SUSTAINABLE DEVELOPMENT OF VARIOUS BUILDINGS (3RD CALL)

Amount

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed, the excavated earth shall be stacked anywhere within the campus as directed by EIC.

Excavation for roadway in hard murum and boulder including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m.and spreading for embankment or stacking as directed, the excavated earth shall be stacked anywhere within the campus as directed by EIC.

Excavation for roadway in soft rock, including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading or stacking as directed, the excavated earth shall be stacked anywhere within the campus as directed by EIC.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means., the excavated earth shall be stacked anywhere within the campus as directed by EIC.

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means., the excavated earth shall be stacked anywhere within the campus as directed by EIC.

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means., the excavated earth shall be stacked anywhere within the campus as directed by EIC.

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (Lift from 1.5m To 3.0 m.) By Mechanical Means., the excavated earth shall be stacked anywhere within the campus as directed by EIC.

Excavation for foundation in Hard rock by blasting including trimming and leveling the bed by chiseling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum, watering, ramming, etc. complete. (Lift from 1.5 - 3.0m) By Mechanical Means., the excavated earth shall be stacked anywhere within the campus as directed by EIC.

Transportation of excavated material,Overburden, Rubish, Earth,etc,upto lead 10km to the location assigned by Engineer In charge and as directed by engineer in charge.

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. Complete as directed by EIC

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per square metre of vertical surface area covering 10 years guarantee on bond paper as directed by EIC

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper as directed by EIC.

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 -60 cm deep at 15 cm c/c as close to the wall as possible and to inject 0.5 percent of aldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper as directed by EIC.

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete as directed by EIC.

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete as directed by EIC. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and laying damp proof course 50 mm thick in M20 cement concrete layer and bitumen / using cement with waterproofing compound curing, formwork etc. Complete as directed by EIC.

Providing and fixing in position HCRM / CRS (Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. With 18 gauge GI binding wire and reinforcement couplers as per drawing and as directed by EIC

First Floor

Second Floor

Third Floor

Fourth Floor

FifthFloor

Sixth Floor

Seventh Floor

Terrace Floor

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete as directed by EIC.

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Terrace Floor

Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25mm to 450mm section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete as directed by EIC

First Floor

Third Floor

Seventh Floor

Terrace Floor

Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete as directed by EIC.

Providing coursed rubble masonry second sort of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure including raking out joints when plastering is to be done and striking joints when no plastering is to be done on the inside, watering scaffolding etc.complete as directed by EIC.

First Floor

Providing and constructing masonry in precast solid Concrete Block (Grade D-50 As per I.S. 2185, Part-I, 1974, Reframed 1987) having compressive strength 5-00 N/mm2) of size (300 mm x 200 mm x 150mm) in cement mortar 1:6 for superstructure including striking joints on unexposed faces, racking out joints on exposed faces, watering, curing and scaffolding etc. complete. size of concrete block shall be 400x200x200mm and 400x200x150mm as directed by EIC lower Ground floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

FifthFloor

Sixth Floor

Seventh Floor

Terrace Floor

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc complete as directed by EIC. Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Terrace floor

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete as directed by EIC. Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Terrace Floor

Providing and applying laying Aggregate plaster in granite / marble stones, as decorative finish to give granite / marble like appearance to concrete, brick or block surfaces in all position including preparation of surface smoothly, evenly by racking of joints in case of Brick or block work including backing layer of 12 mm thick with cement mortar 1:3 with 2% integral cement water proofing compound, roughening for wall keying hardening and drying the surface for a minimum five days gaps including second coat of cement lime mortar into a proportion 1:4 preparing the surface for three coat of marble finish plaster giving a thin coat of white cement and two parts of course calcite powder, applying the mortar with steel float on the surface in proper evenness applying at coat of white cement and lime to set a smooth finish then applying a thin coat of slurry made of white cement and black oxide colour in required proportion by the steel float to get black streaks on the surface and curing the surface for two days including all materials and labour etc. complete as directed by EIC.. lower Ground Floor

Ground Floor

First Floor

Second Floor

Terrace Floor

Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete as directed by EIC. Ground floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Terrace Floor

Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete as directed by EIC.. Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Providing and laying ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete as directed by EIC.

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Providing and laying ceramic tiles having size 30 cm. x 60 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc.complete as directed by EIC. Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. Stone sample to be approved by Architect. Sorting & pattern to be approved, tolerance for bending in stone is 0.25mm, flooring to be done below skirting, floor protection, joints should be less than 0.25mm, edge polish and Groove to be done, SS Studs way for finding for differently abled persons, complete as directed by EIC.Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. Sorting & pattern to be approved, tolerance for bending in stone is 0.25mm, flooring to be done below skirting, floor protection, joints should be less than 0.25mm, edge polish and Groove to be done complete as directed by EIC. Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Terrace Floor

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. Sorting & pattern to be approved, tolerance for bending in stone is 0.25mm, flooring to be done below skirting, floor protection, joints should be less than 0.25mm, edge polish and Groove to be done complete as directed by EIC.Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding / moulding the edges etc. complete. One side polish. Sorting & pattern to be approved, tolerance for bending in stone is 0.25mm, flooring to be done below skirting, floor protection, joints should be less than 0.25mm, edge polish and Groove to be done, SS Studs way for finding for differently abled complete as directed by EIC. Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete as directed by EIC.Tile sample and pattern to be approved by Architect. Lower Ground Floor

Ground Floor

First Floor

Second Floor

Providing and applying Royale Luxury Emulsion of Asian / Berger / Nerolac / Dulex Paints or equivalent make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. Applying Asian / Berger / Nerolac / Dulex Paints or equivalent wall primer with brush by adding mineral turpentine oil by 8 to 10 % or water by 15 to 20% allowing to dry for 6 to 8 hoursAfter applying Asian / Berger / Nerolac / Dulex Paints or equivalent acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45 % or 65 to 70 % by roller. (With prior approval of S.E.) With paint Low VOC of 5 STAR Griha complaint, complete as directed by EIC. Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Terrace Floor

Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. With Low VOC content 5 STAR Griha complaint, complete as directed by EIC. Ground floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Terrace Floor

Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete as directed by EIC Ground Floor

First Floor

Providing and fixing solid core flush door shutter in double leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete as directed by EIC Ground Floor

Door Frame: Providing Frames for Lead Lined Fire resistant door shutters 1st class Malaysian Hardwood Frame densified and pressure treated with fire retardant chemicals in vacuum impregnation vessel under 160 PSI pressure as per IS:401and kiln seasoned to moisture below 15% as per IS:1141 of section 140 X 70 mm with 45mm thick two layered 3mm Lead Line Sheets with 10mm overlap from either side & spray quoted with 2 coats of In tumescent paint of minimum 200 micron, with 1 row of Brush- Type Astroflame® intumescent strip (imported) of size 10mmx4mm concealed in the groove of the Frame for fire and hot and cold smoke sealing, etc. complete as per direction of Engineer in Charge Ground floor

First Floor

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1kg/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 kg/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 kg/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete as directed by EIC Ground floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete as directed by EIC (I.S. 62481979) (With mechanical gear) Second Floor

Providing expansion joints with 25mm thick bituminous pad as per detailed drawings etc. complete as directed by EIC Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Providing and fixing 3.5 to 4 mm thick Veneer finish wall Panaling made out of 50 x 25 mm (finished size) C.C.T.W. frame work or size of 600 x 600 mm center or as per site condition covered by 6 mm thick marine plywood of the requisite manufacture viz Anchore / Century / Kenwood /Duro / jet or equivalent generally confiriming to I:S 710-1980 finished with 3.5 to 4 mm thick matching Veneer of approved color and in satin wallnut groov matched veneer pattern and design including melamine polishing & design with antitermite treatment etc. to plywood and woodwork with ten years guarantee bond etc. including all lead and lifts complete as per Architects Drawing and instructions of Engineer Incharge. Ground floor

First Floor

Providing tuck pointing with cement mortar 1:3 for stone/Brick masonry including scaffolding and curing etc. complete as directed by EIC Ground floor

First Floor

Providing groove to required size at specified location as directed by Engineer, at junction of brick masonry wall and R.C.C beams or Column, at junction of composite masonry, including scaffolding, finishing, curing etc. complete as directed by EIC Lower Ground floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Terrace Floor

Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete as directed by EIC First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Providing and laying self-compacting ready mix cement concrete of M-30 grade as per IS 456-2000 for R.C.C. work in foundations like raft, strip foundations, grillage and footing as per approved structural design including providing and mixing required admixtures for self compacting concrete [Super plasticizer-FOSROC AURAMIX 300 and Viscosity Modifying Agent (VMA)-FOSROC AURAMIX V100] in recommended proportions as per IS : 9103 & reinforcement, and as approved by the Engineer-in-charge, for achieving 150- 200mm slump, for RCC members having thickness, required depth and lengths as per approved structural drawing, as directed including Plywood centering formwork, cover blocks laying / pumping or bailing out of water up to a depth of 3.5m, curing, etc., but excluding reinforcement & inserts. (Rates include cost of all inputs of labour, material and T & P, cost of handling, lifting & placing in position concrete, etc.). Coarse aggregate to be used for this purpose shall be 12.5mm down, complete as directed by EIC Ground Floor

First Floor

Second Floor

Third Floor

Sixth Floor

Seventh Floor

Terrace Floor

Providing and laying self-compacting ready mix cement concrete of M-30 grade as per IS 456-2000 for R.C.C. for retaining walls as per approved structural design including providing and mixing required admixtures for self compacting concrete [Super plasticizer-FOSROC AURAMIX 300 and Viscosity Modifying Agent (VMA)-FOSROC AURAMIX V100] in recommended proportions as per IS : 9103 & reinforcement, and as approved by the Engineer-in-charge, for achieving 150- 200mm slump, for RCC members having thickness, required depth and lengths as per approved structural drawing, as directed including Plywood centering formwork, cover blocks laying / pumping or bailing out of water up to a depth of 3.5m, curing, etc., but excluding reinforcement & inserts. (Rates include cost of all inputs of labour, material and T & P, cost of handling, lifting & placing in position concrete, etc.). Coarse aggregate to be used for this purpose shall be 12.5mm down, complete as directed by EIC

Providing and laying self-compacting ready mix cement concrete of M-30 grade as per IS 456-2000 for R.C.C. columns as per approved structural design including providing and mixing required admixtures for self compacting concrete [Super plasticizer-FOSROC AURAMIX 300 and Viscosity Modifying Agent (VMA)-FOSROC AURAMIX V100] in recommended proportions as per IS : 9103 & reinforcement, and as approved by the Engineer-in-charge, for achieving 150- 200mm slump, for RCC members having thickness, required depth and lengths as per approved structural drawing, as directed including Plywood centering formwork, cover blocks laying / pumping or bailing out of water up to a depth of 3.5m, curing, etc., but excluding reinforcement & inserts. (Rates include cost of all inputs of labour, material and T & P, cost of handling, lifting & placing in position concrete, etc.). Coarse aggregate to be used for this purpose shall be 12.5mm down, complete as directed by EIC Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Terrace Floor

Providing and laying self-compacting ready mix cement concrete of M-30 grade as per IS 456-2000 for R.C.C. beams and lintels as per approved structural design including providing and mixing required admixtures for self compacting concrete [Super plasticizer-FOSROC AURAMIX 300 and Viscosity Modifying Agent (VMA)-FOSROC AURAMIX V100] in recommended proportions as per IS : 9103 & reinforcement, and as approved by the Engineer-in-charge, for achieving 150- 200mm slump, for RCC members having thickness, required depth and lengths as per approved structural drawing, as directed including Plywood centering formwork, cover blocks laying / pumping or bailing out of water up to a depth of 3.5m, curing, etc., but excluding reinforcement & inserts. (Rates include cost of all inputs of labour, material and T & P, cost of handling, lifting & placing in position concrete, etc.). Coarse aggregate to be used for this purpose shall be 12.5mm down, complete as directed by EIC Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Terrace Floor

Providing and laying self-compacting ready mix cement concrete of M-30 grade as per IS 456-2000 for R.C.C. slabs and landings as per approved structural design including providing and mixing required admixtures for self compacting concrete [Super plasticizer-FOSROC AURAMIX 300 and Viscosity Modifying Agent (VMA)-FOSROC AURAMIX V100] in recommended proportions as per IS : 9103 & reinforcement, and as approved by the Engineer-in-charge, for achieving 150- 200mm slump, for RCC members having thickness, required depth and lengths as per approved structural drawing, as directed including Plywood centering formwork, cover blocks laying / pumping or bailing out of water up to a depth of 3.5m, curing, etc., but excluding reinforcement & inserts. (Rates include cost of all inputs of labour, material and T & P, cost of handling, lifting & placing in position concrete, etc.). Coarse aggregate to be used for this purpose shall be 12.5mm down, complete as directed by EIC Plinth level slab

Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Terrace Floor

Providing and laying self-compacting ready mix cement concrete of M-30 grade as per IS 456-2000 for R.C.C. coping to plinth or parapet and sill of doors and windows moulded as per approved structural design including providing and mixing required admixtures for self compacting concrete [Super plasticizer-FOSROC AURAMIX 300 and Viscosity Modifying Agent (VMA)-FOSROC AURAMIX V100]] in recommended proportions as per IS : 9103 & reinforcement, and as approved by the Engineer-in-charge, for achieving 150- 200mm slump, for RCC members having thickness, required depth and lengths as per approved structural drawing, as directed including Plywood centering formwork, cover blocks laying / pumping or bailing out of water up to a depth of 3.5m, curing, etc., but excluding reinforcement & inserts. (Rates include cost of all inputs of labour, material and T & P, cost of handling, lifting & placing in position concrete, etc.). Coarse aggregate to be used for this purpose shall be 12.5mm down, complete as directed by EIC Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Terrace Floor

Providing and laying self-compacting ready mix cement concrete of M-30 grade as per IS 456-2000 for R.C.C. waist slabs and steps of staircase as per approved structural design including providing and mixing required admixtures for self compacting concrete [Super plasticizer-FOSROC AURAMIX 300 and Viscosity Modifying Agent (VMA)-FOSROC AURAMIX V100] in recommended proportions as per IS : 9103 & reinforcement, and as approved by the Engineer-in-charge, for achieving 150- 200mm slump, for RCC members having thickness, required depth and lengths as per approved structural drawing, as directed including Plywood centering formwork, cover blocks laying / pumping or bailing out of water up to a depth of 3.5m, curing, etc., but excluding reinforcement & inserts. (Rates include cost of all inputs of labour, material and T & P, cost of handling, lifting & placing in position concrete, etc.). Coarse aggregate to be used for this purpose shall be 12.5mm down, complete as directed by EIC Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Providing and laying self-compacting ready mix cement concrete of M-30 grade as per IS 456-2000 for R.C.C. pardi as per approved structural design including providing and mixing required admixtures for self compacting concrete [Super plasticizer-FOSROC AURAMIX 300 and Viscosity Modifying Agent (VMA)-FOSROC AURAMIX V100] in recommended proportions as per IS : 9103 & reinforcement, and as approved by the Engineer-in-charge, for achieving 150- 200mm slump, for RCC members having thickness, required depth and lengths as per approved structural drawing, as directed including Plywood centering formwork, cover blocks laying / pumping or bailing out of water up to a depth of 3.5m, curing, etc., but excluding reinforcement & inserts. (Rates include cost of all inputs of labour, material and T & P, cost of handling, lifting & placing in position concrete, etc.). Coarse aggregate to be used for this purpose shall be 12.5mm down, complete as directed by EIC Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Terrace Floor

Providing and laying self-compacting ready mix cement concrete of M-30 grade as per IS 456-2000 for R.C.C. chajja as per approved structural design including providing and mixing required admixtures for self compacting concrete [Super plasticizer-FOSROC AURAMIX 300 and Viscosity Modifying Agent (VMA)-FOSROC AURAMIX V100] in recommended proportions as per IS : 9103 & reinforcement, and as approved by the Engineer-in-charge, for achieving 150- 200mm slump, for RCC members having thickness, required depth and lengths as per approved structural drawing, as directed including Plywood centering formwork, cover blocks laying / pumping or bailing out of water up to a depth of 3.5m, curing, etc., but excluding reinforcement & inserts. (Rates include cost of all inputs of labour, material and T & P, cost of handling, lifting & placing in position concrete, etc.). Coarse aggregate to be used for this purpose shall be 12.5mm down, complete as directed by EIC Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Providing and laying self-compacting ready mix cement concrete of M-35 grade as per IS 456-2000 for R.C.C. rectangular grid beam with slab as per approved structural design including providing and mixing required admixtures for self compacting concrete [Super plasticizer-FOSROC AURAMIX 300 and Viscosity Modifying Agent (VMA)-FOSROC AURAMIX V100] in recommended proportions as per IS : 9103 & reinforcement, and as approved by the Engineer-in-charge, for achieving 150- 200mm slump, for RCC members having thickness, required depth and lengths as per approved structural drawing, as directed including Plywood centering formwork, cover blocks laying / pumping or bailing out of water up to a depth of 3.5m, curing, etc., but excluding reinforcement & inserts. (Rates include cost of all inputs of labour, material and T & P, cost of handling, lifting & placing in position concrete, etc.). with High density Thermocol of density 15-20kg/cum as directed by EIC. Coarse aggregate to be used for this purpose shall be 12.5mm down, complete as directed by EIC Lower Ground Floor

Ground Floor

First Floor

Second Floor

Providing and laying Glass mosaic tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete as directed by EIC a) Flooring Tile sample to be approved by Architect Ground Floor

First Floor

Second Floor

Providing and laying Glass mosaic tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (group Bla) of approved make, shade and pattern for Dado in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete as directed by EIC. Tile sample to be approved by Architect Lower Ground Floor

Ground Floor

First Floor

Second Floor

Providing and fixing of China Mosaic tile of approved make, shade and pattern for flooring in required position laid on a bed of cement paste/adhesive including curing and cleaning etc., complete as directed by EIC,Tile sample to be approved by Architect

First Floor

Second Floor

Third Floor

Seventh Floor

Terrace Floor

Providing and fixing in position anodised Aluminium sliding doors of three tracks with the aluminium profiles have a building depth of 68/100 mm for the outer frame 2-rail, 145 mm for the outer frame monorail, 123/145 mm for the outer frame 3-rail and 42.2 mm for the vents. The structural profile walls have a nominal thickness of 1.8 to 2.5 mm and the glazing width of 24 to 30mm is covered with 6 mm thick toughened glass 16mm organ gas 5mm thick plain glass (DGU). As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including DGU glass with VLT=41%, External reflection=20%, Internal reflection=15%, solar reflector=0.23, Shading co-efficient=0.26, U Value=1.1W/sqm.K., all required screws and nuts etc, complete as directed by EIC. Ground Floor

First Floor

Providing and fixing in position anodised aluminium light shelve fixed window of any size with aluminium louvers as per detailed drawing and as directed by Engineer in charge with all necessary aluminium sections, the frame profiles have a construction depth of 45 mm. The vent profiles have a construction depth of 54 mm. The structural profile walls have a nominal thickness of 1.0mm to 2.0 mm and the glazing width up to 33mm is covered with 6 mm thick toughened glass 16mm organ gas 5mm thick plain glass (DGU). As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including DGU glass with VLT=41%, External reflection=20%, Internal reflection=15%, solar reflector=0.23, Shading co-efficient=0.26, U Value=1.1W/sqm.K., all required screws and nuts etc, complete as directed by EIC. Ground Floor

First Floor

Second Floor

Providing and fixing in position anodised Aluminium sliding window of three tracks with the aluminium profiles have a building depth of 68/100 mm for the outer frame 2-rail, 145 mm for the outer frame monorail, 123/145 mm for the outer frame 3-rail and 42.2 mm for the vents and with mosquito mesh. The structural profile walls have a nominal thickness of 1.8 to 2.5 mm and the glazing width of 24 to 30mm is covered with 6 mm thick toughened glass 16mm organ gas 5mm thick plain glass (DGU). As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including DGU glass with VLT=41%, External reflection=20%, Internal reflection=15%, solar reflector=0.23, Shading co-efficient=0.26, U Value=1.1W/sqm.K., all required screws and nuts etc, complete as directed by EIC. Ground Floor

First Floor

Providing and fixing in position anodised Aluminium openable / fixed window of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections, the frame profiles have a construction depth of 45 mm. The vent profiles have a construction depth of 54 mm. The structural profile walls have a nominal thickness of 1.0mm to 2.0 mm and the glazing width up to 33mm is covered with 6 mm thick toughened glass 16mm organ gas 5mm thick plain glass (DGU). As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including DGU glass with VLT=41%, External reflection=20%, Internal reflection=15%, solar reflector=0.23, Shading co-efficient=0.26, U Value=1.1W/sqm.K., all required screws and nuts etc, complete as directed by EIC. Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Providing and fixing in position anodised Aluminium sliding doors of three tracks with the aluminium profiles have a building depth of 68/100 mm for the outer frame 2-rail, 145 mm for the outer frame monorail, 123/145 mm for the outer frame 3-rail and 42.2 mm for the vents. The structural profile walls have a nominal thickness of 1.8 to 2.5 mm with 6 mm thick toughened glass. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including SGU glass with VLT=66%, External reflection=19%, Internal reflection=19%, solar reflector=0.68, Shading co-efficient=0.78, U Value=5.6W/sqm.K., all required screws and nuts etc, complete as directed by EIC. Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Providing and fixing in position anodised Aluminium sliding window of three tracks with the aluminium profiles have a building depth of 68/100 mm for the outer frame 2-rail, 145 mm for the outer frame monorail, 123/145 mm for the outer frame 3-rail and 42.2 mm for the vents and with mosquito mesh. The structural profile walls have a nominal thickness of 1.8 to 2.5 mm with 6 mm thick toughened glass. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including SGU glass with VLT=66%, External reflection=19%, Internal reflection=19%, solar reflector=0.68, Shading co-efficient=0.78, U Value=5.6W/sqm.K., all required screws and nuts etc, complete, complete as directed by EIC. Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Providing and fixing in position anodised Aluminium openable / fixed window of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections, the frame profiles have a construction depth of 45 mm. The vent profiles have a construction depth of 54 mm. The structural profile walls have a nominal thickness of 1.0mm to 2.0 mm with 6 mm thick toughened glass. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including SGU glass with VLT=66%, External reflection=19%, Internal reflection=19%, solar reflector=0.68, Shading co-efficient=0.78, U Value=5.6W/sqm.K., all required screws and nuts etc, complete as directed by EIC Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Providing and fixing in position anodised aluminium louvered windows / ventilator of various sizes with as per detailed drawing and specifications including aluminium frames the frame profiles have a construction depth of 45 mm.The structural profile walls have a nominal thickness of 1.0mm to 2.0 mm, 5 mm thick frosted glass louvers, of approved quality etc. complete. Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Providing and fixing Polyisocyanurate (PIR) boards, on levelled surface, with compression strength 160kPa to 220kPa, thermal conductivity of material 0.023W/mk, 0.019W/mk respectively, density 48 ± 3 Kg/m3 and water absorption less than or equal to 1-3% of thickness 50mm, including pasting the board with adhesive mortar (mixed in ratio 1:5) to the surface, drilling hole to fix fasteners, reinforcing 2mm thick mesh with base coat mortar (mixed in ratio 1:5) and 12mm thick rough plaster with cement mortar (mix ratio 1:5) etc;complete. all as per specification and directions of EIC Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Terrace Floor

Providing and fixing 12mm thick clear toughened glass fixed to aluminium U channel of size 25mm*19mm*3mm at bottom and top 75 x 75mm SS box section vertical and horizontal support, using RSF-F-4P four arm fin spider, RSF-F-2P two arm fin spider, RSF-F-1P one arm fin spider, MS fin shoe bracket, with cover nut and bolt including packing and filling with chemicals, sealant and masking tape, cost of material,transportation, handling,fabrication, site supervision, contingencies complete as directed by EIC (excluding civil work, if any) Ground Floor

First Floor

Providing and fixing of 12mm thick frameless toughened glass partition fixed to 20 x 20 x 1.5mm Aluminium U channel section at top and bottom with necessary sealent and hardwares., complete as per specification and drawings and complete as directed by EIC Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement, SS brushed C-Handle, bottom patch lock and making necessary holes etc., for fixing required door fittings, all complete as per specification and drawings,complete as directed by EIC Ground Floor

First Floor

Providing and fixing Skylight of 6mm clear toughened glass+1.52pvb +8mm clear toughened glass, fixed to AL BOX section 40mm*40mm*1.5mm anchored to 100mm*200mm MS box section and 25 x 25 x 1.5mm Aluminium U channel section with silicon sealant including packing and filling with poly propylene packing and chemical respectively, applying silicon seleant, VHP TAPE, cost of material,transportation, handling,fabrication, site supervision, contingencies complete as per specification,complete as directed by EIC .(excluding civil work, if any) ground floor

First Floor

Second Floor

Terrace Floor

Providing and fixing of 50mm thick GRC panel fixed to 100 x 100 x 5mm M.S Box section vertical support spacing between 1.125m and 100 x 100 x 5mm M.S.Box section horizontal supports spacing between with 3.145m including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, 2 coats of mettalic paint for MS Box sections etc. complete as directed by EIC Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Providing, fabricating and fixing Services Shaft cover having MS frame 40 x 40mm ISA section 6mm thick as side frame, and 8mm thick Cement board screwed to the 40 x 40mm ISA section 6mm thick shutter frame fixing with Alan key, cylindrical hinge and SS screws with necessary one coat of primer and paint for MS frame etc.,scaffolding. complete as per detailed drawing and specification and direction of EIC. Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Terrace floor

Providing and fixing of W/P Seasoned Teakwood parquet strips of size 290 x 45 x 10mm over the base of 2mm Fome and 6mm plywood. Thick including laying, Machined and two coats of waterbase Polyurethane polish, complete as directed by EIC Second Floor

Providing and fixing of Toilet cubicles with 12mm thick HPL boards, doors, partitions of size 0.9mx1.5mx 2,1 mt height with necessary hardwares as per the instructions and as directed by EIC, etc complete Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and fixing of Urinal partitions of size 0.6 m. x 1.0 m. with 20mm thick double side polished Granite stone with necessary cutting and holes making, joint filling, shape, grooves, nosing and edge polish as per specification and drawings, complete as directed by EIC Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and constructing masonry in Wirecut exposed brick having compressive strength 7.5 N/mm2) of size (300 mm x 100 mm x 50mm) in cement mortar 1:6 for superstructure with 10mm racking out joint on exposed faces, watering, curing and scaffolding etc. complete as directed by EIC Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Providing and fixing of M.S staging/Centering with bracing support, the equipment shall consist of a system of interlocking platforms of appropriate construction on a support system to provide the height and configuration as indicated for all heights beyond 4.5 - 9.0 mtr at assigned location as directed by Engineer in Charge etc complete.The design of staging shall get approved from competent authority before execution of works. (only plan area of staging shall be measured and paid for once).The rate quoted shall be inclusive of removal of staging/centering materials as directed Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Providing and laying 100 mm thick Basalt stone flooring over 50 mm (average) thick base of cement mortar 1:5 (1 cement :5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar, complete as directed by EIC Ground Floor

Providing water proofing for terrace including cleaning, removal of dead mortar, scraping and applying brush bond (as per consultant approval) to the concrete surfaces, application of 75mm thick PIR Insulation boards over the surfaces with foam. providing water proofing for Terrace by surface method of Light weight blocks(AAC) filling average thickness of 75mm to 150mm with water proof ad-mixture of FOSROC or equivalent as per manufacture’s specification approved by Consultants, top finished with CM 1:3 mixed with water proofing compound, top finished with 50mm thick screed concrete using M15 and 20mm down size aggregates. Treatment to continue along parapet upto 550mm height in shape of round wata, curing etc.,complete as directed by EIC. Cost to include the treatment along parapet and no measurement will be accounted for the parapet treatment. (Only plan area shall be accounted and paid for.,) Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Seventh Floor

Terrace Floor

Providing and laying vitrified matt finish tiles having size 600 mm to 1200 mm of 6 to 8 mm thickness with approved make, shade and pattern for flooring in required position laid on a backing of Adhesive / cement paste including neat cement float, filling joints, curing and cleaning etc. complete as directed by EIC. Skirting Tile sample to be approved by Architect Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Terrace Floor

Providing and fixing 1100mm high M.S. railing with 40x12mm thick flat at top, 50mm diameter pipe and 1.5mm thick at 900mm high, 40x12mm thick flat vertical supports(baluster) spaced at 800mm center to center and 16mm dia M.S. pipe with 16gauge placed between the balusters at an interval of 100mm c/c including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, 2 coats of mettalic grey paint etc. complete as directed by EIC. Staircase,Corridor and Balcony Railing Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Terrace Floor

Sieve and stack the excavated earth as per IS Sieves of size – 80mm to the location assigned by Engineer In charge, separate the debris(plastics, papers etc.,) as directed by EIC., Ground Floor

Providing and fixing of metal door,door frame shall be single rebate profile of size 125mm*57mm made out of 1.6mm(16gauge) mimimum thick galvanised steel sheet,frames shall be mitre joints and single leaf door shall be 46.6mm thick fully flush with infill of resin bonded honeycomb kraft,door leaf shall be of 1.2mm (18 gauge)minimum thick galvanized steel sheet.Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening .All doors shall be factory prepared for receiving appropriate hardwares and provided with necessary reinforcement for hinges,locks,handle and door closure,colour of door frame and shutter shall be of approved colour ,etc complete as directed by EIC Lower Grounf Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Providing and fixing of metal door,door frame shall be single rebate profile of size 125mm*57mm made out of 1.6mm(16gauge) mimimum thick galvanised steel sheet,frames shall be mitre joints and Double leaf door shall be 46.6mm thick fully flush with infill of resin bonded honeycomb kraft,door leaf shall be of 1.2mm (18 gauge)minimum thick galvanized steel sheet. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening.All doors shall be factory prepared for receiving appropriate hardwares and provided with necessary reinforcement for hinges,locks,handle and door closure,colour of door frame and shutter shall be of approved colour ,etc complete as directed by EIC Lower Grounf Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Terrace Floor

Providing and fixing of metal door,door frame shall be single rebate profile of size 125mm*57mm made out of 1.6mm(16gauge) mimimum thick galvanised steel sheet,frames shall be mitre joints and Double leaf door shall be 46.6mm thick fully flush with infill of resin bonded honeycomb kraft,door leaf shall be of 1.2mm (18 gauge)minimum thick galvanized steel sheet with vision panel to be provided with a 6mm glass , beeding and screws from inside .Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening.All doors shall be factory prepared for receiving appropriate hardwares and provided with necessary reinforcement for hinges,locks,handle and door closure,colour of door frame and shutter shall be of approved colour ,etc complete as directed by EIC Lower Ground Floor

Ground Floor

First Floor

Second Floor

Providing and fixing of metal door,door frame shall be single rebate profile of size 125mm*57mm made out of 1.6mm(16gauge) mimimum thick galvanised steel sheet,frames shall be mitre joints and Double leaf door shall be 46.6mm thick fully flush with infill of resin bonded honeycomb kraft,door leaf shall be of 1.2mm (18 gauge)minimum thick galvanized steel sheet with provision for louvers inbuilt as per drawing .Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening.All doors shall be factory prepared for receiving appropriate hardwares and provided with necessary reinforcement for hinges,locks,handle and door closure,colour of door frame and shutter shall be of approved colour ,etc complete as directed by EIC Lower Ground Floor

Ground Floor

First Floor

Second Floor

Providing and fixing of metal door,door frame shall be single rebate profile of size 125mm*57mm made out of 1.6mm(16gauge) mimimum thick galvanised steel sheet,frames shall be mitre joints and Single leaf door shall be 46.6mm thick fully flush with infill of resin bonded honeycomb kraft,door leaf shall be of 1.2mm (18 gauge)minimum thick galvanized steel sheet with vision panel to be provided with a 6mm glass , beeding and screws from inside .Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening.All doors shall be factory prepared for receiving appropriate hardwares and provided with necessary reinforcement for hinges,locks,handle and door closure,colour of door frame and shutter shall be of approved colour ,etc complete as directed by EIC Lower Ground Floor

Ground Floor

First Floor

Second Floor

Providing and fixing of metal door,door frame shall be single rebate profile of size 125mm*57mm made out of 1.6mm(16gauge) mimimum thick galvanised steel sheet,frames shall be mitre joints and Single leaf door shall be 46.6mm thick fully flush with infill of resin bonded honeycomb kraft,door leaf shall be of 1.2mm (18 gauge)minimum thick galvanized steel sheet with provision for louvers inbuilt as per drawing .Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening.All doors shall be factory prepared for receiving appropriate hardwares and provided with necessary reinforcement for hinges,locks,handle and door closure,colour of door frame and shutter shall be of approved colour ,complete as directed by EIC Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Proviiding and fixing 200x200x75mm thick Glass block with adhesive, sealant and necessary packing., complete as per drawings and specifications, complete as directed by EIC Lower Ground Floor

Providing and construction of 6"thk Stabilized Mud Block walls of minimum strength of 35kg/sqcm including lifting, placing, necessary scaffolding at all heights using 3/4" thick 1:7:7 stabilized mud mortar with proper curing, including the cost of all materials, labour, transportation, cost of equipment and machinery, loading and unloading, all other incidental charges at all lead and lift etc., complete as directed by EIC. (Block test report to be presented to architect and client before starting the walls at site. Test to be done at contractor's cost, (REQUIRED STRENGTH OF BLOCKS WITH 8% stabilisation.) with necessary pointing to the SMB masonry using 1:6 stabilized mortar (1 cement and 6 mixture of fine quarry dust and fine soil) after racking of the joints to a depth of 1" and nicely lining curing etc… Ground Floor

Excavation in soft rock without blasting including boulders upto 0.6m diameter (0.113 cum) for canal, seating of embankment, filter drains/ catch water drains etc., and placing the excavated soft rock neatly in dump area or for formation of service road as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc.,complete as directed by EIC with lead upto 1 km and lift upto 6m.

Providing and filling in the foundation with sand of approved quality including watering, compacting etc. complete. (To be executed with prior approval of Superintending Engineer), complete as directed by EIC

Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge.

Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and filling with 150 mm thick jamuna sand, including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge.

Providing and casting in situ or precast tapering R.C.C. M-20 Semi Barrier type Kerb without gutter ( as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant

Providing and casting in situ or precast tapering R.C.C. M-20 Mountable type Kerb without gutter ( as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant

Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc.complete as directed by EIC

Providing and inserting CE Marked Prefabricated Vertical Drain / Band Drain (TechDrain) of Techfab India indigenously manufactured with Polypropylene Core and wrapped with Non-Woven Geotextile in the very soft clay to a design depth for quick consolidation etc. complete. (Specification: MORTH Section-700).with prior approval of concerned Superitending Engineer, complete as directed by EIC a) TFI TechDrain TD-3520 U 100mm x 4mm

Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete as directed by EIC

Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with aggregate finish 8mm downsize with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete as directed by EIC

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 40 mm thick stone slab over 40 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineerin-Charge :

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 60 mm thick stone slab over 60 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineerin- Charge :

Supplying and fixing of 75MM THICK,200MM x 200MM terracota jali blocks laid with paper joints and cement packing. The work includes cost of all material, labor, lead & lift and all other incidental charges required for the successful completion of the works as per the design, drawings and directions of the Engineer-in-charge of the work.

Supplying and fixing of 60 mm thk, 450mm deep x 1200mm granite stone kerb laid with paper joints and cement packing on Ground. The work includes cost of all material, labor, lead & lift and all other incidental charges required for the successful completion of the works as per the design, drawings and directions of the Engineer-in-charge of the work.

Providing and laying flamed finish Granite stone coping with 40 mm thick stone slab over 25 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineerin-Charge; and providing half nosing using required machinery including cost and conveyance of all materials, labour for all items of work, HOM of equipment etc., complete as per specification and direction of EIC

providing and fixing 1 mm thick GI strings with necessary hook and ring connections to the 150mm*150mm box sections inbetween and fixed with 120mm*60mm wooden battern .,complete as directed by EIC

Providing and laying 100 mm thick Grey granite cobble stone with 100mm mortar joint and 3mm recess pointing, flooring over 50 mm (average) thick base of cement mortar 1:5 (1 cement :5 coarse sand), complete as directed by EIC

Providing and spreading 75 mm thk 6mm and downsize or pea sized gravel over formed surafce including lead, lift etc, complete as directed by EIC

Providing and fixing heavy duty 300mm x 300mm Gray tactile C.C. Paver blocks of 60 mm thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete.

Providing and laying bush-hammered Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 30 mm thick stone slab over 30 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineerin-Charge :

Supplying and stacking of good earth at site and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment), complete as directed by EIC.

