80

SS19 ii)Voltage Cables-Copper core with c/s 2.5sqmm multistrand 4core Mtr 40 40 80

SS20 iii) Signal cables- armoured copper core with c/s 0.5sqmm multistrand 10core Mtr 50 50 100

SS21 iv)Control cables - copper core with c/s 1.5sqmm multistrand 10core Mtr 50 50 100

NOTE 1. Any clarifications / hard copy of drawings can be obtained from the office of the Chief Engineer Electricity, Tendering & Procurement, KPTCL,9th Floor, Indhavana Bhavan, A.R Circle, Bangalore.

2. Spacers shall be provided wherever necessary and no extra charges is payable on account of the same.

3. Supply of equipment/materials and the Erection charges shall include loading and unloading.

4. Copper Flat and GI Flat required for Power Transformers (if supply is in Bidder's scope) shall be supplied alongwith the Transformers and no extra cost is payable on this account.

5. The Bidder shall take necessary action to ensure that all the materials supplied shall be properly housed to ensure satisfactory commissioning.

6. The prices for all the materials shall be quoted in Itemwise Finanacial bid (on Percentage Rate Basis).

7. Released materials shall be transported to the nearest Major Works Store of KPTCL without any additional cost as per the directions of the Engineer in charge of the work.

8. The Bidder shall clearly indicate whether the materials/equipments are “Own manufactured” or “Bought out item”.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 3A(ii) - Price Breakup for - Station Erection portion including Testing and Commissioning.

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

Bidder's Name & Address alongwith GSTIN no. :

The Chief Engineer, Electricity, Tendering & Procurement, KPTCL,9th Floor, Indhavana Bhavana, A.R Circle, Bangalore-560009.

BIDDERS SHALL FILL ONLY IN THE LIGHT BLUE COLOURED CELLS.

Station Erection portion including Testing and Commissioning:

Sl No Name of the Equipment/Materials Unit Quantity to be Errected for construction of 66kV TB at existing 66/11kV Haradahalli S/s in Nagamangala Taluk, Mandya District Quantity to be Errected for construction of 66kV TB at existing 66/11kV Vaderahalli S/s in Nagamangala Taluk, Mandya District Total Quantity to be Errected

SE1 CIRCUIT BREAKER : SF-6 Circuit Breaker with spring/semi-pneumatic/ pneumatic type operating mechanism including mounting structure arrangements with rigid bi-metallic terminal connector complete suitable for Drake ACSR conductor / 63mm Al. tube and Mounting Structureas per technical specification 72.5 kV, 2500 A, 40 KA Class SF6 CB i)For 66kV Line Nos 1 1 2

SE2 ISOLATORS : 66 kV, 1250 A, 40 kA double break manually operated isolators with solid core Cylindrical post insulator, terminal connector suitable for Drake ACSR conductor/ 63mm Al. tube, marshalling box etc., complete as per technical specification i)Upright mounting type with Earth switch LPH 4600mm Set 1 1 2

SE3 ii)Upright mounting type without Earth switch LPH 4600mm. Set 1 1 2

SE4 CURRENT TRANSFORMER : Oil filled Current Transformer 0.2s class with rigid bimetalic terminal connector suitable for Drake ACSR conductor/ 63mm Al. tube with marshalling box etc., complete as per technical specification. i)66 kV class, 40 KA, CT of ratio 600-400 / 1-1-1A for Transmission Lines. For metering : Accuracy 0.2s, Burden 10 VA For backup protetion : Accuracy 5P20. Burden 30 VA For differential /Distance protection PS class,Vk-1100V at 600/1A, Rct 5ohm at 600/1A Nos 3 3 6

SE5 SURGE ARRESTOR (Porcelain Housing) metal oxide, Gapless type, as per Technical Specification: i)60 kV, 10KA Metal Oxide with surge counter Arrestor class : Discharge Class 3 (Station Medium Duty (SM))- for overhead lines Nos 3 3 6

SE6 Control and Relay Panel: Simplex 110 V DC compatible to SCADA complete as per technical specification Note: 1. All the C&R Panels and associated panels shall be of one and the same make for uniformity and interchangeability of Components. 2. Accuracy class of metering core of CTs and also trivector meter of control & relay panels shall be 0.2s class and VTs shall be 0.2 Class instead of that specified elsewhere in the respective clauses of Technical Specification of bidding documents 3. The electronic Tri-vector meter of 0.2s accuracy class with ABT & TOD features, DLMS compliant has to be provided both on HV and LV side of C&R Panel. 4.All numerical relays shall conform to IEC Protocol as per technical specification. i)For 66 kV Transmission Line Nos 1 1 2

Station Structure A) 66 kV Station Structure fabricated out of galvanised mild steel including Bolt & nuts. i)Station Beams type 6B1 suitable for 7.6m bay Width (0.449 t per structure) No/t 1 / 0.449 1 / 0.449

B)MOUNTING STRUCTURES :(Lattice type) including Bolt & nuts. i)Isolators Live point height 4600mm With / Without Earth Switch (0.752 t per Structure) No/t 2 / 1.504 2 / 1.504

ii)Current transformers (0.158 t per Structure) No/t 3 / 0.474 3 / 0.474

iii)Lightening arrestors (0.116 t MT per structure) No/t 3 / 0.348 3 / 0.348

iv) Pedestal insulators (for bus) (0.140 t per structure) No/t 3 / 0.42 3 / 0.42

SE7 Erection of Station structure, Mounting Structures (including Bolts & nuts) as per the directions of site Engineer -Total Weight Note:(i) Rate to be quoted on per t Basis t 3.195 3.195 6.390

SE8 Formation of Main/ Cross Bus with Single Drake for 66 kV Bay Note: Shall include Installing insulator strings complete with necessary Hardwares, stringing of the conductor etc., Nos 1 1 2

SE9 INSULATORS: i) Post insulators- Cylindrical solid core as per technical Specification Solid Core Bus Post Insulator 66 kV class, 1Unit/stack. Nos 3 3 6

SE10 Laying of 1.1kV class PVC insulated Copper Control Cable with Lugs / Ferrules, Glands as per specificaions i) 19 Core x 2.5 Sq.mm. Mtr 260 250 510

SE11 ii) 4 Core x 6.0 Sq.mm. Mtr 750 750 1500

SE12 iii) 4 Core x 2.5 Sq.mm. Mtr 750 750 1500

SE13 iv) 2 Core x 2.5 Sq.mm. Mtr 250 250 500

SE14 vi) 2 Core x 6 Sq.mm. Mtr 100 100 200

SE15 Laying of Scada Cable along with glands/lugs/ferrules : i)Current Cables - copper core with c/s 4.0sqmm multistrand 4 core Mtr 40 40 80

SE16 ii)Voltage Cables-Copper core with c/s 2.5sqmm multistrand 4core Mtr 40 40 80

SE17 iii) Signal cables- armoured copper core with c/s 0.5sqmm multistrand 10core Mtr 50 50 100

SE18 iv)Control cables - copper core with c/s 1.5sqmm multistrand 10core Mtr 50 50 100

SE19 Integration of RTU, DCU and UPS with field equipments Nos 1 1 2

SE20 Earth mat formation: Supplying and Grounding of Equipment with G.I.Flat 50X6mm and connecting Equipment to the earth mat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and connecting by welding (inclusive of T&P and consumables) to the earthmat/Ground pit / point of earth connection.(All materials to be supplied by the contractor) m 216 171 387

SE21 Supply and erection of Grounding of equipment by providing cast iron pipe of 100 mm ID 13 mm thickness, 2.75 metre long with 2 part clamp out of G.I. Flat 50X6 mm continuously welded alround the pipe using cast iron welding electrodes as per drawing including the cost of excavation (All materials to be supplied by the contractor) Nos 3 3 6

SE22 Supplying & providing 450 mm dia 450 mm height 1.5" to 2" thick hume pipe collar (nonpressure type) for earth pits including all lead and lifts etc., Nos 3 3 6

1. Any clarifications / hard copy of drawings can be obtained from the office of the Chief Engineer Electricity, Tendering & Procurement, KPTCL,9th Floor, Indhavana Bhavan, A.R Circle, Bangalore.

2. Released materials shall be transported to the nearest Major Works Store of KPTCL without any additional cost as per the directions of the Engineer in charge of the work.

3. The Erection charges shall include transportaion to site, loading and unloading.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 3BI(i) - Price Breakup for - Line Supply portion

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

Bidder's Name & Address alongwith GSTIN no. :

The Chief Engineer, Electricity, Tendering & Procurement, KPTCL, 9th Floor, Indhavana Bhavana, A.R Circle, Bangalore. - 560009.

BIDDERS SHALL FILL ONLY IN THE LIGHT BLUE COLOURED CELLS.

LINE SUPPLY PORTION :

Sl.No Name of the Equipment/Mataerials Unit Unit wt of Tower Total Quantity Indicate whether "Own manufactured Item" or "Bought Out Item"

No of Towers Unit wt of Tower in t Total wt of Tower in t

1 I. Fabrication, Prototype Inspection and Supply of galvanised 110KV NARROW BASED DC Transmission Line Towers (Design Code:KPTCL-1D-NB)

A) TOWER TYPE 'A'

a) Normal Tower Type 'A' No/t of MS 16 2.8129 45.0070

b)3M Extension to Tower Type 'A' No/t of MS 3 0.4220 1.2661

c)6M Extension to Tower Type 'A' No/t of MS 13 0.8169 10.6203

d) Stubs for Tower Type 'A' No/t of MS 16 0.2010 3.2160

B) TOWER TYPE 'C'

a) Normal Tower Type 'C' No/t of MS 19 4.8690 92.5102

b)3M Extension to Tower Type 'C' No/t of MS 7 0.7727 5.4087

c)6M Extension to Tower Type 'C' No/t of MS 12 1.5174 18.2084

d) Stubs for Tower Type 'C' No/t of MS 19 0.5028 9.5536

C) TOWER TYPE 'D'

a) Normal Tower Type 'D' No/t of MS 15 6.2970 94.4550

b) 3M Extension to Tower Type 'D' No/t of MS 4 0.9830 3.9320

b) 6M Extension to Tower Type 'D' No/t of MS 7 1.8918 13.2423

c)9M Extension to Tower Type 'D' No/t of MS 4 3.4741 13.8963

d) Stubs for Tower Type 'D' Normal, 3M extension & 6M Extension No/t of MS 11 0.6103 6.7132

e) Stubs for Tower Type 'D' for 9M Extension No/t of MS 4 0.7450 2.9800

LS1 Fabrication, Prototype Inspection and Supply of galvanised Transmission Line Towers -Grand Total weight of Tower parts- Mild Steel Note:(i) Rate to be quoted on per t Basis. t 50 321.0091 321.0091

I. Supply of Bolt & Nuts for 110KV NARROW BASED DC Transmission Line Towers (Design Code:KPTCL-1D-NB)

A) TOWER TYPE 'A' with stubs

a) Normal Tower Type 'A' No/t of MS 16 0.2072 3.3152

b)3M Extension to Tower Type 'A' No/t of MS 3 0.0197 0.0592

c)6M Extension to Tower Type 'A' No/t of MS 13 0.0362 0.4706

B) TOWER TYPE 'C'

a) Normal Tower Type 'C' with stubs No/t of MS 19 0.2840 5.3960

b)3M Extension to Tower Type 'C' No/t of MS 7 0.0375 0.2625

c)6M Extension to Tower Type 'C' No/t of MS 12 0.0712 0.8544

C) TOWER TYPE 'D'

a) Normal Tower Type 'D' with stubs No/t of MS 15 0.2485 3.7271

b) 3M Extension to Tower Type 'D' No/t of MS 4 0.0230 0.0920

b) 6M Extension to Tower Type 'D' No/t of MS 7 0.0713 0.4990

c)9M Extension to Tower Type 'D' No/t of MS 4 0.1312 0.5249

LS2 Supply of Bolt & Nuts for Transmission Line Towers Grand -Total weight of Bolts & Nuts Note:(i) Rate to be quoted on per t Basis t 50 15.2008 15.2008

LS3 Tower Accessories 1.Number Plates Nos 50

LS4 2.Danger Boards Nos 50

LS5 3.Circuit Plate Set 50

LS6 4.Phase Plate (set of 3 Nos.) Nos 50

LS7 5.Earth bond of 300mm Long Nos 16

LS8 6.Earth bond of 450mm Long Nos 34

LS9 ACSR Conductor i) Panther ACSR Km 38.930

LS10 Ground wire i) 7/3.15mm Ground Wire Km 12.977

LS11 ii) 7/3.15mm Ground Wire (For earthing of anchor towers to be run from top to bottom of tower) Km 0.51

LS12 Insulator Strings suitable for Panther Conductor as per Technical specification (For 110kV Transmission line): NOTE: All the Insulator strings quoted by the bidder shall be of the same type i.e. all the Insulator strings shall be of Disc Insulators type OR all the Insulator strings shall be of Polymeric Composite Insulators type OR all the Insulator strings shall be of Long rod insulator. Bidder shall quote either for Disc Insulators type OR for Composite Insulators type OR for Long rod insulator and not for all the types. A. Tension insulator strings consisting of any one of the following: a. Tension Insulator string consisting of 1X8nos. of 110kV, 90kN Disc insulators OR b.Tension insulator strings using Porcelain long rod insulator string equivalent to 1X8nos. of 110kV,90kN Disc insulators (Sectional length- as per technical specification) OR c. Tension insulator strings using single unit of 110kV, 90kN Silicon Rubber composite insulator equivalent to 1X8nos. of 110kV,90kN Disc insulators (Sectional length- as per technical specification) strings 222

LS13 Insulator Strings suitable for Panther Conductor as per Technical specification (For 110kV Transmission line): B) Suspension insulator strings consisting of any one of the following: a) Suspension Insulator string consisting of 1X7nos. of 110kV, 90KN Disc insulators OR b) Suspension Insulator string using Porcelain long rod insulator string equivalent to 1X7nos. of 110kV, 90KN Disc insulators (Sectional length- as per technical specification) OR c)Suspension Insulator string using single unit of Silicon Rubber composite insulator equivalent to 1X7nos. of 110kV,90kN Disc insulators (Sectional length- as per technical specification) strings 48

LS14 PILOT INSULATOR STRINGS suitable for Panther Conductor as per Technical specification (For 110kV Transmission line): C.Pilot insulator strings consisting of any one of the following: a.Pilot Insulator string consisting of 1X7nos. of 110kV, 90kN Disc insulators OR b.Pilot Insulator string using Porcelain long rod insulator string equivalent to 1x7nos. of 110kV, 90kN Disc insulators (sectional length-580mm) OR c. Pilot Insulator string using Single unit of 110kV, 90kN Silicon rubber composite insulator string equivalent to 1x4nos. of 110kV, 90kN Disc insulators (Sectional length- as per technical specification) strings 24

LS15 Insulator Hardware: A.Single Tension Clamp with hardware and arcing horn suitable for Panther ACSR Set 186

LS16 B.Double Tension clamp with hard ware and arcing horn suitable for Panther ACSR Set 18

LS17 C. Single suspension Clamp with hardware and arcing horn suitable for Panther ACSR Set 48

LS18 D. Single suspension Clamp with hardware and arcing horn suitable for Panther ACSR for Pilot insulator string Set 24

LS19 Accessories for Panther Conductor: 1.M S C Joints for Panther Conductor Nos 40

LS20 2.Repair sleeves for Panther Conductor Nos 40

LS21 3.P G Clamps for Panther Conductor Nos 204

LS22 4.Vibration dampers for Panther Conductor Nos 300

LS23 5.Pre formed armour rods for Panther Conductor Nos 72

LS24 Accessories for 7/3.15mm Earthwire: 1.M S C Joints for 7/3.15mm Earth Conductor Nos 20

LS25 2.Repair sleeves for 7/3.15mm Earth Conductor Nos 20

LS26 3.P G Clamps for 7/3.15mm Earth Conductor Nos 34

LS27 4.Single tension clamps (Bolted type) for 7/3.15mm Earth Conductor Nos 68

LS28 5.Single Suspension clamps (Bolted type) for 7/3.15mm Earth Conductor Nos 16

NOTE: 1. Any clarifications / hard copy of drawings can be obtained from the office of the Chief Engineer Electricity, Tendering & Procurement, KPTCL,9th Floor, Indhavana Bhavan, A.R Circle, Bangalore.

