Improvement works to the 4 tenements of 6G quarters by replacing the existing damaged GI sheet roofing by galvanium colour coding sheet for arresting roof leakages , plastering, flooring, wiring and other allied works at Thekkady

Amount

Dismantling the existing damaged card board false ceiling and clearing away the non usable retrieve materials 200m away from site and usable materials to be devoluted to store including cost of labour, T&P, lead, lift, head load, loading & unloading etc complete. (Transportation TNGECL scope)

Dismantling the existing damaged PCC with lean reinforcement (Weld mesh) without damaging the sub roofing materials and clearing away the non usable retrieve meterials 200m away from site and usable materials to be devoluted to store including cost of labour, T&P, lead, lift, head load, loading & unloading etc complete. (Transportation TNGECL scope)

Dismantling of existing damaged GI /AC sheet roofing without damaging the sub roofing materials and retrieve materials to be devoluted to store including cost of labour, T&P, lead, lift, head load, loading & unloading etc complete. (Transportation TNGECL scope)

Dismantling of existing MS angle / pipe used for purlin without damaging and retrieve materials to be devoluted to store including cost of labour, T&P, lead, lift, head load, loading & unloading etc complete. (Transportation TNGECL scope)

Chipping of concrete and roughening the surface around the quarters and clearing away the retrieve materials 200m away from site including cost of labour, T&P, lead, lift, head load, loading & unloading etc complete.

Dismantling and refixing the 500 Ltr PVC water tank in new location without damages including cost for cutting & jointing the incoming and delivery pipe line, labour, T&P, lead, lift, head load, loading & unloading etc complete.

Dismantling clearing away and carefully stacking materials useful for re-use for any thickness of walls of existing brick work as directed by the Engineer at site including cost of labour, T&P, lead, lift, head load, loading & unloading charges , etc., complete.

Floor finishing with CM 1:3 - 12 mm thick including cost of all meterials, labour, lead, lift, head load curing etc., complete.

Brickwork in CM 1:5 mix using Second Class Ground Moulded Chamber Burnt Bricks of size 9" x 4 3/8" x 2 3/4" including cost of all materials, labour, lead, lift, head load, curing etc complete.

Supplying, fabricating and placing in position of GI pipes TATA make or equivalent for purlins including the cost of all materials, labour, cutting, jointing by welding, pipe to pipe screwing with necessary angle support, transportation, lead, lift, head load, two coat of enamel painting over one coat of red oxide primer etc complete.

40 x 80mm size for main rafter

50 x 50mm size for Distribution rafter

Supplying, fabricating and placing in position of galvanium colour coding roofing sheet 0.45mm thick, TATA make or equivalent for roofing the quarters including the cost of all materials, labour, cutting, lap jointing with pipe by screwing, transportation, lead, lift, head load, etc complete.

Supplying, fabricating and placing in position of galvanium colour coding ridge sheet 0.3m wide on both side TATA make or equivalent for ridge roofing the quarters including the cost of all materials, labour, cutting, lap jointing with pipe by screwing, transportation, lead, lift, head load, etc complete.

Plastering with CM 1:5 - 12mm thick over brick wall and concrete including cost of all materials, labour, lead, lift, head load, curing etc., complete.

Colour washing with two coats of Exterior emulsion paint over a one coat of water based primer after through scrapping and washing / cleaning the old surface outside the quarters including the cost of all materials, lead, lift, labour, T&P etc complete.

White washing with two coats of white cement after through scrapping and washing / cleaning the old surface in utility, toilet & bath of the quarters including the cost of all materials, lead, lift, labour, T&P etc complete.

Wiring with 2 x 1.5 sq mm (22/0.3) PVC insulated unsheathed Sc Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch with painting of suitable colour for open PVC light point / fan point (For electronic regulator) (SD-17).

Wiring with 2x4sq mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 mm x 100 mm x 75mm TW switch box for 15 A 3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point. (SD-39).

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch on suitable TW box.(SD-133).

Supply and fixing of 23 CM Bracket with 15W LED bulb.

GST 18%as per Govt. norms

MOHIDEEN ENTERPRISES (BID ID -1351192)