C/o Toilet Block at Sub Market Yard, Takarla, Distt. Una H.P.

Amount

Cutting in earth work in by mechanical means all heights and depths in all kinds of soils, including saturated soils comprising of pick work , Jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (Where blasting is prohibited) and their intermediate classification of soil including, dewatring where required, setting out to required lines, levels as shown on the drawing and directed by the Engineer-in - charge at site, according to the HP.PWD. specification of 1990( One Thousand Nine Hundred ninety) Volume-I (One) and sorting out useful and unuseful matreial and Transportation of the unuseful matreial for disposing at dumping site ( To be arranged by the Contractor) as per satisfacation of Engineer -in- Charge through all modes of transportation including head load , animal load or mechnical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechnical means and labour( If required). All useful material such as stone , shingles aggregate and slates Shall be properly Stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation as per direction of the Engineer -in -charge . Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.

Excavation in foundation trenches etc. in earth work in all kinds of classification of soil such as pick work, jumper work, pick jumper work, blasting work, soft and hard blasting and doing work in saturated soil, including chiseling or wedging out rock where blasting is prohibited, or any other mixed variety of soil including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depth or any quantum of water including slush which may arise during dewatering, removal of slush and stacking the excavated soil clear from the edge of excavation with in all leads, as directed by Engineer-in-Charge and then returning the stacked soil in 15cm (fifteen centimeters) layers when required into plinths, sides of foundations etc. consolidating each deposited layer by ramming watering and then disposing of all surplus excavated earth as directed by Engineer-in-Charge with in all leads and lifts, disposed earth to be levelled and neatly dressed including carriage of materials within all leads and lifts.

Providing and laying mechanically mixed and vibrated cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone aggregate 40mm (forty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/heights as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts. The rate inclusive of Malkhana, Royality, Octroi, GST, toll tax or any taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40mm nominal size) excluding cost of form work as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge, In foundation and plinth including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax..

Stone soling tightly hand packed under floors, including watering, ramming and consolidating complete and carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights. below supporting floor to ceiling and removal of the same for in – situ reinforced concrete and plain concrete work in foundation footings, basis of columns etcetera and mass concrete, including carriage of materials. Within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings, shelves, and the like floor, etc. up to any thickness, up to all floor level, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering, strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Columns, pillars, posts and struts, (square, rectangular/ polygonal in plan), up to all floor level, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters)thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers, girders and lintels, sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto any depth/heights, up to all floor level, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing from work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering, strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Edge of slabs and breaks in floors and walls excluding, landing, up to all floor level, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, GST, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and laying M20 grade concrete machanically mixed and vibrated minimum cement contents is 320 Kg/cum with graded crushed stone aggregate having maximum size 20mm and curing complete excluding cost of form work and reinforcement work for reinforced concrete work in Foundation, footings bases of columns including plinth beams including all leads and lifts, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, GST, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and laying M20 grade concrete machanically mixed and vibrated minimum cement contents is 320 Kg/cum with graded crushed stone aggregate having maximum size 20mm and curing complete excluding cost of form work and reinforcement work for reinforced concrete work in suspended floor, roofs, landing, shelves & their supports balconies upto all floor levels including all leads and lifts, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, GST, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and laying M20 grade concrete machanically mixed and vibrated minimum cement contents is 320 Kg/cum with graded crushed stone aggregate having maximum size 20mm and curing complete excluding cost of form work and reinforcement work for reinforced concrete work in columns pillar, posts & struts, upto all floor level including all leads and lifts, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, GST, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and laying Tor steel reinforcement of TATA, sail , Rashtriya Ispat or its substantial equivalent make for Reinforced Cement Concrete work including bending, binding and placing in position complete including cost of binding wire and other incidentals due for its completion up to all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, GST, toll tax or any taxes imposed by the Government.