2. Spacers shall be provided wherever necessary and no extra charges is payable on account of the same by KPTCL.

3. Supply of equipment/materials shall include transportation to the site, loading and unloading.

4. The Bidders shall start the line work from both the ends simultaneously by deploying more number of gangs as the ‘ROW’ issues which may crop-up can be addressed in parallel on both segments. The bidders shall take note of the same before quoting.

5. The Bidder shall take necessary action to ensure that all the materials supplied shall be properly housed to ensure satisfactory commissioning.

6. The prices for all the materials shall be quoted in Itemwise Finanacial bid (on Percentage Rate Basis).

7. The Bidder shall clearly indicate whether the materials/equipments are “Own manufactured” or “Bought out item”.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 3BI(ii) - Price Breakup for -Line Erection portion including Dismantling

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

Bidder's Name & Address alongwith GSTIN no. :

The Chief Engineer, Electricity, Tendering & Procurement, KPTCL, 9th Floor, Indhavana Bhavana, A.R Circle, Bangalore- 560009.

BIDDERS SHALL FILL ONLY IN THE LIGHT BLUE COLOURED CELLS.

LINE ERECTION PORTION INCLUDING DISMANTLING:

Sl.No Name of the Equipment/Mataerials Unit Total Quantity to be Errected

LE1 Check survey to be conducted during construction stage: Conducting detailed check survey along the approved route duly following the route alignment, GPS Co-ordinates, submission of detailed line schedule, tower schedule, land schedule and comparing the same with respect to detailed survey report, bringing out the differences if any. Submission of contour maps for undulated/hilly tower. The work also includes marking corridor width in the field and computing the quantum of benching and revetment, preparation of detailed land schedule along the corridor on the digitized Revenue village maps indicating the Sy. Nos. falling within the corridor for the purpose of estimation of the land compensation, submission of detailed consolidated hard copy of reports of check survey in 6 sets along with soft copy for approval in all types of terrain per km. 66kV Line &Plain Terrain Km 12.7850

LE2 Conducting drone survey of Transmission lines for collection of data along with Aerial inspection of EHV line corridor using LIDAR method for measurements of vertical,horizontal and ground clearnace of the LT/HT/EHV/P&T lines, major roads/railway/river crossing/buildings, vegetations, etc., which is found to cross or running in parallel with the KPTCL exisiting EHV lines and sag measurements and other works The quoted rates shall include the collection of following details: a) Vegetation growth close to conductor along the width of corridor with measurements b)Building/construction violation along the corridor with measurements c)Clearance measurement of Roads/Railways. River crossings d)Clearance measurement of EHV/Power line crossing (up and down) e)Clearance measurements of tower elements (Hang point & Ground point measurement) f)Sag measurement of each span of the line all phases g)Location of tower (GPS coordinates), type of tower, height of tower, span length and conductor type h)Angle of deviation of tower i)Submission of detailed consolidated final report for surveying work done appending all the above details including all relevant information collected during survey, certificates of the instruments used for the work, photos/videos taken at site and submitting soft copies and hard copy of all documents & reports in 3 sets. Note: 1) The minimum requirement of LiDAR camera is point cloud with RGB mapping Accuracy of +/-25cm ability to gather minimum of 75 points/sqmtr. 2) Minimum 1 km length shall be considered for payment. 3) Patrolling shall at least cover the minimum corridor area as per the voltage classes. Km 12.7850

LE3 Installing insulator strings complete with necessary Hardwares, Installing and stringing of conductor/Earthwire including fixing of their accessories, etc., a. Panther ACSR conductor-66kV Km 38.3550

LE4 b. Earth wire-7/3.15mm Km 13.2950

Erection of 110kV Transmision Line Towers : Sorting of tower parts (made of fabricated angle iron) t 321.0091

Setting up of stub templates & aligning dismantling & transportation of templates from one location to another - for 110kV per locn. 50

Assembling & Erection of towers including tightening of bolts & nuts including loading, unloading at stores & site (including weight of stubs) t 336.2099

Tack welding of bolts & nuts nos. 12500

Fixing Tower accessories: Number plates Nos. 50

Danger Boards Nos. 50

Circuit plates Nos. 50

Phase plates RYB (3 Nos. per set) Set 50

LE5 Erection of 110kV Transmision Line Towers (including tower accessories,etc., except GI angle with Barbed wire & Grounding materials) Note: (i)The Bidders are required to quote the rates taking in to consideration of the charges for sorting of towers, loading, unloading, stub setting, aligning,fixing of tower accessories,etc., except GI angle with Barbed wire & Grounding materials, dismantling & transportation of templates from one location to another and tack welding. (ii)Rate to be quoted on per t Basis. (iii) Refer Line Supply Portion for detailed Break up qty. t 336.2099

LE6 Tower accessories: a. Supplying and fixing GI angle 45 x 45 X 5mm, 1Mtr length with cleats, bolts nuts as per specification and fixing above 0.5mtr length each at inner and outer surface of tower to facilitate running of barbed wire Set 50

LE7 Supplying and fixing Barbed wire as per technical specifications m 4633.472

LE8 c.Grounding of towers including cost of 40 mm dia 2.5 mm thick,class 'C' G.I. Pipe of 3 metres length as per specification with 50 X 6 mm GI Flats 3 metrelong, salt, charcoal, including excavation charges Set 50

LE9 Dismantling of Existing super structure / tower material and despatching to the nearest KPTCL stores. Note : 1) The rates quoted for releasing shall also include the charges for loading, transportation to KPTCL stores and unloading . 2) Before Commencing the dismantling Work, Items wise Inventory of the Equipments / Materials to be Dismantled are to be prepared jointly with the Engineer In-Charge, which is to be got approved by the respective SEE Transmission (Projects) Circle. a) 66kV DC-A+0 (KPTCL-6D-OLDKLP) Type Tower-1No. t 0.970

NOTE: 1. Any clarifications / hard copy of drawings can be obtained from the office of the Chief Engineer Electricity,Tendering & Procurement, KPTCL,9th Floor, Indhavana Bhavan, A.R Circle, Bangalore.

2. The Erection charges shall include transportaion to site, loading and unloading.

3. Bidders shall start the line work from both the ends simultaneously by deploying more number of gangs as the ‘ROW’ issues which may crop-up can be addressed in parallel on both segments. The bidders shall take note of the same before quoting.

4. The charges for erection shall be quoted in the Itemwise Finanacial bid (on Percentage Rate Basis).

5. Released materials shall be transported to the nearest KPTCL Projects Division Stores without any additional cost as per the directions of the Engineer in charge of the work.

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 3C(i) - Price Breakup for -Station Civil Portion

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

Bidders Name and Address along with GSTIN No.: To

The Chief Engineer, Electy., Tendering & Procurement, KPTCL,9th Floor, Indhavana Bhavana, A.R Circle, Bangalore. - 560009.

Sl. No. Specifications Unit Quantity Total Quantity

TB at Haradanahalli S/s TB at Vaderahalli S/s

B1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m cum 253.94 253.94 507.88

B2 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. cum 196.07 196.07 392.14

B3 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates cum 4.98 4.98 9.96

B4 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - For foundation (3% cosidered for Form work) cum 21.47 21.47 42.94

B5 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20mm nominal size graded crushed coarse aggregate- ( 35% considered for Form work) cum 9.97 9.97 19.94

B6 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification All other type of structures kg 1654.06 1654.06 3308.12

B7 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: PVC pipes 32mm dia, 10 kg/sqcm & class 5 m 25 25 50

B8 Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. kg 702 702 1404

B9 Removal, stacking and respreading of existing jelly as per the directions of the engineer in charge of the work including all costs labour, loading, unloading, transportation etc., complete and any other items not mentioned herein but required for the completion of work sqm 200 200 400

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 3C(ii) - Price Breakup for -Line Civil Portion

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

Bidders Name and Address along with GSTIN No.: To

The Chief Engineer, Electy., Tendering & Procurement, KPTCL,9th Floor, Indhavana Bhavana, A.R Circle, Bangalore. - 560009.

Sl. No. Specifications Unit Quantity

C1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m Cum 330.41

C2 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils upto 3.0 m depth with 5% de-watering is assessed as per site condition Cum 3406.32

C3 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights,including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth. Cum 644.3

C4 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights,including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In ordinary/soft rock without blasting Depth exceeding 1.5 m but not exceeding 3 m depth Cum 787.47

C5 Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including cost of explosives, dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, blasting materials, tools, usage of Machinery & all other appurtenaces required to complete the work. In Hard Rock (requiring blasting) Depth upto 1.50m Cum 198.24

C6 Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including cost of explosives, dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, blasting materials, tools, usage of Machinery & all other appurtenaces required to complete the work. In Hard Rock ( requiring blasting) Depth exceeding 1.5 m, but not exceeding 3 m Cum 242.3

C7 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Cum 98.71

C8 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For foundation Cum 1419.88

C9 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification All other type of structures Kg 65001.68

C10 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 4090.45

The Design shall be safe against all anticipated/possible forces and pressures. All necessary checks for the stability of the structure shall be carried out.

Place Designation

Name of the company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 4A Price Break up for MANDATORY SPARES -STATION SUPPLY PORTION

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer, Electy., Tendering & Procurement, KPTCL,9th Floor, Indhavana Bhavana, A.R Circle, Bangalore-560009.

BIDDERS SHALL NOTE: PLEASE FILL ONLY IN THE LIGHT BLUE COLOURED CELLS.

STATION MANDATORY SPARES PORTION

Place Designation

Date Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-5 COMMERCIAL DEVIATION

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

Please fill Only in the Light Blue Couloured Cell.

Please key in the SlNo.,Section , Clause , Description as given in bid sheets and finally your Statement of Deviation/Variations.

This Sheet would be opened at the Techno-Commercial Opening. Please refer Vendor Manual attached for further details.

For any further assistance for submitting your bids please call up KPTCL Office.

We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)

We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)

We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)

If you are not deviating from any of the clauses mentioned please key in as 'NO DEVIATION' in the space provided.

Bidder's Name & Address alongwith GSTIN no. :

The Chief Engineer, Electy., Tendering & Procurement, KPTCL,9th Floor, Indhavana Bhavana, A.R Circle, Bangalore. - 560009.

I/we have read each of the Clauses mentioned in INVITATION FOR TENDERS , INSTRUCTION TO TENDERERS , CONDITIONS OF CONTRACT, SPECIAL CONDITIONS OF CONTRACT and COMMERCIAL TERMS AND CONDITIONS and all the sections of Bid documents.

The following are the commercial Deviations and Variations from and exceptions to the Specifications and documents for

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

These deviations and variations are exhaustive. Except these deviations, the entire work shall be performed as per your specifications and documents.

Sl. NO. SECTION CLAUSE NO. DESC. AS PER SPECIFICATION STATEMENT OF DEVIATIONS/VARIATIONS

Note : Deviations specified elsewhere in the specification will not be considered.

Place Designation

Name of the company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-6 : TECHNICAL DEVIATION

SHEET FOR TECHNO-COMMERCIAL OPENING

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

Please key in the SlNo., Section , Clause , Description as given in Bid sheets and finally your Statement of Deviation/Variations.

This Sheet would be opened at the Techno-Commercial Opening.

For any further assistance for submitting your bids please call up KPTCL office. Please fill only in the blue coloured cells.

We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)

We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)

We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)

If you are not deviating from any of the clauses mentioned please key in as 'NO DEVIATION' in the space provided.

Bidder's Name & Address alongwith GSTIN no. : TO,

THE CHIEF ENGINEER (ELECTRICTICTY), TENDERING AND PROCUREMENT, KPTCL,9TH FLOOR, INDHANA BHAVANA, A.R CIRCLE, BANGALORE-560009

The following are the Technical Deviations and Variations from and exceptions to the Specifications and documents for

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

These deviations and variations are exhaustive.Except these deiviations and variations, the entire work shall be performed as per your specification and documents.

Sl. NO. SECTION CLAUSE NO. DESC. AS PER SPECIFICATION STATEMENT OF DEVIATIONS/VARIATIONS

Note : Deviations specified elsewhere in the specification will not be considered.

Place Designation

Name of the company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE 7(List of special tools and tackles )

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

Bidder's Name & Address alongwith GSTIN no. : TO,

THE CHIEF ENGINEER (ELECTRICTICTY), TENDERING AND PROCUREMENT, KPTCL,9TH FLOOR, INDHANA BHAVANA, A.R CIRCLE, BANGALORE-560009

List of special tools and tackles the price of which is included in bid price.

Sl. No. For equipment Description of item Unit Quantity

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

NOTE: 1 ) SHALL BE UPLOADED WITHOUT PRICES

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer, Electy., Tendering & Procurement, KPTCL,9th Floor, Indhavana Bhavana, A.R Circle, Bangalore. - 560009.

We have uploaded with our proposal the following additional information.

Sl. No. Brief Description of information Ref. and Page No.

Place Designation

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (1 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

BIDDER'S NAME AND ADDRESS: TO,

THE CHIEF ENGINEER (ELECTRICTICTY), TENDERING AND PROCUREMENT, KPTCL,9TH FLOOR, INDHANA BHAVANA, A.R CIRCLE, BANGALORE-560009

a) * We have submitted bid as individual Bidder. (Key in Individual Bidder )

b) * We have submitted bid in Consortium with the following Bidders. (Key in Consortium )

Name of Consortium Partner Scope / Participation of each Consortium Partner

(* Fill-up whichever is applicable)

1.0 GENERAL INFORMATION

The Bidder, bidding for this package are requested to complete the information in the following form.

Sl. No. Particulars Bidder Details

1 Name of the Firm

2 Address of Head Office / Registered Office GST no.

5 Name of Contact person with Designation

6 Place of Incorporation/Registration

7 Year of Incorporation/Registration

8 Constitution or legal status of Tenderer [Upload copy]

9 Place of Registration [Upload copy]

10 Principal place of business

2.0 We are furnishing the following details/documents in support of Qualifying requirement for above mentioned project

Sl.No. Particulars For individual Bidder In case of Consortium :

Lead Bidder Consortium partner

(a) Written power of attorney of the signatory on the bid to commit the bidder.

1 Uploaded / Not

(b) Certificate of Registration of the Company. Please mention the date of incorporation of the company

1 Uploaded / Not

(c ) Valid Super Grade Electrical Contractor’s License issued by the Government of Karnataka as on the date of techno commercial Bid opening. Please mention the date of expiry of the License certificate issued by GOK/ Undertaking to this effect

1 Uploaded / Not

(d) Self declaration regarding Litigation w.r.t KPTCL contracts over the last five years (refer IFT)

1 Uploaded / Not

(e) Self declaration for ‘not being disqualified regarding non-performance in any of the Government utilities in the past five years’. (refer IFT)

1 Uploaded / Not

(f) An undertaking to source the supply of equipment/ material from KPTCL approved vendors only as per QR for Vendor registration, available in the KPTCL website ie., kptcl.karnataka.gov.in, Link Tendering & Procurement-Application for Vendor.

