Renovation and repair of old School building

Amount

Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. BCD 5.10.1

Dismantling R.C.C. work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. BCD 5.10.3

Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. BCD 5.10.4

Taking down old shutters of doors and window shutters including stacking of servicable materials and disposal of unservicable materials with all leads -do- all comp. BCD 5.10.10.

Taking down old Chaukhat of doors including stacking of servicable materials and disposal of unservicable materials with all leads -do- all comp. BCD 5.10.11

Taking down old Chaukhat of windows including stacking of servicable materials and disposal of unservicable materials with all leads -do- all comp. BCD 5.10.12

Providing designation 75-A brick work in C.M. (1:6) in super-structure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints,cost of screening materials raking out joints to 15mm depth , curing, taxes & royalty all complete as per building specification & direction of E/I. BCD 5.2.3

Providing R.C.C. M-20 with nominal mix of 1:1.5:3 in BEAM with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening , mixing cement concrete in mixer, placing in position vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of Engineer Incharge. BCD 5.3.11

Centering and shuttering including strutting, propping etc. and removal of form for Lintel,beams. 5.3.17.5

Providing T.M.T. Reinforcement FE 500 of following dia Rods as per approved design and drawing including carriage of M.S. Rods of (Straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction and direction of E/I. (APPROVED BRAND - TATA/ SAIL) BCD 5.5

5.5.4 8MM DIA. = 30 % OF TOTAL

5.5.5 A 10 MM DIA. = 30 % OF TOTAL

5.5.6 B 12 MM -16 MM DIA. DIA. = 40 % OF TOTAL

Providing 6mm cement plaster(1:4) in ceiling with clean course sand of FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I . BCD 5.7.6

Providing 19 mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. BCD 5.7.15

Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 with floating coat of neat cement in skirting including rounding of junctions with floor, curing, taxes and royalty with all complete as per building specification and direction of E/I.BCD 5.6.10

Providing P.C.C. M-15 with nominal mix of (1:2:4) in Foundation with approved quality of stone metal grade III (53 to 22.4 mm size) and clean coarse sand of F.M. 2.5 to 3 including screening, , mixing cement concrete in mixture, placing in position, vibration, striking, curing, taxes and royalty all complete as per building specification & direction of E/I. BCD 5.3.1.2

Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm . BCD 5.6.28

Providing and laying 25 mm thick kotah stone tiles in risers of steps,skirting and pillars of approved texture,size and colour over-do- all comp. (iv) 600x600 mm size. BCD 5.6.20

Providing 12 mm Thk. cement plaster(1:6) on inside walls with clean course sand of FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I BCD 5.7.3

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the urface evn and smooth. DSR 13.26

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over a new surface including preparing the plastered surface by rubbing smooth, with pumice stone or fine sand paper applying putty wherever required scalfolding. washing of floors and taxes. all complete as per building specification and direc tion of E/I.BCD 5.8.20

Providing and applying white cement based putty of average 1 mm thickness over plastered surface to prepare the urface evn and smooth. DSR 13.80

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over a new surface including preparing the plastered surface by rubbing smooth, with pumice stone or fine sand paper applying putty wherever required scalfolding. washing of floors and taxes. all complete as per building specification and direc tion of E/I.BCD 5.8.20

Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.) BCD 5.5.12

Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication,providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.BCD 5.5.29

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning,removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification) BCD 5.8.41

Providing two coats of painting with synthetic enamel paint with one coat of primer of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l. BCD 5.8.45

providing and fixing on wall face unplasticised - rigid P.V.C pipes -110 mm dia.. DSR 12.41.2

Providing and fixing Fan Hooks of 16 mm dia M.S. Bar 1m long ----- complete as per direction of E/I. BCD 5.5.13

CARRAIGE OF MATERIALS

(I)CEMENT

(II)SAND

(III)STONE CHIPS

(IV)BRICKS

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Energy 1.3.2 Group B Pg No-66

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.Energy 1.5 Pg No-66

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.Energy 1.7 Pg No-67

1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

1.7.11 4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required..Energy 1.21 Pg No-69

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Energy 1.24 Pg No-70

1.24.1 5/6 A switch

1.24.4 3 pin 5/6 A socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.Energy 1.25 Pg No-70