Supplying and stacking at site dump manure from approved source, including carriage upto 5 km complete (manure measured in stacks will be reduced by 8% for payment), complete as directed by EIC a) Screened through sieve of I.S. designation 20 mm

Filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling (cost of supplying earth and sludge or manure and mixing excluded), complete as directed by EIC

Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately)

Digging holes (Holes 90 cm dia, and 90 cm deep) in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately), complete as directed by EIC

Providing and fixing M. S. tree guard 50 cm square in plan, height 1.40 metre above ground level and 0.50 metre below ground level. The vertical members shall consist of four nos of angle iron of size 25x25x5 mm 1.9 m long, one at each corner and 8 nos flat iron of size 25x5 mm 1.4 m long. The vertical members shall be welded to 4 nos 25x6 mm M. S. flats placed horizontally around the vertical member of the cage. One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD / PWD/ any other approved name. The tree guard shall be fixed to the ground by making suitable holes and by embedding four corners leg in the ground, including refilling the earth , compaction etc. complete. The tree guard shall be painted with two coats of paint of approved brand and manufacture over a coat of primer, complete as directed by EIC

Tree Transplantation with in the site as directed by Engineer in charge, rate to include excavation and filling for the existing tree location and transportation of trees, excavation, filling for new designed location., complete as directed by EIC

Providing and fixing of CP Hand shower (health faucet) with 8mm dia. 1m long CP flexible tube having wall hook and wall flange with approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge.The flow rate should be 4 LPM, complete as directed by EIC Lower ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Terrace Floor

Providing and fixing toilet paper holder, The cost should also include pair of SS screws & PVC set screws to fix paper holder, complete as directed by EIC Lower ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Terrace Floor

Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete. The cost should also include pair of SS screws & PVC set screws to fix towel rod complete as directed by EIC Lower ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Providing and fixing Shower Head with shower arm of approved make over head shower with arm, divertor and spout including all necessary pipe fittings and connections etc. complete as directed by Engineer in charge. Flow rate should be 6 LPM, complete as directed by EIC Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Making provision for drinking water point by fixing angular stop cock for inlet of the cold water pipe line (For Drinking water point). The cost also should include wall flange, complete as directed by EIC Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc.complete as directed by EIC Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Providing, laying and fixing P.V.C. pipe of 40mm dia. with fittings such as bends, tees, reducers, clamps, etc.P.V.C pipe confirming to IS 13592 : 1992, type B (6 kg/cm2), including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or complete as directed by EIC Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Providing, laying and fixing P.V.C. pipe of 50mm dia. with fittings such as bends, tees, reducers, clamps, etc..P.V.C pipe confirming to IS 13592 : 1992, type B (6 kg/cm2), including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc.complete as directed by EIC Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Terrace Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Terrace Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Terrace Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Terrace Floor

Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber without grating for the gully trap, complete as directed by EIC Lower Ground Floor

Ground Floor

Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and without Cover,complete as directed by EIC Lower Ground Floor

Ground Floor

Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm With R.C.C. raft in B.C. soil area including cost of reinforcement, 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and without cover . complete as directed by EIC Ground Floor

Providing and fixing Ductile iron Man Hole Covers/ Strom Water Grating and Grating with frame of Various sizes, weight and types and load bearing capacity as per EN-124, with prior approval of concerned Superitending Engineer. Ground Floor

Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.Chlorinated Polyvinyl Chloride pipes (CPVC) of SDR 11 as per IS 15778:2007 and Joints to be made with CPVC solvent as per ASTM F 493 complete as directed by EIC Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Terrace Floor

Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.Chlorinated Polyvinyl Chloride pipes (CPVC) of SDR 11 as per IS 15778:2007 and Joints to be made with CPVC solvent as per ASTM F 493 complete as directed by EIC Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.Chlorinated Polyvinyl Chloride pipes (CPVC) of SDR 11 as per IS 15778:2007 and Joints to be made with CPVC solvent as per ASTM F 493 complete as directed by EIC Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Terrace Floor

Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.Chlorinated Polyvinyl Chloride pipes (CPVC) of SDR 11 as per IS 15778:2007 and Joints to be made with CPVC solvent as per ASTM F 493 complete as directed by EIC Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.Chlorinated Polyvinyl Chloride pipes (CPVC) of SDR 11 as per IS 15778:2007 and Joints to be made with CPVC solvent as per ASTM F 493 complete as directed by EIC Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Terrace Floor

Providing and laying in trenches 20 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.Chlorinated Polyvinyl Chloride pipes (CPVC) of SDR 11 as per IS 15778:2007 and Joints to be made with CPVC solvent as per ASTM F 493 complete as directed by EIC Ground Floor

Providing and laying in trenches 25 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc.complete.Chlorinated Polyvinyl Chloride pipes (CPVC) of SDR 11 as per IS 15778:2007 and Joints to be made with CPVC solvent as per ASTM F 493 complete as directed by EIC Ground Floor

Providing and laying in trenches 32 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.Chlorinated Polyvinyl Chloride pipes (CPVC) of SDR 11 as per IS 15778:2007 and Joints to be made with CPVC solvent as per ASTM F 493 complete as directed by EIC Ground Floor

Providing and laying in trenches 40mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.Chlorinated Polyvinyl Chloride pipes (CPVC) of SDR 11 as per IS 15778:2007 and Joints to be made with CPVC solvent as per ASTM F 493 completeGround Floor

Providing and laying in trenches 50mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.Chlorinated Polyvinyl Chloride pipes (CPVC) of SDR 11 as per IS 15778:2007 and Joints to be made with CPVC solvent as per ASTM F 493 complete as directed by EIC

Prov iding and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : Blue color handle shall be used for Domestic water ball valve and Red color handle shall be used for Hot water and Green color handle shall be used for Flushing water lines for easy identification purpose.Pressure rating PN 10, without plastic floats, complete as directed by EIC nominal bore Lower Ground Floor 20 mm

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Terrace Floor

Prov iding and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : Blue color handle shall be used for Domestic water ball valve and Red color handle shall be used for Hot water and Green color handle shall be used for Flushing water lines for easy identification purpose.Pressure rating PN 10, without plastic floats, complete as directed by EIC nominal bore 25 mm Lower Ground Floor

Ground Floor

First Floor

Second Floor

Seventh Floor

Providing and fixing gun metal non- return valve of approved quality (screwed end) : The cost includes joints required for the CPVC pipes to valves such as flanges, couplings etc complete. All valves will be fixed as per the drawings..Pressu rerating PN 10, complete as directed by EIC Second Floor 32 mm nominal bore

Third Floor

Seventh Floor

Terrace Floor

Supply, Installing, testing and commissioning of White colour wall mounted type approved make European Water Closet with 'P' or 'S' trap with concealed cistern (3 / 6 LPF) dual flush with all internal parts of the cistern for efficient functioning & flush plate, polypropylene solid hard seat and quiet close cover of approved make with polythene buffers and flap, brass CP wall flanges all of approved make, with mounting chair bracket custom made to specific dimensions as mentioned by the architect / engineer, fixing of 110mm dia straight type straight siphon uPVC WC pan connector with neoprene rubber ring and necessary accessories shall be of approved make and model no. complete as directed by EIC Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Supply, Installing, testing and commissioning of Oval white glazed wash basin of approved colour below counter , with 32mm dia CP 'waste coupling, 32 mm dia. CP bottle trap with extension pipe, C.I wall brackets with a pair of SS screws to support the basin,1no. 15mm CP Sensor faucet (Electrically Operated) with casted spout, 15mm CP 'angle valve with 450mm long CP inlet braided hose connection pipe, CP wall flange all of approved make, complete as directed by EIC (Flow rate should be 1.8 LPM) Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Supply, Installing, testing and commissioning of CP brass liquid soap dispenser of approved make with all necessary SS screws & PVC set screws complete as directed by EIC.Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Supply, Installing, testing and commissioning of White glazed large flat back Sensor operated urinals (Electrically - Operated) with 40mm dia CP waste coupling with dome type grating, 40mm dia CP bottle trap with extension pipe, urinal spreader, angle cock,connecting pipe,SS bolts and nuts to fix the urinal with all hangers and brackets complete with wall flanges. (Flow rate should be of 0.5 LPF ), complete as directed by EICLower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

FifthFloor

Sixth Floor

Making of Rain Water Collection khurra's grating with PVC bends, enlarger with PVC sheet flashing with PVC Grating, complete as directed by EIC Terrace Floor

Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete with Multiple inlets and One Out let, complete as directed by EICLower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Supply and fixing brass ball valve of forged brass, machined to mirror smooth finish, Seat: pure PTFE (polytetra fluoro ethylene) , conical Arc cut. Stem seals: Double O ring of hydrogenated nitrile rubber (H - NBR). Nut: Self locking nylon nut, British Standard Pipes female threads etc complete. The quote shall also inclusive of the material necessary to withstand 1.5 times design pressure without leakage (valve joints). The cost includes joints required for the pex pipes pipes to valves such as flanges, couplings etc complete as directed by EIC. All valves will be fixed as per the drawings.Lower Ground Floor 32 mm dia

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Terrace Floor

Supply and fixing brass ball valve of forged brass, machined to mirror smooth finish, Seat: pure PTFE (polytetra fluoro ethylene) , conical Arc cut. Stem seals: Double O ring of hydrogenated nitrile rubber (H - NBR). Nut: Self locking nylon nut, British Standard Pipes female threads etc complete. The quote shall also inclusive of the material necessary to withstand 1.5 times design pressure without leakage (valve joints). The cost includes joints required for the pex pipes pipes to valves such as flanges, couplings etc complete as directed by EIC. All valves will be fixed as per the drawings Lower Ground Floor 40 mm dia

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Supply and fixing brass ball valve of forged brass, machined to mirror smooth finish, Seat: pure PTFE (polytetra fluoro ethylene) , conical Arc cut. Stem seals: Double O ring of hydrogenated nitrile rubber (H - NBR). Nut: Self locking nylon nut, British Standard Pipes female threads etc complete. The quote shall also inclusive of the material necessary to withstand 1.5 times design pressure without leakage (valve joints). The cost includes joints required for the pex pipes pipes to valves such as flanges, couplings etc complete as directed by EIC. All valves will be fixed as per the drawings Ground Floor 50 mm

Supply & fixing Butterfly valves. The body of the valve should be Stainless steel/ Gunmetal fine graded casting, neck: should be extended neck design, sleeve: replacable type EPDM sleeve with phenolic backing, DISC & PIN: ductile iron with electroless nickle plating mirror smooth, shaft: carbon steel one piece and please follow the technical specification attached. The quote shall also be inclusive of the material necessary to withstand 16 kg/cm2 without leakage (valve joints). The cost includes joints required for the CPVC / HDPE pipes to valves such as flanges, couplings etc complete as directed by EIC Ground Floor 65 mm dia

Supply & fixing Butterfly valves. The body of the valve should be Stainless steel/ Gunmetal fine graded casting, neck: should be extended neck design, sleeve: replacable type EPDM sleeve with phenolic backing, DISC & PIN: ductile iron with electroless nickle plating mirror smooth, shaft: carbon steel one piece and please follow the technical specification attached. The quote shall also be inclusive of the material necessary to withstand 16 kg/cm2 without leakage (valve joints). The cost includes joints required for the CPVC / HDPE pipes to valves such as flanges, couplings etc complete as directed by EIC Ground floor 80 mm dia

Seventh Floor

Supply & fixing Butterfly valves. The body of the valve should be Stainless steel/ Gunmetal fine graded casting, neck: should be extended neck design, sleeve: replacable type EPDM sleeve with phenolic backing, DISC & PIN: ductile iron with electroless nickle plating mirror smooth, shaft: carbon steel one piece and please follow the technical specification attached. The quote shall also be inclusive of the material necessary to withstand 16 kg/cm2 without leakage (valve joints). The cost includes joints required for the CPVC / HDPE pipes to valves such as flanges, couplings etc complete as directed by EIC 100 mm dia

Supply & fixing Butterfly valves. The body of the valve should be Stainless steel/ Gunmetal fine graded casting, neck: should be extended neck design, sleeve: replacable type EPDM sleeve with phenolic backing, DISC & PIN: ductile iron with electroless nickle plating mirror smooth, shaft: carbon steel one piece and please follow the technical specification attached. The quote shall also be inclusive of the material necessary to withstand 16 kg/cm2 without leakage (valve joints). The cost includes joints required for the CPVC / HDPE pipes to valves such as flanges, couplings etc complete as directed by EIC Ground Floor150 mm Dia

Providing & fixing pressure reducing station including 1 PRV, 2 nos. of Ball/ Butterfly valves (as per specification of item no 3) & gun metal Ball valves and 2nos pressure guages along with isolation valves. PRV shall be Forged brass body, stainless steel seal, O rings: NBR ends(nitrile rubber), Screwed BSP (British standard pipes) female ends and should stand pressure finishure of Max inlet 15 kg/cm2 and outlet range 1.0 to 7.5 kg/cm2 and should be tested at 20 kg/cm2. PRV should have inbuilt calibration setting along with strainer. A bypass system including 1 PRV, 2nos of Butterfly valves (as per specification of item no 3) & gun metal Ball valves. Please refer the technical specification for other valve details. Please refer general fixing details drawings for construction, complete as directed by EIC 80 mm dia (6.0 to 3.5 kg/ cm2) Ground floor

Providing & fixing pressure reducing station including 1 PRV, 2 nos. of Ball/ Butterfly valves (as per specification of item no 3) & gun metal Ball valves and 2nos pressure guages along with isolation valves. PRV shall be Forged brass body, stainless steel seal, O rings: NBR ends(nitrile rubber), Screwed BSP (British standard pipes) female ends and should stand pressure finishure of Max inlet 15 kg/cm2 and outlet range 1.0 to 7.5 kg/cm2 and should be tested at 20 kg/cm2. PRV should have inbuilt calibration setting along with strainer. A bypass system including 1 PRV, 2nos of Butterfly valves (as per specification of item no 3) & gun metal Ball valves. Please refer the technical specification for other valve details. Please refer general fixing details drawings for construction, complete as directed by EIC 65 mm dia (6.0 to 3.5 kg/ cm2) Ground Floor

Providing & fixing pressure reducing station including 1 PRV, 2 nos. of Ball/ Butterfly valves (as per specification of item no 3) & gun metal Ball valves and 2nos pressure guages along with isolation valves. PRV shall be Forged brass body, stainless steel seal, O rings: NBR ends(nitrile rubber), Screwed BSP (British standard pipes) female ends and should stand pressure finishure of Max inlet 15 kg/cm2 and outlet range 1.0 to 7.5 kg/cm2 and should be tested at 20 kg/cm2. PRV should have inbuilt calibration setting along with strainer. A bypass system including 1 PRV, 2nos of Butterfly valves (as per specification of item no 3) & gun metal Ball valves. Please refer the technical specification for other valve details. Please refer general fixing details drawings for construction, complete as directed by EIC 50 mm dia (6.0 to 3.5 kg/ cm2) Ground Floor

Providing & fixing pressure reducing station including 1 PRV, 2 nos. of Ball/ Butterfly valves (as per specification of item no 3) & gun metal Ball valves and 2nos pressure guages along with isolation valves. PRV shall be Forged brass body, stainless steel seal, O rings: NBR ends(nitrile rubber), Screwed BSP (British standard pipes) female ends and should stand pressure finishure of Max inlet 15 kg/cm2 and outlet range 1.0 to 7.5 kg/cm2 and should be tested at 20 kg/cm2. PRV should have inbuilt calibration setting along with strainer. A bypass system including 1 PRV, 2nos of Butterfly valves (as per specification of item no 3) & gun metal Ball valves. Please refer the technical specification for other valve details. Please refer general fixing details drawings for construction, complete as directed by EIC40 mm dia (6.0 to 3.5 kg/ cm2) Ground Flloor

Providing & fixing pressure reducing station including 1 PRV, 2 nos. of Ball/ Butterfly valves (as per specification of item no 3) & gun metal Ball valves and 2nos pressure guages along with isolation valves. PRV shall be Forged brass body, stainless steel seal, O rings: NBR ends(nitrile rubber), Screwed BSP (British standard pipes) female ends and should stand pressure finishure of Max inlet 15 kg/cm2 and outlet range 1.0 to 7.5 kg/cm2 and should be tested at 20 kg/cm2. PRV should have inbuilt calibration setting along with strainer. A bypass system including 1 PRV, 2nos of Butterfly valves (as per specification of item no 3) & gun metal Ball valves. Please refer the technical specification for other valve details. Please refer general fixing details drawings for construction, complete as directed by EIC 32 mm dia (6.0 to 3.5 kg/ cm2)

Providing & fixing pressure reducing station including 1 PRV, 2 nos. of Ball/ Butterfly valves (as per specification of item no 3) & gun metal Ball valves and 2nos pressure guages along with isolation valves. PRV shall be Forged brass body, stainless steel seal, O rings: NBR ends(nitrile rubber), Screwed BSP (British standard pipes) female ends and should stand pressure finishure of Max inlet 15 kg/cm2 and outlet range 1.0 to 7.5 kg/cm2 and should be tested at 20 kg/cm2. PRV should have inbuilt calibration setting along with strainer. A bypass system including 1 PRV, 2nos of Butterfly valves (as per specification of item no 3) & gun metal Ball valves. Please refer the technical specification for other valve details. Please refer general fixing details drawings for construction, complete as directed by EIC25 mm dia (6.0 to 3.5 kg/ cm2)

Providing and fixing of brass body nickel plated automatic air release valves with brass splindle, NBR(nitrile butadiene Rubber) and join franite elastomer, stainless steel spring polypropylenic float at the top most points of water supply distribution risers in the shafts.valve, complete as directed by EICSecond Floor

Third Floor

Seventh Floor

Terrace Floor

155. aSupply, installation, testing and commissioning of water flow sensors Size designed to match with the pipe sizes (valves and by pass arrangement), with necessary accessories.The cost shall also include the panels (panels should be BMS compatible),cabling for the water meters and PLC controlled with modbus output, complete as directed by EIC Supply,testing,installation and commissioning of RS 485 model for water meter integration, - Transmitter with operating voltage 12 V to 28 VDC and operating temperature -4 deg C to 80 Deg C. complete as directed by EIC

155.b Supply, installation, testing and commissioning of water flow sensors Size designed to match with the pipe sizes (valves and by pass arrangement), with necessary accessories.The cost shall also include the panels (panels should be BMS compatible),cabling for the water meters and PLC controlled with modbus output, complete as directed by EICSupply,testing,installation and commissioning of 3 core shielded cable Polytetrafluoroethylene (PTFE)cable with excellent thermal stability suitable for -60 Deg C to + 260 Deg C, cable from water flow sesor to RS 485 Transmitter, complete as directed by EIC Ground floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Terrace Floor

155 c Supply, installation, testing and commissioning of water flow sensors Size designed to match with the pipe sizes (valves and by pass arrangement), with necessary accessories.The cost shall also include the panels (panels should be BMS compatible),cabling for the water meters and PLC controlled with modbus output, complete as directed by EIC Supply,testing,installation and commissioning of Communication cable From Transmitter to Transmitter-1sqmm 2 core FRLS shielded cable, complete as directed by EIC

155 d Supply, installation, testing and commissioning of water flow sensors Size designed to match with the pipe sizes (valves and by pass arrangement), with necessary accessories.The cost shall also include the panels (panels should be BMS compatible),cabling for the water meters and PLC controlled with modbus output, complete as directed by EICSupply,testing,installation and commissioning of FRLS PVC conduits, complete as directed by EIC

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Terrace Floor

155 e(i) Supply, installation, testing and commissioning of water flow sensors Size designed to match with the pipe sizes (valves and by pass arrangement), with necessary accessories.The cost shall also include the panels (panels should be BMS compatible),cabling for the water meters and PLC controlled with modbus output, complete as directed by EICSupply, installation, testing and commissioning of water flow sensors Size designed to match with the pipe sizes (valves and by pass arrangement), with necessary accessories.The cost shall also include the panels (panels should be BMS compatible),cabling for the water meters and PLC controlled with modbus output, complete as directed by EICWater flow sensors, complete as directed by EIC 20 mm dia

Lower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

155 (e) ii Supply, installation, testing and commissioning of water flow sensors Size designed to match with the pipe sizes (valves and by pass arrangement), with necessary accessories.The cost shall also include the panels (panels should be BMS compatible),cabling for the water meters and PLC controlled with modbus output, complete as directed by EIC Supply, installation, testing and commissioning of water flow sensors Size designed to match with the pipe sizes (valves and by pass arrangement), with necessary accessories.The cost shall also include the panels (panels should be BMS compatible),cabling for the water meters and PLC controlled with modbus output, complete as directed by EICWater flow sensors, complete as directed by EIC 25 mm dia

Ground Floor

Second Floor

155 (e) iii Supply, installation, testing and commissioning of water flow sensors Size designed to match with the pipe sizes (valves and by pass arrangement), with necessary accessories.The cost shall also include the panels (panels should be BMS compatible),cabling for the water meters and PLC controlled with modbus output, complete as directed by EIC Supply, installation, testing and commissioning of water flow sensors Size designed to match with the pipe sizes (valves and by pass arrangement), with necessary accessories.The cost shall also include the panels (panels should be BMS compatible),cabling for the water meters and PLC controlled with modbus output, complete as directed by EICWater flow sensors, complete as directed by EIC Lower Ground Floor 32mm dia

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

155 (e) iv Supply, installation, testing and commissioning of water flow sensors Size designed to match with the pipe sizes (valves and by pass arrangement), with necessary accessories.The cost shall also include the panels (panels should be BMS compatible),cabling for the water meters and PLC controlled with modbus output, complete as directed by EIC Supply, installation, testing and commissioning of water flow sensors Size designed to match with the pipe sizes (valves and by pass arrangement), with necessary accessories.The cost shall also include the panels (panels should be BMS compatible),cabling for the water meters and PLC controlled with modbus output, complete as directed by EICWater flow sensors, complete as directed by EIC Lower Ground Floor 40 mm dia

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

155 (e) v Supply, installation, testing and commissioning of water flow sensors Size designed to match with the pipe sizes (valves and by pass arrangement), with necessary accessories.The cost shall also include the panels (panels should be BMS compatible),cabling for the water meters and PLC controlled with modbus output, complete as directed by EIC Supply, installation, testing and commissioning of water flow sensors Size designed to match with the pipe sizes (valves and by pass arrangement), with necessary accessories.The cost shall also include the panels (panels should be BMS compatible),cabling for the water meters and PLC controlled with modbus output, complete as directed by EICWater flow sensors, complete as directed by EIC Lower Ground Floor 50 mm dia Lower Ground Floor

Ground Floor

155 (e)vi Supply, installation, testing and commissioning of water flow sensors Size designed to match with the pipe sizes (valves and by pass arrangement), with necessary accessories.The cost shall also include the panels (panels should be BMS compatible),cabling for the water meters and PLC controlled with modbus output, complete as directed by EIC Supply, installation, testing and commissioning of water flow sensors Size designed to match with the pipe sizes (valves and by pass arrangement), with necessary accessories.The cost shall also include the panels (panels should be BMS compatible),cabling for the water meters and PLC controlled with modbus output, complete as directed by EICWater flow sensors, complete as directed by EIC Lower Ground Floor 65 mm dia Ground Floor

155 (e) vii Supply, installation, testing and commissioning of water flow sensors Size designed to match with the pipe sizes (valves and by pass arrangement), with necessary accessories.The cost shall also include the panels (panels should be BMS compatible),cabling for the water meters and PLC controlled with modbus output, complete as directed by EIC Supply, installation, testing and commissioning of water flow sensors Size designed to match with the pipe sizes (valves and by pass arrangement), with necessary accessories.The cost shall also include the panels (panels should be BMS compatible),cabling for the water meters and PLC controlled with modbus output, complete as directed by EICWater flow sensors, complete as directed by EIC Lower Ground Floor 80 mm dia Ground Floor

155 (e) viii Supply, installation, testing and commissioning of water flow sensors Size designed to match with the pipe sizes (valves and by pass arrangement), with necessary accessories.The cost shall also include the panels (panels should be BMS compatible),cabling for the water meters and PLC controlled with modbus output, complete as directed by EIC Supply, installation, testing and commissioning of water flow sensors Size designed to match with the pipe sizes (valves and by pass arrangement), with necessary accessories.The cost shall also include the panels (panels should be BMS compatible),cabling for the water meters and PLC controlled with modbus output, complete as directed by EICWater flow sensors, complete as directed by EIC Lower Ground Floor 32mm dia Ground Floor

155 (e)ix Supply, installation, testing and commissioning of water flow sensors Size designed to match with the pipe sizes (valves and by pass arrangement), with necessary accessories.The cost shall also include the panels (panels should be BMS compatible),cabling for the water meters and PLC controlled with modbus output, complete as directed by EIC Supply, installation, testing and commissioning of water flow sensors Size designed to match with the pipe sizes (valves and by pass arrangement), with necessary accessories.The cost shall also include the panels (panels should be BMS compatible),cabling for the water meters and PLC controlled with modbus output, complete as directed by EICWater flow sensors, complete as directed by EIC Lower Ground Floor 32mm diaGround Floor

20 mm Supply and fixing thermal insulation over hot water pipesexposed or concealed with 6 mm thick up to 50mm and above 50mm 9mm thick approved make thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber having density of 60-90 Kg/m3 over pipes of following sizes including all required accessories complete as per manufacture's specifications. Joints of insulation should be applied with self adhesive tapes of rayon materials and polished protective coating with sun radiating protective cloth cladding complete as directed by EIC 20 mm dia Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Terrace Floor

25 mm dia- Supply and fixing thermal insulation over hot water pipesexposed or concealed with 6 mm thick up to 50mm and above 50mm 9mm thick approved make thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber having density of 60-90 Kg/m3 over pipes of following sizes including all required accessories complete as per manufacture's specifications. Joints of insulation should be applied with self adhesive tapes of rayon materials and polished protective coating with sun radiating protective cloth cladding complete as directed by EIC 25 mm dia Ground Floor Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

32 mmm dia Supply and fixing thermal insulation over hot water pipesexposed or concealed with 6 mm thick up to 50mm and above 50mm 9mm thick approved make thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber having density of 60-90 Kg/m3 over pipes of following sizes including all required accessories complete as per manufacture's specifications. Joints of insulation should be applied with self adhesive tapes of rayon materials and polished protective coating with sun radiating protective cloth cladding complete as directed by EIC 32 mm dia Ground FloorGround Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Terrace Floor

50 mm Supply and fixing thermal insulation over hot water pipesexposed or concealed with 6 mm thick up to 50mm and above 50mm 9mm thick approved make thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber having density of 60-90 Kg/m3 over pipes of following sizes including all required accessories complete as per manufacture's specifications. Joints of insulation should be applied with self adhesive tapes of rayon materials and polished protective coating with sun radiating protective cloth cladding complete as directed by EIC 50 mm dia Ground Floor Ground Floor

First Floor

Second Floor

Third Floor

Terrace Floor

65 mm Supply and fixing thermal insulation over hot water pipesexposed or concealed with 6 mm thick up to 50mm and above 50mm 9mm thick approved make thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber having density of 60-90 Kg/m3 over pipes of following sizes including all required accessories complete as per manufacture's specifications. Joints of insulation should be applied with self adhesive tapes of rayon materials and polished protective coating with sun radiating protective cloth cladding complete as directed by EIC 65 mm dia Ground FloorThird Floor

Fourth Floor

Fifth Floor

80 mm Supply and fixing thermal insulation over hot water pipesexposed or concealed with 6 mm thick up to 50mm and above 50mm 9mm thick approved make thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber having density of 60-90 Kg/m3 over pipes of following sizes including all required accessories complete as per manufacture's specifications. Joints of insulation should be applied with self adhesive tapes of rayon materials and polished protective coating with sun radiating protective cloth cladding complete as directed by EIC 80 mm dia Ground Floor Fifth Floor

Sixth Floor

Supply, Installing, testing and commissioning of Sink with single bowl and single drain board manufactured from 8 mm thick stainless steel, 18 G high grade indestructable chrome nickel steel with top quality polish, 1 no. 40 mm dia CP waste coupling, with 15 mm dia CP sink cock with swivel spout wall mounted type and necessary wall flanges etc., complete as directed by EIC. Flow rate-1.8 LPMLower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Supply, Installing, testing and commissioning of Sink with single bowl and without drain board manufactured from 8 mm thick stainless steel, 18 G high grade indestructable chrome nickel steel with top quality polish, 1 no. 40 mm dia CP waste coupling, with 15 mm dia CP sink cock with swivel spout wall mounted type and necessary wall flanges etc., complete as directed by EIC. Flow rate-1.8 LPMFirst Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Supply, Installing, testing and commissioning of Sink with Double bowl and with drain board manufactured from 8 mm thick stainless steel, 18 G high grade indestructable chrome nickel steel with top quality polish, 1 no. 40 mm dia CP waste coupling, with 15 mm dia CP sink cock with swivel spout wall mounted type and necessary wall flanges etc.,complete as directed by EIC. Flow rate-1.8 LPM

25 mm dia -Supplying, installing, testing and commissioning of approved make electrically operated solenoid valve with level controllers to be fixed in the OHT. The system shall consist of bypass line. The cost of valve shall also include necessary level switches, wiring upto control panel at terrace level and control panel etc., complete as directed by EIC Terrace Floor 25 mm dia

32 mm dia Supplying, installing, testing and commissioning of approved make electrically operated solenoid valve with level controllers to be fixed in the OHT. The system shall consist of bypass line. The cost of valve shall also include necessary level switches, wiring upto control panel at terrace level and control panel etc., complete as directed by EIC 32 mm dia Third Floor

Seventh Floor

Terrace Floor

Supply, Installing, testing and commissioning of Floor mounted European Water Closet with 'P' or 'S' trap, with all parts such as Concealed Cistern, Connection pipes, Push plate, rag bolts, chair brackets, seat cover, inlet & outlet pipes etc.,complete as directed by EIC Lower Ground Floor

Ground Floor

First Floor

Second Floor

Supply, Installing, testing and commissioning of Rectangular wall mounted wash basin of approved colour , with 32mm dia CP 'waste coupling, 32 mm dia. CP bottle trap with extension pipe, C.I wall brackets with a pair of SS screws to support the basin,1no. 15mm CP Sensor faucet (Electrically Operated) with casted spout, 15mm CP 'angle valve with 450mm long CP inlet braided hose connection pipe, CP wall flange all of approved make, complete as directed by EIC. (Flow rate should be 1.8 LPM) Lower Ground Floor

Ground Floor

First Floor

Second Floor

Supply and fixing superior quality of SS 304 grade approved type of pedal operated Dust Bin with plastic bucket having inner dia of 175 mm dia and height 275 mm with 3 mm thick and SS 304 perforated dust bin with 2.5 mm thick in all toilet area and whrere ever required as directed by engineer inchargeLower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Supply, Installing, testing and commissioning of CP Twin Coat hook fixed with SS screws & PVC set screws on to the toilet door, etc complete as directed by EICLower Ground Floor

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Handicapp toilet : 1.Supply & Fixing 1 Nos. support arms and backrest to mounted on the track (vertically and laterally) for handicap toilet(1Set) complete as directed by EIC.(3 Nos 600 mm length & 1 no 450 mm Length)Lower Ground Floor

Ground Floor

First Floor

Second Floor

Supply and fixing of approved make 4mm thick acrylic coloured Bathtub of size 168X76.5X47.5 C with pedestal etc.,. The bathtub is fitted with the following matt chrome finish fittings like 1 No of 4-Way divertor concealed fitting with built - in non return valve with handle, e, 1 No matt chrome finish 190mm dia Rain shower (Overhead) with Rubit Cleaning system, 1 No 15mm bath tub spout with button attachment for telephone shower swivel wall hook and bathtub waste overflow set complete with overflow cap, 450mm ball chain, Rubber plug and union bend with brass nuts etc., complete all of approved make, complete as directed by EIC First Floor

Providing and fixing of Stainless steel Soap Dish of approved make with SS screws & PVC set screws to fix soap dish , etc complete as directed by EIC Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

65 mm Supply, Delivery, storing, safeguarding,,Shifting to work place,Installation, Testing and Commissioning of Chlorinated Polyvinyl Chloride pipes (CPVC) of Sch -80 as per IS 15778:2007 & ASTM -F 441 with all CPVC fittings and specials such as tees, elbows, couplers etc with CPVC brass threaded combination/transition specials such as male adopters brass threaded, female adopters brass threaded, brass FABT tee, brass FABT elbow etc where connection with metal is to be made including cutting holes and chases in walls and floors and refilling it by cement mortar of 1:3 mix (1 Portland Cement : 3 hard settling cement compound) and making good the walls etc as directed by the Engineer in charge. Joints to be made with CPVC solvent as per ASTM F 493 complete. Rates shalll include the cost of all supports & accessories such as universal clamps, threaded rods (10mm),anchor fasteners etc., complete as directed by EICLower Ground Floor 65 mm dia

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

80 mm Supply, Delivery, storing, safeguarding,,Shifting to work place,Installation, Testing and Commissioning of Chlorinated Polyvinyl Chloride pipes (CPVC) of Sch -80 as per IS 15778:2007 & ASTM -F 441 with all CPVC fittings and specials such as tees, elbows, couplers etc with CPVC brass threaded combination/transition specials such as male adopters brass threaded, female adopters brass threaded, brass FABT tee, brass FABT elbow etc where connection with metal is to be made including cutting holes and chases in walls and floors and refilling it by cement mortar of 1:3 mix (1 Portland Cement : 3 hard settling cement compound) and making good the walls etc as directed by the Engineer in charge. Joints to be made with CPVC solvent as per ASTM F 493 complete. Rates shalll include the cost of all supports & accessories such as universal clamps, threaded rods (10mm),anchor fasteners etc., complete as directed by EICLower Ground FloorGround Floor 80 mm dia

First Floor

Second Floor

Fourth Floor

Fifth Floor

Sixth Floor

5000 lit Supplying,testing and commissioning of Glassfiber Reinforced Thermoset Polyester which is Hot Pressed and Compression moulded GRP tank will have SMC Manhole Panel of 600mm dia. clearance with lockable lid.GRP tank will have SMC moulded Air-vent of 110mm dia. with moulded polyamide mosquioto proof mesh.fasteners will be Hot Dip Galvanized (HDG) material of M12x45 bolts.GRP panel tank will have UPVC Roof Support Pipes at every 2m diagonal, to avoid sagging of the roof panels.5000 LTS

10000 lit Supplying,testing and commissioning of Glassfiber Reinforced Thermoset Polyester which is Hot Pressed and Compression moulded GRP tank will have SMC Manhole Panel of 600mm dia. clearance with lockable lid.GRP tank will have SMC moulded Air-vent of 110mm dia. with moulded polyamide mosquioto proof mesh.fasteners will be Hot Dip Galvanized (HDG) material of M12x45 bolts.GRP panel tank will have UPVC Roof Support Pipes at every 2m diagonal, to avoid sagging of the roof panels.10000 Lts

15000 lit Supplying,testing and commissioning of Glassfiber Reinforced Thermoset Polyester which is Hot Pressed and Compression moulded GRP tank will have SMC Manhole Panel of 600mm dia. clearance with lockable lid.GRP tank will have SMC moulded Air-vent of 110mm dia. with moulded polyamide mosquioto proof mesh.fasteners will be Hot Dip Galvanized (HDG) material of M12x45 bolts.GRP panel tank will have UPVC Roof Support Pipes at every 2m diagonal, to avoid sagging of the roof panels.15000 Lts

25000 lit Supplying,testing and commissioning of Glassfiber Reinforced Thermoset Polyester which is Hot Pressed and Compression moulded GRP tank will have SMC Manhole Panel of 600mm dia. clearance with lockable lid.GRP tank will have SMC moulded Air-vent of 110mm dia. with moulded polyamide mosquioto proof mesh.fasteners will be Hot Dip Galvanized (HDG) material of M12x45 bolts.GRP panel tank will have UPVC Roof Support Pipes at every 2m diagonal, to avoid sagging of the roof panels.25000 Lts

25000 lit Supplying,testing and commissioning of Glassfiber Reinforced Thermoset Polyester which is Hot Pressed and Compression moulded GRP tank will have SMC Manhole Panel of 600mm dia. clearance with lockable lid.GRP tank will have SMC moulded Air-vent of 110mm dia. with moulded polyamide mosquioto proof mesh.fasteners will be Hot Dip Galvanized (HDG) material of M12x45 bolts.GRP panel tank will have UPVC Roof Support Pipes at every 2m diagonal, to avoid sagging of the roof panels.25000 Lts

100 mm dia Providing, Supplying & sleeve of required dia outlets using low vibration mechanical means. Cost to include identification of embedded reinforcement using proformeter, closing of core cut using self sealing nonshrink grouts of approved make either single or double component with necessary form work, staging, tools, etc., Lower Ground Floor 100 mm dia

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

125 mm dia - Providing, Supplying & sleeve of required dia outlets using low vibration mechanical means. Cost to include identification of embedded reinforcement using proformeter, closing of core cut using self sealing nonshrink grouts of approved make either single or double component with necessary form work, staging, tools, etc.,Lower Ground Floor 125 mm dia

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

175 mm dia - Providing, Supplying & sleeve of required dia outlets using low vibration mechanical means. Cost to include identification of embedded reinforcement using proformeter, closing of core cut using self sealing nonshrink grouts of approved make either single or double component with necessary form work, staging, tools, etc.,Lower Ground Floor 175 mm dia

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Seventh Floor

Providing and fixing 45 cm wide mild steel ladder of 40mm x 6 mm mild steel flat stringers and steps of 18 mm dia. mild steel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60cm x 30cm x 30cm and painting the ladder complete as directed by EIC. (Anti Corossive Paint)

110 mm dia - Providing, fixing, jointing, testing and commissioning of SN-8 Underground drainage system for soil and waste water, with tripple layer piping system manufactured under Foam Core Technology, conforming to IS:16098-1 & Fittings are mfg. as per EN 1401-1, cut to required lengths including all necessary fittings and specials such as Bends, Clean out plugs, junctions, offsets, access pieces (plain or door) to inspection chambers / manholes with direction arrows are per the approval of EIC. Fixing at wall/ceiling level supported by steel clamps & hangers etc, complete as directed by EIC Refer as per Master Rate analysis Item No 170B 110 mm dia

160 mm dia Providing, fixing, jointing, testing and commissioning of SN-8 Underground drainage system for soil and waste water, with tripple layer piping system manufactured under Foam Core Technology, conforming to IS:16098-1 & Fittings are mfg. as per EN 1401-1, cut to required lengths including all necessary fittings and specials such as Bends, Clean out plugs, junctions, offsets, access pieces (plain or door) to inspection chambers / manholes with direction arrows are per the approval of EIC. Fixing at wall/ceiling level supported by steel clamps & hangers etc, complete as directed by EIC Refer as per Master Rate analysis Item No 170B 160 mm dia

200 mm dia -Providing, fixing, jointing, testing and commissioning of SN-8 Underground drainage system for soil and waste water, with tripple layer piping system manufactured under Foam Core Technology, conforming to IS:16098-1 & Fittings are mfg. as per EN 1401-1, cut to required lengths including all necessary fittings and specials such as Bends, Clean out plugs, junctions, offsets, access pieces (plain or door) to inspection chambers / manholes with direction arrows are per the approval of EIC. Fixing at wall/ceiling level supported by steel clamps & hangers etc, complete as directed by EIC Refer as per Master Rate analysis Item No 170B200 mm dia

250 mm dia - Providing, fixing, jointing, testing and commissioning of SN-8 Underground drainage system for soil and waste water, with tripple layer piping system manufactured under Foam Core Technology, conforming to IS:16098-1 & Fittings are mfg. as per EN 1401-1, cut to required lengths including all necessary fittings and specials such as Bends, Clean out plugs, junctions, offsets, access pieces (plain or door) to inspection chambers / manholes with direction arrows are per the approval of EIC. Fixing at wall/ceiling level supported by steel clamps & hangers etc, complete as directed by EIC Refer as per Master Rate analysis Item No 170B250 mm dia

315 mm dia- Providing, fixing, jointing, testing and commissioning of SN-8 Underground drainage system for soil and waste water, with tripple layer piping system manufactured under Foam Core Technology, conforming to IS:16098-1 & Fittings are mfg. as per EN 1401-1, cut to required lengths including all necessary fittings and specials such as Bends, Clean out plugs, junctions, offsets, access pieces (plain or door) to inspection chambers / manholes with direction arrows are per the approval of EIC. Fixing at wall/ceiling level supported by steel clamps & hangers etc, complete as directed by EIC Refer as per Master Rate analysis Item No 170B315 mm dia

62.50 mm nominal inner dia. Pipes. - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External workChlorinated Polyvinyl Chloride pipes (CPVC) of SCH 80 as per IS 15778:2007 & ASTM -F 441, Joints to be made with CPVC solvent as per ASTM F 493 complete 62.50 mm nominal inner dia. Pipes.

75 mm nominal inner dia. Pipes. - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External workChlorinated Polyvinyl Chloride pipes (CPVC) of SCH 80 as per IS 15778:2007 & ASTM -F 441, Joints to be made with CPVC solvent as per ASTM F 493 complete 75 mm nominal inner dia. Pipes.

100 mm nominal inner dia. Pipes. - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External workChlorinated Polyvinyl Chloride pipes (CPVC) of SCH 80 as per IS 15778:2007 & ASTM -F 441, Joints to be made with CPVC solvent as per ASTM F 493 complete 100mm nominal inner dia. Pipes.

150 mm nominal inner dia. Pipes. - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External workChlorinated Polyvinyl Chloride pipes (CPVC) of SCH 80 as per IS 15778:2007 & ASTM -F 441, Joints to be made with CPVC solvent as per ASTM F 493 complete 150 mm nominal inner dia. Pipes.

180 mm dia- Supply, fixing and testing HDPE (High Density polyethylene) pipes of PE 100 grade and 10 Kg/cm2 (pressure Nominal) rating with joint inclusive of all necessary with all fittings like Bends, Y branch, couplings, Reducers, clean-outs, corresponding to all diameters and necessary fastening material including pipe brackets, steel rail and accessories ( including pipe nipple, nut , anchor fasteners, screws, sealants), complete as directed by EIC 180 mm dia

125 mm dia - Supply, fixing and testing HDPE (High Density polyethylene) pipes of PE 100 grade and 10 Kg/cm2 (pressure Nominal) rating with joint inclusive of all necessary with all fittings like Bends, Y branch, couplings, Reducers, clean-outs, corresponding to all diameters and necessary fastening material including pipe brackets, steel rail and accessories ( including pipe nipple, nut , anchor fasteners, screws, sealants), complete as directed by EIC125 mm Dia

110 mm dia - Supply, fixing and testing HDPE (High Density polyethylene) pipes of PE 100 grade and 10 Kg/cm2 (pressure Nominal) rating with joint inclusive of all necessary with all fittings like Bends, Y branch, couplings, Reducers, clean-outs, corresponding to all diameters and necessary fastening material including pipe brackets, steel rail and accessories ( including pipe nipple, nut , anchor fasteners, screws, sealants), complete as directed by EIC110 mm Dia

90 mm dia- Supply, fixing and testing HDPE (High Density polyethylene) pipes of PE 100 grade and 10 Kg/cm2 (pressure Nominal) rating with joint inclusive of all necessary with all fittings like Bends, Y branch, couplings, Reducers, clean-outs, corresponding to all diameters and necessary fastening material including pipe brackets, steel rail and accessories ( including pipe nipple, nut , anchor fasteners, screws, sealants), complete as directed by EIC90 mm dia

50 mm dia -Supply, fixing and testing HDPE (High Density polyethylene) pipes of PE 100 grade and 10 Kg/cm2 (pressure Nominal) rating with joint inclusive of all necessary with all fittings like Bends, Y branch, couplings, Reducers, clean-outs, corresponding to all diameters and necessary fastening material including pipe brackets, steel rail and accessories ( including pipe nipple, nut , anchor fasteners, screws, sealants), complete as directed by EIC50 mm Dia

150 mm dia- Supplying and fixing in position approved make CI non-return valve conforming to IS 778 with unions,flanges etc.,complete as directed by EIC150 mm dia

125 mm dia- Supplying and fixing in position approved make CI non-return valve conforming to IS 778 with unions,flanges etc.,complete as directed by EIC150 mm125 mm dia

100 mm dia- Supplying and fixing in position approved make CI non-return valve conforming to IS 778 with unions,flanges etc.,complete as directed by EIC150 mm100 mm dia

50 mm dia- Supplying and fixing in position approved make CI non-return valve conforming to IS 778 with unions,flanges etc.,complete as directed by EIC150 mm50 mm dia

Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc.complete as directed by EIC (The tail pieces if required will be paid separately) : 100 mm dia nominal bore

Providing and laying concrete pipes of NP-2 class of 150mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete as directed by EIC.

Providing and laying concrete pipes of NP-2 class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trenchcomplete as directed by EIC

Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 450mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete as directed by EIC

Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 800mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc.complete as directed by EIC

Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 900mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc.complete as directed by EIC

Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 1200mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete as directed by EIC

Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : complete as directed by EIC Manhole to be constructed with Sewer bricks comforming to IS 4885

Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : complete as directed by EIC Manhole to be constructed with Sewer bricks comforming to IS 4885 completes as directed by EIC

Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement Manhole depth up to 2.3 mts, all complete as per standard design :complete as directed by EIC Manhole to be constructed with With Sewer bricks conforming to IS : 4885

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) complete as per design. complete as directed by EIC.

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions,without cover with frame , R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 coarse sand (Zone III) : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : complete as directed by EIC. Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

PUDDLE FLANGES FOR UNDERGROUND SUMP & ACCESSORIESSupply & fixing, testing and commissioning of GI Class C puddle flanges of required sizes for inlet, outlet, vent and overflow pipes for master underground sump. The puddle flanges shall be threaded end upto 80mm dia and flanged ends above 100mm dia. All the puddle flanges, plates and fittings shall be galvanized after fabrication as per IS specifications.. The scope work also includes supply, installation and testing of aluminium ladder, Cast Iron manhole frame and cover for master underground water tank etc., complete as per specifications and drawings. complete as directed by EIC.200mm dia GI puddle flange

PUDDLE FLANGES FOR UNDERGROUND SUMP & ACCESSORIESSupply & fixing, testing and commissioning of GI Class C puddle flanges of required sizes for inlet, outlet, vent and overflow pipes for master underground sump. The puddle flanges shall be threaded end upto 80mm dia and flanged ends above 100mm dia. All the puddle flanges, plates and fittings shall be galvanized after fabrication as per IS specifications.. The scope work also includes supply, installation and testing of aluminium ladder, Cast Iron manhole frame and cover for master underground water tank etc., complete as per specifications and drawings. complete as directed by EIC.150mm dia GI puddle flange

PUDDLE FLANGES FOR UNDERGROUND SUMP & ACCESSORIESSupply & fixing, testing and commissioning of GI Class C puddle flanges of required sizes for inlet, outlet, vent and overflow pipes for master underground sump. The puddle flanges shall be threaded end upto 80mm dia and flanged ends above 100mm dia. All the puddle flanges, plates and fittings shall be galvanized after fabrication as per IS specifications.. The scope work also includes supply, installation and testing of aluminium ladder, Cast Iron manhole frame and cover for master underground water tank etc., complete as per specifications and drawings. complete as directed by EIC.100mm dia GI puddle flange

PUDDLE FLANGES FOR UNDERGROUND SUMP & ACCESSORIESSupply & fixing, testing and commissioning of GI Class C puddle flanges of required sizes for inlet, outlet, vent and overflow pipes for master underground sump. The puddle flanges shall be threaded end upto 80mm dia and flanged ends above 100mm dia. All the puddle flanges, plates and fittings shall be galvanized after fabrication as per IS specifications.. The scope work also includes supply, installation and testing of aluminium ladder, Cast Iron manhole frame and cover for master underground water tank etc., complete as per specifications and drawings. complete as directed by EIC.80mm dia GI puddle flange

PUDDLE FLANGES FOR UNDERGROUND SUMP & ACCESSORIESSupply & fixing, testing and commissioning of GI Class C puddle flanges of required sizes for inlet, outlet, vent and overflow pipes for master underground sump. The puddle flanges shall be threaded end upto 80mm dia and flanged ends above 100mm dia. All the puddle flanges, plates and fittings shall be galvanized after fabrication as per IS specifications.. The scope work also includes supply, installation and testing of aluminium ladder, Cast Iron manhole frame and cover for master underground water tank etc., complete as per specifications and drawings. complete as directed by EIC.65mm dia GI puddle flange

PUDDLE FLANGES FOR UNDERGROUND SUMP & ACCESSORIESSupply & fixing, testing and commissioning of GI Class C puddle flanges of required sizes for inlet, outlet, vent and overflow pipes for master underground sump. The puddle flanges shall be threaded end upto 80mm dia and flanged ends above 100mm dia. All the puddle flanges, plates and fittings shall be galvanized after fabrication as per IS specifications.. The scope work also includes supply, installation and testing of aluminium ladder, Cast Iron manhole frame and cover for master underground water tank etc., complete as per specifications and drawings. complete as directed by EIC.50mm dia GI puddle flange

PUDDLE FLANGES FOR UNDERGROUND SUMP & ACCESSORIESSupply & fixing, testing and commissioning of GI Class C puddle flanges of required sizes for inlet, outlet, vent and overflow pipes for master underground sump. The puddle flanges shall be threaded end upto 80mm dia and flanged ends above 100mm dia. All the puddle flanges, plates and fittings shall be galvanized after fabrication as per IS specifications.. The scope work also includes supply, installation and testing of aluminium ladder, Cast Iron manhole frame and cover for master underground water tank etc., complete as per specifications and drawings. complete as directed by EIC.