1 Uploaded / Not

(g) Self declaration regarding no action against the bidder have been taken by KPTCL in respect of Risk & Cost clause

1 Uploaded / Not

(h) Self declaration regarding 'Eligibility clauses in respect of restrictions on procurement from a bidder of a country which shares a land border with India as per Annexure-XVI

1 Uploaded / Not

(i) Self declaration regarding RESTRICTIONS ON SOURCING OF EQUIPMENTS/MATERIALS BY THE BIDDER FROM A VENDOR OF A COUNTRY WHICH SHARES A LAND BORDER WITH INDIA as per Annexure -XVII

1 Uploaded / Not

Section 3 : 1.3 Work performed of similar nature in the last Ten years of both Lead Bidder & Consortium partner (in case of Consortium) as per Clause No: 3.2 (b) (i) & (ii) of ITT

Project Name Name & Address of the Employer Description of Work Voltage class Number of Sub-Stations/TBs/Length of the Line Contract Number Value of contract Rs. Lakh Date of issue of work order Specified period of completion Actual date of commissioning Remarks explaining reasons for delay in commisioning of work

Name of Consortium Partner

Note : 1 . The documentary proof of fulfilling the qualifying requirements shall be uploaded along with the bid. (i) The bidder shall upload the P.O,LOI/LOA, DWA, Work done, Performance Certificates issued by the end users not below the rank of Executive/ Divisional Engineer along with the bid. (ii) The work experience of Bidders who have executed DCW works/ Self execution works under the supervision of KPTCL officers and the works executed for BMRCL/ KIADB/ BDA/KBJNL/IPP works/other Government or Public sector organizations will also be considered subject to fulfilling the stipulated qualifying requirements and uploading necessary documentary evidence

2. The qualifying experience of the Bidder and Consortium Partner(in case of Consortium) who is having qualifying experience shall be furnished in the above performa and Documentary Proof in support of above shall be uploaded in the form of certificates issued by authorized officers of concerned organisations.

3. IF this sheet is insufficient for furnishing the qualifying experience of the Bidder then similar sheets shall be seperately uploaded.

4. In case of work executed under a contract that had been awarded on a joint venture, the experience of individual joint venture partner shall be considered limited to the scope of that partner under the said contract. The copy of the agreement executed with awarding agency shall be uploaded as proof of the same

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (2 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

BIDDER'S NAME AND ADDRESS: TO,

THE CHIEF ENGINEER (ELECTRICTICTY), TENDERING AND PROCUREMENT, KPTCL,9TH FLOOR, INDHANA BHAVANA, A.R CIRCLE, BANGALORE-560009

Section 3 : 1.5 Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender of a Bidder

(A) Existing commitments and on-going works:

Description of work Place & State Contract No & Date Name and Address of Employer Value of contract (Rs. Lakh) Stipulated period of cof Completion Value of works remaining to be completed ( Rs.Lakh.) (Attach Certificates from Engineers –in- Charge) Anticipated date of commissioning

Ex-Works GST Total (Ex-works + GST)

Name of the Lead Bidder

Note:Attach Certificates from Engineers –in- Charge

B)Works for which Tenders already submitted

Description of work Place & State Name and Address of Employer Estimated value of works (Rs. Lakh) Stipulated period of Completion Date when decision is expected Remarks if any

Ex-Works GST Total (Ex-works + GST)

Name of the Lead Bidder

i) The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent. OR The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be verified and certified by Chartered Accountant/ Cost Auditor. However, the Bidder has to upload the PO/Work Award copies for existing commitments and on-going works

ii) A self-declaration is to be uploaded by the Lead Bidder & Consortium partner (in case of Consortium) stating that "the information with regard to assessed available tender capacity (Works on Hand) furnished are correct

iii. Bidders shall furnish Certificate from Chartered Accountants for split details of Ex-works values and GST of Contract values of the works in the prescribed format as at Clause No. 1.5 of Section-3: Qualification Information by the Lead Bidder & Consortium partner (in case of Consortium)

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (3 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

BIDDER'S NAME AND ADDRESS: TO,

THE CHIEF ENGINEER (ELECTRICTICTY), TENDERING AND PROCUREMENT, KPTCL,9TH FLOOR, INDHANA BHAVANA, A.R CIRCLE, BANGALORE-560009

Following is the list of major supplied Substation equipments/accessories which are type tested and designed, manufactured by us in accordance with internationally recognised standards.

Sl. No. Item rating, type and Designation Qty Customer Date of Order Date of Supply Date of Commissioning Ref. of Cusomer's certificate of successful operation enclosed Ref. of layout & Customer's certificae for successful commission

Note: Documentary Proof in support of above shall be uploaded in the form of certificates issued by authorized officers of concerned organisations.

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (4 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

Bidder's Name & Address alongwith GSTIN no. :

Section 3 : 1.7 Reports on the financial standing of the tenderer(Lead bidder & Consortium partner (in case of Consortium)) ,such as Profit and Loss Statements and Auditor’s reports in the preceeding last five years, Audited Financial statements i.e Balance sheets, P&L statements, Turnover certificates duly certified by chartered Accountant as documentary evidence shall be uploaded.

SLNo. Particulars Year Lead Bidder Consortium Member

Mention Year Turnover excluding GST (in Rs.) GST Amount (in Rs.) Mention Year Turnover excluding GST (in Rs.) GST Amount (in Rs.)

Names of the constituent Firm VOID

1 Annual turn over for the last Five years Year(1) 2020-21 2020-21

2 Liquid Assets / Credit availability or access to evidence of assets

3 Whether Audited Balance sheets and Profit & Loss statement are enclosed for the last Five Years ? (yes/No)

4 Whether Bankers certificate enclosed for credit facilities? (Yes/No)

Note: Bidders shall furnish Certificate from Chartered Accountants for split details of financial Turnover and GST in the prescribed format (Annexure-XX) of tender document.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 9 (5 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

BIDDER'S NAME AND ADDRESS: TO,

THE CHIEF ENGINEER (ELECTRICTICTY), TENDERING AND PROCUREMENT, KPTCL,9TH FLOOR, INDHANA BHAVANA, A.R CIRCLE, BANGALORE-560009

The information to be filled in by the Tenderer hereunder will be used for purposes of computing Tender capacity as provided for in Clause 3 of the Instructions to Tenderers. This information will not be incorporated in the Contract.

Bidder Attach Copy

1.1 Constitution or legal status of Tenderer [Upload copy]

Place of Registration [Upload copy]

Principal place of business

Section - 3: 1.2 Total value of works executed (KPTCL & Non KPTCL works) Excluding GST and payments received in the last five years (in Rs. Lakhs) of the Bidder.

1.2 Total value of works executed (KPTCL & NON KPTCL works) Excluding GST and payments received in the last five years (in Rs. Lakhs) of the Bidder. Financial Year KPTCL works Non KPTCL works

Individual Bidder In case of Consortium Individual Bidder In case of Consortium

Total value of works Excluding GST in Rs. Lakh Lead Bidder Consortium Partner Total value of works Excluding GST in Rs. Lakh Lead Bidder Consortium Partner

Total value of works Excluding GST in Rs. Lakh Total value of works Excluding GST in Rs. Lakh Total value of works Excluding GST in Rs. Lakh Total value of works Excluding GST in Rs. Lakh

2020-21 VOID VOID VOID VOID

2021-22 VOID VOID VOID VOID

2022-23 VOID VOID VOID VOID

2023-24 VOID VOID VOID VOID

2024-25 VOID VOID VOID VOID

VOID VOID VOID VOID

Note: Attach relevant Certificate/s from Chartered Accountant.

Section 3: 1.9 Name, address, telephone number & e-mail id of the Tenderers' bankers who may provide references if contacted by the Employer:

1.9 Sl.No Name, address, telephone number & e-mail id of the Tenderers' bankers

Section 3: 1.12 Information on litigations in which the Tenderer is involved:

Other Party(ies) Employer Details of Dispute Amount involved Remarks showing Present Status

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-10 (1 of 3) Details of Tools and Plants available

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

BIDDER'S NAME AND ADDRESS: To

THE CHIEF ENGINEER (ELECTRICTICTY), TENDERING AND PROCUREMENT, KPTCL,9TH FLOOR, INDHANA BHAVANA, A.R CIRCLE, BANGALORE-560009

Following are the details of the Tools and Plants available with us.

Sl. No. Description Quantity Make Present Location / Project Remarks (if any)

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE 10 (2 of 3) Details of Technical staff employed

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

BIDDER'S NAME AND ADDRESS: To

THE CHIEF ENGINEER (ELECTRICTICTY), TENDERING AND PROCUREMENT, KPTCL,9TH FLOOR, INDHANA BHAVANA, A.R CIRCLE, BANGALORE-560009

Section 3: 1.8 Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Sl. No. Name of the employee Designation Branch (Degree/Diploma) Year of Passing Since when employed in erection division Past Experience

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE 10 (3 of 3 )

SHEET FOR TECHNOCOMMERCIAL OPENING

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

BIDDER'S NAME AND ADDRESS: To

THE CHIEF ENGINEER (ELECTRICTICTY), TENDERING AND PROCUREMENT, KPTCL,9TH FLOOR, INDHANA BHAVANA, A.R CIRCLE, BANGALORE-560009

We propose the following deployment of manpower for the substation and Line package.

Sl. No. Category MONTHS AFTER PLACEMENT OF AWARD LETTER

1 Project manager

2 Sr. Project Manager

5 Skilled labour

6 No skilled labour

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-11 (A) : COMPLETION SCHEDULE FOR STATION/TERMINAL BAYS

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

Bidders Name and Address: To,

The Chief Engineer, Electy., Tendering & Procurement, KPTCL,9th Floor, Indhavana Bhavana, A.R Circle, Bangalore. - 560009.

We hereby declare that following schedules shall be followed by us for the above work. The period of various activities from the date of placement of award letter shall be as follows

SL.NO Activity Period in Months for the work of Substations

Commencement Completion

1 Detailed engineering

2 Procurement of bought out items / raw materials

3 Manufacturing & Testing

5 Setting up of site office, Sheds & stores etc.

7 Concreting for

a)Structure Foundations

b)Equipment and mounting structure foundadions

c)Cable trenches

2. Installation

8 Receipt(at site) of

a)Main equipment / spares

c)Insulators & Hardwares

d)Clamps & Connectors

e)Marshalling kiosks

f)Cables & Cabling Materials

a)Main structures

b)Equipment support structures

10 Equipment Erection

12 Bus bar erection

15 Completion of testing and ready for commissioning

16 Commissioning

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-11B : COMPLETION SCHEDULE FOR TRANSMISSION LINES

SHEET FOR TECHNOCOMMERCIAL OPENING

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Bidders Name and Address: To,

The Chief Engineer, Electy., Tendering & Procurement, KPTCL,9th Floor, Indhavana Bhavana, A.R Circle, Bangalore. - 560009.

We hereby declare that following shedules shall be followed by us for the above work. The period of various activities from the date of placement of award letter shall be as follows.

SL.NO Activity Period in months for work of Construction of Transmission Lines

Commencement Completion

1 Submission of Drawings

2 Completion of detailed engineering

3 Commencement of Manufacturing

4 Completion of Manufacturing

5 Readiness for testing

6 Readiness for Shipment

7 Receipt at Site

8 Completion of Shipment

1 Detailed Survey

2 Setting up of site office, sheds and stores etc.

3 Exacavation for foundations.

4 Foundations and other Civil Works

5 Erection of Tower alongwith accessories

6 Stringing of conductor/ groundwire alongwith accessories

7 Testing , Commissioning and Handing over.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 12 TYPE TESTS & TEST CHARGES OF EQUIPMENT/MATERIALS

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

BIDDERS SHALL INDICATE VARIOUS TYPE TESTS IN LIGHT BLUE COLOURED CELLS

ALL THE TYPE TESTS APPLICABLE FOR EACH OF THE EQUIPMENTS SHALL BE INCLUDED.

Bidders Name and Address To,

The Chief Engineer, Electy., Tendering & Procurement, KPTCL,9th Floor, Indhavana Bhavana, A.R Circle, Bangalore. - 560009.

SL.No Details of Equipments Type Test Test Charges ( in Rs )

1 Power Transformer:

a) 12.5MVA, 66/11kV

2 SF6 Circuit Breakers:

4 Current Transformer:

5 Voltage Transformers:

6 Capacitive Voltage Transformers:

7 Surge Arrestors

8 a) Relay & Protection Panels

b) Substation Automation

9 L.T. A.C Panel

10 Station Battery

11 Station Battery Charger

12 PLCC Battery

13 PLCC Battery Charger

14 1.1KV Copper control cables/LT Power Cable

15 11KV U.G Cable

16 PLCC equipment

17 Conductors & Earth Wire a) Moose ACSR

c) Coyote conductor

d) Lynx conductor

e) Panther Conductor

18 Insulators a) 120/90KN Disc Insulator Strings

b) Solid Core Insulators

c) Silicon rubber/ Disc/ Long rod insulators

d) Post Insulators

19 Station / Mounting Structures/Lightning Mask

21 Hardware Materials

22 Aluminium pipe and Clamps

23 AC DISTRIBUTION BOX

24 DC DISTRIBUTION BOX

26 Nitrojen Fire Fighting Protection System

NOTE: The Type Test / Special Tests, if repeated at the insistance of owner, the applicable testing charges shall be paid by the successful Bidder upfront to the laboratory and the same shall be reimbursable by KPTCL as per actuals on submission of Bills along with proof of payment and on successful completion of all the Type Tests, specified and on approval of the same by the owner. In case equipment/material fails in the type tests during testing then the testing charges paid by the Bidder to the laboratory will not be reimbursed by KPTCL. The above Clause is applicable for all the equipments/materials, in case, the Type Test / Special Tests, are repeated at the insistance of owner(KPTCL).

Place Printed Name

Karnataka Power Transmission Corporation Limited

Schedule -13-List of Optional Spares

SHEET FOR TECHNOCOMMERCIAL OPENING

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

BIDDERS SHALL NOTE THAT QUANTITIES INDICATED IN PERCENTAGE RATE IN THE FINANCIAL BID OFFER SHALL BE INDICATED HERE ALSO.

Bidders Name and Address

The Chief Engineer, Electy., Tendering & Procurement, KPTCL,9th Floor, Indhavana Bhavana, A.R Circle, Bangalore. - 560009.

List of optional spares required to meet the specified performance for a period of three years

Sl. No. For Equipments Details of item Unit Quantity

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 14-Guaranteed Losses :

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

Bidders Name and Address along with GSTIN No.: To,

The Chief Engineer, Electy., Tendering & Procurement, KPTCL,9th Floor, Indhavana Bhavana, A.R Circle, Bangalore. - 560009.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

LIST OF VENDORS

SHEET FOR TECHNOCOMMERCIAL OPENING

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

BIDDERS NAME AND ADDRESS To, The Chief Engineer, Electy., Tendering & Procurement, KPTCL,9th Floor, Indhavana Bhavana, A.R Circle, Bangalore. - 560009.