Supplying and fixing suitable size GI/PVC box of 121mm x 173mm x 48mm (6"x8") (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc as required. Energy 1.30 Pg No-71

Supplying and fixing following three pole and neutral sheet. MCB distribution board.415 V …. As required 4 way (8+12), TPN, vertical type, MCB DB, double door Energy 2.10.3 Pg No-77

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Energy 2.12.1 Single pole Pg No-78

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.Energy 2.14.1 Pg No-78 40A TPN

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal/ coke and salt ) as required Energy 3.2 Pg No-80

Supplying and laying 8 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.Energy 3.7 Pg No-80

Providing and fixing of lightning conductor finial, made of 25mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.Energy 4.2 Pg No-82

Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.Energy 4.4 Pg No-82

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)Energy 4.7 Pg No-82

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)Energy 4.8 Pg No-82

Providing and fixing of 1200 mm Ceiling Fan M-772 Pg No-52

Providing and fixing of 50/60 watt LED Flood Light Energy 9.2.2 Pg No-89

Providing and fixing of wall/ceiling light fixtures with 15/16W CFL lamp. Energy M-856 Pg No-54

EARTH WORK IN EXCAVATION IN FOUNDATION Trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth as obtained to a distance upto 50 M including all lift, leveling ramming the foundation trenches, removing roots of tree shrubs all complete as per approved design, building specification and direction of E/I

Extra earthwork in hard soil (vide classification of soil item -B) all complete as per specification and direction of E/I.

Providing coarse clean local SAND IN FILLING in foundation trenches or in plinth including ramming and watering in layer not exceeding 150 mm thick with all leads and 1.5 M lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of Engineer Incharge (Mode of measurement compacted volume)

Providing designation 75- A, BRICK FLAT SOLING joints filled with local sand including cost of watering,taxes and royalty all complete as per building specification and direction of Engineer Incharge.

Providing P.C.C. M-15 with nominal mix of (1:2:4) in Foundation with approved quality of stone metal grade III (53 to 22.4 mm size) and clean coarse sand of F.M. 2.5 to 3 including screening, , mixing cement concrete in mixture, placing in position, vibration, striking, curing, taxes and royalty all complete as per building specification & direction of E/I.

Providing R.C.C. M-20 with nominal mix of (1:1.5:3) in FOUNDATION and plinth with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including , mixing cement concrete in mixer, placing in position vibrating striking curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I.

Providing designation 75-A BRICK WORK in CM. (1:6) in SUPERSTRUCTURE with approved quality of clean coarse & of F.M. 2.5 including providing 10mm thick mortar joints cost of screening,racking out joints to 15 mm depth,curing, taxes and royalty all complete as per building specification and direction of Engineer Incharge

Providing R.C.C. M-20 with nominal mix of 1:1.5:3 in COLUMN with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening , mixing cement concrete in mixer, placing in position vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of Engineer Incharge.

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings. 5.3.17.1

Centering and shuttering including strutting, propping etc. and removal of form for Columns,pillars

Centering and shuttering including strutting, propping etc. and removal of form for in suspended floors,roofs. 5.3.17.3

Providing and fixing factory made PVC door frame of size 50x47 mm with a wall thickness of 5mm --do-- all comp.

Providing and fixing 30 mm thick factory made panel PVC door shutter --do-- all comp.

Providing and laying rectified glazed ceramic floor tiles 300x300 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Making plinth protection 50 mm thick of cement concrete (1:3:6) over 75 mm dry brick ballast ---- all complete as per direction of E/I.

Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I.

Supplying,fitting and fixing callapsible gate of approved size and make properly fabricated with vertical double channels 20X'10X2 mm. at 100mm. Centres and braced with M.S. flat diagonals 20 X 3mm, with top and bottom rails of T. iron 40x40x6mm with 38 mm dia steel pulleys complete with bolts, nuts, locking arrangements, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification arrd direction E/I.BCD 5.5.14 Pg No-120.

providing two coat of SNOWCEM of approved shde and make over coat of cement primer or a new surface....all complete job as per dirction of E/I.