PUDDLE FLANGES FOR UNDERGROUND SUMP & ACCESSORIESSupply & fixing, testing and commissioning of GI Class C puddle flanges of required sizes for inlet, outlet, vent and overflow pipes for master underground sump. The puddle flanges shall be threaded end upto 80mm dia and flanged ends above 100mm dia. All the puddle flanges, plates and fittings shall be galvanized after fabrication as per IS specifications.. The scope work also includes supply, installation and testing of aluminium ladder, Cast Iron manhole frame and cover for master underground water tank etc., complete as per specifications and drawings. complete as directed by EIC.32mm dia GI puddle flange

PUDDLE FLANGES FOR UNDERGROUND SUMP & ACCESSORIESSupply & fixing, testing and commissioning of GI Class C puddle flanges of required sizes for inlet, outlet, vent and overflow pipes for master underground sump. The puddle flanges shall be threaded end upto 80mm dia and flanged ends above 100mm dia. All the puddle flanges, plates and fittings shall be galvanized after fabrication as per IS specifications.. The scope work also includes supply, installation and testing of aluminium ladder, Cast Iron manhole frame and cover for master underground water tank etc., complete as per specifications and drawings. complete as directed by EIC.25mm dia GI puddle flange

PUDDLE FLANGES FOR UNDERGROUND SUMP & ACCESSORIESSupply & fixing, testing and commissioning of GI Class C puddle flanges of required sizes for inlet, outlet, vent and overflow pipes for master underground sump. The puddle flanges shall be threaded end upto 80mm dia and flanged ends above 100mm dia. All the puddle flanges, plates and fittings shall be galvanized after fabrication as per IS specifications.. The scope work also includes supply, installation and testing of aluminium ladder, Cast Iron manhole frame and cover for master underground water tank etc., complete as per specifications and drawings. complete as directed by EIC.Ductile iron frame and cover medium duty of weight 75kgs. size 600x600 mm

PUDDLE FLANGES FOR UNDERGROUND SUMP & ACCESSORIESSupply & fixing, testing and commissioning of GI Class C puddle flanges of required sizes for inlet, outlet, vent and overflow pipes for master underground sump. The puddle flanges shall be threaded end upto 80mm dia and flanged ends above 100mm dia. All the puddle flanges, plates and fittings shall be galvanized after fabrication as per IS specifications.. The scope work also includes supply, installation and testing of aluminium ladder, Cast Iron manhole frame and cover for master underground water tank etc., complete as per specifications and drawings. complete as directed by EIC.Ductile iron frame and cover Light duty of weight 38kgs. size 600x600 mm

PUDDLE FLANGES FOR UNDERGROUND SUMP & ACCESSORIESSupply & fixing, testing and commissioning of GI Class C puddle flanges of required sizes for inlet, outlet, vent and overflow pipes for master underground sump. The puddle flanges shall be threaded end upto 80mm dia and flanged ends above 100mm dia. All the puddle flanges, plates and fittings shall be galvanized after fabrication as per IS specifications.. The scope work also includes supply, installation and testing of aluminium ladder, Cast Iron manhole frame and cover for master underground water tank etc., complete as per specifications and drawings. complete as directed by EIC. Vent with mosquito proof mesh 80mm dia

PUDDLE FLANGES FOR UNDERGROUND SUMP & ACCESSORIESSupply & fixing, testing and commissioning of GI Class C puddle flanges of required sizes for inlet, outlet, vent and overflow pipes for master underground sump. The puddle flanges shall be threaded end upto 80mm dia and flanged ends above 100mm dia. All the puddle flanges, plates and fittings shall be galvanized after fabrication as per IS specifications.. The scope work also includes supply, installation and testing of aluminium ladder, Cast Iron manhole frame and cover for master underground water tank etc., complete as per specifications and drawings. complete as directed by EIC. Vent with mosquito proof mesh Supply & fixing of encapsulated PVC steps for UG tanks & Over head tanks

Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with Cover with frame etc complete. complete as directed by EIC. Chambers to be built With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 complete as directed by EIC.

Supply, Installing, testing and commissioning of Sink with Double bowl and without drain board manufactured from 8 mm thick stainless steel, 18 G high grade indestructable chrome nickel steel with top quality polish, 1 no. 40 mm dia CP waste coupling, with 15 mm dia CP sink cock with swivel spout wall mounted type and necessary wall flanges etc., complete as directed by EICcomplete. Ground Floor

Providing and fixing false ceiling of teak wood particle board half perforated sheet 12 mm thick including scaffolding, if necessary, all iron work and two coats of oil painting to boards and beading i.e. visible surface etc. complete as directed by EIC. (excluding frame work and runners)

Providing and fixing false ceiling of 10 to 12 mm thick decorative boards of fibrous plaster of paris including scaffolding if necessary all architectural work like mouldings, cornices, coves, domes, cups as per detailed drawings and three coats of spray painting to boards etc.complete as directed by EIC. (excluding frame work, runners and mild steel suspenders).Lower Ground Floor

Providing and fixing false ceiling of 15mm thick as per drawings including powder coated G.I. wall angle of 20 mm x 20 mm x 0.60 mm size, G.I. grid runners of size 15 mm x 38 mm at 600 mm center to center both ways and suspended using G.I. 3 mm wire including fixing using butterfly clips and fasteners including transporting, scaffolding all necessary labour and machinery, finishing etc. complete as directed by EIC

Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 600mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Providing and fixing 4 bin vermicomposed

Supply, Installing, testing and commissioning of 525 Kg Organic Waste converter with bio gas plant,The contractor shall be level the land higher elevation than the sorroundings to avoid water stagnation.The plant shouls be well ventillated.The minum distance of 1.5m should be kept between the plants and walls or foundation.The contractor to provide Raw material storage space within Bio Gas Plant.The Plant should be eco friendly, required raw materials for Bio gas Shall be available within Campus.The Bio gas should produce nutrient rich slurry that can be used for crop production, shall also be help in environmental clean.The plant shall have the following features.1)Mixing Tank, Inlet Pipe,Digestor, Gas Storage dome,outlet pipe and gas pipe line upto usage area,etc complete all as per the direction of EIC.

Providing and fixing 40mm dia copper pipe of approved make for gas connections in kitchen including all fixtures and fastenings, complete, making the damage surface good as directed by EIC

Providing and fixing 25mm dia copper pipe of approved make for gas connections in kitchen including all fixtures and fastenings, complete, making the damage surface good as directed by EIC

Providing and fixing 19mm dia copper pipe of approved make for gas connections in kitchen including all fixtures and fastenings, complete, making the damage surface good as directed by EIC

Providing and fixing 12mm dia copper pipe of approved make for gas connections in kitchen including all fixtures and fastenings, complete, making the damage surface good as directed by EIC

Providing and fixing 20mm dia copper pipe of approved make for gas connections in kitchen including all fixtures and fastenings, complete, making the damage surface good as directed by EIC

Providing and fixing 32mm dia copper pipe of approved make for gas connections in kitchen including all fixtures and fastenings, complete, making the damage surface good as directed by EIC

Supplying and sprinkling of water in whole premises for dust supression as directed by EIC

Providing and constructing non load bearing wall with 200 mm Grinded Horizontally perforated clay hollow blocks with compressive strength not less than 35kg/Sqcm, U value of 1.00 W/m2K, Water Absorption of 15% tolerance on Grinded brick height is +/- 1.00 mm, masonry to be done using POROTHERM Dry Flx. Systeam with 20 mm thick S shape application (Application method need to be followed as per Wienerberger methodology) blocks of size 400mm x 200 mm x 200 mm (12.5 brick per Sqm.) including cost of material, labour charges, scaffolding, curing at all height, complete as per specification & directions of Engineer in charge. Cost shall be inclusive of end bricks to be used at window and door jambs for fixing hold fast. anchors etc.,plastering is to be done as per requirement .and is to be considered seperatly with prior approval of concerned Superitending Engineer.

Providing and constructing non load bearing wall with 150 mm Grinded Horizontally perforated clay hollow blocks with compressive strength not less than 35kg/Sqcm, U value of 1.2 W/m2K, Water Absorption of 15% tolerance on Grinded brick height is+/- 1.00 mm, masonry to be done using Dry Flx. Systeam with 20 mm thick S shape application (Application method need to be followed as per Wienerberger methodology) blocks of size 400mm x 150 mm x 200 mm (12.5 brick per Sqm.) including cost of material, labour charges, scaffolding, curing at all height, complete as per specification & directions of Engineer in charge. Cost shall be inclusive of end bricks to be used at window and door jambs for fixing hold fast. anchors etc.,plastering is to be done as per requirement and is to be considered seperatly

Providing, Fixing, Testing & Commissioning of uPVC pipe of ISI standard, Jain/Supreme/Finolex make with all necessary fittings, including all labours, etc complete all as directed by EIC 63 mm x 10 kg/sq.cm

50 mm x 10 kg/sq.cm

40 mm x 10 kg/sq.cm

32 mm x 10 kg/sq.cm

Providing, Fixing, Testing & Commissioning of 16mm 2.0 to 2.2 lph @ 0.30 cm Class 3 (2.5 kg/cm2)pressure compensating inline dripline of ISI mark, including fittings, all labours,etc complete all as directed by EIC

Providing, Fixing, Testing & Commissioning of 16mm 2 to 3 lph @ 0.40 cm, Class 3, pressure compensating inline dripline of ISI mark, including fittings, all labours, etc complete all as directed by EIC

Providing, Fixing, Testing & Commissioning of 16mm Class 2.5 kg/cm2 Drip Tubing of ISI mark, including fittings, all labours, etc complete all as directed by EIC

Providing, Fixing, Testing & Commissioning of pressure compensating dripper of 4/8/16 lph, including fittings, all labours, etc complete all as directed by EIC

Providing, Fixing, Testing & Commissioning of 3/4” QCV with isolation valve on 40/63 mm pipe solid brass construction Harit make or Equi with MS service saddle and GI pipe riser and all necessary fittings, including all labours, etc complete all as directed by EIC

Providing, Fixing, Testing & Commissioning of QCV Key with hose swivel arrangement of solid brass construction Rainbird/Equi with all necessary fittings, including all labours, etc complete all as directed by EIC

Providing, Fixing, Testing & Commissioning of 63 mm PVC Valve, including all labours,etc complete all as directed by EIC

Providing, Fixing, Testing & Commissioning of 40 mm PVC Valve, including all labours, etc complete all as directed by EIC

Providing, Fixing, Testing & Commissioning of 32 mm PVC Valve, including all labours,etc complete all as directed by EIC

Providing, Fixing, Testing & Commissioning of 50 mm PVC flush valve, including all labours, etc complete all as directed by EIC

Earthwork Excavation, Backfilling with good earth and removal of excess earth Depth of cutting for distribution line = 0.45+pipe dia m including all labours, all taxes if any. Soft strata

Providing, Fixing, Testing & Commissioning of 3/4" Plastic, Y disc Filter for a filtering capacity of designed flow conforming to IS specifications complete with all fittings, including all labours,etc complete all as directed by EIC

Providing, Fixing, Testing & Commissioning of 1" Plastic, Y disc Filter for a filtering capacity of designed flow conforming to IS specifications complete with all fittings, including all labours, etc complete all as directed by EIC

Providing, Fixing, Testing & Commissioning of 2" Plastic, Y disc Filter for a filtering capacity of designed flow conforming to IS specifications complete with all fittings, including all labours, etc complete all as directed by EIC

Providing, Fixing, Testing & Commissioning of Solenoid Valves PGA Angle Valve 2" with manual override including fittings, all labours,etc complete all as directed by EIC Rainbird/TORO/Hunter equivalent

Providing, Fixing, Testing & Commissioning of SolenoidValves PGA Angle Valve 1" with manual override including fittings, all labours, etc complete all as directed by EIC Rainbird/TORO/Hunter equivalent

Providing, Fixing, Testing & Commissioning of SolenoidValves PGA Angle Valve 3/4" with manual override including fittings, all labours, etc complete all as directed by EIC Rainbird/TORO/Hunter equivalent

Providing, Fixing, Testing & Commissioning of 3/4" Dripline control kit (Solenoid Valve&filter) including fittings, all labours,etc complete all as directed by EIC if any. Rainbird/TORO/Hunter equivalent

Providing, Fixing, Testing & Commissioning of 1" Dripline control kit (Solenoid Valve&filter) including fittings, all labours, etc complete all as directed by EIC if any. Rainbird/TORO/Hunter equivalent

Providing, Fixing, Testing & Commissioning of 2" plastic backflow preventer including fittings, all labours, etc complete all as directed by EIC

Providing, Fixing, Testing & Commissioning of 1" plastic backflow preventer includes fittings, all labours, etc complete all as directed by EIC

Providing, Fixing, Testing & Commissioning of 3/4" plastic backflow preventer includes fittings, all labours, etc complete all as directed by EIC

Providing, Fixing, Testing & Commissioning of Pressure regulator for SolenoidValves including fittings, all labours, etc complete all as directed by EIC

Providing & Fixing of Battery operated Smart Controller for single station including all fittings, etc complete all as directed by EIC

Providing & Fixing of Battery operated Smart Controller 2 station including all fittings,etc complete all as directed by EIC

Providing & Fixing of Valve Boxes 12" Rectangular on brick base filled with gravel with openable top cover of Rainbird/TORO, including all labours,etc complete all as directed by EIC

Providing & Fixing of Valve Boxes 10" Round on brick base filled with gravel with openable top cover of Rainbird/TORO, including all labours, etc complete all as directed by EIC

Providing & Fixing of Valve Boxes 6" Round on brick base filled with Gavel with openable top cover of Rainbird/TORO, etc complete all as directed by EIC

Royalty Charges

Testing Charges - Water (PH Value, Sulphate & Chloride Content.)

Testing Charges - Cement (Standard Consistancy Fineness, Specific Gravity, Setting Time (Initial & Final), Compressive Strength, Soundness)

Testing Charges - Fine Aggregate (F.M., Silt content, Clay content)

Testing Charges - Fine Aggregate (Chloride & Sulphate Content.)

Testing Charges - Fine Aggregate (Silt Factor.)

Testing Charges - Course Aggregate (Sieve Analysis.)

Testing Charges - Course Aggregate (Water absorption, Specific gravity, Impact value / Crushing vaiue)

Testing Charges - Course Aggregate (Abrasion value)

Testing Charges - Course Aggregate (Flakiness Index & Elongation Index.)

Testing Charges - Course Aggregate (Soundness)

Testing Charges -Concrete (Mix design M20/M25/M30)

Testing Charges -Concrete (Compressive test of cube)

Testing Charges -Steel (Upto 16 mm (Set of 3 Bars) (Tensile strength, %, Elongation, Yield Stress,Weight-Per Meter, Bend / Rebend Test, Proof Stress.) )

Testing Charges -Steel (Above 16 mm (Set of 3 Bars) (Tensile strength, %, Elongation, Yield Stress,Weight-Per Meter, Bend / Rebend Test, Proof Stress.) )

Testing Charges -Steel (Nitrol Solution test (set of 3 bars))

Tensile strength, %, Elongation, Yield Stress,Weight-Per Meter, Bend / Rebend Test, Proof Stress.

Testing Charges -Concrete Blocks ( Density Test . (Set of 3 Blocks ),Compressive Strength. (Set of 8 Blocks ),Water Absorption Test.( Set of 3 Blocks ) )

Water Absorption (Set of 5 Bricks), Compressive Strength( Set of 5 Bricks), Efflorescence (Set of 5 Bricks).

Testing Charges -Stone / Rubble ( Crushing Value / Compressive Strength Water Absorption & Specific Gravity, )

Testing Charges - Flush shutter (Knife test, Adhesion test & End Immersion test)

Testing Charges - Wood (Density, Moisture content)

Testing Charges - Plywood (Determination of Resistance to dry heat, Moisture content, Density and Thickness of Plywood)

Testing Charges - Plywood (Glue Adhesion Test)

Testing Charges - Granite (Water absorption, Specific gravity)

Testing Charges - Tile (Water absorption, Modulus of Rupture) ( Set of 6 Tiles )

Testing Charges - Mortar (Compressive Strength (Set of 3 Cubes))

Testing Charges - Aluminium (Thickness, Mass per running meter)

Testing Charges - Aluminium (Test on anodised)

Testing Charges - G.I.Pipe (Weight per running meter, Diameter of pipe & wall thickness of pipe,)

Testing Charges - G.I.Pipe (Weight of Zinc coating per sq. m.)

Testing Charges - P.V.C. Pipes (non plastisized) (Weight per running meter, Diameter of pipe & wall thickness of pipe,)

Testing Charges - A.C. Pipes (Water Absorption)

Testing Charges - A.C. Pipes (Bursting Strength)

Penetration, Softening Point, Flash & Fire Point, Specific Gravity

Viscosity.

Ducility / Elastic Recovery

Extraction Test.( OGC)

Extraction & Sieve Analysis of Bituminous mix ( for BM/DBM/AC) (2 samples of extraction for one sieve analysis including extraction)

Marshall Stability & Flow measurement. ( Set of 3 moulds)

Job Mix Design with all Tests on aggregate (Excluding bitumen) for DBM/SDBC/AC.

Supplying & laying rigid steel conduit 16 SWG 25 mm. dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No: WG-MA/CC.

Supplying & laying rigid steel conduit 16 SWG 32 mm. dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No: WG-MA/CC.

Supplying & laying HMS PVC conduit 20 mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying & laying HMS PVC conduit 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying & erecting HMS P.V.C. conduit 32 mm. dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Providing & fixing junction box having size of 300x300mm & height of 80mm complete with Bakelite terminal strip of 16A/500V rating with cover having IP54 grade protection class includes dismantling of existing Junction box if any. This job includes dismantling of existing inspection/maintenance box if any.

Supplying and erecting UPVC reinforced flexible conduit 25 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete.

Supplying and erecting PVC box trunking of size 50x50 mm. with accessories on wall/ceiling as per specification No: WG-MA/BOX.

Supplying & erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying & erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying & erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying & erecting mains with 2x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying & erecting mains with 2x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying & erecting mains with 4x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying & erecting mains with 4x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying & erecting mains with 1x1.5 sq.mm FRLSH copper PVC insulated earth wire laid in provided conduit/trunking/ inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying & erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated earth wire laid in provided conduit/trunking/ inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying & erecting mains with 1x4 sq.mm FRLSH copper PVC insulated earth wire laid in provided conduit/trunking/ inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying & erecting mains with 1x6 sq.mm FRLSH copper PVC insulated earth wire laid in providedconduit/trunking/ inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type switch 16A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete.

Supplying & installing co-axial copper cable low voltage grade RG-11 as per specification No. WG-TW

Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type blanking plate one module, duly erected on provided plate & box.

Supplying and erecting ISI mark modular type blanking plate two module, duly erected on provided plate & box.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting ISI mark modular safety power strip with one modular switch 16A and three sockets each 13A combination with overload and surge protection unit on double mounting plate, duly erected complete.

Supplying and erecting modular pop up Box 8 module erected with provided AV/ HDMI , RJ 45,6 A electrical sockets and switch on provided table .

Supplying and erecting luminous / modular type call bell indicator with plastic body, heavy duty coil and indicator lamp working on 230V A.C. supply with resetting arrangement complete erected on double wooden/ sunmica board

Supplying & erecting original 1.25 mm CRCA sheet metal enclosures with 20A. 2 pin plug & earth socket and 20A. 3 pin plug top with 20A/30A single pole MCB complete erected on angle iron/ GI frame.

Supplying & erecting original 1.25 mm CRCA sheet metal enclosures with 30A, 3 pin plug & earth socket and 30 A 3 pin plug top with 30A triple pole MCB complete erected on angle iron/ GI frame.

Supplying and erecting ISI mark modular type 32A, DP key tag switch with KEY TAG, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting of high-performance, flexible mass-loaded vinyl noise barrier, offering superior acoustic transmission loss and Resistant to most chemicals, solvents and petrol,Free from lead, odour-producing oils and bitumen,Resistant to weather and UV light with barrier weight of 4kg/m2, 2/4mm thickness and material should be fire retardant inculding all fixing accessories to complete .

Point wiring for light/fan/bell concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW

Point wiring for lights more than 6mtr and upto 10mtr, as per note : 1

Point wiring for lights more than 6mtr and upto 16mtr, as per note : 1

Secondary point wiring for additional light/ bell point, concealed type in min 20 mm PVC conduit with 1.5 sq.mm. (2+1E) FR/FRLSH grade copper wires with required accessories as per specification No: WG-PW/CW

Secondary point wiring for additional light/ bell point in min 20 mm metal conduit with 1.5 sq.mm (2+1E) FR/FRLSH grade copper wire with required accessories as per specification No: WG-PW/SW

Point wiring for Staircase lights.

Supplying and fixing tool-less Information Outlet (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO

Supplying & installing UTP networking cat-6 cable suitable for LAN / WAN Computer net-working as per specification No. WG-COC/NC

Supplying & laying HMS PVC conduit 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying and fixing 1 meter length, UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC (User side and Switch side)

Supplying and erecting FR grade, pvc armoured multimode armoured multimode optical fibre cable with 6 fibres, with core dia 50/125 µm (OM3) suitable for 1 gbps ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification No. WG-COC/OFC LSZH (Required Indoor tight buffered cable not armored cable- From Hubroom to FF and SF)

Supplying, fixing, and configuring ethernet managed ethernet switch of 24 ports with 2 SFP + 2 combo port and web view/CLI on provided rack or as directed as per specification no. WG-NWC/GBS

Supplying, fixing, and configuring 10G base -SR SFP plus MM transceiver as per specification complete.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP

Supplying and fixing rack mounted type 12 Ports, light guide unloaded interconnect unit with adapter panel for termination of optical fibre cables on wall/ provided U rack complete as per specification no. WG-NAS/ LIU

Supplying and fixing rack type 24 ports, light guide interconnect unit with adapter panel for termination of optical fibre cables on wall/ provided U rack complete as per specification no. WG-NAS/ LIU

Supplying and fixing 1 x 6 duplex adapter panel - SC as per specification complete.

Supplying and fixing SC/LC type Multimode Pigtails (OM3) for LIU to terminate OFC in LIU as per specification No. WG-NAS/LIU2

Supplying & installing single mode fibre patch cord 3 m – duplex complete. (multimode required)

Supplying and erecting ISI mark modular type telephone socket two gang with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying & erecting telephone copper cable 4 pair with 0.5 mm dia. laid in provided PVC casing capping / conduit as per specification No. WG-TW

Supplying & erecting jelly filled unarmoured telephone copper cable 20 pair with 0.5 mm dia. laid in provided PVC casing capping / conduit as per specification No. WG-TW

Supplying & erecting jelly filled unarmoured telephone copper cable 50 pair with 0.5 mm dia. laid in provided PVC casing capping / conduit as per specification No. WG-TW

Supplying & erecting jelly filled unarmoured telephone cable 100 pair with 0.5 mm dia. laid in provided PVC casing capping/ conduit as per specification No. WG-TW

Supplying, erecting & commissioning MDF Box 60 x 60 pairs as per specification No. WG-TW

Supplying, erecting & commissioning MDF Box 500 x 500 pairs as per specification No. WG-TW

Supplying, erecting & commissioning 10 pair module for connection & disconnection of telephone cable as per specification No. WG-TW

Supplying and erecting broadband splitter unit with 1 input & 2 output RJ 11 female connectors complete.

Supplying & erecting copper jumper wire with 0.5 mm dia as per specification No. WG-TW

Supplying LED concealed type foot / step light with aluminium body for indoor/outdoor application suitable for upto 4W-6W LED including driver and erecting by making necessary arrangement/recess in wall to make it flush with surface.

Supplying and erecting corridor/passage light fitting (2 feet) including 9W LED lamp, comprises of extruded channel in plastic silver grey colour & with same plastic end cap on provided PVC block / wooden board.

Supplying and erecting decorative oval bulk head edge-lit 10W LED luminaire comprising of high brightness LED Fitting on provided PVC block / wooden board. With IP65

Supplying & erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete. Batten type

Supplying and erecting LED Mirror Light with integrated driver including 7W to 9W lamp with polycarbonate housing and opal diffuser to be fixed above mirror or as required on clamps complete.

Supplying and erecting White Footlight with 4 modules concealed modular box and LED lights with cover complete erected on wall /flush to wall with necessary chiselling in wall and finishing with cement and mortar / POP as per required and duly connected.

Supply, installation, testing and commisioning of 48W , 8ft Suspended linear UP(30%) - down (70%) LED slim luminaire with DALI dimmable ballast with powder coated cement grey finish extruded aluminium housing, high efficiency special transulent satin finish colour LED PMMA diffuser for uniform light distribution. Electronic driver duly wired upto terminal block, Luminaire lumen>120lm, CRI>80,Colour temperature-4000-5700K, IP20, Driver efficiency>85%, THD<10%, Powerfactor>0.95, Surge protection in CM-3KV, Multistage Isolated Constant Current-Constant Voltage operated driver with range 150-270V AC and including all suspension accessories like rigid rod suspension unit of length 1.2/1.5 meters length consisting of ceiling fixing brackets, fixing clamps, plastic ceiling trimming clamp.1.2/1.5 meters length 5C x 1.5 sqmm flexible transperent/ white cable for power connection and groumet for cable entry with locknuts for locking arrangement. ( For Classrooms)

Supply, installation, testing and commisioning of 24W , 4ft Suspended linear UP(30%) - down (70%) LED slim luminaire with DALI dimmable ballast with white powder coated finish extruded aluminium housing, high efficiency special transulent satin finish colour LED PMMA diffuser for uniform light distribution. Electronic driver duly wired upto terminal block, Luminaire lumen>120lm,CRI>80, LED Make: Nichia/Cree/Osram/Lumiled, Colour temperature-4000-5700K, IP20, Driver efficiency>85%, THD<10%, Powerfactor>0.95, Surge protection in CM-3KV, Multistage Isolated Constant Current-Constant Voltage operated driver with range 150-270V AC and inculding all suspension accessories like Wire/rod suspension unit of length 1.2/1.5 meters length consisting of ceiling fixing brackets, fixing clamps, plastic ceiling trimming clamp.1.2/1.5 meters length 5C x 1.5 sqmm flexible transperent/ white cable for power connection and groumet for cable entry with locknuts for locking arrangement.

Supply, installation, testing and commisioning of 24W , 4ft Suspended linear UP(30%) - down (70%) LED slim luminaire without dimmable ballast with powder coated cement grey finish extruded aluminium housing, high efficiency special transulent satin finish colour LED PMMA diffuser for uniform light distribution. Electronic driver duly wired upto terminal block, Luminaire lumen>120lm,CRI>80, Colour temperature-4000-5700K, IP20, Driver efficiency>85%, THD<10%, Powerfactor>0.95, Surge protection in CM-3KV, Multistage Isolated Constant Current-Constant Voltage operated driver with range 150-270V AC and inculding all suspension accessories like Wire/rod suspension unit of length 1.2/1.5 meters length consisting of ceiling fixing brackets, fixing clamps, plastic ceiling trimming clamp.1.2/1.5 meters length 5C x 1.5 sqmm flexible transperent/ white cable for power connection and groumet for cable entry with locknuts for locking arrangement.

Supply, installation, testing and commisioning of 20W LED track light with 40deg beam angle and housing made up of cement grey finish powder coated, die cast aluminium for effective thermal management, with high efficiency reflector optics. Electronic driver duly wired upto terminal block, Luminaire lumen>120lm, CRI>80, color temperature-4000-5700K, IP20, Driver efficiency>86%, THD<10%, Powerfactor>0.95, Surge protection in CM-3.0KV, Multistage Isolated Constant Current Operated driver with range 150-270V AC inculding all required necessary accessories.NOTE: Track will be additional Item

Supply, installation, testing and commisioning of 15W Slim panel Surface mounted LED downlighter with housing made up of die cast aluminium for better heat management. Hight Transmittivity Diffuser for better light output and uniform light distribution without glare. Driver and accessories are pre wired for easy installation and long service. CRI>70, LED efficacy >120lm/W, Color temperature 4000-5700K, IP20, Ambient temp-0 to 45DegC, Driver efficiency>85%, THD<10%, Powerfactor>0.95, Surge protection 3KV, Multistage Isolated Constant Current- Constant Voltage operated driver with range 150-270V AC inculding all necessary mounting accessories. ( For Corridors)

Supply, installation, testing and commisioning of 15W Slim panel Recess mounted LED downlighter with housing made up of die cast aluminium for better heat management. Hight Transmittivity Diffuser for better light output and uniform light distribution without glare. Driver and accessories are pre wired for easy installation and long service. CRI>70, LED efficacy >120lm/W, LED , Color temperature 5700K, IP20, Ambient temp-0 to 45DegC, Driver efficiency>85%, THD<10%, Powerfactor>0.95, Surge protection 3KV, Multistage Isolated Constant Current- Constant Voltage operated driver with range 150-270V AC inculding all necessary mounting accessories. ( For Corridors)

Supply, installation, testing and commisioning of 18W Slim panel Surface mounted LED downlighter with housing made up of die cast aluminium for better heat management. Hight Transmittivity Diffuser for better light output and uniform light distribution without glare. Driver and accessories are pre wired for easy installation and long service. CRI>70, LED efficacy >120lm/W, LED , Color temperature 5700K, IP20, Ambient temp-0 to 45DegC, Driver efficiency>85%, THD<10%, Powerfactor>0.95, Surge protection 3KV, Multistage Isolated Constant Current- Constant Voltage operated driver with range 150-270V AC inculding all necessary mounting accessories.( For Staircases)

Supply, installation, testing and commisioning of 12W Slim panel Surface mounted LED downlighter with housing made up of die cast aluminium for better heat management. Hight Transmittivity Diffuser for better light output and uniform light distribution without glare. Driver and accessories are pre wired for easy installation and long service. CRI>70, LED efficacy >120lm/W, LED , Color temperature 5700K, IP20, Ambient temp-0 to 45DegC, Driver efficiency>85%, THD<10%, Powerfactor>0.95, Surge protection 3KV, Multistage Isolated Constant Current- Constant Voltage operated driver with range 150-270V AC inculding all necessary mounting accessories. ( For Toilets)

Supply, installation, testing and commisioning of 12W Recess mounted LED downlighter with housing made up of die cast aluminium for better heat management. Hight Transmittivity Diffuser for better light output and uniform light distribution without glare. Driver and accessories are pre wired for easy installation and long service. CRI>70, LED efficacy >120lm/W, LED , Color temperature 4000-5700K, IP20, Ambient temp-0 to 45DegC, Driver efficiency>85%, THD<10%, Powerfactor>0.95, Surge protection 3KV, Multistage Isolated Constant Current- Constant Voltage operated driver with range 150-270V AC inculding all necessary mounting accessories.

Supply, installation, testing and commisioning of 40W, 1ft x 4ft Recess mounted luminaire with DALI dimmable ballast CRCA powder coated housing with top cover for better aesthetic finish, HET diffuser for better light transmission and immaculate effect, electronic driver duly wired upto terminal block, LED Efficacy>120lm/W CRI>80, LED , Colour temperature-4000-5700K, IP20, driver Efficiency>86%, THD<10%, Powerfactor>0.95, Surge protection in CM-3KV, Multistage isolated Constant current-Constant voltage operated driver with range 150-270V AC inculding all necessary mounting accessories. ( For conference Rooms)

Supply, installation, testing and commisioning of 40W, 1ft x 4ft Recess mounted luminaire with non dimmable ballast CRCA powder coated housing with top cover for better aesthetic finish, HET diffuser for better light transmission and immaculate effect, electronic driver duly wired upto terminal block, LED Efficacy>120lm/W CRI>80, LED , Colour temperature-4000-5700K, IP20, driver Efficiency>86%, THD<10%, Powerfactor>0.95, Surge protection in CM-3KV, Multistage isolated Constant current-Constant voltage operated driver with range 150-270V AC inculding all necessary mounting accessories. ( For conference Rooms)

Supply, installation, testing and commisioning of 30W LED Flood luminaire with Aluminium pressure Die cast housing parts for long life, Polycarbonate diffuser for superior performance, Toughened glass with silicon gaskets for IP66 protection, Complete assembly with LED, Driver and accessories pre- wired up to terminal block. LED Efficacy>150lm/W , CRI >70,Temperature range- 0 to 40DegC, Driver efficiency>85%, Power factor>0.95, THD<10%, Colour Temperature-4000- 5700K, Surge protection 4KV, Multistage Isolated Constant Current Operated driver with range 150-270V AC and Safety Extra Low Voltage inculding all necessary mounting accessories.( For terrace)

Supply, installation, testing and commisioning of 39W suspended linear fixture with acrylic cover(IP-65) and energy efficient driver, lightweight design in high quality extruded Sabic LUX grade optics and powder coated CRCA steel housing, extruded Opal polycarbonate diffuser with energy efficient LED driver duly wired up to terminal block.Luminaire lumen ≥ 120, CRI>80, LED Efficacy ≥ 170lm/W, color temperature-4000-5700K, IP65, Driver efficiency>85%, THD<10%, Powerfactor>0.95, Surge protection in CM-3.0KV, Multistage Isolated Constant Current-Constant Voltage Operated driver with range 150-270V AC with required necessary accessories

Supply, installation, testing and commisioning of 30W, Surface mounted luminaire with CRCA powder coated housing with top cover for better aesthetic finish, electronic driver duly wired upto terminal block, LED Efficacy>120lm/W CRI>80,, Colour temperature-4000-5700K, IP20, driver Efficiency>86%, THD<10%, Powerfactor>0.95, Surge protection in CM-3KV, Multistage isolated Constant current-Constant voltage operated driver with range 150-270V AC inculding all necessary mounting accessories.( For Double Height)

Supply, installation, testing and commisioning of 30W , Circular pendent luminaire dia 450-500mm with wooden coated finish extruded aluminium housing, high efficiency special transulent satin finish colour LED PMMA diffuser for uniform light distribution. Electronic driver duly wired upto terminal block, Luminaire lumen>120lm,CRI>80, , Colour temperature-4000-5700K, IP20, Driver efficiency>85%, THD<10%, Powerfactor>0.95, Surge protection in CM-3KV, Multistage Isolated Constant Current-Constant Voltage operated driver with range 150-270V AC and inculding all suspension accessories like rod suspension unit of length 1.2/1.5 meters length consisting of ceiling fixing brackets, fixing clamps, plastic ceiling trimming clamp, cable entry with locknuts for locking arrangement.

Supply, installation, testing and commisioning of 18W , Circular pendent luminaire with extruded aluminium housing, high efficiency special transulent satin finish colour LED PMMA diffuser for uniform light distribution. Electronic driver duly wired upto terminal block, Luminaire lumen>120lm,CRI>80,, Colour temperature-5700K, IP20, Driver efficiency>85%, THD<10%, Powerfactor>0.95, Surge protection in CM-3KV, Multistage Isolated Constant Current-Constant Voltage operated driver with range 150-270V AC and inculding all suspension accessories like rod suspension unit of length 1.2/1.5 meters length consisting of ceiling fixing brackets, fixing clamps, plastic ceiling trimming clamp, cable entry with locknuts for locking arrangement.

Supply, installation, testing and commisioning of 24W High efficient LED surface/wall mounted Specially designed Extruded powder coated aluminium housing, High optically efficient polycarbonate difuser. in-built electronic driver duly wired up to terminal block. Luminaire lumen ≥ 120lm, LED Make:Nichia/ Cree/Everlite/Edison/Osram/Lumiled, IP20, CRI>80,Temperature range- 0 to 45DegC, Driver efficiency>85%, Power factor>0.9, THD<20%, Colour Temperature- 4000-5700K, Surge protection 2.5KV, Multistage Isolated Constant Current Operated driver with range 150-270V AC with required necessary mounting accessories.

Supply, installation, testing and commisioning of 2ft, 10W High efficient LED surface/wall mounted Adjustable type Specially designed Extruded powder coated aluminium housing, High optically efficient polycarbonate difuser. in-built electronic driver duly wired up to terminal block. Luminaire lumen ≥ 120lm, , IP20, CRI>80,Temperature range- 0 to 45DegC, Driver efficiency>85%, Power factor>0.9, THD<20%, Colour Temperature- 4000-5700K, Surge protection 2.5KV, Multistage Isolated Constant Current Operated driver with range 150-270V AC with required necessary mounting accessories.

Supply, installation, testing and commisioning of 44W Decorative Chandelier fixtures, Glass material with required necessary suspension accessories.

Supply, installation, testing and commisioning of 36W Decorative fixtures ,with required necessary mounting accessories.

Supply, installation, testing and commisioning of 24W wall mounted Decorative fixtures with required necessary mounting accessories.

Supplying and erecting Decorative reading table mounted with adjustable light fitting including 10W LED , with inculding all necessary mounting accessories to complete the job.

Supplying and erecting 10W underwater led light with IP66 protection for the water bodies with inculding all necessary mounting accessories to complete the job.

Supply, installation, testing and commisioning of 18W Surface mounted LED downlighter with housing made up of die cast aluminium for better heat management. Hight Transmittivity Diffuser for better light output and uniform light distribution without glare. DALI DIMMABLE Driver and accessories are pre wired for easy installation and long service. CRI>70, LED efficacy >120lm/W, LED , Color temperature 4000-5700K, IP20, Ambient temp-0 to 45DegC, Driver efficiency>85%, THD<10%, Powerfactor>0.95, Surge protection 3KV, Multistage Isolated Constant Current- Constant Voltage operated driver with range 150-270V AC inculding all necessary mounting accessories. ( For Library areas)

Supply, installation, testing and commisioning of 2 x 10W LED recessed spot light with 45deg wide beam angle with glareless lens and housing made up die cast aluminium for effective thermal management, with high efficiency reflector optics. Electronic driver duly wired upto terminal block, Luminaire lumen>120lm, CRI>80,, color temperature-4000-5700K, IP20, Driver efficiency>86%, THD<10%, Powerfactor>0.95, Surge protection in CM-3.0KV, inculding all required necessary accessories.

Supply, installation, testing and commisioning of 30W, Recess mounted luminaire with CRCA powder coated housing with top cover for better aesthetic finish, electronic driver duly wired upto terminal block, LED Efficacy>120lm/W CRI>80, , Colour temperature-4000-5700K, IP20, driver Efficiency>86%, THD<10%, Powerfactor>0.95, Surge protection in CM-3KV, Multistage isolated Constant current-Constant voltage operated driver with range 150-270V AC inculding all necessary mounting accessories.( For Double Height)

Supply, installation, testing and commisioning of 60W surface mounted medium high bay LED with Aluminium pressure Die cast housing parts for long life, Toughened glass with silicon gaskets for IP66 protection, Complete assembly with LED, Driver and accessories pre- wired up to terminal block.LED Efficacy>150lm/W , CRI >70,Temperature range- 0 to 40DegC, Driver efficiency>85%, Power factor>0.95, THD<10%, Colour Temperature- 4000-5700K, Surge protection 4KV, Multistage Isolated Constant Current Operated driver with range 150-270V AC and Safety Extra Low Voltage inculding all necessary mounting accessories.( For Triple height Areas)

Supply, installation, testing and commisioning of 100W LED Flood luminaire with Aluminium pressure Die cast housing parts for long life, Polycarbonate diffuser for superior performance, Toughened glass with silicon gaskets for IP66 protection, Complete assembly with LED, Driver and accessories pre- wired up to terminal block. LED Efficacy>150lm/W , CRI >70,Temperature range- 0 to 40DegC, Driver efficiency>85%, Power factor>0.95, THD<10%, Colour Temperature- 4000-5700K, Surge protection 4KV, Multistage Isolated Constant Current Operated driver with range 150-270V AC and Safety Extra Low Voltage inculding all necessary mounting accessories.( For terrace)

Supplying & erecting aviation obstruction light consisting of yellow painted die-cast aluminium alloy housing with integral LED aviation light comprising of aluminium housing with polycarbonate enclosure complete.

Supply, installation, testing and commisioning of Energy efficent, five star rating (28-35Watts, Power factor-0.99), 1200mm sweep BLDC ceiling fan complete with all accessories including doen condutor & wiring the down rods of standard length (upto 1200 mm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required ( But without regulator )

Supply & Installation of Wall Washer Light, 50-60W, Power Module LED 4000k, IP66 It's made of high pressure die-casting aluminium with electrostatic plastic coating for surface. It resist the impact & friction.Painted with polyester powder coating in Standard Grey Colour. IP Rating - IP 66. Length-1000mm,Width- 104mm, Height-125mm Weight - 4Kgs.,Power LED's Module with LED efficacy >100lm/W Individual LED on Printed Circuit Board with metal core plate.Electronic Power Supply for LED Module,which offers Protection against Short Circuit, Over- Voltage & Over-Current, with in-built surge protection. Multiple Beam angles options avilable to serve the different lighting needs.

Supply & Installation of 20-25W Power Module LED, 4000k, IP66 Light NPL-3-9-Projetcor Light: It's made of high pressure die-casting aluminium with electrostatic plastic coating for surface. It resist the impact & friction.Painted with polyester powder coating in Standard Grey Colour. IP Rating - IP 66. Height – 176mm, Dia.170mm, Weight - 1.9Kgs., Power LED's Module with high efficacy Individual LED on Printed Circuit Board with metal core plate. LED efficacy >100lm/W ,CRI > 80,voltage input AC100-277V. In-Built Electronic Power Supply for LED Module,which offers Protection against Short Circuit, Over- Voltage & Over- Current, with in-built surge protection. Multiple Beam angles options avilable to serve the different lighting needs.

Supply, installation, testing and commisioning of Pre-assembled processor with two configurable links which would connect with Din rail mounted dimming modules. The processor with capacity of storing, generating, evalutaing & control of complete Lighting controls with GUI software (considered as separate line item. Panel accepts one 120V-240V, 1 phase, 2 wire, 20A feed, (20A-1P over-current protection, per circuit, by others.) Dimensions should be around less than 35 X 25 X10 (cm).

Supply, installation, testing and commisioning of GUI software , web-based software license which would help control, programming, change, monitor lighting control system via any desktop (server based)e connected to the corporate or standalone central network.

Supply of BACNET liscence for BMS integration. The Bacnet should be BTL certified for seamless integration.

Supply, installation, testing and commisioning of Din rail power supply module to convert 230V to LV for devices such as keypads , antenna etc.

Supply, installation, testing and commisioning of Wire Landing Board, wire landing board is a wiring aid consisting of a printed circuit board with one set of five terminal blocks. The wirelanding baord can be din rail or panel surface mounted.

Supply, installation, testing and commisioning of Wireless Daylight sesnor - Ceiling mount, with preferabley non open frequency, for caliberation based (open and closed loop daylight harvesting), battery-powered with 7-8 years of battery life, white.