Sl. No. EQUIPMENT/ MATERIAL NAME OF THE VENDOR

VENDOR 1 VENDOR 2 VENDOR 3 VENDOR 4

1 Power Transformer

3 SF6 Circuit Breakers:

4 a)220KV Class

6 a)220KV Class

9 Current Transformer:

10 a)220KV Class

Voltage Transformers:

11 Capacitive Voltage Transformers:

12 a)220KV Class

13 b)66KV Class

14 Surge Arrestors

15 a)198 KV class

16 b)96 KV class

17 c)60 KV class

18 d) 9KV class

19 a) Relay & Protection Panels

20 b) Substation Automation

21 L.T. A.C Panel

22 Station Battery

23 Station Battery Charger

24 PLCC Battery

25 PLCC Battery Charger

26 1.1KV Copper control cables/LT Power Cable

27 11KV U.G Cable

28 PLCC equipment

29 Conductors & Earth Wire a) Panther

30 b)Moose ACSR

31 c) Drake ACSR

32 d) Coyote conductor

32 e) Lynx conductor

32 f) Earth Wire

32 Insulators a) 120/90KN Disc Insulator Strings

32 b) Solid Core Insulators

32 c) Silicon rubber/ Disc/ Long rod insulators

32 d) Post Insulators

32 Station / Mounting Structures/Lightning Mask

32 Hardware Materials

32 Aluminium pipe and Clamps

32 AC DISTRIBUTION BOX

32 DC DISTRIBUTION BOX

32 Nitrojen Fire Fighting Protection System

Name of the Company

SCHEDULE-16 : NO DEVIATION CERTIFICATE (ANNEXURE-I)

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED

With reference to our Bid Proposal No dated

We hereby confirm that we have read the provisions of the contract, the stipulation of these clause are acceptable to us,

and we have not taken any deviation whatsoever to these clauses:

a) Terms of payment Clause No. 37 of Section-5,Conditions of Contract (CC) and Clause No.8 of Special Conditions of Contrac (SCC)

b) EMD/Bid Security Clause No. 6, Section :1, Invitation for Tenders (IFT) and Clause No. 13, Section :2, Instruction to Tenderer (ITT)

c) Contract Performance Guarantee Clause No. 29 of Section:2, Instruction to Tenderers (ITT).

d) Penalty for delay Clause No. 41 of Section-5 : Conditions of Contract (CC).

e) Price Basis/ Price adjustment Clause No. 40 of Section-5 :Conditions of Contract (CC).

f) Defects Liability Period/Guarantee Clause No. 10 of Section-5 Special Conditions of Contract (SCC)

g) Work Schedule Clause No.17 of Section:5 Conditions of Contract (CC)

h) Taxes and Duties Clause No. 11.11 of Section-2: Instruction to Tenderers (ITT).

We further confirm that any deviation to the above clauses at SI.No. (a) to (h) found anywhere in our bid proposal, implicit or explicit, shall stand unconditionally withdrawn, without any cost, implication whatsoever to KPTCL.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE-17a FORM FOR BID SECURITY/EMD (ANNEXURE-IIA) (To be stamped on Rs.300/- Non-Judicial stamp paper in accordance with KPTCL Circular No. KPTCL/GMT/CIVIL (B7)/35/2024-MANAGER ESTATE (E-106992) dated 02.03.2024)

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED AND SENT ALONG WITH ORIGINAL BANK GUARANTEE AND ORIGINAL DD (TOWARDS BID GUARANTEE ) TO CHIEF ENGINEER ELECTRICIYT (T&P),KPTCL BANGALORE SO AS TO REACH AFTER THE LAST SUBMISSION DATE & ON OR BEFORE THE DATE & TIME OF OPENING TECHNO COMMERCIAL BIDS.

Ref No. Bank Guarantee No.

In accordance with Invitation to Bid under your specification

No. M/s having its Registered /

Head Office at (hereinafter called the 'Bidder') wish

to participate in the said Bid or and you, as a special favour have agreed

to accept an irrevocable and unconditional bank guarantee for an amount of

valid up to on behalf of Bidder in lieu of the Bid deposit required to be made

by the Bidder as a condition predecent for participation in the said Bid,in addition to the Demand draft No.

we the Bank at having our Head office at

(local address) guarantee and undertake to pay immediately on demand by Karnataka Power Transmission Corporation

the amount of (in figures and words)

without any reservation, protest, demur and recourse. Any such demand made by said `Owner' shall be conclusive and binding on us irrespective of any dispute or difference raised by the Bidder.

This Guarantee shall be irrevocable and shall remain valid up to and including

If any further extension of this guarantee is required, the same shall be extended to such required period (not exceeding one year) on receiving instructions

from M/s on whose behalf this guarantee is issued.

This Guarantee has been issued using SFMS Platform and the requisite communication in this regard has been forwarded to the Beneficiary Bank.

In witness whereof the Bank, through its authorised officer, has set its hand and stamp on this

Signature Signature

Official Addressess Designation with Bank Stamp.

Attorney as per Power of Attorney No.

Note : 1) Both the Bank Guarantee and Demand Draft shall be scanned and uploaded along with Electronic sheets. 2) This date shall be Forty Five (45) days after the last date for which the bid is valid.

Karnataka Power Transmission Corporation Limited

SCHEDULE-17b Form of Insurance Surety Bond towards EMD (ANNEXURE-IIB) (To be stamped on Rs.300/- Non-Judicial stamp paper in accordance with KPTCL Circular No. KPTCL/GMT/CIVIL (B7)/35/2024-MANAGER ESTATE (E-106992) dated 02.03.2024)

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

Insurance Surety Bond No.

In accordance with Invitation for Bids under your Bid Document No

M/s having its Registered /

Head Office at (hereinafter called the 'Contractor') wish

to participate in the said Bid for

As an irrevocable Insurance Surety Bond against Bid Security for an amount of * valid for days from **

required to be submitted by the Contractor as a condition precedent for participation in the said bid which amount is liable to be forfeited on the happening of any contingencies as mentioned under the Bidding Documents.

we, the having our Head office at

guarantee and undertake to pay immediately on demand by Karnataka Power Transmission Corporation Limited, (hereinafter called the 'Owner') the amount of

without any reservation, protest, demand and recourse. Any such demand made by the 'Owner' shall be conclusive and binding on us irrespective

of any dispute or difference raised by the Contractor and/or any right/remedy available to the Contractor in terms thereof.

This Insurance Surety Bond shall be unconditional as well as irrevocable and shall remain valid upto

If any further extension of this Insurance Surety Bond is required, the same shall be extended to such required period (not exceeding one year) on receiving instructions from

M/s on whose behalf this Insurance Surety Bond is issued.

In witness where of the Insurer, through its authorised officer, has set its hand and stamp on this

Signature Signature

Official Addressess Designation with Insurer Stamp

Attorney as per Power of Attorney No.

NOTE: 1. (*) The amount shall be as specified in the SPC. (**) This shall be the last date of bid submission deadline. (@) This date shall be Forty Five (45) days after the last date for which the bid is valid 2. The Insurance Surety Bond shall be from an Insurer as per guidelines issued by Insurance Regulatory and Development Authority of India (IRDAI) as amended from time to time. 3. The Owner shall be the Creditor, the Contractor shall be the Principal debtor and the Insurance company/Insurer shall be the Surety in respect of the Insurance Surety Bond to be issued by the Insurer. 4. The Insurance Surety Bond should be on Non-Judicial stamp paper/e-stamp paper of appropriate value as per Stamp Act prevailing in the state(s) where the Insurance Surety Bond is submitted or is to be acted upon or the rate prevailing in State where the Insurance Surety Bond is executed, whichever is higher. The Stamp Paper/e- stamp paper shall be purchased in the name of Contractor /Insurer issuing the Insurance Surety Bond. 5. While getting the Insurance Surety Bond issued, Contractors are required to ensure compliance to the points mentioned in Form of Bank Guarantee/Insurance Surety Bond Verification Check List enclosed in this Section of Bidding Documents. Further, Contractors are required to fill up this Form and enclose the same with the Insurance Surety Bond.

Karnataka Power Transmission Corporation Limited

SCHEDULE-18 PROFORMA OF LETTER OF UNDERTAKINGS (ANNEXURE-V)

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED

(To be executed on Non-Judicial paper of RequisiteValue)

1. I*/We* have read and examined the following bid documents relating to the

(full Scope of Work)

a) Notice Inviitng Tender

b) Conditions of Contract containing section 'Invitation for Tenders’, 'Instructions to Tenderers’, ‘Conditions of Contract’ and Contract Data.

c) Special Conditions of Contract along with Annexure to

d) Drawings No.

e) Technical Specifications

2 . I / We hereby submit our Bid and undertake to keep our Bid Valid for a period of One Hundred and Eighty days (180 days) from the Last date of bid submission as notified (either original or extended). I*/We* hereby further undertake that during said period I/We shall not vary/alter or revoke my/our Bid.

This undertaking is in consideration of KPTCL agreeing to open my/ our Bid and consider and evaluate the same for the purpose of award of Work in terms of provisions of clause entitled "Award of Construct" 'cl.no. 26 of Section ITT and cl.no. 18 of SCC of the Bid Documents.

Should this bid be accepted, I*/We* also agree to abide by and fulfil all the terms, conditions of provision of the above mentioned bid.

Signature along with Seal of Co.

(Duly Authorised to sign the Tender on Behalf of the Contractor.)

NAME OF THE COMPANY (in Block Letters)

SIGNATURE Date and Postal Address

DATE Telegraphic Address

NAME AND ADDRESS Telephone No.

Karnataka Power Transmission Corporation Limited

SCHEDULE-19 CONSORTIUM AGREEMENT (To be stamped on Rs.500/- Non Judicial stamp paper in accordance with KPTCL Circular No. KPTCL/GMT/CIVIL(B7)/35/2024-MANAGER ESTATE (E-106992) dated 02.03.2024) (ANNEXURE -XIII)

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED.

CONSORTIUM AGREEMENT AMONGST M/s M/s

For Bid Specification No. OF KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

This consortium agreement executed on this day Month of Two thousand Twenty Three

amongst M/s a company incorporated under the laws of (Country) and having its registered office at

(hereinafter called the "Lead Company" which expression shall include its successors ,executors and permitted assigns),

M/s a company incorporated under the laws of (Country) and having its registered office at

(hereinafter called the "Constituent Company" which expressions shall include its successors,executors and permitted assigns)

for the purpose of making a bid and entering into a contract (In case of award) against the specification no.

For NAME OF THE WORK

for Karnataka Power Transmission Corporation Ltd. having its registered office at Indhana Bhavana , A.R Circle, Bangalore 560 009 , Karnataka (hereinafter called the "Owner"). The leader of the consortium shall abide by the general terms and conditions specified by the Purchaser. WHEREAS the Owner invited bids as per the above mentioned specifications for the design, manufacture, supply and erection, testing and commissioning of Equipments/Materials stipulated in the bidding documents under subject package

NAME OF THE WORK

AND WHEREAS Section-I ( Volume-1: Clause No. 11:- Qualifying Requirement), forming part of the bidding documents, stipulates that a consortium meeting the requirements of Section-I, ( Invitation of Bid) applicable may bid, provided the Consortium fulfills all other requirements of specification and in such a case, the Bid shall be signed by the members so as to legally bind the members and who will be jointly and severally liable to perform the Contract and all obligations hereunder.

The above clause further states that the consortium agreement shall be attached to the bid and the contract performance guarantee will be as per the format enclosed with the bidding document without any restriction or liability for either party.

AND WHEREAS the bid has been submitted to the Owner vide proposal No dated

by Lead Company based on the Constituent agreement between all the consortium under these presents and the bid in accordance with the requirements of Specifications (Qualification Requirements).

NOW THEREFORE THIS UNDERTAKING WITNESSETH AS UNDER:

In consideration of the above premises and agreements all the partners to this consortium members do hereby now agree as follows:

1 In Consideration of the award of the Contract by the Owner to the Consortium members, we , the members to the consortium agreement do hereby agree that M/s

shall act as Lead Company and further declare and confirm that we shall jointly and severally be bound up to the Owner for the successful performance of the contract and shall be fully responsible for the design, manufacture, supply and successful performance of the equipments in accordance with the Contract.

2 In case of any breach of the said contract by the Lead company or other constituent of the Consortium agreement, the Lead company do hereby agree to be fully responsible for the successful performance of the contract and to carryout all the obligations and responsibilities under the contract in accordance with the requirements of the Contract

3 Further, if the Owner suffers any loss or damage on account of any breach in the contract or any shortfall in the performance of the equipment in meeting the performance guaranteed as per the specification in terms of the contract, the Lead company of these presents undertake to promptly make good such loss or damages caused to the Owner, on its demand without any demur. It shall not be necessary or obligatory for the Owner to proceed against Lead Partner to these presents before proceeding against or dealing with the other Partner (s).

4 The Financial liability of the members of the consortium agreement to the Owner, with respect to any of the claims arising out of performance or non-performance of the obligations set forth in the said agreement, read in conjunction with the relevant conditions of the contract shall, however not be limited in any way so as to restrict or limit the liabilities of any of the members of the agreement.

5 It is expressly understood and agreed between the members to this consortium agreement that the responsibilities and obligations of each of the partners shall be as delineated hereunder (To be incorporated suitably by the member to this agreement). However, each member of the consortium will be severally and jointly responsible for the faithful performance of the contract. It is further agreed by the member that the above sharing of responsibilities and obligations shall not in any way be a limitation of joint and several responsibilities of the members under this contract.

Sl.No. Name of the Lead Bidder/Consortium Partner. Scope of the work/Participation

We further declare ourselves bound to execute our scope of work/participation as stated above;

6 This Consortium agreement shall be constructed and interpreted in accordance with the laws of India and the courts of Bangalore shall have the exclusive jurisdiction in all matters arising there under.

7 In case of an award of a Contract, we the Consortium members do hereby agree that we shall be jointly & severally responsible for the works respectively executed and Lead company shall furnishing a contract performance security from a bank in favor of the PURCHASER in the forms acceptable to purchaser for value of Five percent (5%) of the Amount put to tender (Excluding GST) plus additional security for unbalanced tenders in accordance with Clause 25.5 & 29 of ITT and Clause 43 of the CC (Conditions of Contract).

8 It is further agreed that the Consortium agreement shall be irrevocable and shall form an integral part of the contract, and shall continue to be enforceable till the owner discharges the same. It shall be effective from the date first mentioned above for all purposes and intents.

IN WITNESS WHEREOF the partners to the Consortium have through their authorized representatives executed these presents and affixed Common seals of their companies, on the day, month and year first mentioned above.

WITNESS for Lead Company

(Signature) (Signature of the authorized representative)

(Name in Block Letters) (Name)

Designation (Designation)

Common Seal of the Company

2 ( For Constituent 1)

(Signature of the authorized representative)

(Name in Block Letters) (Name)

Designation Common Seal of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE-20(a) POWER OF ATTORNEY (ANNEXURE-XI)

(For Individual Bidder )

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED.

POWER OF ATTORNEY

KNOW ALL MEN BY THESE PRESENTS that we

a Company incorporated

under the laws of

and having its Registered Office / Head Office at

"Manufacturer / Bidder" which expression shall unless repugnant to the

Context or meanig thereof, include its successors, administrators and assigns)

acting through Mr its constitute, nominate and appoint

M/s a Company incorporated under the laws of

and having its Registered / Head Office at

as its duly constituted lawful Attorney (hereinafter called "Attorney"

or "Authorized Representative") to exercise all or any of the powers for and on

behalf of the "Manufacturer / Bidder" in regard to Specification No.

the bids for which have been invited by

(Address "Owner") to undertake the following acts:

i. To submit proposal and participate in the aforesaid Bid Specification of the Owner on behalf of the "Manufacturer / Bidder".

ii. To negotiate with the "Owner" the terms and conditions including price for award of the contract pursuant to the aforesaid Bid and to sign the contract with the "Owner" for and on behalf of the Manufacturer / Bidder.

iii. To receive accept and execute the contract for and on behalf of the "Manufacturer / Bidder".

iv. To do any other act or submit any document related to the above.

It is expressly understood that the Power of Attorney shall remain valid, binding and irrecoverable till submission of the Contract performance guarantee in terms of the Contract. The "Manufacturer / Bidder" hereby agrees and undertakes to ratify and confirm all the whatsoever the said "Attorney" / "Authorised Representative" quotes in the Bid, negotiates and signs the contract with the "Owner" and / or purports to act on behalf of the "Manufacturer / Bidder" by virtue of this Power of Attorney and the same shall bind the "Manufacturer / Bidder" as if done by itself.

IN WITNESS WHEREOF THE "Manufacturer / Bidder" has executed these presents at

on this day of under

the Common Seal of the Manufacturer company / Bidder.

