Supply Installation Testing and Commissioning of facade illumination to Shri Devi Shantadurga Temple Gaonkarwada Bicholim Shree Devi Kelbai Mulgao and Providing surrounding illumination with decorative poles to Shree Devi Mahamaya Temple Bordem B

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directedwithin a lead of 50m.All kinds of soil

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing : All works upto plinth level

Centering & shuttering including Strutting, Propping & removal of forms for :Foundations, Footings, Bases for columns

Providing and laying in position ready mixed concrete (RMC) with usage of Ordinary Portland Cement manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V level. M-20 grade of concrete

Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.

Supply of 6M decorative Single Arm Cameroon pole with 72W Sabik Ø480mm Crown TM PC:- 6M height designer decorative single arm pole made in combination of steel pipe which is fabricated using 114 mm(+/-3%)dia grooved pipe x 4mm thick base section with Minimum height of 2000mm. The pole is to be provided with a surface mounting suitable base plate dia of 350 mm and suitable thickness as per IS standards and structural reports. Decorative knob on the top is made of cast aluminium in single piece of minimum height >360mm. The pole should be provided with an inbuilt junction box to fix Four-way connector and 6A MCB at the bottom - the inbuilt box should have a flush door of suitable size. The decorative pedestal to be mounted on a suitable size steel plate. The Pole shall be hot dip galvanized. . The suitable size foundation bolt shall be supply along with the pole of EN 8 grade. The manufacturer needs to provide a structural analysis for structural stability of the pole with the relevant IS standards IS 1239/1161/E250 needs to be clearly mentioned. The same needs to be confirmed in form of Test Certificates from the manufacturer. Internal wiring backelite sheet and MCB included Please refer the attached drawing no – Cameroon 6M SA TM Pole. Including 72W post top fixture suitable to mount 72W ± 10% with MCPCB of not less than 1.6 mm thickness and Cu of 35 microns and 2.5 Thermal conductivity for fixture. The LED used should be high power Epoxy LEDs (Make- Osram/bridgelux/nichia/cree) with Macadam </= 5 and Cri >/= 70 and CCT 4000K. The luminaire should have System efficacy (Lumens/watt) >110 lumens/watt. The luminaire should be having a warranty for a period of 5 years against any manufacturing defects. The manufacturer should have internal testing equipment’s especially 2m Integrating Sphere, IPX6, IK10, Humidity Chamber. The manufacturer shall submit the LM 80 report for LED used in the fixtures. Similar to Model no. Sabik Ø480mm Crown TM PC Clear SL. The luminaire should be RoHS compliant as per Government notification and with a valid BIS Number. Luminaire Make REYTEK, suncity, k-lite, dwarka casting, havells as directed by the engineer inchrage.

Street Light Panel: SITC of LT panel IP- 67 outdoor type,floor mounted Panel, shall be suitable for 415 V, 3 phase, 4 wire, 50Hz Supply system. With 3 phase energy meter and 63A TPN MCB as incommer and 11 nos of 16 A TPN MCB as outgoing with 3 numbers of microcontoller based 25 A programmable digital Almac timer as directed by engineer in-charge.