Supply, installation, testing and commisioning of Wireless occupancy sensor wall mounted with 90 deg view with minor motion detection capability with sqaure coverage of approx. 300 sqft.

Supply, installation, testing and commisioning of Wireless occupancy sensor Ceiling mounted with 360 deg view with minor motion detection capability with sqaure coverage of approx. 300 sqft.

Supply, installation, testing and commisioning of Receiver antenna for all wireless devices with low frequency (for high amplitude travel), indvidual adress based (non zigbee type) , no wired connections to sensors & field devices , Ceiling Mount,.

Supply, installation, testing and commisioning of Wirelss keyapd with 6 button with raise and lower, with battery powerd, face plate low frequency etc. capable of instaling on any surface.

Supply, installation, testing and commisioning of Wireless occupancy sensor wall mounted with 180 deg view with minor motion detection capability with sqaure coverage of approx. 300 sqft.

Supply, installation, testing and commisioning of Wired keypad with see and touch (Engraving) 5/8 button with raise/lower wallstation. Two contact closure inputs via a connector on the back of the wallstation. Unit dimensions with faceplate: (87 mm x 87 mm). Mounts in European and UK wallboxes.

Supply, installation, testing and commisioning of DALI module with 2 independent DALI links with up to 64 DALI ballasts per link and 16 groups per link. 4 groups of sensors inputs: Occ sensor, daylight sensor and IR sensor.Din rail mounted .

Supply & installation of 4C x 1.5 Sq.mm Sheilded cable for the keypad , QSM & Dali modules integration with necessary required accessories

Supplying & erecting mains with 2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supply, installation, testing and commisioning of Wall mount occupancy sensor switch combines a switch with a passive infrared or vacancy sensor (180' sensor field of view) upto 30ft x 30ft major motion coverage and 20ft x 20ft minor motion coverage. The sensor detects the heat from occupants moving within an area to determine whether the space is occupied. Based on the feedback from the sensor, the occupancy sensing switch will adjust the load - DUAL CKT accordingly.

Supplying & erecting CRCA sheet metal one way enclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI frame complete.

Supply, installation, testing and commisioning of STAND ALONE Wireless Occupancy/Vacancy Sensor for WASHROOMS rooms with low frequency Ceiling mount, approx. coverage of 300-350, Battery-powered,white. Simialr to Lutron LRF5 OCR2B P WH with relay module.

Supplying & laying HMS PVC conduit 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supply of following ratings UPS system, IGBT based suitable for A/C input voltage 415 Volts +/-15%, 50HZ and out put voltage as below. The UPS shall be housed in floor mounted modular enclosure made 3.7 Online Uninterruptible Power Supply (UPS) (AP-UPS)out of MS sheet of suitable thickness aesthetically finished, duly pretreated, powder coated with battery bank and sheet steel rack made out of minimum 14SWG sheet steel for batteries. The battery bank shall be of suitable capacity for independent, thirty minute back up time complete with interconnection wiring between the Inverter/UPS and the Battery and with the following specifications. Specifications:- a) Type : ON-line b). Capacity : As per item below 1). OUTPUT:- a). Line Voltage : 415 Volts b). Voltage range : +/- 5 % c). Frequency : 50 Hz +/-2% d). Phase : Three Phase with Neutral 2). RECTIFIER:- a). Floating Voltage: 240 Volts DC ( Minimum ) or above b). Boost Voltage: suitable for 240 Volts 3). INVERTER/UPS:- a). Load Power Factor: 0.8 lag to unity b). Output Voltage : 230 Volts AC c). Output Voltage Regulation: +/ 2 % d). Output frequency: 50 Hz e). Nature of cooling: Forced Air f) Efficiency should be >95% at 20% Load 4). PROTECTION:- a). Battery low tripping b). Inverter/UPS over load 5). INDICATOR:- a). Main ON b). Inverter /UPS ON c) Battery Low d). Inverter/UPS Overload 6). ALARM WITH INDICATION:- a). Low Battery b). Over Load Complete as above and capacities as below Complete as above and capacities as below A)125 kVA Modulur Frame size with 2Nos. Of 25kW modules at present with 15mins battery backup.

B)125 kVA Modulur Frame size with 3Nos. Of 25kW modules at present with 15mins battery backup and 2nos. Of 25kW modules for future.

CONVENTIONAL UPS Supplying & erecting on line UPS pure sine wave of 2 kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins battery backup, as per specification no. AP-UPS

Supplying & erecting on line UPS pure sine wave of 3 kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins battery backup, as per specification no. AP-UPS

Supplying & erecting on line UPS pure sine wave of 6 kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins battery backup, as per specification no. AP-UPS

Supplying and erecting 12 V/17Ah -18Ah SMF battery with battery terminal wire, duly charged complete with 24 months warranty complete

Supplying and erecting 12 V/65Ah SMF battery with battery terminal wire, duly charged complete with 24 months warranty complete

Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking DPMCB 6A to 32A, C- series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking DPMCB 40A to 63A, C- series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking TPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB

Supplying erecting and marking four pole isolators only switch version of miniature circuit breakers of 40A in provided distribution board complete.

Providing & erecting 3 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu ),adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 12 ways, on iron /GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 24 ways, on iron/ GI frame/wooden board.(horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 12 ways/phase (36 poles) on iron/ GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SP / TP MCBs of 36 ways on iron/ GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB

Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 ways for incoming and 6 ways for outgoing SP MCB’s on iron/ GI frame as per specification no. SW-SWR/MCBDB

Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 ways for incoming and 10 ways for outgoing SP MCB’s on iron/ GI frame as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted suitable for 3 pole MCCB as incomer & outgoing SP MCB (12 poles) or TP MCB of 4 ways (12 poles) on iron/ GI frame. (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted suitable for 3 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles) , on iron/ GI frame. (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 ways for incoming and 14 ways for outgoing SP MCB’s on iron/ GI frame inculding necessary fixing accessories

Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 16/ 25A complete as per specification no. SW-RCCB/RCCB

Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 40A complete as per specification no. SW-RCCB/RCCB

Providing, erecting and commissioning of pop over voltage release for RCCB inside DB's for over voltage protection inculding all necessary fixing accessories.

Supplying, installation & marking of surge arrestor/ surge protection device at the sub main distribution board after the incoming breaker of type 2 tested for Imax 15 kA for single phase and neutral as per specification no. CP-SPD

Supplying, installation & marking of surge arrestor/ surge protection device at the sub main distribution board after the incoming breaker of type 2 tested for Imax 15 kA for three phase and neutral as per specification no. CP-SPD

Supplying and erecting two pole power contactor 230 V, 32 A for time switch complete erected on provided wooden block/ box, with necessary materials.

Supplying and erecting programmable digital almanac timer microcontroller based with real time clock to operate on derived switching “ON” & switching “OFF” street light as per daily sunset and sunrise respectively automatically having 4 digit LED continuous time display, relay output 230 V / 10A with 10 hrs battery backup and manual over drive facility capable to drive different capacity contactors timer erected in provided M.S. box in an approved manner.

DB Frames: Supplying and erecting metal work in CRCA sheet with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.

Supplying and installation of Dinrail mounted 3-phase Inbuilt CT multi function meter for VTPN DB with display and communication port with all necessary accessories. 1-Phase MFM upto 100A

3-Phase MFM upto 65A

3-Phase MFM upto 65A to 125A

Supply, unloading, storing, shifting to required location, Installation, Testing and Commissioning of compartment type indoor / external LT Panels suitable for 415V, 3 phase, 4 wire, 50Hz, AC Supply system suitable size fabricated in compartmentalised design from CRCA sheet steel of 1.6mm thickness for body, 2mm thickness for frame work and covers, 3mm thickness for gland plates with stiffers where ever thickness required and shall be dust and vermin proof construction. The panel must be vibration free structure which is chemically treated with seven tank process before painting for surface treatment and powder coated with two coats of zinc chromate primer and two coats of paint of approved shade. Fire and Corrosion resistant coating simclientar to VIPER FR 1101 applied in two coats with necessary primer. The panel must be have suitable capacity extensible type TPN copper / Aluminium bus bars, fire retardent DMC / SMC fittings for openings around bus bar near the sectional barriers. Any panel exceeding 1.5 m shall be made in parts(sections) not exceeding 1.5 m. The panel must be rated for withstanding capacity of 65kA for one second, bottom base channel of MS section not less than 100mm x 50mm x5mm thick, common earth bar of size 50mm x 5mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of bus bars and control wiring with 2.5 sq.mm PVC insulated copper conductor (FRLS) cable, cable alleys, cable gland plates in two half, i/c providing following switch gears etc conforming to technical specification and as required: Refer list of recommended materials for the approved makes of breakers,relays,meters,starters,SPD, indicating lamps,etc (All the Incommer MCCB, ACBs shall be compatable to be integerated with BMS and shall be provided with Remote operation, Modbus/RS 485 protocol and shall be able to remotely read and set the parameters for protection functions. Consult history fclientes, maintenance indicators and control & monitoring the breakers. The ACB shall be provided with making current release for self protection of the breaker in case of closing on fault current also shall have reverse power and phase sequence protection including wiring for interconnections complete as required.) ACADEMIC BLOCK LT PANELS ACADEMIC B.COM BLOCK MAIN LT PANEL( INDOOR TYPE) For Details REfer Technical Specification and Tender Booklets

ACADEMIC B.A BLOCK MAIN LT PANEL ( INDOOR TYPE) for Details Refer Technical Specification and Tender Booklet

TYPICAL FLOOR PANEL FOR B.COM 1ST & 2ND FLOORS & BA -1ST FLOOR ( INDOOR TYPE) for Details Refer Technical Specification and Tender Booklet

TYPICAL PANEL FOR B.COM & BA FOR 30SEATER SIDE ( INDOOR TYPE) for Details Refer Technical Specification and Tender Booklet

ACADEMIC MAIN UPS O/P PANEL ( INDOOR TYPE) for Details Refer Technical Specification and Tender Booklet

ACADEMIC LOWER GROUND FLOOR PANEL (INDOOR TYPE) for Details Refer Technical Specification and Tender Booklet

TYPICAL LIFT DB ( INDOOR TYPE) for Details Refer Technical Specification and Tender Booklet

TERRACE HVAC PANEL - 1 ( OUTDOOR TYPE) for Details Refer Technical Specification and Tender Booklet

TERRACE HVAC PANEL - 2 ( OUTDOOR TYPE) for Details Refer Technical Specification and Tender Booklet

LGF AHU PANEL ( INDOOR TYPE) for Details Refer Technical Specification and Tender Booklet

TYPICAL AHU PANEL - Type - C ( INDOOR TYPE) Incomer 20A, 10kA,TPN MCB 'C' Curve-1No , Indication lamps for R, Y , B Phases & ON/OFF/TRIP Status,Fire Integration with PT : 230v/24v,with 4Nos Auxillary contacts

ADMINSTRATION BLOCK LT PANELSADMIN BLOCK MAIN LT PANEL ( INDOOR TYPE) for Details Refer Technical Specification and Tender Booklet

ADMIN BLOCK WING-C MAIN LT PANEL (INDOOR TYPE) for Details Refer Technical Specification and Tender Bookle

WING-A FLOOR PANEL ( INDOOR TYPE) for Details Refer Technical Specification and Tender Bookle

ADMIN LOWER GROUND FLOOR PANEL (INDOOR TYPE) for Details Refer Technical Specification and Tender Bookle

ADMIN MAIN UPS O/P PANEL ( INDOOR TYPE) for Details Refer Technical Specification and Tender Bookle

TYPICAL LIFT DB ( INDOOR TYPE) for Details Refer Technical Specification and Tender Booklet

TERRACE HVAC PANEL ( OUTDOOR TYPE) for Details Refer Technical Specification and Tender Booklet

BUILDING EMERGENCY PANEL ( OUTDOOR TYPE) for Details Refer Technical Specification and Tender Booklet

HVAC PANEL ( INDOOR TYPE) for Details Refer Technical Specification and Tender Booklet

LGF AHU PANEL - 1,2 ( INDOOR TYPE) for Details Refer Technical Specification and Tender Booklet

CSU STARTER PANEL ( INDOOR TYPE) for Details Refer Technical Specification and Tender Bookle

GROUND FLOOR AHU PANEL -1 ( INDOOR TYPE) Incomer ,20A, 10kA,TP MCB 'C' Curve-1no, with 4Nos Auxillary contacts, Indication lamps for R, Y , B Phases & ON/OFF/TRIP Status ,Fire Integration with PT : 230v/24v

GROUND FLOOR AHU PANEL -2 ( INDOOR TYPE) Incomer,25A, 10kA,TP MCB 'C' Curve - 1no, with 4Nos Auxillary contacts, Indication lamps for R, Y , B Phases & ON/OFF/TRIP Status ,Fire Integration with PT : 230v/24v,16A, 10kA,TP MCB 'C' Curve - 2Nos

1ST FLOOR AHU PANEL ( INDOOR TYPE) ,Incomer,40A, 10kA,TPN MCB 'C' Curve - 1no, with 4Nos Auxillary contacts, Indication lamps for R, Y , B Phases & ON/OFF/TRIP Status for Dteatiles Refer Technical specification and Tender Booklet

2ND FLOOR AHU PANEL ( INDOOR TYPE) for Dteiled refer Technical Specification and Tender booklet

RESIDENCES LIFT PANELS TYPICAL LIFT DB ( INDOOR TYPE) For Detailes Refer Technical Specification and tender Booklet

HOSTEL BLOCK LT PANELSHOSTEL BLOCK MAIN LT PANEL ( INDOOR TYPE) For Detailes Refer Technical specification and Tender Booklet

TYPICAL LIFT DB ( INDOOR TYPE) for Details Refer Technical Specification and Tender Booklet

BUILDING EMERGENCY PANEL ( OUTDOOR TYPE) For Detailes Refer Technical specification and Tender Booklet

CSU STARTER PANEL ( INDOOR TYPE) For Detailes Refer Technical specification and Tender Booklet

DINING BLOCK LT PANELS DINING BLOCK GROUND FLOOR LT PANEL ( INDOOR TYPE) For Details Refer Technical Specification and Tender Bokklet

TYPICAL LIFT DB ( INDOOR TYPE) for Details Refer Technical Specification and Tender Booklet

BUILDING EMERGENCY PANEL ( OUTDOOR TYPE) For Detailes Refer Technical specification and Tender Booklet

LIBRARY BLOCK LT PANELS MAIN LT PANEL ( INDOOR TYPE) For Details Refer Technical Specification and Tender Bokklet

THIRD FLOOR PANEL ( INDOOR TYPE) For Details Refer Technical Specification and Tender Bokklet

4TH & 5TH FLOOR PANEL ( INDOOR TYPE) For Details Refer Technical Specification and Tender Bokklet

MAIN UPS O/P PANEL ( INDOOR TYPE) For Details Refer Technical Specification and Tender Bokklet

TYPICAL LIFT DB ( INDOOR TYPE) for Details Refer Technical Specification and Tender Booklet

TERRACE HVAC PANEL ( OUTDOOR TYPE) For Details Refer Technical Specification and Tender Bokklet

BUILDING EMERGENCY PANEL ( OUTDOOR TYPE) For Details Refer Technical Specification and Tender Bokklet

AHU PANEL ( INDOOR TYPE) For Details Refer Technical Specification and Tender Bokklet

CSU STARTER PANEL ( INDOOR TYPE) For Details Refer Technical Specification and Tender Bokklet

BLOCK-V 1 BHK HOUSING MAIN LT PANEL ( INDOOR TYPE) For Details Refer Technical Specification and Tender Bokklet

TYPICAL LIFT DB ( INDOOR TYPE) For Details Refer Technical Specification and Tender Bokklet

BUILDING EMERGENCY PANEL ( OUTDOOR TYPE) For Details Refer Technical Specification and Tender Bokklet

Supplying, erecting & terminating XLPE armoured cable 3½ core 35 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½ core 50 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½ core 70 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½ core 95 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½ core 120 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½ core 150 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 1100 V. 3½ core 185 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½core 240 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½ core 300 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½core 400 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XPLE armoured cable 4 core 16 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 4 core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE unarmoured cable 1 core 25 sq. mm. copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE unarmoured cable 1 core 120 sq. mm. copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armoured cable 3 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armoured cable 3 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armoured cable 3 core 10 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armoured cable 4 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armoured cable 4 core 16 sq. mm. copper conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armoured cable 4 core 25 sq. mm. copper conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying and erecting flat flexible 3 core 4 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Providing & erecting Hot dipped galvanized ladder type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 100 mm height comprising all required standard accessories.

Providing & erecting Hot dipped galvanized ladder type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 300 mm width & 100 mm height comprising all required standard accessories.

Providing & erecting Hot dipped galvanized ladder type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 500 mm width & 100 mm height comprising all required standard accessories.

Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.

Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.

Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary hardware in approved manner.

Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 300 mm width & 20 mm height complete with necessary hardware in approved manner.

Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 500 mm width & 20 mm height complete with necessary hardware in approved manner.

Supply and installing following size of in the floor GI (hot dip galvanized) raceways made out of 1.6 mm thick GI sheet steel, with internal compartments complete with jointing sleeves and other accessories under floor/Ceiling installation including cutting and chasing the floor, making good the same, placing in position and cleaning from inside complete of following sizes etc. as required. (a) 100 mm wide x 38 mm deep raceway (1 compartment)

(b) 150 mm wide x 38 mm deep raceway (1 compartment)

Providing and fixing 150 x 150 x 65 mm deep GI (hot dip galvanized) raceways junction box made out of 1.6 mm thick sheet steel with 3 mm thick Stainless steel cover including top surface buffing and fixing arrangment with stainless steel screws etc complete as required .

Providing and fixing 225 x 225 x 65 mm deep GI (hot dip galvanized) Junction box made out of 1.6 mm thick sheet steel with 3 mm thick steel cover including top surface buffing and fixing arrangment with stainless steel screws etc complete as required .

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP

Supply, Installation, Testing and commissioning of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. Specification no. EA-MOBI

Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill Ground Enhancing compound complete with all materials, testing & recording the results as per specification no ESE -LA

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no. EA-EP.

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP.

Supplying and erecting GI earth wire of high purity of different sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws in an approved manner.

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non-corrosive bond in an approved manner with required joints As per specification no. EA-EP.

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non-corrosive bond in an approved manner with required joints As per specification no. EA-EP.

Supply of Non Corrosive 10 mm copper bonded Round steel solid Conductor for Ring earthing to meet the requirements of IS/ IEC 62305 and IEC 62561-2.

Supply of Stainless steel Earthing stud with fixing clamp accessories of dimension 70 x 70 mm used to connect down conductor with earthing to meet the requirements of IS/IEC 62305.

Supply of Stainless steel Conductor Holder for fixing 10 mm copper bonded Round steel solid Conductor with fixing Screws/glue on side wall to meet the requirements for IS/IEC 62305.

Supply of Non Corrosive 10 mm copper bonded Round steel solid Conductor for down conductor inside the column to meet the requirements of IS/ IEC 62305 and IEC 62561-2.

Supply of multi purpose bonding clamp for interconnecting round conductor & reinforcement inside the concrete every floor to meet the requirements of IS/IEC 62305.

Supply of Stainless steel Straight Connector to intrconnect 10mm conductor at every floor of vertical raisers to meet the requirement for IS/IEC - 62305.

Supply of Diagonal clamp for holding the 10 mm copper coated conductor to the reinforcement to meet the requirements for IS/IEC 62305.

Supply of Stainless steel Earthing stud with fixing clamp accessories of dimension 70 x 70 mm used to connect down conductor with air termination to meet the requirements of IS/IEC 62305.

Supply of 8mm Aluminum Solid Round Conductor for building terrace as a air terminal to meet the requirements of IS/IEC 62305 and IEC 62561-2.

Supply of Conductor Holder for fixing Aluminium Conductor above concrete Parapet with fixing Screws/glue on parapet to meet the requirements for IS/IEC 62305.

Supply of Flat roof Conductor Holder for fixing Aluminium Conductor on terrace floor to meet the requirements for IS/IEC 62305.

Supply of Stainless Steel cross connector for 8- 10 mm round AL conductor to meet the requirement of IS/IEC - 62305.

Supply of Expansion Piece with connector to compensate the expansion and contraction of Solid Round Al. Conductor during temperature variations to be provided on conductors length over 20 meters with Expansion Piece Connector for to connect Solid Roung Al. Conductor at both ends to meet the requirements for IS/IEC 62305

Supply of 4 metre Vertical Air terminal of dia 16-10 mm with mounting accessories on flat surface to meet the requirements of IS/IEC 62305.Tested for Electrical ,Mechanical and Chemical as per IEC 62561.

Supply of 2 metre Vertical Air terminal of dia 16-10 mm with mounting accessories on flat surface to meet the requirements of IS/IEC 62305.Tested for Electrical ,Mechanical and Chemical as per IEC 62561.

Supply of Façade stud to fix at helipad area meet the requirement of IS/IEC 62305

Supply of straight connector for interconnecting 8mm Aluminium conductor to meet the requirement of IS/IEC 62305.Tested for Electrical , Mechanical and chemical as per IEC 62561.

Installation of Exothermic welding Joint: T-Joint, L - Joint/Straigjt Joint / X - Joint.

Supplying, installing on wall, testing and commissioning of following capacity Air Insulated Compact Type Rising Mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply with enclosure having IP-54 rating after fixing the tap off boxes and all accessories, made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 Nos aluminium bus bars having current density of 130 A/ sq cm at nominal current rating, necessary joints & expansion joints, provision of tapping at every metre, continuous earthing with 2 Nos aluminium strip of suitable size (one on each side) including, G.I. clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required. 250 A Isc = 25kA for 1 second

Supplying, installation, testing & commisioning of following capacity End Feed Unit for the existing Air Insulated Compact Type bus trunking/ rising mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick steel sheet enclosure (IP54) duly powder coated with provision to complete with necessary joints including clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required - AS PER SLD

Supplying, installation, testing & commisioning of ENDCOVER for provided capacity of rising mians with all privided fixing accessories.

Supplying, installing, testing and commissioning of following capacity 63 A TPN ISOLATOR tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with connections, earthing etc. as required.

Supplying, installing, testing and commissioning of following capacity 125A TPN ISOLATOR tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with connections, earthing etc. as required.

Providing printed instruction chart for treating persons suffering from electric shock, printed in English & Marathi and duly laminated complete.

Providing pair of duly tested rubber hand gloves as per IS :47705 suitable for working upto 22 kV supply complete.

Providing Round bottom fire bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook complete.

Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint complete.

Supplying and erecting wall hook 225mm projection for keeping fire buckets made out of 15 mm dia. M.S. Rod grouted in wall to a depth of minimum 15cms complete.

Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use, scissors, anti-septic solution, etc. (All above contents shall be of standard makes)

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class A insulation conforming to IS: 15652 – 2006 & CPRI tested having 2 mm thickness upto 3.3 kV

Supplying shock proof leather safety shoes of electrical grade of standard size as IS :11226, 14544 duly tested, with necessary test certificate from manufacturer.

C of Metering Cubicle- Supplying, erecting, testing, commissioning 11 kV HT metering cubical (compact type) approved by MSEDCL/licensee fabricated with 2 mm (14 SWG) M.S. sheets with supporting angle and channel, painted with powder coating / epoxy paint of required shade copper bus bar size 25x6 mm electronic security lock and heavy duty mechanical lock, with counter meter for measuring no of times the opening of doors, top side cover (CT,PT cover) interlock with meter doors, epoxy coated 3 nos CT having required ratio between 75/5 A to 100/5 A, VA10,class0.2S, 11000/V3/110/V3 VA 50, class 0.2 epoxy terminal block suitable for provided trivector meter, and provision for incoming and outgoing cables etc. complete duly tested by licensee with necessary test certificates and erected on provided plinth/ cc foundation Complete set as required

Supplying and erecting AC three phase HT CT multifunction net meter DLMS compliance of accuracy class 0.5, 3x 63.5V, 50Hz, with backlit LCD display, optical port & RS 232 port( measures import kWh, kVAh, export kWh, kVAh, net kWh, kVAh, V, I, kW, 6 months history of energy, load survey, TOD, tamper detection & logging, power ON/OFF events, instantaneous parameters of rating 1/5A with display in absence of power) with wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer.

SITC of Single breaker HT Panel. Supply Installation, Testing and Commissioning of 11kV outdoor type HT Panel, Metal Clad totally enclosed, dust and vermin proof, Floor mounting, free standing, with 1 No vaccum circuit breaker of vertical /Horizontal isolation, horizontal draw out type, rated for 630A with 26.2 kA fault withstand generally conforming to IS : 13118 as amended up to date ,mounted on suitable channel iron including grouting the channels etc as required. Refer SLD for details ( For Details Refer Technical Specifcation & Tender Booklet)

SITC of 3Way Compact RMU Panel. Supply Installation, Testing and Commissioning of 11kV outdoor type 3Way Compact RMU Panel, Metal Clad totally enclosed, dust and vermin proof, Floor mounting, free standing, with 3 Nos vaccum circuit breakers of vertical /Horizontal isolation, horizontal draw out type, rated for 630A with 26.2kA fault withstand generally conforming to IS : 13118 as amended up to date ,mounted on suitable channel iron including grouting the channels etc as required .Refer Technical Specification and Tender Booklet Complete set as required (As per SLD)

SITC of 4Way Compact RMU Panel. Supply Installation, Testing and Commissioning of 11kV outdoor type 3Way Compact RMU Panel, Metal Clad totally enclosed, dust and vermin proof, Floor mounting, free standing, with 4 Nos vaccum circuit breakers of vertical /Horizontal isolation, horizontal draw out type, rated for 630A with 26.2kA fault withstand generally conforming to IS : 13118 as amended up to date ,mounted on suitable channel iron including grouting the channels etc as required . For Detail Refer Technical Specification and Tender Booklete

SITC of 11kV Automatic Closed Transition Switch (ACTS) Panel Supplying, erection, Testing and commissioning of MV Automatic Closed transition Transfer Switch (ACTS) Panel having two separate vertical sections for Power and Control respectively in NEMA-1 enclosure. The ACTS must be UL listed & 3rd Party tested as per ANSI/IEEE C37.20.2 & ANSI/NEMA C37.55. The ACTS should be suitable for 11kV, 500MVA, 1200A, 3P, 50Hz System. Closed transition time for ACTS must be less than 100 milli seconds (ms). The VCB should be draw out type, UL listed and must have withstand capacity of 25kA for 3 secs at 15kV. The ACTS and its Microprocessor based controller must have total compliance with tender specification.”

Supplying , erecting & terminating 3C x 95 sq. mm. aluminium 11 kV(E), XLPE round armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification no. CB-HT

Supplying , erecting & terminating 3C x 240 sq. mm. aluminium 11 kV(E), XLPE round armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification no. CB-HT

Supplying , erecting & terminating 3C x 300 sq. mm. aluminium 11 kV(E), XLPE round armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification no. CB-HT

Providing and erecting Heat shrinkable out door termination kit for 11 kV ( E ) XLPE HT cable 3C x up to 95 sq. mm. with necessary material as per specification No. CB-JT/HT

Providing and erecting Heat shrinkable out door termination kit for 11 kV ( E ) XLPE HT cable 3C x 240 to 300 sq. mm. with necessary material as per specification no. CB-JT/HT

Providing and erecting Heat shrinkable straight through joint kit for 11 kV ( E ) XLPE HT cable 3C x 240 to 400 sq. mm. with necessary material as per specification no. CBJT/HT

Supplying, Installation, Testing and Commissioning of 630 kVA copper wound, ONAN naturally cooled type Outdoor type distribution Transformer ( Permissiable losses According IS 1180 Standards, Level-3 efficiency & Super ECBC ) with first filling of oil along with cooling arrangement, supporting channels at bottom with bidirectional rollers, suitable for 3 Ph, 50Hz, Delta/Star connected (Dyn11 vector group) with brought out neutral having no load voltage ratio of 11kV/433V complete with automatic ON Load tap changing circuit + 5% to -15% on H.V. side with HT cable chamber suitable for Heat/shrinkAble joint with XLPE cable and LT connection chamber suitable for connecting Bus duct arrangement and equipped with other essential accessories I/c SITC of remote tap changeover cubicle (RTCC), AVR i/c interconnection with adequate size of cables as required, installation of the transformer on suitable brick pedastal with CC base as per manufacturer standards etc as required. BMS Provisions need to made for transformer oil status, RTCC panel status, winding temperature etc., Complete set as required

Supplying, Installation, Testing and Commissioning of 1600 kVA copper wound, ONAN naturally cooled type Outdoor type distribution Transformer ( According IS 1180 Standards, Level-3 ) with first filling of oil along with cooling arrangement, supporting channels at bottom with bidirectional rollers, suitable for 3 Ph, 50Hz, Delta/Star connected (Dyn11 vector group) with brought out neutral having no load voltage ratio of 11kV/433V complete with automatic ON Load tap changing circuit + 5% to -15% on H.V. side with HT cable chamber suitable for Heat/shrinkAble joint with XLPE cable and LT connection chamber suitable for connecting Bus duct arrangement and equipped with other essential accessories I/c SITC of remote tap changeover cubicle (RTCC), AVR i/c interconnection with adequate size of cables as required, installation of the transformer on suitable brick pedastal with CC base as per manufacturer standards etc as required. BMS Provisions need to made for transformer oil status, RTCC panel status, winding temperature etc., Complete set as required

Supplying and erecting fencing of section having size 2450 mm in height from ground level and 1200 mm width with angle iron frame work erected in CC foundation and painted complete as per specification no SS-AS/FSG

Supplying and erecting 50 x 50 x 6 mm angle iron as corner support 2m long fixed at the middle of the fencing frame and the other side inclined at 30 degree angle, in cement concrete foundation of 15 x 15 x 40 cm complete duly painted with one coat of red oxide and two coats aluminum paint complete.

Supplying and erecting double leaf hinged door each 1500 mm in width x 1850 mm in height using B class, GI pipe with angle iron supports, chain link wire mesh (jali) complete supported on channel iron, erected in foundation, and painted complete as per specification no SS-AS/DLD

Supplying and spreading stone metal 25 mm size for 100 mm depth above the ground level complete.

Supply, Installation, Testing & commissioning of outdoor type 1000A, 50kA, 415V,4P(TP+N) +E, Sandwhich insulated type, Aluminium Bus duct( IS 8623) with the following configuration : 3 phase + 100 % neutral + 50 % internal earth, of (IP 55 with canopy) with metal clad enclosure made out of powder coated sheet steel in convinient sections complete with aluminium busbars, necessary joints, elbow joints, expansion joints, end flange with flexibles, continous earthing with 2nos aluminium strip of suitable size, one on each side including GI clamping brackets/Suspenders etc as per specifications. (From Trnasformer to LT kiosk, For Transformer 1, 2B ,5 & 6) Straight run (IP-55 Outdoor type)

End flange

Vertical bends

Horizontal bends

Copper Flexibles - RYBN Sets

Adaptor Box

Supply, Installation, Testing & commissioning of outdoor type 2500A, 50kA, 415V,4P(TP+N) +E, Sandwhich insulated type, Aluminium Bus duct( IS 8623) with the following configuration : 3 phase + 100 % neutral + 50 % internal earth, of (IP 55 with canopy) with metal clad enclosure made out of powder coated sheet steel in convinient sections complete with aluminium busbars, necessary joints, elbow joints, expansion joints, end flange with flexibles, continous earthing with 2nos aluminium strip of suitable size, one on each side including GI clamping brackets/Suspenders etc as per specifications. (From Trnasformer to LT kiosk, For Transformer 3A ) Straight run (IP-55 Outdoor type)

End flange

Vertical bends

Horizontal bends

Copper Flexibles - RYBN Sets

Adaptor Box

Supply, installation, testing and commissioning of Type tested panels as per IEC61439 suitable for 415 V, 3 phase, 50 Hz, 4 wire system with following ratings aluminium bus bars, fabricated with 2 mm thick CRCA sheet , free standing, totally enclosed, dust and vermin proof suitable for 3 phase and neutral, with following incoming and outgoing switches, meters, inter connections with suitable size aluminium cables / bars, complete with terminating arrangements with lugs, powder coating the panel, earthing, with cable chamber suitable for incoming bus trunking / cable termination, aluminium busbar chamber etc., generally conforming to CPWD specification for electrical works (Part I Internal 2013) amended up to date. (ALL THE MCCBS shall be with rotary operating handle and wherever cables are to be terminated, suitable spreader terminals shall be provided. In Case of termination of copper conductor cable the terminals shall be wired and brought to the cable chamber with suitable DIN Channel mounted connectors) Transformer Center-1 - Main LT Panel - 1 For Detiales REfer TEchnical specification and Tender Booklete

Transformer Center - 2B Main LT Panel - 2B For Detailes Refer Technical Specification and Tender Boklet

Transformer Center - 3 Main LT Panel - 3 For Detailes Refer Technical Specification and Tender Boklet

Transformer Center - 5 Main LT Panel - 5A For Detailes Refer Technical Specification and Tender Boklet

Transformer Center - 5 Main LT Panel - 5B For Detailes Refer Technical Specification and Tender Boklet

Transformer Center-1 APFCR and Hormonic filters Panel - 100kVAR For Detailes Refer Technical Specification and Tender Boklet

Transformer Center-2B APFCR and Hormonic filters Panel - 250kVAR For Detailes Refer Technical Specification and Tender Boklet

Transformer Center-3 APFCR and Hormonic filters Panel - 400kVAR For Detailes Refer Technical Specification and Tender Boklet

Transformer Center-5A APFCR and Hormonic filters Panel - 100kVAR For Detailes Refer Technical Specification and Tender Boklet

Transformer Center-5B APFCR and Hormonic filters Panel - 200kVAR For Detailes Refer Technical Specification and Tender Boklet

CONVENTIONAL WELDED PANELS Outdoor Feeder pillar For Detailes Refer Technical Specification and Tender Boklet

Street light Panel-1 & 2 For Detailes Refer Technical Specification and Tender Boklet

Campus Internal pathway lighting Panel For Detailes Refer Technical Specification and Tender Boklet

CHILLER PANEL -1 ( INDOOR TYPE) For Detailes Refer Technical Specification and Tender Boklet

COOLING TOWER PANEL ( OUTDOOR TYPE) For Detailes Refer Technical Specification and Tender Boklet

PHE PANEL-1 (INDOOR TYPE) For Detailes Refer Technical Specification and Tender Boklet

PHE PANEL-2 (OUTDOOR TYPE) For Detailes Refer Technical Specification and Tender Boklet

PUMP STARTER PANEL -1 ,2,3 (OUTDOOR TYPE) For Detailes Refer Technical Specification and Tender Boklet

AIXL FAN STARTER PANEL for UGR (INDOOR TYPE) For Detailes Refer Technical Specification and Tender Boklet

STP PANEL-1 ,2 (OUTDOOR TYPE) For Detailes Refer Technical Specification and Tender Boklet

MAIN FIRE FIGHTING PANEL For Detailes Refer Technical Specification and Tender Boklet

FIRE PUMP SKID PANEL For Detailes Refer Technical Specification and Tender Boklet

Supplying, erecting & terminating XLPE armoured cable 4 core 25 sq. mm. copper conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armoured cable 3½ core 35 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½ core 50 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½ core 70 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½ core 95 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½ core 120 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½ core 150 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 1100 V. 3½ core 185 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½core 240 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½ core 300 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½core 400 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XPLE armoured cable 4 core 16 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armoured cable 3 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armoured cable 3 core 10 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armoured cable 3 core 16 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armoured cable 3 core 25 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armoured cable 4 core 16 sq. mm. copper conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying & erecting cast iron cable indicator plate buried along with route of cable for PVC / XLPE armoured cable as per specification no. CB-CIP

Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 25 to 50 sq. mm. cable, with necessary material as per specification no. CB-JT/LT

Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 70 to 95 sq. mm. cable, with necessary material as per specification no. CB-JT/LT

Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 120 to 185 sq. mm. cable, with necessary material as per specification no. CB-JT/LT

Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 300 sq. mm. cable, with necessary material as per specification no. CB-JT/LT

Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 400 sq. mm. cable, with necessary material as per specification no. CB-JT/LT

Providing & erecting Hot dipped galvanized ladder type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 300 mm width & 100 mm height comprising all required standard accessories.

Providing & erecting Hot dipped galvanized ladder type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 500 mm width & 100 mm height comprising all required standard accessories.

Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 300 mm width & 20 mm height complete with necessary hardware in approved manner.

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP

Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill Ground Enhancing compound complete with all materials, testing & recording the results as per specification no ESE -LA

Supply, Installation, Testing and commissioning of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. Specification no. EA-MOBI

Supplying and erecting GI earth wire of high purity of different sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws in an approved manner.

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non-corrosive bond in an approved manner with required joints As per specification no. EA-EP.

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non-corrosive bond in an approved manner with required joints As per specification no. EA-EP.

Providing printed instruction chart for treating persons suffering from electric shock, printed in English & Marathi and duly laminated complete.

Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use, scissors, anti-septic solution, etc. (All above contents shall be of standard makes)

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class A insulation conforming to IS: 15652 – 2006 & CPRI tested having 2 mm thickness upto 3.3 kV

Supply, installation, testing and commissioning of 40W High efficient LED Postop luminaire with PWM Driver having 0 to 10volts or 10 to 1volt dimming, housing with Aluminium pressure Die cast housing, Lenses for superior performance,Toughened glass cover with IP66 protection, Suitable for pole dia. Up to 60-76mm. Luminaire lumen>120lm/w, CRI >80,Temperature range- 0 to 40DegC, Driver efficiency>90%, Power factor>0.95, THD<10%, Colour Temperature- 4000-5700K, Surge protection 4KV, Multistage Isolated Constant Current Operated driver with range 220-240V AC with required necessary to mounting arrangement to mount on 2.5/4.5mtr GI pole provided accessories to complete the job.

Supply, installation, testing and commissioning of 20W High efficient LED Postop luminaire with PWM Driver having 0 to 10volts or 10 to 1volt dimming, housing with Aluminium pressure Die cast housing, Lenses for superior performance,Toughened glass cover with IP66 protection, Suitable for pole dia. Up to 60-76mm. Luminaire lumen>120lm/w, CRI >80,Temperature range- 0 to 40DegC, Driver efficiency>90%, Power factor>0.95, THD<10%, Colour Temperature- 4000-5700K, Surge protection 4KV, Multistage Isolated Constant Current Operated driver with range 220-240V AC with required necessary to mounting arrangement to mount on 2.5/4.5mtr GI pole provided accessories to complete the job.

Supply, installation, testing and commissioning of 10W Bollard light , 500mm height with MS housing 2mm wall thickness & Black matt powder coated, Special translucent PMMA milky tube for better Light Transmission, High Luminous Flux imported LEDs for better light output, Product is designed for IP 65 protection, Electronic control gear duly wired up to the terminal block. Luminaire lumen>100lm/w, CRI >70,Temperature range- 0 to 50DegC, Driver efficiency>85%, Power factor>0.95, THD<10%, Colour Temperature- 4000-5700K, Surge protection 2KV, Multistage Isolated Constant Current-Constant Voltage Operated driver with range 220-240V AC with required necessary mounting accessories inculding GI bolts and nuts to complete the job.

Supply, installation, testing and commisioning of 30W LED Flood luminaire with Aluminium pressure Die cast housing parts for long life, Polycarbonate diffuser for superior performance, Toughened glass with silicon gaskets for IP66 protection, Complete assembly with LED, Driver and accessories pre- wired up to terminal block. LED Efficacy>150lm/W , CRI >70,Temperature range- 0 to 40DegC, Driver efficiency>85%, Power factor>0.95, THD<10%, Colour Temperature- 4000-5700K, Surge protection 4KV, Multistage Isolated Constant Current Operated driver with range 150-270V AC and Safety Extra Low Voltage inculding all necessary mounting accessories.( For Transformer centers & DG Yard)

Supply, installation, testing and commissioning of 24-30W Suspended medium highbay light for the cable mounting,well glass with sigle piece PDC aluminium alloy housing to ensure the optimal thermal management with UV stabilized injection moulded pc diffused allows good light trransmission, Product is designed for IP 65 protection, Electronic control gear duly wired up to the terminal block.LT grey nano technology powder coating, Luminaire lumen>100lm/w, CRI >70,Temperature range- 0 to 50DegC, Driver efficiency>85%, Power factor>0.95, THD<10%, Colour Temperature- 4000K, Surge protection 2KV, Multistage Isolated Constant Current-Constant Voltage Operated driver with range 220-240V AC with required necessary mounting accessories inculding GI bolts and nuts to complete the job.

Supply, installation, testing and commissioning of 75W Flame proof floor light with aluminium alloy housing to ensure the optimal thermal management with UV stabilized injection moulded pc diffused allows good light trransmission, Product is designed for IP 65 protection, Electronic control gear duly wired up to the terminal block. LED efficacy >100lm/W ,Driver efficiency>85%, Power factor>0.95, THD<10%, Colour Temperature-4000-5700K Surge protection 2KV, with required necessary mounting accessories inculding GI bolts and nuts to complete the job.

Supply, installation of Steel Rope 9-12mm dia. Rope made of tense Stailnless steel to be laid between poles,Cable fasteners can be attached without the use of tools and adjusted quickly and easily,no cable sag, the tightening tool can be used with the heavy-duty fasteners up to 330 lbs to support the light fixture with required connection accessories..

Supplying, erecting & terminating of steel braided copper cable, 3C x 4Sq.mm with circular fine wire condutor pvc type with inculding necessary terminating accessories for caternary lighting suitable to mount on overhead pole and also can bear the weight of the light fixtures.

Supplying & erection of Post top light pole of the following sizes made out of C class GI pipe with 300 mmx 300mmx 10mm thick base plate welded at bottom and provided with earth stud, clamps for holding 2nos 50 mm dia HDPE Pipe/bend for cable entry (to street light box) opening for wire entry (from Box to Street light pole), including providing 2 Nos. suitable 25 x 3 mm GI strip duly welded for pole with suitable holes with tap for fixing thermo plastic street light box including painting with one coat of Anti-corrosive Primer and two or more coats of automobile grade matallic paint of approved brand and shade as required. (The Pole drawing shall be got approved before manufacturing the pole from the department). a) 65mm dia, 4.5 mtr long for Prephiery lights

b) 65mm dia, 3 mtr long for Catenery lights

c) 65mm dia, 2.5 mtr long for internal campus lights

Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying & erecting mains with 2x2.5 sq.mm. and earth wire 1.5 sq.mm FRLSH PVC copper wire in HMS PVC conduit min. 20mm dia. as per specification No: WG-MA/PC.

Providing & fixing junction box having size of 300x300mm & height of 80mm complete with Bakelite terminal strip of 16A/500V rating with cover having IP54 grade protection class includes dismantling of existing Junction box if any. This job includes dismantling of existing inspection/maintenance box if any.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supply, installation, testing and commisioning of Samrt lighting controller with network devices, smart controller, cluster head, repeater, sensor node and remote management console, node to node communicationrange of 29mtr in open air. Smart lighting controller should allow the light fixture to lit minimum lumens during non-occupancy or in the absent of vehicularr movement or bycycle or pedestrian movement and shall lit up to to the max brightness during the presence of any one case vise versa. Smart controller shall also include Human centric motion sensors(PIR/HR), Photo, Temperature, Humidity, rain sensors. Refer detailed specs in DTP for detailed specifications.