Specimen Signature of Attorney Holder

(Name & Designation)

For and on behalf of

Common Seal of the above Manufacturer/Bidder

Has been affixed thereto in the presence of :

Karnataka Power Transmission Corporation Limited

SCHEDULE-20(b) POWER OF ATTORNEY (ANNEXURE-XV)

(FOR CONSORTIUM MEMBER)- VOID

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED

POWER OF ATTORNEY

(To be stamped on Rs.500/- Non Judicial stamp paper in accordance with KPTCL Circular No. KPTCL/GMT/CIVIL (B7)/35/2024-MANAGER ESTATE (E-106992) dated 02.03.2024)

KNOW ALL MEN BY THESE PRESENTS that we

a Company incorporated

under the laws of

and having its Registered Office / Head Office at

"Manufacturer / Bidder" which expression shall unless repugnant to the

Context or meanig thereof, include its successors, administrators and assigns)

acting through Mr its constitute, nominate and appoint

M/s a Company incorporated under the laws of

and having its Registered / Head Office at

as its duly constituted lawful Attorney (hereinafter called "Attorney"

or "Authorized Representative") to exercise all or any of the powers for and on

behalf of the "Manufacturer / Bidder" in regard to Specification No.

the bids for which have been invited by

(Address "Owner") to undertake the following acts:

i. To submit proposal and participate in the aforesaid Bid Specification of the Owner on behalf of the "Manufacturer / Bidder".

ii. To negotiate with the "Owner" the terms and conditions including price for award of the contract pursuant to the aforesaid Bid and to sign the contract with the "Owner" for and on behalf of the Manufacturer / Bidder.

iii. To receive accept and execute the contract for and on behalf of the "Manufacturer / Bidder".

iv. To do any other act or submit any document related to the above.

It is expressly understood that the Power of Attorney shall remain valid, binding and irrecoverable till submission of the Contract performance guarantee in terms of the Contract. The "Manufacturer / Bidder" hereby agrees and undertakes to ratify and confirm all the whatsoever the said "Attorney" / "Authorised Representative" quotes in the Bid, negotiates and signs the contract with the "Owner" and / or purports to act on behalf of the "Manufacturer / Bidder" by virtue of this Power of Attorney and the same shall bind the "Manufacturer / Bidder" as if done by itself.

IN WITNESS WHEREOF THE "Manufacturer / Bidder" has executed these presents at

on this day of under

the Common Seal of the Manufacturer company / Bidder.

Specimen Signature of Attorney Holder

(Name & Designation)

For and on behalf of

Common Seal of the above Manufacturer/Bidder

Has been affixed thereto in the presence of :

Karnataka Power Transmission Corporation Limited

SHEET FOR TECHNOCOMMERCIAL OPENING (UN - PRICED)

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

Bidders Name and Address

To, The Chief Engineer, Electricity, Tendering & Procurement, KPTCL, Bangalore - 09.

We Declare that the ratings and performance figures of the equipment furnished by us under the Turnkey Package are Guaranteed. We further declare that in the event of any deficiencies in meeting the guarantees in repect of the characteristics as established after conducting the performance test, you may at your discretion, reject the equipment, in which case we shall replace the same with equipment as per specification and meeting the guarantee, free of charge and within a resonable time, to be mutually agreed.

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE -22 - Check List

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

BIDDERS NAME AND ADDRESS To,

The Chief Engineer, Electy., Tendering & Procurement, KPTCL,9th Floor, Indhavana Bhavana, A.R Circle, Bangalore. - 560009.

CHECK LIST FOR SUBMISSION OF SCHEDULES

REFERENCE OF FORM & SCHEDULE DETAILS OF FORM & SCHEDULE WHETHER INCLUDED IN TECHNO-COMMERCIAL SHEETS (ELECTRONIC) YES/NO WHETHER INCLUDED IN Itemwise Financial Offer(on Percentage Rate Basis) (ELECTRONIC) YES/NO WHETHER INCLUDED IN COMMERCIAL

PROPOSAL BID PROPOSAL

Schedule - 1 PRICE COMPONENTS

Schedule 2 (1 of 2 & 2 of 2) Summary of Price Components

Schedule 2A Schedule of Discounts

Schedule 2B Statement of Commercial Terms & Conditions

Schedule 3A & 3B Price break up for supply & erection

Schedule 3C Price break up for civil works

Schedule 4 Price break up for mandatory spares and maintenance & Testing Equipments.

Schedule 5 Commercial deviations

Schedule 6 Technical deviations

Schedule 7 List of special Tools & Tackles

Schedule 8 Additional information.

Schedule 9 Qualification Information [Technical & Financial]

Schedule 10 Details of Tools and plants and man power deployment

Schedule 11 A & 11B Schedule for activities & Commissioning.

Schedule 12 Type Test Charges

Schedule 13 List of optional spares and cost.

Schedule 14 Guaranteed loss of transformer.

Schedule 15 List of vendors.

Schedule 16 Annexure 'A' No deviation certificate

Schedule 17a & 17b Proforma for Bid guarantee

Schedule 18 Proforma for letter of undertaking

Schedule 19 Consortium Agreement-VOID

Schedule 20(a) & 20(b) Power of attorney & Schedule-20(b) is VOID

Schedule 21 Guaranteed Declaration

Schedule 22 Check list

DRS 1-34 sairam

To be Uploaded Contract Quality Assurance Programme

To be Uploaded Type Test Certificates

To be Uploaded & furnished Bid Security/EMD

To be Uploaded Written Power of Attorney

To be Uploaded Letter of Undertaking

To be Uploaded No Deviation Certificate

To be Uploaded Any Other (Please Specify)

To be Uploaded Any Other (Please Specify)

To be Uploaded Any Other (Please Specify)

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

GUARANTEED TECHNICAL PARTICULARS FOR RELAY & PROTECTION PANELS

(Bidder should indicate the guaranteed technical data of all equipments / materials for each type of rating separately)

Relay & Protection Panels

Sl. No. Description

I Description, Construction & formation details :

1 Make and Type reference of manufacturer

i) type of construction.(duplex or simplex)

ii) type of scheme ( numerical type or static type)

b) for power transformer

3 Thickness of sheet steel (mm):

i. Door, Top and Bottom of panel

4 Tentative overall dimensions (L*B *H) (mm) of each panel

5 Dead weight of each panel (Kgs)

6 Approximate weight of each panel with all components (Kgs)

7 Details of packing for transport

8 Overall dimensions of transport package (L*B*H) (mm)

9 Approximate gross weight of transport package (Kgs)

10 Exterior paint film thickness (microns) and paint colour

11 Interior paint film thickness (microns) and paint colour

12 Cubicle Lighting : Volts, wattage, Type of holder and fitting whether provided with door control switch or not.

13 Safety earthing :

a. Material of conductor

b. Size (W*T) (mm)

c. Surface treatment and finish of conductor.

d. Type of end connection

14 Panel front/rear component identity board

c. Size of lettering and colour

d. Method of fixing

15 Panel wiring :

a. Type and material of wire conductors, insulation and voltage grade.

b. Conductor cross sectional area or strands/gauge of wire and colour scheme adopted for :

i. VT secondary circuits and annunciation circuit.

ii. Other Circuits.

c. Type of wire termination

16 Mimic bus details :

a. Type painted / strip fixed

c. Whether colour scheme specified will be followed

d. If not specify deviations.

II. TERMINAL BLOCKS AND CONNECTORS (USED FOR PANEL WIRING)

1 Make and Type reference of manufacturer

2 Insulation and voltage grade

3 Constructional details

4 Current rating of studs, size and material

5 Whether shrouding provided or not

6 Whether space terminals provided or not

7 Literature enclosed.

III. INDICATING LAMPS :

1 Wattage and voltage of lamp

2 Size of lens and material thereof

3 Type of lamp holder

4 Whether provided with series resistor? If yes, specify Ohmic value power loss

IV FUSE HOLDERS AND FUSES :

1 Make and Type reference of manufacturer

2 Insulation and voltage grade

3 Type of Insulation material

4 Type of fuses

5 Rating of fuses provided for different circuits

6 Literature enclosed.

VI. SELECTOR SWITCHES :

1 Make and Type reference of manufacturer

2 Type of handle / Switch

3 Mounting details

4 Number of positions

5 Number of contracts available in each position.

6 Making capacity of contacts

7 Breaking capacity of contacts

8 Whether locking arrangement is available.

9 Whether detailed literature and drawings encolsed. (YES/NO)

VII. PUSH BUTTONS :

1 Make and Type reference of manufacturer

2 Mounting details

3 Type of contact

4 Current and voltage rating

5 No. of contacts

6 Whether shrouding provided to prevent inadvertent operation (YES/NO)

7 Whether provided with integral engraved inscription plates (YES/NO)

VIII AUXILIARY CT's VT'S :

1 Make and Type reference of manufacture

b. Ratios available

d. Standard to which it conforms

e. Accuracy class

f. Short time current / voltage rating

g. Temperature rise

h. One minute power frequency withstand voltage

j. Mounting dimensional details

k. Panel in which to be provided with quantity thereof and connected ratio

3 For CT's only

a. Knee point voltage (KPV) (Volts)

b. Excitation current at KPV and 50% KPV (ma)

c. Internal impedance of primary and secondary windings in ohms

4 Literature enclosed.

IX. SPACE HEATERS :

1 Make and Type reference of manufacture

2 Type of space heater (Tubular / strip type)

3 Rating Wattage

4 Whether thermostat provided (YES/NO)

II INSTRUMENT TEST TERMINAL BLOCKS :

1 Make and Type reference of manufacturer

2 Insulation class and rating

3 Size and mounting details

4 Type of CT terminal shorting mechanism (LINK / SCREW)

5 Type of VT terminal Isolating Mechanism

6 Whether detailed literatures enclosed. (YES/NO)

C GENERAL PROTECTION RELAYS :

I The tenderer shall furnish guaranteed Technical particulars for all types of meters offered, in the following proforma (separate sheet shall be enclosed for each type of relay :)

1 Manufacturer's name or trade marks

2 Type designation

3 Size and mounting details (whether in draw out case)

4 Rated Values of both input and auxiliary energizing quantities

5 Values of the limits of the operative range(s) of the auxiliary energising quantity (ies)

6 Contacts data, Number and rating of main and auxiliary contacts

7 Rated value or setting range of the characteristic quantities and or angle

8 Limiting short-time thermal withstand values

9 Limiting dynamic values.

10 i. Burden data ( in case of poly input relays - data shall be furnished for appropriate set of input terminals).

a. At highest tap - AC current / voltage coil

b. At lowest tap - AC current / voltage (coil)

ii. DC power consumption.

11 Impulse and dielectric test voltage(s)

12 Details of accessories (If essential to the relay performance)

13 Details of accessories (Optional items)

14 Whether provided with seal in trip contacts

15 a. Type of operating characteristics

b. Accuracy of operating characteristics, operating time with details

16 H.F. disturbance test voltage (s)

17 Whether literature enclosed

18 Type of relay flag indicator and rating of target coil

II In addition to the above details, the following details shall also be furnished for relays specified below :

1 DOCR / DEFR :

a. Directional sensitivity

b. Minimum voltage at which the directional units operate

c. Characteristic angle

2 OVER FLUXING RELAY :

a. Whether provided with timer if so time setting available for Alarm and delayed trip.

3 Distance Protection Scheme for 220KV / 110KV / 66KV Lines:

A Type of distance measuring element

a. Starting unit

i. Type of scheme

b, No. of measuring element or comparator with details

c. Setting range of the distance measurement

d. No. of zones

i. Overall range for all zones.

ii. Reach setting range at rated current.

Zone - 1 (forward) - ohms

Zone - 2 (forward) - ohms

Zone - 3 (forward) - ohms

Off set zone 3 reverse - ohms

Zone extension (if any)

e. Characteristic of each zone

Phase fault unit

Earth fault unit

Phase fault unit

Earth fault unit

Phase fault unit

Earth fault unit

Zone - 3 off set

Zone -1 in ohms

1. Reach of the relay along with characteristic angle at rated current and voltage

2. Reach of the relay in resistive direction at rated current & voltage

3. Reach in reactive direction at rated current & voltage

Zone - 2 in ohms

1. Reach of the relay along with characteristic angle at rated current and voltage

2. Reach of the relay in resistive direction at rated current & voltage

3. Reach in reactive direction at rated current & voltage

Zone - 3 in ohms

1. Reach of the relay along with characteristic angle at rated current and voltage

2. Reach of the relay in resistive direction at rated current & voltage

3. Reach in reactive direction at rated current & voltage

Zone - 3 in Reverse ohms

1. Reach of the relay along with characteristic angle at rated current and voltage

2. Reach of the relay in resistive direction at rated current & voltage

3. Reach in reactive direction at rated current & voltage

f. Power swing blocking characteristic setting

i. Forward reach

ii. Reverse reach

g. Setting range of residual compensation

h. Setting range of mutual compensation

i. (i) Operating time

(ii) Time setting range

Power swing blocking

Zone - 1 (reach)

Zone - 2 (reach)

Zone - 3 (forward reach)

K. Polarising scheme

B. Additional featues provided :

a. Fault locator

b. Carrier aided tripping scheme

c. Power swing blocking

d. Broken conductor detection

e. Synchronous check

f. Weakend infeed

g. Switch on to fault

h. Fuse failure supervision

C. Facilities available for Fault Locator

a. Name and type reference of manufacturer

b. Rating and setting available

c. Rated V A burden

d. Power consumption voltage and current element

e. Memory capacity with details

f. Triggering method

h. Method of accuracy

D Auto Recloser:

a) Reclosing facilities available b) Single phase/three phase dead time range. c) Reclaim time range d) No. of modes selectable by selection switch e) Provision of Check synchronizing features and its time setting, range phase angle setting, voltage difference setting. f) Provision of deadline charging set range of voltage. g) Lock out facility.

E Disturbance Recorder:

a) No. of event channels b) No. of analog signals. c) Sampling rate d) Recording Band width e) Over current triggering – range. f) Under current triggering – range. g) Over voltage triggering – range. h) Pre fault time – range. i) Post fault time – range. j) Limit time – range. k) No. of recorded disturbances. l) Total recording time with 8 Analog and 16 event channels recorder. m) Voltage channels – details. n) Period of built in calendar. o) Current channels – details,

F EVENT RECORDER

a) Time tagging resolution. b) Events capacity i) Max. NO. of events per disturbance report. ii) Max. No. of disturbance reports

c) Time tagging error with synchronization. i) Once in One second ii) Once in ten seconds. iii) Once in sixty seconds

d) Timer tagging error without synchronization.

4 Restricted Earth fault Relay.

a) Manufacturer Type P designation

b) Operating time 2 x setting

5 Differential protection scheme :

a. No. of restraining coils and operating coils.

b. Harmonic restraints provided with details

c. Rated VA Burden and power consumption of

i. Restraining coil

ii. Operating coil

d. Type of slope setting :

If variable, range of slope setting through fault current stability. Maximum & minimum range of HV / MV / LV current ratio over which the relay can be used.

e. Whether provided with switching inrush current restraint, if so type.

6 Trip circuit supervision relay:

a) Name of manufacturer.

b) Type & Designation.

c) Whether preclosing & post closing supervision provided.

7 High speed trip relay

a) Name of manufacturer.

b) Type & Designation.

c) Contact rating.

Current rating-

i) Continuous rating

ii) Rating for 5 secs.

d) Break Resistive load inductive load (with L/R = 40 msec.

e) Operating time at rated voltage (max).

f) Resetting time.

g) Whether supervisory relay included.

8 Local breaker back up protection.

a) Name of manufacturer.

b) Type & Designation.

c) Operating time

d) Resetting time

e) Setting range

9 Bus bar protection

a) Name of manufacturer.

b) Type & Designation.

c) Type of relay (numerical)

d) Principle of operation (biased/low impedance)

e) Operating time

f) Resetting time

g) Setting range.

h) Whether will it cause tripping for the differential current below the load current of heavily loaded feeder (Bidder shall submit application check for the same).