Providing and laying Second class Brick work in super structure above plinth level upto all floor level: Cement mortar 1:6 (1 cement : 6 Coarse sand) as per Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and laying Second class Half brick masonry in super structure above plinth level upto all floor level. In Cement mortar 1 : 4 (1 cement : 4 coarse sand) as per Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing wood work in frames of doors windows clerestory windows and other frames wrought framed and fixed in position with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) Second class deodar wood, as per Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . a) Second class deodar wood

Providing 40x5 mm flat iron hold fast 40 cm long including fizing to frame with 10 mm diameter bolts nuts and wooden plugs and embedding in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size( as per Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and fixing panelled or paneled and glazed shutters for doors windows and clerestory windows fixing with but hinges of required size with necessary screws all complete as per direction of Engineer-in charge. including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government a) 35 mm thick shutters using Second class deodar wood

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : as per the architectural drawings and the directions of engineer-in-charge and as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) 250X16mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the architectural drawings and the directions of engineer-in-charge and as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) 150x10 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the architectural drawings and the directions of engineer-in-charge and as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) 100x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :as per the architectural drawings and the directions of engineer-in-charge and as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) 100 mm

Providing and laying spartic ceramic/vetrified tiles anti skid (300x300mmx10mm(three hundred into three hundred into ten milimeter) 5.5 mm thick in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm(twelve milimeter) thick cement mortar 1:3 (one cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges. The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Providing and laying white / coloured glazed tiles of 8mm (eight milimeter) thick in skirting riser of steps and dado on 12mm (twelve milimeter) thick cement mortar 1:3(one cement:three sand) (300x600mm size ) and jointed with cement slurry complete in all floors and heights as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One),including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.`The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

6mm (six millimeter) thick cement plaster to ceiling with cement mortar 1:4 (one cement isto four sand), upto all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.

15 (Fifteen) millimeters thick cement plaster in single coat on the rough side of brick/concrete/ stone walls for interior plastering up to all heights including arises. Internal rounded angles, chamfers and/or rounded angles not exceeding 80 (Eighty) millimeters in girth and finished even and smooth in cement mortar 1:6(One cement: Six sand)as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

15 (Fifteen) millimeters thick cement plaster in single coat on the fair side of brick/concrete/ stone walls for interior plastering up to all heights including arises. Internal rounded angles, chamfers and/or rounded angles not exceeding 80 (Eighty) millimeters in girth and finished even and smooth in cement mortar 1:6(One cement: Six sand)as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and applying Birla white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.including carriage of materials with in all leads & lifts as per direction / satisfaction of the Engineer-in-charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Distempering with oil bound washable distemper of approved brand and manfacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer,as per approved drawing, design and as directed by the Engineer-in-Chargeas per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surface New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc.with in all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Applying priming coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Painting wood work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 75 ltr/10 sqm of approved brand and manufacture,as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto all leads and lifts also including ramming and watering of the earth in layers not exceeding 20 cm complete consolidating each deposited layer by ramming watering aas directed by Engineer-in-Charge with in all leads and lifts, disposed earth to be levelled and neatly dressed including carriage of materials within all leads and lifts

Providing & laying steel work of TATA,SAIL or RASHTRIYA ISPAT or its equivalent welded in built up section/ hollow section trusses & framed work, including cutting,hoisting & fixing in position including applying a priming coat of red lead paint in beams joists channels, angles, tee,flats with connecting plates or angle cleats as in main and cross beams, hip and rafters,purlins connected to common rafters and the like as per HP. PWD. Specifications of 1990 vplume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) In grating,framed guards,bars ladders,railing brackets and similar works.

WS&SI Providing and fixing PVC Supreme or its equivalent, waste and ventilating pipes jointed properly with solution approved adhesive complete, as per HP.PWD specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads lifts and all incidental charges. a) 75 mm dia pipe

Providing and fixing PVC Supreme or its equivalent, waste and ventilating pipes jointed properly with solution approved adhesive complete, as per HP.PWD specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads lifts and all incidental charges. a) 110 mm dia pipe

Providing and fixing PVC Supreme or its equivalent, waste and ventilating pipes accessories including filling the joints with approved adhesive complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) Plain bend 75mm dia.