Supply, installation, testing and commisioning of Power Supply for the Processor with necessary required accessories

Supply, installation, testing and commisioning of Cluster head to controll the zones of light fixtures not less than 150 fixtures.

Supply, installation, testing and commisioning of Pole mounted Occupany sensor outdoor type(IP 65) with time profile,Ambient profile(light level, temperature). Supports upto 64 lighting zones in any combination, 12 lighting zones shall be activated in one time.Sensor shall enable Luminairies to go to full brightness in case of failure. It Should be Compact, easy to install,plug&play, and shall detect the man portable movementof pedestrian, bicycle and cars(upto 50km/hr).

Supply & Installation of 16mtr height Specially designed single arm double row arched bracket suitable for mounting four flood lighting with pole sections are welded using special v groove technique by certified welders using high end MIG welding processes.Suitable for sports ground • Built-in control box with service door including lock and safety chain. • The control gear tray is prewired with MCB, terminal connectors for loop-in loop-out arrangement.

Supply & Installation of 6X60W LED flood light fixture with LED efficacy >120lm/W to mount on pole with necessary mounting accessories.Suitable for sports area.

Supplying & erecting aviation obstruction light consisting of yellow painted die-cast aluminium alloy housing with integral LED aviation light comprising of aluminium housing with polycarbonate enclosure complete.

Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation in an approved manner.

Supply & Installation of Wall Washer Light, 50-60W, Power Module LED 4000k-5700K, IP66 It's made of high pressure die-casting aluminium with electrostatic plastic coating for surface. It resist the impact & friction.Painted with polyester powder coating in Standard Grey Colour. IP Rating - IP 66. Length-1000mm,Width- 104mm, Height-125mm Weight - 4Kgs.,Power LED's Module with LED efficacy >100lm/W Individual LED on Printed Circuit Board with metal core plate.Electronic Power Supply for LED Module,which offers Protection against Short Circuit, Over- Voltage & Over-Current, with in-built surge protection. Multiple Beam angles options avilable to serve the different lighting needs.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 160 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 175 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 200 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Providing printed instruction chart for treating persons suffering from electric shock, printed in English & Marathi and duly laminated complete.

Providing pair of duly tested rubber hand gloves as per IS :47705 suitable for working upto 22 kV supply complete.

Providing Round bottom fire bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook complete.

Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint complete.

Supplying and erecting wall hook 225mm projection for keeping fire buckets made out of 15 mm dia. M.S. Rod grouted in wall to a depth of minimum 15cms complete.

Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use, scissors, anti-septic solution, etc. (All above contents shall be of standard makes)

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class A insulation conforming to IS: 15652 – 2006 & CPRI tested having 2 mm thickness upto 3.3 kV

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class B insulation conforming to IS: 15652 – 2006 & CPRI tested having 2.5 mm thickness upto 11 kV

Supplying shock proof leather safety shoes of electrical grade of standard size as IS :11226, 14544 duly tested, with necessary test certificate from manufacturer.

Providing, Installing, Testing and Commissioning of Five Star Rated indoor type(without acoustic enclosure)Diesel Generating set along with all accessories having Prime Power Rating of 1010 kVA, 11 kV at 1500 RPM, 0.8 lagging power factor suitable for 50 Hz, 3 phase system consisting of the followings: a. Diesel Engine: Diesel engine 4 stroke water cooled, electric start, of suitable BHP at 1500 RPM suitable for above output of alternator at 40 Degree C, 50% RH & at 310 Meter MSL and 5514, BS 649, IS 10000, capable of taking 10% over loading for one hour after 12 hours of continuous operation. The engine shall be fitted complete with all the required accessories. Diesl Engine shall be suitable for continuous operation of generator set prime duty inclusive of fly wheel flexible coupling air cleaner corrosion resistor radiator fan with guard fuel pump fuel filter, Electronic governor electrical starting system with starter 24V battery, voltage regulator instrument panel, kWh meter with RPM indicator, Exhaust silencer protections against low lubrication oil pressure, high water temperature BMS Compatiable for DG sets with RS-485/Modbus port. For Details REfer technical specification and Tender Booklet Complete set as required

DG ISOLATOR PANELSupply ,Installation,Testing and Commissioning of 11kV Isolator panel for DG sets inculding enclosure and all fixing accessories.

11kV DG Synchronous panelSupply ,Installation,Testing and Commissioning of Programmable logic controller based panel capable of detecting mains failure, auto change over from mains to DG sets supply and interlocking of VCBs auto synchoronizing, auto load management function along with annunciation for alternator control and protection also with total manual over ride facility,capable of smooth transfer of DG set operation from PLC to manual system and vice versa without any interruption or tripping,complete with all auxiliary relays,timers,contactors,programmable logic controller,control wiring,inter connections for 11 kV DG sets operation complete etc as required.( The PLC should be capable of controlling 2 nos 11kV 1010 kVA DG sets at present and 2 more number of 11 kV 2000 kVA DG set in future) BMS Compatiable for DG sets with RS-485/Modbus port

Netural Grounding Resistor Panel (NGR) -Supply ,Installation,Testing and Commissioning of Neutral grounding resistor panel made of MS sheet steel enclosure, indoor metal clad, dust & vermin proof , Temperature rise up to 375 Deg.C above ambient temperature, Thermostat panel,star formation bus bar and lamp indication as per IS 8623, cubicle mounitng type with front open arrangement with hinged door consisting of resistors of stainless steel, copper/nickel alloy suitable to limit the fault current to a safer value and capable of with standing the fault current for sufficient time for 11 kV 1010kVA alternator complete etc as required. EQUIPMENT 11kV 400A Isolator + Vacuum Contactor.FDR -I/C-N1-N2,N3,N4 - 2 No`s Each comprising of following :

Battery charger Supply,installation, testing and commissioning of automatic FLOAT-CUM-BOOST battery charger unit with fast response SCR controled full wave bridge rectifier( 2D+2 SCR) complete with double wound copper conductor main transformer,surge suppressor at the input side,auto float/manual float/manual boost with double pole ON/OFF MCB,at AC input, pilot lamp for charger "ON" indication, other protections, etc with all necessary features as per standards.Battery Charger 24 V DC output , 30 Amps as above including 1 no Integral DC distribution board with 1 No 63 A DP DC MCB incomer and 10 Nos 16 A DP MCBs outgoings The Charger shall be complete with all accessories suitable for 150/180 AH Batteries . The charger enclosure shall be with Powder coated finish complete as required.

DG Stack with height of 30Mtrs Supplying and fixing exhaust gas piping of following dia. welded black MS, B class pipe conforming to IS : 3589 cut to required lengths and installed with necessary bends and clamps, anti-vibration mountings, insulation of exhaust system with mineral wool/ Rockwool 50mm thick, wiremesh & aluminum cladding etc., as required as per specifications for the following DG set.(The item shall be meassured on linear basis per each run of exhaust piping from outlet of silencer to end of exhaust piping). a) For 1010kVA DG set 14" Class B Pipe

14" Class B Pipe Bends

Insulation and 24 guage aluminium cladding for above exhaust pipe

Insulation and 24 guage aluminium cladding for silencer

Supplying and fixing of MS Self Supporting structure made of MS Channels and MS angles on existing CC foundation for supporting the exhaust piping of the DG Set including painting with zinc chromite primer and aluminium/ synthetic enamel paint etc as required. (The weight for payment will be arrived by theritical calculation of weight of structural members subject to confirmation of weight of sample piece of each size)

Supplying and fixing of Msstructural supports for Pipes,Silencers,bends, Fuel tank with one coat of Red oxide primer and double coat of enamel paint .

Supplying & erecting aviation obstruction light consisting of yellow painted die-cast aluminium alloy housing with integral LED aviation light comprising of aluminium housing with polycarbonate enclosure complete.

Supplying and erecting distribution class, 11 kV thyrite type lightning arrester with nut bolts, on provided MS channel as per specification no. OH-INS/LA

Fabrication,SITC of factory tested (for a pressure of 5 lbs per sq.inch) 20 KL capacity storage tank made of 5mm thick MS plate in conformity with the specifications of The Chief Controller of Explosives alongwith manhole, arrangement for dip measurement, endplate, ' T ' section stiffeners, graduated aluminium dip rod with calibration chart including provision for fixing airvent arrangement, connecting inlet and outlet pipe line systems (Airvent and inlet/outlet pipe line will be paid separately.), anticorrosive primer painting etc. complete as reqd.Installation of above tank in a pit of suitable size including excavation, laying a levelling coarse of PCC at the bootom, fabrication and fixing necessary fastner claping,/ refilling leveling etc., as reqd.

SITC of 990Ltr HSD Intermediate Tank

SITC of 990Ltr HSD overflow Tank

SITC of 80mm dia Class C Fule Pipe

SITC of 50mm dia Class C Fule Pipe

SITC of 40mm dia Class C Fule Pipe

SITC of 80mm dia Ball valve with flange end

SITC of 50mm dia Ball valve with flange end

SITC of 40mm dia Ball valve with flange end

SITC of 50mm NRV

SITC of 50mm Y Strainer

SITC of flame proof 2HP motor with starter

SITC of flame arrestor for HSD UG tank

SITC of 80mm solinoid valve

SITC of fuel flow meter with RS 485

Supply & Erecting of 12C x 2.5 Sq.mm multistrand PVC insulated copper conductor armoured control cable inculding terminations and suitable size lugs..

Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV

Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV

Supplying and erecting PVC insulated PVC round sheathed 4 sq.mm (56 no. x 0.30 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV

Supplying and erecting of Acousticallly treated Fresh air & Hot air louvers Box with GI sheet inculding all necessary fixing accessories.

Supplying and erecting of Acousticallly treated Fresh air & Hot air louvers suitable to reduce 30db sound level inculding all necessary fixing accessories.

Supplying and erecting of Rain protection Fresh air & hot air Fins inculding all necessary fixing accessories.

Supplying and erecting of Acoustic wall panels inculding all necessary fixing accessories.

Supplying and erecting of Double leaf acoustic door inculding all necessary fixing accessories.

Supplying and erecting of Sing leaf acoustic door inculding all necessary fixing accessories.

Supplying and erecting of Canvas Cloth in between Radiator to Hot air louvers inculding all necessary fixing accessories.

Supplying and erecting of Hot air GI sheet ducting SWG 22 inculding all necessary fixing accessories.

Liasoning charges for obtaining consent for operation of DG SET under Pollution Control Board

Liasioning charges for obtaining approval from CEIG for opertaion of DG set from ADDL.Chief Inspectorate.

Liasonong charges for obtaining approvals and license from department of Explosives for the facility and local authority

SITC of Electric Traction Passenger Lift with · Rated capacity :- 6 Passenger/408Kg · Floors :- G+1 floor (2Stops/2 Landings) ,· Travel :- 3 to 4.2 mtrs ,· Location of Lift Machine:- MR/MRL,· Rated speed :- 1.0mps VS,Doors type :- COPO/TOPO Doors with frame having clear opening of 800 mm wide x 2000mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves/frames ,· Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc.· COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor Clear Car size of 1000mm wide x 1100mm deep x 2000mm high , LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings,· ARD complete with necessary SMF VRLA batteries ,· Fireman controller having fireman switch at fire Landing, CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for 60 days with 18" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge. · Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT.Additional featres : Anti nuesense car call cancellation. Car call cancellation by double pressing.Should have audio assistance, · Lift shaft available having clear size of 1550mm wide x 1500mm deep, 1600mm Pit depth, 4500mm overhead. for Details Refer Technical speciifcation and Tender Booklet

SITC of Electric Traction Passenger Lift · Rated capacity :- 8 Passenger/544Kg ,· Floors :- G+2 floor (3Stops/3 Landings) · Travel :- 3 to 4.2 mtrs , Location of Lift Machine:- MR/MRL ,· Rated speed :- 1.0mps VS, Doors type :- COPO/TOPO Doors with frame having clear opening of 800 mm wide x 2000 mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves/frames , Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor Clear Car size of 1300mm wide x 1100mm deep x 2000mm high LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class · ARD complete with necessary SMF VRLA batteries Fireman controller having fireman switch at fire Landing, CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for 60 days with 18" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge.· Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT. Additional featres : Anti nuesense car call cancellation. Car call cancellation by double pressing.Should have audio assistance · Lift shaft available having clear size of 1900mm wide x 1900mm deep. 1600mm Pit depth, 4500mm Overhead. For Details Refer Technical specification and Tender Booklet

SITC of Electric Traction Passenger Lift Rated capacity :- 8 Passenger/544Kg , Floors :- G+5 floor (6Stops/6 Landings) Travel :- 4 to 5.5 mtrs· Location of Lift Machine:- MR/MRL , Rated speed :- 1.0mps VS,· Doors type :- COPO/TOPO Doors with frame having clear opening of 800 mm wide x 2000 mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves/frames, Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc.· COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor,Clear Car size of 1300mm wide x 1100mm deep x 2000mm high , LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings, Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class , ARD complete with necessary SMF VRLA batteries Fireman controller having fireman switch at fire Landing, CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for 60 days with 18" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge. Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength · Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT.· Lift shaft available having clear size of 1900mm wide x 1900mm deep. 1600mm Pit depth, 4500mm Overhead. For Deatils Refer TEchnical specification and Tender Booklet

SITC of Electric Traction Passenger Lift Rated capacity :- 8 Passenger/544Kg , Rated capacity :- 8 Passenger/544Kg ,· Travel :- 3 to 4.2 mtrs,· Rated speed :- 1.0mps VS · Doors type :- COPO/TOPO Doors with frame having clear opening of 800 mm wide x 2000 mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves/frames Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor Clear Car size of 1300mm wide x 1100mm deep x 2000mm high LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class ARD complete with necessary SMF VRLA batteries · Fireman controller having fireman switch at fire Landing,· · Lift shaft available having clear size of 1900mm wide x 1900mm deep. 1600mm Pit depth, 4500mm Overhead. CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for 60 days with 18" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge. Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength · Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work · Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT.

SITC of Electric Traction Passenger Lift ,Rated capacity :- 8 ,Floors :- G+7 floor (8Stops/8 Landings) Passenger/544Kg , Travel :- 3 to 4.2 mtrs,· Location of Lift Machine:- MR/MRL,· Rated speed :- 1.0mps VS,· Doors type :- COPO/TOPO Doors with frame having clear opening of 800 mm wide x 2000 mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves/frames Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor Clear Car size of 1300mm wide x 1100mm deep x 2000mm high LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class ARD complete with necessary SMF VRLA batteries Fireman controller having fireman switch at fire Landing, CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for 60 days with 18" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge.· Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work, Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT. Lift shaft available having clear size of 1900mm wide x 1900mm deep. 1600mm Pit depth, 4500mm Overhead.

SITC of Electric Traction Passenger Lift with · Rated capacity :- 15 Passenger/1020Kg · Floors :- G+5 floor (6Stops/6 Landings)· Travel :- 4 to 5.5 mtrs Location of Lift Machine:- MR/MRL [applicable for Passenger Lift with MRL only & Stretcher/Hospital Lift with MR & MRL]· Travel :- 4 to 5.5 mtrs ,· Rated speed :- 1.0mps VS, Doors type :- COPO/TOPO Doors with frame having clear opening of 800/900/1000 mm wide x 2000mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves /frames Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor, Clear Car size of 1100mm wide x 2200mm deep x 2000mm high LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings, Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor/ control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class ARD complete with necessary SMF VRLA batteries Fireman controller having fireman switch at fire Landing,· CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for 60 days with 18" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge. Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength · Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work. Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT. Lift shaft available having clear size of 2200mm wide x 2700mm deep, 1600mm Pit depth, 4700mm Overhead.

SITC of Electric Traction strecther Lift with Rated capacity :- 15 Passenger/1020Kg ,Floors :- G+5 floor (6Stops/6 Landings) Travel :- 4 to 5.5 mtrs Location of Lift Machine:- MR/MRL [applicable for Passenger Lift with MRL only & Stretcher/Hospital Lift with MR & MRL]Doors type :- COPO/TOPO Doors with frame having clear opening of 800/900/1000 mm wide x 2000mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves /frames Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor Clear Car size of 1600mm wide x 1550mm deep x 2000mm high LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor/ control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class ARD complete with necessary SMF VRLA batteries · Fireman controller having fireman switch at fire Landing, CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for 60 days with 18" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge. Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work. Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT. Lift shaft available having clear size of 2550mm wide x 2100mm deep, 1600mm Pit depth, 4700mm Overhead.

SITC of Electric Traction strecther Lift with Rated capacity :- Rated capacity :- 15 Passenger/1020Kg Floors :- G+6 floor (7Stops/7 Landings) Travel :- 3 to 4.2 mtrs ,· Travel :- 3 to 4.2 mtrs , Location of Lift Machine:- MR/MRL [applicable for Passenger Lift with MRL only & Stretcher/Hospital Lift with MR & MRL] Doors type :- COPO/TOPO Doors with frame having clear opening of 800/900/1000 mm wide x 2000mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves /frames Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor Clear Car size of 1600mm wide x 1550mm deep x 2000mm high Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor/ control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class ARD complete with necessary SMF VRLA batteries Fireman controller having fireman switch at fire Landing, CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for 60 days with 18" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge. Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT.

SITC of Electric Traction strecther Lift with Rated capacity :- 15 Passenger/1020Kg ,· Floors :- G+7 floor (8Stops/8 Landings) · Travel :- 3 to 4.2 mtrs Location of Lift Machine:- MR/MRL [applicable for Passenger Lift with MRL only & Stretcher/Hospital Lift with MR & MRL] Rated speed :- 1.0mps VS Doors type :- COPO/TOPO Doors with frame having clear opening of 800/900/1000 mm wide x 2000mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves /frames COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor Clear Car size of 1600mm wide x 1550mm deep x 2000mm high LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor/ control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class ARD complete with necessary SMF VRLA batteries · Fireman controller having fireman switch at fire Landing, CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for 60 days with 18" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge. Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work. Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT

STP,WTP & PUMPS- Supply, Installation, Testing, & Commissioning of a pre-engineered, factory fabricated, assembled & tested, fully integrated, highly efficient pump, IE5 permanent magnet motors, skid mounted, complete ready-to-connect packaged variable speed pressure boosting system. The packaged variable speed water pressure booster system should operate on proportional pressure control mode based on external flow meter connected to the pump controller. The system shall be complete with vertical multi stage centrifugal main pumps and pilot pump connected in parallel(pilot pump capacity should be designed for 20% of one main pump capacity), high efficiency IE 5 motors with integrated variable frequency drive for each pump, intelligent multi-pump controller. The controller shall be mounted in a control cabinet with an IP 41 enclosure of suitable rating, digital energy meter in the control panel; Modbus for BMS; hot Dipped Galvanised suction and delivery manifolds; isolation ball valves on suction and discharge of each pump; non return valve on discharge side of each pump; flow meter with 4-20mA output; hot dip galvanised common base frame; and diaphragm pressure vessel PN16 ( Domestic water supply pump )(Overall efficiency including drive losses to be not less than 70% ) For Details Refer Technical Specification and Tender Book let Complete set as above

Supply, Installation, Testing, & Commissioning of a pre-engineered, factory fabricated, assembled & tested, fully integrated, highly efficient pump, IE5 permanent magnet motors, skid mounted, complete ready-to-connect packaged variable speed pressure boosting system. The packaged variable speed water pressure booster system should operate on proportional pressure control mode based on external flow meter connected to the pump controller. The system shall be complete with vertical multi stage centrifugal main pumps and pilot pump connected in parallel(pilot pump capacity should be designed for 20% of one main pump capacity), high efficiency IE 5 motors with integrated variable frequency drive for each pump, intelligent multi-pump controller. The controller shall be mounted in a control cabinet with an IP 41 enclosure of suitable rating, digital energy meter in the control panel; Modbus for BMS; hot Dipped Galvanised suction and delivery manifolds; isolation ball valves on suction and discharge of each pump; non return valve on discharge side of each pump; flow meter with 4-20mA output; hot dip galvanised common base frame; and diaphragm pressure vessel PN16 (Flushing water supply pump )(Overall efficiency including drive losses to be not less than 70% ) ForDetails Refer TEchnical specification and Tender Booklet Complete set as above

Supply, Installation, Testing, & Commissioning of a pre-engineered, factory fabricated, assembled & tested, fully integrated, highly efficient pump, IE5 permanent magnet motors, skid mounted, complete ready-to-connect packaged variable speed pressure boosting system. The packaged variable speed water pressure booster system should operate on proportional pressure control mode based on external flow meter connected to the pump controller. The system shall be complete with vertical multi stage centrifugal main pumps and pilot pump connected in parallel(pilot pump capacity should be designed for 20% of one main pump capacity), high efficiency IE 5 motors with integrated variable frequency drive for each pump, intelligent multi-pump controller. The controller shall be mounted in a control cabinet with an IP 41 enclosure of suitable rating, digital energy meter in the control panel; Modbus for BMS; hot Dipped Galvanised suction and delivery manifolds; isolation ball valves on suction and discharge of each pump; non return valve on discharge side of each pump; flow meter with 4-20mA output; hot dip galvanised common base frame; and diaphragm pressure vessel PN16 ( HVAC make up water supply pump ) (Overall efficiency including drive losses to be not less than 70% ) ForDetails Refer TEchnical specification and Tender Booklet Complete set as above

Supply, Installation, Testing and commissioning of Openwell Submersible pumpset having Bronze impeller, Stainless steel shaft with adequate HP motor capable of giving a discharge of 50 Cum/hr against a total head 30.00 Mtr to work on a three phase, 50 cycles, 400/440 Volts with ball/ butterfly valve, non-return valve at delivery side, control Panel, Pump Sleeves, Level Controller etc., (The incoming cable for starter and earthing shall be done by other agency) (1W+1S ) ( From Pond -02 To Pond-01 )

Supply, Installation, Testing and commissioning of Openwell Submersible Pumpset having Bronze impeller, Stainless steel shaft with adequate HP motor capable of giving a discharge of 70 Cum/Hr against a total head 30.00 Mtr to work on a three phase, 50 cycles, 400/440 Volts with ball/ butterfly valve, non-return valve at delivery side, control Panel, Pump Sleeves, Level Controller etc., (The incoming cable for starter and earthing shall be done by other agency) (1W+1S ) ( From Pond-1 to Pond water Sump )

Supply, Installation, Testing and commissioning of Openwell Submersible Pumpset having Bronze impeller, Stainless steel shaft with adequate HP motor capable of giving a discharge of 10 Cum/Hr against a total head 30.00 Mtr to work on a three phase, 50 cycles, 400/440 Volts with ball/ butterfly valve, non-return valve at delivery side, control Panel, Pump Sleeves, Level Controller etc., (The incoming cable for starter and earthing shall be done by other agency) (1W+1S ) ( From Pump room sump pit to External drain )

Supply, Installation, Testing and commissioning of Openwell Submersible Pumpset having Bronze impeller, Stainless steel shaft with adequate HP motor capable of giving a discharge of 70 Cum/Hr against a total head 30.00 Mtr to work on a three phase, 50 cycles, 400/440 Volts with ball/ butterfly valve, non-return valve at delivery side, control Panel, Pump Sleeves, Level Controller etc., (The incoming cable for starter and earthing shall be done by other agency) (1W+1S ) ( From Municipal UG tank to to Pond water Sump )

DOMESTIC WATER TEATMENT PLANTFILTER FEED WATER PUMPS (For PSF & ACF) Supplying, installing, testing and commissioning of 3 Nos. Monoblock type raw water pumps (2W + 1S) for pumping the water from raw water U.G. sump through pressure sand filter, activated carbon filter, softener and chlorine doser to filtered water UG sump. The pump shall be coupled to adequate H.P. electrical motor, mounted on a common base frame.The rate quoted shall be inclusive of the following:Suitable control panel with energy meter (three phase kw / hr meter 32 amps with reverse rotation stop, class 1.0 flush mounting) indoor wall mounting type with auto change over switch for changing over from EB to DG supply, change over switch for pump change over, including dry run protection.3 nos. slim seal flap type check valve with CI body and cast steel disc tested to PN - 10kg / sq.cm pressure including a set of GI flanges as per BS - 10 table1 including bolts, nuts, GI washers and neoprene rubber gaskets complete etc., (Inter valve / Audco make) on the delivery side. (For Details Refer Technical Specification and TEnder Booklet )

HVAC & FLUSHING WATER TEATMENT PLANTFILTER FEED WATER PUMPSSupplying, installing, testing and commissioning of 3 Nos. Monoblock type raw water pumps (2W + 1S) for pumping the water from raw water U.G. sump through pressure sand filter, activated carbon filter, softener and chlorine doser to filtered water UG sump. The pump shall be coupled to adequate H.P. electrical motor, mounted on a common base frame.The rate quoted shall be inclusive of the following:Suitable control panel with energy meter (three phase kw / hr meter 32 amps with reverse rotation stop, class 1.0 flush mounting) indoor wall mounting type with auto change over switch for changing over from EB to DG supply, change over switch for pump change over, including dry run protection.6 nos. of Cast iron lever operated slim seal type butterfly valves of CI body and spheroidal graphite iron disc (SG iron), with nitrile rubber seal, tested to 10kg / sq.cm Confirming to BS 5155 / MF6 standards and including a set of GI flanges as per BS - 10 table1, including bolts, nuts, GI washers and neoprene rubber gaskets complete etc., (Inter valve / Audco make ) on the Supply & delivery side.3 nos. slim seal flap type check valve with CI body and cast steel disc tested to PN - 10kg / sq.cm pressure including a set of GI flanges as per BS - 10 table1 including bolts, nuts, GI washers and neoprene rubber gaskets complete etc., (Inter valve / Audco make) on the delivery side.3 no Y-strainer with CI body and cast steel disc pressure rating PN-10 Kg / sq.cm including a set of GI flanges as per BS-10 table 1 including bolt nuts, GI washers, and neoprene rubber gaskets Complete etc., Suction Side

BILL OF QUANTITIES FOR 57 KLD STP ELECTRO MECHANICAL EQUIPMENTSupplying, installing, testing and commissioning of submersible cutter pumps (one working and one standby) for pumping sewage water from Balancing tank to Baffled Reactor Tank(solid handling capacity should be less than 30mm).The pump shall be coupled to the adequate H.P. electrical motor, mounted on a common base frame. The rate quoted shall be inclusive of: Suitable control panel indoor wall mounting type .Complete set as above ( For Details Refer TEchnical Specification and Tender Booklet)

BILL OF QUANTITIES FOR 57 KLD STP ELECTRO MECHANICAL EQUIPMENTSupplying, installing, testing and commissioning of submersible (one working and one standby) for pumping water from Vortex sump to Vortex systemc .The pump shall be coupled to the adequate H.P. electrical motor, mounted on a common base frame. The rate quoted shall be inclusive of: Suitable control panel indoor wall mounting type . Industrial type electronic liquid level controllers with stainless steel probes / sensors with float switch for automatic operation along with pump logic control ( For Details Refer TEchnical Specification and Tender Booklet)

BILL OF QUANTITIES FOR 57 KLD STP ELECTRO MECHANICAL EQUIPMENTSupplying, installing, testing and commissioning of VORTEX SYSTEM of 60 CM Dia,complete with pedastals, bolt and nuts to fix the Vortex tank etc complete. Flow rate 12m3/Hr. ( For Details Refer TEchnical Specification and Tender Booklet)

BILL OF QUANTITIES FOR 57 KLD STP ELECTRO MECHANICAL EQUIPMENTSupply and fixing Chlorinated Polyvinyl Chloride pipes (CPVC) of SDR 11 as per ASTM D-2846 with all CPVC fittings and specials such as tees, elbows, couplers etc with CPVC brass threaded combination/transition specials such as male adopters brass threaded, female adopters brass threaded, brass FABT tee, brass FABT elbow etc where connection with metal is to be made including cutting holes and chases in walls and floors and refilling it by cement mortar of 1:3 mix (1 Portland Cement : 3 hard settling cement compound) and making good the walls etc as directed by the Engineer in charge. Joints to be made with CPVC solvent as per ASTM F 493 complete.(from Pump outlet to tank, tank to tank overflow, vortex sump to vortex system and vortex system to collection sump inculding inlet and outlet pump manifolds)

BILL OF QUANTITIES FOR 57 KLD STP ELECTRO MECHANICAL EQUIPMENTSupplying, installing, testing and commissioning of submersible (one working and one standby) for pumping water from STP TW sump to Central STP treated water sump .The pump shall be coupled to the adequate H.P. electrical motor, mounted on a common base frame. The rate quoted shall be inclusive of: -- ( For Details Refer TEchnical Specification and Tender Booklet)

BILL OF QUANTITIES FOR 30 KLD STP Supplying, installing, testing and commissioning of submersible cutter pumps (one working and one standby) for pumping sewage water from Balancing tank to Baffled Reactor Tank(solid handling capacity should be less than 30mm).The pump shall be coupled to the adequate H.P. electrical motor, mounted on a common base frame. The rate quoted shall be inclusive of: --- ( For Details Refer TEchnical Specification and Tender Booklet) Complete set as above

BILL OF QUANTITIES FOR 30 KLD STP Supplying, installing, testing and commissioning of submersible (one working and one standby) for pumping water from Vortex sump to Vortex systemc .The pump shall be coupled to the adequate H.P. electrical motor, mounted on a common base frame. The rate quoted shall be inclusive of: Complete set as above - ( For Details Refer TEchnical Specification and Tender Booklet) Complete set as above

BILL OF QUANTITIES FOR 30 KLD STP Supplying, installing, testing and commissioning of VORTEX SYSTEM of 30 CM Dia,complete with pedastals, bolt and nuts to fix the Vortex tank etc complete. Flow rate 7m3/Hr.( For Details Refer TEchnical Specification and Tender Booklet) Complete set as above

BILL OF QUANTITIES FOR 30 KLD STPSupply and fixing Chlorinated Polyvinyl Chloride pipes (CPVC) of SDR 11 as per ASTM D-2846 with all CPVC fittings and specials such as tees, elbows, couplers etc with CPVC brass threaded combination/transition specials such as male adopters brass threaded, female adopters brass threaded, brass FABT tee, brass FABT elbow etc where connection with metal is to be made including cutting holes and chases in walls and floors and refilling it by cement mortar of 1:3 mix (1 Portland Cement : 3 hard settling cement compound) and making good the walls etc as directed by the Engineer in charge. Joints to be made with CPVC solvent as per ASTM F 493 complete.(from Pump outlet to tank, tank to tank overflow, vortex sump to vortex system and vortex system to collection sump inculding inlet and outlet pump manifolds)( For Details Refer TEchnical Specification and Tender Booklet) Complete set as above

BILL OF QUANTITIES FOR 30 KLD STPSupplying, installing, testing and commissioning of submersible (one working and one standby) for pumping water from STP TW sump to Central STP treated water sump .The pump shall be coupled to the adequate H.P. electrical motor, mounted on a common base frame. The rate quoted shall be inclusive of: ( For Details Refer TEchnical Specification and Tender Booklet)

CHILLED WATER PUMPSSupply, erection, testing and commissioning of Single stage centrifugal split case coupled type Verticle INLINE pumpset with axial suction port and discharge port with variable speed drive motor(with Bacnet MS/TP communication protocol), bronze impeller & mechanical seal. The noise level shall be limited to 65 dBA at a distance of 1.5 m, Motors shall be IE-4 and above. Suitable HP,motor shall be TEFC squirrel cage IE4 type(or higher) motors with IP55 protection, having a speed of 1440 rpm ,operating on 415±10% volts, 3 phase ,50 HZ A.C supply. Inertia base, vibration isolation springs, rubber isolation bellows flexible coupling for condenser water circulation. The pump matrix also to be filled up for all vendors.(Insulation for chilled water pumps to be 32mm nitrile rubber of minimum density 36kg/m3, thermal conductivity of 0.032W/mK at 25 Deg C, covered with 500 GSM two layer vapour barrier and covered with 26 G Aluminium cladding). (Inbuilt harmonic filter with standard as per IEEE 519)( Pump to be able to provide flow value on BMS integration)Supply, erection, testing and commissioning of chiller water pump with VFD set capable of delivering 630 USGPM of water against 35.00mtr head each comprising of the following and complete as per specifications and as required ( For Details Refer TEchnical Specification and Tender Booklet) Complete set as above

CONDENSOR WATER PUMPS Supply, erection, testing and commissioning of Single stage centrifugal split case coupled type Verticle INLINE pumpset with axial suction port and discharge port with variable speed drive motor(with Bacnet MS/TP communication protocol), bronze impeller & mechanical seal. The noise level shall be limited to 65 dBA at a distance of 1.5 m, Motor shall be IE-4 and above. Suitable HP,motor shall be TEFC squirrel cage IE4(or higher) type motors with IP55 protection, having a speed of 1440 rpm ,operating on 415±10% volts, 3 phase ,50 HZ A.C supply. Inertia base, vibration isolation springs, rubber isolation bellows flexible coupling for condenser water circulation. The pump matrix also to be filled up for all vendors. (Inbuilt harmonic filter with stadards as per IEEE 519) ( Pump to be able to provide flow value on BMS integration)NOTE : Overall efficiency of the pump including VFD losses to be not less than 70% Supply, erection, testing and commissioning of chiller water pump with VFD set capable of delivering 1050 USGPM of water against 20.00mtr head each comprising of the following and complete as per specifications and as required

PLATE HEAT EXCHANGER PUMPSupply, erection, testing and commissioning of chiller water pump with VFD set capable of delivering 600 USGPM of water against 20.00mtr head each comprising of the following and complete as per specifications and as required ( For Details Refer TEchnical Specification and Tender Booklet) Complete set as above

COOLING TOWERSupply, installation, commissioning & testing of Induced draft cross flow(with Top discharge) with fins proper cleaning if got choke. Design Multi Cell cooling towers with Aluminum alloy aerofoil corrosion resistant fan blades for external use, cooling tower basin,casing to be made from Galvanised steel / fiber reinforced plastic (FRP) with the steel supporting members of the cooling tower to be hot dip galvanized, a steel ladder along with safety railing must be hot dip galvanized from the supporting slab to the top most point of the cooling tower, all fasteners to be hot dip galvanized, the air intake space between the fills & basin to be protected by FRP louvers, The basin (Galvanised steel / FRP material )shall be self-cleaning with drain fittings. The drift eliminators shall be constructed entirely of inert polyvinyl chloride (PVC) in easily handled sections.The isloation valves for drain line, equiliser line, quick fill line, make up line, over flow line and outle valve to be duly considered as per the size mentioned by the OEM. The eliminator design shall incorporate two changes in air direction to assure complete removal of all entrained moisture from the discharge air stream. The fan to be dynamically balanced axial flow type fan-direct driven or driven through reduction gear box with TEFC squirrel cage type induction motor (Efficiency class 1(IE3 & above)with IP 55 protection(Direct Coupling) & motor to be VFD driven as specific, 3 phase 50 Hz & confirming to IP 55 Class F Insulation, earthing shall be included , Minimum Motor efficieny not less than 90%.The structure should be with IBC compliance.Water level control with brass mechanical make up water valve. Cooling Tower with direct driven with statically/dynamically balanced cooling tower low noise fan, consisting of: a) All internals & externals, access ladder. The Access ladder shall be till the base of the terrace level.Capacity 437 TR( For ( For Details Refer TEchnical Specification and Tender Booklet) Complete set as above

PLATE HEAT EXCHANGERSupply, installation, testing & commissioning of Single Pass Plate type Heat Exchanger on a factory fitted fabricated epoxy painted mild steel frame. PHE Capacity is 160TR The units shall withstand the maximum 16bar on either hot or cold side with the opposite side at 0 bar. Units to be factory tested in accordance with PED code.( For Details Refer TEchnical Specification and Tender Booklet) Complete set as above

AIR HANDLING UNIT AND TREATED FRESH AIR UNITSINGLE COIL UNITS - TYPE AActual Capacity at design conditions = (AHU 1 - 22000 Cfm @ 58TR@ total static pressure of 50 mm WG ) ( For Details Refer TEchnical Specification and Tender Booklet)

AIR HANDLING UNIT AND TREATED FRESH AIR UNITSINGLE COIL UNITS - TYPE AActual Capacity at design conditions = (AHU 2 - 12000 Cfm @ 31TR@ total static pressure of 50 mm WG ) ( For Details Refer TEchnical Specification and Tender Booklet)

AIR HANDLING UNIT AND TREATED FRESH AIR UNITSINGLE COIL UNITS - TYPE AActual Capacity at design conditions = (AHU 3 - 19650 Cfm @ 43TR@ total static pressure of 50 mm WG ) ( For Details Refer TEchnical Specification and Tender Booklet)

AIR HANDLING UNIT AND TREATED FRESH AIR UNITSINGLE COIL UNITS - TYPE AActual Capacity at design conditions = (AHU 4 - 17600 Cfm @ 51TR@ total static pressure of 50 mm WG ) ( For Details Refer TEchnical Specification and Tender Booklet)

AIR HANDLING UNIT AND TREATED FRESH AIR UNITSINGLE COIL UNITS - TYPE AActual Capacity at design conditions = (AHU 5 - 19450 Cfm @ 54TR@ total static pressure of 50 mm WG ) ( For Details Refer TEchnical Specification and Tender Booklet)

AIR HANDLING UNIT AND TREATED FRESH AIR UNITSINGLE COIL UNITS - TYPE AActual Capacity at design conditions = (AHU 6 - 15150 Cfm @ 44TR@ total static pressure of 50 mm WG )

AIR HANDLING UNIT AND TREATED FRESH AIR UNITSINGLE COIL UNITS - TYPE AActual Capacity at design conditions = (AHU 2 - 4000 Cfm @ 14TR@ total static pressure of 50 mm WG ) ( For Details Refer TEchnical Specification and Tender Booklet)

AIR HANDLING UNIT AND TREATED FRESH AIR UNITSINGLE COIL UNITS - TYPE AActual Capacity at design conditions = (AHU 3 - 2400 Cfm @ 11TR@ total static pressure of 50 mm WG ) ( For Details Refer TEchnical Specification and Tender Booklet)

SINGLE COIL UNITS - TYPE BSupply, installation, testing & commissioning of Double skin construction draw thru type VERTICLE TYPE Floor Mounted Air handling Units.Actual Capacity at design conditions = (AHU 1 - 6000 Cfm @ 16TR@ total static pressure of 50 mm WG)

Actual Capacity at design conditions = (AHU 2 - 4000 Cfm @ 14TR@ total static pressure of 50 mm WG) ( For Details Refer TEchnical Specification and Tender Booklet)

Actual Capacity at design conditions = (AHU 3 - 3000 Cfm @ 8TR@ total static pressure of 50 mm WG) ( For Details Refer TEchnical Specification and Tender Booklet)

Actual Capacity at design conditions = (AHU 4- 2000 Cfm @ 7TR@ total static pressure of 50 mm WG) ( For Details Refer TEchnical Specification and Tender Booklet)

Actual Capacity at design conditions = (AHU 1 - 10800 Cfm @ 25TR@ total static pressure of 50 mm WG) ( For Details Refer TEchnical Specification and Tender Booklet)

Actual Capacity at design conditions = (AHU 2 - 7150 Cfm @ 15TR@ total static pressure of 50 mm WG) ( For Details Refer TEchnical Specification and Tender Booklet)

Actual Capacity at design conditions = (AHU 3 - 3700 Cfm @ 9TR@ total static pressure of 50 mm WG) ( For Details Refer TEchnical Specification and Tender Booklet)

Actual Capacity at design conditions = (AHU 4 - 7300 Cfm @ 14TR@ total static pressure of 50 mm WG) ( For Details Refer TEchnical Specification and Tender Booklet)

Actual Capacity at design conditions = (AHU 5 - 5700 Cfm @ 14TR@ total static pressure of 50 mm WG) ( For Details Refer TEchnical Specification and Tender Booklet)

Actual Capacity at design conditions = (AHU 6 - 7600 Cfm @ 17TR@ total static pressure of 50 mm WG) ( For Details Refer TEchnical Specification and Tender Booklet)

Actual Capacity at design conditions = (AHU 1 - 14000Cfm @ 37TR@ total static pressure of 50 mm WG) ( For Details Refer TEchnical Specification and Tender Booklet)

Actual Capacity at design conditions = (AHU 2 -11000 Cfm @ 27TR@ total static pressure of 50 mm WG) ( For Details Refer TEchnical Specification and Tender Booklet)

SINGLE COIL UNITS WITH INDIRECT DIRECT EVAPORATIVE COOLING - TYPE CSupply, installation, testing & commissioning of Double skin construction draw thru type Floor Mounted Air handling Units.wall panels shall be fixed to 3mm thick, hollow extruded alunimium profile with polyamide thermal break profile joined by 3D extruded alumnium chamfered corners, forming the structural frame work to house all internal components. The panels shall be of 0.8mm thick GSS sheet pre plasticised finish on the outer side and pre coated finish on the inner side of the unit. Panels should have complete with Glass view panel, motor guard, marine light, cable entry, drain connection at both ends. 18G SS drain tray insulated externally with 19mm nitrile rubber. AHU frame work shall be of extruded aluminium profile with three way corner frame sections.Casing of the unit shall comply to eurovent EN 1886 with casing strength D1 type, casing leakage L1, Filter bypass leakage F8, Thermal bridging factor TB2 and air handling performance as per EN 13053. The air leakage through ahu casing shall not exceed specified limits while tested as per class B of DW 143 standard.Actual Capacity at design conditions = (AHU 1 - 11000 Cfm @ 30TR@ total static pressure of 60 mm WG ) ( For Details Refer TEchnical Specification and Tender Booklet)

Actual Capacity at design conditions = (AHU 2 - 7400 Cfm @ 20TR@ total static pressure of 60 mm WG ) ( For Details Refer TEchnical Specification and Tender Booklet)

INDIRECT DIRECT EVAPORATIVE COOLING - TYPE DSupply, installation, testing & commissioning of Double skin construction draw thru type Floor Mounted Air handling Units.sheet pre plasticised finish on the outer side and pre coated finish on the inner side of the unit. Panels should have complete with Glass view panel, motor guard, marine light, cable entry, drain connection at both ends. 18G SS drain tray insulated externally with 19mm nitrile rubber. unit frame work shall be of extruded aluminium profile with three way corner frame sections.Casing of the unit shall comply to eurovent EN 1886 or equivalent with casing strength D1 type( or equivalent), casing leakage L1( or equivalent). The air leakage through ahu casing shall not exceed specified limits while tested as per class B of DW 143 standard ( or equivalent).Actual Capacity at design conditions = (IDEC 1 - 16000 CFM @ 60 mm Static)( For Details Refer TEchnical Specification and Tender Booklet)

Actual Capacity at design conditions = (IDEC 2 -19000 CFM @ 60 mm Static ) ( For Details Refer TEchnical Specification and Tender Booklet)