III The tenderer shall confirm whether the following details will be furnished at the time of approval of drawings:

a. Identification and location of removable parts.

b. Data of permit suitable connection of the relay (including the polarity)

c. Data concerning the earthing of metallic part

d. To indicate parts of modules which should not be replaced without observing precaution prescribed by the manufacturer.

GUARANTEED TECHNICAL PARTICULARS FOR ELECTRONIC TRIVECTOR METERS

Sl. No. PARTICULARS

1 Type of Meter

2 Class of Accuracy

3 Standard to which the meter conforms

4 Current rating for which accuracy is guaranteed for

a. Basic Current (ib)

b. Continuous Current overloading capability

c. Short time over current

d. Minimum Starting Current

5 a)Voltage rating for which accuracy is guaranteed for

b)Over voltage withstand capacity - continuous

c)Voltage Range

6 Other Parameters for which accuracy is guaranteed

a. Reference Temperature

b. Standard Reference Frequency (Hz)

c. Accuracy Guaranteed for

d. Frequency Range

e, For single Phase Loads / In- put

f. For two Phase Loads / In - put

g. For In-put / Loads without neutral in -puts unbalanced Voltages

h. Temperature Range

7 Insulation Resistance

8 Sampling Plan for measurement of Voltage, Current and Frequency

9 Power Loss in each Current circuit at Basic Current in VA & WATT

10 Power Loss in each Voltage circuit at reference in VA & WATT

11 Display device (Hardware details)

a. Type of Display i.e. LCD

b. Character size of display digits

c. No. of Display digits used

2. For parameter identification

d. Life of display unit (Guaranteed)

e. Method adopted for digit over flow

12 Display details (Software)

13 a. Non-volatile memory retention time in absence of power

b. Non - volatile memory capacity in KB.

c. RAM Capacity

d. Maximum number of Parameters which can be stored in non-volatile Memory at each half an hour intervals for Six Months.

14 Maximum demand

a. Parameters that can be dynamically selected

b. Integration Period Range

c. Provision for Automatic Rest

d. Type of MD Computation

15 Communication Inter-phase available

- for calibration

- for data transfer

16 Electro magnetic interference / Electro magnetic comparativity level

17 Mounting arrangement

18 Meter sealing arrangement

b. Meter terminal block

c. MD reset bush button

d. Battery unit

19 Degree of protection against moisture etc.,

20 a. Provision for real time clock

b. Real time clock accuracy

c. Life of real time clock (Guaranteed)

21 Power Supply backup

22 Measuring principle employed for

d. Maximum demand parameters

NOTE 1. Measuring principle adopted for each of the items above should be specified.

2. Measurement logic employed in case of Harmonics and contents up to which meter recognizes for measurement shall be furnished.

23 Abnormal conditions that will be identified with limiting values

24 Guarantee period offered for

a. Performance and accuracy

b. Components not covered under guarantee

25 Micro processor

a. Address in bits

b. Sampling rate

26 Compatibility of the software for the following

a. For generation of consumer bill directly with the existing KPTCL billing software

b. Compatibility of software provided for MRI, down loading from earlier version already supplied to KPTCL

c. Compatibility of software for generation of report for earlier versions

27 Additional features available

28 Agreement to furnish protocol details for development of required software through third party

29 Platform on which the meter communicates

30 Levels of security

a. For changing real time

b. Fir changing display parameters

c. For changing Load survey parameters

d. For changing TOD Registers, clock setting

e. Measuring principle, computation

31 Specification of reference standard offered

32 Specification of Laptop Computer offered

33 Specification of MRI kit offered

34 Specification of equipment offered for checking communication capability through RS232/RS485 port

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

TECHNICAL DATA SHEET

GUARANTEED TECHNICAL PARTICULARS FOR CIRCUIT BREAKERS

(Bidder is to indicate technical data for each type of rating)

Circuit Breaker Rating 145kV 72.5kV 33kV

a. Name of the Manufacturer

b. Country of Manufacture

c. Type of Circuit Breaker

d. Manufacturer's type designation

e. Standard Applicable

f. Rated Voltage (kV ms)

g. Rated Current :

i. Under normal condition (A)

ii. Under site conditions (A)

h. Rated frequency (Hz)

i. Number of poles

j. Whether 3 pole or single pole unit

k. Whether all the 3 poles ganged electrically or mechanically

l. Whether dead tank or live tank design

m. Type of installation

n. No. of break per pole

o. Latching Current (kA)

2 Guaranteed Ratings

a. Rated short circuit breaking current

i. Symmetrical component at highest system voltage (kA)

ii. DC Component (%)

iii. Asymmetrical breaking current at highest system voltage (kA)

b. Rated Making Capacity

i. At higher rated voltage (kAp)

ii. At lower rated voltage (kAp)

c. i. Maximum Total break time under any duty condition for any current up to rated breaking current with limiting conditions of voltage and pressure (ms)

ii. Rated breaking time (ms)

d. Closing time (ms)

e. Minimum opening time under any condition with limiting voltage and pressure (ms)

f. Maximum opening time under any condition with limiting voltage and pressure (ms)

g. Maximum close open time under any condition with limiting voltage and pressure (ms)

h. First pole to clear rating

i. Short time current rating (kA) for 1 Sec.

j. Rated operating duty

k. Maximum breaking capacity under kilometric faults and rated TRV characteristic (kAp)

l. Maximum breaking capacity under phase opposition (kAp)

m. Maximum line charging breaking current with temporary over voltage up to 1.4 p.u. (A)

n. Maximum over voltage (p.u.) on switching transformer on no load and corresponding charging current

o. Maximum period between closing of first contact & last contact in a pole (ms)

p. Maximum pole discrepancy (ms)

q. Maximum arc duration and corresponding current under lockout pressure.

r. Small fault current breaking capacity (kAp)

s. Pre-insertion resistor (if applicable)

i. Value / pole (Ohms) with tolerance

ii. Minimum and Maximum duration of insertion per pole (ms)

iii.Thermal rating for the c-1m-o-co-2m-c-1m-o-co for terminal fault considering maximum resistance and time setting.

iv. Thermal rating for the same duty as (iii) above for reclosing against trapped charges.

t. Maximum temperature rise for main contacts over design ambient temperature of 50oC

u. Rated voltage & pick up range for trip coil (V)

v. Rated voltage & pick up range for closing coil (V)

w. Rated pressure and limits of pressure of operating mechanism

x. Rated pressure and limits of pressure of extinguishing medium

y. Minimum dead time for

i. Three phase reclosing (ms)

ii. Single phase reclosing (ms)

z. Data of restriking voltage

i. Amplitude factor

ii. Phase factor

iii. Natural frequency

iv. Rate of rise of restriking voltage

3 Dielectric withstand of complete breaker

a. One minute dry & wet power frequency withstand voltage

i. Between live terminal and ground (kV rms)

ii. Between terminals with breaker contacts open (kV ms)

b. 1.2/50 micro impulse withstand test voltage

i. Between live terminals and ground (kVp)

ii. Between terminals with breaker contacts open (kVp)

c. Corona extinction voltage (kV rms)

d. Maximum radio interference voltage (micro V) at 1.1 Ur/v3

e. Total creepage distance

i. To ground (mm)

ii. Between terminals (mm)

4 Operating Mechanism

a. Type of operating mechanism for

b. Manufacturer's type designation

c. Normal power consumption (W) at rated voltage

ii. Closing coil

4.1 Pneumatic operating mechanism

a. Rated operating pressure (kg/sq.cm)

b. Range of pressure for (kg/sq.cm)

c. Air Consumption at rated pressure for

i. Closing (m3)

ii. Opening (m3)

iii. Close-open (m3)

d. Pressure drop/meter length of piping

e. Number and Capacity (m3) of breaker local air storage receivers

f. No. of close operations for which sufficient air is available in local receiver

g. Capacity of compressor (m3/hr) and working pressure (kg/cm2)

h. Maximum time for which compressor can operate continuously (min)

i. Time to fill

i. Air receiver after one CO operation (min)

ii. For making up of losses occurring in hours (min)

j. Pressure at which compressor

i. Starts (kg/cm2)

ii. Stops (kg/cm2)

k. Material of compressed air piping

l. Inner & outer dia of main piping (mm)

m. Whether interpole piping included in scope of supply

n. Manufacturer's name for

ii. Air receiver

iii. Pressure reducer

iv. Stop valves

v. Drain valves

o. Safety valve

i. Low pressure stage blow off at (kg/cm2)

ii. Intermediate stage blow off at (kg/cm2)

iii. High pressure stage blow off at (kg/cm2)

p. Safety valve opens at (kg/cm2)

q. No.of stored CO operation in breaker air receiver

r. Alarm switch closes on air receiver at (kg/cm2)

s. Lockout pressure (kg/cm2)

iii. Auto reclose

4.2 Hydraulic operating mechanism

a. Rated pressure of oil in operating cylinder (Kg/cm2)

b. Limits for pressure (Kg/cm2)

c. Quantity of oil (liter)

d. Details of arrangements to prevent change of position of breaker in the event of loss of hydraulic pressure.

e. Details of monitoring arrangement for hydraulic pressure.

f. No. of close -open operations possible after loss of AC supply to drive motor.

g. Details of hand pump set provided for emergency operation.

h. Pressure drop starting from lowest pressure at which motor starts for

i. C – operation

ii. O - operation

iii. CO - operation

iv. O - CO - operation

v. 2 - CO - operation

i. Time required to make up pressure upto loss of nitrogen pressure after

i. C – operation

ii. O - operation

iii. CO - operation

iv. O - CO - operation

v. 2 - CO - operation

4.3 Spring charged mechanism

a. Number of close open operations possible after failure of AC supply to motor.

b. Time required for motor to charge the closing spring (min).

c. Whether indication of spring charged condition provided in central control cabinet.

5 Type of Breakers

5.1 SF6 Circuit Breakers :

a. Quantity of SF6 per pole (m3) at rated pressure.

b. Guaranteed maximum leakage rate per year.

c. Rated pressure of SF6 in operating chamber (kg/cm2).

d. Limits of pressure at which breaker operate correctly (kg/cm2)

e. Standard to which SF6 gas complies.

f. Whether 20% spare SF6 gas. Stored in unused gas cylinders, included in proposal.

g. Capacity & filling ratio of containers in which SF6 gas would be shipped (m3) and the corresponding pressure (kg/cm2)

h. Whether breakers are dispatched filled with SF6 or required to be filled at site.

i. Type and make of SF6 pipe coupling used.

j. Type and make of mandatory maintenance equipment.

i. SF6 gas filling and evacuation trolley (portable)

ii. SF6 gas drying, filling, evacuating equipment and its capacity.

iii. Operating analyzer Type and make

iv. SF6 gas leak detector

k. Parameters of SF6 gas for initial filling and satisfactory operation.

ii. Dielectric strength kV/mm

iii. Acidity (ppm)

iv. Water content (ppm)

v. Oil content (ppm)

vi. Condensation temperature (oC)

vii. Resistivity (Ohm-cm)

l. Whether details of SF6 gas viz test methods, handling etc. enclosed.

m. Type and material of gasket used to ensure gas tight joints for

i. Metal to metal joints

ii. Metal to porcelain joints

n. Method of housing SF6 gas compressors and equipment

i. At Circuit Breaker

ii. In control cubicle

o. Type and make of

ii. Pressure gauge

p. Densimeter Settings

q. Minimum time interval between each make/break operation (ms)

a. Whether OGA drawing enclosed

b. Weight of complete 3 phase breaker for foundation design (kg)

c. Weight of heaviest part of breaker (kg)

d. Impact loading for foundation design

e. Seismic level for which breaker is designed

f. Minimum safety clearance from earthed objects

g. Noise level in (dB) at base of the breaker

h. Minimum clearance in air

i. Between live parts (mm)

ii. Live parts to earth (mm)

iii. Live parts to ground level (mm)

6 Constructional Details

a. Whether arcing contacts provided

b. Type and material of main contacts and arcing contacts

c. Contact pressure on main contacts (kg/cm2)

d. Contact separation in arcing position (mm)

e. Contact separation in open position (mm)

i. Main contacts

ii. PIR contacts

f. Whether pressure relief device for each of the gas chamber of SF6 CB provided

g. Rate of contact travel.

i. Opening (m/sec)

ii. Closing (m/sec)

h. Whether the making & breaking contacts are hermetically sealed

i. Type and capacity of device used to obtain uniform voltage distribution between breaks

j. Over voltage withstand capability of grading components (kV rms)

k. Number of auxiliary contacts per pole provided for Owner's use

l. Rated voltage of auxiliary contacts (V)

m. Current rating of auxiliary contacts

i. Continuous (A)

ii. DC breaking with 20 ms time constant (A)

n. Whether auxiliary contacts silver plated

o. Whether support structure included in supply

p. Height of support structure

q. Material of support structure

r. Standard to which the design of support structure conform

s. Whether foundation bolts for breakers and cabinets included in scope of supply

7 Detailed Literature

a. Whether the following are enclosed.

i. Type test reports as per IEC-56

ii. Factory test report and/or field test report incase of reactor switching duty

iii. Details of operating mechanism

iv. Drawing of breaker of support structure.

v. Calculations for compressed air plant sizing

vi. Details of SF6 gas filling, evacuating and testing plant

vii. Details of SF6 gas leak detector

viii. Precautions in use of SF6 gas

ix. Leaflets & literature bringing out salient features of equipment offered.

x. Schematic diagrams of switching mechanism for closing resistor showing the duration of insertion along with calculation for thermal rating of closing resistors.

xi. Whether drawings showing contacts in close, arc initiation, full arcing, arc extinction and open position enclosed

xii. Method of checking of Voltage distribution devices at site enclosed

xiii. Details along with a complete catalogue of operation analyzer enclosed

xiv. Data on capabilities of circuit breaker in terms of time and number of operations at duties ranging from 100% fault currents to load currents of the lowest possible value without requiring any maintenance or checks.

xv. Effects of non simultaneity between contacts within a pole or between poles and also show how it is covered in the guaranteed rated break time

xvi. Details and type of filters used in interruptor assembly and also the operating experience with such filters

xvii. Curves supported by test data indicating the opening time under close open operation with combined variation of trip coil voltage and pneumatic/hydraulic pressure.

xviii. All duty requirements specified along with adequate test reports.

CIRCUIT BREAKER - CONTROL CABINETS :

1 Manufacturer's Name

2 Indoor/Outdoor application

3 Design ambient air temperature (oC)

4 Standards applicable

5 Thickness of sheet steel (mm) and whether cold rolled or hot rolled

6 Degree of protection provided

7 Bill of material for all the equipment mounted on control cabinet giving the following details:

a. Make and type

b. Applicable Standard

c. Voltage rating

d. Current rating

e. Duty class. If applicable

f. Manufacturer's catalogue No.

g. Total heat load of cabinet (for purpose of ventilation requirement)

8 Colour of finish paint IS : 5

9 Control Wiring

a. Size of conductor

i. For CT circuits

ii. For other circuits

b. Conductor Solid/Stranded

c. Number of Strands/conductor

10 Terminal Blocks

b. Current rating

i. Power terminals (A)

ii. Other terminals (A)

11 Space Heater Rating at 240 V AC

12 Control cabinet drawing showing the following:

a. Outline dimensions, floor opening, floor/ wall/ pedestal fixing arrangements, weights etc.

b. Front view, inside view showing the mounting arrangement of various equipment.

13 Schematic/wiring diagram of control cabinet enclosed

14 Interconnection drawing showing cable, connections to the control cabinet enclosed

15 Type test report to verify degree of protection enclosed

16 Details of terminal rows:

i. Whether arranged vartical or horizontal

ii. Clearance from adjacent components.

iii. Distance between rows.

iv. Whether transparent protection cover provided.