Providing and fixing PVC Supreme or its equivalent, waste and ventilating pipes accessories including filling the joints with approved adhesive complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) Plain bend 110mm dia.

Providing and fixing PVC door bend with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) 75 (Seventy five) millimetres nominal size.

Providing and fixing PVC door bend with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) 110 (One Hundred Ten) millimetres nominal size.

Providing and fixing PVC single equal branch with oval access ISI marked including fixing with approved adhesive etcetera complete 110mm (one hundred ten millimeters) dia meter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.. a) 75 (Seventy Five) millimetres nominal size.

Providing and fixing PVC single equal branch with oval access ISI marked including fixing with approved adhesive etcetera complete 110mm (one hundred ten millimeters) dia meter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.. a) 110 (One hundred Ten) millimetres nominal size.

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etcetera complete 110mm (one hundred ten millimeters) dia meter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.. a) 75 (Seventy Five) millimetres nominal size.

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etcetera complete 110mm (one hundred ten millimeters) dia meter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.. a) 110 (One hundred Ten) millimetres nominal size.

Providing and fixing PVC ( poly vinyl chloride) collars ISI marked including fixing with approved adhesive etcetera complete , 110mm (one hundred ten millimeter) dia meter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes including fixing with approved adhesive etc. complete including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) 75 (Seventy Five) millimetres nominal size.

Providing and fixing PVC ( poly vinyl chloride) collars ISI marked including fixing with approved adhesive etcetera complete , 110mm (one hundred ten millimeter) dia meter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes including fixing with approved adhesive etc. complete including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) 110 (One hundred ten) millimetres nominal size.

Providing and Fixing PVC double equal branch plain of approved make etc. 75 mm dia , includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and Fixing PVC double equal branch plain of approved make etc. 110 mm dia, includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and Fixing PVC double equal branch with oval access doors of approved make etc. 75 mm dia, includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and Fixing PVC double equal branch with oval access doors of approved make etc. 110 mm dia, includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and Fixing PVC clamps ISI marked 75 mm dia, includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and Fixing PVC clamps ISI marked 110 mm dia, includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providng and fixing PVC floor trap of self cleaning design with sand cast iron screwed down or hinged grating without vent arm complete including cost of cutting and making good the walls and floors 110mm x 75mm, including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and fixing C.P. brass bib tap of approved quality conforming to IS:8931 : 15 mm nominal boreas per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and fixing Vitreous China wash basin of size 630x450 mm of Cera/ Hindaware or its equivalent make with a single hole for C.P. brass pillar tap, bed concrete complete, as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges..

Providing and fixing CP Brass waste pipe for sink or wash basin including PVC waste fittigs complete, Semi regid pipe 32 mm dia, includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and Fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete and as directed by the Engineer-in-Chargeas per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing 15mm dia.C.P. brass pillar tap ISI marked as per HPPWD Specificationswith capstan head including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing C.P. brass angle cock for basin mixer and geyser points of approved quality conforming to IS:8931. 15mm nominal bore as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and fixing to wall ceiling and floors galvanized mild steel tubes (medium grade) tube 15 (Fifteen) millimeters nominal bore, fitting and clamps including making good the wall ceiling and floors ISI marked as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank 1000 ltr, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.(2 Nos 5000 Ltr.) as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and fixing Float valve of approved make ,includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and fixing Wheel valve of approved make 15 mm ,includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and fixing PTMT coloured/ white high density polyethylene / polypropylene HIND WARE/CERA MAKE or its equivalent poly Venyl Chloride 10/ 12.50 / 15 liters capacity (full flush )European standard control low level dual flushing cistern with a pair of CI or MS brackets complete with fittings such as lead valves syphon, 15mm (fifteen millimeter) nominal size PVC ball valve with polythene float, CP brass handles, unions and couplings for connection with inlet, outlet and over flow pipes 40mm (forty millimeters) dia meter including Chromium plated flush bend and cutting holes in walls and making good the same and connecting the flush bend with cistern and closet ( over flow pipe to be measured and paid for separately ) complete including carriage of materials within all leads, lifts and other incidental or as directed by the Engineerin-Charge and all type of taxes imposed by the Government.