Actual Capacity at design conditions = (AHU 2 - 7500 Cfm @ 42TR@ total static pressure of 50 mm WG ) ( For Details Refer TEchnical Specification and Tender Booklet)

Supply, installation, testing & commissioning of Double skin construction draw thru type Ceiling Mounted Air handling Units.(TYPE E UNIT)Casing: - CSU shall be modular type with pentapost frame. Unit shall be Double skin with 40+/-2 mm thick PUF / PIR type CFC free insulation sandwiched between the panels. The insulation shall be injected such that the density remains constant throughtout the panels. Double skin wall panels shall be fixed to 3mm thick, hollow extruded alunimium profile with polyamide thermal break profile joined by 3D extruded alumnium chamfered corners, forming the structural frame work to house all internal components. The panels shall be of 0.8mm thick GSS sheet pre plasticised finish on the outer side and pre coated finish on the inner side of the unit. Panels should have complete with Glass view panel, motor guard, marine light, cable entry, drain connection at both ends. 18G SS drain tray insulated externally with 19mm nitrile rubber.Casing of the unit shall comply to eurovent EN 1886 with casing strength D1 type, casing leakage L1, Filter bypass leakage F8, Thermal bridging factor TB2 and air handling performance as per EN 13053. The air leakage through ahu casing shall not exceed specified limits while tested as per class B of DW 143 standard.Actual Capacity at design conditions = (CSU 7 - 700cfm @ 2TR@ total static pressure of 35 mm WG) ( For Details Refer TEchnical Specification and Tender Booklet)

Actual Capacity at design conditions = (CSU 1 - 1350 cfm @ 3TR@ total static pressure of 35 mm WG) ( For Details Refer TEchnical Specification and Tender Booklet)

Actual Capacity at design conditions = (CSU 2 - 3500 cfm @ 8TR@ total static pressure of 35 mm WG) ( For Details Refer TEchnical Specification and Tender Booklet)

Actual Capacity at design conditions = (CSU 3 - 3600 cfm @ 7TR@ total static pressure of 35 mm WG) ( For Details Refer TEchnical Specification and Tender Booklet)

Actual Capacity at design conditions = (CSU 4 - 2300 cfm @ 6.5TR@ total static pressure of 35 mm WG) ( For Details Refer TEchnical Specification and Tender Booklet)

Actual Capacity at design conditions = (CSU 5 - 2200 cfm @ 6TR@ total static pressure of 35 mm WG)

Actual Capacity at design conditions = (CSU 6 - 1400 cfm @ 4TR@ total static pressure of 35 mm WG) ( For Details Refer TEchnical Specification and Tender Booklet)

Actual Capacity at design conditions = (CSU 7 - 2400cfm @ 7TR@ total static pressure of 35 mm WG) ( For Details Refer TEchnical Specification and Tender Booklet)

Actual Capacity at design conditions = (CSU 1 -2000 cfm @ 6TR@ total static pressure of 35 mm WG)

Actual Capacity at design conditions = (CSU 2 - 2200 cfm @ 6TR@ total static pressure of 35 mm WG) ( For Details Refer TEchnical Specification and Tender Booklet)

Actual Capacity at design conditions = (CSU 3 - 3000 cfm @ 9TR@ total static pressure of 35 mm WG) ( For Details Refer TEchnical Specification and Tender Booklet)

INDIRECT EVAPORATIVE COOLING - TYPE FSupply, installation, testing & commissioning of Double skin construction draw thru type Floor Mounted Air handling Units.Casing: - AHU shall be modular type with pentapost frame. Unit shall be Double skin with 46 +/- 2 mm thick PUF / PIR type CFC free insulation sandwiched between the panels. The insulation shall be injected such that the density remains constant throughtout the panels. Double skin wall panels shall be fixed to 3mm thick, hollow extruded alunimium profile with polyamide thermal break profile joined by 3D extruded alumnium chamfered corners, forming the structural frame work to house all internal components. The panels shall be of 0.8mm thick GSS sheet pre plasticised finish on the outer side and pre coated finish on the inner side of the unit. Panels should have complete with Glass view panel, motor guard, marine light, cable entry, drain connection at both ends. 18G SS drain tray insulated externally with 19mm nitrile rubber. AHU frame work shall be of extruded aluminium profile with three way corner frame sections.Casing of the unit shall comply to eurovent EN 1886 with casing strength D1 type, casing leakage L1, Filter bypass leakage F8, Thermal bridging factor TB2 and air handling performance as per EN 13053. The air leakage through ahu casing shall not exceed specified limits while tested as per class B of DW 143 standard.Actual Capacity at design conditions = (TFA 1 - 3300 Cfm @ total static pressure of 40 mm WG ) ( For Details Refer TEchnical Specification and Tender Booklet)

Actual Capacity at design conditions = (TFA 1 - 3300 Cfm @ total static pressure of 40 mm WG ) ( For Details Refer TEchnical Specification and Tender Booklet)

Actual Capacity at design conditions = (TFA 2 - 2400 Cfm @ total static pressure of 40 mm WG ) ( For Details Refer TEchnical Specification and Tender Booklet)

Actual Capacity at design conditions = (TFA 3- 1200 Cfm @ total static pressure of 40 mm WG ) ( For Details Refer TEchnical Specification and Tender Booklet)

Actual Capacity at design conditions = (TFA 1 - 4400 Cfm @ total static pressure of 40 mm WG ) ( For Details Refer TEchnical Specification and Tender Booklet)

Application - EXHAUST-Supply, installation, testing & commissioning of Outdoor application Double skin construction draw thru type Floor Mounted Exhaust fan.Casing: - Unit shall be modular type with pentapost frame. Unit shall be Double skin with 25 +/- 2 mm thick PUF / PIR type CFC free insulation sandwiched between the panels. The insulation shall be injected such that the density remains constant throughtout the panels. Double skin wall panels shall be fixed to 3mm thick, joined by 3D extruded alumnium chamfered corners, forming the structural frame work to house all internal components. The panels shall be of 0.8mm thick GSS sheet pre plasticised finish on the outer side and pre coated finish on the inner side of the unit. Panels should have complete with Glass view panel, motor guard, marine light, cable entry. Unit frame work shall be of extruded aluminium profile with three way corner frame sections.Casing of the unit shall comply to eurovent EN 1886 with casing strength D1 type, casing leakage L1 and air handling performance as per EN 13053. The air leakage through ahu casing shall not exceed specified limits while tested as per class B of DW 143 standard.11,000 Cfm and a static pressure of 25 mm WG ( For Details Refer TEchnical Specification and Tender Booklet)

9000 Cfm and a static pressure of 30 mm WG ( For Details Refer TEchnical Specification and Tender Booklet)

7400 Cfm and a static pressure of 25 mm WG ( For Details Refer TEchnical Specification and Tender Booklet)

3750 Cfm and a static pressure of 30 mm WG ( For Details Refer TEchnical Specification and Tender Booklet)

4400 Cfm and a static pressure of 40 mm WG ( For Details Refer TEchnical Specification and Tender Booklet)

3600 Cfm and a static pressure of 40 mm WG ( For Details Refer TEchnical Specification and Tender Booklet)

SApplication - FRESH AIRupply, installation, testing & commissioning of Outdoor application Double skin construction draw thru type Floor Mounted FRESH Air fan.Casing: - Unit shall be modular type with pentapost frame. Unit shall be Double skin with 25 +/- 2 mm thick PUF / PIR type CFC free insulation sandwiched between the panels. The insulation shall be injected such that the density remains constant throughtout the panels. Double skin wall panels shall be fixed to 3mm thick, joined by 3D extruded alumnium chamfered corners, forming the structural frame work to house all internal components. The panels shall be of 0.8mm thick GSS sheet pre plasticised finish on the outer side and pre coated finish on the inner side of the unit. Panels should have complete with Glass view panel, motor guard, marine light, cable entry. Unit frame work shall be of extruded aluminium profile with three way corner frame sections.Casing of the unit shall comply to eurovent EN 1886 with casing strength D1 type, casing leakage L1 and air handling performance as per EN 13053. The air leakage through ahu casing shall not exceed specified limits while tested as per class B of DW 143 standard.1800 Cfm and a static pressure of 40 mm WG ( For Details Refer TEchnical Specification and Tender Booklet)

FAN COIL UNIT-Supply, Installation, testing and commissioning of blow-through type Chilled Water Fan Coil unit complete with insulated drain pan, cooling coil, centrifugal fan, copper pipe connection, 20mm brass body ball valve with and without Y strainer and solenoid valve Concealed type Horizontal Ceiling suspended FCU, with 3/4 row coil, suitable for below design conditions. FCUs should be with option of witness testing should be available. FCUs should be with proper coil design, multi-speed fan motor (preferably more than 3 fan speeds), high quality insulated metallic drain trays (main and extended), ultra low noise design (not more than 35 dB(A) . Units shall be provided with a factory fitted valve station, leak tested for performance. FCUs should be Eurovent Certified and high efficiency design motors. Coil design of the FCU should confirm to below required site conditions:The cost shall include thermostat with digital setting of temperature, electrical & speed control wiring etc. of following capacities. FCU wiring should be connected to Keytag(Once the Key card is removed from the tag / socket the AC will be off and only the FCU fan will run for fresh air). ESP to be not less than 30Pa.Air flow rates to be not less than 300 cfm per TR-( For Details Refer TEchnical Specification and Tender Booklet)- 2TR

1.5TR ( For Details Refer TEchnical Specification and Tender Booklet)

0.8TR ( For Details Refer TEchnical Specification and Tender Booklet)

HIGH WALL UNIT -Supply, installation, testing & commissioning of Chilled Water HI WALL Unit with Fan, Motor with three speed control, CHW cooling Coil ,Filter , additional insulated drip tray, with necessary supporting arrangement, controls, decorative panel, power wiring from nearest power socket to indoor unit control wiring from indoor ,to temperature sensor & CHW Valve, ball valve for outlet, ball valve with strainer for inlet & 2 Way control valve with ON/OFF actuator .Cordless remote, control cables etc.. (Drain pump to be provided). Units shall be provided with a factory fitted valve station, leak tested for performance. FCUs should be Eurovent Certified and high efficiency design motors. Coil design of the FCU should confirm to below required site conditions. The unit shall be equiped with BMS interface control module for controling the Hi-Wall unit. In built integration card with inbuilt Thermostat.The unit circuit should be able to integrate with respect to the ON/OFF valve. ESP to be not less than 20Pa. ( For Details Refer TEchnical Specification and Tender Booklet)-1.5TR

1TR ( For Details Refer TEchnical Specification and Tender Booklet)

Application - PRESSURIZATIONSupply, installation, testing & commissioning of AMCA Certified TUBE AXIAL FANS with galvanized steel Double flanged long casing, impellers of pressure casted aluminum adjustable pitch blades as per the specification. The fan shall be min IP 55 protection with direct driven motor and the air flowing from impeller to the motor for Lift lobby, Lift Well & staircase pressurization application as per specification & as indicated in the Equipment Schedule. Motor shall be suitable for 415±10% volts, 50 cycles/second, 3 phase AC supply. Each fan shall include all accessories, controls, Flexible connection, vibration isolators, necessary supports as per the specification. The Motor shall be CLASS-H insulation. The fan and motor to have efficiency not less than 70%.( For Details Refer TEchnical Specification and Tender Booklet)- 6000 Cfm and a static pressure of 40 mm WG

6500 Cfm and a static pressure of 40 mm WG( For Details Refer TEchnical Specification and Tender Booklet)

5500 Cfm and a static pressure of 40 mm WG ( For Details Refer TEchnical Specification and Tender Booklet)

5000 Cfm and a static pressure of 40 mm WG ( For Details Refer TEchnical Specification and Tender Booklet)

11000 Cfm and a static pressure of 40 mm WG ( For Details Refer TEchnical Specification and Tender Booklet)

3400 Cfm and a static pressure of 40 mm WG ( For Details Refer TEchnical Specification and Tender Booklet)

7000 Cfm and a static pressure of 40 mm WG ( For Details Refer TEchnical Specification and Tender Booklet)

7500 Cfm and a static pressure of 40 mm WG ( For Details Refer TEchnical Specification and Tender Booklet)

13000 Cfm and a static pressure of 40 mm WG ( For Details Refer TEchnical Specification and Tender Booklet)

8000 Cfm and a static pressure of 40 mm WG ( For Details Refer TEchnical Specification and Tender Booklet)

PHE PUMP ROOM VENTILATION FANS-Supply, Installation, testing and commissioning of AMCA Certified ( AMCA seal for Fan Efficiency Grade & all the Axial flow fans shall be AMCA Certified for Sound & Air performance sound level should be with in 60 - 80 dBa) Direct driven Axial fans shall be complete with casing made of Galvanized steel. Motors Shall be in airstream and as per IEC design, As standard, motors shall be Inverter Duty Rated, with IP55 degree of enclosure and Class 'F' insulation, impeller with manually adjustable aluminum alloy airfoil blades for more than 500mm impeller diameter. Motor shall be suitable for 415+10% volts, 50 cycles , 3 phase AC supply.Minimum fan efficieicy should not be less than 60%.Relay model for BMS compatability to be considered. Note:Star delta starter for each motor, with required motor protection with MPCB and OLR, single VFD with By-pass agreement this to be read along with SLD, BMS and fire integration provision to be considered For Details Refer TEchnical Specification and Tender Booklet) - 4500 Cfm and a static pressure of 20 mm WG ( For Details Refer Technical Specification and Tender Booklet)

PIPES, VALVES & INSULATION(CHILLED WATER) (Riser Pipes + Internal building pipes)Supply, Installation, Testing & Commissioning of chilled water piping of MS 'C' Class material following sizes conforming to IS : 1239(Part 1)/ IS 3589 with necessary clamps, vibration isolators and black steel pipes joints & fittings such as bends, tees, MS Supports, PUFF blocks,nuts,bolts Support hangers with vibration isolation arrangement etc , (Pressure Rating PN 16). Only End flanges to be used for capping of pipes. The chiller water piping shall be with Corrosion Resistant Epoxy (FRP) Protective Coating. duly painted as per specification and as required. and MS C Class Type Piping insulation with Electron beam crosslinked polyolefin foam insulation with vapour barrier,with 9 micron Reinforced aluminium, thermal conductivity of 0.032W/mk at 25 Deg C, compiled Class 'O' fire rating standard as per specifications(Density to be not more than 25kg/m3) as follows: (Note : Flanges for pipe connection details to be considered as per is :1536 ). All the details to be confirming to specifications (For Details Refer Technical Specification and Tender Booklet) 25 mm dia with 25 mm thick insulation

32 mm dia with 25 mm thick insulation (For Details Refer Technical Specification and Tender Booklet)

40 mm dia with 32 mm thick insulation(For Details Refer Technical Specification and Tender Booklet)

50 mm dia with 32 mm thick insulation(For Details Refer Technical Specification and Tender Booklet)

65 mm dia with 32 mm thick insulation(For Details Refer Technical Specification and Tender Booklet)

80 mm dia with 32 mm thick insulation(For Details Refer Technical Specification and Tender Booklet)

100 mm dia with 32 mm thick insulation(For Details Refer Technical Specification and Tender Booklet)

125 mm dia with 32 mm thick insulation(For Details Refer Technical Specification and Tender Booklet)

150 mm dia with 32 mm thick insulation(For Details Refer Technical Specification and Tender Booklet)

200 mm dia with 32 mm thick insulation(For Details Refer Technical Specification and Tender Booklet)

250 mm dia with 32 mm thick insulation(For Details Refer Technical Specification and Tender Booklet)

300 mm dia with 32 mm thick insulation(For Details Refer Technical Specification and Tender Booklet)

50 mm dia with 32 mm thick insulation (For Details Refer Technical Specification and Tender Booklet)

65 mm dia with 32 mm thick insulation (For Details Refer Technical Specification and Tender Booklet)

80 mm dia with 32 mm thick insulation (For Details Refer Technical Specification and Tender Booklet)

100 mm dia with 32 mm thick insulation (For Details Refer Technical Specification and Tender Booklet)

125 mm dia with 32 mm thick insulation (For Details Refer Technical Specification and Tender Booklet)

150 mm dia with 32 mm thick insulation (For Details Refer Technical Specification and Tender Booklet)

200 mm dia with 32 mm thick insulation (For Details Refer Technical Specification and Tender Booklet)

Supply, installation, testing & commissioning of AUTOMATED BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & P N 16 pressure rating for chilled / hot water circulation as specified.(For Details Refer Technical Specification and Tender Booklet) - 40 mm dia with 32 mm thick insulation

40 mm dia with 32 mm thick insulation (For Details Refer Technical Specification and Tender Booklet)

50 mm dia with 32 mm thick insulation (For Details Refer Technical Specification and Tender Booklet)

200 mm dia with 50 mm thick insulation (For Details Refer Technical Specification and Tender Booklet)

Supply, installation, testing & commissioning of MANUAL BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as specified. (For Details Refer Technical Specification and Tender Booklet) 32 mm dia with 25 mm thick insulation

Supply, installation, testing & commissioning of Flanged type "Y" Strainer (PN 16) (with counter flanges) for pumps duly insulated as per above spec.and with edge neatly folded and screwed. The cap portion of the strainer should have openable cover, to prevent damage to the insulation during servicing,it should have SS /Bronze screen along with valve. (Strainer to have ball valve for drain & body ductile iron)(For Details Refer Technical Specification and Tender Booklet) 25 mm dia with 32 mm thick insulation

32 mm dia with 32 mm thick insulation (For Details Refer Technical Specification and Tender Booklet)

40 mm dia with 32 mm thick insulation (For Details Refer Technical Specification and Tender Booklet)

50 mm dia with 32 mm thick insulation (For Details Refer Technical Specification and Tender Booklet)

65 mm dia with 32 mm thick insulation (For Details Refer Technical Specification and Tender Booklet)

80 mm dia with 32 mm thick insulation (For Details Refer Technical Specification and Tender Booklet)

100 mm dia with 32 mm thick insulation (For Details Refer Technical Specification and Tender Booklet)

125 mm dia with 32 mm thick insulation (For Details Refer Technical Specification and Tender Booklet)

Supply, Installation, Testing and Commissioning of following sizes electronic, self-balancing, pressure independent type dynamic balancing valve with integrated 2 way modualating control valve in a single body. The actuator shall be capable of accepting upto 10V DC and upto 20mA electric signal and shall provide similar transduced feedback output to control system. Maximum close off pressure shall not be less than 6 Bar for upto 50 mm valves and 7 Bar for 65 mm & above. Valves should have pressure rating of 25 Bar minimum.Pressure rating of PN 16 valves.(For Details Refer Technical Specification and Tender Booklet) 25 mm dia with 25 mm thick insulation

32 mm dia with 25 mm thick insulation (For Details Refer Technical Specification and Tender Booklet)

40 mm dia with 32 mm thick insulation (For Details Refer Technical Specification and Tender Booklet)

50 mm dia with 32 mm thick insulation (For Details Refer Technical Specification and Tender Booklet)

65 mm dia with 32 mm thick insulation (For Details Refer Technical Specification and Tender Booklet)

80 mm dia with 32 mm thick insulation (For Details Refer Technical Specification and Tender Booklet)

100 mm dia with 32 mm thick insulation (For Details Refer Technical Specification and Tender Booklet)

Supply, installation, testing and Commissioning of 150 mm dia dial type pressure gauge in the chilled water lines with glycerin filled brass ball valve of suitable dia and SS tubing & socket having range (0-10 bar)/(0-150 psi) as required., and complete as per specification.(For Details Refer Technical Specification and Tender Booklet)

Providing & fixing in position the mercury in glass industrial type thermometers.(For Details Refer Technical Specification and Tender Booklet)

Supply, Installation, testing & commissioning of Ball valves with rating PN 16 & insulation as per above(For Details Refer Technical Specification and Tender Booklet) - 25 mm dia with 25 mm thick insulation

Supply, Installation, testing & commissioning of Ball valves with rating PN 16 & insulation as per above(For Details Refer Technical Specification and Tender Booklet) -32 mm dia with 25 mm thick insulation

Supply, installation testing & commissioning of Brass Automatic air vent to be provided at all high location of piping, Plant room headers and vertical, external & Internal headers. The air vent to be provided with necessary ball valve. The air vent to be connected with necessary drain pipe and left to the nearest waste drain point / pipe for the chilled water lines as per the Drawing.(For Details Refer Technical Specification and Tender Booklet)

Supply, installation testing & commissioning of Brass Manual air vent to be provided at all high location of piping, Plant room headers and vertical, external & Internal headers. The air vent to be provided with necessary ball valve. The air vent to be connected with necessary drain pipe and left to the nearest waste drain point / pipe for the chilled water lines as per the Drawing.(For Details Refer Technical Specification and Tender Booklet)

Supply, installation testing & commissioning of 12 mm Test points made of all steel construction, unit shall also include sealant for complete enclosure. These pressure and temperature test points shall comprise a welded socket, into which shall be screwed a selfsealing test plug, with removable cap. (For Details Refer Technical Specification and Tender Booklet)

Provision & installation of Thermowells across chilled water lines and its respective finishing as per consultant instructions (For Details Refer Technical Specification and Tender Booklet)

Supply, installation testing & commissioning of SS Drain cock 20mm dia (With Dead Plugs).The Drain to be connected with necessary drain pipe and left to the nearest waste drain point. (For Details Refer Technical Specification and Tender Booklet)

PIPES, VALVES & INSULATION(CHILLED WATER) (Plant room & Entry exit)-Supply, Installation, Testing & Commissioning of Chilled water piping of following nominal sizes MS heavy 'C' Class piping conforming to IS : 1239(Part 1)/ IS 3589 with necessary clamps, vibration isolators and black steel pipes joints & fittings, (excluding valves, strainers, guages etc)and adequately supported on rigid factory made supports.Only End flanges to be used for capping of pipes. Pipes to be covered with plastic cap on both ends to prevent entry of soil. The chilled water piping shall be with Corrosion Resistant Epoxy (FRP) Protective Coating and duly insulated with rigid polyurethane foam of minimum density 32 kg/m3, thermal conductivity of 0.023W/mK at 25 Deg C, covered with 500 GSM two layer vapour barrier and covered with 24G Aluminium cladding. Necessary pipe supports to be provided as per the specifications with vapour barrier, complied O fire rating standard.(For Details Refer Technical Specification and Tender Booklet) 150 mm dia with 50 mm thick insulation

200 mm dia with 50 mm thick insulation (For Details Refer Technical Specification and Tender Booklet)

500 mm dia with 50 mm thick insulation (For Details Refer Technical Specification and Tender Booklet)

PLANT ROOM VALVES-All Plant room valves/fittings insulation are with 32mm nitrile rubber of minimum density 36kg/m3, thermal conductivity of 0.032W/mK at 25 Deg C, covered with 500 GSM two layer vapour barrier and covered with 26 G Aluminium cladding. Insulation joints to be sealed using 3mm self adhesive aluminium tape specified by the manufacturer. Necessary supports to be provided as per the specifications, complied O fire rating standard. Supply, Installation, testing & commissioning of Butterfly valves with handle and gear type of made of C.S /M.S painted with Fusion Bonded Epoxy(FBE) with 200 microns. Body of C.S / D.I with FBE or Acrylic painter for AL, Bearing with Bronze of graphite inner coating or PTFE without any coat. Seal ring with EPDM and steam of SS316,Disc with SS316.The arrangement of disc and body as to be vulcanized.BFV should have matching flanges with hot dipped galvanized bolts and nuts.Rating PN 16 & insulation as per above (For Details Refer Technical Specification and Tender Booklet) 200 mm dia with 50 mm thick insulation

500 mm dia with 50 mm thick insulation (For Details Refer Technical Specification and Tender Booklet)

Supply, installation, testing & commissioning of Flanged type "Y" Strainer (PN 16) (with counter flanges) for pumps duly insulated as per above spec.and with edge neatly folded and screwed. The cap portion of the strainer should have openable cover, to prevent damage to the insulation during servicing,it should have SS /Bronze screen along with valve. Make: Sant, (Strainer to have ball valve for drain & body ductile iron)(For Details Refer Technical Specification and Tender Booklet) 200 mm dia with 50 mm thick insulation

Supply, installation, testing and commissioning of Ball Type check valves with CI body cover, Nitrile rubber coated ball and vertical installation with insulation and Pressure rating of PN 16 in position complete with flanges, bolts, nuts gaskets etc and conforming to specifications with insulation as given above.(For Details Refer Technical Specification and Tender Booklet) 200 mm dia with 50 mm thick insulation

Supply, installation, testing and commissioning of Motorised modulating type Globe valve operated based on DP sensor/BTU meter feedback with Pressure rating of PN 16 & insulation as per specifications. It shall have complete actuator interchangeability, allowing easy field retrofit or mounting using standardized mounting kits, Should fallow ANSI class 250(PSIG) standard & Factory tested.(For Details Refer Technical Specification and Tender Booklet) 200 mm dia

Supply, Installation, testing & commissioning of 2 way Motorised BFV ON/ OFF type complete with Actuator with required torque (will confirm on technical spec given by supplier), transformer (240 /24V), inbuilt controller, matching flanges etc., The valves should have feasibility of changing the inner lining if wornout. The valves actuator shall be complete with necessary inbuilt limit switches for OPEN/CLOSE status feedback to BMS.(IP 65 protection) handle and gear type of extended stem made of C.S /M.S painted with Fusion Bonded Epoxy(FBE) with 200 microns. Body of C.S / D.I with FBE or Acrylic painter for AL, Bearing with Bronze of graphite inner coating or PTFE without any coat. Seal ring with EPDM and steam of SS316,Disc with SS316.The arrangement of disc and body as to be vulcanized.BFV should have matching flanges with hot dipped galvanized bolts,nuts and washers.Rating PN 16. The rest of the details to be as per specs.(For Details Refer Technical Specification and Tender Booklet) 200 mm dia

Supply, Installation, testing and Commissioning of UV Type upto DN 60 & Electro magnetic type from DN 80 and above Flowmeters complete with control wiring in the chilled water lines conforming to specification.(For Details Refer Technical Specification and Tender Booklet) 200 mm dia or Max. 630 US GPM

Supply, installation testing & commissioning of Brass Automatic air vent to be provided at all high location of piping, Plant room headers and vertical, external & Internal headers. The air vent to be provided with necessary ball valve. The air vent to be connected with necessary drain pipe and left to the nearest waste drain point / pipe for the chilled water lines as per the Drawing.For Details Refer Technical Specification and Tender Booklet)

Supply, installation testing & commissioning of Brass Manual air vent to be provided at all high location of piping, Plant room headers and vertical, external & Internal headers. The air vent to be provided with necessary ball valve. The air vent to be connected with necessary drain pipe and left to the nearest waste drain point / pipe for the chilled water lines as per the Drawing.(For Details Refer Technical Specification and Tender Booklet)

Supply, installation testing & commissioning of 12 mm Test points made of all steel construction, unit shall also include sealant for complete enclosure. These pressure and temperature test points shall comprise a welded socket, into which shall be screwed a selfsealing test plug, with removable cap.(For Details Refer Technical Specification and Tender Booklet)

Provision & installation of water DPT's across chilled water lines and its respective finishing as per consultant instructions (For Details Refer Technical Specification and Tender Booklet)

Provision & installation of Thermowells across chilled water lines and its respective finishing as per consultant instructions (For Details Refer Technical Specification and Tender Booklet)

Supply, installation testing & commissioning of SS Drain cock 32 mm & 40mm dia (With Dead Plugs).The Drain to be connected with necessary drain pipe and left to the nearest waste drain point. (For Details Refer Technical Specification and Tender Booklet)

Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required (For Details Refer Technical Specification and Tender Booklet)

Providing & fixing in position the mercury in glass industrial type thermometers. (For Details Refer Technical Specification and Tender Booklet)

Master Plan - Quantites-Pre-Insulated Pipes - MS(Master plan)-Supply, Installation, Testing & Commissioning of Pre-insulated Seamless Chilled water piping of following nominal sizes MS heavy 'C' Class piping conforming to IS : 1239(Part 1)/ IS 3589 with necessary clamps and black steel pipes, joints,necessary fittings, etc .Only End flanges to be used for capping of pipes. Pipes shall be conforming to PN 20 pressure rating. The entire buried pipes should be properly laid with RCC pedastals(under civil scope) and puff saddles to be used accordingly. Puff saddles intervals to be as per preinsulated OEM standards. (Note : Flanges for pipe connection details to be considered as per IS :1536 ). Wall thickness shall be as per IS 1239 upto dia 300mm, from 301 mm to 400 mm it shall be 6mm and for pipes above 401 mm it shall be 6.5mm dia.Dia mentioned below are ID(For Details Refer Technical Specification and Tender Booklet) 50 mm dia

80 mm dia (For Details Refer Technical Specification and Tender Booklet)

100 mm dia (For Details Refer Technical Specification and Tender Booklet)

125 mm dia (For Details Refer Technical Specification and Tender Booklet)

150 mm dia For Details Refer Technical Specification and Tender Booklet)

200 mm dia (For Details Refer Technical Specification and Tender Booklet)

250 mm dia For Details Refer Technical Specification and Tender Booklet)

300 mm dia (For Details Refer Technical Specification and Tender Booklet)

350 mm dia (For Details Refer Technical Specification and Tender Booklet)

450 mm dia (For Details Refer Technical Specification and Tender Booklet)

500 mm dia (For Details Refer Technical Specification and Tender Booklet)

Excavating hard murum / metal road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete.(For Details Refer Technical Specification and Tender Booklet)

Supply, Installation, testing & commissioning of Butterfly valves with handle and gear type of made of C.S /M.S painted with Fusion Bonded Epoxy(FBE) with 200 microns. Body of C.S / D.I with FBE or Acrylic painter for AL, Bearing with Bronze of graphite inner coating or PTFE without any coat. Seal ring with EPDM and steam of SS316,Disc with SS316.The arrangement of disc and body as to be vulcanized.BFV should have matching flanges with hot dipped galvanized bolts and nuts.Rating PN 16 & insulation as per above. Extended stem chamber at 1.5 mts.(Extended stem to be SS type to avoid Sweating).(For Details Refer Technical Specification and Tender Booklet) 350 mm dia with 50 mm thick insulation

200 mm dia with 32 mm thick insulation (For Details Refer Technical Specification and Tender Booklet)

125 mm dia with 32 mm thick insulation (For Details Refer Technical Specification and Tender Booklet)

80 mm dia with 32 mm thick insulation (For Details Refer Technical Specification and Tender Booklet)

Supply, Installation, testing & commissioning of Motorized Modulating BFV type complete with Actuator with required torque (will confirm on technical spec given by supplier), transformer (240 /24V), inbuilt controller, matching flanges etc., The valves should have feasibility of changing the inner lining if wornout. The valves actuator shall be complete with necessary inbuilt limit switches for OPEN/CLOSE status feedback to BMS.(IP 65 protection) handle and gear type of extended stem made of C.S /M.S painted with Fusion Bonded Epoxy(FBE) with 200 microns. Body of C.S / D.I with FBE or Acrylic painter for AL, Bearing with Bronze of graphite inner coating or PTFE without any coat. Seal ring with EPDM and steam of SS316,Disc with SS316.The arrangement of disc and body as to be vulcanized.BFV should have matching flanges with hot dipped galvanized bolts,nuts and washers.Rating PN 16. The rest of the details to be as per specs.(For Details Refer Technical Specification and Tender Booklet) 100 mm dia

200 mm dia For Details Refer Technical Specification and Tender Booklet)

Supply, Installation, testing & commissioning of 2 way Motorised BFV ON/ OFF type complete with Actuator with required torque (will confirm on technical spec given by supplier), transformer (240 /24V), inbuilt controller, matching flanges etc., The valves should have feasibility of changing the inner lining if wornout. The valves actuator shall be complete with necessary inbuilt limit switches for OPEN/CLOSE status feedback to BMS.(IP 65 protection) handle and gear type of extended stem made of C.S /M.S painted with Fusion Bonded Epoxy(FBE) with 200 microns. Body of C.S / D.I with FBE or Acrylic painter for AL, Bearing with Bronze of graphite inner coating or PTFE without any coat. Seal ring with EPDM and steam of SS316,Disc with SS316.The arrangement of disc and body as to be vulcanized.BFV should have matching flanges with hot dipped galvanized bolts,nuts and washers.Rating PN 16. The rest of the details to be as per specs. For Details Refer Technical Specification and Tender Booklet) 50 mm dia

100 mm dia (For Details Refer Technical Specification and Tender Booklet)

125 mm dia (For Details Refer Technical Specification and Tender Booklet)

200 mm dia (For Details Refer Technical Specification and Tender Booklet)

250 mm dia (For Details Refer Technical Specification and Tender Booklet)

Supply, installation testing & commissioning of AUTOMATED BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as specified.(For Details Refer Technical Specification and Tender Booklet) 100 mm dia

200 mm dia (For Details Refer Technical Specification and Tender Booklet)

250 mm dia (For Details Refer Technical Specification and Tender Booklet)

300 mm dia (For Details Refer Technical Specification and Tender Booklet)

350 mm dia (For Details Refer Technical Specification and Tender Booklet)

450 mm dia (For Details Refer Technical Specification and Tender Booklet)

Supply, installation testing & commissioning of Brass Automatic air vent to be provided at all high location of piping, Plant room headers and vertical, external & Internal headers. The air vent to be provided with necessary ball valve. The air vent to be connected with necessary drain pipe and left to the nearest waste drain point / pipe for the chilled water lines as per the Drawing. (For Details Refer Technical Specification and Tender Booklet)

Supply, installation testing & commissioning of Brass Manual air vent to be provided at all high location of piping, Plant room headers and vertical, external & Internal headers. The air vent to be provided with necessary ball valve. The air vent to be connected with necessary drain pipe and left to the nearest waste drain point / pipe for the chilled water lines as per the Drawing. (For Details Refer Technical Specification and Tender Booklet)

Supply, installation testing & commissioning of 12 mm Test points made of all steel construction, unit shall also include sealant for complete enclosure. These pressure and temperature test points shall comprise a welded socket, into which shall be screwed a selfsealing test plug, with removable cap.(For Details Refer Technical Specification and Tender Booklet)

Provision & installation of Thermowells across chilled water lines and its respective finishing as per consultant instructions(For Details Refer Technical Specification and Tender Booklet)

Supply, installation testing & commissioning of SS Drain cock 20mm dia (With Dead Plugs).The Drain to be connected with necessary drain pipe and left to the nearest waste drain point.(For Details Refer Technical Specification and Tender Booklet)

Supply, Installation, testing and Commissioning of UV Type upto DN 60 & Electro magnetic type from DN 80 and above Flowmeters complete with control wiring in the chilled water lines conforming to specification.(For Details Refer Technical Specification and Tender Booklet)Note : Flow meters should have Minimum 5 Years warranty and calibration for every 6month (For Details Refer Technical Specification and Tender Booklet) 250 mm dia OR 700 USGPM

200 mm dia OR 443 USGPM & 460 USGPM(For Details Refer Technical Specification and Tender Booklet)

125 mm dia OR 208 USGPM(For Details Refer Technical Specification and Tender Booklet)

100 mm dia OR (145 USGPM x 5 nos & 152 USGPM x 1no) (For Details Refer Technical Specification and Tender Booklet)

80 mm dia OR 83 USGPM (For Details Refer Technical Specification and Tender Booklet)

PIPES, VALVES(CONDENSER WATER)-Supply, Installation, Testing & Commissioning of Condenser water piping of MS 'C' Class material following sizes conforming to IS : 1239(Part 1)/ IS 3589 with necessary clamps, vibration isolators and black steel pipes joints & fittings such as bends, tees etc , ( excluding valves, strainers, guages etc)and adequately supported on rigid factory made supports etc duly painted as per specification and as required.(For Details Refer Technical Specification and Tender Booklet) 25 mm dia

32 mm dia (For Details Refer Technical Specification and Tender Booklet)

50 mm dia (For Details Refer Technical Specification and Tender Booklet)

80 mm dia (For Details Refer Technical Specification and Tender Booklet)

100 mm dia (For Details Refer Technical Specification and Tender Booklet)

200 mm dia (For Details Refer Technical Specification and Tender Booklet)

250 mm dia (For Details Refer Technical Specification and Tender Booklet)

300 mm dia (For Details Refer Technical Specification and Tender Booklet)

450 mm dia (For Details Refer Technical Specification and Tender Booklet)

600 mm dia (For Details Refer Technical Specification and Tender Booklet)

VALVES WITHOUT INSULATION-Supply, Installation, testing & commissioning of Butterfly valves with handle and gear type of made of C.S /M.S painted with Fusion Bonded Epoxy(FBE) with 200 microns. Body of C.S / D.I with FBE or Acrylic painter for AL, Bearing with Bronze of graphite inner coating. Seal ring with EPDM and steam of SS316,Disc with SS316.The arrangement of disc and body as to be vulcanized.BFV should have matching flanges with hot dipped galvanized bolts and nuts.Rating PN 16 as per specifications(For Details Refer Technical Specification and Tender Booklet) 25 mm dia

50 mm dia (For Details Refer Technical Specification and Tender Booklet)

80 mm dia (For Details Refer Technical Specification and Tender Booklet)

32 mm dia (For Details Refer Technical Specification and Tender Booklet)

200 mm dia (For Details Refer Technical Specification and Tender Booklet)

250 mm dia (For Details Refer Technical Specification and Tender Booklet)

300 mm dia (For Details Refer Technical Specification and Tender Booklet)

Supply, installation, testing & commissioning of Flanged type "Y" Strainer (PN 16) (with counter flanges) for pumps and with edge neatly folded and screwed. The cap portion of the strainer should have openable cover, to prevent damage to the insulation during servicing,it should have SS /Bronze screen along with valve.(Strainer to have ball valve for drain & body ductile iron) (For Details Refer Technical Specification and Tender Booklet) 200 mm dia

300 mm dia (For Details Refer Technical Specification and Tender Booklet)

Supply, installation, testing and commissioning of Ball Type check valves with CI body cover, and verticle/ horizontal installation and Pressure rating of PN 16 in position complete with flanges, bolts, nuts gaskets etc and conforming to specifications . (For Details Refer Technical Specification and Tender Booklet) 200 mm dia

300 mm dia (For Details Refer Technical Specification and Tender Booklet)

Supply, Installation, testing & commissioning of 2 way Motorised BFV ON/ OFF type complete with Actuator with required torque (will confirm on technical spec given by supplier), transformer (240 /24V), inbuilt controller, matching flanges etc., The valves should have feasibility of changing the inner lining if wornout. The valves actuator shall be complete with necessary inbuilt limit switches for OPEN/CLOSE status feedback to BMS.(IP 65 protection) handle and gear type of extended stem made of C.S /M.S painted with Fusion Bonded Epoxy(FBE) with 200 microns. Body of C.S / D.I with FBE or Acrylic painter for AL, Bearing with Bronze of graphite inner coating or PTFE without any coat. Seal ring with EPDM and steam of SS316,Disc with SS316.The arrangement of disc and body as to be vulcanized.BFV should have matching flanges with hot dipped galvanized bolts,nuts and washers.Rating PN 16. The rest of the details to be as per specs. (For Details Refer Technical Specification and Tender Booklet) 32 mm dia

300 mm dia (For Details Refer Technical Specification and Tender Booklet)

Supply, Installation, testing and Commissioning of UV Type upto DN 60 & Electro magnetic type from DN 80 and above Flowmeters complete with control wiring in the chilled water lines conforming to specification. (For Details Refer Technical Specification and Tender Booklet) 32 mm dia (Auto Bleed off)

32 mm dia (Make up line)

200 mm dia or Max. 600 US GPM

300 mm dia or Max. 1050 US GPM

Supply, installation testing & commissioning of Brass Automatic air vent to be provided at all high location of piping, Plant room headers and vertical, external & Internal headers. The air vent to be provided with necessary ball valve. The air vent to be connected with necessary drain pipe and left to the nearest waste drain point / pipe for the chilled water lines as per the Drawing.(For Details Refer Technical Specification and Tender Booklet)

Supply, installation testing & commissioning of Brass Manual air vent to be provided at all high location of piping, Plant room headers and vertical, external & Internal headers. The air vent to be provided with necessary ball valve. The air vent to be connected with necessary drain pipe and left to the nearest waste drain point / pipe for the chilled water lines as per the Drawing.(For Details Refer Technical Specification and Tender Booklet)

Supply, installation testing & commissioning of 12 mm Test points made of all steel construction, unit shall also include sealant for complete enclosure. These pressure and temperature test points shall comprise a welded socket, into which shall be screwed a selfsealing test plug, with removable cap.(For Details Refer Technical Specification and Tender Booklet)

Provision & installation of water DPT's across chilled water lines and its respective finishing as per consultant instructions(For Details Refer Technical Specification and Tender Booklet)

Provision & installation of Thermowells across chilled water lines and its respective finishing as per consultant instructions(For Details Refer Technical Specification and Tender Booklet)

Supply, installation testing & commissioning of SS Drain cock 32 mm & 40mm dia (With Dead Plugs).The Drain to be connected with necessary drain pipe and left to the nearest waste drain point.(For Details Refer Technical Specification and Tender Booklet)

Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required

Providing & fixing in position the mercury in glass industrial type thermometers.(For Details Refer Technical Specification and Tender Booklet)

Supply, installation, testing of closed type 1000L M.S. Expansion tank with interchangeable EPDM-BUTYL rubber membrane. Expansion tank to be complete with safety relief valve, pressure reducing valve, pressure gauge. Tank to be pressure rated to suit the system pressure and flexible to varying operating temperature variations, fabricated as per IS 2825-1969 and flanges to be IS 6392-1971.Expansion Tank to be supplied with pressurization unit(1W+1S high pressure pumps on M.S. frame,with interconnecting piping,isolation valves,NRV,Y-strainer,pressure gauge,pressure tranmitter,auto logic panel(IP55),electrical MCB and interconnected wiring. Insulation to be 50mm thick as per specifications with 26G Al. cladding. Specifications to be followed for more details on the equipment.