CIRCUIT BREAKERS - TERMINAL CLAMPS AND CONNECTORS

1 Manufacturer's Name

2 Applicable Standards

4 Material of connector

b. Bolts & Nuts

c. Spring Washers

5 Rated Current

6 a. Rated terminal load (kg)

b. Factory of Safety

7 Minimum thickness of any part (mm)

8 Weight of clamp complete with hardware (kg)

9 Type test reports as per IS enclosed

10 OGA drawing enclosed.

CIRCUIT BREAKERS - BUSHING/SUPPORT INSULATOR :

1 Manufacturer's Name

3 Applicable Standards

ii. Diameter (Top)

iii. Diameter (Bottom)

5 Total creepage distance (mm)

6 Rated voltage (kV)

7 Power frequency withstand voltage for 1 minute (kVrms) dry and wet

8 1.2/50 micro sec. impulse withstand voltage (kVp)

9 250/2500 micro sec. switching impulse withstand voltage (kV p) dry and wet

10 Corona Extinction voltage (k V)

12 Maximum allowable span (mm)

13 Cantilever Strength (kg)

14 OGA drawing enclosed.

1 Manufacturer's Name & address

2 Equipment driven by motor

4 Country of origin

7 Type of enclosure and method of cooling

8 Applicable standard to which motor generally conforms

9 Type of mounting

10 Direction of rotation as viewed from non-driving end

11 Standard continuous rating at 40 deg. C ambient temperature as per Indian Standard (KW)

12 Derated rating for specified Normal condition ie., 50 deg. C ambient temperature (KW)

13 Rated Voltage (V)

14 Rated speed at rated voltage and frequency(rpm)

15 Full load current at rated voltage and frequency (A)

16 Power factor at rated load

17 Efficiency of motor at rated voltage and frequency (with out any tolerance) at

i. Density duty point(%)

ii. 100% of full load (%)

18 Starting current (Amps) at

i. 100% Voltage

ii. 85% Voltage

a) Starting (Kg-Metre)

b) Pull up (Kg-Metre)

c) Pull Out(Kg-Metre)

20 Stator winding Insulation

i) Class & type

ii) Tropicalised

iii) Temperature rise over specified ambient of 50 deg. C ( deg. C)

iv) Method of temperature measurement

21 Stator winding connector

22 Number of star terminals brought out

23 Type of terminal box for stator leads

24 Bearing type

ii. Non Driving End

25 Type of Construction of Rotor

26 Weight of Motor

i. Stator (Kg.)

ii. Rotor (Kg.)

iii. Total Weight (Kg.)

27 Type Test Report Enclosed

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

GUARANTEEED TECHNICAL PARTICULARS FOR LATTICE TYPE MOUNTING STRUCTURES

(Bidder should indicate the guaranteed technical data of all equipments / materials for each type of rating separately)

Mounting Structures

1 Standars adopted

i. Properties of section

ii. Bolts & Nuts

iii. Galvanising

2 Minimum Sheared edge distance (mm)

3 Minimum Rolled edge distance (mm)

4 Quality of Zinc used for galvanising

5 Maximum percentage increase in structure weight due for galvanisation

6 Quantity of Zinc required for galvanisation per MT of structurals

7 Size of bolts and nuts (including foundation bolts & nuts for support structure)

iii. Foundation Bolts

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

ISOLATORS AND TERMINAL CONNECTORS

(Bidder to indicate technical data for each type of rating separately)

Isolators and Terminal connectors ratings

a. Name of the Manufacturer

b. Country of Manufacture

c. Manufacturer's type designation

d. Standard applicable for isolators and earthing switches

e. Rated Voltage Ur (kV)

f. Rated Current Under site conditions (A) at 50oC ambient

g. Rated frequency (Hz)

h. Number of poles

i. Whether all 3 poles are ganged mechanically

j. Pole to pole spacing

k. Type of installation

2 Guaranteed Ratings

a. Rated short time current of isolator for Is (kA) and dynamic current (kAp)

b. Opening time of isolator and earth switch (s)

c. Closing time of isolator and earth switch (s)

d. Temperature rise over 50oC ambient temperature corresponding to maximum continuous current (oC)

3 Dielectric withstand capacity of completely assembled isolator/isolator and earth switch

a. One minute dry power freq. Withstand test voltage (kV ms)

i. Against ground (kV rms)

ii. Across isolating distance (kV rms)

b. 1.2/50 micros a impulse withstand test voltage

i. Against ground (kVp)

ii. Across isolating distance (k Vp)

c. 250/2500 micros switching surge withstand test voltage (dry & wet)

i. Against ground (kVp)

ii. Across isolating distance (kVp)

d. Corona extinction voltage (k V rms)

e. Radio interference level at 1.1 Ur/ /3 (in micro volts) at 1.0 MHz

f. Total creepage distance to ground (mm)

4 Operating Mechanism

A. For Main Blades

a. Type of motor operating / manually driven mechanism

b. Manufacturer's Type / designation

c. Rated torque of the mechanism

d. Type and rating of motor

B. For Earth Switches

a. Type of motor operating / manually driven mechanism

b. Manufacturer's type designation

c. Rate troque of the mechanism

d. Type and rating of motor

4.1 Interlocks:

a. Whether mechanical/constructional interlock between isolator and earth switch provided.

b. Details of electrical interlock enclosed for

ii. Earth Switch

c. Arrangement provided to prevent electrical or manual operation unless interlock conditions are satisfied whether interlock coil is continuously rated

d. Rated DC control voltage and variation allowed

e. Power consumption (W)

a. Rated DC control voltage (V)

b. Limits of voltage

c. Power consumption of control coils (W)

5 Constructional Features

a. Minimum clearance in air

i. Between phases (mm)

ii. Between live parts to earth (mm)

iii. Distance between terminals of same phase (mm)

b. Whether position of earth switch can be interchanged at site to either side of pole

c. Minimum clearance between live part and earth switch blade throughout the entire operational are of earth switch (mm)

d. Terminal pad details

i. Diameter & length

ii. Material of pad

e. Insulator data

iii. No. of insulator stacks / phase

iv. No. of insulators/stack

f. Main Contracts

i. Type of contacts

ii. Contract area (cm2)

iii. Material of contacts

iv. Contact pressure (kg / cm2)

v. Maximum current density under normal current carrying capacity (A/cm2)

vi. Thickness of silver plating

g. Number of auxiliary contacts on isolator/pole for owner's use

h. Number of auxiliary contacts on earth switch pole for Owner's use

i. Auxiliary contacts

i. Rated voltage (V)

ii. Rated Continuous current (A)

iii. Rated Dc breaking current with 20 ms time constant (A)

j. Mounting dimenstions of isolators

i. Distance between supports

ii. Top dimensions of support

k. Height from mounting plane to top of terminal stud

l. Whether cable glands required included in the scope for inter pole cabling to be done by the Owner.

Whether the following are enclosed :

a. Type test reports as per IEC 129

b. OGA drawings for isolator with & without earth switches

c. Operation manual for isolators

d. Details of motor operating / manually driven mechanism

e. Recommended drawing for mounting details for isolator and drives.

f. Leaflets & literature bringing out salient features of equipment offered.

g. Details of constructional interlock

CONTROL CABINETS

1 Manufacturer's Name

2 Indoor / Outdoor application

3 Design ambient air temperature (oC)

4 Standards applicable

5 Thickness of sheet steel (mm) and whether cold rolled or hot rolled

6 Degree of protection provided

7 Bill of material for all the equipment mounted on control cabinet giving the following details :

a. Make and Type

b. Applicable Standard

c. Voltage rating

d. Current rating

e. Duty class, if applicable

f. Manufacturer's catalogue No.

g. Total heat load of cabinet (for purpose of ventilation requirement)

8 Colour of finish paint IS : 5

9 Control Wiring

a. Size of conductor

i. For CT circuits

ii. For other circuits

b. Conductor Solid / Stranded

c. Number of Stranded/conductor

10 Terminal Blocks

b. Current rating

i. Power terminals (A)

ii. Other terminals (A)

11 Space Heater Rating at 240 V DC

12 Control cabinet drawing showing the following

a. Outline dimensions, floor opening, floor/wall/pedestal fixing arrangements weights etc.,

c. Front view, inside view showing the mounting arrangement of various equipment

13 Schematic / wiring diagram of control cabinet enclosed

14 Interconnection drawing showing Owner's external cable, connections to the control cabinet enclosed Isolators & Terminal Connectors

15 Type test report to verify degree of protection enclosed.

16 Details of terminal rows

i. Whether arranged vertical or horizontal

ii. Clearance from adjacent components

iii. Distance between rows

iv. Whether transparent protection cover provided.

16 TERMINAL CLAMPS AND CONNECTORS

1. Manufacturer's Name

2. Applicable Standards

4. Material of connector

b. Bolts & Nuts

c. Spring washers

5. Rated Current

6. a. Rated terminal load (kg)

b. Factor of safety

7. Minimum thickness of any part (mm)

8. Weight of clamp complete with hardware (kg)

9. Type test reports as per IS enclosed.

10. OGA drawing enclosed

BUSHING / SUPPORT INSULATOR

1 Manufacturer's Name

2 Type test report to verify degree of protection enclosed.

3 Applicable Standards

i. Diameter (Top)

ii. Diameter (Bottom)

5 Total Creepage distance (mm)

6 Rated voltage (kV)

7 Power frequency withstand voltage for 1 min. (k V rms) dry and wet

8 1.2/50 micro sec. Impulse withstand voltage (kVp)

9 250/2500 micro sec. Switching impulse withstand voltage (kVp) dry and wet

10 Corona Extinction voltage (k V)

12 Max. allowable span (mm)

13 Cantilever Strengthh (kg)

14 OGA drawing enclosed

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

GUARANTEED TECHNICAL PARTICULARS FOR RIGID BUS & ACCESSORIES

(Bidder should indicate the guarantteed technical data of all equipments/materials for each type of rating separately)

1.00 Tubular Bus Conductor

1.01 manufacturers Name and address

1.01 Applicable Standards

1.03 Size of tubular Bus Conductor (mm)

a Standard pipe size (IPS)(mm)

b Outside diameter (mm)

c Tolerance on outside diameter

d Thickness (mm)

e Tolerance on Thickness

1.04 Moment of Interia (mm4)

1.05 Section Mudulus (mm3)

1.06 Radius of gyration (mm)

1.07 Natural frequency of vibration for the Site condition (c/s)

1.08 Reactance per phase for configuration at site (ohms)

1.09 Conducivity of IACS (%)

1.10 DC Resistance of 2033

1.11 Constant mass temperature co-efficient of resistance

1.12 Weight (Kg/m)

1.13 Current rating at site conditions (Amps)

1.14 Tubular bus conductor temperature Due short circuit (oC)

1.15 Final allowable tabular bus conductor Temperature due to short circuit (oC)

1.16 Short circuit current rating for 1 sec. duraion (kA)

1.17 Critical disruptive (Corona) voltage (Line o Neutral) KV)

1.18 Ratio inerference at rated voltage (micro volts m)

1.19 Yield srength at tensile stress of 1335 Kg/cm2 for aluminium tubular bus conductor (Kg)

1.20 Minimum braking strength at tensile stress of 1545 Kg/cm2 for aluminium tabular bus conductor (kg)

1.21 Deflection on tabular bus conductor for 13 span (mm)

1.22 Maximum transport length of tabular bus conductor (Meter)

1.23 Data Applicable to Bells

b Type of fiting (Internal/external)

2.00 Clamps and Connections 220KV 110KV 66KV 33KV

2.01 Manufacturers Name and address

2.02 Applicable standards

2.03 Application

2.04 Type of fiting (Internal/external)

2.05 For connection to

a Conductor size and arrangement

b Equipment terminal and arrangement

2.06 Material (state percentage composiion of consiuents and impurities present)

b Bolts and Nuts

c Spring washers

d Liners, if any

2.07 Rated current (A)

2.08 Maximum temperature rise over reference ambient temperature when carrying rated current (oC)

2.09 Rated terminal load and factor of safey (Kg)

2.10 Minimum thickness of any part (mm)

2.11 Weight of clamp complete with hardware (Kg)

2.12 Machine accuracy for matting surface

2.13 Service (Indoor/Outdoor)

3.00 Marshalling Kiosk 220kV 110kV 66kV 33kV

3.01 Manufacturers Name and address

3.02 Indoor/Outdoor application

3.03 Design ambient air temperature

3.04 Thickness of sheet steel (mm)

3.05 Degree of protection provided

3.06 Bill of material for all equipment mounted in marshalling Kiosks giving following details:

b Applicable Standards

c Voltage rating

d Current rating

e Duty class if applicable

f Manufacturers catalogue No.

g Total heat load of Kiosk (for purpose of ventilation requirement)

3.07 Colour of finish paint (as per IS:5)

3.08 Busbars 220kV 110kV 66kV 33kV

b Temperature rise at rated current over specified ambient temperature (o C)

c Continuous current rating (A)

d Short circuit current rating for one sec. (KA)

3.09 Control wiring

a Size of conductor (mm2)

i. For CT circuits

ii. For other circuits

b Conductor (solid/stranded)

3.10 Space Heater Rating at 240 V Ac

3.11 Marshalling Kiosk drawing enclosed showing the following:

a Outline dimensions floor opening Floor/wall pedestal fixing arrangements, weight etc. (YES/NO)

b Front view and inside view showing the mounting arrangments of various equipments. (YES/NO)

3.12 Schematic wiring diagram of marshalling kiosk enclosed (YES/NO)

3.13 Interconnecion drawing showing Employer's external cable connection to the marshalling Kiosk enclosed. (YES/NO)

3.14 Type test report to degree of protection enclosed.

3.15 Terminal blocks

a Make and type

b Current rating

i Power Terminal (A)

ii Outer Terminal (A)

GUARANTEED TECHNICAL PARTICULARS OF CLAMPS AND CORONA BELLS ASSOCIATED WITH ALUMINIUM PIPE:

2 Type of clamps, purpose and size of the pipe

3 Type of corona bell (internal fitting or external fitting)

4 Standards applicable

5 Material (state percentage composition)

ii Bolts and Nuts

iii Spring washers

6 Current rating (amps)

7 Maximum thickness of any part (mm)

8 Minimum thickness of any part (mm)

9 Size of bolts used in each case

11 List of type tests enclosed

12 Year in which type test conducted

13 List of routine tests conducted

14 List of drawings enclosed

Note: Pariculars in respect of different clamps may be furnished separately or in tubular columns in the annexure.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

GUARANTEED TECHNICAL PARTICULARS FOR CURRENT TRANSFORMERS

(Bidder should indicate the guaranteed technical data of all equipments/materials for each type of rating separately)

Voltage Class and ratio of CT 66KV 66KV 66KV 66KV 66KV 11kV 11kV

Sl.No. PARTICULARS

1 Name of the manufacturer

2 Country of origin

3 Standard Governing specification

5 Manufacturer's type designation

6 a. Nominal system voltage KV

b. Highest system voltage KV

7 a, Rated primary current

b. Rated secondary current Amp

c. Rated transformation ratio Amp

8 Rated Secondary terminal Voltage at

i. Rated Current

ii. 10 Times the rated current

iii. 20 Times the rated current

9 Ratio of current Transformer

10 Number of Cores

11 Details of Core

i. Rated Burden

ii. Accuracy Class

iii. Accuracy limit factor

iv. Instrument Security factor

v. Knee point voltage at

vi. Secondary winding

resistance (Ret. In Ohms)

vii. Magnetising current at Vk/4

i. Rated Burden

ii. Accuracy Class

iii. Accuracy limit factor

iv. Instrument Security factor

v. Knee point voltage at

vi. Secondary winding

resistance (Ret. In Ohms)

vii. Magnetising current at Vk/4

i. Rated Burden

ii. Accuracy Class

iii. Accuracy limit factor

iv. Instrument Security factor

v. Knee point voltage at

vi. Secondary winding

resistance (Ret. In Ohms)

vii. Magnetising current at Vk/4

i. Rated Burden

ii. Accuracy Class

iii. Accuracy limit factor

iv. Instrument Security factor

v. Knee point voltage at

vi. Secondary winding

resistance (Ret. In Ohms)

vii. Magnetising current at Vk/4

i. Rated Burden

ii. Accuracy Class

iii. Accuracy limit factor

iv. Instrument Security factor

v. Knee point voltage at

vi. Secondary winding

resistance (Ret. In Ohms)

vii. Magnetising current at Vk/4

12 Current error at rated primary current

13 Phase displacement at rated primary current

14 Composite error at rated accuracy limit primary current in %

15 Rated short time current and duration

a. Thermal ( I th) KA (rms) for 1 sec KA

b. Dynamic (I dyn) (peak)