Providing earth work in filling in compound by carriage all complete as per direction of E/I 5.1.10

Providing 125 mm thick reinfoced Brick work in C.M.(1:4) --- direction of E/I.

Providing 12 mm thick Plaster in C.M (1:4) with clean coarse sand of F.M.1.5 -- all complete as per specification and direction of E/I.

Providing 1.5 mm cement punning -- all complete as per specification and direction of E/I.

Constructing Soak Pit 1.2x1.2x1.2 m Filled With Bricks Bat Including S.W Drain Pipe 100mm Dia All Complete Job

Supplying fitting and fixing vitreous white glazed earthen ware I.W.C of Parry,Hindustan or any other I.S.S. approved make -----direction of E/I. 580 mm long with 12.5 lit low level PVC Cistern

providing and fixing C P.V.Cpipes -----direction of E/I.

25 mm dia nominal bore

External work - 40 mm dia nominal bore

providing and fixing on wall face unplasticised -PVC moulded fittings/accessories ------- direction of E/I.

single Tee with door (110x110x110 mm)

Single pushfit coupler

providing and fixing on wall face unplasticised - rigid P.V.C pipes -110 mm dia..

Supplying fitting and fixing vitreous white glazed earthen ware wash hand Basin of Hindustan,Parry or any other I.S.S. approved make -----direction of E/I. Flat Back or standing Corner .25mm to 40 mmnominal bore

Making connection of G.I.distribution branch with G.I. main -------direction of E/I. 25mm to 40 mmnominal bore

Providing and fixing gun metal non return valve of approved quality -------direction of E/I. 25mm nominal bore

Providing and fixing gun metal full way valvevalve of approved quality-------direction of E/I. 25mm nominal bore

Supplying,fitting and fixing the following items complete with all materials -------direction of E/I. mirror 600x450 mm

Providing and fixing C.P.brass bib cock of approved quality-------direction of E/I. (15 mm nominal bore) Bib cock long thread

Polythene water storage tank of mark with cover and suitable locking system in double layer

HYDT: Cost of Drilind 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up to Site. DWS Page no-56 Item no.-M1035

(a) From 0.00 M to 50.00 M below G.L.

(b) From 51.0 M to 150.00 M

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. DSR 23.3.3 200 mm nominal size dia

Development of tube well in accordance with IS : 2800 (part I) andIS: 11189, to establish maximum rate of usable water yield withoutsand content (beyond permissible limit), with required capacity aircompressor, running the compressor for required time till well isfully developed, measuring yield of well by "V" notch method or anyother approved method, measuring static level & draw down etc. bystep draw down method, collecting water samples & getting testedin approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessoriesetc., all as per requirement and direction of Engineer-in-charge. DSR 23.12

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia DSR 23.13.3

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200 mm clamp DSR 23.14.3

Supplying 100mm dis submersible pump sets confirming to 8034 and motor confirming to IS 9283 pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415 + 10, 3HP, 50 Hz, AC supply with cable guard, thurst carbon/fiber bearing to withstand entire hydraulic thurst, water proof winding shall be provided. The pump set shall be suitable for diret coupling Pump shall have suitable outlet as per manufacturers design. Anti thurst stream lined non return valve shall be provided with pump, 3 meter submersible copper conductor cable in single/double run shall be provided with each pump. Submersible pump set 100mm dia (with Polypropylene/Noryl Impeller) up to 20 stages 2 HP DWS M1055

Supply fitting and fixing of standered make starter pannel Board with arrangement of all necsssury protection including all taxes ,royalty etc D.O.L. starterwlth SS Enclosure wlth 380/41S Volt coit 5 to 10 H.P all complete job as per direction of E/I. DWS Item no.-M1065

Supplying fitting and fixing 3 crore 4 sqmm Flat copper conductor PVC sheathed & PVC insulated submersible cable FINOLEX / HEVELS make including all taxes ,royalty etc all complete job as per direction of E/I. DWS Item no.-M1062

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVCplain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. DSR 18.918.9.6 50 mm nominal outer dia Pipes

Goods & Services Tax (G.S.T.) @ 18%

Labour Cess @ 1%

AADARSH CONSTRUCTION (BID ID -683945)