Supply, installation, testing and commissioning of 350 Dia Dirt & Air separator with strainer and auto airvent. Vessel shell diameter is to be three times the nominal inlet/ outlet pipe diameter, with a minimum vessel volume for sufficient velocity reduction.The air separator must be designed, constructed and stamped for 125 psig @ 350°F (862 kPa @ 177°C) in accordance with Section VIII, Division I of the ASME Boiler and Pressure Vessel Code.Insulation as per the connected chilled water piping and as per the specification. The quoted price shall be inclusive of structural support for the tank. (For details refer spec)NOTE: All valves to be PN 16 type only (PMS type un pressured expansion tank)

Supply, Delivery, storing, safeguarding,,Shifting to work place,Installation, Testing and Commissioning of Chlorinated Polyvinyl Chloride pipes (CPVC) of SDR 11 for Make up and Quick fill line as per ASTM D-2846 with all CPVC fittings and specials such as tees, elbows, couplers etc with CPVC brass threaded combination/transition specials such as male adopters brass threaded, female adopters brass threaded, brass FABT tee, brass FABT elbow etc where connection with metal is to be made including cutting holes and chases in walls and floors and refilling it by cement mortar of 1:3 mix (1 Portland Cement : 3 hard settling cement compound) and making good the walls etc as directed by the Engineer in charge. Joints to be made with CPVC solvent as per ASTM F 493 complete. Rates shalll include the cost of all supports & accessories such as universal clamps, threaded rods (10mm),anchor fasteners (Hilti) etc., complete.Note : Insulation of 6mm Nitrile rubber of thermal conductivity 0.036W/mK at 25C, density 25kg/cum., class O type as per specs. (For Details Refer Technical Specification and Tender Booklet) 20 mm dia

25 mm dia

32 mm dia

40 mm dia

50 mm dia

65 mm dia

80 mm dia

100 mm dia

AIR DISTRIBUTION PRODUCTS-Note : Leakage class for all ducts to be class A.Supply, Fabrication, Installation and Testing of galvanized sheet metal with 180 GSM ducts (FACTORY FABRICATED BOX TYPE DUCTS) in accordance with approved shop drawings and as required by the specifications as per SMACNA Standards. . complete with all accessories like vanes, flanges, suspension rods , anchor bolts, GI bolts & nuts, canvas connections, self adhesive gasket(should withstand 50°C), cleats, sealant & the type of joint shall be TDF Flange Class-F..etc., and as required by the specifications. All the duct should be painted with 2layer Aluminum paint and Trap door with minimum leakage. Note: All the connection details such as dimensions of gasket, cleats and other related accessories shall be as per OEM std.(For Details Refer Technical Specification and Tender Booklet) Thickness 0.63 mm sheet

Thickness 0.8 mm sheet

Thickness 1.0 mm sheet

Thickness 1.25 mm sheet

Supply, Fabrication, Installation and Testing of galvanized sheet metal with 180 GSM ducts (SITE FABRICATED DUCTS) in accordance with approved shop drawings and as required by the specifications as per SMACNA Standards. . complete with all accessories like vanes, flanges, suspension rods , anchor bolts, GI bolts & nuts, canvas connections, self adhesive gasket(should withstand 50°C), cleats, sealant & the type of joint shall be TDF Flange Class-F..etc., and as required by the specifications. All the duct should be painted with 2layer Aluminum paint and Trap door with minimum leakage. Note: All the connection details such as dimensions of gasket, cleats and other related accessories shall be as per OEM std. Thickness 0.63 mm sheet

Thickness 0.8 mm sheet

Thickness 1.0 mm sheet

Thickness 1.25 mm sheet

Supply, installation and Testing of factory fabricated galvanised sheet metal Insulated Flat Oval Spiral ducts with powder coated including elbows , Wire Rope Hangers & Supports complete with end fixing in accordance with the approved shop drawings and as required by the specifications as per SMACNA Standards. Installation of the ducting should be high quality. GI Sheets shall be as per IS 277 with zinc coating of 120 gsm and as per specifications. All ducts should be spray painted and colour as approved by architects/consultants/client Thickness 0.63 mm sheet

Thickness 0.63 mm sheet

Thickness 0.8 mm sheet

Actuators ON/ OFF

Actuators MODULATING TYPE

Supply, Installation, testing & Balancing of Extruded Al. Powder coated Grilles for supply Air of the following sizes with all the necessary flanges & al. Collar damper etc. ( Aluminium grilles shall be approved by Architect. Architect shall approve the shade of epoxy powder coating for grilles for supply air of the following sizes.)

Supplying and erecting aluminium powder coated linear grill of suitable size for width length without collar dampers having matching colour with the existing false ceiling and suitable for deflection of 15/30/45 degree.

Supply, installation, testing and commissioning of manually operated, opposed blade, duct mounted, flanged volume control dampers of required sizes in GI construction complete with operating mechanism, mounting arrangement, rubber refrigerant kits etc. complete.

Supply, Installation, testing & Balancing of Extruded Al. Powder coated Grilles for Return Air of the following sizes with all the necessary flanges etc. ( Aluminium grilles shall be approved by Architect. Architect shall approve the shade of epoxy powder coating for grilles for return air of the following sizes.) The thickness of the grille to be not less than 15 mm.

Supply, installation, testing and balancing of powder coated Extruded Aluminum supply air Diffusers with removable core , Aluminum opposed blade volume control dampers & the diffuser shall be of tegular profile in accordance with the approved shop drawings and specifications to fit in the tile size of 600 x 600. The neck size shall be as per the approved shop drawing. (Aluminium diffusers shall be approved by Architect. Architect shall approve the shade of epoxy powder coating for grilles for supply air .)

Supply, installation, testing and balancing of powder coated Extruded Aluminum Return air diffusers with removable core & the diffuser shall be of tegular profile in accordance with the approved shop drawings and specifications to fit in the tile size of 600 x 600. The neck size shall be of following sizes.( Aluminium diffusers shall be approved by Architect. Architect shall approve the shade of epoxy powder coating for grilles for return air of the following sizes.)

Supply, installation, testing and balancing of powder coated Extruded Aluminum Jet diffusers with removable core , Aluminum opposed blade volume control dampers & the diffuser shall be of tegular profile in accordance with the approved shop drawings and specifications to fit in the tile size of dia mentioned below. The neck size shall be of following sizes (Aluminium diffusers shall be approved by Architect. Architect shall approve the shade of epoxy powder coating for grilles for supply air of the following sizes.)

Supply, installation , testing and balancing of Return Air Circular Diffusers (Neck Size) as per specification & approved shop drawing.( Aluminium diffusers shall be approved by Architect. Architect shall approve the shade of epoxy powder coating for return air of the following sizes.)dia 350mm

Supplying and installing of coller damper of galvanised iron material of upto 120 microns for anti corrosive resistance for supply air grill of required size

Supply, Fabrication, Installation and Testing of the Insulated Flexible Ducting/CANVAS , complete with connecting rings, duct supports,The flexible duct shall be made of triple lamination of aluminium foil, polyester and Metalised Polyester film permanently bonded to a coated spring steel wire helix. The exterior shall be wrapped with 25mm thick 24 kg / m3 fibreglass insulation. The outer insulation jacket / vapour barrier shall be made of fibreglass reinforced Metalised Polyester film laminate... etc. as per standards and specification.300 mm dia

Supply & Installation, Testing and Balancing of mixing box of size 600 X 300 X300(ht) removable core & volume control dampers, Chains, links and hooking arrangements as per approved drawings and specifications. The insulation would be 15mm thick cross linked closed cell type Polyolefin foam with factory heat laminated reinforced Al. foil with density 25 kg/m3, the embossed PVC foil is lacquered with corrosive resistant, Insulation joints to be sealed using self adhesive aluminium tape supplied by the manufacturer & fire & smoke classification Class 'O' BS 476 part 6,7 along with standard installation and accessories.

Supply, installation, testing and commissioning of Factory fabricated & powder coated Supply air plenums with 18G double skin construction. Acoustic lining would be 19 mm thick Nitrile Rubber open cell Insulation (Insulation to be of Denstity 32kg/m3, Class O fire rated and as per ECBC-2017. Thermal Insulation for plenum would be 25mm thick cross linked closed cell type Polyurethane foam, Insulation joints to be sealed using self adhesive aluminium tape supplied by the manufacturer & fire & smoke classification Class 'O' BS 476 part 6,7 along with standard installation and accessories. as per specificaions.

Supply, installation, testing and balancing of Al Volume Control Dampers with operating handle aero foil blade with rubber beeding for Supply/Return/Exhaust air duct branches in accordance with the approved shop drawings and specifications.

Supply, installation, testing and commissioning of 90 mins rating CURTAIN TYPE Fire damper UL 555 certified, constructed with outer shell with 1.6mm thick galvanized steel frame and the blade/Leaf with 1.6mm thick GSS. And with necessary flanges for connection with Fusible Link , extended sleeve 400mm / 600mm with complete boxing & spring mechanism, The damper shall be held open by a replaceable fusible link rated at 74degC as per specifications and drawings.

No of Actuator

Supply, Installation, Testing & Commissioning of Spigot & Butterfly Dampers of the following sizes.The damper shall be made of 18G GSS sheet. The blade shall have 3mm rubber gasket beeding for air tightness. Spigots to have dual notch for firmly fixing the flexible ducts.200 mm dia

300 mm dia

Supply, installation, testing and balancing of powder coated Extruded Aluminum Plate Type supply air Diffusers with removable core , Aluminum opposed blade volume control dampers & the diffuser shall be of tegular profile in accordance with the approved shop drawings and specifications to fit in the tile size of 600 x 600. Architect shall approve the shade of epoxy powder coating for supply air of the following sizes.)Note : Neck sizes to be as per the consulant requirement

Supply, installation , testing and balancing of Extruded Al. powder coated External Wall louvers as per specification & approved shop drawing

Supply, installation , testing and balancing of Extruded Al. powder coated External Wall louvers with washable synthetic type air BAG filters media mounted on Aluminum Frame. Filter bank framework shall be fully sealed and constructed from GSS.Note:Exposed ducts & inside the AHU room ducts enamel painting to be considered as mentioned in the specifications.

Supply, Installation, testing & commissioning of UL - 555 S cerified Backdraft damper made of 18G galvanised stainless stell & with damper blades not less than 0.8mm thick, horizontal/ verticle application type. Backdraft pressure to be not less than 25mm. Blade location & positioning shall be such that pressure drop across the dampers should be as less as possible. Damper shall be inclusive of linkages, seals, axles etc as per the specification.Total Area - Fire Damper with PVC gear

Supply, installation, testing & commissioning of single skin circular INLINE Type Exhaust fans/ cabinet type direct driven inline fan, suitable for Outdoor/Indoor installation. The motor is suitable for three phase type with static as required by the tender. Nc levels to be not less than 55dB at 1m from the unit. Winding insulation to be Class F type with IP 55. Motor speeds to be not less than 1450 rpm. Other details to be as per specifications1450 cfm capacity at 20 mm external static pressure fan

1400 cfm capacity at 20 mm external static pressure fan

1200 cfm capacity at 20 mm external static pressure fan

900 cfm capacity at 20 mm external static pressure fan

800 cfm capacity at 20 mm external static pressure fan

Non Cabinate Type - 450 cfm capacity at 20 mm external static pressure fan

Non Cabinate Type -350 cfm capacity at 20 mm external static pressure fan

Non Cabinate Type -300 cfm capacity at 20 mm external static pressure fan

Non Cabinate Type -250 cfm capacity at 20 mm external static pressure fan

Non Cabinate Type -200cfm capacity at 20 mm external static pressure fan

Supply, installation, testing and commissioning of Propeller type fans having following sizes suitable for single phase operation duly epoxy coated complete with gravity louvers, fixing frames and with wire guard on inlet and bird screen at the outlet as per specifications250mm Dia , 10mm SP WG static pressure

200mm Dia , 10mm SP WG static pressure

150mm Dia , 10mm SP WG static pressure

100mm Dia , 10mm SP WG static pressure

Supply, Installation, testing and commissioning of Aluminium powder coated thermally powered SQUARE TYPE VAV THERMOFUSER suitable for cooling only. Each diffuser shall be a complete VAV terminal and thermostat self contained in a nominal 600mm x 600mm diffuser. The diffusers shall vary the supply air volume to provide the VAV cooling. The diffuser shall be suitbale for manual type set point adjuestment of temperature for a range from 23°C to 28°C. Each THERMODIFFUSERdiffuser shall have perimeter blade dampers. Pressure ranges for the unit shall be from 12 Pa to 85 Pa and noise levels from 15 to 30NC. Product shall be warranted for minimum of 6 yrs.200 CFM

Supply, Installation, testing, commissioning and balancing of thermally powered DIGITAL WALL ADJUSTER TYPE Square VAV diffusers (Thermafuser - VAV diffuser) suitable for COOLING only. Each diffuser shall be a complete VAV terminal and thermostat self-contained in a nominal 600mm x 600mm diffuser. The diffusers shall vary the supply air volume to provide VAV cooling. The diffuser shall be suitable for remote adjustment of set point temperature via the Digital Wall Adjuster for a temperature range from 23°C to 28°C. Each diffuser shall have perimeter blade dampers and powder coated apearance hinged panel that can be unlatched and folded down to hang allowing hands to be free for adjusting temperature set points. Instructions for the module shall be on the inside of the appearance panel and outer size of 600 x 600 mm, pressure ranges 12 to 85 pa and noise level 15 to 30 NC. Product shall be warranted for minimum 6 years. 200 CFM

VARIABLE AIR VOLUME & CONSTANT AIR VOLUMESupply, installation, testing, balancing & commissioning of Variable Air Volume (VAV) Units are fabricated out of heavy gauge steel, mechanically sealed with gasketed & leak resistance construction. Both supply & discharge shall be suitable for duct connections.The boxes shall be supplied with all internal attenuation treatment and acoustical damped casing necessary to achieve the required noise criteria level of 35 NC as per ARI standard 880-98 Casing shall be 20 BG minimum fitted with a completely sealed, easily removable means of access to all controller components.Maximum allowable static pressure to the boxes for its satisfactory operation shall not exceed 0.050” WG Maximum allowable static pressure to the boxes for its satisfactory operation shall not exceed 0.050” WG The controller shall be pre-programmed and shall be factory set device for the minimum air flow. All boxes shall be initially factory set at minimum air quantity of 20% of the design requirements. VAV Unit shall be ceiling suspended with hanger brackets & vibration isolators. The VAVs should have factory fitted clamps for mounting the units.All accessories listed under specifications should be considered for pricing VAVs Under shut-off conditions, all boxes shall not have air leakage more than 0.01% .Each VAV controller shall have 3 Universal Inputs available with the provision for 0-10V and 10k Ohm type 2 NTC thermistor input capability0 to 200 CFM (4'' Box)

201 to 350 CFM (5'' Box)

351 to 500 CFM (6'' Box)

501 to 850 CFM (8'' Box)

851 to 1350 CFM (10'' Box)

1351 to 2000 CFM (12'' Box)

2001 to 2700 CFM (14'' Box)

2701 to 3700 CFM (16'' Box)

2701 to 5900 CFM (19'' Box)

INSULATIONSupply & Fixing of Wall & Ceiling OPEN cell Nitrile Rubber acoustic (100MM thick Insulation) and finished with 0.80 mm perforated aluminium sheet etc. complete as required and as per specifications.

Supply, fixing of Duct Acoustic Insulation applied inside of duct work with 15 mm thick Nitrile Rubber open cell Insulation as per specifications,(Insulation to be of Denstity 32kg/m3, Class O fire rated, thermal conductivity of 0.036 w/mK and as per ECBC-2017).

Supply ,installation and testing of 50 mm thick, smart PIR panel's with FSK on both sides with density 42kg/m3Class O fire rated, thermal conductivity of 0.019 w/mK).

Supply ,installation and testing of 25 mm thick, Physically cross linked, closed cell Polyolefin foam with factory applied heat laminated reinforced aluminium foil having density of 25kg/m3. Insulation joints to be sealed using self adhesive aluminium tape specified by the manufacturer. for the exposed ducts & chilled water pipes as per specifications. (Also the insulation to be protected with two layer of Fiber glass cloth plus two layers of shield coating as per specif ications). Quoted price shall be inclusive of Adhesive tapes,etc...

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (Class "0") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required.The thermal conductivity should not exceed 0.037 w/m k 19 mm Note : 24G Reinforced aluminum cladding for Exposed Ducts & Pipes

Providing adhesive thermal insulation for supply / return air duct with 19 mm nitrile rubber insulation having R-value as per the prevailing provisions in ECBC-2007.

Providing and applying of accoustic insulation for air ducts with 25 mm thick, 48kg/cu.m fiber glass faced with RP tissue and covered with 26 SWG perforated aluminium sheets complete.

UFAD SYSTEMFloor diffuserSupply of Alluminium Die Cast 8" Dia. Constant Volume Diffuser with manually adjustable Sliding damper, Max. Cfm 81 @12.5 Pa.

VRV & DX SPLIT SYSTEM -Supplying, erecting, testing and commissioning 7 HP to 8 HP, VRF / VRV air conditioning system, out door unit (ODU) complying type-IV OEM standards working on HFC free refrigerant R410A or other required/suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. celcius and non stop cooling even at 56 deg. celsius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 metre operation in cooling mode with inverter based VRF/VRV technology microprocessor based control compressor starter/control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V ± 10%, 50 Hz, 3 phase power supply, internal copper refrigerant piping, internal wiring and first charge of refrigerant, etc. all housed in powder coated weather proof cabinet on provided angle iron frame or suitable foundation connected to the system in approved manner complete.

Supplying, erecting, testing and commissioning 10 HP, VRF / VRV air conditioning system, out door unit (ODU) complying type-IV OEM standards working on HFC free refrigerant R410A or other required/suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. celcius and non stop cooling even at 56 deg. celsius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 metre operation in cooling mode with inverter based VRF/VRV technology microprocessor based control compressor starter/control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V ± 10%, 50 Hz, 3 phase power supply, internal copper refrigerant piping, internal wiring and first charge of refrigerant, etc. all housed in powder coated weather proof cabinet on provided angle iron frame or suitable foundation connected to the system in approved manner complete.

Supplying, erecting, testing and commissioning 14 HP, VRF / VRV air conditioning system, out door unit (ODU) complying type-IV OEM standards working on HFC free refrigerant R410A or other required/suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. celcius and non stop cooling even at 56 deg. celsius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 metre operation in cooling mode with inverter based VRF/VRV technology microprocessor based control compressor starter/control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V ± 10%, 50 Hz, 3 phase power supply, internal copper refrigerant piping, internal wiring and first charge of refrigerant, etc. all housed in powder coated weather proof cabinet on provided angle iron frame or suitable foundation connected to the system in approved manner complete.

Supplying, installing, testing and commissioning split type variable speed inverter technology room Airconditioning unit 1 TR capacity having ISEER minimum 3.50 to maximum 3.99 suitable to operate on 250V, 50 cycles, A.C. supply having 1 no. of air handling unit hi-wall mounting type and BEE five star rated complete with refrigerant R410A/R32 and copper condensor at position. specification no.APAC/ SAC

Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type indoor unit (IDU) of nominal cooling capacity 1.3TR (421 cfm) to 1.7TR (586 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls, with 3-core copper flexible cord of required length and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be suitable for indoor wall mounting, having an electronic control console, provided with suitable mounting brackets with any additional refrigerant and oil charge as per the requirement during installation, connected to the system complete.1.5TR

Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type indoor unit (IDU) of nominal cooling capacity 1.8TR (594 cfm) to 2.2TR (655 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls, with 3-core copper flexible cord of required length and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be suitable for indoor wall mounting, having an electronic control console, provided with suitable mounting brackets with any additional refrigerant and oil charge as per the requirement during installation, connected to the system complete.2.0TR

Supply, installation, testing and commissioning of VRF/VRF based concealed split ductable type, high static indoor unit (IDU) having nominal cooling capacity of 1.2TR ( 400 cfm ) to 1.7TR ( 600 cfm ) having EER as per BEE standards and specifications with evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, condensate pump, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area, with necessary ceiling suspension arrangement having an electronic control console with providing any additional refrigerant and oil charge as per requirement during installation connected with the system complete.

Supply, installation, testing and commissioning of VRF/VRF based concealed split ductable type, high static indoor unit (IDU) having nominal cooling capacity of 1.8TR ( 600 cfm ) to 2.0TR ( 800 cfm ) having EER as per BEE standards and specifications with evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, condensate pump, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area, with necessary ceiling suspension arrangement having an electronic control console with providing any additional refrigerant and oil charge as per requirement during installation connected with the system complete.2.0TR

Supply, installation, testing and commissioning of VRV / VRF based ductable type, high static indoor unit (IDU) having nominal cooling capacity of 2.5TR ( 980 cfm )to 3.0TR ( 1200 cfm ) having EER as per BEE standards and specifications with evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. having anti-corrosive coating suitable for coastal area, with suitable ceiling suspension arrangement, with an electronic control console and any additional refrigerant and oil charge as per requirement during installation connected with the system complete.nic control console with providing any additional refrigerant and oil charge as per requirement during installation connected with the system complete.2.5TR

Supply, installation, testing and commissioning of VRV / VRF based ductable type, high static indoor unit (IDU) having nominal cooling capacity of 3.1TR ( 1240 cfm )to 4.0TR ( 1600 cfm ) having EER as per BEE standards and specifications with evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. having anti-corrosive coating suitable for coastal area, with suitable ceiling suspension arrangement, with an electronic control console and any additional refrigerant and oil charge as per requirement during installation connected with the system complete.3.1TR

Supply, installation, testing and commissioning of VRV / VRF based ductable type, high static indoor unit (IDU) having nominal cooling capacity of 3.1TR ( 1240 cfm )to 4.0TR ( 1600 cfm ) having EER as per BEE standards and specifications with evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. having anti-corrosive coating suitable for coastal area, with suitable ceiling suspension arrangement, with an electronic control console and any additional refrigerant and oil charge as per requirement during installation connected with the system complete 4TR

Supply, installation, testing and commissioning of DX type Ductable ceiling suspended units as per specification, each complete with filter section DX coil of copper tube & Aluminium fins construction, blowers, squirrel cage induction motor, Condensate drain pan, as described in specifications, casing, coil piping connections, suitable expansion valve, copper pipes, condensate drain connections, fan and vibration isolators,scroll compressor, condensing unit(Outdoor unit) . Motor shall be suitable for 415+/- 10 % volts, 50 cycles, 3 phase AC power supply. The unit should be installed with return air temperature sensor, control wiring from Temperature setting unit upto the outdoor unit and cordless remote to operate the IDU. Quoted price shall include control cabling upto outdoot unit, MS stand to support ODU and refrigerant charging for the entire length of the copper pipes.Unit delivering Capacity of not less than 5.5 TR

Supply, installation, testing and commissioning of VRV / VRF based ductable type, high static indoor unit (IDU) having nominal cooling capacity of 8.0TR ( 3200 cfm ) having EER as per BEE standards and specifications with evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. having anti-corrosive coating suitable for coastal area, with suitable ceiling suspension arrangement, with an electronic control console and any additional refrigerant and oil charge as per requirement during installation connected with the system complete.8.0TR

Supplying, erecting, testing and commissioning centralised programmable remote contol panel (HMI) touch manager controls minimum 16 system of minimum 64 ODU's can be controlled and up to 992 IDU's can be individually mounted and controlled indoor units having minimum 200 mm size colour LCD touch panel, yearly schedule, power proportional distribution function, temperature limitation, history function complete erected on wall with an arrangement to integrate with provided fire alarm system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 6.4 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system and insulation as per ECBC-2017.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 12.7 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 19.1 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 22.2 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 28.6 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 34.9 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying and installation of high pressure grade required size copper connection Y or T- Joints / refnet for liquid and suction line complete erected on wall/ceiling with supports/raceways, Nitrile rubber insulation, painting etc. with brazing and testing for leakages confirming the normal operation of the VRV / VRF air conditioning system.

RO TREATMENT PLANTSupply, Delivery, storing, safeguarding,,Shifting to work place,Installation, Testing and Commissioning of Reverse Osmosis (RO) Treatment plant. Unit consists of the following componentsNote: Provision Ball valves for future unit tappings also to be considered of dia 25mm.Self priming Monoblock pump of flow rate (2.4Cum/hr) of rpm not less than 1800 - I No ( FOr Details REfer Technical Specification and Tender Booklet ) 500 L

Treated water storage tank of SS 304 Food grade 2000 L

S.I.T.C with perfect aligning, proper levelling of booster pump of 900 LPM at 40 m Head, 12.5 HP (10 KW), 3 phase, 415 volt, 50Hz or of suitable HP with suitable stages as per specification no. FF-MFP/BP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 20 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 75/80 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 100 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 150 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 200 mm dia with necessary fittings complete as per specification no. FF-PP

Providing coating of bitumen paint & 4mm thick wrapping for underground 100 mm ring main of fire fighting system.

Providing coating of bitumen paint & 4mm thick wrapping for underground 150 mm ring main of fire fighting system.

Supplying & erecting cast iron double flange butterfly valve of size 75/80 mm dia. complete as per specification no. FF-VL/BFV

Supplying & erecting cast iron double flange butterfly valve of size 100 mm dia. complete as per specification no. FF-VL/BFV

Supplying & erecting cast iron double flange butterfly valve of size 150 mm dia. complete as per specification no. FF-VL/BFV

Supplying and erecting 100 mm dia end line strainer for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting cast iron double flange NRV of size 75/80 mm dia complete as per specification no. FF-VL/NRV

Supplying & erecting Gun metal gate valve of size 20 mm dia complete as per specification no. FF-VL/GV

Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV

Supplying and installing pressure gauge of 100 mm dia., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, and G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG

Supplying and installing pressure switch with 12/15 mm dia isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS

Supplying and erecting Gun metal single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV

Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) fitted with necessary accessories complete as per specification no. FF-FFA/HV

Supplying fire fighting reinforced rubber lined (R.R.L.) hose pipe, 63mm dia, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL

Supplying & erecting gun metal branch pipe of 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specification no. FF-FFA/NZ

The Frame shall comprise of 900 mm wide x 150 mm deep x 1200mm high made of 16 gauge Fibre Reinforced Plastic (FRP) to house the above accessories. The cabinet shall be firmly fixed to the wall with expansion bolts. The cabinet shall be powder coated both internally and externally. The door shall be provided with suitable locking arrangement as per standardswith two keys in recess type compartment for break glass. The quote shall include fixing the cabinet to the wall & making good to the wall.

Supplying and erecting fire resistant mortar (20 kg) with fire resistance class S90 as per National Electrical Code (NEC) SP30-2011 suitable to seal the openings with all kinds of cables, pipes and cable support system in steel and aluminium and plastic profiles ( Except hollow core conductors). The residual openings shall be closed with filler, as per specification no. FF-FRM For estimating purpose consider one bag of 20kg to cover 300mm x 400mm area 150mm thick or 0.018 m3

Supplying and erecting M.S./CRCA cabinet for housing single hydrant valve (size 400 x 400 x 400mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour.

Supplying and erecting M.S./CRCA cabinet for housing Fire Brigade / SIEMESE connections (size 1250 x 400 x 300 mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8" x 6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour.

Supplying and erecting fire brigade header of 150 mm dia, for supplying water in fire tank complete as per specification no. FF-FA/FBC

Supplying and erecting fire brigade header (Siamese connection) of 150 mm dia for supplying water to wet riser system complete as per specification no. FF-FFA/SMC

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 25 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 75/80 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 100 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 150 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 200 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying & erecting cast iron double flange butterfly valve of size 75/80 mm dia. complete as per specification no. FF-VL/BFV

Supplying & erecting cast iron double flange butterfly valve of size 150 mm dia. complete as per specification no. FF-VL/BFV

Supplying & erecting cast iron double flange butterfly valve of size 200 mm dia. complete as per specification no. FF-VL/BFV

Supplying and erecting cast iron double flange NRV of size 75/80 mm dia complete as per specification no. FF-VL/NRV

Supplying and erecting cast iron double flange NRV of size 200 mm dia complete as per specification no. FF-VL/NRV

Supplying and erecting 75/80 mm dia end line strainer for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting 200 mm dia end line strainer for positive suction complete as per specification no. FF-VL/ELS

Supplying and installing pressure gauge of 100 mm dia., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, and G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG

Supplying and installing pressure switch with 12/15 mm dia isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS

Supplying and erecting cast iron double flange sluice valve 200 mm dia. complete as per specification no. FF-VL/SV

S.I.T.C of additional length of exhaust pipes M.S. Medium grade Class B with mineral wool insulation with aluminum sheet with long radius bend from residential silencer with necessary clamps, fixtures, civil works and 2 coat painted with heat resistant, rust proof, bituminous paint of approved colors to full height, in stages of following sizes including suitable rain guard for top. Fixing shall be done with proper GI clamps, expansion bolts, support angle of size 40X25X3 mm, also painted, fixed on the wall / inside the duct etc .complete, as instructed by the Engineer. 150 mm dia M.S. Medium grade with mineral wool insulation with aluminum sheeting.

S.I.T.Cof Flow meter( Electronic type) on Test line to measure 175 % of pump flow and suitable to 150 mm dia.

S.I.T.C of MS air cushion tank on top of each riser fabricated from 6mm thick MS plate, 200 mm in diameter and 1.2 m in height with dished ends fabricated from 8mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories as required and conforming to IS 4736-1968.-

Supply, Unloading, Storing, Shifting, Installation, testing & commissioning of 150mm dia hydraulically operated Sprinkler control valve, with water motor gong bell and trims as required, pressure gauges, drain valves, ball valves,Butterfly valves, check valves, strainers etc. complete. Alarm valve shall be UL listed & FM approved.(PN20)

S.I.T.C of 15 mm (½") dia. NBCM Body chrome finished quartzoid bulb sprinkler having 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR

S.I.T.Cof 15 mm (½") dia. NBCM Body chrome finished quartzoid bulb sprinkler having 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR-Side wall

S.I.T.C vane type water flow detector suitable for detecting flow of water in wet sprinkler pipe of main line or branch lines of 75/80 mm dia having following features 1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4) Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track ) synchronised switches 7) serviceable without draining pipes

S.I.T.C vane type water flow detector suitable for detecting flow of water in wet sprinkler pipe of main line or branch lines of 100 mm dia having following features 1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4) Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track ) synchronised switches 7) serviceable without draining pipes

S.I.T.C vane type water flow detector suitable for detecting flow of water in wet sprinkler pipe of main line or branch lines of 150 mm dia having following features 1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4) Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track ) synchronised switches 7) serviceable without draining pipes

Supplying & erecting cast iron double flange butterfly valve of size 75/80 mm dia. complete as per specification no. FF-VL/BFV

Supplying & erecting cast iron double flange butterfly valve of size 100 mm dia. complete as per specification no. FF-VL/BFV

Supplying & erecting cast iron double flange butterfly valve of size 150 mm dia. complete as per specification no. FF-VL/BFV

Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV

S.I.T.C of G.I. pipe above ground of ‘C’ class ERW of size 25 mm dia with necessary fittings complete as per specification no. FF-PP

S.I.T.C of G.I. pipe above ground of ‘C’ class ERW of size 32 mm dia with necessary fittings complete as per specification no. FF-PP

S.I.T.C of G.I. pipe above ground of ‘C’ class ERW of size 40 mm dia with necessary fittings complete as per specification no. FF-PP

S.I.T.C of G.I. pipe above ground of ‘C’ class ERW of size 50 mm dia with necessary fittings complete as per specification no. FF-PP

S.I.T.C of G.I. pipe above ground of ‘C’ class ERW of size 65 mm dia with necessary fittings complete as per specification no. FF-PP

S.I.T.C of G.I. pipe above ground of ‘C’ class ERW of size 75/80 mm dia with necessary fittings complete as per specification no. FF-PP

S.I.T.C of G.I. pipe above ground of ‘C’ class ERW of size 100 mm dia with necessary fittings complete as per specification no. FF-PP

S.I.T.C of G.I. pipe above ground of ‘C’ class ERW of size 150 mm dia with necessary fittings complete as per specification no. FF-PP

S.I.T.C of gun metal gate valve of size 50 mm dia complete as per specification no. FF-VL/GV

Supply, Unloading, Storing, Shifting to work place, Installation, testing & commissioning of approved type Rosette plates (Recessed type) for Sprinklers below false ceiling area.

Supply, Unloading, Storing, Shifting to work place, Installation, testing & commissioning of Stainless steel corrugated braided flexible pipe(hose) for dropping sprinklers below false ceiling complete with the drop and anchoring bracket in painted MS. The Hose shall have loose nuts on either side ,and shall include a nipple on one side . Pipe shall be UL Listed & FM approved,16 bar pressure rating and 1500 mm long 25 mm dia with supports,fasteners, union / reducer collar, clamps etc., as required.

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall.

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts grouted in wall complete.

Supply, Unloading, Storing, Shifting, Installation, testing & commissioning of Carbon-di- oxide type fire extinguisher of 2.0 kgs. Capacity, CO2 gas filled in brand new seamless cylinder with powder coated finish, made out of Manganese steel, with wheel type valve, discharge nozzle, bend & horn, wal mounting bracket etc. complete, confirming to IS: 2878.

Supply, Unloading, Storing, Shifting, Installation, testing & commissioning of Mechanical Foam type fire extinguisher 9Lts. Capacity, with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, high pressure CO2 gas cartridge, hose and ABS type branch pipe and wall mounting bracket etc. complete, confirming to IS: 10204.

Supply, Unloading, Storing, Shifting, Installation, testing & commissioning of Water type fire extinguisher of 9.0 ltrs Capacity, high pressure water filled in brand new seamless cylinder with powder coated finish, made out of Manganese steel, with wheel type valve, discharge nozzle, bend & horn, wal mounting bracket etc. complete, as per IS -15683

Excavating hard murum / metal road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete.

Making burnt brick masonry with 1:6 ratio cement concrete duly plastered including watering, streaking joint on exposed faces, rocking at joint on exposed faces and watering complete.

Supply, installation, testing and commissioning of in position the signage's of "FIRE BOARDS APPROVED BY MAHARASHTRA STATE FIRE SERVICE - SIZE 2FT X 4FT MADE OUT OF RIGID SHEET 1MM THICK WITH COMPUTER CUT NON-REFLECTIVE SELF ADHESIVE IMPORTED VINYL PAINTED ON THE FRONT OF RIGID SHEET COMPLETE WITH WALL MOUNTING ARRANGEMENTS WITH MIRROR SCREWS".Sign "IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED OTHERWISE"Lettering height of 1.25 cm block letter in red and white background.Sign shall be at least 25 x 30 cm.At each stair enclosure on every floor, indicating the number of floor, in accordance that the numerals shall be bold type and at least 7.5cm high. The numerals and back ground shall be in contrasting colours.

Providing, installing and fixing in position the signage's as mentioned below with same specification explained of "Fire Order" Board comprising of the following: A) EVACUATE THE OCCUPANTS BY USING FIRE EXITS AND EMERGENCY EXITS ONLY AND ASSEMBLE AT VARIOUS ASSEMBLY AREAS.B) IF POSSIBLE TRY TO EXTINGUISH THE FIRE BY USING NEAREST / SUITABLE PORTABLE FIRE EXTINGUISHER OR WATER FROM NEAREST WETRISER.( For Details REfer Technical Specification and Tender Booklet

Supplying and installing of in position the signages "FLOOR SIGNAGE " with manual call point symbol it should contain the following matter on "Opaque " PVC foam board of computrized cut, PVC Non-reflective self adhesive vinyle painted foam board

Supplying and installing of in position the signages " INCASE OF FIRE,BREAK THE GLASS " with manual call point symbol it should contain the following matter on "Opaque " PVC foam board of computrized cut, PVC Non-reflective self adhesive vinyle painted foam board Size 300x100 mm

Supplying and installing of in position the signages " Fire Extinguisher " with symbol it should contain the following matter on "Opaque " PVC foam board of comput rized cut, PVC Non-reflective self adhesive vinyle painted foam boardSize 300x100 mm

Supplying and installing of in position the signages " Assemble Point " with symbol it should contain the following matter on "Opaque " PVC foam board of computrized cut, PVC Non-reflective self adhesive vinyle painted foam board

Supply, Unloading, Storing, Shifting to work place, Installation, testing & commissioning of Emergency Evacution route plan size 24"X18" with Fire Extinguishers, MCP, Hooter, First aid box, safe assembly area & other information etc. Providing wall mounting display Board with double sided 3mm thick imported Acrylic sheet with SS studs & Autoglow Sheets & Traceperacy sheet

S.I.T.C of Addressable fire alarm Panel which consists of display board which will have 160 Character Display with Touch key pad, Mother board which will have CORTEX 32 Bit Processor, Inbuilt RS-485 Networking Circuit for peer to peer networking, Inbuilt USB 2.0 Port for upload and download the Configuration tools, Two inbuilt programmable inputs, Two inbuilt NAC's, and Three Programmable Relays, and 4 Loop Card circuits. power Supply Board which will have SMPS fully protected board, which its operates on 120 to 220V AC ± 10% with 50/60 Hz, battery backup 24V DC with built-in charger. the panel have IP-50 rating Optional: for BMS integration MODBUS converter, Graphical Software, Software for TCP/IP Module, provision for Auto dialler Approval UL Listed,

Supply of Loop Card which will have 254 devices of both detectors and modules in a single line circuit, SLC supports both Class A and Class B wiring Approval: UL Listed,

S.I.T.Cof Graphic Software - to monitor & control the status of the FACP from the windows based system - with Visual & Sound alerts for the fire and fault conditions - with Three Level multi users access

S.I.T.C of Addressable Multi Sensor - Heat Cum Smoke detector with base with Binary coded address setting. Dual LED’s for 360° visibility. Sleek low-profile housing design. Regular 100mm base. IP Rating : IP - 42. Approval: UL Listed, The rate should include the cost of GI junction box.

S.I.T.C of Fault isolator Base capable of monitoring shorted loop circuit and automatically restore communications when shorted conditions are corrected -The rate should include the cost of GI junction box.

S.I.T.C of Addressable Control Module for monitoring the field devices. Binary Coding Setting - Approval: UL Listed, The rate should include the cost of GI junction box. Note: Need to connect with Sounder as External Power Supply required.

S.I.T.C.of Addressable Monitor Module for monitoring the field NO/NC devices. Binary Coding Setting - Approval: UL Listed, The rate should include the cost of GI junction box.

S.I.T.C of Addressable Relay Module. Approval: UL Listed, The rate should include the cost of GI junction box.

Supply of Beam Detector comprising of 4 wire system with Infrared emiter and receiver in a single housing and Four reflector plates - 5-100mtrs. Range - equipped with built-in automatic compensation - in-built laser light for easy alignment - Option for remote indication - Three sensitivity threshold of 18%, 30% & 50% -

Supply of Addressable Zone Interface Module for monitoring the field Conventional devices. Binary Coding Setting -

5 Amps External Power Supply panel (Self Power)

S.I.T.C of Addressable Duct Detector with 2ft. Sampling tubes Note: The Sampling Tubes prices are extra depending on the length of the Tube.The rate should include the cost of GI junction box.

S.I.T.C of Addressable type Manual call point. Etc complete The rate should include the cost of GI junction box. With mini monitor module for activation etc complete

S.I.T.C of HOOTER/ STROBE. Etc complete. The rate should include the cost of GI junction box.

Supply of ModBus Converter to interface Fire Alarm Control Panel and RS 232 / RS 485 with Modbus protocol -

Supply,stroing,testing commissioning of fire survival armoured Cable ,Fiber glass tape wrapped ,ZH inner Outer sheath 2 x 1.5 sqmm cable.

Supplying & laying rigid steel conduit 16 SWG 25 mm. dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No: WG-MA/CC.

Supply, Unloading, Storing, Shifting to work place, Installation, testing & commissioning of 6 Watts two way talk speaker with call switch in CRCA sheet fabricated with L,M,T For talk back facility having call switch with all associate accessories etc complete ( For Two way talk back systems )Including metal box

Supply, Unloading, Storing, Shifting to work place, Installation, testing & commissioning of solid state Mixer Amplifier with below mentioend RMS out put in rack, including necessary control wires, jocks etc. complete.60 Watts

100 Watts

250 Watts

Supply, Unloading, Storing, Shifting to work place, Installation, testing & commissioning of 2R of 40 strand Twin core Twin twisted pvc insulted & Shielded type copper wire with all accessories , for speakers. The cable shall bear ISI certification mark.

Supplying & laying rigid steel conduit 16 SWG 25 mm. dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No: WG-MA/CC.

Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 400 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.

Control unit wall mounting type or system control unit rak mountinng Type all associate accessories etc ., complete (For Public address system)Builtin power supply ,Relay switching circuit,Terminal blocks to terminate the zone wires , amplifier wires etc., For DEtails REfer Technical Specification and Tender Booklet

Supply, Unloading, Storing, Shifting to work place, Installation, testing & commissioning of approved make Digital voice record (Fire voice messages ) all associate accessories etc complete ( for PA Systems)

Supply, Unloading, Storing, Shifting to work place, Installation, testing & commissioning of 6 Watts Wall mounted speaker in CRCA sheet fabricated with L,M,T For talk back facility having call switch with all associate accessories etc complete ( For PA Speaker ) Including metal box For DEtails REfer Technical Specification and Tender Booklet

Supply, Unloading, Storing, Shifting to work place, Installation, testing & commissioning of 19" Standard "22 U" Rack Assembly in CRCA sheet fabricated with L,M,T For talk back facility having call switch with all associate accessories etc complete. For DEtails REfer Technical Specification and Tender Booklet

Supply, Unloading, Storing, Shifting to work place, Installation, testing & commissioning of approved make 1R 40 Strand twin twissted pair shielded PVC insulated, Copper cable armoured cable PVC sheathed, confirming to IS Standards etc., for Detectors, MCP'S, Sounder pwer and all devices with all accessories such as MS saddles, screws, lugs etc., complete. The cable shall bear ISI certification mark. The cable shall be in "Red" color.

Supplying & laying rigid steel conduit 16 SWG 25 mm. dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No: WG-MA/CC.

Supply, Unloading, Storing, Shifting to work place, Installation, testing & commissioning of solid state Mixer Amplifier(500 Watts) of RMS out put in rack, including necessary control wires, jocks etc. complete.60 watts Capacity

500 watts Capacity

250 watts Capacity

S.I.T.C of water mist system including MS pipes, piping accessories, pipe support for different size of pipes, Nozzles and Nozzler assemblies, valves and accessories. The rate should include the cost of EPM, EPM cable and instrumentation etc. completeSupply, installation, testing and commissioning of Electric Pump Unit comprises of a pump skid unit and a controller cabinet. The pump skid unit shall comprises of 6 nos. Motors, water filter, lifting eyes, Water inlet & outlet connections. The motor of pump module number 1 is connected to a Frequency Converter (FC) that can drive the pump at any required speed. Motor shall be 27kW, enclosure rating shall be IP55, inlet & outlet connection DN100 DIN2642 flange. Working pressure 140bar with desired flow of 460ltrs/min. Power consumption – 220kW. Power supply 400V/50Hz. Max. flow @140bar shall be 549ltrs/min. Motor start current 659 A (incl. FWP current 29 A)

Piping, Tubes of Sizes D12X1,2W B

Piping, Tubes of Sizes D30X2,5W B

Piping, Tubes of Sizes D38X3W B

Piping, Straight fittings, G-12-S-A

Piping, Straight fittings, G-30-S-A

Piping, Straight fittings, G-38-S-A

Piping, Clamps,RAA6-112 LONG (25pc/box)

Piping, clamps, RAA6-430 LONG (25pc/box)

Piping, clamps, RAA6-538 LONG (25pc/box)

Piping, T-PIECE ASM , T12-S A

Piping, T-PIECE ASM, T30-S A

Piping, T-PIECE ASM, T38-S A

Piping, Distribution blocks,30S/1+1x12S-A

Piping,Plugs, VKA12-S B

Piping, Plugs, VKA30-S B

Piping, Cutting rings, DPR12-S EO

Piping, Cutting rings, DPR30-S EO

Piping,Cutting rings,DPR38-S EO

Piping,Nuts,M12-S A3C

Piping,Nuts, M30-S A3C

Piping,Nuts,M38-S A3C

Nozzles,Assembly bodies,XCN711K52T10D12S20

Nozzles,Assembly bodies,D69.7/D24.4X10.5

Nozzles,Assembly bodies,LPD57 C-SHAPE

Nozzles,,Assembly bodies,DIN7504-N D3,5X16 8,8 ZN

Nozzles,Accessories,M18X1,5+OR AV8 ASM

Nozzles,HF2000,C12-57C/0

Nozzles,HF2000, C20-57C

Valves, Section ball valves,SBA 40-A3P-S38/30-10-M

Valves,Ball valves,BKH12S (AS.)