16 Temperature rise of the windings (by resistance method) over an ambient temperature of 45oC

a)At rated current Deg C

b)At 100% overload for 5 minutes Deg C

17 Partial discharge level

18 Particulars of windings

a. Primary winding :

ii. No.of turns

iii.Current density at rated current Amp / Sq.mm

iv. Size of conductor

v. class of insulation

b. Secondary winding

ii. No. of turns

iii.Current density at rated current Amp / Sq.mm

iv. Size of conductor

v. Class of insulation

vi. Resistance computed to 75 deg C Ohm

vii. Insulating material used

c. Rated insulation levels :

i. One minute power withstand voltage KV (rms)

ii. Intersection withstand voltage of primary windings KV (rms)

iii. Impulse withstand voltage KV (rms)

19 Particulars of core :

ii. Flux density :

a. At rated primary current Tesla

b. At 15 times rated primary current Tesla

iii. Thickness of steel lamination mm

iv. Whether CRGO steel stampings are used?

v. Watt loss/Kg. of steel

vi. Knee point e.m.f

20 Particulars of porcelain housing / bushing

i. Specification to which it confirms

ii. Name of manufacturer

iii. Power frequency withstand voltage for one minute

a. Dry KV (rms)

b. Wet KV (rms)

iv. Dry lightning impulse withstand voltage 1.2/50 micro sec. Wave shape KV (rms)

v. Visible power frequency discharge voltage KV (rms)

vi. Creepage distance in air

a. Protected mm

vii. Weight of porcelain housing / bushing kgs

21 Overall dimensions :

i. Total weight of copper used

a. Primary winding kg

b. Secondary winding kg

ii. Weight of core kg

iii. a. Quantity of insulating oil liters

b. Weight of insulating oil kgs

iv. Total weight kgs

23 Particulars of terminal connector

i. Name of the manufacturer

ii. Rated current Amps

iii. Temperature rise above an ambient of 45 deg.c

a. At rated current Deg C

b. At 150% of rated current for 15 min Deg C

CONTROL CABINET :

1 Manufacturer's Name

3 Design ambient air temperature (oC)

4 Standards applicable

5 Thickness of sheet steel (mm) and whether cold rolled or hot rolled

6 Degree of protection provided

7 Bill of material for all the equipment mounted on control cabinet giving the following details

b. Applicable Standard

c. Voltage rating

d. Current rating

e. Duty class, if catalogue No.

f. Manufacturer's catalogue No.

g. Total heat load of cabinet (For purpose of ventilation requirement)

8 Colour of finish paint IS : 5

9 Control Wiring

a. Size Conductor

i. For CT circuits

ii. For other circuits

b. Conductor Solid Stranded

c. Number of Strands / conductor

10 Terminal Blocks

b. Current terminals (A)

i. Power terminals (A)

ii. Other terminals (A)

11 Space Heater Rating at 240 VAC

12 Control cabinet drawing showing the following

a. Outline dimensions, floor openings, Floor/wall/pedestal fixing arrangements, Weights etc.

b. Front view, inside view showing the Mounting arrangement of various Equipment.

13 Schematic / wring diagram of control Cabinet enclosed

14 Interconnection drawing showing cable, Connections to the control cabinet enclosed.

15 Type test report to verify degree of Protection enclosed

16 Details of terminal rows

i. Whether arranged vertical or horizontal

ii. Clearance from adjacent components

iii. Distance between rows

iv. Whether transparent protection cover provided

SUPPORT INSULATOR

1 Manufacturer's Name

3 Applicable Standards

ii. Diameter (Top)

iii. Diameter (Bottom)

5 Total creepage distance (mm)

6 Rated voltage (KV)

7 Power frequency withstand voltage for 1 min (KV rms) dry and wet

8 1.2/50 micro sec. Impulse withstand voltage (KVP)

9 250/2500 micro sec. Switching impulse

10 Corona Extinction voltage (KV)

12 Max. allowable span (mm)

13 Cantilever Strength (Kg)

14 OGA drawing enclosed

TERMINAL CLAMPS AND CONNECTORS

1 Manufacturer's Name

2 Applicable Standards

4 Material of connector

b. Bolts & Nuts

c. Spring washers

5 Rated Current

6 a. Rated terminal load (Kg)

b. Factor of safety

7 Minimum thickness of any part (mm)

8 Weight clamp complete with hardware (Kg)

9 Type test report as per IS enclosed

10 OGA drawing enclosed

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

GUARANTEED TECHNICAL PARTICULARS FOR ACSR CONDUCTOR

(Bidder should indicate the guaranteed technical data of all equipments/materials for each type of rating separately)

Sl. No. Bidders Name

ASCR Conductor ASCR Conductor ASCR Conductor ASCR Conductor ASCR Conductor

Description Unit

MOOSE COYOTE LYNX DRAKE PANTHER

1 Name & Address of manufacturer

2 PARTICULARS OF RAW MATERIALS

a Minimum Purity of aluminium %

b Maximum Copper content %

2.2 Steel Wires/Rods

c Phosphorous %

a Minimum Purity of zinc %

3 STEEL STRANDS

b Maximum Copper content mm

3.2 Minimum Braking load of strand KN

3.3 Maximum Resistance of 1m length of strand at 20 deg C Ohm

4 STEEL STRANDS AFTER STRADING

4.2 Minimum Braking load of strand KN

4.3 Galvanising

a Minimum weight of zinc coaing per sqm. Of uncoated wire surface Gm

b Minimum number of one minute dips that the galvanised strand can withstand in the standard preece test Nos.

c Min.No. of twists in a guage length equal to 100 times dia of wire which the strand can withstand in the torsion test. Nos.

5 ACSR Conductor

5.1 UTS of conductor KN

5.2 Lay ratio of conductor

a Outer steel layer

b 12 wire aluminium layer

c 18 wire aluminium layer

d 24 wire aluminium layer

5.3 DC resistance of conducor at 20 deg. C Ohm/km

5.4 Minimum Corona Extincion Voltage (line to ground)

5.5 RIV at 1MHz

a a 305KV (rms) under dry conditions microvolts

5.6 Standard length of conductor in one drum M

5.7 Direction of lay for outside layer NA

5.8 Linear mass of the conductor

a Standard Kg/km

b Minimum Kg/km

c Maximum Kg/km

6 Drum is as per specificaion Yes/No

7 No. of cold pressure butt welding equipments available at works Nos.

1 Name & Address of manufacturer

2 PARTICULARS OF RAW MATERIALS

2.1 Steel Wires/Rods

c Phosphorous %

a Minimum Purity of zinc %

3 STEEL STRANDS

3.2 Minimum Braking load of strand KN

3.3 Galvanising

a Minimum weight of zinc coating per sqm. Of uncoated wire surface Gm

b Minimum number of one minute dips that the galvanised strand can withstand in the standard preece test Nos.

c Min. no. of twists in a guage length equal to 100 times dia of wire which the strand can withstand in the torsion test. Nos.

4.0 STRANDED EARTHWIRE

4.1 UTS of conductor KN

4.2 Lay length of outer seel layer

4.3 DC resistance of conducor at 20 deg. C Ohm/km

4.4 Standard length of conductor in the drum Mtrs

4.5 Direction of lay for outer layer NA

4.6 Linear mass of earth wirer

c Minimum Kg/km

5.0 Drum is as per specificaion Yes/No

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

GAURANTEED TECHNICAL PARTICULARS FOR VOLTAGE TRANSFORMERS (COMMON TO 110 KV, 66 KV AND 33 KV CLASS)

(Bidder should indicate the guaranteed technical data of all equipments / materials for each type of rating separately)

Class of Voltage Transformers 110KV 66KV 33KV

2 Manufacturer's type and designation

3 Rated primary voltage

4 No.of secondary winding

5 Rated secondary voltage

i. Winding No.I

ii. Winding No. II

iii. Winding No. III

i. Winding No.I

ii. Winding No.II

iii. Winding No.III

7 Accuracy Class

i. Winding No.I

ii. Winding No. II

iii. Winding No.III

8 Maximum ratio error with rated burden and 9% normal primary voltage for secondary winding.

9 Maximum phase angle error with rated burden and 5% normal primary voltage for secondary winding

10 Grade of oil

11 Temperature rise at 1.2 times rated voltage with rated burden

12 Rated voltage factor and time

13 Temperature rise for

14 One min. power frequency withstand test (dry) voltage

15 One min. power frequency withstand test (wet) voltage.

16 1.2 /50 micro sec. Impulse wave withstand test voltage

17 One min. power frequency withstand voltage on accessories.

18 Weight of oil

19 Total weight

20 Overall dimensions

21 Mounting details

22 Surface treatment

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

GUARANTEED TECHNICAL PARTICULARS FOR POST INSULATORS AND DISC INSULATORS

(Bidder should indicate the guaranteed echnical data of all equipments/mzaterials for each type of rating separately)

Post Insulators & Disc String Insulators

1.00 POST INSULATORS 245KV 123KV 72.5KV 36KV

1.01 Manufacurer's name and Address

1.02 Type of Insulators Units

1.03 Applicable Standard

1.04 No. of Units per Sack

1.05 Whether corona ring provided or not (Yes/No)

1.06 Diameter (mm)

1.07 Bolt circle diameter (mm)

1.08 Spacing bewteen two units (mm)

1.09 Creepage Distance

b Protected (mm)

1.10 Power frequency wihstand volage of insulator

i. Dry (KV rms)

ii. Wet (KV rms)

b One complete stack

i. Dry (KV rms)

ii. Wet (KV rms)

1.11 1.2/50 micro sec.impulses withstand voltage

b Complete stack

1.12 Visual discharge volage for falling power frequency voltage for complete stack

1.13 Radio interference voltage of compete stack

i Test Voltage(KV rms)

ii Radio interference voltage (micro volt)

1.14 Weight of complete stack (Kg)

1.15 Cantilever Strength

ii Underhung (Kg)

b Complete stack

ii Underhung (Kg)

1.16 Tensile Strength (Kg)

1.17 Torsional Strength (Kg.m)

1.18 Compression Strength (Kg)

1.19 250/2500 micro second switching surge withstand voltage

i Dry (KV Peack)

ii Wet (KV Peack)

b Complete stack

i Dry (KV Peack)

ii Wet (KV Peack)

1.20 Whether shed profile of insulaor is conforming to IEC-815? (Yes/No)

1.21 Whether calculation characterising shed profile as per IEC-815 are enclosed with bid? (Yes/No)

1.22 Wheher offered BPI is alternate shed type?

1.00 INSULATOR STRINGS 220KV 110KV 66KV 33KV

1.01 Manufacturer's Name

1.02 Type of string

a Single/Double

b Suspension/Tension

1.03 Applicable standards

1.04 Type of Insulators

a Ball & socket/oher

b Whether fog type

1.05 Insulating Material

1.06 No. of unis per string

1.07 Size of each unit

a Diameter of disc (mm)

b Spacing between adjacent units (mm)

a Each disc (Kg)

b Complete String (mm)

1.09 Creepage Distance

a Each disc (mm)

b Complete String (mm)

1.10 power frequency withstand voltage of the complete string with corona control ring

1.11 Lightening impulse withstand voltage of the complete string for both positive and negative

1.12 Switching surge withstand voltage of the complete string with corona ring.

1.13 Power frequency puncture withstand voltage of each Disc (KV rms)

1.14 Electro Mechanical strength (KG) of each disc.

1.15 Minimum corona extinction voltage level of the complete string with corona ring (Dry condition)

1.16 RIV level of the complete string with corona control ring shall be below 1000 micro at 1 MHz when subjected to a test voltage indicated against clause 1.15 above. (Dry condition)

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

GUARANTEED TECHNICAL PARTICULARS FOR INSULATOR HARDWARE AND CLAMPS

(Bidder should indicate the guaranteed technical data of all equipments/materials for each type of rating separately)

220KV 110KV 66KV 33KV

1.00 Insulator hardware

1.01 Manufacturer's Name and address

1.02 Applicable Standards

b Nuts bolts and washers

e Strain and suspension/drop clamp (kg)

1.04 Ultimate Strength

a Complete assembly (kg)

b Suspension /drop clamp (kg)

c Strain clamp (kg)

d D-shackle (kg)

e Ball eye (kg)

f Ball clevis (kg)

g Clevis eye (kg)

h Socket eye (kg)

I Socket clevis (kg)

j Yoke Plate (kg)

1.05 Magnetic power loss at

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2025-26/TL/WORK_INDENT3258

Providing 66kV SC Link line between existing 66/11kV Sub-station Haradanahalli to the existing 66/11kV Sub-station Vaderahalli for a distance of 12.785kms with Panther conductor and construction of 1 no. of 66kV Terminal Bay at 66/11kV Haradanahalli Sub-station & 1 no. of 66kV Terminal Bay at 66/11kV Vaderahalli Sub-station in Nagamangala Taluk, Mandya District on Total Turnkey basis including supply of all matching materials/equipments and erection (including civil works) of all materials/equipments, testing and commissioning.

GUARANTEED TECHNICAL PARTICULARS FOR SURGE ARRESTORS

(Bidder should indicate the guaranteed technical data of all equipments / materials for each type of rating separately)

Surge Arrestors 96KV 60KV 30KV 9KV

SURGE ARRESTORS

a. Manufacturer's Name

b. Manufacturer's type / designation

c. Applicable standards

ELECTRICAL CHARACTERISTICS

2 A. Arrester class and Type

b. Rated arrester voltage (kV)

c. Maximum continuous operating voltage (COV) at design ambient temeprature

d. Nominal discharge current (8/20 micro sec. Wave) (kA)

e. i. Minimum discharge capacity (kJ/kV) referred to rated voltage of minimum of discharge characteristics

ii. Line discharge class, as per IEC

f. Maximum equivalent front of waver protection level (discharge voltage with 0.5 * 1.5 micro sec, 10 kA impulse current).

g. i. Minimum switching surge residual voltage at 1 kA (kV p)

ii. Maximum switching surge residual voltage at 1 kA(kVp)

h. Maximum residual voltage for 8/20 micro sec. Current wave

i. At 50% nominal discharge current (kVp)

ii. At 100% nominal discharge current (kVp)

iii. At 200% nominal discharge current (kVp)

i. One minute power frequency (dry) withstand Voltage of arrester (k Vrms)

j. Impulse withstand test voltage of arrester housing with 1.2/50 micro sec. Wave (kVp)

k. Impulse current withstand

i. High current short duration (4/10 micro sec. Wave) kAp

ii. Low current long durationn (A peak)

l. Maximum internal ionisation at 50 Hz voltage equal to

m. Reference voltage and corresponding reference current of arrester.

n. Maximum internal leakage current at (mA).

iii. COV at 150oC

iv. Reference voltage

o. Pressure relief class

p. Are the protection levels affected by pollution of external insulation

q. Energy absorption capacity in kJ per operation of the arrester, during a switching surge discharge.

r. Maximum amount of energy that may be dispatched into the arrester during discharge into the arrester during discharge assuming that discharge takes place within 1 min period and state the switching surge current.

s. Internal pressure required to operate pressure relief device as a percentage of burst pressure of porcelain

t. Dynamic over voltage withstand kVp

ii. For 0.01 sec.