Providing and fixing CP Soap dish complete in all respect, includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and fixing CP towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms and satisfaction of Engineer In-charge and as directed by the Engineer-in-Chargeas per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and fixing vitreous China wash down,water closet European seat (PRIMA) No. 20012 of Hindware/Cera Make with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to be measured and paid for separately) as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) Ordinary Closet

Providing and fixing plastic Seat (solid/hollow type) and cover of Cera make or its equivalent for wash down water closet with CP brass hinges and rubber buffers solid type black plastic sheet and cover, as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts and other incidental or as directed by the Engineerin-Charge and all type of taxes imposed by the Government.

Providing and fixing PTMT jet spray of approved quality and colour with 1. mtr tube. as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing HIND WARE/CERA MAKE or its equivalent bowl pattern Urinal (vitreous china) of size 430x260mm(four hundred thirty into two hundred sixty milimeter) including fittings complete in all respect including brackets and all accessories as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts and other incidental or as directed by the Engineerin-Charge and all type of taxes imposed by the Government. a) Flat Back Type

Providing and fixing division plate of viterous china for urinal of white shade Hind ware Cera or its equivalent 600*300 (Six hundred into Three hundred) millimeter’s size for urinal, as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges or as directed by the Engineerin-Charge and all type of taxes imposed by the Government.

Constructing masonry Chamber 455x450x450 deep cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and fixing 100mm(one hundred milimeter) C.P. grating ISI marked as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing PTMT coloured/ white automatic flushing cistern with a pair of PVC/ C.I. Or M.S. brackets complete with fittings including PVC Syphonic apparatus,mosquito proof lid, PVCunions and coupling for connections with inlet, outlet and overflow pipes including cutting holes and making good the same (overflow pipe to be measured and paid for separately) :- 5 litres capacity :-as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges.

Constructing manhole with RCC top slab in 1:2:4 mix in ( 1 Cement : 2 sand : 4 graded stone aggregate 20mm nominal size) foundation Concrete 1:4:8 ( 1 cement : 4 sand : 8 graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1 : 3 ( 1 Cement : 3 sand ) finished with a floating coat of neat cement and making channels in concrete 1:2:4 mix ( 1 cement : 2 sand : 4 graded stone aggregates 20mm nominal size ) finished smooth complete including curing and testing :- (1) Inside size 800mm x 800mm and 500mm deep including C.I cover with frame ( light duty single seal pattern - 1 ) 455mm x 610mm internal dimentions total Weight of cover and frame to be not less than 38 kg ( Weight of cover 23kg and weight of frame 15kg). ( a) With 200mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 ( 1 cement : 3 sand ) including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Supplying of brick bats brick Aggregate (Single size) 63 mm nominal size (Material 285),as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Electrical Installation :- Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) Group B

Supplying and fixing metal box of 180mmx100mm x60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc. as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge.

Supplying and fixing piano type switch and socket with 5/6 Amp. One way switch piano type, connections, painting etc. as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge.

Supplying and fixing piano type switch and socket with 5 Pin 5/6 Amp. socket outlet piano type, connections, painting etc. as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1No. HRFRLS / PVC insulated single core copper conductor cable of same size for earthing as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge. 2x1.5 sq. mm

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1No. HRFRLS / PVC insulated single core copper conductor cable of same size for earthing as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge. 2x4.0 sq. mm

Supplying and fixing bakelite batten/angle holder of approved make including connections etc. as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge. Single Pole Cat.-A

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required complete with all leads,lift of materials and other incidentals complete. 63 Amps. Cat-B.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge. Single Door -6 way

Providing and Fixing ultra slim decorative extruded box fixture with domestic electronic ballast, snap on installer suitable for 28 watt FTL(T5) complete witll accessories, as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge.

Supplying and Fixing 10sqmm service wire of approved brand and manufacture etc., as required complete with connections and with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge.

Satish Kumar