Electrical components,Cables,15 m starter cable (MSPU and EPU)

Electrical components,EPU Cables,EPU FC Motor Cable, L=15m

Electrical components, EPU Cables,EPU Signal Cable, L=15m

Central Control Station (BMS ROOM in ADMIN BLOCK)Supply, installation, testing and commissioning of server Desktop: INTEL CORE i5 or i7, 3GHz,8GB RAM, 1TB HDD, 29" LCD monitor, USB Mouse, USB keyboard, DVD / CD writer, modem/IP connectivity, IP based A4 Size colour laser printer, configuration with, Windows 10 - 64 bit operating system.

Supply, Installation, testing and commissioning of 55” diagonal HD LED plasma TV with a resolution of 1920 x 1080 Pixels – MINIMUM, 230 V AC Suitable for Wall /floor/ceiling mounting with built in speakers, Composite video, S Video, SVGA, Co-axial cable, Stereo Audio in and suitable PC input(15 pin), 4 Audio out, Video out output, with minimum 2 HDMI and 2 USB inputs with required workstation PC & all mounting accessories complete as required.

Supply, Installation, Testing and Commssioining BMS Workstations: Processor: Intel ® Core i3 – 5550U or higher, Intel Chipset, Minimum 4-GB DDR SDRAM 1600-MHz, Minimum 1 TB SATA 3Gbps HDD, 7200rpm HDD Capcity,Integrated 100/1000 Mbps Ethernet Controller, 19” TFT Monitor or higher & wireless Keyboard & mouse with required Windows.

Building Mangament System SoftwareSupply, Installation, Testing & Commissioning of BMS Software - HMI Graphic Software, Energy Conservation Calculation Software, Energy Management & Engineering Software, trends, charts and reports. The software shall be Web based Server / Client software with minimum of 5 user licences as per technical specifications with all necessary Hard ware / Software Keys and Licenses as required.The Building Mangament System Softwaresoftware shall support integration of Access control system, CCTV System, Lighting management system (LMS) & other Third Party Integrations. - The Software with includes Critical Alarm SMS facility to GSM mobile as per the cleint requirement. - The Software will generate customised reports as per the client requirement for all Energy, Water meters.

DDC controllers and Panels- BACnet IP controllers shall be with real time clock & programmable memory. The Controller shall have built-in two Ethernet ports, to enable to form RSTP loop where ever required. Each DDC shall have built in LCD display & dial/button for local control & monitoring. The networkable DDC's shall be capable of peer to peer communication, The Controller shall have built in memory to save graphics & logics for the connected points. Supply, Installation, Testing & Commissioning of IP based DDC controllers with double door IP 67 rated outdoor DDC panel with canopy on top and mounting stand for terrace floor equipments (as per IO summary sheet) with native BACnet open protocol for accomodating IO points defined in the Summary as per technical specificatiodn with all other mounting accessories complete as required.DDC controllers shall be pure IP DDC controller. No MSTP is allowed.DDC Panel-2 for COOLING TOWER (Dual fans) - Terrace Floor (AI - 11, DI - 44, AO - 5, DO- 14)

DDC Panel-1 for AHU - Type D (AHU 1 & 2 - IDEC unit) - 2nd Floor (open area) (AI - 14, DI - 22, AO - 7, DO- 3)

DDC Panel-2 for PRESSURIZATION UNITS - TERRACE FLOOR (AI - 2, DI - 11, AO - 0, DO- 2)

DDC Panel-7 for AHU - Type C (AHU 27)-Terrace Floor B.A (AI - 26, DI - 27, AO - 8, DO- 8)

DDC Panel-8 for AHU - Type C (AHU 25) -Terrace Floor B.Comm (AI - 20, DI - 20, AO - 6, DO- 7)

DDC Panel-9 for AHU - Type C (AHU 26) -Terrace Floor B.Comm (AI - 26, DI - 26, AO - 8, DO- 8)

DDC Panel- 10 for AHU - Type C (AHU 23)-Terrace Floor- B.Com (AI - 20, DI - 20, AO - 6, DO- 7)

DDC Panel- 11 for AHU - Type C (AHU 24)- Terrace Flr B.Comm (AI - 20, DI - 20, AO - 6, DO- 7)

DDC Panel-12 for AHU - Type C (AHU 18)- Terrace Flr B.Comm (AI - 40, DI - 37, AO - 10, DO- 13)

DDC Panel-13 for AHU - Type B (AHU 17)-Terrace Flr B.Comm (AI - 20, DI - 18, AO - 5, DO- 6)

DDC Panel-3 Terrace Floor (AI - 0, DI - 14, AO - 0, DO- 0)

DDC Panel-10 for AHU - Type C (AHU - 7 & 8) - Terrace Floor (AI - 42, DI - 51, AO - 15, DO- 6)

DDC Panel-4 for AHU - Type A (AHU 03 & 05) - Terrace Floor (AI - 37, DI - 71, AO - 16, DO- 20)

DDC Panel-5 for AHU - Type A (AHU 04 & 06) - Terrace Floor (AI - 38, DI - 65, AO - 18, DO- 22)

Supply, Installation, Testing & Commissioning of IP based DDC controllers with single door IP54 rated indoor DDC panel for internal equipments (as per IO summary sheet) with native BACnet open protocol for accomodating IO points defined in the Summary as per technical specification with all other mounting accessories complete as required.DDC controllers shall be pure IP DDC controller. No MSTP is allowed.DDC Panel-1 for CHILLER PLANT ROOM (AI - 54, DI - 112, AO - 10, DO- 17)

DDC Panel-1 for AHU - Type C (AHU 01) - LGF AHU Room (AI - 27, DI - 17, AO - 10, DO- 4)

DDC Panel-2 for AHU - Type C (AHU 02) - LGF AHU Room (AI - 29, DI - 18, AO - 11, DO- 5)

DDC Panel-3 for AHU - Type B (AHU 05) -GF B.Com AHU Room (AI - 26, DI - 20, AO - 5, DO- 9)

DDC Panel-4 forAHU-Type B (AHU 06) -GF B.Com AHU Room (AI - 31, DI - 22, AO - 5, DO- 11)

DDC Panel-5 for AHU - Type B (AHU 07)-GF BA AHU Room (AI - 27, DI - 18, AO - 5, DO- 7)

DDC Panel-6 for AHU - Type B (AHU 08)- GF BA AHU Room (AI - 31, DI - 22, AO - 5, DO- 11)

DDC Panel-14 for - Type E Ceiling Suspended Unit - 2nd Floor (AI - 14, DI - 5, AO - 5, DO- 0)

DDC Panel-15 for - Type E Ceiling Suspended Unit - Ground floor - B.comm. (AI - 4, DI - 69, AO - 0, DO- 3)

DDC Panel-16 - Ground floor - B.A (AI - 0, DI - 25, AO - 0, DO- 0)

DDC Panel-1 for Type E Ceiling Suspended Unit (CSU-1) - GF (South wing) (AI - 14, DI - 41, AO - 3, DO- 6)

DDC Panel-2 for Type E Ceiling Suspended Unit (CSU-2 & 3) - GF (North wing) (AI - 14, DI - 14, AO - 5, DO- 3)

DDC Panel-1 for AHU - Type B (AHU 01) -LGF (AI - 19, DI - 10, AO - 5, DO- 3)

DDC Panel-2 for AHU - Type B (AHU 02) -LGF (AI - 13, DI - 8, AO - 3, DO- 3)

DDC Panel-3 for Type E Ceiling Suspended Unit (CSU-01) - LGF (AI - 16, DI - 7, AO - 5, DO- 3)

DDC Panel-4 for Type E Ceiling Suspended Unit (CSU-01,02,03) - LGF (AI - 0, DI - 10, AO - 0, DO- 4)

DDC Panel-5 for AHU - Type B (AHU 03) - GF (AI - 17, DI - 9, AO - 3, DO- 4)

DDC Panel-6 for - Type E Ceiling Suspended Unit (CSU-04 , 05) - GF (AI - 26, DI - 14, AO - 7, DO- 4)

DDC Panel-7 for Type E Ceiling Suspended Unit (CSU-4,5,6,7,8) - GF (AI - 6, DI - 43, AO - 0, DO- 10)

DDC Panel-8 for AHU - Type B (AHU 05) -1st Floor (AI - 19, DI - 11, AO - 5, DO- 4)

DDC Panel-9 for AHU - Type B (AHU 06) - 2nd Floor (AI - 24, DI - 14, AO - 5, DO- 4)

DDC Panel-1 for AHU - Type B (AHU 01) -GF (AI - 16, DI - 15, AO - 5, DO- 7)

DDC Panel-2 for Type E Ceiling Suspended Unit (CSU-01) - 2nd Floor (AI - 10, DI - 26, AO - 3, DO- 2)

DDC Panel-3 for AHU - Type B (AHU 02) -3rd floor (AI - 14, DI - 17, AO - 5, DO- 7)

DDC Panel-1 for STP UNIT (AI - 4, DI - 5, AO - 0, DO- 3)

DDC Panel-2 for STP UNIT (AI - 4, DI - 5, AO - 0, DO- 3)

Supply, installation, commissioning of following Sensors and field devicesDifferential pressure switch - (50-500pa) (indoor type)

Differential pressure switch - (50-500pa) (Wheather proof with Enclosure outdoor type)

Duct mounted T&RH sensor - ± 0.1 degC, ±2% RH (indoor type)

Duct mounted T&RH sensor - ± 0.1 degC, ±2% RH (Wheather proof with Enclosure outdoor type)

Duct mounted CO2 sensor - ± 75PPM Accuracy (indoor type)

Duct mounted CO2 sensor - ± 75PPM Accuracy (Wheather proof with Enclosure outdoor type)

Duct Static Pressure Sensor - ±5% (indoor type)

Duct Static Pressure Sensor - ±5% (Wheather proof with Enclosure outdoor type)

Space temperature and RH sensors - ±0.3deg C Accuracy (with display)

Conductivity sensor - ±5% (Wheather proof with Enclosure outdoor type)

Hydrogen Sensor - ±5%

Immersion Temperature sensor - 4 inch - ±0.1deg C Accuracy (indoor type)

Thermowell - 4 inch (indoor type)

Immersion Temperature sensor - 4 inch - ±0.1deg C Accuracy (Wheather proof with Enclosure outdoor type)

Thermowell - 4 inch (Wheather proof with Enclosure outdoor type)

Immersion Temperature sensor - 6 inch - ±0.1deg C Accuracy (indoor type)

Thermowell - 6 inch (indoor type)

Immersion Temperature sensor - 6 inch - ±0.1deg C Accuracy (Wheather proof with Enclosure outdoor type)

Thermowell - 6 inch (Wheather proof with Enclosure outdoor type)

Water Differential Pressure Transmitter - ±1% FS Accuracy (0-100 PSI Range) with valve bracket assembly

Level sensors for Cooling Tower & make-up Tank Water Levels

Ambient T+RH - ± 0.1 degC, 2% RH (IP65 Protection) (Wheather proof with Enclosure outdoor type)

Ambient CO2 with Weather proof Enclosure - ±75ppm (Wheather proof with Enclosure outdoor type)

Duct mounted Temperature sensor - ± 0.1 degC, ±2% RH (indoor type)

Duct mounted Temperature sensor - ± 0.1 degC, ±2% RH (Wheather proof with Enclosure outdoor type)

Lake Sensor ( water quality sensor - IP 68)

Level Transmitter for STP, Rain water, Muncipal & Ponds water level monitoring

Supply, Installation, Testing & Commissioning of UL listed & BTL Certified 3rd party integration units routers/converters/ integration modules for Integration of the following third party systems supporting multi protocols like BACnet, Modbus, RS485 etc as per technical specification with all other mounting accessories complete as required.The same shall be enclosed in a metal enclosure with all necessary electrical components to cater required power supply and successful operation. Note: (Refer IO Summary of Third party integration sheet) - System integration unit shall be of same make as of BMS system - Critical points more than 150 soft Integration points shall have a dedicated IP based Integrator. No two buildings shall be clubbed in single Integrator.Chiller Integration- 20 points each. Protocol: Modbus/RS-485 or BACnet/IP

VFD Integration - 5 points each. Protocol: Modbus/RS-485 or BACnet/IP

EC Fans Integration - 5 points each. Protocol: Modbus/RS-485 or BACnet/IP

UPS Integration - 15 points each. Protocol: Modbus/RS-485 or BACnet/IP

FAS integration - 15 points each. Protocol: Modbus/RS-485 or BACnet/IP

Lift Integration - 5 points each. Protocol: Modbus/RS-485 or BACnet/IP

DG Integration - 15 points each. Protocol: Modbus/RS-485 or BACnet/IP

Water Meter Integration - 5 points each. Protocol: Modbus/RS-485 or BACnet/IP

ENERGY METERS Integration - 10 points each Protocol: Modbus/RS-485 or BACnet/IP

VAV Integration- 5 points each. Protocol: Modbus/RS-485 or BACnet/IP

HSD Integration - 20 points each. Protocol: Modbus/RS-485 or BACnet/IP

WTP/STP Integration - 15 points each. Protocol: Modbus/RS-485 or BACnet/IP

Lighting Management system (LMS) Integration - 15 points each. Protocol: Modbus/RS-485 or BACnet/IP

Supply and laying of following FRLS PVC Insulated, PVC sheathed ATC copper conductor multistranded, Lead Free cables.

2C X 1.0 SQ.MM - armoured screened Cable

3C X 1.0 SQ.MM - armoured screened Cable

4C X 1.0 SQ.MM - armoured screened Cable

6C X 1.0 SQ.MM - armoured screened Cable

2C x 1.5 SQ.MM - armoured screened Twisted Pair cable for DDC communication and 3rd party intetegrations

Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.

Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.

Supplying & laying HMS PVC conduit 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying & erecting GI flexible Conduit 25 mm dia. conforming to I.S. with required number of couplings, bushes, check nuts etc. complete

WHEATHER STATIONweather station is a weather data management and presentation system for meteorological data collected by individual sensors from a site.(i.e..rainfall, wind velocity, relative humidity and temperature)

Supply, Installation, Testing and Commssioining for ACS Server: Xeon® 64-bit 4 Core processors E5, 8.0 GB or better memory, 2 on-board Intel GbE NICs, 2TB SATA 3Gbps HDD Capacity,Redundant, hot-swappable PSU and fan modules, 22” TFT Monitor or higher & wireless Keyboard & mouse with required Windows as per technical specification

Supply, installation, testing & commissioning of ACS Management Software: Access Control Software which is a modular, networked access control and alarm monitoring system, comprised of proven commercial off the shelf components, capable of handling large proprietary corporations with alarm monitoring, video imaging, badging, CCTV integration, visitor management, email notification, BAS integration. The system shall assure long time performance, cost effective upgrade capability and allow for easy expansion or modification of inputs, outputs and remote control stations.- 25k card holders. - 05 access workstations. - Door licenses required for enabling. - Photo ID & image verification. - Time & Attendance module with necessary reports as per clients requirement incl. of customization. - Graphical User Interface of maps / layouts of the complete campus. - Any other license required to meet the functional requirements of this project.

Supply, Installation, Testing and Commssioining of ACS Workstations: Processor: Intel ® Core i3 – 5550U or higher, Intel Chipset, Minimum 4-GB DDR SDRAM 1600-MHz, Minimum 1 TB SATA 3Gbps HDD, 7200rpm HDD Capcity,Integrated 100/1000 Mbps Ethernet Controller, 19” TFT Monitor or higher & wireless Keyboard & mouse with required Windows, IP Webcameras.

VingCard Multi User Software with 2 Check in station compatibility: PMS Interface capability through either TCP/IP, Serial RS-232 or DLL/file interfac. Automatic Check-in feature and support Kiosk, and TCP/IP Network. Capable to support shared encoders between different workstations. System based on client/server applications Standard type PMS terminals with a Graphical User Interface running on a Microsoft Windows Platform or from stand-alone terminals not interfaced to a PMS system Provides differentiated log-on rights and be protected by passwords or unique user cards. Automatic backup and restore functions for Database. Ability to interface to both the PMS and POS system of the hotel including the production of cards that are capable of carrying POS information to be used at terminals throughout the Block Online & Offline mode compatibility.

VingCard RFID Network Encoder: USB and Network compatible versions, Configurable through web interface , Color Display, Sound Signals, Encoding, verification and auto update of RFID cards.

Mifare UL Card: Plain white Guest Card with Anti-cloning feature. Customized printing possible with additional charges

Electrical Control Unit intelligent only for rfid cards.

System Set up, programing, testing & commissioning of locks, Management training

Service Cable RJ12 FOR 3g RFID

Cable RJ12 for USB Adaptor

Supply, installation, testing & commissioning of Main ACS Controller: IP based Door Readers Controller expandable upto 16 / 96 readers which supports all major reader technologies and biometrics on the same network. The Controller (with RS232/485/ETHERNET port) & shall have Users memory 500,000 (96 reader controller) or 40,000 (16 reader controller) & offline event 10000. The same shall include fail safe/fail secure lock jumper, power supply, housing, in-built battery backup as per technical specification with all mounting accessories, power supply & hosuing complete as required & with required Enclosures.

Supply, Installation, Testing and Commssioining of Door Expansion Modules provides up to 2 reader inputs and 1 locking device outputs. 2 reader ports configurable for either Wiegand or RS-485 reader operationas per technical specification with all mounting accessories, power supply & hosuing complete as required & with required Enclosures.

Supply, Installation, Testing and Commssioining of Door Expansion Modules provides up to 8 reader inputs and 4 locking device outputs. 8 reader ports configurable for either Wiegand or RS-485 reader operationas per technical specification with all mounting accessories, power supply & hosuing complete as required & with required Enclosures.

Smart Card Reader: Supply, Installation, Testing and Commssioining of CE Approved smart card reader with read range upto 60 mm supporting RS-485 or Wiegand connection which is fully encapsulated design with environment IP rating of IP65 as per technical specifications

Biometric Fingerprint Readers: Supply, Installation, Testing and Commssioining of Biometric fingerprint card reader with UL Certified sensor with 3,000 fingerprint templates, 250,000 IDs in authorized user list, 1 Million logs, unlimited on card, False Rejection / Acceptance Rate 0.01% / 0.001%, IP65 and vandal resistant (IK08) as per technical specifications.

Supply, Installation, Testing and Commssioining of Biometric Enrollment unit

Supply, Installation, Testing and Commssioining of Electro-magnetic locks - Single leaf door with required mounting brackets, minimum of 600 lbs holding capacity and power consumption not more than 6 W.

Supply, Installation, Testing and Commssioining of Electro-magnetic locks - Double leaf door with required mounting brackets, minimum of 600 lbs holding capacity and power consumption not more than 10 W.

Supply, Installation, Testing and Commssioining of surface / flush mounted (as required at site) Magnetic Contact (Door position sensor) for access controlled doors as per the tender specifications.

Supply, Installation, Testing and Commssioining of surface / flush mounted (as required at site) PUSH BUTTON EXIT for access controlled doors as per the tender specifications.

Supply, Installation, Testing and Commssioining, Emergency door release suitable for access control system to disable the Electromagnetic locks in case of emergency with necessary back box and all mounting accessories complete as required.

Supply, Installation, Testing and Commssioining of panic bar for fire exit doors as per Specification (For fire exit doors).

Supply, Installation, Testing and Commssioining of Local scare alarm (HOOTERS) with required wiring between LCA & door contacts (For fire exit doors).

Supply of Mifare 4k Smart Cards for requirement of project.

Supply, Installation, Testing and Commssioining of Card printers (2-sided color printer with laminated) for printing the details on card issuals & with consumables for printing the smart cards. (in BMS Room).

Supply, Installation, Testing and Commssioining of Maxi prox HID long range reader for Boom Barriers with 13.56 MHz contactless smart card technology supporting multi-factor authentication of identity.

Supply, Installation, Testing and Commssioining of Boom barriers with 3.5 m boom with housing material of Galvanized phosphate-treated steel sheet of min 2 mm Thickness, operating at 230 V AC, 50 Hz with max power consumption of not more than 500 W along with reflectors on the barrier and push switch for manual operation.

Supply, Installation, Testing and Commssioining of Boom barriers with Customized 2 m boom with housing material of Galvanized phosphate-treated steel sheet of min 2 mm Thickness, operating at 230 V AC, 50 Hz with max power consumption of not more than 150 W along with reflectors on the barrier and push switch for manual operation.

Supply and surface laying of 8 core x 1 Sq mm Un armoured Shielded, Copper Conductor, PVC sheathed Cable with suitable size PVC conduits with Saddle Supports every 0.3 meters, fittings and accessories. (for connecting controller to Access Readers.)

Supply and surface laying of 6 core x 1 Sq mm Un armoured Shielded, Copper Conductor, PVC sheathed Cable with suitable size PVC conduits with Saddle Supports every 0.3 meters, fittings and accessories. (for connecting controller to Locks & Magnetic contacts.)

Supply and surface laying of 4 core x 1 Sq mm Un armoured Shielded, Copper Conductor, PVC sheathed Cable with suitable size PVC conduits with Saddle Supports every 0.3 meters, fittings and accessories. (for connecting controller to Fire Exit Doors.)

Supply and surface laying of 2 core x 1 Sq mm Un armoured Shielded, Copper Conductor, PVC sheathed Cable with suitable size PVC conduits with Saddle Supports every 0.3 meters, fittings and accessories. ( for connecting controller to push button exit switch.)

Supply and surface laying of 2 core x 1.5 Sq mm Un armoured Shielded, Copper communication Twisted pair Conductor, PVC sheathed Cable with suitable size PVC conduits with Saddle Supports every 0.3 meters, fittings and accessories. (for Interconnecting the Door controller modules.)

Supplying & installing UTP networking cat-6 cable suitable for LAN / WAN Computer net-working as per specification No. WG-COC/NC

Supplying & laying HMS PVC conduit 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supply, Installation, Testing & Commissioning of Electrical operated stainless steel turnstile tripod with BLDC with drop arm feature. The Tripod barrier shall be positive action lock which prevents two person passes at a time. The tripod shall be LED line indications to regulate the traffic flow. The turnstile will have a provision for fixing the card reader and cabling provision from inside the turnstile With Ss 304 Body and SS Roatar arms With jumping and Crawling Sensor. (Outdoor type with IP-54)

Supply & Installation of Canopy for Turnstile Bay with all necessary fixing accessories.

Supply, Installation, Testing & Commissioning of Stainless steel Electro Mechanical 'P' type arm swing (swing gate). The cabinet or center pillar shall be constructed from 16SWG stainless steel. The Swing arm length 900mm. (Outdoor type with IP-54)

Supply , Installation , Testing and Commissioning of indoor fixed door Camera : Fixed Dome with Fixed - focal 2MP camera. Buitl in IR effective upto 30m . Field of view 34° ~ 107° (Horizontal)19° ~ 56° (Vertical)39° ~ 133° (Diagonal) . Video Compression: H.264 & MJPEG.Maximum Frame Rate: 30 fps @ 1920x1080. ONVIF Camera.S/N ratio ; 50dB or Better .Dynamic Rantge : 110dB or better.Shutter Time :1/5 sec. to 1/25,000 sec. or better .Compression : G.711 , G.726 .

Supply , Installation , Testing and Commissioning of fixed type Dome Camera : Fixed Dome with Veri-focal 2MP Camera.Built-in IR illuminators, effective up to 30 meters with Smart IR II, IR LED*4 . Field of View : 33° ~ 97° (Horizontal) 19° ~ 53° (Vertical) 38° ~ 114° (Diagonal).Compression : H.265, H.264, MJPEG. Maximum Frame Rate : 30 fps @ 1920x1080. Casing: Weather-proof IP66-rated housing.ONVIF Camera. S/N ratio ; 50dB or Better .Dynamic Rantge : 110dB or better.Shutter Time :1/5 sec. to 1/25,000 sec. or better .Compression : G.711 , G.726 .

Supply , Installation , Testing and Commissioning of Bullet Camera : Outdoor type Bullet network camera equipped with a full HD sensor capable of 2048 x 1536(4MP) resolution at 30 fps with veri-focal lens. Built-in IR illuminators, effective up to 30 meters with Smart IR , IR LED*5. H.264 MJPEG Compression Technology.Weather-proof IP66 rated Housing.Field of View 33° ~ 93° (Horizontal),18° ~ 50° (Vertical),37° ~ 110° (Diagonal). ONVIF Camera.S/N ratio ; 50dB or Better .Dynamic Rantge : 110dB or better.Shutter Time :1/5 sec. to 1/25,000 sec. or better .Compression : G.711 , G.726 .

Supply , Installation , Testing and Commissioning of PTZ Camera : Outdoor-ready Full HD IR PTZ dome cameras with high power PoE injector .Resolution 2mp 1920*1080 . Equipped with 250M IR illuminators and a 30x optical zoom lens. Video Compression :H265 , H264 , MJPEG. Field of View : 2.3° ~ 64° (Horizontal),1.3° ~ 36° (Vertical),2.6° ~ 73° (Diagonal).Casing : IP66, IK10, NEMA 4X. ONVIF Camera. S/N ratio ; 60dB or Better .Dynamic Rantge : 110dB or better.Shutter Time :1/5 sec. to 1/10,000 sec. or better .Compression : G.711 , G.726 .

Supply & installation of Mounting Pole for PTZ Cameras : 6.5 Mtrs G.I. Octagonal Pole (70 mm A/F (Top) x 130 mm A/F (Bottom) x 5 mm thick with base plate of 250 x 250 x 16 mm, 4 nos. 600 mm long M20 foundation bolts & hardware (suitable reinforcements to be inserted in the foundation and 40mm x 2 nos. GI pipes for In/Out of main cables) Any other accessories etc. required complete in all respect as per direction of Engineer in charge. The pole shall also be provided with recessed lockable GI junction box of suitable size and flush door at the bottom with proper strengthening for the cutout of the door opening of junction box. The cost of RCC foundation shall be paid separately, with accessories etc. all complete.

Supply & installation of Mounting Pole for outdoor Varifocal (bullet type) Cameras : 4.5 Mtrs G.I. Octagonal Pole (70 mm A/F (Top) x 130 mm A/F (Bottom) x 5 mm thick with base plate of 150 x 150 x 8 mm, 4 nos. 400 mm long M20 foundation bolts & hardware (suitable reinforcements to be inserted in the foundation and 30mm x 2 nos. GI pipes for In/Out of main cables) Any other accessories etc. required complete in all respect as per direction of Engineer in charge. The pole shall also be provided with recessed lockable GI junction box of suitable size and flush door at the bottom with proper strengthening for the cutout of the door opening of junction box. The cost of RCC foundation shall be paid separately, with accessories etc. all complete.

Supply, Installation, testing and commissioning of 42” diagonal HD LED plasma TV with a resolution of 1920 x 1080 Pixels – MINIMUM, 230 V AC Suitable for Wall /floor/ceiling mounting with built in speakers, Composite video, S Video, SVGA, Co-axial cable, Stereo Audio in and suitable PC input(15 pin), 4 Audio out, Video out output, with minimum 2 HDMI and 2 USB inputs withrequired workstation which includes PC & all mounting accessories complete as required.

Supply, Installation, testing and commissioning of 55” diagonal HD LED plasma TV with a resolution of 1920 x 1080 Pixels – MINIMUM, 230 V AC Suitable for Wall /floor/ceiling mounting with built in speakers, Composite video, S Video, SVGA, Co-axial cable, Stereo Audio in and suitable PC input(15 pin), 4 Audio out, Video out output, with minimum 2 HDMI and 2 USB inputs with required workstation which includes PC & all mounting accessories complete as required.

Supply, Installation, testing and commissioning of Central Controlled Video Management system : software with modular enterprise level software solution, object-oriented architecture / design, with an 256 number of cameras to appear as a single Site to the end-user, with 5 workstation license to be configured into one logical enterprise implementation with a single Graphical User Interface (GUI) (Processor: Intel ® Core i5 – 5550U or higher, Intel Chipset, Minimum 16-GB DDR3 SDRAM 1600-MHz, Minimum 1 TB SATA 3Gbps HDD, 7200rpm HDD Capcity, Minimum 2GB nVIDIA Graphics Card, Integrated 100/1000 Mbps Ethernet Controller, two 24” TFT Monitor or higher & wireless Keyboard & mouse with required Windows & antivirus as per technical specifications. )

Supply , Installation , Testing and Commissioning of PC : i5-8500/16 GB/1 TB/Win 10 Pro/19.5" - E2016H/DVD RW/3 Yrs/ 2 GB GOTAC GRAPHIC CARD

Supply , Installation , Testing and Commissioning of Storage device : for cctv recording storage : 12-Bay quad-core 1.7 GHz rackmount NAS with Dual 250W redundant PSU, 4GB DDR4 UDIMM RAM (max 16GB), SATA 6Gb/s, 2x 10GbE SFP+ LAN, 2x GbE LAN, 1x PCIe Gen2 x2 slot/RAIL KIT /12X10 TB 7200 RPM,6 GBPS Enterprise HDD -99 TB approx after RAID 5 without Storage Pull

Supply , Installation , Testing and Commissioning of Power Injector : Power Injector input : 230VAC , output : 24Vdc,2A.

Supply , Installation , Testing and Commissioning of LIU . 6 Port-Sliding Patch Panel-1U, 2c/o with Future Ready 1BP, 3LCD x1P, 6LC Pigtails.

Supplying, fixing, and configuring ethernet managed ethernet switch of 24 ports with 2 SFP + 2 combo port and web view/CLI on provided rack or as directed as per specification no. WG-NWC/GBS

Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP

Supplying and fixingTool-less shutter Keystone Jack (RJ- 45)in provided Patch Panel complete as per specification no. WG-NAS/KJ

Supplying and fixing rack mounted type 12 Ports, light guide unloaded interconnect unit with adapter panel for termination of optical fibre cables on wall/ provided U rack complete as per specification no. WG-NAS/ LIU

Supplying, fixing, and configuring media convertor 1000Base-T to 1000 base-SX SC multi-mode media converter (550m) complete.

Supplying, fixing, and configuring 8-ports managed gigabit switches layer-2, 10/100/1000 base-T PoE smart switch plus 2 SFP only complete.

Supplying and plugging FRLS duplex 3 meter length, Fibre Patch cord LC-LC MM(50) OM4 LSZH DUPLEX complete as per specification No. WG-COC/FPC

Supplying, fixing, and configuring 8-ports 10/100/1000Mbps unmanaged gigabit PoE Switch complete.

Supplying and fixing 8 port patch panel with tool-less keystone jacks in provided U Rack complete.

Supply , Installation , Testing and Commissioning of IO. Input/Output for Jack Panel .White.

Supplying, fixing, and configuring web smart power over ethernet switch of 24 ports on provided rack or as directed as per specification No. WG-NWC/ENS

Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP

Supply , Installation , Testing and Commissioning of IO . IO for Indoor Camera with Wall Plate white Color .

Supplying and fixing 2 meter length, UTP patch cord of cat 6 type in position as per specification No. WG-COC/PC

Supply , Installation , Testing and Commissioning of Fiber Optics Enclosure . IP65 Rated Fiber Optic Enclosure -with DIN Rail, Standard Pole Mount Clamps and Accessories. With 10A MCB and 6 port Spike Buster.

Supplying and erecting FR grade, pvc armoured multimode armoured multimode optical fibre cable with 6 fibres, with core dia 50/125 µm (OM3) suitable for 1 gbps ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification No. WG-COC/OFC LSZH

Supplying & installing UTP networking cat-6 cable suitable for LAN / WAN Computer net-working as per specification No. WG-COC/NC

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying & laying HMS PVC conduit 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying and fixing 6U wall mount rack (Dimension-DxWxH – 450x550x367 mm) as per specification No. WG-NAS/RAK

Supplying and fixing 24 4 U floor mount rack (Dimension-DxW – 800x600x1265 mm) as per specification No. WG-NAS/RAK

HEAT PUMPSupplying, Insatallation, testing and commissioning of Heat Pumps with the following duty condition and specifications for generation and distribution of hot water: The Heat Pump shall have the following specifications :Out put rate 1000 Ltrs / hr at 30 deg delta T ( For Detail refer Technical Specification and Tender Documnet) Heating Capacity: 36 KW Calerie for each Heat Pump

MIXING TANKSupplying, installation and testing and commissioning of storage type Mixing tank (capacity 4000 Ltrs) made of Mild steel ,tested to a pressure of 8 kg/sq.cm, capable of storing hot water insulated with 50 mm thick Rock wool with wire mesh arround and cladded with 26 SWG aluminum. Mixing tank shall be of dish end type with working pressure of 5 kg/cm2 Shell shall be fabricated with 6 mm thick plate and dished ends with 8 mm thick plates complete with man hole cover, safety valve drain, nozzle, inlet and outlet nozzles pressure gauge. The inner side of the tank shall be coated with FRP coating of 3 mm thickness which can withstand a tempeature of 90 deg C. The mixing tank shall be provided with collors of 2" BSP for provision to instal 6 Numbers of Electrical Heating Coils if required . The Mixing tank shall have thermal sensors for automatic operation and integrated into the electrical sircuit of the circulation pumps and the Heat Pump.

CIRCULATION PUMPSSupply, Testing and commissioning of approved make Circulation Pumps for Hot water circulation between the Heat pump and the Mixing Tank .Discharge : 10.0 cubic mtr/hr @ 20 mteres head (1 working +1 stand by=2 PUMPS=1 set )

Recirculation PumpProviding Recirculation pump with timer to ensure that hot water is available at the user points immediately. Pump capacity 3m3/hr @ 30m head. 1W+1S

SYSTEM CONTROL PANEL Supply, Testing and commissioning of Electrical panel Board for Integration and automatic operation of Circulation pump for Heat Pump with necessary timer. etc complete

SOLAR WATER HEATING SYSTEMSupplying, installing, testing and commissioning of FPC solar water heating system without heat exchanger type of 500 LPD capacity a complete. Specification no. ESD-SHWS-FPC

HEAT PUMPSupplying, Insatallation, testing and commissioning of Heat Pump with the following duty condition and specifications for generation and distribution of hot water:Heating Capacity: 15000 Kilo Calerie for each Heat Pump

MIXING TANKSupplying, installation and testing and commissioning of storage type Mixing tank (capacity 2500 Ltrs) made of Mild steel ,tested to a pressure of 8 kg/sq.cm, capable of storing hot water insulated with 50 mm thick Rock wool with wire mesh arround and cladded with 26 SWG aluminum. Mixing tank shall be of dish end type with working pressure of 5 kg/cm2 Shell shall be fabricated with 6 mm thick plate and dished ends with 8 mm thick plates complete with man hole cover, safety valve drain, nozzle, inlet and outlet nozzles pressure gauge. The inner side of the tank shall be coated with FRP coating of 3 mm thickness which can withstand a tempeature of 90 deg C. The mixing tank shall be provided with collors of 2" BSP for provision to instal 6 Numbers of Electrical Heating Coils if required . The Mixing tank shall have thermal sensors for automatic operation and integrated into the electrical sircuit of the circulation pumps and the Heat Pump.

CIRCULATION PUMPSSupply, Testing and commissioning of approved make Circulation Pumps for Hot water circulation between the Heat pump and the Mixing Tank .Discharge : 5.0 cubic mtr/hr @ 20 mteres head (1 working +1 stand by=2 PUMPS=1 set )

Recirculation PumpProviding Recirculation pump with timer to ensure that hot water is available at the user points immediately. Pump capacity 3m3/hr @ 30m head. 1W+1S

SYSTEM CONTROL PANEL Supply, Testing and commissioning of Electrical panel Board for Integration and automatic operation of Circulation pump for Heat Pump with necessary timer. etc complete (For Detail ReferTechnical Specification and Tender Document)

Supplying, installing, testing and commissioning of FPC solar water heating system without heat exchanger type of 500 LPD capacity a complete. Specification no. ESD-SHWS-FPC

Supply, Installation,Testing & Commissioning of Heat Pump water heater which generates Hot water in the range of 180L/hr. With complete valves fittings etc complete.

MIXING TANKSupplying, installation and testing and commissioning of storage type Stainless steel Mixing tank (capacity300 Ltrs) ,tested to a pressure of 8 kg/sq.cm, capable of storing Treated RO water working pressure of 5 kg/cm2 complete with man hole cover, safety valve drain, nozzle, inlet and outlet nozzles.

CIRCULATION PUMPSSupply, Testing and commissioning of approved make Circulation Pumps for Hot water circulation between the Heat pump and the Mixing Tank .Discharge : 1.0 cubic mtr/hr @ 15 mteres head (1 working +1 stand by=2 PUMPS=1 set )

SYSTEM CONTROL PANEL Supply, Testing and commissioning of Electrical panel Board for Integration and automatic operation of Circulation pump for Heat Pump with necessary timer. etc complete(For Detail ReferTechnical Specification and Tender Document)

SOLAR WATER HEATING SYSTEMSupplying, installing, testing and commissioning of FPC solar water heating system without heat exchanger type of 100 LPD capacity complete. Specification no. ESD-SHWS-FPC

RO UnitSupplying, installing, testing and commissioning of Reverse osmosis system with rated out put flow of 1500 Lts / Hr other essential accessories complete with required suitable high pressure pumps (1working +1standby)

Storage TankSupplying, installation and testing and commissioning of storage type Stainless steel Mixing tank (capacity 5000 Ltrs) ,tested to a pressure of 8 kg/sq.cm, capable of storing Treated RO water working pressure of 5 kg/cm2 complete with man hole cover, safety valve drain, nozzle, inlet and outlet nozzles.

SYSTEM CONTROL PANELSupply, Testing and commissioning of Electrical panel Board for Integration and automatic operation of Circulation pump for Heat Pump with necessary timer. etc complete(For Detail ReferTechnical Specification and Tender Document)

Supplying, installing, testing and commissioning of Reverse osmosis system with rated out put flow of 500 Lts / Hr other essential accessories complete with required suitable high pressure pumps(1working +1standby)

Supplying, installation and testing and commissioning of storage type Storage TankStainless steel Mixing tank (capacity 2000 Ltrs) ,tested to a pressure of 8 kg/sq.cm, capable of storing Treated RO water working pressure of 5 kg/cm2 complete with man hole cover, safety valve drain, nozzle, inlet and outlet nozzles.

SYSTEM CONTROL PANEL Supply, Testing and commissioning of Electrical panel Board for Integration and automatic operation of Circulation pump for Heat Pump with necessary timer. etc complete (For Detail ReferTechnical Specification and Tender Document)

Supply, Installation,Testing & Commissioning of RO water purifier of 10 ltr capacity with complete accessories etc complete.,

Supplying and fixing nominal bore quartzite bulb Extended Coverage Pendent sprinkler 68 Deg.C fast response type including range pipe up to 65 mm dia heavy grade GI pipe confirming to IS 1239 with CI taper special conforming to BS 1641 suspending arrangement with ceiling / wall / beam, clamp clips etc., complete. of model no TY3232 K- factor 5.6 with the coverage area of 37.21 m2.

Supplying and fixing nominal bore Quick response quartzite bulb, sprinkler 141 Deg.C fast response type including range pipe up to 65 mm dia heavy grade GI pipe confirming to IS 1239 with CI taper special conforming to BS 1641 suspending arrangement with ceiling / wall / beam, clamp clips etc., complete. of model no K factor 5.6-8 with the standard coverage Series TY-FRB, 5.6K factor

Supplying, installing, testing and commissioning of submersible cutter pumps (one working and one standby) for pumping sewage water from Near Hostel block to Inlet chamber to DEWATS-02 (solid handling capacity should be less than 30mm).The pump shall be coupled to the adequate H.P. electrical motor, mounted on a common base frame. The rate quoted shall be inclusive of: (For Detail ReferTechnical Specification and Tender Document)

Supplying, installing, testing and commissioning of submersible cutter pumps (one working and one standby) for pumping sewage water from NearAuditorium block to Inlet chamber to DEWATS-03 (solid handling capacity should be less than 30mm).The pump shall be coupled to the adequate H.P. electrical motor, mounted on a common base frame. The rate quoted shall be inclusive of: (For Detail ReferTechnical Specification and Tender Document)

Supplying, installing, testing and commissioning of submersible (one working and one standby) for pumping water from Roof rain water sump to Central Under Ground tank .The pump shall be coupled to the adequate H.P. electrical motor, mounted on a common base frame. The rate quoted shall be inclusive of: (For Detail ReferTechnical Specification and Tender Document)

Supplying, installing, testing and commissioning of submersible (one working and one standby) for pumping water from Roof rain water sump to Central Under Ground tank .The pump shall be coupled to the adequate H.P. electrical motor, mounted on a common base frame. The rate quoted shall be inclusive of: (For Detail ReferTechnical Specification and Tender Document)

Supplying, installing, testing and commissioning of submersible (one working and one standby) for pumping water from Roof rain water sump to Central Under Ground tank .The pump shall be coupled to the adequate H.P. electrical motor, mounted on a common base frame. The rate quoted shall be inclusive of: (For Detail ReferTechnical Specification and Tender Document)

SITC of Electric Traction Passenger Lift with • Rated capacity :- 13 Passengerl884Kg • Floors :- G+2 floor (3StopsI3 Landings) • Travel :- 3 to 4.2 mtrs. • Location of Lift Machine:- MRIMRL • Rated speed :- 1.Omps VS • Doors type :- COPOITOPO Doors with frame having clear opening of 90011000 mm wide x 2000 mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves/ frames Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor Clear Car size of 1600mm wide x 1400mm deep x 2000mm high LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings

The pre-insulated piping system shall include complete cable-type leak detection and location tracking system consisting of a microprocessor based monitoring unit,sensing cable and all auxillary equipments required to provide continuous monitoring of the sensing cable strings for leaks, shorts and breaks. refer technical specifications for further details.(one lot)

Supply, installation, testing and commissioning of 90 mins rating CURTAIN TYPE Fire damper UL 555 certified, constructed with outer shell with 1.6mm thick galvanized steel frame and the blade/Leaf with 1.6mm thick GSS. And with necessary flanges for connection with Fusible Link , extended sleeve 400mm / 600mm with complete boxing & spring mechanism, The damper shall be held open by a replaceable fusible link rated at 74degC as per specifications and drawings. No of fusible Links

Dee Vee Projects Limited

YASHNAND ENGINEERS AND CONTRACTORS PVT.LTD.

NYATI ENGINEERS AND CONSULTANTS JV